Adapting exportToGEOM tests to selection changes since 2.9.1.

[modules/shaper.git] / test.models / bracket32.py

diff --git a/test.models/bracket32.py b/test.models/bracket32.py
index d0a766288f27fad3f79a6f131e979286afdbbbf2..3690c9d3b03974561cbb10fc7d30863bc1d36bcb 100644 (file)
--- a/test.models/bracket32.py
+++ b/test.models/bracket32.py
@@ -1,3 +1,23 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
 from salome.shaper import model
 
 model.begin()
@@ -391,8 +411,11 @@ SketchConstraintRadius_10.setName("SketchConstraintRadius_4")
 model.do()
 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_1")], model.selection(), "TL/2-3", "TL/2-3")
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_2")], model.selection(), 100, 100, [model.selection("SOLID", "Extrusion_1_1")])
+ExtrusionCut_1.result().setName("ExtrusionCut_1_1")
 ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), "TL/2", "TL/2", [model.selection("SOLID", "ExtrusionCut_1_1")])
+ExtrusionFuse_1.result().setName("ExtrusionFuse_1_1")
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 60, 60, [model.selection("SOLID", "ExtrusionFuse_1_1")])
+ExtrusionCut_2.result().setName("ExtrusionCut_2_1")
 Sketch_5 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
 SketchCircle_5 = Sketch_5.addCircle(30, -41, 7.5)
 SketchLine_37 = Sketch_5.addLine(model.selection("EDGE", "PartSet/OX"))
@@ -519,6 +542,7 @@ SketchConstraintRadius_13 = Sketch_7.setRadius(SketchArc_7.results()[1], "BHPFR"
 SketchConstraintRadius_13.setName("SketchConstraintRadius_8")
 model.do()
 RevolutionFuse_1 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_7")], model.selection("EDGE", "Sketch_7/Edge-SketchLine_41"), 360, 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
+RevolutionFuse_1.result().setName("RevolutionFuse_1_1")
 Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 SketchLine_49 = Sketch_8.addLine(32, 6, 32.50001476412091, 6.000000000000001)
 SketchLine_49.setName("SketchLine_55")
@@ -615,6 +639,7 @@ SketchConstraintRadius_14 = Sketch_8.setRadius(SketchArc_8.results()[1], 1.5)
 SketchConstraintRadius_14.setName("SketchConstraintRadius_9")
 model.do()
 RevolutionFuse_2 = model.addRevolutionFuse(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_55r-SketchLine_49f-SketchLine_50f-SketchLine_56r-SketchLine_52f-SketchLine_53f-SketchArc_7_2r")], model.selection("EDGE", "Sketch_8/Edge-SketchLine_50"), 360, 0, [model.selection("SOLID", "RevolutionFuse_1_1")])
+RevolutionFuse_2.result().setName("RevolutionFuse_2_1")
 Plane_5 = model.addPlane(Part_1_doc, model.selection("FACE", "PartSet/YOZ"), 30, True)
 Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_2"))
 SketchLine_57 = Sketch_9.addLine(-32.50001494742042, 5.999999999999998, -32, 6)
@@ -807,7 +832,9 @@ SketchConstraintRadius_16 = Sketch_10.setRadius(SketchArc_10.results()[1], 1.5)
 SketchConstraintRadius_16.setName("SketchConstraintRadius_11")
 model.do()
 RevolutionFuse_3 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_9")], model.selection("EDGE", "Sketch_9/Edge-SketchLine_58"), 360, 0, [model.selection("SOLID", "RevolutionFuse_2_1")])
+RevolutionFuse_3.result().setName("RevolutionFuse_3_1")
 RevolutionFuse_4 = model.addRevolutionFuse(Part_1_doc, [model.selection("COMPOUND", "Sketch_10")], model.selection("EDGE", "Sketch_10/Edge-SketchLine_66"), 360, 0, [model.selection("SOLID", "RevolutionFuse_3_1")])
+RevolutionFuse_4.result().setName("RevolutionFuse_4_1")
 ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchCircle_11_2f"), model.selection("FACE", "Sketch_6/Face-SketchCircle_9_2f"), model.selection("WIRE", "Sketch_6/Wire-SketchCircle_10_2f"), model.selection("FACE", "Sketch_6/Face-SketchCircle_12_2f")], model.selection("EDGE", "PartSet/OZ"), "BPS+5", 5, [model.selection("SOLID", "RevolutionFuse_4_1")])
 
 # Test reexecution after parameter change