-## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
+# Copyright (C) 2014-2023 CEA, EDF
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
from salome.shaper import model
[SketchArc_5, SketchArc_6, SketchLine_6, SketchLine_7, SketchLine_8, SketchArc_7, SketchArc_8] = SketchConstraintMirror_1.mirrored()
SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], "dint/2")
model.do()
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchArc_2_2r-SketchArc_3_2r-SketchArc_4_2f-SketchArc_5_2r-SketchArc_6_2f-SketchLine_6r-SketchLine_7r-SketchLine_8r-SketchArc_7_2r-SketchArc_8_2f")], model.selection(), 35, 35)
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_1_2f-SketchArc_3_2r-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchArc_4_2f-SketchArc_2_2r-SketchArc_5_2r-SketchArc_6_2f-SketchLine_6r-SketchLine_7r-SketchLine_8r-SketchArc_7_2r-SketchArc_8_2f")], model.selection(), 35, 35)
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
SketchArc_9 = Sketch_2.addArc(0, 106, 0, 78, 0, 134, True)
SketchConstraintRadius_3 = Sketch_2.setRadius(SketchArc_9.results()[1], 28)
SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchArc_9.startPoint(), SketchLine_11.startPoint())
SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchArc_9.endPoint(), SketchLine_11.endPoint())
model.do()
-Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_9_2f-SketchLine_11f")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_9_2r-SketchLine_11f")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Revolution_1_1")])
Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/YOZ"))
SketchLine_12 = Sketch_3.addLine(0, 106, -4, 106)
SketchLine_16.result().setName("SketchLine_17")
SketchConstraintCoincidence_22 = Sketch_3.setCoincident(SketchArc_10.endPoint(), SketchLine_16.result())
model.do()
-Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_12f-SketchLine_13f-SketchLine_17r-SketchLine_18r-SketchArc_10_2f")], model.selection(), "172/2", "172/2")
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Face-SketchLine_12r-SketchLine_13f-SketchArc_10_2f-SketchLine_17r-SketchLine_18r_wire")], model.selection(), "172/2", "172/2")
Cut_2 = model.addCut(Part_1_doc, [model.selection("SOLID", "Cut_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
-Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_10"))
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5"))
SketchLine_18 = Sketch_4.addLine(-65, 16, -65, -16)
SketchLine_18.setName("SketchLine_19")
SketchLine_18.result().setName("SketchLine_19")
SketchConstraintTangent_6 = Sketch_4.setTangent(SketchLine_21.result(), SketchArc_11.results()[1])
SketchConstraintTangent_7 = Sketch_4.setTangent(SketchArc_12.results()[1], SketchLine_20.result())
model.do()
-Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchArc_11_2f-SketchArc_12_2f-SketchLine_21f-SketchLine_22r")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_12"), 0)
-MultiTranslation_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], model.selection("EDGE", "Extrusion_1_1/To_Face_1&Extrusion_1_1/Generated_Face_12"), -130, 2)
+Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Face-SketchArc_11_2f-SketchLine_21f-SketchArc_12_2f-SketchLine_22r_wire")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3"), 0)
+LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], model.selection("EDGE", "[Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3]"), -130, 2)
Cut_3 = model.addCut(Part_1_doc, [model.selection("SOLID", "Cut_2_1")], [model.selection("COMPOUND", "LinearCopy_1_1")])
model.do()
