-## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
+# Copyright (C) 2014-2023 CEA, EDF
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
from SketchAPI import *
SketchConstraintRadius_2 = Sketch_1.setRadius(SketchArc_2.results()[1], 2.3)
SketchConstraintCoincidence_23 = Sketch_1.setCoincident(SketchLine_5.result(), SketchLine_9.startPoint())
model.do()
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_1f-SketchLine_10f-SketchLine_11f-SketchLine_12f-SketchLine_13f-SketchLine_4f-SketchLine_8f-SketchLine_9f-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), "307/2.", "307/2.")
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_1r-SketchLine_10f-SketchArc_1_2r-SketchLine_11f-SketchLine_4f-SketchLine_13f-SketchArc_2_2f-SketchLine_12f-SketchLine_8f-SketchLine_9f_wire")], model.selection(), "307/2.", "307/2.")
Extrusion_1.setName("Profil")
Extrusion_1.result().setName("Extrusion_1_1")
-Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_7"))
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_12"))
SketchLine_14 = Sketch_2.addLine(149.5, -2.3, 153.5, -2.3)
-SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6&Extrusion_1_1/To_Face_1"))
+SketchPoint_1 = Sketch_2.addPoint(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_12][Extrusion_1_1/To_Face]"))
SketchConstraintCoincidence_24 = Sketch_2.setCoincident(SketchLine_14.endPoint(), SketchPoint_1.result())
SketchLine_15 = Sketch_2.addLine(153.5, -2.3, 153.5, 7.7)
SketchLine_16 = Sketch_2.addLine(153.5, 7.7, 149.5, 7.7)
SketchConstraintLength_5.setName("SketchConstraintLength_6")
SketchConstraintDistance_2 = Sketch_2.setDistance(SketchLine_16.endPoint(), SketchLine_21.result(), 299)
SketchConstraintEqual_1 = Sketch_2.setEqual(SketchLine_16.result(), SketchLine_20.result())
-SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6&Extrusion_1_1/From_Face_1"))
+SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_12][Extrusion_1_1/From_Face]"))
SketchPoint_2.setName("SketchPoint_4")
SketchPoint_2.result().setName("SketchPoint_4")
SketchConstraintCoincidence_34 = Sketch_2.setCoincident(SketchLine_19.startPoint(), SketchPoint_2.coordinates())
SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_39")
model.do()
-ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")])
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4"), 0, model.selection(), 0, [model.selection("SOLID", "Extrusion_1_1")])
ExtrusionCut_1.setName("Decoupe_Angle")
ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
-Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_8"))
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_8"))
SketchLine_22 = Sketch_3.addLine(153.5, -10.3, 153.5, -8.3)
SketchLine_22.setName("SketchLine_29")
SketchLine_22.result().setName("SketchLine_29")
-SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_9&ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_8"))
+SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_9][ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_8]"))
SketchPoint_3.setName("SketchPoint_5")
SketchPoint_3.result().setName("SketchPoint_5")
SketchConstraintCoincidence_35 = Sketch_3.setCoincident(SketchLine_22.startPoint(), SketchPoint_3.result())
SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_40")
-SketchLine_23 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_8"))
+SketchLine_23 = Sketch_3.addLine(model.selection("EDGE", "[ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_8]"))
SketchLine_23.setName("SketchLine_30")
SketchLine_23.result().setName("SketchLine_30")
SketchConstraintCoincidence_36 = Sketch_3.setCoincident(SketchLine_22.endPoint(), SketchLine_23.result())
SketchConstraintLength_6.setName("SketchConstraintLength_8")
SketchConstraintAngle_1 = Sketch_3.setAngleBackward(SketchLine_24.result(), SketchLine_25.result(), 45)
SketchConstraintAngle_1.setName("SketchConstraintAngle_2")
-SketchLine_26 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_8"))
+SketchLine_26 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/SketchLine_8"))
SketchLine_26.setName("SketchLine_34")
SketchLine_26.result().setName("SketchLine_34")
SketchConstraintMirror_1_objects = [SketchLine_22.result(), SketchLine_25.result(), SketchLine_24.result()]
ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")])
ExtrusionCut_2.setName("Chamfrein_1")
ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
-Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_7"))
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_13"))
SketchLine_30 = Sketch_4.addLine(-149.5, 10.3, -149.5, 8.3)
SketchLine_30.setName("SketchLine_35")
SketchLine_30.result().setName("SketchLine_35")
-SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_11&ExtrusionCut_1_1/Modfied_7&ExtrusionCut_1_1/Modfied_6"))
+SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "[ExtrusionCut_1_1/Generated_Face&Sketch_2/SketchLine_21][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_13][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_4]"))
SketchPoint_4.setName("SketchPoint_6")
SketchPoint_4.result().setName("SketchPoint_6")
SketchConstraintCoincidence_42 = Sketch_4.setCoincident(SketchLine_30.startPoint(), SketchPoint_4.result())
SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_43")
-SketchLine_31 = Sketch_4.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_11&ExtrusionCut_1_1/Modfied_7"))
+SketchLine_31 = Sketch_4.addLine(model.selection("EDGE", "[ExtrusionCut_1_1/Generated_Face&Sketch_2/SketchLine_21][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_13]"))
SketchLine_31.setName("SketchLine_36")
SketchLine_31.result().setName("SketchLine_36")
SketchConstraintCoincidence_43 = Sketch_4.setCoincident(SketchLine_30.endPoint(), SketchLine_31.result())
SketchLine_38.result().setName("SketchLine_43")
SketchLine_38.setAuxiliary(True)
SketchConstraintHorizontal_10 = Sketch_4.setHorizontal(SketchLine_38.result())
-SketchProjection_1 = Sketch_4.addProjection(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_5&ExtrusionCut_2_1/Modfied_2"))
+SketchProjection_1 = Sketch_4.addProjection(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Sketch_1/SketchLine_1][ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/To_Face]"), False)
SketchLine_39 = SketchProjection_1.createdFeature()
SketchLine_39.setName("SketchLine_44")
SketchLine_39.result().setName("SketchLine_44")
model.do()
Sketch_4.setName("Sketch_5")
Sketch_4.result().setName("Sketch_5")
-ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_5")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_5"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
-ExtrusionCut_3.result().setName("ExtrusionCut_3_1")
-Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_9"))
+ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_5")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_11"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
+Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_12"))
SketchLine_40 = Sketch_5.addLine(152.2999838762584, -21.04999053274691, 153.5, -21.04999053274714)
SketchLine_40.setName("SketchLine_58")
SketchLine_40.result().setName("SketchLine_58")
SketchLine_41 = Sketch_5.addLine(152.2999838292651, -45.04999053274704, 153.5, -45.04999053274702)
SketchLine_41.setName("SketchLine_57")
SketchLine_41.result().setName("SketchLine_57")
-SketchLine_42 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_1_1/Modfied_9"))
+SketchLine_42 = Sketch_5.addLine(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/To_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_12]"))
SketchLine_42.setName("SketchLine_46")
SketchLine_42.result().setName("SketchLine_46")
SketchLine_43 = Sketch_5.addLine(150.8, -45.04999053274702, 153.5, -45.04999053274702)
SketchConstraintLength_9 = Sketch_5.setLength(SketchLine_44.result(), 8)
SketchConstraintLength_9.setName("SketchConstraintLength_10")
SketchConstraintEqual_4 = Sketch_5.setEqual(SketchLine_47.result(), SketchLine_53.result())
-SketchPoint_5 = Sketch_5.addPoint(153.5, -28.84999053274707)
+SketchPoint_5 = Sketch_5.addPoint(153.5, -28.85)
SketchPoint_5.setName("SketchPoint_7")
SketchPoint_5.result().setName("SketchPoint_7")
SketchConstraintMiddle_1 = Sketch_5.setMiddlePoint(SketchPoint_5.coordinates(), SketchLine_42.result())
-SketchLine_55 = Sketch_5.addLine(153.5, -28.84999053274707, -153.5, -28.84999053274707)
+SketchLine_55 = Sketch_5.addLine(153.5, -28.85, -153.5, -28.85)
SketchLine_55.setName("SketchLine_54")
SketchLine_55.result().setName("SketchLine_54")
SketchLine_55.setAuxiliary(True)
SketchConstraintCoincidence_66 = Sketch_5.setCoincident(SketchPoint_5.coordinates(), SketchLine_55.startPoint())
SketchConstraintCoincidence_66.setName("SketchConstraintCoincidence_71")
-SketchLine_56 = Sketch_5.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_3&ExtrusionCut_1_1/Modfied_9"))
+SketchLine_56 = Sketch_5.addLine(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/From_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_10]"))
SketchLine_56.setName("SketchLine_55")
SketchLine_56.result().setName("SketchLine_55")
SketchConstraintCoincidence_67 = Sketch_5.setCoincident(SketchLine_55.endPoint(), SketchLine_56.result())
model.do()
Sketch_5.setName("Sketch_6")
Sketch_5.result().setName("Sketch_6")
-ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_6/Wire-SketchArc_9_2f-SketchArc_10_2f-SketchLine_73r-SketchLine_74r-SketchLine_75r-SketchLine_76r"), model.selection("WIRE", "Sketch_6/Wire-SketchLine_58f-SketchLine_61f-SketchLine_60f-SketchLine_51f-SketchArc_4_2f-SketchArc_5_2f"), model.selection("WIRE", "Sketch_6/Wire-SketchLine_57f-SketchLine_47f-SketchLine_62f-SketchLine_63f-SketchArc_3_2f-SketchArc_6_2f")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_3_1")])
-ExtrusionCut_4.result().setName("ExtrusionCut_4_1")
-Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_4_1/Modfied_1"))
-SketchArc_11 = Sketch_6.addArc(44.89, -23.54999053274703, 43.89, -23.54999053274703, 44.89, -22.54999053274703, False)
-SketchArc_12 = Sketch_6.addArc(44.89, -13.54999053274703, 44.89, -14.54999053274703, 43.89, -13.54999053274703, False)
-SketchArc_13 = Sketch_6.addArc(5.89, -13.54999053274703, 6.89, -13.54999053274703, 5.89, -14.54999053274703, False)
+ExtrusionCut_4_objects_1 = [model.selection("WIRE", "Sketch_6/Face-SketchArc_9_2f-SketchLine_74r-SketchArc_10_2f-SketchLine_75r-SketchLine_73r-SketchLine_76r_wire"), model.selection("WIRE", "Sketch_6/Face-SketchLine_58r-SketchLine_51f-SketchLine_60f-SketchArc_5_2f-SketchLine_61f-SketchArc_4_2f_wire"), model.selection("WIRE", "Sketch_6/Face-SketchLine_57f-SketchLine_47f-SketchLine_62f-SketchArc_6_2f-SketchLine_63f-SketchArc_3_2f_wire")]
+ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_4_objects_1, model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_3_1")])
+Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_4_1/Modified_Face&Sketch_1/SketchLine_12"))
+SketchArc_11 = Sketch_6.addArc(44.89, -23.55, 43.89, -23.55, 44.89, -22.55, False)
+SketchArc_12 = Sketch_6.addArc(44.89, -13.55, 44.89, -14.55, 43.89, -13.55, False)
+SketchArc_13 = Sketch_6.addArc(5.89, -13.55, 6.89, -13.55, 5.89, -14.55, False)
SketchArc_13.setName("SketchArc_14")
SketchArc_13.result().setName("SketchArc_14")
SketchArc_13.results()[1].setName("SketchArc_14_2")
-SketchLine_76 = Sketch_6.addLine(6.89, -23.54999053274703, 43.89, -23.54999053274703)
+SketchLine_76 = Sketch_6.addLine(6.89, -23.55, 43.89, -23.55)
SketchLine_76.setName("SketchLine_81")
SketchLine_76.result().setName("SketchLine_81")
SketchConstraintCoincidence_92 = Sketch_6.setCoincident(SketchArc_11.startPoint(), SketchLine_76.endPoint())
SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_98")
-SketchLine_77 = Sketch_6.addLine(6.89, -13.54999053274703, 43.89, -13.54999053274703)
+SketchLine_77 = Sketch_6.addLine(6.89, -13.55, 43.89, -13.55)
SketchLine_77.setName("SketchLine_82")
SketchLine_77.result().setName("SketchLine_82")
SketchConstraintCoincidence_93 = Sketch_6.setCoincident(SketchArc_13.startPoint(), SketchLine_77.startPoint())
SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_99")
-SketchLine_78 = Sketch_6.addLine(44.89, -22.54999053274703, 44.89, -14.54999053274703)
+SketchLine_78 = Sketch_6.addLine(44.89, -22.55, 44.89, -14.55)
SketchLine_78.setName("SketchLine_83")
SketchLine_78.result().setName("SketchLine_83")
SketchConstraintCoincidence_94 = Sketch_6.setCoincident(SketchArc_12.startPoint(), SketchLine_78.endPoint())
SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_100")
-SketchLine_79 = Sketch_6.addLine(5.89, -22.54999053274703, 5.89, -14.54999053274703)
+SketchLine_79 = Sketch_6.addLine(5.89, -22.55, 5.89, -14.55)
SketchLine_79.setName("SketchLine_84")
SketchLine_79.result().setName("SketchLine_84")
SketchConstraintCoincidence_95 = Sketch_6.setCoincident(SketchArc_13.endPoint(), SketchLine_79.endPoint())
SketchLine_80.setName("SketchLine_85")
SketchLine_80.result().setName("SketchLine_85")
SketchConstraintDistance_12 = Sketch_6.setDistance(SketchLine_79.startPoint(), SketchLine_80.result(), 5.89)
-SketchLine_81 = Sketch_6.addLine(model.selection("EDGE", "Sketch_6/Edge-SketchLine_54"))
+SketchLine_81 = Sketch_6.addLine(model.selection("EDGE", "Sketch_6/SketchLine_54"))
SketchLine_81.setName("SketchLine_86")
SketchLine_81.result().setName("SketchLine_86")
SketchConstraintDistance_13 = Sketch_6.setDistance(SketchLine_76.endPoint(), SketchLine_81.result(), 5.3)
-SketchArc_14 = Sketch_6.addArc(5.89, -23.54999053274703, 5.89, -22.54999053274703, 6.89, -23.54999053274703, False)
+SketchArc_14 = Sketch_6.addArc(5.89, -23.55, 5.89, -22.55, 6.89, -23.55, False)
SketchArc_14.setName("SketchArc_15")
SketchArc_14.result().setName("SketchArc_15")
SketchArc_14.results()[1].setName("SketchArc_15_2")
SketchConstraintCoincidence_107.setName("SketchConstraintCoincidence_114")
SketchConstraintEqual_10 = Sketch_6.setEqual(SketchArc_11.results()[1], SketchArc_14.results()[1])
SketchConstraintEqual_10.setName("SketchConstraintEqual_11")
-SketchPoint_6 = Sketch_6.addPoint(0, -28.84999053274704)
+SketchPoint_6 = Sketch_6.addPoint(0, -28.85)
SketchPoint_6.setName("SketchPoint_8")
SketchPoint_6.result().setName("SketchPoint_8")
-SketchPoint_7 = Sketch_6.addPoint(50.77, -28.84999053274703)
+SketchPoint_7 = Sketch_6.addPoint(50.77, -28.85)
SketchPoint_7.setName("SketchPoint_9")
SketchPoint_7.result().setName("SketchPoint_9")
-SketchPoint_8 = Sketch_6.addPoint(101.54, -28.84999053274702)
+SketchPoint_8 = Sketch_6.addPoint(101.54, -28.85)
SketchPoint_8.setName("SketchPoint_10")
SketchPoint_8.result().setName("SketchPoint_10")
SketchConstraintCoincidence_108 = Sketch_6.setCoincident(SketchLine_80.result(), SketchPoint_6.coordinates())
SketchArc_23.setName("SketchArc_24")
SketchArc_23.result().setName("SketchArc_24")
SketchArc_23.results()[1].setName("SketchArc_24_2")
-SketchPoint_9 = Sketch_6.addPoint(0, -49.84999053274704)
+SketchPoint_9 = Sketch_6.addPoint(0, -49.85)
SketchPoint_9.setName("SketchPoint_11")
SketchPoint_9.result().setName("SketchPoint_11")
SketchConstraintCoincidence_112 = Sketch_6.setCoincident(SketchPoint_9.coordinates(), SketchLine_80.result())
SketchConstraintDistance_16 = Sketch_6.setDistance(SketchPoint_9.coordinates(), SketchLine_81.result(), "10+5.3+5.7")
SketchMultiTranslation_3_objects = [SketchArc_13.results()[1], SketchArc_34.results()[1], SketchArc_14.results()[1], SketchArc_33.results()[1], SketchArc_12.results()[1], SketchArc_11.results()[1], SketchArc_30.results()[1], SketchArc_29.results()[1], SketchArc_15.results()[1], SketchArc_16.results()[1], SketchArc_26.results()[1], SketchArc_25.results()[1], SketchArc_17.results()[1], SketchArc_18.results()[1], SketchArc_24.results()[1], SketchArc_23.results()[1], SketchArc_20.results()[1], SketchArc_22.results()[1], SketchArc_28.results()[1], SketchArc_27.results()[1], SketchArc_19.results()[1], SketchArc_21.results()[1], SketchArc_32.results()[1], SketchArc_31.results()[1], SketchLine_82.result(), SketchLine_77.result(), SketchLine_97.result(), SketchLine_94.result(), SketchLine_101.result(), SketchLine_99.result(), SketchLine_83.result(), SketchLine_88.result(), SketchLine_89.result(), SketchLine_86.result(), SketchLine_85.result(), SketchLine_100.result(), SketchLine_79.result(), SketchLine_92.result(), SketchLine_87.result(), SketchLine_91.result(), SketchLine_84.result(), SketchLine_96.result(), SketchLine_95.result(), SketchLine_93.result(), SketchLine_78.result(), SketchLine_98.result(), SketchLine_76.result(), SketchLine_90.result()]
SketchMultiTranslation_3 = Sketch_6.addTranslation(SketchMultiTranslation_3_objects, SketchPoint_6.coordinates(), SketchPoint_9.coordinates(), 2)
-[SketchArc_35, SketchArc_34, SketchArc_36, SketchArc_37, SketchArc_33, SketchArc_38, SketchArc_39, SketchArc_40, SketchArc_30, SketchArc_41, SketchArc_29, SketchArc_42, SketchArc_15, SketchArc_43, SketchArc_16, SketchArc_44, SketchArc_26, SketchArc_45, SketchArc_25, SketchArc_46, SketchArc_17, SketchArc_47, SketchArc_18, SketchArc_48, SketchArc_24, SketchArc_49, SketchArc_23, SketchArc_50, SketchArc_20, SketchArc_51, SketchArc_22, SketchArc_52, SketchArc_28, SketchArc_53, SketchArc_27, SketchArc_54, SketchArc_19, SketchArc_55, SketchArc_21, SketchArc_56, SketchArc_32, SketchArc_57, SketchArc_31, SketchArc_58, SketchLine_82, SketchLine_102, SketchLine_103, SketchLine_97, SketchLine_104, SketchLine_94, SketchLine_105, SketchLine_101, SketchLine_106, SketchLine_99, SketchLine_107, SketchLine_83, SketchLine_108, SketchLine_88, SketchLine_109, SketchLine_89, SketchLine_110, SketchLine_86, SketchLine_111, SketchLine_85, SketchLine_112, SketchLine_100, SketchLine_113, SketchLine_114, SketchLine_92, SketchLine_115, SketchLine_87, SketchLine_116, SketchLine_91, SketchLine_117, SketchLine_84, SketchLine_118, SketchLine_96, SketchLine_119, SketchLine_95, SketchLine_120, SketchLine_93, SketchLine_121, SketchLine_122, SketchLine_98, SketchLine_123, SketchLine_124, SketchLine_90, SketchLine_125] = SketchMultiTranslation_3.translated()
+[SketchArc_35, SketchArc_36, SketchArc_37, SketchArc_38, SketchArc_39, SketchArc_40, SketchArc_41, SketchArc_42, SketchArc_43, SketchArc_44, SketchArc_45, SketchArc_46, SketchArc_47, SketchArc_48, SketchArc_49, SketchArc_50, SketchArc_51, SketchArc_52, SketchArc_53, SketchArc_54, SketchArc_55, SketchArc_56, SketchArc_57, SketchArc_58, SketchLine_102, SketchLine_103, SketchLine_104, SketchLine_105, SketchLine_106, SketchLine_107, SketchLine_108, SketchLine_109, SketchLine_110, SketchLine_111, SketchLine_112, SketchLine_113, SketchLine_114, SketchLine_115, SketchLine_116, SketchLine_117, SketchLine_118, SketchLine_119, SketchLine_120, SketchLine_121, SketchLine_122, SketchLine_123, SketchLine_124, SketchLine_125] = SketchMultiTranslation_3.translatedList()
SketchLine_125.setName("SketchLine_130")
SketchLine_125.result().setName("SketchLine_130")
SketchLine_124.setName("SketchLine_129")
model.do()
Sketch_6.setName("Sketch_7")
Sketch_6.result().setName("Sketch_7")
-ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_7/Wire-SketchArc_20_2f-SketchArc_21_2f-SketchArc_22_2f-SketchArc_23_2f-SketchLine_91r-SketchLine_92f-SketchLine_93r-SketchLine_94f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_52_2f-SketchArc_53_2f-SketchArc_56_2f-SketchArc_57_2f-SketchLine_114r-SketchLine_115f-SketchLine_116r-SketchLine_121f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_44_2f-SketchArc_45_2f-SketchArc_48_2f-SketchArc_49_2f-SketchLine_107f-SketchLine_113f-SketchLine_117r-SketchLine_123r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_16_2f-SketchArc_17_2f-SketchArc_18_2f-SketchArc_19_2f-SketchLine_87f-SketchLine_88f-SketchLine_89r-SketchLine_90r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_11_2f-SketchArc_12_2f-SketchArc_14_2f-SketchLine_81f-SketchLine_82r-SketchLine_83f-SketchLine_84r-SketchArc_15_2f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_36_2f-SketchArc_38_2f-SketchArc_40_2f-SketchArc_41_2f-SketchLine_108r-SketchLine_119r-SketchLine_127f-SketchLine_129f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_37_2f-SketchArc_39_2f-SketchArc_42_2f-SketchArc_43_2f-SketchLine_118r-SketchLine_120f-SketchLine_122r-SketchLine_130f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_24_2f-SketchArc_25_2f-SketchArc_26_2f-SketchArc_27_2f-SketchLine_98f-SketchLine_100r-SketchLine_101f-SketchLine_103r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_30_2f-SketchArc_31_2f-SketchArc_34_2f-SketchArc_35_2f-SketchLine_95f-SketchLine_96r-SketchLine_97f-SketchLine_105r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_46_2f-SketchArc_47_2f-SketchArc_50_2f-SketchArc_51_2f-SketchLine_124f-SketchLine_125r-SketchLine_126f-SketchLine_128r"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_54_2f-SketchArc_55_2f-SketchArc_58_2f-SketchArc_59_2f-SketchLine_109f-SketchLine_110r-SketchLine_111r-SketchLine_112f"), model.selection("WIRE", "Sketch_7/Wire-SketchArc_28_2f-SketchArc_29_2f-SketchArc_32_2f-SketchArc_33_2f-SketchLine_99r-SketchLine_102f-SketchLine_104f-SketchLine_106r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_4_1")])
-ExtrusionCut_5.result().setName("ExtrusionCut_5_1")
-Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_5_1/Modfied_1"))
-SketchLine_126 = Sketch_7.addLine(-153.5, -37.049990532747, -152.3000099350335, -37.0499905327475)
+ExtrusionCut_5_objects_1 = [model.selection("WIRE", "Sketch_7/Face-SketchArc_20_2f-SketchLine_93r-SketchArc_21_2f-SketchLine_91r-SketchArc_23_2f-SketchLine_94f-SketchArc_22_2f-SketchLine_92f_wire"), model.selection("WIRE", "Sketch_7/Face-SketchArc_52_2f-SketchLine_116r-SketchArc_53_2f-SketchLine_115f-SketchArc_57_2f-SketchLine_121f-SketchArc_56_2f-SketchLine_114r_wire"), model.selection("WIRE", "Sketch_7/Face-SketchArc_44_2f-SketchLine_117r-SketchArc_45_2f-SketchLine_113f-SketchArc_49_2f-SketchLine_107f-SketchArc_48_2f-SketchLine_123r_wire"), model.selection("WIRE", "Sketch_7/Face-SketchArc_16_2f-SketchLine_90r-SketchArc_17_2f-SketchLine_88f-SketchArc_19_2f-SketchLine_87f-SketchArc_18_2f-SketchLine_89r_wire"), model.selection("WIRE", "Sketch_7/Face-SketchArc_11_2r-SketchLine_83f-SketchArc_12_2f-SketchLine_82r-SketchArc_14_2f-SketchLine_84r-SketchArc_15_2f-SketchLine_81f_wire"), model.selection("WIRE", "Sketch_7/Face-SketchArc_36_2f-SketchLine_119r-SketchArc_38_2f-SketchLine_129f-SketchArc_41_2f-SketchLine_127f-SketchArc_40_2f-SketchLine_108r_wire"), model.selection("WIRE", "Sketch_7/Face-SketchArc_37_2f-SketchLine_130f-SketchArc_42_2f-SketchLine_122r-SketchArc_43_2f-SketchLine_118r-SketchArc_39_2f-SketchLine_120f_wire"), model.selection("WIRE", "Sketch_7/Face-SketchArc_24_2f-SketchLine_103r-SketchArc_26_2f-SketchLine_98f-SketchArc_27_2f-SketchLine_101f-SketchArc_25_2f-SketchLine_100r_wire"), model.selection("WIRE", "Sketch_7/Face-SketchArc_30_2f-SketchLine_105r-SketchArc_34_2f-SketchLine_97f-SketchArc_35_2f-SketchLine_95f-SketchArc_31_2f-SketchLine_96r_wire"), model.selection("WIRE", "Sketch_7/Face-SketchArc_46_2f-SketchLine_124f-SketchArc_50_2f-SketchLine_125r-SketchArc_51_2f-SketchLine_128r-SketchArc_47_2f-SketchLine_126f_wire"), model.selection("WIRE", "Sketch_7/Face-SketchArc_54_2f-SketchLine_112f-SketchArc_58_2f-SketchLine_110r-SketchArc_59_2f-SketchLine_111r-SketchArc_55_2f-SketchLine_109f_wire"), model.selection("WIRE", "Sketch_7/Face-SketchArc_28_2f-SketchLine_102f-SketchArc_29_2f-SketchLine_104f-SketchArc_33_2f-SketchLine_99r-SketchArc_32_2f-SketchLine_106r_wire")]
+ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_5_objects_1, model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_4_1")])
+Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_5_1/Modified_Face&Sketch_1/SketchLine_12"))
+SketchLine_126 = Sketch_7.addLine(-153.5, -37.05, -152.3, -37.05)
SketchLine_126.setName("SketchLine_135")
SketchLine_126.result().setName("SketchLine_135")
-SketchLine_127 = Sketch_7.addLine(-150.8, -38.54999290880026, -150.8, -43.54999111476925)
+SketchLine_127 = Sketch_7.addLine(-150.8, -38.55, -150.8, -43.55)
SketchLine_127.setName("SketchLine_138")
SketchLine_127.result().setName("SketchLine_138")
-SketchPoint_10 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_6/Vertex-SketchLine_67s-SketchLine_68e-SketchLine_69e"))
+SketchPoint_10 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_6/SketchLine_67_StartVertex"))
SketchPoint_10.setName("SketchPoint_12")
SketchPoint_10.result().setName("SketchPoint_12")
-SketchLine_128 = Sketch_7.addLine(-150.8, -45.049990532747, -153.5, -45.04999053274734)
+SketchLine_128 = Sketch_7.addLine(-150.8, -45.05, -153.5, -45.05)
SketchLine_128.setName("SketchLine_131")
SketchLine_128.result().setName("SketchLine_131")
SketchLine_128.setAuxiliary(True)
SketchConstraintCoincidence_113 = Sketch_7.setCoincident(SketchLine_128.endPoint(), SketchPoint_10.result())
SketchConstraintCoincidence_113.setName("SketchConstraintCoincidence_120")
-SketchLine_129 = Sketch_7.addLine(-153.5, -45.04999053274734, -153.5, -37.049990532747)
+SketchLine_129 = Sketch_7.addLine(-153.5, -45.05, -153.5, -37.05)
SketchLine_129.setName("SketchLine_132")
SketchLine_129.result().setName("SketchLine_132")
-SketchLine_130 = Sketch_7.addLine(-152.2999985784279, -45.04999053274759, -153.5, -45.04999053274734)
+SketchLine_130 = Sketch_7.addLine(-152.3, -45.05, -153.5, -45.05)
SketchLine_130.setName("SketchLine_137")
SketchLine_130.result().setName("SketchLine_137")
-SketchLine_131 = Sketch_7.addLine(-150.8, -37.04999053274745, -150.8, -45.049990532747)
+SketchLine_131 = Sketch_7.addLine(-150.8, -37.05, -150.8, -45.05)
SketchLine_131.setName("SketchLine_134")
SketchLine_131.result().setName("SketchLine_134")
SketchLine_131.setAuxiliary(True)
SketchConstraintCoincidence_114.setName("SketchConstraintCoincidence_121")
SketchConstraintCoincidence_115 = Sketch_7.setCoincident(SketchLine_128.endPoint(), SketchLine_129.startPoint())
SketchConstraintCoincidence_115.setName("SketchConstraintCoincidence_122")
-SketchLine_132 = Sketch_7.addLine(-153.5, -37.049990532747, -150.8, -37.04999053274745)
+SketchLine_132 = Sketch_7.addLine(-153.5, -37.05, -150.8, -37.05)
SketchLine_132.setName("SketchLine_133")
SketchLine_132.result().setName("SketchLine_133")
SketchLine_132.setAuxiliary(True)
SketchConstraintVertical_15 = Sketch_7.setVertical(SketchLine_129.result())
SketchConstraintHorizontal_19 = Sketch_7.setHorizontal(SketchLine_132.result())
SketchConstraintVertical_16 = Sketch_7.setVertical(SketchLine_131.result())
-SketchPoint_11 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_6/Vertex-SketchLine_70s-SketchLine_72s-SketchLine_71e"))
+SketchPoint_11 = Sketch_7.addPoint(model.selection("VERTEX", "Sketch_6/SketchLine_70_StartVertex"))
SketchPoint_11.setName("SketchPoint_13")
SketchPoint_11.result().setName("SketchPoint_13")
SketchConstraintCoincidence_118 = Sketch_7.setCoincident(SketchLine_132.endPoint(), SketchPoint_11.result())
SketchConstraintCoincidence_118.setName("SketchConstraintCoincidence_125")
-SketchArc_59 = Sketch_7.addArc(-152.3, -38.54999053274712, -150.8, -38.54999290880026, -152.3000099350335, -37.0499905327475, False)
+SketchArc_59 = Sketch_7.addArc(-152.3, -38.55, -150.8, -38.55, -152.3000099350335, -37.05, False)
SketchArc_59.setName("SketchArc_60")
SketchArc_59.result().setName("SketchArc_60")
SketchArc_59.results()[1].setName("SketchArc_60_2")
-SketchLine_133 = Sketch_7.addLine(-150.8, -38.54999290880026, -150.8, -45.049990532747)
+SketchLine_133 = Sketch_7.addLine(-150.8, -38.55, -150.8, -45.05)
SketchLine_133.setName("SketchLine_136")
SketchLine_133.result().setName("SketchLine_136")
SketchLine_133.setAuxiliary(True)
SketchConstraintCoincidence_123.setName("SketchConstraintCoincidence_130")
SketchConstraintCoincidence_124 = Sketch_7.setCoincident(SketchLine_133.startPoint(), SketchLine_131.result())
SketchConstraintCoincidence_124.setName("SketchConstraintCoincidence_131")
-SketchArc_60 = Sketch_7.addArc(-152.3, -43.54999053274783, -152.2999985784279, -45.04999053274759, -150.8, -43.54999111476925, False)
+SketchArc_60 = Sketch_7.addArc(-152.3, -43.55, -152.3, -45.05, -150.8, -43.55, False)
SketchArc_60.setName("SketchArc_61")
SketchArc_60.result().setName("SketchArc_61")
SketchArc_60.results()[1].setName("SketchArc_61_2")
Sketch_7.setName("Sketch_8")
Sketch_7.result().setName("Sketch_8")
ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_8")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_5_1")])
-ExtrusionCut_6.result().setName("ExtrusionCut_6_1")
-Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_6_1/Modfied_2"))
+Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_6_1/Modified_Face&Sketch_1/SketchLine_10"))
SketchLine_134 = Sketch_8.addLine(0.85, 50.75, -0.85, 50.75)
SketchLine_134.setName("SketchLine_139")
SketchLine_134.result().setName("SketchLine_139")
SketchConstraintCoincidence_137.setName("SketchConstraintCoincidence_143")
SketchConstraintCoincidence_138 = Sketch_8.setCoincident(SketchLine_135.startPoint(), SketchLine_137.endPoint())
SketchConstraintCoincidence_138.setName("SketchConstraintCoincidence_147")
-SketchConstraintMiddle_2 = Sketch_8.setMiddlePoint(SketchLine_136.result(), SketchArc_61.center())
+SketchConstraintCoincidence_152 = Sketch_8.setCoincident(SketchArc_61.center(), SketchLine_136.result())
SketchConstraintLength_10 = Sketch_8.setLength(SketchLine_134.result(), 1.7)
SketchConstraintLength_10.setName("SketchConstraintLength_11")
SketchConstraintVertical_17 = Sketch_8.setVertical(SketchLine_137.result())
SketchConstraintCoincidence_148.setName("SketchConstraintCoincidence_158")
SketchConstraintCoincidence_149 = Sketch_8.setCoincident(SketchArc_62.startPoint(), SketchLine_134.endPoint())
SketchConstraintCoincidence_149.setName("SketchConstraintCoincidence_159")
-SketchConstraintMiddle_4 = Sketch_8.setMiddlePoint(SketchLine_137.result(), SketchArc_62.center())
-SketchConstraintMiddle_4.setName("SketchConstraintMiddle_5")
-SketchLine_140 = Sketch_8.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_5&ExtrusionCut_6_1/Modfied_2"))
+SketchConstraintCoincidence_150 = Sketch_8.setCoincident(SketchArc_62.center(), SketchLine_137.result())
+SketchLine_140 = Sketch_8.addLine(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Sketch_1/SketchLine_1][ExtrusionCut_6_1/Modified_Face&Sketch_1/SketchLine_10]"))
SketchLine_140.setName("SketchLine_145")
SketchLine_140.result().setName("SketchLine_145")
SketchConstraintDistance_18 = Sketch_8.setDistance(SketchLine_140.result(), SketchPoint_12.coordinates(), 6)
SketchLine_141.setName("SketchLine_146")
SketchLine_141.result().setName("SketchLine_146")
SketchLine_141.setAuxiliary(True)
-SketchConstraintCoincidence_150 = Sketch_8.setCoincident(SketchPoint_12.coordinates(), SketchLine_141.startPoint())
-SketchConstraintCoincidence_150.setName("SketchConstraintCoincidence_160")
+SketchConstraintCoincidence_151 = Sketch_8.setCoincident(SketchPoint_12.coordinates(), SketchLine_141.startPoint())
+
SketchConstraintHorizontal_22 = Sketch_8.setHorizontal(SketchLine_141.result())
SketchConstraintLength_11 = Sketch_8.setLength(SketchLine_141.result(), 107.43)
SketchConstraintLength_11.setName("SketchConstraintLength_12")
model.do()
Sketch_8.setName("Sketch_9")
Sketch_8.result().setName("Sketch_9")
-ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchLine_147f-SketchLine_148f-SketchArc_64_2f-SketchArc_65_2f"), model.selection("FACE", "Sketch_9/Face-SketchLine_139f-SketchLine_141f-SketchArc_63_2f-SketchArc_62_2f"), model.selection("FACE", "Sketch_9/Face-SketchArc_66_2f-SketchArc_67_2f-SketchLine_149r-SketchLine_150r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_6_1")])
-ExtrusionCut_7.result().setName("ExtrusionCut_7_1")
+ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchLine_147f-SketchArc_65_2f-SketchLine_148f-SketchArc_64_2f"), model.selection("FACE", "Sketch_9/Face-SketchLine_139r-SketchArc_62_2f-SketchLine_141f-SketchArc_63_2f"), model.selection("FACE", "Sketch_9/Face-SketchArc_66_2f-SketchLine_150r-SketchArc_67_2f-SketchLine_149r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_6_1")])
model.do()
# Test reexecution after parameter change
model.testNbSubShapes(ExtrusionCut_7, GeomAPI_Shape.VERTEX, [1832])
model.testResultsVolumes(ExtrusionCut_7, [5345.689484659372283203992992640])
-assert(model.checkPythonDump)
+assert(model.checkPythonDump())
