Task 2.1. Management of result names

[modules/shaper.git] / test.models / angle30.py

diff --git a/test.models/angle30.py b/test.models/angle30.py
index 1339a236b3d0534916ff3e3fcbe40f520e3017fa..8554711c959dd62cb8c05db94e82cda16be8bbc9 100644 (file)
--- a/test.models/angle30.py
+++ b/test.models/angle30.py
@@ -1,3 +1,23 @@
+## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
+##
+## This library is free software; you can redistribute it and/or
+## modify it under the terms of the GNU Lesser General Public
+## License as published by the Free Software Foundation; either
+## version 2.1 of the License, or (at your option) any later version.
+##
+## This library is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+## Lesser General Public License for more details.
+##
+## You should have received a copy of the GNU Lesser General Public
+## License along with this library; if not, write to the Free Software
+## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+##
+## See http:##www.salome-platform.org/ or
+## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+##
+
 from salome.shaper import model
 
 model.begin()
@@ -121,6 +141,7 @@ model.do()
 Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f")], model.selection(), 75, 45)
 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
 Boolean_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
+Boolean_1.result().setName("Boolean_1_1")
 Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "PartSet/XOY"))
 SketchLine_20 = Sketch_4.addLine(-4, 38.00000000000001, -4, 21.26617031813674)
 SketchLine_20.setName("SketchLine_36")
@@ -333,9 +354,11 @@ model.do()
 Extrusion_3 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_4")], model.selection(), 50, 30)
 Extrusion_4 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
 Boolean_2 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_3_1")], [model.selection("SOLID", "Extrusion_4_1")])
+Boolean_2.result().setName("Boolean_2_1")
 Extrusion_5 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
 Extrusion_6 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_2_2f")], model.selection(), 75, 40)
 Boolean_3 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_6_1")], [model.selection("SOLID", "Extrusion_5_1")])
+Boolean_3.result().setName("Boolean_3_1")
 Sketch_5 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
 SketchLine_38 = Sketch_5.addLine(44, 3.464101615137769, 17.52573586555855, 49.31887218898888)
 SketchLine_38.setName("SketchLine_41")
@@ -469,8 +492,11 @@ SketchConstraintCoincidence_90.setName("SketchConstraintCoincidence_94")
 model.do()
 Extrusion_7 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchLine_55r-SketchLine_44r-SketchLine_52r-SketchLine_53r-SketchLine_54r-SketchLine_47r-SketchLine_48r-SketchLine_49r-SketchArc_12_2r-SketchArc_13_2r")], model.selection(), 0, 40)
 Boolean_4 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Boolean_1_1")], [model.selection("SOLID", "Boolean_2_1")])
+Boolean_4.result().setName("Boolean_4_1")
 Boolean_5 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Boolean_4_1")], [model.selection("SOLID", "Extrusion_7_1")])
+Boolean_5.result().setName("Boolean_5_1")
 Boolean_6 = model.addCut(Part_1_doc, [model.selection("SOLID", "Boolean_5_1")], [model.selection("SOLID", "Boolean_3_1")])
+Boolean_6.result().setName("Boolean_6_1")
 Extrusion_8 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_10r-SketchLine_11r-SketchLine_8r-SketchLine_3r-SketchLine_9r-SketchLine_6r-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), 55, 55)
 Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_7"))
 SketchLine_54 = Sketch_7.addLine(55, -9.237604307034024, 55, -60)
@@ -742,6 +768,7 @@ SketchConstraintDistance_44.setName("SketchConstraintDistance_45")
 model.do()
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_79r-SketchLine_80r-SketchLine_81r-SketchLine_73r-SketchLine_74r-SketchLine_75r-SketchLine_76r-SketchLine_77r-SketchArc_16_2r-SketchArc_17_2r"), model.selection("WIRE", "Sketch_8/Wire-SketchCircle_8_2f"), model.selection("WIRE", "Sketch_8/Wire-SketchCircle_9_2f"), model.selection("WIRE", "Sketch_8/Wire-SketchArc_19_2f-SketchArc_18_2f-SketchLine_82f-SketchLine_83r")], model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")])
 Boolean_7 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Boolean_6_1")], [model.selection("SOLID", "ExtrusionCut_2_1")])
+Boolean_7.result().setName("Boolean_7_1")
 model.do()
 
 # Test reexecution after parameter change