-## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
+# Copyright (C) 2014-2023 CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
from SketchAPI import *
SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchPoint_1.coordinates())
SketchConstraintCoincidence_14.setName("SketchConstraintCoincidence_15")
model.do()
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f-SketchLine_9f-SketchLine_10f-SketchArc_1_2r-SketchArc_2_2r")], model.selection(), "b/2", "b/2")
-Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face_1"))
-SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_2&Extrusion_1_1/To_Face_1"))
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2f-SketchArc_2_2r-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f-SketchLine_9f-SketchArc_1_2r-SketchLine_10f")], model.selection(), "b/2", "b/2")
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
+SketchPoint_2 = Sketch_2.addPoint(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_9][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_1/To_Face]"))
SketchCircle_1 = Sketch_2.addCircle(-15, 35.00000000000001, 25)
SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchPoint_2.result(), SketchCircle_1.center())
SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_16")
SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_1.results()[1], "50/2")
model.do()
-ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f")], model.selection(), 0, 13, [model.selection("SOLID", "Extrusion_1_1")])
-Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"))
-SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_2&ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_4"))
-SketchLine_11 = Sketch_3.addLine(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_4"))
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchCircle_1_2f_wire")], model.selection(), 0, 13, [model.selection("SOLID", "Extrusion_1_1")])
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&ExtrusionCut_1_1/From_Face"))
+SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Generated_Vertex&ExtrusionCut_1_1/From_Face"))
+SketchLine_11 = Sketch_3.addLine(model.selection("EDGE", "([ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9])([Extrusion_1_1/From_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9])2([Extrusion_1_1/From_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2])2([ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9])2"))
SketchArc_3 = Sketch_3.addArc(-15, 35.00000000000001, -15, 46.0103340429751, -17.02045759563166, 24.17663606626138, True)
SketchConstraintCoincidence_16 = Sketch_3.setCoincident(SketchPoint_3.result(), SketchArc_3.center())
SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_17")
SketchConstraintCoincidence_17 = Sketch_3.setCoincident(SketchLine_11.result(), SketchArc_3.startPoint())
SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18")
-SketchArc_4 = Sketch_3.addArc(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_2&ExtrusionCut_1_1/Modfied_4"))
+SketchArc_4 = Sketch_3.addArc(model.selection("EDGE", "([ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9])([Extrusion_1_1/From_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9])2([Extrusion_1_1/From_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2])2([ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2])2"))
SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchArc_3.endPoint(), SketchArc_4.results()[1])
SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_19")
SketchLine_12 = Sketch_3.addLine(-15, 46.0103340429751, -15, 35.00000000000001)
SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_24")
model.do()
ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchArc_3_2f-SketchLine_12f-SketchArc_5_2r")], model.selection(), 5, 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
-Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_1_1/To_Face_1"))
-SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "ExtrusionFuse_1_1/Modfied_4&ExtrusionFuse_1_1/Modfied_5&ExtrusionFuse_1_1/To_Face_1"))
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_1_1/To_Face"))
+SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "[ExtrusionFuse_1_1/Generated_Face&Sketch_3/SketchArc_5_2][ExtrusionFuse_1_1/Generated_Face&Sketch_3/SketchLine_12][ExtrusionFuse_1_1/To_Face]"))
SketchCircle_2 = Sketch_4.addCircle(-15, 35.00000000000001, 5)
SketchConstraintCoincidence_24 = Sketch_4.setCoincident(SketchPoint_4.result(), SketchCircle_2.center())
SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_25")
SketchConstraintRadius_4 = Sketch_4.setRadius(SketchCircle_2.results()[1], "10/2")
model.do()
ExtrusionFuse_2 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_4/Face-SketchCircle_2_2f")], model.selection(), 8, 0, [model.selection("SOLID", "ExtrusionFuse_1_1")])
-Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_1"))
-SketchArc_6 = Sketch_5.addArc(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_1&ExtrusionFuse_1_1/Modfied_3"))
+Sketch_5 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face"))
+SketchArc_6 = Sketch_5.addArc(model.selection("EDGE", "[ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face][ExtrusionFuse_1_1/Modified_Face&Sketch_1/SketchArc_1_2]"))
SketchArc_7 = Sketch_5.addArc(-45, 35, -45, 5, -25.41666666666737, 12.27351642784166, False)
SketchConstraintCoincidence_25 = Sketch_5.setCoincident(SketchArc_6.result(), SketchArc_7.center())
SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_26")
-SketchCircle_3 = Sketch_5.addCircle(model.selection("EDGE", "ExtrusionFuse_2_1/Modfied_5&ExtrusionFuse_2_1/To_Face_1"))
+SketchCircle_3 = Sketch_5.addCircle(model.selection("EDGE", "[ExtrusionFuse_2_1/Generated_Face&Sketch_4/SketchCircle_2_2][ExtrusionFuse_2_1/To_Face]"))
SketchArc_8 = Sketch_5.addArc(-15, 35.00000000000001, -25.41666666666737, 12.27351642784166, -30.00000000000075, 14.99999999999944, True)
SketchConstraintCoincidence_26 = Sketch_5.setCoincident(SketchCircle_3.result(), SketchArc_8.center())
SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_27")
SketchConstraintCoincidence_33 = Sketch_5.setCoincident(SketchArc_9.startPoint(), SketchLine_13.endPoint())
SketchConstraintCoincidence_33.setName("SketchConstraintCoincidence_34")
model.do()
-ExtrusionFuse_3 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_7_2f-SketchArc_8_2r-SketchLine_13r-SketchArc_9_2r")], model.selection(), 0, 8, [model.selection("SOLID", "ExtrusionFuse_2_1")])
-Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_3_1/Modfied_3"))
-SketchLine_14 = Sketch_6.addLine(model.selection("EDGE", "ExtrusionFuse_3_1/Modfied_3&Extrusion_1_1/Generated_Face_7"))
+ExtrusionFuse_3 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_5/Face-SketchArc_7_2f-SketchArc_8_2r-SketchArc_9_2r-SketchLine_13r")], model.selection(), 0, 8, [model.selection("SOLID", "ExtrusionFuse_2_1")])
+Sketch_6 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_3_1/Modified_Face&Extrusion_1_1/To_Face"))
+SketchLine_14 = Sketch_6.addLine(model.selection("EDGE", "[ExtrusionFuse_3_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_5]"))
SketchArc_10 = Sketch_6.addArc(55, 35, 55, 15, 35, 35, True)
SketchConstraintCoincidence_34 = Sketch_6.setCoincident(SketchLine_14.result(), SketchArc_10.center())
SketchConstraintCoincidence_34.setName("SketchConstraintCoincidence_35")
SketchConstraintCoincidence_35 = Sketch_6.setCoincident(SketchLine_14.result(), SketchArc_10.startPoint())
SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_36")
-SketchLine_15 = Sketch_6.addLine(model.selection("EDGE", "ExtrusionFuse_3_1/Modfied_3&Extrusion_1_1/Generated_Face_8"))
-SketchConstraintDistance_8 = Sketch_6.setDistance(SketchArc_10.center(), SketchLine_15.result(), 35)
-SketchLine_16 = Sketch_6.addLine(35, 35, 35, 48)
+SketchLine_15 = Sketch_6.addLine(model.selection("EDGE", "[ExtrusionFuse_3_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4]"))
+SketchConstraintDistance_8 = Sketch_6.setDistance(SketchArc_10.center(), SketchLine_15.result(), 35, False)
+SketchLine_16 = Sketch_6.addLine(35, 35, 35, 47.99999999999999)
SketchConstraintCoincidence_36 = Sketch_6.setCoincident(SketchArc_10.endPoint(), SketchLine_16.startPoint())
SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_37")
-SketchLine_17 = Sketch_6.addLine(model.selection("EDGE", "ExtrusionFuse_3_1/Modfied_3&Extrusion_1_1/Generated_Face_6"))
+SketchLine_17 = Sketch_6.addLine(model.selection("EDGE", "[ExtrusionFuse_3_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6]"))
SketchConstraintCoincidence_37 = Sketch_6.setCoincident(SketchLine_16.endPoint(), SketchLine_17.result())
SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_38")
SketchConstraintVertical_6 = Sketch_6.setVertical(SketchLine_16.result())
SketchConstraintTangent_4 = Sketch_6.setTangent(SketchLine_16.result(), SketchArc_10.results()[1])
SketchConstraintRadius_5 = Sketch_6.setRadius(SketchArc_10.results()[1], 20)
-SketchLine_18 = Sketch_6.addLine(55, 15, 55, 48)
+SketchLine_18 = Sketch_6.addLine(55, 15, 55, 47.99999999999999)
SketchConstraintCoincidence_38 = Sketch_6.setCoincident(SketchArc_10.startPoint(), SketchLine_18.startPoint())
SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_39")
SketchConstraintCoincidence_39 = Sketch_6.setCoincident(SketchLine_14.endPoint(), SketchLine_18.endPoint())
SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_40")
-SketchLine_19 = Sketch_6.addLine(35, 48, 55, 48)
+SketchLine_19 = Sketch_6.addLine(35, 47.99999999999999, 55, 47.99999999999999)
SketchConstraintCoincidence_40 = Sketch_6.setCoincident(SketchLine_16.endPoint(), SketchLine_19.startPoint())
SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_41")
SketchConstraintCoincidence_41 = Sketch_6.setCoincident(SketchLine_14.endPoint(), SketchLine_19.endPoint())
SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_42")
model.do()
-ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_6/Wire-SketchArc_10_2f-SketchLine_16r-SketchLine_18f-SketchLine_19r")], model.selection(), 0, 9, [model.selection("SOLID", "ExtrusionFuse_3_1")])
-Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/From_Face_1"))
+ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_6/Face-SketchArc_10_2f-SketchLine_18f-SketchLine_19r-SketchLine_16r_wire")], model.selection(), 0, 9, [model.selection("SOLID", "ExtrusionFuse_3_1")])
+Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/From_Face"))
SketchCircle_4 = Sketch_7.addCircle(45, -35, 5)
-SketchLine_20 = Sketch_7.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_2_1/From_Face_1"))
-SketchConstraintDistance_9 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_20.result(), 10)
+SketchLine_20 = Sketch_7.addLine(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Sketch_1/SketchLine_5][ExtrusionCut_2_1/From_Face]"))
+SketchConstraintDistance_9 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_20.result(), 10, False)
SketchConstraintRadius_6 = Sketch_7.setRadius(SketchCircle_4.results()[1], "10/2")
SketchLine_21 = Sketch_7.addLine(35, -35, 45, -35)
SketchLine_21.setAuxiliary(True)
-SketchPoint_5 = Sketch_7.addPoint(model.selection("VERTEX", "ExtrusionCut_2_1/Generated_Face_1&ExtrusionCut_2_1/Generated_Face_4&ExtrusionCut_2_1/From_Face_1"))
+SketchPoint_5 = Sketch_7.addPoint(model.selection("VERTEX", "[ExtrusionCut_2_1/Generated_Face&Sketch_6/SketchLine_16][ExtrusionCut_2_1/Generated_Face&Sketch_6/SketchArc_10_2][ExtrusionCut_2_1/From_Face]"))
SketchConstraintCoincidence_42 = Sketch_7.setCoincident(SketchLine_21.startPoint(), SketchPoint_5.result())
SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_43")
SketchConstraintCoincidence_43 = Sketch_7.setCoincident(SketchCircle_4.center(), SketchLine_21.endPoint())
SketchConstraintCoincidence_43.setName("SketchConstraintCoincidence_44")
SketchConstraintHorizontal_4 = Sketch_7.setHorizontal(SketchLine_21.result())
model.do()
-ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/From_Face_1"), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
-Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"))
+ExtrusionCut_3 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_7/Face-SketchCircle_4_2r")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/From_Face"), 0, [model.selection("SOLID", "ExtrusionCut_2_1")])
+Sketch_8 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_8"))
SketchLine_22 = Sketch_8.addLine(55, 25, 5.000000000000002, 25)
SketchLine_23 = Sketch_8.addLine(5.000000000000002, 25, 5.000000000000002, 13)
SketchLine_24 = Sketch_8.addLine(5.000000000000002, 13, 55, 13)
SketchConstraintVertical_8 = Sketch_8.setVertical(SketchLine_25.result())
SketchConstraintLength_2 = Sketch_8.setLength(SketchLine_22.result(), 50)
SketchConstraintLength_3 = Sketch_8.setLength(SketchLine_25.result(), 12)
-SketchProjection_1 = Sketch_8.addProjection(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_2&ExtrusionCut_2_1/Modfied_1"))
+SketchProjection_1 = Sketch_8.addProjection(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Sketch_1/SketchLine_5][ExtrusionCut_2_1/Modified_Face&Sketch_1/SketchLine_6]"), False)
SketchLine_26 = SketchProjection_1.createdFeature()
SketchConstraintCoincidence_48 = Sketch_8.setCoincident(SketchLine_22.startPoint(), SketchLine_26.result())
SketchConstraintCoincidence_48.setName("SketchConstraintCoincidence_49")
-SketchLine_27 = Sketch_8.addLine(model.selection("EDGE", "ExtrusionCut_3_1/Modfied_2&Extrusion_1_1/Generated_Face_4"))
+SketchLine_27 = Sketch_8.addLine(model.selection("EDGE", "[ExtrusionCut_3_1/Modified_Face&Extrusion_1_1/From_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_8]"))
SketchConstraintCoincidence_49 = Sketch_8.setCoincident(SketchLine_22.startPoint(), SketchLine_27.result())
SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_50")
model.do()
-ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_22f-SketchLine_23f-SketchLine_24f-SketchLine_25f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_8"), 0, [model.selection("SOLID", "ExtrusionCut_3_1")])
-Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_1_1/Modfied_2"))
-SketchLine_28 = Sketch_9.addLine(25, -45, 18.44853578320836, -63)
-SketchLine_29 = Sketch_9.addLine(model.selection("EDGE", "ExtrusionFuse_1_1/Modfied_2&ExtrusionCut_4_1/Modfied_6"))
+ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_22r-SketchLine_23f-SketchLine_24f-SketchLine_25f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4"), 0, [model.selection("SOLID", "ExtrusionCut_3_1")])
+Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_1_1/Modified_Face&Sketch_1/SketchLine_9"))
+SketchLine_28 = Sketch_9.addLine(25, -45, 18.44853578320833, -63)
+SketchLine_29 = Sketch_9.addLine(model.selection("EDGE", "[ExtrusionFuse_1_1/Modified_Face&Sketch_1/SketchLine_9][ExtrusionCut_4_1/Modified_Face&Sketch_1/SketchLine_8]"))
SketchConstraintCoincidence_50 = Sketch_9.setCoincident(SketchLine_28.endPoint(), SketchLine_29.result())
SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_51")
-SketchLine_30 = Sketch_9.addLine(model.selection("EDGE", "ExtrusionCut_4_1/Modfied_9&ExtrusionFuse_1_1/Modfied_2"))
+SketchLine_30 = Sketch_9.addLine(model.selection("EDGE", "[ExtrusionCut_4_1/Modified_Face&Extrusion_1_1/From_Face][ExtrusionFuse_1_1/Modified_Face&Sketch_1/SketchLine_9]"))
SketchConstraintCoincidence_51 = Sketch_9.setCoincident(SketchLine_28.startPoint(), SketchLine_30.result())
SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_52")
-SketchConstraintAngle_3 = Sketch_9.setAngle(SketchLine_28.result(), SketchLine_30.result(), 20)
-SketchConstraintDistance_10 = Sketch_9.setDistance(SketchLine_28.startPoint(), SketchLine_29.result(), 18)
-SketchLine_31 = Sketch_9.addLine(18.44853578320836, -63, 25, -63)
+SketchConstraintAngle_3 = Sketch_9.setAngle(SketchLine_28.result(), SketchLine_30.result(), 20.00000000000009)
+SketchConstraintDistance_10 = Sketch_9.setDistance(SketchLine_28.startPoint(), SketchLine_29.result(), 18, False)
+SketchLine_31 = Sketch_9.addLine(18.44853578320833, -63, 25, -63)
SketchConstraintCoincidence_52 = Sketch_9.setCoincident(SketchLine_28.endPoint(), SketchLine_31.startPoint())
SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_53")
SketchConstraintCoincidence_53 = Sketch_9.setCoincident(SketchLine_29.startPoint(), SketchLine_31.endPoint())
SketchConstraintCoincidence_55 = Sketch_9.setCoincident(SketchLine_28.startPoint(), SketchLine_32.endPoint())
SketchConstraintCoincidence_55.setName("SketchConstraintCoincidence_56")
model.do()
-ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchLine_28f-SketchLine_31f-SketchLine_32f")], model.selection(), model.selection(), 0, model.selection("FACE", "ExtrusionCut_4_1/Modfied_3"), 0, [model.selection("SOLID", "ExtrusionCut_4_1")])
-Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_5_1/Modfied_1"))
+ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_9/Face-SketchLine_28r-SketchLine_31f-SketchLine_32f")], model.selection(), model.selection(), 0, model.selection("FACE", "ExtrusionCut_4_1/Modified_Face&Sketch_1/SketchLine_5"), 0, [model.selection("SOLID", "ExtrusionCut_4_1")])
+Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_5_1/Modified_Face&Sketch_1/SketchLine_8"))
SketchCircle_5 = Sketch_10.addCircle(-6.000000000000002, 4.999999999999997, 5)
-SketchLine_33 = Sketch_10.addLine(model.selection("EDGE", "ExtrusionCut_2_1/Modfied_3&ExtrusionCut_5_1/Modfied_1"))
-SketchConstraintDistance_11 = Sketch_10.setDistance(SketchCircle_5.center(), SketchLine_33.result(), 30)
-SketchLine_34 = Sketch_10.addLine(model.selection("EDGE", "ExtrusionCut_5_1/Modfied_2&ExtrusionCut_5_1/Modfied_1"))
-SketchConstraintDistance_12 = Sketch_10.setDistance(SketchCircle_5.result(), SketchLine_34.result(), 9)
+SketchLine_33 = Sketch_10.addLine(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/To_Face][ExtrusionCut_5_1/Modified_Face&Sketch_1/SketchLine_8]"))
+SketchConstraintDistance_11 = Sketch_10.setDistance(SketchCircle_5.center(), SketchLine_33.result(), 30, False)
+SketchLine_34 = Sketch_10.addLine(model.selection("EDGE", "[ExtrusionCut_5_1/Modified_Face&Sketch_1/SketchLine_9][ExtrusionCut_5_1/Modified_Face&Sketch_1/SketchLine_8]"))
+SketchConstraintDistance_12 = Sketch_10.setDistance(SketchCircle_5.result(), SketchLine_34.result(), 9, False)
SketchConstraintRadius_7 = Sketch_10.setRadius(SketchCircle_5.results()[1], "10/2")
model.do()
-ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_10/Face-SketchCircle_5_2f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face_12"), 0, [model.selection("SOLID", "ExtrusionCut_5_1")])
+ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_10/Face-SketchCircle_5_2r")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1"), 0, [model.selection("SOLID", "ExtrusionCut_5_1")])
model.do()
# Test reexecution after parameter change
