Apply the history propagation also for the sketch results.

[modules/shaper.git] / test.models / piece_02.py

diff --git a/test.models/piece_02.py b/test.models/piece_02.py
index 92d8e891f89540de33fefe940a9d4f7ca6553cb0..6c10f5b7ff8e9b06b68cd8cd82844e41bb7d696a 100644 (file)
--- a/test.models/piece_02.py
+++ b/test.models/piece_02.py
@@ -72,26 +72,26 @@ SketchConstraintTangent_8 = Sketch_1.setTangent(SketchArc_4.results()[1], Sketch
 model.do()
 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_3f-SketchLine_5r-SketchLine_6r-SketchArc_1_2f-SketchArc_2_2f-SketchArc_3_2f-SketchArc_4_2f")], model.selection(), 76, 0)
 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face_1"))
-SketchLine_7 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/To_Face_1"))
+SketchLine_7 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1"))
 SketchLine_7.setName("SketchLine_8")
 SketchLine_7.result().setName("SketchLine_8")
 SketchLine_8 = Sketch_2.addLine(21, 45.99999999998655, 20.99999999998684, 0)
 SketchLine_8.setName("SketchLine_9")
 SketchLine_8.result().setName("SketchLine_9")
 SketchLine_8.setAuxiliary(True)
-SketchLine_9 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/To_Face_1"))
+SketchLine_9 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1"))
 SketchLine_9.setName("SketchLine_10")
 SketchLine_9.result().setName("SketchLine_10")
 SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchLine_8.startPoint(), SketchLine_9.result())
 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18")
-SketchLine_10 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1"))
+SketchLine_10 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/To_Face_1"))
 SketchLine_10.setName("SketchLine_11")
 SketchLine_10.result().setName("SketchLine_11")
 SketchConstraintCoincidence_18 = Sketch_2.setCoincident(SketchLine_8.endPoint(), SketchLine_10.result())
 SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_19")
 SketchConstraintMiddle_1 = Sketch_2.setMiddlePoint(SketchLine_8.startPoint(), SketchLine_9.result())
 SketchConstraintMiddle_2 = Sketch_2.setMiddlePoint(SketchLine_8.endPoint(), SketchLine_10.result())
-SketchLine_11 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1"))
+SketchLine_11 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/To_Face_1"))
 SketchLine_11.setName("SketchLine_12")
 SketchLine_11.result().setName("SketchLine_12")
 SketchPoint_1 = Sketch_2.addPoint(20.99999999999342, 22.99999999999327)
@@ -129,9 +129,7 @@ SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_2.results()[1], 2.5)
 SketchConstraintDistance_3 = Sketch_2.setDistance(SketchLine_12.result(), SketchCircle_4.center(), 8)
 model.do()
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchCircle_2_2r"), model.selection("WIRE", "Sketch_2/Wire-SketchCircle_3_2f")], model.selection(), 0, 15, [model.selection("SOLID", "Extrusion_1_1")])
-ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_4_2f")], model.selection(), model.selection("FACE", "Extrusion_1_1/From_Face_1"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
-ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
 Sketch_3 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
 SketchCircle_5 = Sketch_3.addCircle(20.99999999999342, 22.99999999999327, 19)
 SketchConstraintRadius_4 = Sketch_3.setRadius(SketchCircle_5.results()[1], 19)
@@ -139,12 +137,12 @@ SketchLine_13 = Sketch_3.addLine(41.99999999999999, 22.99999999998655, 0, 22.999
 SketchLine_13.setName("SketchLine_14")
 SketchLine_13.result().setName("SketchLine_14")
 SketchLine_13.setAuxiliary(True)
-SketchLine_14 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&Extrusion_1_1/Generated_Face_3"))
+SketchLine_14 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&Extrusion_1_1/Generated_Face_5"))
 SketchLine_14.setName("SketchLine_15")
 SketchLine_14.result().setName("SketchLine_15")
 SketchConstraintCoincidence_26 = Sketch_3.setCoincident(SketchLine_13.startPoint(), SketchLine_14.result())
 SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_27")
-SketchLine_15 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_2_1/Modfied_2"))
+SketchLine_15 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_2_1/Modfied_2"))
 SketchLine_15.setName("SketchLine_16")
 SketchLine_15.result().setName("SketchLine_16")
 SketchConstraintCoincidence_27 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchLine_15.result())
@@ -153,7 +151,7 @@ SketchLine_16 = Sketch_3.addLine(21, 45.99999999998655, 20.99999999998684, 0)
 SketchLine_16.setName("SketchLine_17")
 SketchLine_16.result().setName("SketchLine_17")
 SketchLine_16.setAuxiliary(True)
-SketchLine_17 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&Extrusion_1_1/Generated_Face_5"))
+SketchLine_17 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&Extrusion_1_1/Generated_Face_3"))
 SketchLine_17.setName("SketchLine_18")
 SketchLine_17.result().setName("SketchLine_18")
 SketchConstraintCoincidence_28 = Sketch_3.setCoincident(SketchLine_16.startPoint(), SketchLine_17.result())
@@ -186,24 +184,24 @@ SketchConstraintDistance_5 = Sketch_3.setDistance(SketchCircle_6.center(), Sketc
 model.do()
 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_5_2f-SketchCircle_6_2r-SketchCircle_7_2r")], model.selection(), 15, 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
 ExtrusionCut_3.result().setName("ExtrusionCut_3_1")
-Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_5"))
-SketchProjection_1 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"))
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_3"))
+SketchProjection_1 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/Generated_Face_2"))
 SketchLine_19 = SketchProjection_1.createdFeature()
 SketchLine_19.setName("SketchLine_20")
 SketchLine_19.result().setName("SketchLine_20")
-SketchProjection_2 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_4"))
+SketchProjection_2 = Sketch_4.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_4"))
 SketchLine_20 = SketchProjection_2.createdFeature()
 SketchLine_20.setName("SketchLine_21")
 SketchLine_20.result().setName("SketchLine_21")
 SketchLine_21 = Sketch_4.addLine(4.999999999999999, -28, 37, -28)
 SketchLine_21.setName("SketchLine_22")
 SketchLine_21.result().setName("SketchLine_22")
-SketchLine_22 = Sketch_4.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_6&Extrusion_1_1/Generated_Face_5"))
+SketchLine_22 = Sketch_4.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_2&Extrusion_1_1/Generated_Face_3"))
 SketchLine_22.setName("SketchLine_23")
 SketchLine_22.result().setName("SketchLine_23")
 SketchConstraintCoincidence_34 = Sketch_4.setCoincident(SketchLine_21.startPoint(), SketchLine_22.result())
 SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_35")
-SketchLine_23 = Sketch_4.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_4"))
+SketchLine_23 = Sketch_4.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_4"))
 SketchLine_23.setName("SketchLine_24")
 SketchLine_23.result().setName("SketchLine_24")
 SketchConstraintCoincidence_35 = Sketch_4.setCoincident(SketchLine_21.endPoint(), SketchLine_23.result())
@@ -292,19 +290,19 @@ SketchConstraintVertical_2 = Sketch_5.setVertical(SketchLine_30.result())
 SketchConstraintVertical_3 = Sketch_5.setVertical(SketchLine_31.result())
 SketchConstraintEqual_8 = Sketch_5.setEqual(SketchLine_29.result(), SketchLine_28.result())
 SketchConstraintEqual_9 = Sketch_5.setEqual(SketchLine_31.result(), SketchLine_30.result())
-SketchLine_32 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_1&Extrusion_2_1/To_Face_1"))
+SketchLine_32 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_1"))
 SketchLine_32.setName("SketchLine_33")
 SketchLine_32.result().setName("SketchLine_33")
 SketchConstraintDistance_7 = Sketch_5.setDistance(SketchLine_30.endPoint(), SketchLine_32.result(), 2)
-SketchLine_33 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/To_Face_1"))
+SketchLine_33 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_3&Extrusion_2_1/To_Face_1"))
 SketchLine_33.setName("SketchLine_34")
 SketchLine_33.result().setName("SketchLine_34")
 SketchConstraintDistance_8 = Sketch_5.setDistance(SketchLine_31.startPoint(), SketchLine_33.result(), 2)
-SketchLine_34 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_7&Extrusion_2_1/To_Face_1"))
+SketchLine_34 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_1&Extrusion_2_1/To_Face_1"))
 SketchLine_34.setName("SketchLine_35")
 SketchLine_34.result().setName("SketchLine_35")
 SketchConstraintDistance_9 = Sketch_5.setDistance(SketchLine_29.startPoint(), SketchLine_34.result(), 2)
-SketchLine_35 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_3&Extrusion_2_1/To_Face_1"))
+SketchLine_35 = Sketch_5.addLine(model.selection("EDGE", "Extrusion_2_1/Generated_Face_5&Extrusion_2_1/To_Face_1"))
 SketchLine_35.setName("SketchLine_36")
 SketchLine_35.result().setName("SketchLine_36")
 SketchConstraintDistance_10 = Sketch_5.setDistance(SketchLine_28.startPoint(), SketchLine_35.result(), 2)
@@ -370,11 +368,7 @@ SketchConstraintMiddle_16 = Sketch_5.setMiddlePoint(SketchLine_37.endPoint(), Sk
 SketchConstraintDistance_12 = Sketch_5.setDistance(SketchCircle_8.center(), SketchLine_37.result(), 8)
 model.do()
 ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_5/Wire-SketchLine_29f-SketchLine_30r-SketchLine_31r-SketchLine_32r-SketchArc_9_2f-SketchArc_10_2f-SketchArc_11_2f-SketchArc_12_2f")], model.selection(), 0, 15, [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "ExtrusionCut_3_1")])
-ExtrusionCut_4.result().setName("ExtrusionCut_4_1")
-ExtrusionCut_4.results()[1].setName("ExtrusionCut_4_2")
 ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchCircle_8_2f"), model.selection("FACE", "Sketch_5/Face-SketchCircle_9_2f")], model.selection(), 0, 20, [model.selection("SOLID", "ExtrusionCut_4_1"), model.selection("SOLID", "ExtrusionCut_4_2")])
-ExtrusionCut_5.result().setName("ExtrusionCut_5_1")
-ExtrusionCut_5.results()[1].setName("ExtrusionCut_5_2")
 Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/YOZ"))
 SketchLine_38 = Sketch_6.addLine(-59, 44, -59, 2)
 SketchLine_38.setName("SketchLine_39")
@@ -430,29 +424,28 @@ SketchConstraintLength_3 = Sketch_6.setLength(SketchLine_38.result(), 42)
 SketchConstraintLength_4 = Sketch_6.setLength(SketchLine_43.result(), 20)
 SketchConstraintLength_5 = Sketch_6.setLength(SketchLine_44.result(), 15)
 SketchConstraintLength_6 = Sketch_6.setLength(SketchLine_39.result(), 42)
-SketchProjection_3 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/Generated_Face_2"))
+SketchProjection_3 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"))
 SketchLine_46 = SketchProjection_3.createdFeature()
 SketchLine_46.setName("SketchLine_47")
 SketchLine_46.result().setName("SketchLine_47")
-SketchProjection_4 = Sketch_6.addProjection(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_3&Extrusion_1_1/Generated_Face_3"))
+SketchProjection_4 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_1_1/Modfied_1"))
 SketchLine_47 = SketchProjection_4.createdFeature()
 SketchLine_47.setName("SketchLine_48")
 SketchLine_47.result().setName("SketchLine_48")
-SketchProjection_5 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/Generated_Face_2"))
+SketchProjection_5 = Sketch_6.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"))
 SketchLine_48 = SketchProjection_5.createdFeature()
 SketchLine_48.setName("SketchLine_49")
 SketchLine_48.result().setName("SketchLine_49")
 SketchConstraintDistance_13 = Sketch_6.setDistance(SketchLine_38.endPoint(), SketchLine_46.result(), 2)
 SketchConstraintDistance_14 = Sketch_6.setDistance(SketchLine_38.startPoint(), SketchLine_47.result(), 17)
 model.do()
-ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_3"), -2, model.selection(), -2, [model.selection("SOLID", "ExtrusionCut_5_2")])
-ExtrusionCut_6.result().setName("ExtrusionCut_6_1")
-Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_7"))
+ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_5"), -2, model.selection(), -2, [model.selection("SOLID", "ExtrusionCut_5_2")])
+Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_1"))
 SketchLine_49 = Sketch_7.addLine(0, -22.99999999998656, -76, -22.99999999998655)
 SketchLine_49.setName("SketchLine_50")
 SketchLine_49.result().setName("SketchLine_50")
 SketchLine_49.setAuxiliary(True)
-SketchLine_50 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_3_1/Modfied_4"))
+SketchLine_50 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_3_1/Modfied_2"))
 SketchLine_50.setName("SketchLine_51")
 SketchLine_50.result().setName("SketchLine_51")
 SketchConstraintCoincidence_74 = Sketch_7.setCoincident(SketchLine_49.startPoint(), SketchLine_50.result())
@@ -465,12 +458,12 @@ SketchLine_51 = Sketch_7.addLine(-38, -40.99999999998656, -38, -4.99999999998656
 SketchLine_51.setName("SketchLine_52")
 SketchLine_51.result().setName("SketchLine_52")
 SketchLine_51.setAuxiliary(True)
-SketchLine_52 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_4_2/Modfied_4"))
+SketchLine_52 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_4_2/Modfied_3"))
 SketchLine_52.setName("SketchLine_53")
 SketchLine_52.result().setName("SketchLine_53")
 SketchConstraintCoincidence_76 = Sketch_7.setCoincident(SketchLine_51.startPoint(), SketchLine_52.result())
 SketchConstraintCoincidence_76.setName("SketchConstraintCoincidence_77")
-SketchLine_53 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_7"))
+SketchLine_53 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_1"))
 SketchLine_53.setName("SketchLine_54")
 SketchLine_53.result().setName("SketchLine_54")
 SketchConstraintCoincidence_77 = Sketch_7.setCoincident(SketchLine_51.endPoint(), SketchLine_53.result())
@@ -492,7 +485,7 @@ SketchProjection_6 = Sketch_8.addProjection(model.selection("EDGE", "Sketch_2/Ed
 SketchLine_54 = SketchProjection_6.createdFeature()
 SketchLine_54.setName("SketchLine_55")
 SketchLine_54.result().setName("SketchLine_55")
-SketchProjection_7 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_3_1/Modfied_4"))
+SketchProjection_7 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_3_1/Modfied_2"))
 SketchLine_55 = SketchProjection_7.createdFeature()
 SketchLine_55.setName("SketchLine_56")
 SketchLine_55.result().setName("SketchLine_56")
@@ -517,7 +510,7 @@ SketchConstraintMiddle_23 = Sketch_8.setMiddlePoint(SketchLine_56.result(), Sket
 SketchConstraintCoincidence_83 = Sketch_8.setCoincident(SketchLine_57.result(), SketchPoint_5.coordinates())
 SketchConstraintCoincidence_83.setName("SketchConstraintCoincidence_84")
 SketchConstraintPerpendicular_1 = Sketch_8.setPerpendicular(SketchLine_57.result(), SketchLine_56.result())
-SketchProjection_8 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_7&ExtrusionCut_4_2/Modfied_4"))
+SketchProjection_8 = Sketch_8.addProjection(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&ExtrusionCut_4_2/Modfied_3"))
 SketchLine_58 = SketchProjection_8.createdFeature()
 SketchLine_58.setName("SketchLine_59")
 SketchLine_58.result().setName("SketchLine_59")
@@ -541,7 +534,7 @@ SketchConstraintDistance_15 = Sketch_8.setDistance(SketchCircle_11.center(), Ske
 SketchConstraintDistance_16 = Sketch_8.setDistance(SketchCircle_11.center(), SketchCircle_12.center(), 16)
 model.do()
 Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchCircle_11_2f"), model.selection("FACE", "Sketch_8/Face-SketchCircle_12_2f")], model.selection(), 17, 0)
-Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "ExtrusionCut_3_1/Modfied_4"), 38, True)
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "ExtrusionCut_3_1/Modfied_2"), 38, True)
 Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 SketchLine_60 = Sketch_9.addLine(-14, -36.99999999998992, 0, -36.99999999998992)
 SketchLine_60.setName("SketchLine_61")
@@ -586,7 +579,6 @@ SketchConstraintCoincidence_94 = Sketch_9.setCoincident(SketchLine_60.endPoint()
 SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_95")
 model.do()
 RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection("EDGE", "Sketch_9/Edge-SketchLine_65"), 360, 0, [model.selection("SOLID", "Extrusion_3_1")])
-RevolutionCut_1.result().setName("RevolutionCut_1_1")
 model.do()
 
 from GeomAPI import  GeomAPI_Shape