+## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
from salome.shaper import model
model.begin()
SketchConstraintCoincidence_20 = Sketch_2.setCoincident(SketchArc_3.endPoint(), SketchLine_14.result())
SketchConstraintCoincidence_20.setName("SketchConstraintCoincidence_24")
SketchConstraintRadius_2 = Sketch_2.setRadius(SketchArc_3.results()[1], 6)
-SketchLine_15 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_13&Extrusion_1_1/Generated_Face_1"))
+SketchLine_15 = Sketch_2.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_13&Extrusion_1_1/Generated_Face_12"))
SketchLine_15.setName("SketchLine_17")
SketchLine_15.result().setName("SketchLine_17")
SketchConstraintDistance_8 = Sketch_2.setDistance(SketchArc_3.startPoint(), SketchLine_15.result(), 6)
SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_30")
model.do()
ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_3_2r-SketchLine_18r-SketchLine_19r-SketchLine_20r-SketchLine_21r-SketchLine_22r")], model.selection(), 7, 15, [model.selection("SOLID", "Extrusion_1_1")])
-Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"))
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_9"))
SketchLine_21 = Sketch_3.addLine(28, -6, -4.270492394552598, -6.000000000000001)
SketchLine_21.setName("SketchLine_23")
SketchLine_21.result().setName("SketchLine_23")
SketchLine_21.setAuxiliary(True)
-SketchLine_22 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_4"))
+SketchLine_22 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_9"))
SketchLine_22.setName("SketchLine_24")
SketchLine_22.result().setName("SketchLine_24")
SketchConstraintCoincidence_27 = Sketch_3.setCoincident(SketchLine_21.startPoint(), SketchLine_22.result())
SketchConstraintMiddle_2 = Sketch_3.setMiddlePoint(SketchLine_34.result(), SketchPoint_4.coordinates())
SketchConstraintCoincidence_52 = Sketch_3.setCoincident(SketchPoint_4.coordinates(), SketchLine_21.result())
SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_56")
-SketchLine_35 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&ExtrusionCut_1_1/Modfied_4"))
+SketchLine_35 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&ExtrusionCut_1_1/Modfied_3"))
SketchLine_35.setName("SketchLine_37")
SketchLine_35.result().setName("SketchLine_37")
SketchConstraintCoincidence_53 = Sketch_3.setCoincident(SketchLine_25.startPoint(), SketchLine_35.result())
SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_57")
SketchConstraintLength_10 = Sketch_3.setLength(SketchLine_24.result(), 31)
SketchConstraintLength_10.setName("SketchConstraintLength_11")
-SketchLine_36 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_8"))
+SketchLine_36 = Sketch_3.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_5"))
SketchLine_36.setName("SketchLine_38")
SketchLine_36.result().setName("SketchLine_38")
SketchConstraintCoincidence_54 = Sketch_3.setCoincident(SketchLine_30.startPoint(), SketchLine_36.result())
SketchConstraintCoincidence_54.setName("SketchConstraintCoincidence_58")
SketchConstraintEqual_2 = Sketch_3.setEqual(SketchLine_30.result(), SketchLine_25.result())
model.do()
-ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_3"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
+ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_1"))
SketchLine_37 = Sketch_4.addLine(0.4324637622511017, 3.581086955422081, 1.55585595716119, 2.812450190483599)
SketchLine_37.setName("SketchLine_39")
SketchLine_37.result().setName("SketchLine_39")
-SketchLine_38 = Sketch_4.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_11"))
+SketchLine_38 = Sketch_4.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_2"))
SketchLine_38.setName("SketchLine_40")
SketchLine_38.result().setName("SketchLine_40")
SketchConstraintCoincidence_55 = Sketch_4.setCoincident(SketchLine_37.startPoint(), SketchLine_38.result())
SketchLine_41.result().setName("SketchLine_43")
model.do()
ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_2"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
-Plane_4 = model.addPlane(Part_1_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_12"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_9&ExtrusionCut_3_1/Modfied_3"))
+Plane_4 = model.addPlane(Part_1_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_1"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_6&ExtrusionCut_3_1/Modfied_3"))
Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
SketchArc_4 = Sketch_5.addArc(25.00007393928819, -7.521062532210847, 22.00014787857639, -7.5, 28, -7.5, True)
SketchPoint_5 = Sketch_5.addPoint(22.00014787857639, -7.5)
SketchLine_56.result().setName("SketchLine_58")
model.do()
ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_7f-SketchArc_1_2f-SketchLine_8f-SketchLine_9f-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_14r-SketchArc_2_2r"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_5_1")])
-Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_12"))
+Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_9"))
SketchLine_64 = Sketch_7.addLine(50.25000000000001, -4.5, 31.24999999998802, -4.499999999999997)
SketchLine_64.setName("SketchLine_76")
SketchLine_64.result().setName("SketchLine_76")
SketchConstraintRadius_8 = Sketch_7.setRadius(SketchArc_17.results()[1], 0.25)
model.do()
ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection(), 0, 20, [model.selection("SOLID", "ExtrusionFuse_1_1")])
-Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_6_1/Modfied_17"))
+Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_6_1/Modfied_10"))
SketchPoint_12 = Sketch_8.addPoint(53.99994409538203, -1.615587133892632e-027)
SketchPoint_13 = Sketch_8.addPoint(53.99994409538203, -1.615587133892632e-027)
SketchConstraintRigid_7 = Sketch_8.setFixed(SketchPoint_13.result())
SketchConstraintCoincidence_141.setName("SketchConstraintCoincidence_145")
model.do()
ExtrusionCut_7 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_8")], model.selection(), 10, 0, [model.selection("SOLID", "ExtrusionCut_6_1")])
-Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_7_1/Modfied_56"))
+Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_7_1/Modfied_32"))
SketchLine_94 = Sketch_9.addLine(21.00014787857639, 4.163450069699051, 21.00014787857639, 0)
SketchLine_94.setName("SketchLine_107")
SketchLine_94.result().setName("SketchLine_107")
SketchConstraintCoincidence_193 = Sketch_12.setCoincident(SketchArc_26.endPoint(), SketchLine_120.result())
SketchConstraintCoincidence_193.setName("SketchConstraintCoincidence_24")
SketchConstraintRadius_13 = Sketch_12.setRadius(SketchArc_26.results()[1], 6)
-SketchLine_121 = Sketch_12.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_13&Extrusion_1_1/Generated_Face_1"))
+SketchLine_121 = Sketch_12.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_13&Extrusion_1_1/Generated_Face_12"))
SketchLine_121.setName("SketchLine_17")
SketchLine_121.result().setName("SketchLine_17")
SketchConstraintDistance_25 = Sketch_12.setDistance(SketchArc_26.startPoint(), SketchLine_121.result(), 6)
SketchConstraintCoincidence_199.setName("SketchConstraintCoincidence_30")
model.do()
ExtrusionCut_10 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_2/Face-SketchArc_3_2r-SketchLine_18r-SketchLine_19r-SketchLine_20r-SketchLine_21r-SketchLine_22r")], model.selection(), 7, 15, [model.selection("SOLID", "Extrusion_1_1")])
-Sketch_13 = model.addSketch(Part_2_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"))
+Sketch_13 = model.addSketch(Part_2_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_9"))
SketchLine_127 = Sketch_13.addLine(28, -6, -4.270492394552598, -6.000000000000001)
SketchLine_127.setName("SketchLine_23")
SketchLine_127.result().setName("SketchLine_23")
SketchLine_127.setAuxiliary(True)
-SketchLine_128 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_5&Extrusion_1_1/Generated_Face_4"))
+SketchLine_128 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_8&Extrusion_1_1/Generated_Face_9"))
SketchLine_128.setName("SketchLine_24")
SketchLine_128.result().setName("SketchLine_24")
SketchConstraintCoincidence_200 = Sketch_13.setCoincident(SketchLine_127.startPoint(), SketchLine_128.result())
SketchConstraintMiddle_10 = Sketch_13.setMiddlePoint(SketchLine_140.result(), SketchPoint_28.coordinates())
SketchConstraintCoincidence_225 = Sketch_13.setCoincident(SketchPoint_28.coordinates(), SketchLine_127.result())
SketchConstraintCoincidence_225.setName("SketchConstraintCoincidence_56")
-SketchLine_141 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&ExtrusionCut_1_1/Modfied_4"))
+SketchLine_141 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&ExtrusionCut_1_1/Modfied_3"))
SketchLine_141.setName("SketchLine_37")
SketchLine_141.result().setName("SketchLine_37")
SketchConstraintCoincidence_226 = Sketch_13.setCoincident(SketchLine_131.startPoint(), SketchLine_141.result())
SketchConstraintCoincidence_226.setName("SketchConstraintCoincidence_57")
SketchConstraintLength_27 = Sketch_13.setLength(SketchLine_130.result(), 31)
SketchConstraintLength_27.setName("SketchConstraintLength_11")
-SketchLine_142 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_9&Extrusion_1_1/Generated_Face_8"))
+SketchLine_142 = Sketch_13.addLine(model.selection("EDGE", "Extrusion_1_1/Generated_Face_4&Extrusion_1_1/Generated_Face_5"))
SketchLine_142.setName("SketchLine_38")
SketchLine_142.result().setName("SketchLine_38")
SketchConstraintCoincidence_227 = Sketch_13.setCoincident(SketchLine_136.startPoint(), SketchLine_142.result())
SketchConstraintCoincidence_227.setName("SketchConstraintCoincidence_58")
SketchConstraintEqual_5 = Sketch_13.setEqual(SketchLine_136.result(), SketchLine_131.result())
model.do()
-ExtrusionCut_11 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_3"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
+ExtrusionCut_11 = model.addExtrusionCut(Part_2_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_32f-SketchLine_33f-SketchLine_34f-SketchLine_35f"), model.selection("FACE", "Sketch_3/Face-SketchLine_26f-SketchLine_27f-SketchLine_28f-SketchLine_29f")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
Sketch_14 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_1"))
SketchLine_143 = Sketch_14.addLine(0.4324637622511017, 3.581086955422081, 1.55585595716119, 2.812450190483599)
SketchLine_143.setName("SketchLine_39")
SketchLine_143.result().setName("SketchLine_39")
-SketchLine_144 = Sketch_14.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_11"))
+SketchLine_144 = Sketch_14.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&Extrusion_1_1/Generated_Face_2"))
SketchLine_144.setName("SketchLine_40")
SketchLine_144.result().setName("SketchLine_40")
SketchConstraintCoincidence_228 = Sketch_14.setCoincident(SketchLine_143.startPoint(), SketchLine_144.result())
SketchLine_147.result().setName("SketchLine_43")
model.do()
ExtrusionCut_12 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), model.selection("FACE", "ExtrusionCut_1_1/Modfied_2"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
-Plane_9 = model.addPlane(Part_2_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_12"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_9&ExtrusionCut_3_1/Modfied_3"))
+Plane_9 = model.addPlane(Part_2_doc, model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_1"), model.selection("VERTEX", "ExtrusionCut_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7&Extrusion_1_1/Generated_Face_6"), model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_5&ExtrusionCut_2_1/Modfied_6&ExtrusionCut_3_1/Modfied_3"))
Sketch_15 = model.addSketch(Part_2_doc, model.selection("FACE", "Plane_1"))
SketchArc_27 = Sketch_15.addArc(25.00007393928819, -7.521062532210847, 22.00014787857639, -7.5, 28, -7.5, True)
SketchPoint_29 = Sketch_15.addPoint(22.00014787857639, -7.5)
SketchLine_162.result().setName("SketchLine_58")
model.do()
ExtrusionFuse_2 = model.addExtrusionFuse(Part_2_doc, [model.selection("COMPOUND", "Sketch_6")], model.selection(), model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_7f-SketchArc_1_2f-SketchLine_8f-SketchLine_9f-SketchLine_10r-SketchLine_11r-SketchLine_12r-SketchLine_14r-SketchArc_2_2r"), 0, model.selection(), 0, [model.selection("SOLID", "ExtrusionCut_5_1")])
-Sketch_17 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_12"))
+Sketch_17 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_2_1/Modfied_9"))
SketchLine_170 = Sketch_17.addLine(50.25000000000001, -4.5, 31.24999999998802, -4.499999999999997)
SketchLine_170.setName("SketchLine_76")
SketchLine_170.result().setName("SketchLine_76")
SketchConstraintRadius_19 = Sketch_17.setRadius(SketchArc_40.results()[1], 0.25)
model.do()
ExtrusionCut_15 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection(), 0, 20, [model.selection("SOLID", "ExtrusionFuse_1_1")])
-Sketch_18 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_6_1/Modfied_17"))
+Sketch_18 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_6_1/Modfied_10"))
SketchPoint_36 = Sketch_18.addPoint(53.99994409538203, -1.615587133892632e-027)
SketchPoint_37 = Sketch_18.addPoint(53.99994409538203, -1.615587133892632e-027)
SketchConstraintRigid_20 = Sketch_18.setFixed(SketchPoint_37.result())
SketchConstraintCoincidence_314.setName("SketchConstraintCoincidence_145")
model.do()
ExtrusionCut_16 = model.addExtrusionCut(Part_2_doc, [model.selection("COMPOUND", "Sketch_8")], model.selection(), 10, 0, [model.selection("SOLID", "ExtrusionCut_6_1")])
-Sketch_19 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_7_1/Modfied_56"))
+Sketch_19 = model.addSketch(Part_2_doc, model.selection("FACE", "ExtrusionCut_7_1/Modfied_32"))
SketchLine_200 = Sketch_19.addLine(21.00014787857639, 4.163450069699051, 21.00014787857639, 0)
SketchLine_200.setName("SketchLine_107")
SketchLine_200.result().setName("SketchLine_107")
model.do()
ExtrusionCut_18 = model.addExtrusionCut(Part_2_doc, [model.selection("WIRE", "Sketch_10/Wire-SketchCircle_1_2f")], model.selection(), 0, 0.75, [model.selection("SOLID", "ExtrusionCut_8_1")])
model.do()
-Rotation_1 = model.addRotation(partSet, [model.selection("COMPOUND", "Part_2/")], model.selection("EDGE", "Part_1/ExtrusionCut_9_1/Modfied_1&ExtrusionCut_7_1/Modfied_57"), 180)
+Rotation_1 = model.addRotation(partSet, [model.selection("COMPOUND", "Part_2/")], model.selection("EDGE", "Part_1/ExtrusionCut_9_1/Modfied_1&ExtrusionCut_7_1/Modfied_33"), 180)
Placement_1 = model.addPlacement(partSet, [model.selection("COMPOUND", "Rotation_1/")], model.selection("FACE", "Rotation_1/ExtrusionCut_5_1/Modfied_1"), model.selection("FACE", "Part_1/ExtrusionCut_5_1/Modfied_1"), False, True)
-Rotation_2 = model.addRotation(partSet, [model.selection("COMPOUND", "Placement_1/")], model.selection("EDGE", "Part_1/ExtrusionCut_5_1/Modfied_8&ExtrusionCut_8_1/Modfied_3"), 7)
+Rotation_2 = model.addRotation(partSet, [model.selection("COMPOUND", "Placement_1/")], model.selection("EDGE", "Part_1/ExtrusionCut_5_1/Modfied_5&ExtrusionCut_8_1/Modfied_3"), 7)
Rotation_2.result().setColor(255, 85, 0)
model.end()
