-# -*- coding: utf-8 -*-
-
-## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
+# Copyright (C) 2014-2020 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
from salome.shaper import model
SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_5.result(), 32)
SketchConstraintTangent_8 = Sketch_1.setTangent(SketchArc_4.results()[1], SketchLine_6.result())
model.do()
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_3f-SketchLine_5r-SketchLine_6r-SketchArc_1_2f-SketchArc_2_2f-SketchArc_3_2f-SketchArc_4_2f")], model.selection(), 76, 0)
-Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face_1"))
-SketchLine_7 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1"))
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_3_2f-SketchLine_3f-SketchArc_4_2f-SketchLine_6r-SketchArc_2_2f-SketchLine_5r-SketchArc_1_2f-SketchLine_1r")], model.selection(), 76, 0)
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
+SketchLine_7 = Sketch_2.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/To_Face]"))
SketchLine_7.setName("SketchLine_8")
SketchLine_7.result().setName("SketchLine_8")
SketchLine_8 = Sketch_2.addLine(21, 45.99999999998655, 20.99999999998684, 0)
SketchLine_8.setName("SketchLine_9")
SketchLine_8.result().setName("SketchLine_9")
SketchLine_8.setAuxiliary(True)
-SketchLine_9 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1"))
+SketchLine_9 = Sketch_2.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/To_Face]"))
SketchLine_9.setName("SketchLine_10")
SketchLine_9.result().setName("SketchLine_10")
SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchLine_9.result())
SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18")
-SketchLine_10 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/To_Face_1"))
+SketchLine_10 = Sketch_2.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/To_Face]"))
SketchLine_10.setName("SketchLine_11")
SketchLine_10.result().setName("SketchLine_11")
SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_10.result())
SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_19")
SketchConstraintMiddle_1 = Sketch_2.setMiddlePoint(SketchLine_8.startPoint(), SketchLine_9.result())
SketchConstraintMiddle_2 = Sketch_2.setMiddlePoint(SketchLine_8.endPoint(), SketchLine_10.result())
-SketchLine_11 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/To_Face_1"))
+SketchLine_11 = Sketch_2.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/To_Face]"))
SketchLine_11.setName("SketchLine_12")
SketchLine_11.result().setName("SketchLine_12")
SketchPoint_1 = Sketch_2.addPoint(20.99999999999342, 22.99999999999327)
SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_2.results()[1], 2.5)
SketchConstraintDistance_3 = Sketch_2.setDistance(SketchLine_12.result(), SketchCircle_4.center(), 8)
model.do()
-ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchCircle_2_2r"), model.selection("WIRE", "Sketch_2/Wire-SketchCircle_3_2f")], model.selection(), 0, 15, [model.selection("SOLID", "Extrusion_1_1")])
-ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
-ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_4_2f")], model.selection(), model.selection("FACE", "Extrusion_1_1/From_Face_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
-ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchCircle_1_2f-SketchCircle_2_2r-SketchCircle_3_2r-SketchCircle_4_2r_wire"), model.selection("WIRE", "Sketch_2/Face-SketchCircle_1_2f-SketchCircle_2_2r-SketchCircle_3_2r-SketchCircle_4_2r_wire_2"), model.selection("WIRE", "Sketch_2/Face-SketchCircle_3_2f_wire")], model.selection(), 0, 15, [model.selection("SOLID", "Extrusion_1_1")])
+ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_4_2f")], model.selection(), model.selection("FACE", "Extrusion_1_1/From_Face"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
SketchCircle_5 = Sketch_3.addCircle(20.99999999999342, 22.99999999999327, 19)
SketchConstraintRadius_4 = Sketch_3.setRadius(SketchCircle_5.results()[1], 19)
SketchLine_13.setName("SketchLine_14")
SketchLine_13.result().setName("SketchLine_14")
SketchLine_13.setAuxiliary(True)
-SketchLine_14 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&Extrusion_1_1/Generated_Face_5"))
+SketchLine_14 = Sketch_3.addLine(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/From_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6]"))
SketchLine_14.setName("SketchLine_15")
SketchLine_14.result().setName("SketchLine_15")
SketchConstraintCoincidence_26 = Sketch_3.setCoincident(SketchLine_13.startPoint(), SketchLine_14.result())
SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_27")
-SketchLine_15 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_2_1/Modfied_2"))
+SketchLine_15 = Sketch_3.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/From_Face]"))
SketchLine_15.setName("SketchLine_16")
SketchLine_15.result().setName("SketchLine_16")
SketchConstraintCoincidence_27 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_15.result())
SketchLine_16.setName("SketchLine_17")
SketchLine_16.result().setName("SketchLine_17")
SketchLine_16.setAuxiliary(True)
-SketchLine_17 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&Extrusion_1_1/Generated_Face_3"))
+SketchLine_17 = Sketch_3.addLine(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/From_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5]"))
SketchLine_17.setName("SketchLine_18")
SketchLine_17.result().setName("SketchLine_18")
SketchConstraintCoincidence_28 = Sketch_3.setCoincident(SketchLine_16.startPoint(), SketchLine_17.result())
SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_29")
-SketchLine_18 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_3"))
+SketchLine_18 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/SketchLine_3"))
SketchLine_18.setName("SketchLine_19")
SketchLine_18.result().setName("SketchLine_19")
SketchConstraintCoincidence_29 = Sketch_3.setCoincident(SketchLine_16.endPoint(), SketchLine_18.result())
SketchConstraintDistance_4 = Sketch_3.setDistance(SketchCircle_6.center(), SketchCircle_7.center(), 16)
SketchConstraintDistance_5 = Sketch_3.setDistance(SketchCircle_6.center(), SketchLine_16.result(), 8)
model.do()
-ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_5_2f-SketchCircle_6_2r-SketchCircle_7_2r")], model.selection(), 15, 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
+ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_5_2r-SketchCircle_7_2r-SketchCircle_6_2r")], model.selection(), 15, 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
ExtrusionCut_3.result().setName("ExtrusionCut_3_1")
-Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3"))
-SketchProjection_1 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/Generated_Face_2"))
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5"))
+SketchProjection_1 = Sketch_4.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_1_2]"), False)
SketchLine_19 = SketchProjection_1.createdFeature()
SketchLine_19.setName("SketchLine_20")
SketchLine_19.result().setName("SketchLine_20")
-SketchProjection_2 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_4"))
+SketchProjection_2 = Sketch_4.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_2_2]"), False)
SketchLine_20 = SketchProjection_2.createdFeature()
SketchLine_20.setName("SketchLine_21")
SketchLine_20.result().setName("SketchLine_21")
SketchLine_21 = Sketch_4.addLine(4.999999999999999, -28, 37, -28)
SketchLine_21.setName("SketchLine_22")
SketchLine_21.result().setName("SketchLine_22")
-SketchLine_22 = Sketch_4.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_3"))
+SketchLine_22 = Sketch_4.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5]"))
SketchLine_22.setName("SketchLine_23")
SketchLine_22.result().setName("SketchLine_23")
SketchConstraintCoincidence_34 = Sketch_4.setCoincident(SketchLine_21.startPoint(), SketchLine_22.result())
SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_35")
-SketchLine_23 = Sketch_4.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_4"))
+SketchLine_23 = Sketch_4.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_2_2]"))
SketchLine_23.setName("SketchLine_24")
SketchLine_23.result().setName("SketchLine_24")
SketchConstraintCoincidence_35 = Sketch_4.setCoincident(SketchLine_21.endPoint(), SketchLine_23.result())
SketchLine_25.result().setName("SketchLine_26")
SketchConstraintCoincidence_38 = Sketch_4.setCoincident(SketchLine_25.startPoint(), SketchLine_19.result())
SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_39")
-SketchConstraintCoincidence_39 = Sketch_4.setCoincident(SketchLine_25.endPoint(), SketchLine_19.result())
-SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_40")
SketchLine_26 = Sketch_4.addLine(42, -33, 42, -43)
SketchLine_26.setName("SketchLine_27")
SketchLine_26.result().setName("SketchLine_27")
SketchLine_27.setName("SketchLine_28")
SketchLine_27.result().setName("SketchLine_28")
SketchLine_27.setAuxiliary(True)
-SketchConstraintCoincidence_50 = Sketch_4.setCoincident(SketchLine_27.startPoint(), SketchLine_19.result())
-SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_51")
SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchLine_27.endPoint(), SketchLine_20.result())
SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_52")
SketchConstraintMiddle_10 = Sketch_4.setMiddlePoint(SketchLine_27.endPoint(), SketchLine_20.result())
SketchConstraintMiddle_11 = Sketch_4.setMiddlePoint(SketchLine_27.startPoint(), SketchLine_19.result())
SketchConstraintMiddle_12 = Sketch_4.setMiddlePoint(SketchLine_25.result(), SketchLine_27.startPoint())
model.do()
-Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchLine_22r-SketchLine_25f-SketchLine_26f-SketchLine_27r-SketchArc_5_2f-SketchArc_6_2f-SketchArc_7_2f-SketchArc_8_2f")], model.selection(), 2, 17)
-Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/To_Face_1"))
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchArc_5_2f-SketchLine_26f-SketchArc_6_2f-SketchLine_25f-SketchArc_8_2f-SketchLine_27r-SketchArc_7_2f-SketchLine_22r")], model.selection(), 2, 17)
+Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/To_Face"))
SketchLine_28 = Sketch_5.addLine(5.000000000000001, -46, 37.00000000000001, -46)
SketchLine_28.setName("SketchLine_29")
SketchLine_28.result().setName("SketchLine_29")
SketchConstraintVertical_3 = Sketch_5.setVertical(SketchLine_31.result())
SketchConstraintEqual_8 = Sketch_5.setEqual(SketchLine_29.result(), SketchLine_28.result())
SketchConstraintEqual_9 = Sketch_5.setEqual(SketchLine_31.result(), SketchLine_30.result())
-SketchLine_32 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_1"))
+SketchLine_32 = Sketch_5.addLine(model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_4/SketchLine_26][Extrusion_2_1/To_Face]"))
SketchLine_32.setName("SketchLine_33")
SketchLine_32.result().setName("SketchLine_33")
SketchConstraintDistance_7 = Sketch_5.setDistance(SketchLine_30.endPoint(), SketchLine_32.result(), 2)
-SketchLine_33 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_3&Extrusion_2_1/To_Face_1"))
+SketchLine_33 = Sketch_5.addLine(model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_4/SketchLine_27][Extrusion_2_1/To_Face]"))
SketchLine_33.setName("SketchLine_34")
SketchLine_33.result().setName("SketchLine_34")
SketchConstraintDistance_8 = Sketch_5.setDistance(SketchLine_31.startPoint(), SketchLine_33.result(), 2)
-SketchLine_34 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_1&Extrusion_2_1/To_Face_1"))
+SketchLine_34 = Sketch_5.addLine(model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_4/SketchLine_22][Extrusion_2_1/To_Face]"))
SketchLine_34.setName("SketchLine_35")
SketchLine_34.result().setName("SketchLine_35")
SketchConstraintDistance_9 = Sketch_5.setDistance(SketchLine_29.startPoint(), SketchLine_34.result(), 2)
-SketchLine_35 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/To_Face_1"))
+SketchLine_35 = Sketch_5.addLine(model.selection("EDGE", "[Extrusion_2_1/Generated_Face&Sketch_4/SketchLine_25][Extrusion_2_1/To_Face]"))
SketchLine_35.setName("SketchLine_36")
SketchLine_35.result().setName("SketchLine_36")
SketchConstraintDistance_10 = Sketch_5.setDistance(SketchLine_28.startPoint(), SketchLine_35.result(), 2)
SketchConstraintMiddle_16 = Sketch_5.setMiddlePoint(SketchLine_37.endPoint(), SketchLine_35.result())
SketchConstraintDistance_12 = Sketch_5.setDistance(SketchCircle_8.center(), SketchLine_37.result(), 8)
model.do()
-ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_5/Wire-SketchLine_29f-SketchLine_30r-SketchLine_31r-SketchLine_32r-SketchArc_9_2f-SketchArc_10_2f-SketchArc_11_2f-SketchArc_12_2f")], model.selection(), 0, 15, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "ExtrusionCut_3_1")])
-ExtrusionCut_4.result().setName("ExtrusionCut_4_1")
-ExtrusionCut_4.results()[1].setName("ExtrusionCut_4_2")
+ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_5/Face-SketchLine_29r-SketchArc_12_2f-SketchLine_32r-SketchArc_11_2f-SketchLine_30r-SketchArc_9_2f-SketchLine_31r-SketchArc_10_2f-SketchCircle_9_2r-SketchCircle_8_2r_wire")], model.selection(), 0, 15, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "ExtrusionCut_3_1")])
ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchCircle_8_2f"), model.selection("FACE", "Sketch_5/Face-SketchCircle_9_2f")], model.selection(), 0, 20, [model.selection("SOLID", "ExtrusionCut_4_1"), model.selection("SOLID", "ExtrusionCut_4_2")])
-ExtrusionCut_5.result().setName("ExtrusionCut_5_1")
-ExtrusionCut_5.results()[1].setName("ExtrusionCut_5_2")
Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/YOZ"))
SketchLine_38 = Sketch_6.addLine(-59, 44, -59, 2)
SketchLine_38.setName("SketchLine_39")
SketchConstraintLength_4 = Sketch_6.setLength(SketchLine_43.result(), 20)
SketchConstraintLength_5 = Sketch_6.setLength(SketchLine_44.result(), 15)
SketchConstraintLength_6 = Sketch_6.setLength(SketchLine_39.result(), 42)
-SketchProjection_3 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"))
+SketchProjection_3 = Sketch_6.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_4_2]"), False)
SketchLine_46 = SketchProjection_3.createdFeature()
SketchLine_46.setName("SketchLine_47")
SketchLine_46.result().setName("SketchLine_47")
-SketchProjection_4 = Sketch_6.addProjection(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_3&Extrusion_1_1/Generated_Face_5"))
+SketchProjection_4 = Sketch_6.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_3_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_1_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_4_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_2_2)(ExtrusionCut_1_1/Generated_Face&Sketch_2/SketchCircle_1_2)_ExtrusionCut_5_2]"), False)
SketchLine_47 = SketchProjection_4.createdFeature()
SketchLine_47.setName("SketchLine_48")
SketchLine_47.result().setName("SketchLine_48")
-SketchProjection_5 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"))
+SketchProjection_5 = Sketch_6.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_4_2]"), False)
SketchLine_48 = SketchProjection_5.createdFeature()
SketchLine_48.setName("SketchLine_49")
SketchLine_48.result().setName("SketchLine_49")
SketchConstraintDistance_13 = Sketch_6.setDistance(SketchLine_38.endPoint(), SketchLine_46.result(), 2)
SketchConstraintDistance_14 = Sketch_6.setDistance(SketchLine_38.startPoint(), SketchLine_47.result(), 17)
model.do()
-ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_5"), -2, model.selection(), -2, [model.selection("SOLID", "ExtrusionCut_5_2")])
-ExtrusionCut_6.result().setName("ExtrusionCut_6_1")
-Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_1"))
+ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6"), -2, model.selection(), -2, [model.selection("SOLID", "ExtrusionCut_5_2")])
+Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1"))
SketchLine_49 = Sketch_7.addLine(0, -22.99999999998656, -76, -22.99999999998655)
SketchLine_49.setName("SketchLine_50")
SketchLine_49.result().setName("SketchLine_50")
SketchLine_49.setAuxiliary(True)
-SketchLine_50 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_3_1/Modfied_4"))
+SketchLine_50 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_3_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_1_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_4_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_2_2)(ExtrusionCut_3_1/Generated_Face&Sketch_3/SketchCircle_5_2)_ExtrusionCut_6_1]"))
SketchLine_50.setName("SketchLine_51")
SketchLine_50.result().setName("SketchLine_51")
SketchConstraintCoincidence_74 = Sketch_7.setCoincident(SketchLine_49.startPoint(), SketchLine_50.result())
SketchConstraintCoincidence_74.setName("SketchConstraintCoincidence_75")
-SketchPoint_3 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_2/Vertex-SketchLine_13s"))
+SketchPoint_3 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_2/SketchLine_13_StartVertex"))
SketchConstraintCoincidence_75 = Sketch_7.setCoincident(SketchLine_49.endPoint(), SketchPoint_3.result())
SketchConstraintCoincidence_75.setName("SketchConstraintCoincidence_76")
SketchConstraintMiddle_17 = Sketch_7.setMiddlePoint(SketchLine_49.startPoint(), SketchLine_50.result())
SketchLine_51.setName("SketchLine_52")
SketchLine_51.result().setName("SketchLine_52")
SketchLine_51.setAuxiliary(True)
-SketchLine_52 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_4_2/Modfied_4"))
+SketchLine_52 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_1_2]"))
SketchLine_52.setName("SketchLine_53")
SketchLine_52.result().setName("SketchLine_53")
SketchConstraintCoincidence_76 = Sketch_7.setCoincident(SketchLine_51.startPoint(), SketchLine_52.result())
SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_77")
-SketchLine_53 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_1"))
+SketchLine_53 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_3_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1]"))
SketchLine_53.setName("SketchLine_54")
SketchLine_53.result().setName("SketchLine_54")
SketchConstraintCoincidence_77 = Sketch_7.setCoincident(SketchLine_51.endPoint(), SketchLine_53.result())
SketchConstraintCoincidence_79.setName("SketchConstraintCoincidence_80")
SketchConstraintRadius_8 = Sketch_7.setRadius(SketchCircle_10.results()[1], 17)
model.do()
-Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchCircle_10_2f")], model.selection(), 16, 0)
-Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_3_1/To_Face_1"))
-SketchProjection_6 = Sketch_8.addProjection(model.selection("EDGE", "Sketch_2/Edge-SketchLine_9"))
+Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_7/Face-SketchCircle_10_2f_wire")], model.selection(), 16, 0)
+Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_3_1/To_Face"))
+SketchProjection_6 = Sketch_8.addProjection(model.selection("EDGE", "Sketch_2/SketchLine_9"), False)
SketchLine_54 = SketchProjection_6.createdFeature()
SketchLine_54.setName("SketchLine_55")
SketchLine_54.result().setName("SketchLine_55")
-SketchProjection_7 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_3_1/Modfied_4"))
+SketchProjection_7 = Sketch_8.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_3_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_1_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_4_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_2_2)(ExtrusionCut_3_1/Generated_Face&Sketch_3/SketchCircle_5_2)_ExtrusionCut_6_1]"), False)
SketchLine_55 = SketchProjection_7.createdFeature()
SketchLine_55.setName("SketchLine_56")
SketchLine_55.result().setName("SketchLine_56")
SketchConstraintCoincidence_83 = Sketch_8.setCoincident(SketchLine_57.result(), SketchPoint_5.coordinates())
SketchConstraintCoincidence_83.setName("SketchConstraintCoincidence_84")
SketchConstraintPerpendicular_1 = Sketch_8.setPerpendicular(SketchLine_57.result(), SketchLine_56.result())
-SketchProjection_8 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_4_2/Modfied_4"))
+SketchProjection_8 = Sketch_8.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1][ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_1_2]"), False)
SketchLine_58 = SketchProjection_8.createdFeature()
SketchLine_58.setName("SketchLine_59")
SketchLine_58.result().setName("SketchLine_59")
-SketchProjection_9 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_7"))
+SketchProjection_9 = Sketch_8.addProjection(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_3_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1]"), False)
SketchLine_59 = SketchProjection_9.createdFeature()
SketchLine_59.setName("SketchLine_60")
SketchLine_59.result().setName("SketchLine_60")
SketchConstraintDistance_16 = Sketch_8.setDistance(SketchCircle_11.center(), SketchCircle_12.center(), 16)
model.do()
Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchCircle_11_2f"), model.selection("FACE", "Sketch_8/Face-SketchCircle_12_2f")], model.selection(), 17, 0)
-Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "ExtrusionCut_3_1/Modfied_4"), 38, True)
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_3_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_1_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_4_2)(Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6)(ExtrusionCut_4_2/Modified_Face&Sketch_1/SketchArc_2_2)(ExtrusionCut_3_1/Generated_Face&Sketch_3/SketchCircle_5_2)_ExtrusionCut_6_1"), 38, True)
Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
SketchLine_60 = Sketch_9.addLine(-14, -36.99999999998992, 0, -36.99999999998992)
SketchLine_60.setName("SketchLine_61")
SketchLine_64.setName("SketchLine_65")
SketchLine_64.result().setName("SketchLine_65")
SketchLine_64.setAuxiliary(True)
-SketchPoint_6 = Sketch_9.addPoint(model.selection("VERTEX", "Sketch_8/Vertex-SketchPoint_5"))
+SketchPoint_6 = Sketch_9.addPoint(model.selection("VERTEX", "Sketch_8/SketchPoint_5"))
SketchConstraintCoincidence_92 = Sketch_9.setCoincident(SketchLine_64.result(), SketchPoint_6.coordinates())
SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_93")
SketchConstraintHorizontal_13 = Sketch_9.setHorizontal(SketchLine_64.result())
SketchConstraintCoincidence_93 = Sketch_9.setCoincident(SketchLine_62.startPoint(), SketchLine_64.result())
SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_94")
-SketchLine_65 = Sketch_9.addLine(model.selection("EDGE", "Sketch_7/Edge-SketchLine_52"))
+SketchLine_65 = Sketch_9.addLine(model.selection("EDGE", "Sketch_7/SketchLine_52"))
SketchLine_65.setName("SketchLine_66")
SketchLine_65.result().setName("SketchLine_66")
SketchConstraintCoincidence_94 = Sketch_9.setCoincident(SketchLine_60.endPoint(), SketchLine_65.result())
SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_95")
model.do()
-RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection("EDGE", "Sketch_9/Edge-SketchLine_65"), 360, 0, [model.selection("SOLID", "Extrusion_3_1")])
-RevolutionCut_1.result().setName("RevolutionCut_1_1")
+RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection("EDGE", "Sketch_9/SketchLine_65"), 360, 0, [model.selection("SOLID", "Extrusion_3_1")])
model.do()
from GeomAPI import GeomAPI_Shape
