+# Copyright (C) 2014-2020 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
def main():
- #[project] NewGEOM
- #[Scenario] Extrusion_003
- #[Topic] 'Extrusion_cut' functionality
- #[Tested functionality]
- #[Summary description]
- #[Expected results]
- #[General comments]
-
+ # [project] SHAPER
+ # [Scenario] Extrusion_003
+ # [Topic] 'Extrusion_cut' functionality
+ # [Tested functionality]
+ # [Summary description]
+ # [Expected results]
+ # [General comments]
+
source(findFile("scripts", "common.py"))
-
- #[section] Application start
- #[step] Launch SALOME
+
+ # [section] Application start
+ # [step] Launch SALOME
startApplication("salome_run.sh")
set_defaults()
-
- #[step] Open 'for_extrusion_001.hdf'
+
+ # [step] Open 'for_extrusion_001.hdf'
open(DATA_PATH + "/for_extrusion_003.hdf")
-
- #[step] Activate NewGeom
- clickButton(waitForObject(":SALOME*.NewGeom_QToolButton"))
-
+
+ # [step] Activate SHAPER
+ clickButton(waitForObject(":SALOME*.Shaper_QToolButton"))
+
# [step] Activate Part_1
waitForObjectItem(":Object browser_XGUI_DataTree", "Part\\_1 (Not loaded)")
clickItem(":Object browser_XGUI_DataTree", "Part\\_1 (Not loaded)", 71, 10, 0, Qt.LeftButton)
openItemContextMenu(waitForObject(":Object browser_XGUI_DataTree"), "Part\\_1 (Not loaded)", 70, 9, 0)
activateItem(waitForObjectItem(":_QMenu", "Activate"))
-
- #[step] Fit all
+
+ # [step] Fit all
fit_all()
-
- #[step] Features - ExtrusionCut
+ test.vp("INIT")
+
+ # [step] Features - ExtrusionCut
mouseClick(waitForObjectItem(":SALOME*_QMenuBar", "Features"))
mouseClick(waitForObjectItem(":_QMenu", "ExtrusionCut"))
-
- #[step] Select the upper face for sketching
+
+ # [step] Select the upper face for sketching
mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 243, 171, 0, Qt.LeftButton)
-
- #[step] Draw closing contour, consisting from 4 lines
+
+ # [step] Click "Set plane view" in property panel [vp PLANE]
+ clickButton(waitForObject(":Sketcher plane.Set plane view_QPushButton"))
+ test.vp("PLANE")
+
+ # [step] Draw closing contour, consisting from 4 lines
lines_create_in_view([(83, 152), (85, 346), (669, 344), (669, 162), (83, 152)])
-
- #[step] Ok
+
+ # [check] Check that lines have been executed successfully [cp LINES]
+ fit_all()
+ test.vp("LINES")
+
+ # [step] Ok
clickButton(waitForObject(":Sketch.property_panel_ok_QToolButton"))
- #[step] Define value of 'To size' parameter of extrusionCut, set it equal to 50
+ # [step] Define value of 'To size' parameter of extrusionCut, set it equal to 50
type(waitForObject(":Extrusion.to_size_ModuleBase_ParamSpinBox_2"), "<Ctrl+A>")
type(waitForObject(":Extrusion.to_size_ModuleBase_ParamSpinBox_2"), 50)
+ type(waitForObject(":Extrusion.to_size_ModuleBase_ParamSpinBox_2"), "<Return>")
- #[step] Define value of 'From size' parameter of extrusionCut, set it equal to 50
+ # [check] Check that preview updated [cp PREVIEW_TO_SIZE]
+ fit_all()
+ test.vp("PREVIEW_TO_SIZE")
+
+ # [step] Define value of 'From size' parameter of extrusionCut, set it equal to 50
type(waitForObject(":Extrusion.from_size_ModuleBase_ParamSpinBox_2"), "<Ctrl+A>")
type(waitForObject(":Extrusion.from_size_ModuleBase_ParamSpinBox_2"), 50)
-
- #[step] Ok
+ type(waitForObject(":Extrusion.from_size_ModuleBase_ParamSpinBox_2"), "<Return>")
+
+ # [check] Check that preview updated [cp PREVIEW_FROM_SIZE]
+ fit_all()
+ test.vp("PREVIEW_FROM_SIZE")
+
+ # [step] Ok
clickButton(waitForObject(":ExtrusionCut.property_panel_ok_QToolButton"))
-
- #[step] Click 'Reset view' toolbar button
- clickButton(waitForObject(":SALOME*.Reset_QToolButton"))
-
- #[check] Check that extrusionCut operation has been executed successfully
- test.vp("VP1")
-
+
+ # [step] Click 'Reset view' toolbar button
+ clickButton(waitForObject(":SALOME*.Reset_QToolButton_2"))
+ mouseClick(waitForObject(":SALOME*_OCCViewer_ViewPort3d"), 10, 450, 0, Qt.LeftButton) # close tool bar extension bar
+
+ # [check] Check that extrusionCut operation has been executed successfully [vp EXTRUSION_CUT]
+ test.vp("EXTRUSION_CUT")
+
# [step] Close application without saving
close_application()
