Store information about user-defined names in the data model.

[modules/shaper.git] / test.models / clothespin.py

diff --git a/test.models/clothespin.py b/test.models/clothespin.py
index fa64ebb96b81543a1e9636c8ad3d0581784e1268..ce87a87cd7c0cf0f1bbedc60c44b1e45c5bf3437 100644 (file)
--- a/test.models/clothespin.py
+++ b/test.models/clothespin.py
@@ -147,7 +147,7 @@ SketchLine_14.result().setName("SketchLine_16")
 SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchArc_3.endPoint(), SketchLine_14.result())
 SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_24")
 SketchConstraintRadius_2 = Sketch_2.setRadius(SketchArc_3.results()[1], 6)
-SketchLine_15 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_13&Extrusion_1_1/Generated_Face_1"))
+SketchLine_15 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_13&Extrusion_1_1/Generated_Face_12"))
 SketchLine_15.setName("SketchLine_17")
 SketchLine_15.result().setName("SketchLine_17")
 SketchConstraintDistance_8 = Sketch_2.setDistance(SketchArc_3.startPoint(), SketchLine_15.result(), 6)
@@ -181,13 +181,12 @@ SketchConstraintCoincidence_26 = Sketch_2.setCoincident(SketchArc_3.endPoint(),
 SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_30")
 model.do()
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_3_2r-SketchLine_18r-SketchLine_19r-SketchLine_20r-SketchLine_21r-SketchLine_22r")], model.selection(), 7, 15, [model.selection("SOLID", "Extrusion_1_1")])
-ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
-Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"))
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_9"))
 SketchLine_21 = Sketch_3.addLine(28, -6, -4.270492394552598, -6.000000000000001)
 SketchLine_21.setName("SketchLine_23")
 SketchLine_21.result().setName("SketchLine_23")
 SketchLine_21.setAuxiliary(True)
-SketchLine_22 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_4"))
+SketchLine_22 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_9"))
 SketchLine_22.setName("SketchLine_24")
 SketchLine_22.result().setName("SketchLine_24")
 SketchConstraintCoincidence_27 = Sketch_3.setCoincident(SketchLine_21.startPoint(), SketchLine_22.result())
@@ -305,26 +304,26 @@ SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_55")
 SketchConstraintMiddle_2 = Sketch_3.setMiddlePoint(SketchLine_34.result(), SketchPoint_4.coordinates())
 SketchConstraintCoincidence_52 = Sketch_3.setCoincident(SketchPoint_4.coordinates(), SketchLine_21.result())
 SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_56")
-SketchLine_35 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&ExtrusionCut_1_1/Modfied_4"))
+SketchLine_35 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&ExtrusionCut_1_1/Modfied_3"))
 SketchLine_35.setName("SketchLine_37")
 SketchLine_35.result().setName("SketchLine_37")
 SketchConstraintCoincidence_53 = Sketch_3.setCoincident(SketchLine_25.startPoint(), SketchLine_35.result())
 SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_57")
 SketchConstraintLength_10 = Sketch_3.setLength(SketchLine_24.result(), 31)
 SketchConstraintLength_10.setName("SketchConstraintLength_11")
-SketchLine_36 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_8"))
+SketchLine_36 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_5"))
 SketchLine_36.setName("SketchLine_38")
 SketchLine_36.result().setName("SketchLine_38")
 SketchConstraintCoincidence_54 = Sketch_3.setCoincident(SketchLine_30.startPoint(), SketchLine_36.result())
 SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_58")
 SketchConstraintEqual_2 = Sketch_3.setEqual(SketchLine_30.result(), SketchLine_25.result())
 model.do()
-ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_3"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
+ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_1"))
 SketchLine_37 = Sketch_4.addLine(0.4324637622511017, 3.581086955422081, 1.55585595716119, 2.812450190483599)
 SketchLine_37.setName("SketchLine_39")
 SketchLine_37.result().setName("SketchLine_39")
-SketchLine_38 = Sketch_4.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_11"))
+SketchLine_38 = Sketch_4.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_2"))
 SketchLine_38.setName("SketchLine_40")
 SketchLine_38.result().setName("SketchLine_40")
 SketchConstraintCoincidence_55 = Sketch_4.setCoincident(SketchLine_37.startPoint(), SketchLine_38.result())
@@ -371,8 +370,7 @@ SketchLine_41.setName("SketchLine_43")
 SketchLine_41.result().setName("SketchLine_43")
 model.do()
 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_2"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
-ExtrusionCut_3.result().setName("ExtrusionCut_3_1")
-Plane_4 = model.addPlane(Part_1_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_12"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_9&ExtrusionCut_3_1/Modfied_3"))
+Plane_4 = model.addPlane(Part_1_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_1"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_9&ExtrusionCut_3_1/Modfied_3"))
 Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 SketchArc_4 = Sketch_5.addArc(25.00007393928819, -7.521062532210847, 22.00014787857639, -7.5, 28, -7.5, True)
 SketchPoint_5 = Sketch_5.addPoint(22.00014787857639, -7.5)
@@ -415,9 +413,7 @@ model.do()
 Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "ExtrusionCut_3_1/Modfied_3"), 6, True)
 Plane_6 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_2"), 3, True)
 ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_4_2f-SketchLine_52f-SketchLine_53f-SketchLine_54f")], model.selection(), 3, 0, [model.selection("SOLID", "ExtrusionCut_3_1")])
-ExtrusionCut_4.result().setName("ExtrusionCut_4_1")
 ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_4_2f-SketchLine_52f-SketchLine_53f-SketchLine_54f")], model.selection(), model.selection("FACE", "Plane_3"), 0, model.selection("FACE", "Plane_2"), 0, [model.selection("SOLID", "ExtrusionCut_4_1")])
-ExtrusionCut_5.result().setName("ExtrusionCut_5_1")
 Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_4_1/Modfied_6"))
 SketchArc_5 = Sketch_6.addArc(45.99999999999999, 0, 45.49999999999999, 8.91700958118717e-020, 46.49999999999999, 8.280962276646116e-019, False)
 SketchLine_53 = Sketch_6.addLine(0, 0, 54, 0)
@@ -469,7 +465,6 @@ SketchLine_56.setName("SketchLine_58")
 SketchLine_56.result().setName("SketchLine_58")
 model.do()
 ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_7f-SketchArc_1_2f-SketchLine_8f-SketchLine_9f-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_14r-SketchArc_2_2r"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_5_1")])
-ExtrusionFuse_1.result().setName("ExtrusionFuse_1_1")
 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_12"))
 SketchLine_64 = Sketch_7.addLine(50.25000000000001, -4.5, 31.24999999998802, -4.499999999999997)
 SketchLine_64.setName("SketchLine_76")
@@ -641,7 +636,6 @@ SketchConstraintRadius_7 = Sketch_7.setRadius(SketchArc_15.results()[1], 0.25)
 SketchConstraintRadius_8 = Sketch_7.setRadius(SketchArc_17.results()[1], 0.25)
 model.do()
 ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection(), 0, 20, [model.selection("SOLID", "ExtrusionFuse_1_1")])
-ExtrusionCut_6.result().setName("ExtrusionCut_6_1")
 Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_6_1/Modfied_17"))
 SketchPoint_12 = Sketch_8.addPoint(53.99994409538203, -1.615587133892632e-027)
 SketchPoint_13 = Sketch_8.addPoint(53.99994409538203, -1.615587133892632e-027)
@@ -790,7 +784,6 @@ SketchConstraintCoincidence_141 = Sketch_8.setCoincident(SketchPoint_21.coordina
 SketchConstraintCoincidence_141.setName("SketchConstraintCoincidence_145")
 model.do()
 ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_8")], model.selection(), 10, 0, [model.selection("SOLID", "ExtrusionCut_6_1")])
-ExtrusionCut_7.result().setName("ExtrusionCut_7_1")
 Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_7_1/Modfied_56"))
 SketchLine_94 = Sketch_9.addLine(21.00014787857639, 4.163450069699051, 21.00014787857639, 0)
 SketchLine_94.setName("SketchLine_107")
@@ -934,7 +927,6 @@ model.do()
 Plane_7 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_2"), 4, False)
 Plane_8 = model.addPlane(Part_1_doc, model.selection("FACE", "Plane_2"), 4, True)
 ExtrusionCut_8 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection(), model.selection("FACE", "Plane_5"), 0, model.selection("FACE", "Plane_4"), 0, [model.selection("SOLID", "ExtrusionCut_7_1")])
-ExtrusionCut_8.result().setName("ExtrusionCut_8_1")
 Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_8_1/Modfied_5"))
 SketchCircle_1 = Sketch_10.addCircle(12, 6, 1)
 SketchConstraintRadius_11 = Sketch_10.setRadius(SketchCircle_1.results()[1], 1)
@@ -961,7 +953,6 @@ SketchConstraintCoincidence_173.setName("SketchConstraintCoincidence_178")
 SketchConstraintDistance_17 = Sketch_10.setDistance(SketchLine_105.result(), SketchCircle_1.center(), 12)
 model.do()
 ExtrusionCut_9 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_10/Wire-SketchCircle_1_2f")], model.selection(), 0, 0.75, [model.selection("SOLID", "ExtrusionCut_8_1")])
-ExtrusionCut_9.result().setName("ExtrusionCut_9_1")
 model.do()
 Part_2 = model.addPart(partSet)
 Part_2_doc = Part_2.document()
@@ -1087,7 +1078,7 @@ SketchLine_120.result().setName("SketchLine_16")
 SketchConstraintCoincidence_193 = Sketch_12.setCoincident(SketchArc_26.endPoint(), SketchLine_120.result())
 SketchConstraintCoincidence_193.setName("SketchConstraintCoincidence_24")
 SketchConstraintRadius_13 = Sketch_12.setRadius(SketchArc_26.results()[1], 6)
-SketchLine_121 = Sketch_12.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_13&Extrusion_1_1/Generated_Face_1"))
+SketchLine_121 = Sketch_12.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_13&Extrusion_1_1/Generated_Face_12"))
 SketchLine_121.setName("SketchLine_17")
 SketchLine_121.result().setName("SketchLine_17")
 SketchConstraintDistance_25 = Sketch_12.setDistance(SketchArc_26.startPoint(), SketchLine_121.result(), 6)
@@ -1121,13 +1112,12 @@ SketchConstraintCoincidence_199 = Sketch_12.setCoincident(SketchArc_26.endPoint(
 SketchConstraintCoincidence_199.setName("SketchConstraintCoincidence_30")
 model.do()
 ExtrusionCut_10 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_3_2r-SketchLine_18r-SketchLine_19r-SketchLine_20r-SketchLine_21r-SketchLine_22r")], model.selection(), 7, 15, [model.selection("SOLID", "Extrusion_1_1")])
-ExtrusionCut_10.result().setName("ExtrusionCut_1_1")
-Sketch_13 = model.addSketch(Part_2_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"))
+Sketch_13 = model.addSketch(Part_2_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_9"))
 SketchLine_127 = Sketch_13.addLine(28, -6, -4.270492394552598, -6.000000000000001)
 SketchLine_127.setName("SketchLine_23")
 SketchLine_127.result().setName("SketchLine_23")
 SketchLine_127.setAuxiliary(True)
-SketchLine_128 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_4"))
+SketchLine_128 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_9"))
 SketchLine_128.setName("SketchLine_24")
 SketchLine_128.result().setName("SketchLine_24")
 SketchConstraintCoincidence_200 = Sketch_13.setCoincident(SketchLine_127.startPoint(), SketchLine_128.result())
@@ -1245,26 +1235,26 @@ SketchConstraintCoincidence_224.setName("SketchConstraintCoincidence_55")
 SketchConstraintMiddle_10 = Sketch_13.setMiddlePoint(SketchLine_140.result(), SketchPoint_28.coordinates())
 SketchConstraintCoincidence_225 = Sketch_13.setCoincident(SketchPoint_28.coordinates(), SketchLine_127.result())
 SketchConstraintCoincidence_225.setName("SketchConstraintCoincidence_56")
-SketchLine_141 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&ExtrusionCut_1_1/Modfied_4"))
+SketchLine_141 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&ExtrusionCut_1_1/Modfied_3"))
 SketchLine_141.setName("SketchLine_37")
 SketchLine_141.result().setName("SketchLine_37")
 SketchConstraintCoincidence_226 = Sketch_13.setCoincident(SketchLine_131.startPoint(), SketchLine_141.result())
 SketchConstraintCoincidence_226.setName("SketchConstraintCoincidence_57")
 SketchConstraintLength_27 = Sketch_13.setLength(SketchLine_130.result(), 31)
 SketchConstraintLength_27.setName("SketchConstraintLength_11")
-SketchLine_142 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_8"))
+SketchLine_142 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_5"))
 SketchLine_142.setName("SketchLine_38")
 SketchLine_142.result().setName("SketchLine_38")
 SketchConstraintCoincidence_227 = Sketch_13.setCoincident(SketchLine_136.startPoint(), SketchLine_142.result())
 SketchConstraintCoincidence_227.setName("SketchConstraintCoincidence_58")
 SketchConstraintEqual_5 = Sketch_13.setEqual(SketchLine_136.result(), SketchLine_131.result())
 model.do()
-ExtrusionCut_11 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_3"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
+ExtrusionCut_11 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
 Sketch_14 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_1"))
 SketchLine_143 = Sketch_14.addLine(0.4324637622511017, 3.581086955422081, 1.55585595716119, 2.812450190483599)
 SketchLine_143.setName("SketchLine_39")
 SketchLine_143.result().setName("SketchLine_39")
-SketchLine_144 = Sketch_14.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_11"))
+SketchLine_144 = Sketch_14.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_2"))
 SketchLine_144.setName("SketchLine_40")
 SketchLine_144.result().setName("SketchLine_40")
 SketchConstraintCoincidence_228 = Sketch_14.setCoincident(SketchLine_143.startPoint(), SketchLine_144.result())
@@ -1311,8 +1301,7 @@ SketchLine_147.setName("SketchLine_43")
 SketchLine_147.result().setName("SketchLine_43")
 model.do()
 ExtrusionCut_12 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_2"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
-ExtrusionCut_12.result().setName("ExtrusionCut_3_1")
-Plane_9 = model.addPlane(Part_2_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_12"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_9&ExtrusionCut_3_1/Modfied_3"))
+Plane_9 = model.addPlane(Part_2_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_1"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_9&ExtrusionCut_3_1/Modfied_3"))
 Sketch_15 = model.addSketch(Part_2_doc, model.selection("FACE", "Plane_1"))
 SketchArc_27 = Sketch_15.addArc(25.00007393928819, -7.521062532210847, 22.00014787857639, -7.5, 28, -7.5, True)
 SketchPoint_29 = Sketch_15.addPoint(22.00014787857639, -7.5)
@@ -1355,9 +1344,7 @@ model.do()
 Plane_10 = model.addPlane(Part_2_doc, model.selection("FACE", "ExtrusionCut_3_1/Modfied_3"), 6, True)
 Plane_11 = model.addPlane(Part_2_doc, model.selection("FACE", "Plane_2"), 3, True)
 ExtrusionCut_13 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_4_2f-SketchLine_52f-SketchLine_53f-SketchLine_54f")], model.selection(), 3, 0, [model.selection("SOLID", "ExtrusionCut_3_1")])
-ExtrusionCut_13.result().setName("ExtrusionCut_4_1")
 ExtrusionCut_14 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_4_2f-SketchLine_52f-SketchLine_53f-SketchLine_54f")], model.selection(), model.selection("FACE", "Plane_3"), 0, model.selection("FACE", "Plane_2"), 0, [model.selection("SOLID", "ExtrusionCut_4_1")])
-ExtrusionCut_14.result().setName("ExtrusionCut_5_1")
 Sketch_16 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_4_1/Modfied_6"))
 SketchArc_28 = Sketch_16.addArc(45.99999999999999, 0, 45.49999999999999, 8.91700958118717e-020, 46.49999999999999, 8.280962276646116e-019, False)
 SketchLine_159 = Sketch_16.addLine(0, 0, 54, 0)
@@ -1409,7 +1396,6 @@ SketchLine_162.setName("SketchLine_58")
 SketchLine_162.result().setName("SketchLine_58")
 model.do()
 ExtrusionFuse_2 = model.addExtrusionFuse(Part_2_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_7f-SketchArc_1_2f-SketchLine_8f-SketchLine_9f-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_14r-SketchArc_2_2r"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_5_1")])
-ExtrusionFuse_2.result().setName("ExtrusionFuse_1_1")
 Sketch_17 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_12"))
 SketchLine_170 = Sketch_17.addLine(50.25000000000001, -4.5, 31.24999999998802, -4.499999999999997)
 SketchLine_170.setName("SketchLine_76")
@@ -1581,7 +1567,6 @@ SketchConstraintRadius_18 = Sketch_17.setRadius(SketchArc_38.results()[1], 0.25)
 SketchConstraintRadius_19 = Sketch_17.setRadius(SketchArc_40.results()[1], 0.25)
 model.do()
 ExtrusionCut_15 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection(), 0, 20, [model.selection("SOLID", "ExtrusionFuse_1_1")])
-ExtrusionCut_15.result().setName("ExtrusionCut_6_1")
 Sketch_18 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_6_1/Modfied_17"))
 SketchPoint_36 = Sketch_18.addPoint(53.99994409538203, -1.615587133892632e-027)
 SketchPoint_37 = Sketch_18.addPoint(53.99994409538203, -1.615587133892632e-027)
@@ -1730,7 +1715,6 @@ SketchConstraintCoincidence_314 = Sketch_18.setCoincident(SketchPoint_45.coordin
 SketchConstraintCoincidence_314.setName("SketchConstraintCoincidence_145")
 model.do()
 ExtrusionCut_16 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_8")], model.selection(), 10, 0, [model.selection("SOLID", "ExtrusionCut_6_1")])
-ExtrusionCut_16.result().setName("ExtrusionCut_7_1")
 Sketch_19 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_7_1/Modfied_56"))
 SketchLine_200 = Sketch_19.addLine(21.00014787857639, 4.163450069699051, 21.00014787857639, 0)
 SketchLine_200.setName("SketchLine_107")
@@ -1874,7 +1858,6 @@ model.do()
 Plane_12 = model.addPlane(Part_2_doc, model.selection("FACE", "Plane_2"), 4, False)
 Plane_13 = model.addPlane(Part_2_doc, model.selection("FACE", "Plane_2"), 4, True)
 ExtrusionCut_17 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection(), model.selection("FACE", "Plane_5"), 0, model.selection("FACE", "Plane_4"), 0, [model.selection("SOLID", "ExtrusionCut_7_1")])
-ExtrusionCut_17.result().setName("ExtrusionCut_8_1")
 Sketch_20 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_8_1/Modfied_5"))
 SketchCircle_2 = Sketch_20.addCircle(12, 6, 1)
 SketchConstraintRadius_22 = Sketch_20.setRadius(SketchCircle_2.results()[1], 1)
@@ -1901,7 +1884,6 @@ SketchConstraintCoincidence_346.setName("SketchConstraintCoincidence_178")
 SketchConstraintDistance_34 = Sketch_20.setDistance(SketchLine_211.result(), SketchCircle_2.center(), 12)
 model.do()
 ExtrusionCut_18 = model.addExtrusionCut(Part_2_doc, [model.selection("WIRE", "Sketch_10/Wire-SketchCircle_1_2f")], model.selection(), 0, 0.75, [model.selection("SOLID", "ExtrusionCut_8_1")])
-ExtrusionCut_18.result().setName("ExtrusionCut_9_1")
 model.do()
 Rotation_1 = model.addRotation(partSet, [model.selection("COMPOUND", "Part_2/")], model.selection("EDGE", "Part_1/ExtrusionCut_9_1/Modfied_1&ExtrusionCut_7_1/Modfied_57"), 180)
 Placement_1 = model.addPlacement(partSet, [model.selection("COMPOUND", "Rotation_1/")], model.selection("FACE", "Rotation_1/ExtrusionCut_5_1/Modfied_1"), model.selection("FACE", "Part_1/ExtrusionCut_5_1/Modfied_1"), False, True)