-## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
+# Copyright (C) 2014-2023 CEA, EDF
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
from salome.shaper import model
partSet = model.moduleDocument()
Part_1 = model.addPart(partSet)
Part_1_doc = Part_1.document()
-model.addParameter(Part_1_doc, "dint", "58")
-model.addParameter(Part_1_doc, "thick", "16")
-model.addParameter(Part_1_doc, "length", "172")
+Parameter_dint = model.addParameter(Part_1_doc, "dint", "58")
+Parameter_thick = model.addParameter(Part_1_doc, "thick", "16")
+Parameter_length = model.addParameter(Part_1_doc, "length", "172")
Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
SketchLine_1 = Sketch_1.addLine(model.selection("EDGE", "PartSet/OZ"))
SketchArc_1 = Sketch_1.addArc(-1.656176621148808e-020, 61, -36.69142117459658, 34.94736842105263, -1.927105092898643e-024, 106, True)
SketchConstraintCoincidence_7 = Sketch_1.setCoincident(SketchArc_2.startPoint(), SketchArc_4.startPoint())
SketchConstraintCoincidence_8 = Sketch_1.setCoincident(SketchArc_4.endPoint(), SketchLine_5.endPoint())
SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_3.results()[1], 12)
-SketchConstraintRadius_1.setName("SketchConstraintRadius_3")
SketchConstraintTangent_1 = Sketch_1.setTangent(SketchArc_1.results()[1], SketchArc_3.results()[1])
SketchConstraintTangent_2 = Sketch_1.setTangent(SketchArc_3.results()[1], SketchLine_3.result())
SketchConstraintCoincidence_9 = Sketch_1.setCoincident(SketchArc_4.center(), SketchArc_3.center())
SketchConstraintMirror_1 = Sketch_1.addMirror(SketchLine_1.result(), SketchConstraintMirror_1_objects)
[SketchArc_5, SketchArc_6, SketchLine_6, SketchLine_7, SketchLine_8, SketchArc_7, SketchArc_8] = SketchConstraintMirror_1.mirrored()
SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], "dint/2")
-SketchConstraintRadius_2.setName("SketchConstraintRadius_5")
model.do()
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchArc_2_2r-SketchArc_3_2r-SketchArc_4_2f-SketchArc_5_2r-SketchArc_6_2f-SketchLine_6r-SketchLine_7r-SketchLine_8r-SketchArc_7_2r-SketchArc_8_2f")], model.selection(), 35, 35)
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_1_2f-SketchArc_3_2r-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchArc_4_2f-SketchArc_2_2r-SketchArc_5_2r-SketchArc_6_2f-SketchLine_6r-SketchLine_7r-SketchLine_8r-SketchArc_7_2r-SketchArc_8_2f")], model.selection(), 35, 35)
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOZ"))
-SketchArc_9 = Sketch_2.addArc(-0.6283186887989762, 106, 0, 78.00705060867459, 0, 133.9929493913254, True)
+SketchArc_9 = Sketch_2.addArc(0, 106, 0, 78, 0, 134, True)
SketchConstraintRadius_3 = Sketch_2.setRadius(SketchArc_9.results()[1], 28)
-SketchConstraintRadius_3.setName("SketchConstraintRadius_4")
SketchLine_9 = Sketch_2.addLine(model.selection("EDGE", "PartSet/OX"))
SketchConstraintDistance_3 = Sketch_2.setDistance(SketchArc_9.center(), SketchLine_9.result(), "61+dint/2+thick")
SketchLine_10 = Sketch_2.addLine(model.selection("EDGE", "PartSet/OZ"))
SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchArc_9.startPoint(), SketchLine_10.result())
SketchConstraintCoincidence_14 = Sketch_2.setCoincident(SketchArc_9.endPoint(), SketchLine_10.result())
-SketchLine_11 = Sketch_2.addLine(0, 78.00705060867459, 0, 133.9929493913254)
-SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchArc_9.startPoint(), SketchLine_11.startPoint())
-SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchArc_9.endPoint(), SketchLine_11.endPoint())
+SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchArc_9.center(), SketchLine_10.result())
+SketchLine_11 = Sketch_2.addLine(0, 78, 0, 134)
+SketchConstraintCoincidence_16 = Sketch_2.setCoincident(SketchArc_9.startPoint(), SketchLine_11.startPoint())
+SketchConstraintCoincidence_17 = Sketch_2.setCoincident(SketchArc_9.endPoint(), SketchLine_11.endPoint())
model.do()
-Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_9_2f-SketchLine_11f")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
-Boolean_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Revolution_1_1")])
+Revolution_1 = model.addRevolution(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_9_2r-SketchLine_11f")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
+Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Revolution_1_1")])
Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/YOZ"))
-SketchLine_12 = Sketch_3.addLine(2.220446049250313e-016, 106, -4, 106)
+SketchLine_12 = Sketch_3.addLine(0, 106, -4, 106)
SketchLine_13 = Sketch_3.addLine(-4, 106, -4, 67.34428877022477)
-SketchConstraintCoincidence_17 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
-SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18")
+SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchLine_12.endPoint(), SketchLine_13.startPoint())
SketchConstraintHorizontal_3 = Sketch_3.setHorizontal(SketchLine_12.result())
SketchConstraintVertical_2 = Sketch_3.setVertical(SketchLine_13.result())
SketchPoint_1 = Sketch_3.addPoint(model.selection("VERTEX", "PartSet/Origin"))
SketchConstraintDistance_4 = Sketch_3.setDistance(SketchPoint_1.coordinates(), SketchLine_12.result(), "61+90/2")
-SketchConstraintDistance_4.setName("SketchConstraintDistance_5")
SketchLine_14 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OZ"))
SketchLine_14.setName("SketchLine_15")
SketchLine_14.result().setName("SketchLine_15")
-SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchLine_12.startPoint(), SketchLine_14.result())
-SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_20")
+SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_12.startPoint(), SketchLine_14.result())
SketchConstraintLength_2 = Sketch_3.setLength(SketchLine_12.result(), "8/2")
SketchArc_10 = Sketch_3.addArc(0, 61, -4, 67.34428877022477, 4, 67.34428877022477, False)
-SketchConstraintCoincidence_19 = Sketch_3.setCoincident(SketchLine_14.result(), SketchArc_10.center())
+SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchLine_14.result(), SketchArc_10.center())
SketchConstraintRadius_4 = Sketch_3.setRadius(SketchArc_10.results()[1], "15/2")
-SketchConstraintRadius_4.setName("SketchConstraintRadius_6")
SketchLine_15 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OY"))
SketchLine_15.setName("SketchLine_16")
SketchLine_15.result().setName("SketchLine_16")
SketchConstraintDistance_5 = Sketch_3.setDistance(SketchArc_10.center(), SketchLine_15.result(), 61)
-SketchConstraintDistance_5.setName("SketchConstraintDistance_6")
-SketchConstraintCoincidence_20 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchArc_10.startPoint())
-SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_21")
+SketchConstraintCoincidence_21 = Sketch_3.setCoincident(SketchLine_13.endPoint(), SketchArc_10.startPoint())
SketchConstraintMirror_2 = Sketch_3.addMirror(SketchLine_14.result(), [SketchLine_13.result(), SketchLine_12.result()])
[SketchLine_16, SketchLine_17] = SketchConstraintMirror_2.mirrored()
SketchLine_17.setName("SketchLine_18")
SketchLine_17.result().setName("SketchLine_18")
SketchLine_16.setName("SketchLine_17")
SketchLine_16.result().setName("SketchLine_17")
-SketchConstraintCoincidence_21 = Sketch_3.setCoincident(SketchArc_10.endPoint(), SketchLine_16.result())
-SketchConstraintCoincidence_21.setName("SketchConstraintCoincidence_22")
+SketchConstraintCoincidence_22 = Sketch_3.setCoincident(SketchArc_10.endPoint(), SketchLine_16.result())
model.do()
-Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Wire-SketchLine_12f-SketchLine_13f-SketchLine_17r-SketchLine_18r-SketchArc_10_2f")], model.selection(), "172/2", "172/2")
-Boolean_2 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
-Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"))
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_3/Face-SketchLine_12r-SketchLine_13f-SketchArc_10_2f-SketchLine_17r-SketchLine_18r_wire")], model.selection(), "172/2", "172/2")
+Cut_2 = model.addCut(Part_1_doc, [model.selection("SOLID", "Cut_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5"))
SketchLine_18 = Sketch_4.addLine(-65, 16, -65, -16)
SketchLine_18.setName("SketchLine_19")
SketchLine_18.result().setName("SketchLine_19")
SketchConstraintLength_3 = Sketch_4.setLength(SketchLine_18.result(), 32)
SketchPoint_2 = Sketch_4.addPoint(model.selection("VERTEX", "PartSet/Origin"))
SketchConstraintDistance_6 = Sketch_4.setDistance(SketchPoint_2.coordinates(), SketchLine_18.result(), "130/2")
-SketchConstraintDistance_6.setName("SketchConstraintDistance_7")
SketchPoint_3 = Sketch_4.addPoint(-65, 0)
SketchPoint_3.setAuxiliary(True)
SketchConstraintMiddle_1 = Sketch_4.setMiddlePoint(SketchPoint_3.coordinates(), SketchLine_18.result())
SketchLine_19 = Sketch_4.addLine(model.selection("EDGE", "PartSet/OX"))
SketchLine_19.setName("SketchLine_20")
SketchLine_19.result().setName("SketchLine_20")
-SketchConstraintCoincidence_22 = Sketch_4.setCoincident(SketchPoint_3.coordinates(), SketchLine_19.result())
-SketchConstraintCoincidence_22.setName("SketchConstraintCoincidence_23")
+SketchConstraintCoincidence_23 = Sketch_4.setCoincident(SketchPoint_3.coordinates(), SketchLine_19.result())
SketchArc_11 = Sketch_4.addArc(-65, 16, -59, 16, -71, 16, False)
-SketchConstraintCoincidence_23 = Sketch_4.setCoincident(SketchLine_18.startPoint(), SketchArc_11.center())
-SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_24")
+SketchConstraintCoincidence_24 = Sketch_4.setCoincident(SketchLine_18.startPoint(), SketchArc_11.center())
SketchArc_12 = Sketch_4.addArc(-65, -16, -59, -16.00003459934639, -71, -16, True)
-SketchConstraintCoincidence_24 = Sketch_4.setCoincident(SketchLine_18.endPoint(), SketchArc_12.center())
-SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_25")
+SketchConstraintCoincidence_25 = Sketch_4.setCoincident(SketchLine_18.endPoint(), SketchArc_12.center())
SketchConstraintRadius_5 = Sketch_4.setRadius(SketchArc_11.results()[1], 6)
-SketchConstraintRadius_5.setName("SketchConstraintRadius_7")
SketchLine_20 = Sketch_4.addLine(-71, 16, -71, -16)
SketchLine_20.setName("SketchLine_21")
SketchLine_20.result().setName("SketchLine_21")
-SketchConstraintCoincidence_25 = Sketch_4.setCoincident(SketchArc_11.endPoint(), SketchLine_20.startPoint())
-SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_26")
-SketchConstraintCoincidence_26 = Sketch_4.setCoincident(SketchArc_12.endPoint(), SketchLine_20.endPoint())
-SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_27")
+SketchConstraintCoincidence_26 = Sketch_4.setCoincident(SketchArc_11.endPoint(), SketchLine_20.startPoint())
+SketchConstraintCoincidence_27 = Sketch_4.setCoincident(SketchArc_12.endPoint(), SketchLine_20.endPoint())
SketchLine_21 = Sketch_4.addLine(-59, 16, -59, -16.00003459934639)
SketchLine_21.setName("SketchLine_22")
SketchLine_21.result().setName("SketchLine_22")
-SketchConstraintCoincidence_27 = Sketch_4.setCoincident(SketchArc_11.startPoint(), SketchLine_21.startPoint())
-SketchConstraintCoincidence_27.setName("SketchConstraintCoincidence_28")
-SketchConstraintCoincidence_28 = Sketch_4.setCoincident(SketchArc_12.startPoint(), SketchLine_21.endPoint())
-SketchConstraintCoincidence_28.setName("SketchConstraintCoincidence_29")
+SketchConstraintCoincidence_28 = Sketch_4.setCoincident(SketchArc_11.startPoint(), SketchLine_21.startPoint())
+SketchConstraintCoincidence_29 = Sketch_4.setCoincident(SketchArc_12.startPoint(), SketchLine_21.endPoint())
SketchConstraintVertical_4 = Sketch_4.setVertical(SketchLine_20.result())
SketchConstraintVertical_5 = Sketch_4.setVertical(SketchLine_21.result())
SketchConstraintTangent_5 = Sketch_4.setTangent(SketchLine_20.result(), SketchArc_11.results()[1])
SketchConstraintTangent_6 = Sketch_4.setTangent(SketchLine_21.result(), SketchArc_11.results()[1])
SketchConstraintTangent_7 = Sketch_4.setTangent(SketchArc_12.results()[1], SketchLine_20.result())
model.do()
-Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Wire-SketchArc_11_2f-SketchArc_12_2f-SketchLine_21f-SketchLine_22r")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_2"), 0)
-MultiTranslation_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], model.selection("EDGE", "Extrusion_1_1/To_Face_1&Extrusion_1_1/Generated_Face_2"), -130, 2)
-Boolean_3 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_2_1")], [model.selection("COMPOUND", "MultiTranslation_1_1")])
+Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_4/Face-SketchArc_11_2f-SketchLine_21f-SketchArc_12_2f-SketchLine_22r_wire")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3"), 0)
+LinearCopy_1 = model.addMultiTranslation(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], model.selection("EDGE", "[Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_3]"), -130, 2)
+Cut_3 = model.addCut(Part_1_doc, [model.selection("SOLID", "Cut_2_1")], [model.selection("COMPOUND", "LinearCopy_1_1")])
model.do()
+
+# Test reexecution after parameter change
+Parameter_dint.setValue(62)
+Parameter_thick.setValue(20)
+Parameter_length.setValue(200)
+model.do()
+model.testResultsVolumes(Cut_3, [409550.515091864974237978458404541])
+Parameter_dint.setValue(58)
+Parameter_thick.setValue(16)
+Parameter_length.setValue(172)
+
model.end()
+
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Cut_3, 1)
+model.testNbSubResults(Cut_3, [0])
+model.testNbSubShapes(Cut_3, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Cut_3, GeomAPI_Shape.FACE, [32])
+model.testNbSubShapes(Cut_3, GeomAPI_Shape.EDGE, [192])
+model.testNbSubShapes(Cut_3, GeomAPI_Shape.VERTEX, [384])
+model.testResultsVolumes(Cut_3, [307084.534467286430299282073974609])
+
+assert(model.checkPythonDump())
