Tests adjustment.

[modules/shaper.git] / test.models / bearing_puller.py

diff --git a/test.models/bearing_puller.py b/test.models/bearing_puller.py
index f90ca93e2bd959e53aa33380d09a1e286d04338c..c6e7f6c47e2c0f797a5877a3cfbc95f308b0e9d1 100644 (file)
--- a/test.models/bearing_puller.py
+++ b/test.models/bearing_puller.py
@@ -228,9 +228,9 @@ SketchConstraintDistance_9 = Sketch_2.setDistance(SketchArc_9.center(), SketchPo
 SketchConstraintDistance_9.setName("SketchConstraintDistance_8")
 model.do()
 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchLine_10r-SketchLine_11r-SketchArc_3_2f-SketchArc_4_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_14r-SketchArc_7_2f-SketchLine_15r-SketchArc_8_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_12r-SketchArc_5_2f-SketchLine_13r-SketchArc_6_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_19f-SketchLine_20f-SketchLine_21f-SketchArc_10_2f"), model.selection("FACE", "Sketch_2/Face-SketchLine_16f-SketchLine_17f-SketchLine_18f-SketchArc_9_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchArc_11_2f")], model.selection(), model.selection(), 10, model.selection("FACE", "Revolution_1_1/Generated_Face_5"), 10)
-Boolean_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_4"), model.selection("SOLID", "Extrusion_1_5")])
-Boolean_2 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Extrusion_1_2"), model.selection("SOLID", "Extrusion_1_3"), model.selection("SOLID", "Extrusion_1_6")])
-Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Boolean_2_1/Modified_Face_7"), model.selection("FACE", "Boolean_2_1/Modified_Face_9"))
+Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Revolution_1_1")], [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_4"), model.selection("SOLID", "Extrusion_1_5")])
+Cut_2 = model.addCut(Part_1_doc, [model.selection("SOLID", "Cut_1_1")], [model.selection("SOLID", "Extrusion_1_2"), model.selection("SOLID", "Extrusion_1_3"), model.selection("SOLID", "Extrusion_1_6")])
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Cut_2_1/Modified_Face_7"), model.selection("FACE", "Cut_2_1/Modified_Face_9"))
 Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 SketchCircle_3 = Sketch_3.addCircle(25, -10, 4)
 SketchCircle_4 = Sketch_3.addCircle(40, -10, 4)
@@ -243,7 +243,7 @@ SketchConstraintDistance_10 = Sketch_3.setDistance(SketchCircle_3.center(), Sket
 SketchConstraintDistance_10.setName("SketchConstraintDistance_9")
 SketchConstraintDistance_11 = Sketch_3.setDistance(SketchCircle_4.center(), SketchLine_28.result(), 40)
 SketchConstraintDistance_11.setName("SketchConstraintDistance_10")
-SketchProjection_1 = Sketch_3.addProjection(model.selection("EDGE", "Boolean_2_1/Modified_Face_23&Boolean_2_1/Modified_Face_7"))
+SketchProjection_1 = Sketch_3.addProjection(model.selection("EDGE", "Cut_2_1/Modified_Face_17&Cut_2_1/Modified_Face_7"))
 SketchLine_29 = SketchProjection_1.createdFeature()
 SketchLine_29.setName("SketchLine_26")
 SketchLine_29.result().setName("SketchLine_26")
@@ -252,14 +252,14 @@ SketchConstraintDistance_12.setName("SketchConstraintDistance_11")
 SketchConstraintDistance_13 = Sketch_3.setDistance(SketchCircle_3.center(), SketchLine_29.result(), 10)
 SketchConstraintDistance_13.setName("SketchConstraintDistance_12")
 model.do()
-Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_3_2f"), model.selection("WIRE", "Sketch_3/Wire-SketchCircle_4_2f")], model.selection(), model.selection("FACE", "Boolean_1_1/Modified_Face_6"), 5, model.selection("FACE", "Boolean_1_1/Modified_Face_8"), 5)
-Boolean_3 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_2_1")], [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_2_2")])
-Recover_1 = model.addRecover(Part_1_doc, Boolean_3, [Extrusion_2.results()[1], Extrusion_2.result()])
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchCircle_3_2f"), model.selection("WIRE", "Sketch_3/Wire-SketchCircle_4_2f")], model.selection(), model.selection("FACE", "Cut_1_1/Modified_Face_6"), 5, model.selection("FACE", "Cut_1_1/Modified_Face_8"), 5)
+Cut_3 = model.addCut(Part_1_doc, [model.selection("SOLID", "Cut_2_1")], [model.selection("SOLID", "Extrusion_2_1"), model.selection("SOLID", "Extrusion_2_2")])
+Recover_1 = model.addRecover(Part_1_doc, Cut_3, [Extrusion_2.results()[1], Extrusion_2.result()])
 Rotation_1 = model.addRotation(Part_1_doc, [model.selection("SOLID", "Recover_1_1"), model.selection("SOLID", "Recover_1_2")], model.selection("EDGE", "PartSet/OZ"), 120)
-Boolean_4 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_3_1")], [model.selection("SOLID", "Rotation_1_1"), model.selection("SOLID", "Rotation_1_2")])
-Recover_2 = model.addRecover(Part_1_doc, Boolean_4, [Rotation_1.results()[1], Rotation_1.result()])
+Cut_4 = model.addCut(Part_1_doc, [model.selection("SOLID", "Cut_3_1")], [model.selection("SOLID", "Rotation_1_1"), model.selection("SOLID", "Rotation_1_2")])
+Recover_2 = model.addRecover(Part_1_doc, Cut_4, [Rotation_1.results()[1], Rotation_1.result()])
 Rotation_2 = model.addRotation(Part_1_doc, [model.selection("SOLID", "Recover_2_1"), model.selection("SOLID", "Recover_2_2")], model.selection("EDGE", "PartSet/OZ"), 120)
-Boolean_5 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_4_1")], [model.selection("SOLID", "Rotation_2_2"), model.selection("SOLID", "Rotation_2_1")])
+Cut_5 = model.addCut(Part_1_doc, [model.selection("SOLID", "Cut_4_1")], [model.selection("SOLID", "Rotation_2_2"), model.selection("SOLID", "Rotation_2_1")])
 model.do()
 Part_2 = model.addPart(partSet)
 Part_2.setName("Arm 1")
@@ -499,10 +499,10 @@ Axis_4 = model.addAxis(Part_2_doc, model.selection("FACE", "PartSet/XOZ"), model
 Rotation_3 = model.addRotation(Part_2_doc, [model.selection("FACE", "Face_1_1")], model.selection("EDGE", "Axis_1"), -43.8752)
 Pipe_1 = model.addPipe(Part_2_doc, [model.selection("FACE", "Rotation_1_1")], model.selection("EDGE", "Sketch_2/Edge-SketchArc_3_2"))
 Extrusion_3 = model.addExtrusion(Part_2_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_2_2f"), model.selection("WIRE", "Sketch_2/Wire-SketchLine_14r-SketchLine_15r-SketchLine_16r-SketchLine_17r")], model.selection(), "Gap/2", "Gap/2")
-Boolean_6 = model.addFuse(Part_2_doc, [model.selection("SOLID", "Pipe_1_1")], [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2")])
+Fuse_1 = model.addFuse(Part_2_doc, [model.selection("SOLID", "Pipe_1_1")], [model.selection("SOLID", "Extrusion_1_1"), model.selection("SOLID", "Extrusion_1_2")])
 Extrusion_4 = model.addExtrusion(Part_2_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_3_2f")], model.selection(), "Gap", "Gap")
-Boolean_7 = model.addCut(Part_2_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
-Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Boolean_2_1")], model.selection("VERTEX", "Sketch_2/Vertex-SketchArc_3_2s"), model.selection("VERTEX", "Sketch_2/Vertex-SketchLine_21e"))
+Cut_1 = model.addCut(Part_2_doc, [model.selection("SOLID", "Fuse_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
+Translation_1 = model.addTranslation(Part_2_doc, [model.selection("SOLID", "Cut_1_1")], model.selection("VERTEX", "Sketch_2/Vertex-SketchArc_3_2s"), model.selection("VERTEX", "Sketch_2/Vertex-SketchLine_21e"))
 model.do()
 Part_3 = model.duplicatePart(Part_2)
 Part_3.setName("Arm 2")
@@ -597,8 +597,8 @@ SketchLine_111 = Sketch_12.addLine(model.selection("EDGE", "PartSet/OZ"))
 SketchConstraintDistance_37 = Sketch_12.setDistance(SketchLine_108.startPoint(), SketchLine_111.result(), 4)
 model.do()
 Revolution_3 = model.addRevolution(Part_5_doc, [model.selection("FACE", "Sketch_3/Face-SketchLine_14f-SketchLine_15f-SketchLine_16f")], model.selection("EDGE", "PartSet/OZ"), 360, 0)
-Boolean_12 = model.addCut(Part_5_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Revolution_2_1")])
-Boolean_13 = model.addFuse(Part_5_doc, [model.selection("SOLID", "Boolean_1_1"), model.selection("SOLID", "Revolution_1_1")], [])
+Cut_12 = model.addCut(Part_5_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Revolution_2_1")])
+Cut_13 = model.addFuse(Part_5_doc, [model.selection("SOLID", "Cut_1_1"), model.selection("SOLID", "Revolution_1_1")], [])
 
 # Test reexecution after parameter change
 Parameter_H.setValue(120)