+# Copyright (C) 2014-2020 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
def main():
- #[project] NewGEOM
- #[Scenario] Extrusion_002
- #[Topic] 'Extrusion by boarding planes and offsets' functionality
- #[Tested functionality]
- #[Summary description]
- #[Expected results]
- #[General comments]
-
+ # [project] SHAPER
+ # [Scenario] Extrusion_002
+ # [Topic] 'Extrusion by boarding planes and offsets' functionality
+ # [Tested functionality]
+ # [Summary description]
+ # [Expected results]
+ # [General comments]
+
source(findFile("scripts", "common.py"))
-
- #[section] Application start
- #[step] Launch SALOME
+
+ # [section] Application start
+ # [step] Launch SALOME
startApplication("salome_run.sh")
set_defaults()
-
- #[step] Open 'for_extrusion_001.hdf'
+
+ # [step] Open 'for_extrusion_001.hdf'
open(DATA_PATH + "/for_extrusion_002.hdf")
-
- #[step] Activate NewGeom
- clickButton(waitForObject(":SALOME*.NewGeom_QToolButton"))
-
- #[step] Activate Part_1
+
+ # [step] Activate SHAPER
+ clickButton(waitForObject(":SALOME*.Shaper_QToolButton"))
+
+ # [step] Activate Part_1
waitForObjectItem(":Object browser_XGUI_DataTree", "Part\\_1 (Not loaded)")
clickItem(":Object browser_XGUI_DataTree", "Part\\_1 (Not loaded)", 48, 10, 0, Qt.LeftButton)
openItemContextMenu(waitForObject(":Object browser_XGUI_DataTree"), "Part\\_1 (Not loaded)", 48, 10, 0)
activateItem(waitForObjectItem(":_QMenu", "Activate"))
-
- #[step] Fit all
+
+ # [step] Fit all
fit_all()
- #[step] Execute extrusion for sketch_1
+ test.vp("INIT")
+
+ # [step] Execute extrusion for sketch_1
mouseClick(waitForObjectItem(":SALOME*_QMenuBar", "Features"))
mouseClick(waitForObjectItem(":_QMenu", "Extrusion"))
-
- #[step] Select sketch_1 as base
+
+ # [step] Select sketch_1 as base
mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 324, 222, 0, Qt.LeftButton)
-
- #[step] Select 'By boarding planes and offsets' button
+
+ # [step] Select 'By boarding planes and offsets' button
clickButton(waitForObject(":Extrusion_QToolButton"))
-
- #[check] Check that no result is previewed
- test.vp("VP1")
-
- #[step] Select upper face as face 'To'
+
+ # [check] Check that no result is previewed [vp NO_PREVIEW]
+ fit_all()
+ test.vp("NO_PREVIEW")
+
+ # [step] Select upper face as face 'To'
mouseClick(waitForObject(":Extrusion.Select a sketch face_QListWidget"), 80, 47, 0, Qt.LeftButton)
mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 350, 231, 0, Qt.LeftButton)
mouseClick(waitForObject(":To_QLineEdit"), 31, 11, 0, Qt.LeftButton)
mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 369, 87, 0, Qt.LeftButton)
-
- #[check] Check that preview is updated
- test.vp("VP2")
-
- #[step] Select lower face as face 'From'
+
+ # [check] Check that preview is updated [vp PREVIEW_TO]
+ fit_all()
+ test.vp("PREVIEW_TO")
+
+ # [step] Select lower face as face 'From'
mouseClick(waitForObject(":From_QLineEdit"), 80, 11, 0, Qt.LeftButton)
mouseClick(waitForObject(":SALOME*.3D View Operations_OCCViewer_ViewPort3d"), 350, 413, 0, Qt.LeftButton)
-
- #[check] Check that preview is updated
- test.vp("VP3")
-
- #[step] Define offset for face 'To'
+
+ # [check] Check that preview is updated [vp PREVIEW_FROM]
+ test.vp("PREVIEW_FROM")
+
+ # [step] Define offset for face 'To'
type(waitForObject(":To.to_offset_ModuleBase_ParamSpinBox"), "<Ctrl+A>")
type(waitForObject(":To.to_offset_ModuleBase_ParamSpinBox"), 200)
+ type(waitForObject(":To.to_offset_ModuleBase_ParamSpinBox"), "<Return>")
- #[step] Fit all
+ # [step] Fit all
fit_all()
-
- #[check] Check that preview is updated
- test.vp("VP4")
-
- #[step] Define offset for face 'From'
+
+ # [check] Check that preview is updated [vp PREVIEW_TO_OFFSET]
+ test.vp("PREVIEW_TO_OFFSET")
+
+ # [step] Define offset for face 'From'
type(waitForObject(":From.from_offset_ModuleBase_ParamSpinBox"), "<Ctrl+A>")
type(waitForObject(":From.from_offset_ModuleBase_ParamSpinBox"), 200)
+ type(waitForObject(":From.from_offset_ModuleBase_ParamSpinBox"), "<Return>")
+
+ # [step] Fit all
+ fit_all()
- #[step] Fit all
- fit_all()
+ # [check] Check that preview is updated [vp PREVIEW_FROM_OFFSET]
+ test.vp("PREVIEW_FROM_OFFSET")
- #[check] Check that preview is updated
- test.vp("VP5")
-
- #[step] Ok
+ # [step] Ok
clickButton(waitForObject(":Extrusion.property_panel_ok_QToolButton"))
-
- #[step] Fit all
- fit_all()
-
- #[check] Check that extrusion is built
- test.vp("VP6")
+
+ # [step] Fit all
+ fit_all()
+
+ # [check] Check that extrusion is built [vp EXTRUSION]
+ test.vp("EXTRUSION")
# [step] Close application without saving
close_application()
