-# -*- coding: utf-8 -*-
-
-## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
+# Copyright (C) 2014-2023 CEA, EDF
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
from SketchAPI import *
SketchConstraintEqual_4 = Sketch_1.setEqual(SketchArc_1.results()[1], SketchArc_4.results()[1])
SketchConstraintEqual_5 = Sketch_1.setEqual(SketchLine_3.result(), SketchLine_5.result())
SketchConstraintEqual_6 = Sketch_1.setEqual(SketchLine_9.result(), SketchLine_11.result())
-SketchConstraintEqual_7 = Sketch_1.setEqual(SketchArc_6.results()[1], SketchArc_7.results()[1])
-SketchConstraintEqual_8 = Sketch_1.setEqual(SketchLine_7.result(), SketchLine_13.result())
+SketchConstraintEqual_7 = Sketch_1.setEqual(SketchLine_7.result(), SketchLine_13.result())
SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_7.result(), "epaisseur*coeff")
SketchConstraintDistance_1 = Sketch_1.setDistance(SketchArc_5.endPoint(), SketchLine_3.result(), "epaisseur*coeff")
SketchConstraintDistance_2 = Sketch_1.setDistance(SketchArc_6.endPoint(), SketchLine_4.result(), "epaisseur*coeff")
SketchConstraintDistance_6 = Sketch_1.setDistance(SketchLine_1.result(), SketchArc_6.endPoint(), "(h4-d_diff)*coeff")
SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_10.result(), "d1*coeff")
model.do()
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchArc_1_2f-SketchLine_3f-SketchArc_2_2r-SketchLine_4f-SketchArc_3_2r-SketchLine_5f-SketchArc_4_2f-SketchLine_6f-SketchLine_7r-SketchLine_8r-SketchArc_5_2r-SketchLine_9r-SketchArc_6_2f-SketchLine_10r-SketchArc_7_2f-SketchLine_11r-SketchArc_8_2r-SketchLine_12r-SketchLine_13r")], model.selection(), "epaisseur_plat*coeff", 0)
-Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_19"), "d2*coeff", True)
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchArc_1_2f-SketchLine_3f-SketchArc_2_2r-SketchLine_4f-SketchArc_3_2r-SketchLine_5f-SketchArc_4_2f-SketchLine_6f-SketchLine_13r-SketchLine_12r-SketchArc_8_2r-SketchLine_11r-SketchArc_7_2f-SketchLine_10r-SketchArc_6_2f-SketchLine_9r-SketchArc_5_2r-SketchLine_8r-SketchLine_7r_wire")], model.selection(), "epaisseur_plat*coeff", 0)
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_7"), "d2*coeff", True)
Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
-SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_14&Extrusion_1_1/Generated_Face_13"))
+SketchProjection_1 = Sketch_2.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_7_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_10]"), False)
SketchLine_14 = SketchProjection_1.createdFeature()
-SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_12&Extrusion_1_1/To_Face_1"))
+SketchProjection_2 = Sketch_2.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_11][Extrusion_1_1/To_Face]"), False)
SketchLine_15 = SketchProjection_2.createdFeature()
SketchLine_16 = Sketch_2.addLine(-24.99999999999999, -35.00000000000001, -31.24999999999999, -35.00000000000001)
SketchConstraintCoincidence_25 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_14).endPoint(), SketchLine_16.startPoint())
SketchConstraintTangent_20 = Sketch_2.setTangent(SketchLine_21.result(), SketchArc_12.results()[1])
SketchLine_22 = Sketch_2.addLine(-31.25, -32.50000000000001, -25.00000000000001, -32.50000000000001)
SketchConstraintCoincidence_35 = Sketch_2.setCoincident(SketchArc_12.endPoint(), SketchLine_22.startPoint())
-#SketchConstraintCoincidence_36 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_15).startPoint(), SketchLine_22.endPoint())
SketchLine_23 = Sketch_2.addLine(-24.99999999999999, -35.00000000000001, -24.99999999999999, -32.50000000000002)
-SketchConstraintCoincidence_37 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_14).endPoint(), SketchLine_23.startPoint())
-#SketchConstraintCoincidence_38 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_15).startPoint(), SketchLine_23.endPoint())
-SketchConstraintCoincidence_38 = Sketch_2.setCoincident(SketchLine_22.endPoint(), SketchLine_23.endPoint())
+SketchConstraintCoincidence_36 = Sketch_2.setCoincident(SketchAPI_Line(SketchLine_14).endPoint(), SketchLine_23.startPoint())
+SketchConstraintCoincidence_37 = Sketch_2.setCoincident(SketchLine_22.endPoint(), SketchLine_23.endPoint())
SketchConstraintHorizontal_5 = Sketch_2.setHorizontal(SketchLine_16.result())
SketchConstraintHorizontal_6 = Sketch_2.setHorizontal(SketchLine_22.result())
SketchConstraintHorizontal_7 = Sketch_2.setHorizontal(SketchLine_20.result())
SketchConstraintDistance_10 = Sketch_2.setDistance(SketchArc_11.startPoint(), SketchLine_18.result(), "epaisseur*coeff")
SketchConstraintCoincidence_39 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchAPI_Line(SketchLine_14).endPoint())
SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "PartSet/Origin"))
-#SketchConstraintDistance_11 = Sketch_2.setDistance(SketchLine_16.result(), SketchPoint_2.coordinates(), "(h4-d_diff)*coeff")
-SketchConstraintDistance_12 = Sketch_2.setDistance(SketchPoint_2.coordinates(), SketchLine_17.result(), "e3*coeff")
-#SketchConstraintCoincidence_40 = Sketch_2.setCoincident(SketchLine_16.startPoint(), SketchLine_15.result())
+SketchConstraintDistance_11 = Sketch_2.setDistance(SketchPoint_2.coordinates(), SketchLine_17.result(), "e3*coeff", False)
SketchConstraintRadius_3 = Sketch_2.setRadius(SketchArc_9.results()[1], "r2*coeff")
SketchConstraintEqual_9 = Sketch_2.setEqual(SketchArc_9.results()[1], SketchArc_10.results()[1])
SketchConstraintEqual_10 = Sketch_2.setEqual(SketchArc_11.results()[1], SketchArc_12.results()[1])
SketchConstraintRadius_4 = Sketch_2.setRadius(SketchArc_12.results()[1], "r3*coeff")
SketchConstraintDistance_13 = Sketch_2.setDistance(SketchArc_10.startPoint(), SketchLine_19.result(), "d8*coeff")
-#SketchConstraintDistance_14 = Sketch_2.setDistance(SketchLine_17.startPoint(), SketchLine_23.result(), "(e3-epaisseur_plat)*coeff")
model.do()
-Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_16r-SketchArc_9_2f-SketchLine_17r-SketchArc_10_2f-SketchLine_18r-SketchLine_19r-SketchLine_20r-SketchArc_11_2r-SketchLine_21r-SketchArc_12_2r-SketchLine_22r-SketchLine_23f")], model.selection(), "d6*coeff", 0)
-Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/Generated_Face_9"))
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_23f-SketchLine_22r-SketchArc_12_2r-SketchLine_21r-SketchArc_11_2r-SketchLine_20r-SketchLine_19r-SketchLine_18r-SketchArc_10_2f-SketchLine_17r-SketchArc_9_2f-SketchLine_16r_wire")], model.selection(), "d6*coeff", 0)
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_17"))
SketchLine_24 = Sketch_3.addLine(46.25, 22.91561885925604, 51.3, 20.00000000000001)
-SketchLine_25 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_9&Extrusion_2_1/To_Face_1"))
-#SketchConstraintCoincidence_41 = Sketch_3.setCoincident(SketchLine_24.startPoint(), SketchLine_25.result())
+SketchLine_25 = Sketch_3.addLine(model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_17][Extrusion_2_1/To_Face]"))
SketchLine_26 = Sketch_3.addLine(51.3, 20.00000000000001, 62.50000000000001, 20.00000000000001)
SketchConstraintCoincidence_42 = Sketch_3.setCoincident(SketchLine_24.endPoint(), SketchLine_26.startPoint())
SketchLine_27 = Sketch_3.addLine(62.50000000000001, 20.00000000000001, 62.5, -4.999999999999999)
SketchConstraintVertical_13 = Sketch_3.setVertical(SketchLine_33.result())
SketchConstraintVertical_14 = Sketch_3.setVertical(SketchLine_31.result())
SketchConstraintAngle_1 = Sketch_3.setAngleComplementary(SketchLine_26.result(), SketchLine_24.result(), "angle")
-SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "Extrusion_2_1/Generated_Face_8&Extrusion_2_1/Generated_Face_7"))
+SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_18][Extrusion_2_1/Generated_Face&Sketch_2/SketchArc_10_2]"), False)
SketchLine_34 = SketchProjection_3.createdFeature()
-SketchProjection_4 = Sketch_3.addProjection(model.selection("EDGE", "Extrusion_2_1/Generated_Face_11&Extrusion_2_1/Generated_Face_10"))
+SketchProjection_4 = Sketch_3.addProjection(model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_2/SketchArc_9_2][Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_16]"), False)
SketchLine_35 = SketchProjection_4.createdFeature()
SketchConstraintCoincidence_51 = Sketch_3.setCoincident(SketchLine_28.endPoint(), SketchLine_34.result())
SketchConstraintDistance_15 = Sketch_3.setDistance(SketchLine_31.result(), SketchLine_33.endPoint(), "(d6-d5)*coeff")
SketchConstraintDistance_17 = Sketch_3.setDistance(SketchLine_26.result(), SketchAPI_Line(SketchLine_35).startPoint(), "h2*coeff")
SketchConstraintLength_4 = Sketch_3.setLength(SketchLine_26.result(), "d7*coeff")
model.do()
-ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_24r-SketchLine_26r-SketchLine_27r-SketchLine_28r-SketchLine_29r")], model.selection(), model.selection("FACE", "Extrusion_2_1/Generated_Face_6"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_2_1")])
-ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
-ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_30r-SketchLine_31r-SketchLine_32r-SketchLine_33r")], model.selection(), model.selection("FACE", "Extrusion_1_1/To_Face_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
-ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
-Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_19"), "d3*coeff", True)
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_29r-SketchLine_28r-SketchLine_27r-SketchLine_26r-SketchLine_24r")], model.selection(), model.selection("FACE", "Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_19"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_2_1")])
+ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_33r-SketchLine_32r-SketchLine_31r-SketchLine_30r")], model.selection(), model.selection("FACE", "Extrusion_1_1/To_Face"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
+Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_7"), "d3*coeff", True)
Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2"))
-SketchProjection_5 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_16&Extrusion_1_1/To_Face_1"))
+SketchProjection_5 = Sketch_4.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_9][Extrusion_1_1/To_Face]"), False)
SketchLine_36 = SketchProjection_5.createdFeature()
-SketchProjection_6 = Sketch_4.addProjection(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_8&ExtrusionCut_2_1/Modfied_9"))
+SketchProjection_6 = Sketch_4.addProjection(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Sketch_2/SketchLine_23][ExtrusionCut_2_1/Generated_Face&Sketch_3/SketchLine_31]"), False)
SketchLine_37 = SketchProjection_6.createdFeature()
-SketchProjection_7 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_15&Extrusion_1_1/Generated_Face_14"))
+SketchProjection_7 = Sketch_4.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_10][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_6_2]"), False)
SketchLine_38 = SketchProjection_7.createdFeature()
SketchLine_39 = Sketch_4.addLine(-25, -35.00000000000001, -31.24999999999999, -35.00000000000001)
SketchConstraintCoincidence_55 = Sketch_4.setCoincident(SketchAPI_Line(SketchLine_37).startPoint(), SketchLine_39.startPoint())
SketchConstraintDistance_19 = Sketch_4.setDistance(SketchLine_41.endPoint(), SketchLine_40.result(), "epaisseur*coeff")
SketchConstraintDistance_20 = Sketch_4.setDistance(SketchLine_41.startPoint(), SketchLine_39.result(), "h2")
model.do()
-Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchLine_39r-SketchArc_13_2f-SketchLine_40r-SketchLine_41r-SketchLine_42r-SketchArc_14_2r-SketchLine_43r-SketchLine_44f")], model.selection(), 0, "e1*coeff")
-Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_6"))
+Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Face-SketchLine_44f-SketchLine_43r-SketchArc_14_2r-SketchLine_42r-SketchLine_41r-SketchLine_40r-SketchArc_13_2f-SketchLine_39r_wire")], model.selection(), 0, "e1*coeff")
+Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Sketch_2/SketchLine_18"))
SketchCircle_1 = Sketch_5.addCircle(70, 17.5, 3.125)
-SketchLine_45 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_6&ExtrusionCut_1_1/Modfied_5"))
+SketchLine_45 = Sketch_5.addLine(model.selection("EDGE", "[ExtrusionCut_1_1/Modified_Face&Sketch_2/SketchLine_19][ExtrusionCut_1_1/Modified_Face&Sketch_2/SketchLine_18]"))
SketchConstraintDistance_21 = Sketch_5.setDistance(SketchCircle_1.center(), SketchLine_45.result(), "d9*coeff")
-SketchProjection_8 = Sketch_5.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_8"))
+SketchProjection_8 = Sketch_5.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_13]"))
SketchLine_46 = SketchProjection_8.createdFeature()
-SketchProjection_9 = Sketch_5.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_20&Extrusion_1_1/Generated_Face_19"))
+SketchProjection_9 = Sketch_5.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_7]"), False)
SketchLine_47 = SketchProjection_9.createdFeature()
SketchConstraintDistance_22 = Sketch_5.setDistance(SketchCircle_1.center(), SketchLine_47.result(), "d1*coeff")
SketchConstraintRadius_7 = Sketch_5.setRadius(SketchCircle_1.results()[1], "r_trou")
model.do()
-ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchCircle_1_2f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
-ExtrusionCut_3.result().setName("ExtrusionCut_3_1")
-Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_14"))
+ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchCircle_1_2r")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Sketch_2/SketchLine_20"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
+Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_10"))
SketchCircle_2 = Sketch_6.addCircle(70, -17.5, 5)
-SketchLine_48 = Sketch_6.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_14&Extrusion_1_1/To_Face_1"))
-SketchProjection_10 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_19&Extrusion_1_1/Generated_Face_18"))
+SketchLine_48 = Sketch_6.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_10][Extrusion_1_1/To_Face]"))
+SketchProjection_10 = Sketch_6.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_8][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_7]"), False)
SketchLine_49 = SketchProjection_10.createdFeature()
SketchConstraintDistance_23 = Sketch_6.setDistance(SketchCircle_2.center(), SketchLine_49.result(), "d1*coeff")
SketchConstraintDistance_23.setName("SketchConstraintDistance_24")
SketchConstraintRadius_8 = Sketch_6.setRadius(SketchCircle_2.results()[1], "r_trou2")
-SketchLine_50 = Sketch_6.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_10"))
+SketchLine_50 = Sketch_6.addLine(model.selection("EDGE", "Sketch_1/SketchLine_10"))
SketchConstraintDistance_24 = Sketch_6.setDistance(SketchCircle_2.center(), SketchLine_50.result(), "d_trou")
SketchConstraintDistance_24.setName("SketchConstraintDistance_25")
model.do()
-ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchCircle_2_2f")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")])
-ExtrusionCut_4.result().setName("ExtrusionCut_4_1")
-Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_8"))
+ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchCircle_2_2r")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")])
+Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6"))
SketchLine_51 = Sketch_7.addLine(110, 21.46600893000899, 110, 7.22841614740048)
SketchLine_51.setAuxiliary(True)
-SketchLine_52 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_8"))
+SketchLine_52 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_13]"))
SketchConstraintCoincidence_65 = Sketch_7.setCoincident(SketchLine_51.startPoint(), SketchLine_52.result())
SketchConstraintCoincidence_66 = Sketch_7.setCoincident(SketchLine_51.endPoint(), SketchLine_52.result())
-SketchLine_53 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/From_Face_1&Extrusion_1_1/Generated_Face_8"))
+SketchLine_53 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_1_1/From_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6]"))
SketchArc_15 = Sketch_7.addArc(102.5, 7.22841614740048, 110, 7.22841614740048, 104.5, 0, True)
SketchConstraintCoincidence_67 = Sketch_7.setCoincident(SketchLine_51.endPoint(), SketchArc_15.startPoint())
SketchConstraintTangent_29 = Sketch_7.setTangent(SketchLine_51.result(), SketchArc_15.results()[1])
SketchLine_56 = Sketch_7.addLine(110, 12.5, 0, 12.5)
SketchLine_56.setAuxiliary(True)
SketchConstraintCoincidence_73 = Sketch_7.setCoincident(SketchLine_56.startPoint(), SketchLine_52.result())
-SketchLine_57 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_20&Extrusion_1_1/Generated_Face_19"))
+SketchLine_57 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_7]"))
SketchConstraintCoincidence_74 = Sketch_7.setCoincident(SketchLine_56.endPoint(), SketchLine_57.result())
SketchConstraintMiddle_1 = Sketch_7.setMiddlePoint(SketchLine_56.endPoint(), SketchLine_57.result())
SketchConstraintMiddle_2 = Sketch_7.setMiddlePoint(SketchLine_56.startPoint(), SketchLine_52.result())
-SketchProjection_11 = Sketch_7.addProjection(model.selection("EDGE", "Extrusion_1_1/To_Face_1&ExtrusionCut_4_1/Modfied_1"))
+SketchProjection_11 = Sketch_7.addProjection(model.selection("EDGE", "[Extrusion_1_1/To_Face][ExtrusionCut_4_1/Modified_Face&Sketch_1/SketchLine_4]"), False)
SketchLine_58 = SketchProjection_11.createdFeature()
SketchLine_59 = Sketch_7.addLine(55.00000000000002, 0, 55.00000000000002, 25)
SketchLine_59.setAuxiliary(True)
SketchConstraintMirror_2 = Sketch_7.addMirror(SketchLine_59.result(), SketchConstraintMirror_2_objects)
[SketchArc_17, SketchLine_63, SketchLine_64, SketchArc_18, SketchLine_65, SketchLine_66] = SketchConstraintMirror_2.mirrored()
model.do()
-ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchArc_16_2r-SketchLine_61f-SketchLine_62r"), model.selection("FACE", "Sketch_7/Face-SketchArc_18_2r-SketchLine_65f-SketchLine_66r"), model.selection("FACE", "Sketch_7/Face-SketchArc_17_2r-SketchLine_64r-SketchLine_66r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_15_2r-SketchLine_54f-SketchLine_55r")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_10"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_4_1")])
-ExtrusionCut_5.result().setName("ExtrusionCut_5_1")
+ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Face-SketchLine_61f-SketchLine_62r-SketchArc_16_2r_wire"), model.selection("FACE", "Sketch_7/Face-SketchLine_65f-SketchLine_66r-SketchArc_18_2r"), model.selection("FACE", "Sketch_7/Face-SketchLine_63f-SketchLine_64r-SketchArc_17_2r"), model.selection("WIRE", "Sketch_7/Face-SketchLine_54f-SketchLine_55r-SketchArc_15_2r_wire")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_12"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_4_1")])
Boolean_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "ExtrusionCut_5_1")], [model.selection("SOLID", "Extrusion_3_1"), model.selection("SOLID", "ExtrusionCut_3_1")])
-Boolean_1.result().setName("Boolean_1_1")
model.do()
from GeomAPI import GeomAPI_Shape
