Update "big models" tests

[modules/shaper.git] / test.models / angle30.py

diff --git a/test.models/angle30.py b/test.models/angle30.py
index 5a37ad7d3c84fffc18e3e81c3b41eeab2a0dcd10..71b22370785f2beb570326c9a35b981dd1d03a48 100644 (file)
--- a/test.models/angle30.py
+++ b/test.models/angle30.py
@@ -129,7 +129,7 @@ SketchConstraintCoincidence_26 = Sketch_3.setCoincident(SketchLine_13.startPoint
 SketchConstraintHorizontal_2 = Sketch_3.setHorizontal(SketchLine_16.result())
 SketchConstraintVertical_3 = Sketch_3.setVertical(SketchLine_15.result())
 SketchConstraintVertical_4 = Sketch_3.setVertical(SketchLine_13.result())
-SketchLine_17 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"))
+SketchLine_17 = Sketch_3.addLine(model.selection("EDGE", "Sketch_1/SketchLine_4"))
 SketchConstraintParallel_2 = Sketch_3.setParallel(SketchLine_14.result(), SketchLine_17.result())
 SketchConstraintDistance_6 = Sketch_3.setDistance(SketchLine_14.endPoint(), SketchLine_17.result(), 1, False)
 SketchLine_18 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OZ"))
@@ -138,7 +138,7 @@ SketchConstraintDistance_8 = Sketch_3.setDistance(SketchLine_13.startPoint(), Sk
 SketchLine_19 = Sketch_3.addLine(model.selection("EDGE", "PartSet/OY"))
 SketchConstraintDistance_9 = Sketch_3.setDistance(SketchLine_15.endPoint(), SketchLine_19.result(), 70, False)
 model.do()
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f")], model.selection(), 75, 45)
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchCircle_1_2r-SketchCircle_2_2r_wire")], model.selection(), 75, 45)
 Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("COMPOUND", "Sketch_3")], model.selection(), 22, 22)
 Common_1 = model.addCommon(Part_1_doc, [model.selection("SOLID", "Extrusion_1_1")], [model.selection("SOLID", "Extrusion_2_1")])
 Sketch_4 = model.addSketch(Part_1_doc, model.standardPlane("XOY"))
@@ -298,7 +298,7 @@ SketchConstraintCoincidence_51 = Sketch_4.setCoincident(SketchLine_36.startPoint
 SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_57")
 SketchConstraintCoincidence_52 = Sketch_4.setCoincident(SketchLine_25.startPoint(), SketchLine_34.endPoint())
 SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_58")
-SketchCircle_3 = Sketch_4.addCircle(model.selection("EDGE", "Sketch_2/Edge-SketchCircle_1_2"))
+SketchCircle_3 = Sketch_4.addCircle(model.selection("EDGE", "Sketch_2/SketchCircle_1_2"))
 SketchConstraintCoincidence_53 = Sketch_4.setCoincident(SketchLine_22.startPoint(), SketchCircle_3.results()[1])
 SketchConstraintCoincidence_53.setName("SketchConstraintCoincidence_59")
 SketchConstraintCoincidence_54 = Sketch_4.setCoincident(SketchArc_4.endPoint(), SketchCircle_3.results()[1])
@@ -379,18 +379,18 @@ Sketch_5 = model.addSketch(Part_1_doc, model.defaultPlane("YOZ"))
 SketchLine_38 = Sketch_5.addLine(44, 3.464101615137744, 16.50000000000003, 51.09549882328188)
 SketchLine_38.setName("SketchLine_41")
 SketchLine_38.result().setName("SketchLine_41")
-SketchPoint_5 = Sketch_5.addPoint(model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_5s-SketchLine_4e"))
+SketchPoint_5 = Sketch_5.addPoint(model.selection("VERTEX", "Sketch_1/SketchLine_4_EndVertex"))
 SketchConstraintCoincidence_69 = Sketch_5.setCoincident(SketchLine_38.startPoint(), SketchPoint_5.result())
 SketchConstraintCoincidence_69.setName("SketchConstraintCoincidence_73")
-SketchLine_39 = Sketch_5.addLine(model.selection("EDGE", "Sketch_1/Edge-SketchLine_4"))
+SketchLine_39 = Sketch_5.addLine(model.selection("EDGE", "Sketch_1/SketchLine_4"))
 SketchLine_39.setName("SketchLine_42")
 SketchLine_39.result().setName("SketchLine_42")
 SketchConstraintPerpendicular_2 = Sketch_5.setPerpendicular(SketchLine_38.result(), SketchLine_39.result())
 SketchConstraintLength_1 = Sketch_5.setLength(SketchLine_38.result(), 55)
 SketchConstraintLength_1.setName("SketchConstraintLength_6")
 model.do()
-Axis_4 = model.addAxis(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchLine_10r-SketchLine_11r-SketchLine_8r-SketchLine_3r-SketchLine_9r-SketchLine_6r-SketchArc_1_2r-SketchArc_2_2f"), model.selection("VERTEX", "Sketch_1/Vertex-SketchLine_5s-SketchLine_4e"))
-Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("VERTEX", "Sketch_5/Vertex-SketchLine_41e"), False)
+Axis_4 = model.addAxis(Part_1_doc, model.selection("FACE", "Sketch_1/Face-SketchLine_6r-SketchLine_8r-SketchArc_1_2r-SketchLine_9r-SketchLine_3r-SketchLine_11r-SketchArc_2_2f-SketchLine_10r"), model.selection("VERTEX", "Sketch_1/SketchLine_4_EndVertex"))
+Plane_4 = model.addPlane(Part_1_doc, model.selection("EDGE", "Axis_1"), model.selection("VERTEX", "Sketch_5/SketchLine_41_EndVertex"), False)
 Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
 SketchLine_40 = Sketch_6.addLine(3.999999999999999, 13.00000000002605, 4, 12.89999999999998)
 SketchLine_40.setName("SketchLine_55")
@@ -459,7 +459,7 @@ SketchConstraintDistance_20 = Sketch_6.setDistance(SketchLine_48.startPoint(), S
 SketchConstraintDistance_20.setName("SketchConstraintDistance_20")
 SketchConstraintDistance_21 = Sketch_6.setDistance(SketchLine_51.startPoint(), SketchLine_49.result(), 0.8, False)
 SketchConstraintDistance_21.setName("SketchConstraintDistance_21")
-SketchLine_52 = Sketch_6.addLine(model.selection("EDGE", "Sketch_5/Edge-SketchLine_41"))
+SketchLine_52 = Sketch_6.addLine(model.selection("EDGE", "Sketch_5/SketchLine_41"))
 SketchLine_52.setName("SketchLine_51")
 SketchLine_52.result().setName("SketchLine_51")
 SketchConstraintDistance_22 = Sketch_6.setDistance(SketchLine_45.startPoint(), SketchLine_52.result(), 4, False)
@@ -517,23 +517,23 @@ SketchLine_53.result().setName("SketchLine_56")
 SketchConstraintCoincidence_90 = Sketch_6.setCoincident(SketchArc_12.startPoint(), SketchLine_53.result())
 SketchConstraintCoincidence_90.setName("SketchConstraintCoincidence_94")
 model.do()
-Extrusion_7 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchLine_55r-SketchLine_44r-SketchLine_52r-SketchLine_53r-SketchLine_54r-SketchLine_47r-SketchLine_48r-SketchLine_49r-SketchArc_12_2r-SketchArc_13_2r")], model.selection(), 0, 40)
+Extrusion_7 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_6/Face-SketchArc_13_2r-SketchLine_54r-SketchLine_49r-SketchLine_48r-SketchLine_47r-SketchLine_53r-SketchArc_12_2r-SketchLine_52r-SketchLine_44r-SketchLine_55r")], model.selection(), 0, 40)
 Fuse_1 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Common_1_1")], [model.selection("SOLID", "Common_2_1")])
 Fuse_2 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Fuse_1_1")], [model.selection("SOLID", "Extrusion_7_1")])
 Cut_1 = model.addCut(Part_1_doc, [model.selection("SOLID", "Fuse_2_1")], [model.selection("SOLID", "Common_3_1")])
-Extrusion_8 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Wire-SketchLine_10r-SketchLine_11r-SketchLine_8r-SketchLine_3r-SketchLine_9r-SketchLine_6r-SketchArc_1_2r-SketchArc_2_2f")], model.selection(), 55, 55)
-Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_1"))
+Extrusion_8 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Sketch_1/Face-SketchLine_6r-SketchLine_8r-SketchArc_1_2r-SketchLine_9r-SketchLine_3r-SketchLine_11r-SketchArc_2_2f-SketchLine_10r_wire")], model.selection(), 55, 55)
+Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_10"))
 SketchLine_54 = Sketch_7.addLine(55, -9.237604307034024, 55, -60)
 SketchLine_54.setName("SketchLine_66")
 SketchLine_54.result().setName("SketchLine_66")
-SketchPoint_6 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_2&Extrusion_8_1/Generated_Face_1&Extrusion_8_1/To_Face_1"))
+SketchPoint_6 = Sketch_7.addPoint(model.selection("VERTEX", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_10][Extrusion_8_1/To_Face]"))
 SketchLine_55 = Sketch_7.addLine(55, -9.237604307034024, 55, -70)
 SketchLine_55.setName("SketchLine_57")
 SketchLine_55.result().setName("SketchLine_57")
 SketchLine_55.setAuxiliary(True)
 SketchConstraintCoincidence_91 = Sketch_7.setCoincident(SketchLine_55.startPoint(), SketchPoint_6.result())
 SketchConstraintCoincidence_91.setName("SketchConstraintCoincidence_95")
-SketchPoint_7 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_8&Extrusion_8_1/Generated_Face_1&Extrusion_8_1/To_Face_1"))
+SketchPoint_7 = Sketch_7.addPoint(model.selection("VERTEX", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_10][Extrusion_8_1/To_Face]"))
 SketchConstraintCoincidence_92 = Sketch_7.setCoincident(SketchLine_55.endPoint(), SketchPoint_7.result())
 SketchConstraintCoincidence_92.setName("SketchConstraintCoincidence_96")
 SketchLine_56 = Sketch_7.addLine(45.00000000000001, -70, -45.00000000000001, -70)
@@ -545,7 +545,7 @@ SketchLine_57.result().setName("SketchLine_58")
 SketchLine_57.setAuxiliary(True)
 SketchConstraintCoincidence_93 = Sketch_7.setCoincident(SketchLine_55.endPoint(), SketchLine_57.startPoint())
 SketchConstraintCoincidence_93.setName("SketchConstraintCoincidence_97")
-SketchPoint_8 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_8&Extrusion_8_1/Generated_Face_1&Extrusion_8_1/From_Face_1"))
+SketchPoint_8 = Sketch_7.addPoint(model.selection("VERTEX", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_6][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_10][Extrusion_8_1/From_Face]"))
 SketchConstraintCoincidence_94 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchPoint_8.result())
 SketchConstraintCoincidence_94.setName("SketchConstraintCoincidence_98")
 SketchLine_58 = Sketch_7.addLine(-55.00000000000001, -59.99999999999999, -55, -9.237604307034024)
@@ -557,7 +557,7 @@ SketchLine_59.result().setName("SketchLine_59")
 SketchLine_59.setAuxiliary(True)
 SketchConstraintCoincidence_95 = Sketch_7.setCoincident(SketchLine_57.endPoint(), SketchLine_59.startPoint())
 SketchConstraintCoincidence_95.setName("SketchConstraintCoincidence_99")
-SketchPoint_9 = Sketch_7.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_2&Extrusion_8_1/Generated_Face_1&Extrusion_8_1/From_Face_1"))
+SketchPoint_9 = Sketch_7.addPoint(model.selection("VERTEX", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_10][Extrusion_8_1/From_Face]"))
 SketchConstraintCoincidence_96 = Sketch_7.setCoincident(SketchLine_59.endPoint(), SketchPoint_9.result())
 SketchConstraintCoincidence_96.setName("SketchConstraintCoincidence_100")
 SketchLine_60 = Sketch_7.addLine(-55, -9.237604307034024, -60.00000000000001, -9.237604307034024)
@@ -654,7 +654,7 @@ SketchCircle_7 = Sketch_7.addCircle(-44, -20.23760430703402, 5)
 SketchConstraintRadius_16 = Sketch_7.setRadius(SketchCircle_7.results()[1], 5)
 SketchConstraintDistance_31 = Sketch_7.setDistance(SketchCircle_6.center(), SketchLine_54.result(), 11, False)
 SketchConstraintDistance_31.setName("SketchConstraintDistance_31")
-SketchLine_66 = Sketch_7.addLine(model.selection("EDGE", "Extrusion_8_1/Generated_Face_2&Extrusion_8_1/Generated_Face_1"))
+SketchLine_66 = Sketch_7.addLine(model.selection("EDGE", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchArc_2_2][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_10]"))
 SketchLine_66.setName("SketchLine_69")
 SketchLine_66.result().setName("SketchLine_69")
 SketchConstraintDistance_32 = Sketch_7.setDistance(SketchCircle_6.center(), SketchLine_66.result(), 11, False)
@@ -669,20 +669,20 @@ SketchConstraintLength_3 = Sketch_7.setLength(SketchLine_61.result(), 70)
 SketchConstraintLength_3.setName("SketchConstraintLength_8")
 SketchConstraintDistanceHorizontal_1 = Sketch_7.setHorizontalDistance(SketchPoint_7.coordinates(), SketchLine_62.endPoint(), 5)
 model.do()
-ExtrusionCut_1_objects_1 = [model.selection("WIRE", "Sketch_7/Wire-SketchLine_66f-SketchLine_67f-SketchLine_68f-SketchLine_60f-SketchLine_61f-SketchLine_62f-SketchLine_63f-SketchLine_64f-SketchArc_14_2r-SketchArc_15_2r"), model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_5_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_7_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_6_2f")]
+ExtrusionCut_1_objects_1 = [model.selection("WIRE", "Sketch_7/Face-SketchLine_66r-SketchArc_14_2r-SketchLine_67f-SketchArc_15_2r-SketchLine_68f-SketchLine_60f-SketchLine_61f-SketchLine_62f-SketchLine_63f-SketchLine_64f_wire"), model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_5_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_7_2f"), model.selection("FACE", "Sketch_7/Face-SketchCircle_6_2f")]
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_1_objects_1, model.selection(), 0, 10, [model.selection("SOLID", "Extrusion_8_1")])
-Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face_3"))
+Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11"))
 SketchLine_67 = Sketch_8.addLine(55, -34.06366588218793, 55, 66.69872981077805)
 SketchLine_67.setName("SketchLine_79")
 SketchLine_67.result().setName("SketchLine_79")
-SketchPoint_10 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_3&Extrusion_8_1/Generated_Face_3&ExtrusionCut_1_1/Modfied_13"))
+SketchPoint_10 = Sketch_8.addPoint(model.selection("VERTEX", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_2_2][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11][ExtrusionCut_1_1/Modified_Face&Extrusion_8_1/To_Face&weak_name_1]"))
 SketchLine_68 = Sketch_8.addLine(55, -34.06366588218793, 55, 76.69872981077803)
 SketchLine_68.setName("SketchLine_70")
 SketchLine_68.result().setName("SketchLine_70")
 SketchLine_68.setAuxiliary(True)
 SketchConstraintCoincidence_116 = Sketch_8.setCoincident(SketchLine_68.startPoint(), SketchPoint_10.result())
 SketchConstraintCoincidence_116.setName("SketchConstraintCoincidence_120")
-SketchPoint_11 = Sketch_8.addPoint(model.selection("VERTEX", "Extrusion_8_1/Generated_Face_3&ExtrusionCut_1_1/Modfied_13&Extrusion_8_1/Generated_Face_4"))
+SketchPoint_11 = Sketch_8.addPoint(model.selection("VERTEX", "[Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11][ExtrusionCut_1_1/Modified_Face&Extrusion_8_1/To_Face&weak_name_1][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_3]"))
 SketchConstraintCoincidence_117 = Sketch_8.setCoincident(SketchLine_68.endPoint(), SketchPoint_11.result())
 SketchConstraintCoincidence_117.setName("SketchConstraintCoincidence_121")
 SketchLine_69 = Sketch_8.addLine(45, 76.69872981077805, -44.9999999570576, 76.69872981077805)
@@ -694,7 +694,7 @@ SketchLine_70.result().setName("SketchLine_71")
 SketchLine_70.setAuxiliary(True)
 SketchConstraintCoincidence_118 = Sketch_8.setCoincident(SketchLine_68.endPoint(), SketchLine_70.startPoint())
 SketchConstraintCoincidence_118.setName("SketchConstraintCoincidence_122")
-SketchPoint_12 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_1&Extrusion_8_1/Generated_Face_3&Extrusion_8_1/Generated_Face_4"))
+SketchPoint_12 = Sketch_8.addPoint(model.selection("VERTEX", "[ExtrusionCut_1_1/Modified_Face&Extrusion_8_1/From_Face&weak_name_1][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_3]"))
 SketchConstraintCoincidence_119 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchPoint_12.result())
 SketchConstraintCoincidence_119.setName("SketchConstraintCoincidence_123")
 SketchLine_71 = Sketch_8.addLine(-55, 66.69872976783566, -55, -34.06366588218793)
@@ -706,7 +706,7 @@ SketchLine_72.result().setName("SketchLine_72")
 SketchLine_72.setAuxiliary(True)
 SketchConstraintCoincidence_120 = Sketch_8.setCoincident(SketchLine_70.endPoint(), SketchLine_72.startPoint())
 SketchConstraintCoincidence_120.setName("SketchConstraintCoincidence_124")
-SketchPoint_13 = Sketch_8.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_1&Extrusion_8_1/Generated_Face_3"))
+SketchPoint_13 = Sketch_8.addPoint(model.selection("VERTEX", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_2_2][ExtrusionCut_1_1/Modified_Face&Extrusion_8_1/From_Face&weak_name_1][Extrusion_8_1/Generated_Face&Sketch_1/SketchLine_11]"))
 SketchConstraintCoincidence_121 = Sketch_8.setCoincident(SketchLine_72.endPoint(), SketchPoint_13.result())
 SketchConstraintCoincidence_121.setName("SketchConstraintCoincidence_125")
 SketchLine_73 = Sketch_8.addLine(-55, -34.06366588218793, -83.25521566485324, -34.06366588218793)
@@ -846,7 +846,7 @@ SketchConstraintDistance_43.setName("SketchConstraintDistance_45")
 SketchConstraintDistance_44 = Sketch_8.setDistance(SketchArc_18.startPoint(), SketchLine_69.result(), 25, False)
 SketchConstraintDistance_44.setName("SketchConstraintDistance_46")
 model.do()
-ExtrusionCut_2_objects_1 = [model.selection("FACE", "Sketch_8/Face-SketchLine_79r-SketchLine_80r-SketchLine_81r-SketchLine_73r-SketchLine_74r-SketchLine_75r-SketchLine_76r-SketchLine_77r-SketchArc_16_2r-SketchArc_17_2r"), model.selection("WIRE", "Sketch_8/Wire-SketchCircle_8_2f"), model.selection("WIRE", "Sketch_8/Wire-SketchCircle_9_2f"), model.selection("WIRE", "Sketch_8/Wire-SketchArc_19_2f-SketchArc_18_2f-SketchLine_82f-SketchLine_83r")]
+ExtrusionCut_2_objects_1 = [model.selection("FACE", "Sketch_8/Face-SketchLine_77r-SketchLine_76r-SketchLine_75r-SketchLine_74r-SketchLine_73r-SketchLine_81r-SketchArc_17_2r-SketchLine_80r-SketchArc_16_2r-SketchLine_79r"), model.selection("WIRE", "Sketch_8/Face-SketchCircle_8_2f_wire"), model.selection("WIRE", "Sketch_8/Face-SketchCircle_9_2f_wire"), model.selection("WIRE", "Sketch_8/Face-SketchArc_19_2f-SketchLine_82f-SketchArc_18_2f-SketchLine_83r_wire")]
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, ExtrusionCut_2_objects_1, model.selection(), 0, 10, [model.selection("SOLID", "ExtrusionCut_1_1")])
 Fuse_3 = model.addFuse(Part_1_doc, [model.selection("SOLID", "Cut_1_1")], [model.selection("SOLID", "ExtrusionCut_2_1")])
 model.do()