-# -*- coding: utf-8 -*-
-
-## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
+# Copyright (C) 2014-2022 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
from GeomAPI import *
from SketchAPI import *
SketchConstraintCoincidence_10 = Sketch_1.setCoincident(SketchCircle_2.center(), SketchLine_3.result())
SketchConstraintCoincidence_10.setName("SketchConstraintCoincidence_11")
SketchConstraintEqual_1 = Sketch_1.setEqual(SketchArc_1.results()[1], SketchArc_2.results()[1])
-SketchArc_3 = Sketch_1.addArc(9.077705920073647e-31, -3.860574861749558e-31, 15.46247221747307, -11.0413745939477, 18.89444362769119, -2, False)
+SketchArc_3 = Sketch_1.addArc(0, 0, 15.46247221747307, -11.0413745939477, 18.89444362769119, -2, False)
SketchArc_3.setName("SketchArc_7")
SketchArc_3.result().setName("SketchArc_7")
SketchArc_3.results()[1].setName("SketchArc_7_2")
SketchConstraintCoincidence_11 = Sketch_1.setCoincident(SketchPoint_1.coordinates(), SketchArc_3.center())
SketchConstraintCoincidence_11.setName("SketchConstraintCoincidence_54")
-SketchArc_4 = Sketch_1.addArc(3.497294868556922e-32, 3.186289860391258e-33, 18.89444362769119, 2, 15.46247221747308, 11.04137459394768, False)
+SketchArc_4 = Sketch_1.addArc(0, 0, 18.89444362769119, 2, 15.46247221747308, 11.04137459394768, False)
SketchArc_4.setName("SketchArc_8")
SketchArc_4.result().setName("SketchArc_8")
SketchArc_4.results()[1].setName("SketchArc_8_2")
SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchArc_3.startPoint(), SketchArc_6.startPoint())
SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_57")
SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchArc_6.results()[1])
-SketchLine_4 = Sketch_1.addLine(17.5, 15, 37.99999999999999, 15)
+SketchLine_4 = Sketch_1.addLine(17.5, 15, 38, 15)
SketchLine_4.setName("SketchLine_42")
SketchLine_4.result().setName("SketchLine_42")
SketchConstraintCoincidence_15 = Sketch_1.setCoincident(SketchArc_5.endPoint(), SketchLine_4.startPoint())
SketchLine_6.result().setName("SketchLine_45")
SketchConstraintCoincidence_17 = Sketch_1.setCoincident(SketchArc_4.startPoint(), SketchLine_6.startPoint())
SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_61")
-SketchLine_7 = Sketch_1.addLine(37.99999999999999, 15, 38.00000000000001, 5.505556372308819)
+SketchLine_7 = Sketch_1.addLine(38, 15, 38, 5.505556372308819)
SketchLine_7.setName("SketchLine_46")
SketchLine_7.result().setName("SketchLine_46")
SketchConstraintCoincidence_18 = Sketch_1.setCoincident(SketchLine_4.endPoint(), SketchLine_7.startPoint())
SketchConstraintHorizontal_5.setName("SketchConstraintHorizontal_14")
SketchConstraintVertical_1 = Sketch_1.setVertical(SketchLine_7.result())
SketchConstraintVertical_1.setName("SketchConstraintVertical_7")
-SketchLine_8 = Sketch_1.addLine(40, 17, 40, -17.00000000000001)
+SketchLine_8 = Sketch_1.addLine(40, 17, 40, -17)
SketchLine_8.setName("SketchLine_47")
SketchLine_8.result().setName("SketchLine_47")
SketchLine_8.setAuxiliary(True)
SketchConstraintRadius_6.setName("SketchConstraintRadius_13")
SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_4.endPoint(), SketchLine_8.result(), "2*coeff")
SketchConstraintDistance_6.setName("SketchConstraintDistance_19")
-SketchArc_7 = Sketch_1.addArc(40, 2.220450266386716e-15, 34.49444362769118, 2, 38.00000000000001, 5.505556372308819, True)
+SketchArc_7 = Sketch_1.addArc(40, 0, 34.49444362769118, 2, 38, 5.505556372308819, True)
SketchArc_7.setName("SketchArc_11")
SketchArc_7.result().setName("SketchArc_11")
SketchArc_7.results()[1].setName("SketchArc_11_2")
SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_66")
SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_6.endPoint(), SketchArc_7.startPoint())
SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_67")
-SketchArc_8 = Sketch_1.addArc(40.00000000000001, -2.652239435709897e-15, 34.49444362769118, -2, 37.95784774655168, -5.490060577298436, False)
+SketchArc_8 = Sketch_1.addArc(40, 0, 34.49444362769118, -2, 37.95784774655168, -5.490060577298436, False)
SketchArc_8.setName("SketchArc_12")
SketchArc_8.result().setName("SketchArc_12")
SketchArc_8.results()[1].setName("SketchArc_12_2")
SketchConstraintRadius_8.setName("SketchConstraintRadius_15")
SketchConstraintDistance_8 = Sketch_1.setDistance(SketchCircle_5.center(), SketchLine_2.result(), "4*coeff")
SketchConstraintDistance_8.setName("SketchConstraintDistance_22")
-SketchLine_10 = Sketch_1.addLine(17.5, -15, 34.00000000000001, -15)
+SketchLine_10 = Sketch_1.addLine(17.5, -15, 34, -15)
SketchLine_10.setName("SketchLine_43")
SketchLine_10.result().setName("SketchLine_43")
SketchConstraintCoincidence_31 = Sketch_1.setCoincident(SketchArc_6.endPoint(), SketchLine_10.startPoint())
SketchConstraintCoincidence_31.setName("SketchConstraintCoincidence_73")
-SketchArc_10 = Sketch_1.addArc(34.00000000000001, -13.48076923076937, 34.00000000000001, -15, 35.51437699680511, -13.35942492012782, False)
+SketchArc_10 = Sketch_1.addArc(34, -13.48076923076937, 34, -15, 35.51437699680511, -13.35942492012782, False)
SketchArc_10.setName("SketchArc_14")
SketchArc_10.result().setName("SketchArc_14")
SketchArc_10.results()[1].setName("SketchArc_14_2")
SketchLine_12.setName("SketchLine_50")
SketchLine_12.result().setName("SketchLine_50")
model.do()
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_4_2f-SketchLine_6r-SketchLine_10f-SketchArc_2_2f")], model.selection(), "h_p*coeff", 0)
-Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face_1"))
-SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchCircle_2_2"))
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchArc_4_2f-SketchLine_10f-SketchArc_2_2f-SketchLine_6r-SketchArc_8_2f-SketchArc_9_2r-SketchLine_42f-SketchLine_46f-SketchArc_11_2f-SketchLine_45r-SketchArc_15_2r-SketchArc_16_2f-SketchLine_51f-SketchArc_17_2f-SketchLine_52r-SketchLine_50r-SketchCircle_11_2r-SketchArc_22_2f-SketchArc_21_2r-SketchLine_55f-SketchArc_20_2r-SketchArc_19_2f-SketchLine_54r-SketchArc_18_2f-SketchLine_53r-SketchArc_7_2f-SketchLine_44f-SketchArc_12_2f-SketchLine_48f-SketchArc_13_2f-SketchArc_14_2r-SketchLine_43r-SketchArc_10_2r-SketchCircle_1_2r-SketchCircle_2_2r_wire")], model.selection(), "h_p*coeff", 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
+SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/SketchCircle_2_2"))
SketchCircle_6 = SketchProjection_1.createdFeature()
SketchCircle_6.setName("SketchCircle_5")
SketchCircle_6.result().setName("SketchCircle_5")
SketchCircle_6.results()[1].setName("SketchCircle_5_2")
-SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchCircle_4_2"))
+SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "Sketch_1/SketchCircle_4_2"))
SketchCircle_7 = SketchProjection_2.createdFeature()
SketchCircle_7.setName("SketchCircle_6")
SketchCircle_7.result().setName("SketchCircle_6")
SketchConstraintRadius_9.setName("SketchConstraintRadius_6")
model.do()
Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), "10*coeff", 0)
-ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchCircle_3_2f")], model.selection(), "p_trou1*coeff", 0, [model.selection("SOLID", "Extrusion_1_1")])
-ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchCircle_1_2r")], model.selection(), "p2_trou1*coeff", 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchCircle_3_2f_wire")], model.selection(), "p_trou1*coeff", 0, [model.selection("SOLID", "Extrusion_1_1")])
+ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchCircle_1_2f-SketchCircle_3_2r_wire")], model.selection(), "p2_trou1*coeff", 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchCircle_4_2f")], model.selection(), "p_trou2*coeff", 0, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "ExtrusionCut_2_1")])
-ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchCircle_2_2r")], model.selection(), "p2_trou*coeff", 0, [model.selection("SOLID", "ExtrusionCut_3_2")])
+ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchCircle_2_2f-SketchCircle_4_2r_wire")], model.selection(), "p2_trou*coeff", 0, [model.selection("SOLID", "ExtrusionCut_3_2")])
Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/XOY"), "22.5*coeff", False)
Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_1"), "45*coeff", True)
Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2"))
-SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_3"))
+SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_4_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6]"), False)
SketchLine_18 = SketchProjection_3.createdFeature()
SketchLine_18.setName("SketchLine_4")
SketchLine_18.result().setName("SketchLine_4")
-SketchProjection_4 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/Edge-SketchLine_6"))
+SketchProjection_4 = Sketch_3.addProjection(model.selection("EDGE", "Sketch_1/SketchLine_6"))
SketchLine_19 = SketchProjection_4.createdFeature()
SketchLine_19.setName("SketchLine_5")
SketchLine_19.result().setName("SketchLine_5")
SketchConstraintDistance_14 = Sketch_3.setDistance(SketchLine_23.result(), SketchLine_25.startPoint(), "2.5*coeff")
SketchConstraintDistance_14.setName("SketchConstraintDistance_12")
model.do()
-Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_9r-SketchLine_12r-SketchLine_14r-SketchLine_26r-SketchLine_27r-SketchLine_28r")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_1"), 0, model.selection(), 0)
-Boolean_1 = model.addSmash(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], [model.selection("SOLID", "ExtrusionCut_4_1")])
-ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchCircle_8_2f")], model.selection(), 10, 0, [model.selection("SOLID", "Boolean_1_1_1")])
+Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Face-SketchLine_14r-SketchLine_27r-SketchLine_26r-SketchLine_28r-SketchLine_12r-SketchLine_9r-SketchCircle_8_2r_wire")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_10"), 0, model.selection(), 0)
+Smash_1 = model.addSmash(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], [model.selection("SOLID", "ExtrusionCut_4_1")])
+ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_3/Face-SketchCircle_8_2f_wire")], model.selection(), 10, 0, [model.selection("SOLID", "Smash_1_1_1")])
ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_8_2f")], model.selection(), 10, 0, [model.selection("SOLID", "ExtrusionCut_5_1_1")])
-Axis_4 = model.addAxis(Part_1_doc, model.selection("FACE", "ExtrusionCut_6_1_2/Modfied_1"))
Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
SketchProjection_7 = Sketch_4.addProjection(model.selection("EDGE", "PartSet/OY"))
SketchLine_28 = SketchProjection_7.createdFeature()
SketchConstraintVertical_6.setName("SketchConstraintVertical_3")
SketchConstraintVertical_7 = Sketch_4.setVertical(SketchLine_32.result())
SketchConstraintVertical_7.setName("SketchConstraintVertical_4")
-SketchConstraintHorizontal_9 = Sketch_4.setHorizontal(SketchLine_30.result())
SketchConstraintEqual_7 = Sketch_4.setEqual(SketchLine_31.result(), SketchLine_32.result())
SketchConstraintEqual_7.setName("SketchConstraintEqual_5")
SketchConstraintMiddle_4 = Sketch_4.setMiddlePoint(SketchLine_30.result(), SketchAPI_Line(SketchLine_29).startPoint())
SketchConstraintLength_10 = Sketch_4.setLength(SketchLine_36.result(), 12.975642079145)
SketchConstraintLength_10.setName("SketchConstraintLength_7")
model.do()
-Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchLine_19f-SketchLine_20f-SketchLine_24f-SketchLine_21f-SketchLine_22f-SketchLine_23f")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), 0, model.selection(), 0)
-Boolean_2 = model.addSmash(Part_1_doc, [model.selection("SOLID", "ExtrusionCut_6_1_1"), model.selection("SOLID", "Extrusion_4_1")], [model.selection("SOLID", "ExtrusionCut_6_1_2")])
-ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_9_2f")], model.selection(), 0, 10, [model.selection("SOLID", "Boolean_2_1_1")])
+Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Face-SketchLine_19f-SketchLine_20f-SketchLine_21f-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchCircle_9_2r_wire")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6"), 0, model.selection(), 0)
+Smash_2 = model.addSmash(Part_1_doc, [model.selection("SOLID", "Extrusion_4_1")], [model.selection("COMPSOLID", "ExtrusionCut_6_1")])
+ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_9_2f")], model.selection(), 0, 10, [model.selection("SOLID", "Smash_2_1_3")])
ExtrusionCut_8 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_9_2f")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_7_1_1")])
-Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Boolean_2_1_1/Modified_1"))
+Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Smash_2_1_3/Modified_Face&Extrusion_1_1/From_Face"))
SketchPoint_3 = Sketch_5.addPoint(model.selection("VERTEX", "PartSet/Origin"))
SketchPoint_3.setName("SketchPoint_2")
SketchPoint_3.result().setName("SketchPoint_2")
SketchLine_39.result().setName("SketchLine_31")
SketchConstraintDistance_17 = Sketch_5.setDistance(SketchLine_37.result(), SketchLine_38.startPoint(), "epaisseur*coeff")
SketchConstraintDistance_17.setName("SketchConstraintDistance_13")
-SketchArc_19 = Sketch_5.addArc(2.175718373563154e-31, -6.039735315912772e-31, -13.96424004376904, 17, -13.964240043769, -17, False)
+SketchArc_19 = Sketch_5.addArc(0, 0, -13.964240043769, 17, -13.964240043769, -17, False)
SketchArc_19.setName("SketchArc_5")
SketchArc_19.result().setName("SketchArc_5")
SketchArc_19.results()[1].setName("SketchArc_5_2")
SketchConstraintCoincidence_59 = Sketch_5.setCoincident(SketchArc_19.endPoint(), SketchLine_37.startPoint())
SketchConstraintCoincidence_59.setName("SketchConstraintCoincidence_40")
model.do()
-Extrusion_5 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchLine_29r-SketchLine_30r-SketchArc_5_2r-SketchLine_32r")], model.selection(), 0, "22*coeff")
+Extrusion_5 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_5_2r-SketchLine_30r-SketchLine_32r-SketchLine_29r")], model.selection(), 0, "22*coeff")
Sketch_6_origin = GeomAPI_Pnt(0, 0, 0)
Sketch_6_norm = GeomAPI_Dir(0, 1, 0)
Sketch_6_dirx = GeomAPI_Dir(1, 0, 0)
SketchLine_41 = Sketch_6.addLine(-32, -17, -32, 17)
SketchLine_41.setName("SketchLine_33")
SketchLine_41.result().setName("SketchLine_33")
-SketchPoint_4 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/Vertex-SketchLine_32s-SketchLine_29e"))
+SketchPoint_4 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/SketchLine_29_EndVertex"))
SketchPoint_4.setName("SketchPoint_3")
SketchPoint_4.result().setName("SketchPoint_3")
SketchConstraintCoincidence_60 = Sketch_6.setCoincident(SketchLine_41.startPoint(), SketchPoint_4.result())
SketchConstraintCoincidence_60.setName("SketchConstraintCoincidence_41")
-SketchPoint_5 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/Vertex-SketchLine_30s-SketchLine_32e"))
+SketchPoint_5 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/SketchLine_30_StartVertex"))
SketchPoint_5.setName("SketchPoint_4")
SketchPoint_5.result().setName("SketchPoint_4")
SketchConstraintCoincidence_61 = Sketch_6.setCoincident(SketchLine_41.endPoint(), SketchPoint_5.result())
SketchConstraintCoincidence_61.setName("SketchConstraintCoincidence_42")
-SketchPoint_6 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/Vertex-SketchPoint_2-SketchArc_5-SketchLine_31s"))
+SketchPoint_6 = Sketch_6.addPoint(model.selection("VERTEX", "Sketch_5/SketchPoint_2"))
SketchPoint_6.setName("SketchPoint_5")
SketchPoint_6.result().setName("SketchPoint_5")
-SketchLine_42 = Sketch_6.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_30"))
+SketchLine_42 = Sketch_6.addLine(model.selection("EDGE", "Sketch_5/SketchLine_30"))
SketchLine_42.setName("SketchLine_34")
SketchLine_42.result().setName("SketchLine_34")
-SketchLine_43 = Sketch_6.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_29"))
+SketchLine_43 = Sketch_6.addLine(model.selection("EDGE", "Sketch_5/SketchLine_29"))
SketchLine_43.setName("SketchLine_35")
SketchLine_43.result().setName("SketchLine_35")
SketchArc_20 = Sketch_6.addArc(0, 0, -20.32855135026245, 17, -20.32855135026245, -17, False)
SketchConstraintRadius_13 = Sketch_6.setRadius(SketchArc_20.results()[1], "r1*coeff")
SketchConstraintRadius_13.setName("SketchConstraintRadius_10")
model.do()
-Extrusion_6 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchLine_33r-SketchArc_6_2r-SketchLine_36r-SketchLine_37f")], model.selection(), "77*coeff-h_p*coeff", 0)
-Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_6_1/Generated_Face_3"))
+Extrusion_6 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchLine_36r-SketchArc_6_2r-SketchLine_37f-SketchLine_33r")], model.selection(), "77*coeff-h_p*coeff", 0)
+Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_6_1/Generated_Face&Sketch_6/SketchLine_33"))
SketchLine_46 = Sketch_7.addLine(37, -8.881784197001252e-16, -22, 1.665334536937735e-15)
SketchLine_46.setName("SketchLine_38")
SketchLine_46.result().setName("SketchLine_38")
SketchLine_46.setAuxiliary(True)
-SketchLine_47 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_6_1/Generated_Face_3&Extrusion_6_1/To_Face_1"))
+SketchLine_47 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_6_1/Generated_Face&Sketch_6/SketchLine_33][Extrusion_6_1/To_Face]"))
SketchLine_47.setName("SketchLine_39")
SketchLine_47.result().setName("SketchLine_39")
SketchConstraintCoincidence_69 = Sketch_7.setCoincident(SketchLine_46.startPoint(), SketchLine_47.result())
SketchConstraintCoincidence_69.setName("SketchConstraintCoincidence_50")
-SketchLine_48 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_5_1/Generated_Face_2&Extrusion_5_1/From_Face_1"))
+SketchLine_48 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_5_1/Generated_Face&Sketch_5/SketchLine_32][Extrusion_5_1/From_Face]"))
SketchLine_48.setName("SketchLine_40")
SketchLine_48.result().setName("SketchLine_40")
SketchConstraintCoincidence_70 = Sketch_7.setCoincident(SketchLine_46.endPoint(), SketchLine_48.result())
SketchConstraintRadius_14 = Sketch_7.setRadius(SketchCircle_11.results()[1], "r3")
SketchConstraintRadius_14.setName("SketchConstraintRadius_12")
model.do()
-ExtrusionCut_9 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchCircle_10_2f")], model.selection(), 0, "10*coeff", [model.selection("SOLID", "Extrusion_6_1")])
-ExtrusionCut_10 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchArc_7_2r-SketchArc_10_2f-SketchLine_44r-SketchArc_12_2r-SketchArc_13_2r-SketchLine_48r-SketchLine_43f-SketchArc_14_2f"), model.selection("FACE", "Sketch_1/Face-SketchCircle_11_2f"), model.selection("WIRE", "Sketch_1/Wire-SketchLine_50f-SketchArc_15_2f-SketchArc_16_2r-SketchLine_51r-SketchArc_17_2r-SketchLine_52f"), model.selection("FACE", "Sketch_1/Face-SketchLine_53f-SketchArc_18_2r-SketchLine_54f-SketchArc_19_2r-SketchArc_20_2f-SketchLine_55r-SketchArc_21_2f-SketchArc_22_2r"), model.selection("FACE", "Sketch_1/Face-SketchArc_8_2r-SketchArc_9_2f-SketchLine_42r-SketchLine_45f-SketchLine_46r-SketchArc_11_2r")], model.selection(), model.selection("FACE", "ExtrusionCut_3_2/Modfied_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_8_1_2")])
-Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_9_1/Modfied_2"))
+ExtrusionCut_9 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Face-SketchCircle_10_2f_wire")], model.selection(), 0, "10*coeff", [model.selection("SOLID", "Extrusion_6_1")])
+ExtrusionCut_10_objects_1 = [model.selection("WIRE", "Sketch_1/Face-SketchArc_10_2f-SketchLine_43f-SketchArc_14_2f-SketchArc_13_2r-SketchLine_48r-SketchArc_12_2r-SketchLine_44r-SketchArc_7_2r_wire"), model.selection("FACE", "Sketch_1/Face-SketchCircle_11_2f"), model.selection("WIRE", "Sketch_1/Face-SketchLine_50f-SketchLine_52f-SketchArc_17_2r-SketchLine_51r-SketchArc_16_2r-SketchArc_15_2f_wire"), model.selection("FACE", "Sketch_1/Face-SketchLine_53f-SketchArc_18_2r-SketchLine_54f-SketchArc_19_2r-SketchArc_20_2f-SketchLine_55r-SketchArc_21_2f-SketchArc_22_2r"), model.selection("FACE", "Sketch_1/Face-SketchLine_45f-SketchArc_11_2r-SketchLine_46r-SketchLine_42r-SketchArc_9_2f-SketchArc_8_2r")]
+ExtrusionCut_10 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_10_objects_1, model.selection(), model.selection("FACE", "ExtrusionCut_3_2/Modified_Face&Extrusion_1_1/To_Face"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_8_1_2")])
+Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_9_1/Modified_Face&Sketch_6/SketchLine_33"))
SketchLine_50 = Sketch_8.addLine(37, 14.80042035331162, 37, -14)
SketchLine_50.setName("SketchLine_56")
SketchLine_50.result().setName("SketchLine_56")
SketchLine_50.setAuxiliary(True)
-SketchLine_51 = Sketch_8.addLine(model.selection("EDGE", "ExtrusionCut_9_1/Modfied_2&Extrusion_6_1/To_Face_1"))
+SketchLine_51 = Sketch_8.addLine(model.selection("EDGE", "[ExtrusionCut_9_1/Modified_Face&Sketch_6/SketchLine_33][Extrusion_6_1/To_Face]"))
SketchLine_51.setName("SketchLine_57")
SketchLine_51.result().setName("SketchLine_57")
SketchConstraintCoincidence_73 = Sketch_8.setCoincident(SketchLine_50.startPoint(), SketchLine_51.result())
SketchConstraintCoincidence_73.setName("SketchConstraintCoincidence_81")
SketchConstraintCoincidence_74 = Sketch_8.setCoincident(SketchLine_50.endPoint(), SketchLine_51.result())
SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_82")
-SketchLine_52 = Sketch_8.addLine(model.selection("EDGE", "Extrusion_6_1/Generated_Face_4&ExtrusionCut_9_1/Modfied_2"))
+SketchLine_52 = Sketch_8.addLine(model.selection("EDGE", "[Extrusion_6_1/Generated_Face&Sketch_6/SketchLine_36][ExtrusionCut_9_1/Modified_Face&Sketch_6/SketchLine_33]"))
SketchLine_52.setName("SketchLine_58")
SketchLine_52.result().setName("SketchLine_58")
-SketchArc_21 = Sketch_8.addArc(34, -14, 37, -14, 34.00000001126211, -17, True)
+SketchArc_21 = Sketch_8.addArc(34, -14, 37, -14, 33.9999999583228, -17, True)
SketchArc_21.setName("SketchArc_23")
SketchArc_21.result().setName("SketchArc_23")
SketchArc_21.results()[1].setName("SketchArc_23_2")
SketchConstraintCoincidence_76 = Sketch_8.setCoincident(SketchLine_52.result(), SketchArc_21.endPoint())
SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_84")
SketchConstraintTangent_7 = Sketch_8.setTangent(SketchArc_21.results()[1], SketchLine_52.result())
-SketchLine_53 = Sketch_8.addLine(34.00000002238511, -17, 37, -17)
+SketchLine_53 = Sketch_8.addLine(34, -17, 37, -17)
SketchLine_53.setName("SketchLine_59")
SketchLine_53.result().setName("SketchLine_59")
SketchConstraintCoincidence_77 = Sketch_8.setCoincident(SketchArc_21.endPoint(), SketchLine_53.startPoint())
SketchConstraintCoincidence_80.setName("SketchConstraintCoincidence_88")
SketchConstraintRadius_15 = Sketch_8.setRadius(SketchArc_21.results()[1], "3*coeff")
SketchConstraintRadius_15.setName("SketchConstraintRadius_16")
-SketchLine_55 = Sketch_8.addLine(model.selection("EDGE", "Sketch_7/Edge-SketchLine_38"))
+SketchLine_55 = Sketch_8.addLine(model.selection("EDGE", "Sketch_7/SketchLine_38"))
SketchLine_55.setName("SketchLine_61")
SketchLine_55.result().setName("SketchLine_61")
SketchConstraintMirror_2_objects = [SketchArc_21.results()[1], SketchLine_54.result(), SketchLine_53.result()]
SketchArc_22.result().setName("SketchArc_24")
SketchArc_22.results()[1].setName("SketchArc_24_2")
model.do()
-ExtrusionCut_11 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchArc_23_2r-SketchLine_59f-SketchLine_60r"), model.selection("WIRE", "Sketch_8/Wire-SketchArc_24_2r-SketchLine_62f-SketchLine_63r")], model.selection(), 0, "100*coeff", [model.selection("SOLID", "ExtrusionCut_9_1")])
-Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_5_1/Generated_Face_3"))
+ExtrusionCut_11 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_59f-SketchLine_60r-SketchArc_23_2r"), model.selection("WIRE", "Sketch_8/Face-SketchLine_62f-SketchLine_63r-SketchArc_24_2r_wire")], model.selection(), 0, "100*coeff", [model.selection("SOLID", "ExtrusionCut_9_1")])
+Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_5_1/Generated_Face&Sketch_5/SketchLine_29"))
SketchLine_58 = Sketch_9.addLine(-32, -19, -32, -3.575047476349699)
SketchLine_58.setName("SketchLine_64")
SketchLine_58.result().setName("SketchLine_64")
SketchLine_58.setAuxiliary(True)
-SketchLine_59 = Sketch_9.addLine(model.selection("EDGE", "Extrusion_5_1/Generated_Face_3&Extrusion_5_1/Generated_Face_2"))
+SketchLine_59 = Sketch_9.addLine(model.selection("EDGE", "[Extrusion_5_1/Generated_Face&Sketch_5/SketchLine_32][Extrusion_5_1/Generated_Face&Sketch_5/SketchLine_29]"))
SketchLine_59.setName("SketchLine_65")
SketchLine_59.result().setName("SketchLine_65")
SketchConstraintCoincidence_81 = Sketch_9.setCoincident(SketchLine_58.startPoint(), SketchLine_59.result())
SketchConstraintCoincidence_81.setName("SketchConstraintCoincidence_89")
SketchConstraintCoincidence_82 = Sketch_9.setCoincident(SketchLine_58.endPoint(), SketchLine_59.result())
SketchConstraintCoincidence_82.setName("SketchConstraintCoincidence_90")
-SketchLine_60 = Sketch_9.addLine(model.selection("EDGE", "Extrusion_5_1/Generated_Face_3&Extrusion_5_1/From_Face_1"))
+SketchLine_60 = Sketch_9.addLine(model.selection("EDGE", "[Extrusion_5_1/Generated_Face&Sketch_5/SketchLine_29][Extrusion_5_1/From_Face]"))
SketchLine_60.setName("SketchLine_66")
SketchLine_60.result().setName("SketchLine_66")
SketchArc_23 = Sketch_9.addArc(-29, -19, -32, -19, -29.00002201340376, -22, False)
SketchConstraintRadius_16 = Sketch_9.setRadius(SketchArc_23.results()[1], "3*coeff")
SketchConstraintRadius_16.setName("SketchConstraintRadius_17")
model.do()
-ExtrusionCut_12 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchArc_25_2r-SketchLine_67f-SketchLine_68f")], model.selection(), 0, "100*coeff", [model.selection("SOLID", "Extrusion_5_1")])
+ExtrusionCut_12 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchLine_67f-SketchLine_68f-SketchArc_25_2r")], model.selection(), 0, "100*coeff", [model.selection("SOLID", "Extrusion_5_1")])
model.do()
from GeomAPI import GeomAPI_Shape
# checking for parametric update
Parameter_Epaisseur.setValue(33.9)
model.do()
-model.testResultsVolumes(Part_1, [118105.9369682])
+model.testResultsVolumes(Part_1, [118105.934450283])
Parameter_Epaisseur.setValue(34)
+model.do()
+model.testResultsVolumes(Part_1, [118190.673218984])
model.end()
assert(model.checkPythonDump())
