updated copyright message

[modules/shaper.git] / test.models / CSWA.py

diff --git a/test.models/CSWA.py b/test.models/CSWA.py
index 2885ff6c2a5335089aaf2afba17bd89424a4c1f3..98cd0f24c57754e387f67a6068daab51768f4f23 100644 (file)
--- a/test.models/CSWA.py
+++ b/test.models/CSWA.py
@@ -1,22 +1,21 @@
-## Copyright (C) 2014-2017  CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
+# Copyright (C) 2014-2023  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
 
 from SketchAPI import *
 
@@ -102,15 +101,15 @@ SketchConstraintCoincidence_15.setName("SketchConstraintCoincidence_16")
 SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_1.results()[1], "50/2")
 model.do()
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchCircle_1_2f_wire")], model.selection(), 0, 13, [model.selection("SOLID", "Extrusion_1_1")])
-Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "_weak_name_6_ExtrusionCut_1_1"))
-SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9][_weak_name_6_ExtrusionCut_1_1]"))
-SketchLine_11 = Sketch_3.addLine(model.selection("EDGE", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9][_weak_name_6_ExtrusionCut_1_1]"))
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&ExtrusionCut_1_1/From_Face"))
+SketchPoint_3 = Sketch_3.addPoint(model.selection("VERTEX", "ExtrusionCut_1_1/Generated_Vertex&ExtrusionCut_1_1/From_Face"))
+SketchLine_11 = Sketch_3.addLine(model.selection("EDGE", "([ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9])([Extrusion_1_1/From_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9])2([Extrusion_1_1/From_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2])2([ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9])2"))
 SketchArc_3 = Sketch_3.addArc(-15, 35.00000000000001, -15, 46.0103340429751, -17.02045759563166, 24.17663606626138, True)
 SketchConstraintCoincidence_16 = Sketch_3.setCoincident(SketchPoint_3.result(), SketchArc_3.center())
 SketchConstraintCoincidence_16.setName("SketchConstraintCoincidence_17")
 SketchConstraintCoincidence_17 = Sketch_3.setCoincident(SketchLine_11.result(), SketchArc_3.startPoint())
 SketchConstraintCoincidence_17.setName("SketchConstraintCoincidence_18")
-SketchArc_4 = Sketch_3.addArc(model.selection("EDGE", "[ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2][_weak_name_6_ExtrusionCut_1_1]"))
+SketchArc_4 = Sketch_3.addArc(model.selection("EDGE", "([ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9])([Extrusion_1_1/From_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9])2([Extrusion_1_1/From_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2])2([ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2])2"))
 SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchArc_3.endPoint(), SketchArc_4.results()[1])
 SketchConstraintCoincidence_18.setName("SketchConstraintCoincidence_19")
 SketchLine_12 = Sketch_3.addLine(-15, 46.0103340429751, -15, 35.00000000000001)
@@ -127,8 +126,8 @@ SketchConstraintCoincidence_23 = Sketch_3.setCoincident(SketchArc_3.results()[1]
 SketchConstraintCoincidence_23.setName("SketchConstraintCoincidence_24")
 model.do()
 ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [model.selection("FACE", "Sketch_3/Face-SketchArc_3_2f-SketchLine_12f-SketchArc_5_2r")], model.selection(), 5, 0, [model.selection("SOLID", "ExtrusionCut_1_1")])
-Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "(ExtrusionFuse_1_1/Generated_Face&Sketch_3/SketchArc_5_2)(ExtrusionFuse_1_1/Generated_Face&Sketch_3/SketchLine_12)(ExtrusionFuse_1_1/Generated_Face&Sketch_3/SketchArc_3_2)"))
-SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "[ExtrusionFuse_1_1/Generated_Face&Sketch_3/SketchArc_5_2][ExtrusionFuse_1_1/Generated_Face&Sketch_3/SketchLine_12][(ExtrusionFuse_1_1/Generated_Face&Sketch_3/SketchArc_5_2)(ExtrusionFuse_1_1/Generated_Face&Sketch_3/SketchLine_12)(ExtrusionFuse_1_1/Generated_Face&Sketch_3/SketchArc_3_2)]"))
+Sketch_4 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_1_1/To_Face"))
+SketchPoint_4 = Sketch_4.addPoint(model.selection("VERTEX", "[ExtrusionFuse_1_1/Generated_Face&Sketch_3/SketchArc_5_2][ExtrusionFuse_1_1/Generated_Face&Sketch_3/SketchLine_12][ExtrusionFuse_1_1/To_Face]"))
 SketchCircle_2 = Sketch_4.addCircle(-15, 35.00000000000001, 5)
 SketchConstraintCoincidence_24 = Sketch_4.setCoincident(SketchPoint_4.result(), SketchCircle_2.center())
 SketchConstraintCoincidence_24.setName("SketchConstraintCoincidence_25")
@@ -140,7 +139,7 @@ SketchArc_6 = Sketch_5.addArc(model.selection("EDGE", "[ExtrusionCut_1_1/Modifie
 SketchArc_7 = Sketch_5.addArc(-45, 35, -45, 5, -25.41666666666737, 12.27351642784166, False)
 SketchConstraintCoincidence_25 = Sketch_5.setCoincident(SketchArc_6.result(), SketchArc_7.center())
 SketchConstraintCoincidence_25.setName("SketchConstraintCoincidence_26")
-SketchCircle_3 = Sketch_5.addCircle(model.selection("EDGE", "[ExtrusionFuse_2_1/Generated_Face&Sketch_4/SketchCircle_2_2][_weak_name_6_ExtrusionFuse_2_1]"))
+SketchCircle_3 = Sketch_5.addCircle(model.selection("EDGE", "[ExtrusionFuse_2_1/Generated_Face&Sketch_4/SketchCircle_2_2][ExtrusionFuse_2_1/To_Face]"))
 SketchArc_8 = Sketch_5.addArc(-15, 35.00000000000001, -25.41666666666737, 12.27351642784166, -30.00000000000075, 14.99999999999944, True)
 SketchConstraintCoincidence_26 = Sketch_5.setCoincident(SketchCircle_3.result(), SketchArc_8.center())
 SketchConstraintCoincidence_26.setName("SketchConstraintCoincidence_27")
@@ -173,7 +172,7 @@ SketchConstraintCoincidence_35 = Sketch_6.setCoincident(SketchLine_14.result(),
 SketchConstraintCoincidence_35.setName("SketchConstraintCoincidence_36")
 SketchLine_15 = Sketch_6.addLine(model.selection("EDGE", "[ExtrusionFuse_3_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4]"))
 SketchConstraintDistance_8 = Sketch_6.setDistance(SketchArc_10.center(), SketchLine_15.result(), 35, False)
-SketchLine_16 = Sketch_6.addLine(35, 35, 35, 48)
+SketchLine_16 = Sketch_6.addLine(35, 35, 35, 47.99999999999999)
 SketchConstraintCoincidence_36 = Sketch_6.setCoincident(SketchArc_10.endPoint(), SketchLine_16.startPoint())
 SketchConstraintCoincidence_36.setName("SketchConstraintCoincidence_37")
 SketchLine_17 = Sketch_6.addLine(model.selection("EDGE", "[ExtrusionFuse_3_1/Modified_Face&Extrusion_1_1/To_Face][Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_6]"))
@@ -182,26 +181,26 @@ SketchConstraintCoincidence_37.setName("SketchConstraintCoincidence_38")
 SketchConstraintVertical_6 = Sketch_6.setVertical(SketchLine_16.result())
 SketchConstraintTangent_4 = Sketch_6.setTangent(SketchLine_16.result(), SketchArc_10.results()[1])
 SketchConstraintRadius_5 = Sketch_6.setRadius(SketchArc_10.results()[1], 20)
-SketchLine_18 = Sketch_6.addLine(55, 15, 55, 48)
+SketchLine_18 = Sketch_6.addLine(55, 15, 55, 47.99999999999999)
 SketchConstraintCoincidence_38 = Sketch_6.setCoincident(SketchArc_10.startPoint(), SketchLine_18.startPoint())
 SketchConstraintCoincidence_38.setName("SketchConstraintCoincidence_39")
 SketchConstraintCoincidence_39 = Sketch_6.setCoincident(SketchLine_14.endPoint(), SketchLine_18.endPoint())
 SketchConstraintCoincidence_39.setName("SketchConstraintCoincidence_40")
-SketchLine_19 = Sketch_6.addLine(35, 48, 55, 48)
+SketchLine_19 = Sketch_6.addLine(35, 47.99999999999999, 55, 47.99999999999999)
 SketchConstraintCoincidence_40 = Sketch_6.setCoincident(SketchLine_16.endPoint(), SketchLine_19.startPoint())
 SketchConstraintCoincidence_40.setName("SketchConstraintCoincidence_41")
 SketchConstraintCoincidence_41 = Sketch_6.setCoincident(SketchLine_14.endPoint(), SketchLine_19.endPoint())
 SketchConstraintCoincidence_41.setName("SketchConstraintCoincidence_42")
 model.do()
 ExtrusionCut_2 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_6/Face-SketchArc_10_2f-SketchLine_18f-SketchLine_19r-SketchLine_16r_wire")], model.selection(), 0, 9, [model.selection("SOLID", "ExtrusionFuse_3_1")])
-Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "_weak_name_30_ExtrusionCut_2_1"))
+Sketch_7 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_2_1/From_Face"))
 SketchCircle_4 = Sketch_7.addCircle(45, -35, 5)
-SketchLine_20 = Sketch_7.addLine(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Sketch_1/SketchLine_5][_weak_name_30_ExtrusionCut_2_1]"))
+SketchLine_20 = Sketch_7.addLine(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Sketch_1/SketchLine_5][ExtrusionCut_2_1/From_Face]"))
 SketchConstraintDistance_9 = Sketch_7.setDistance(SketchCircle_4.center(), SketchLine_20.result(), 10, False)
 SketchConstraintRadius_6 = Sketch_7.setRadius(SketchCircle_4.results()[1], "10/2")
 SketchLine_21 = Sketch_7.addLine(35, -35, 45, -35)
 SketchLine_21.setAuxiliary(True)
-SketchPoint_5 = Sketch_7.addPoint(model.selection("VERTEX", "[ExtrusionCut_2_1/Generated_Face&Sketch_6/SketchLine_16][ExtrusionCut_2_1/Generated_Face&Sketch_6/SketchArc_10_2][_weak_name_30_ExtrusionCut_2_1]"))
+SketchPoint_5 = Sketch_7.addPoint(model.selection("VERTEX", "[ExtrusionCut_2_1/Generated_Face&Sketch_6/SketchLine_16][ExtrusionCut_2_1/Generated_Face&Sketch_6/SketchArc_10_2][ExtrusionCut_2_1/From_Face]"))
 SketchConstraintCoincidence_42 = Sketch_7.setCoincident(SketchLine_21.startPoint(), SketchPoint_5.result())
 SketchConstraintCoincidence_42.setName("SketchConstraintCoincidence_43")
 SketchConstraintCoincidence_43 = Sketch_7.setCoincident(SketchCircle_4.center(), SketchLine_21.endPoint())
@@ -238,16 +237,16 @@ SketchConstraintCoincidence_49.setName("SketchConstraintCoincidence_50")
 model.do()
 ExtrusionCut_4 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_8/Face-SketchLine_22r-SketchLine_23f-SketchLine_24f-SketchLine_25f")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_4"), 0, [model.selection("SOLID", "ExtrusionCut_3_1")])
 Sketch_9 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionFuse_1_1/Modified_Face&Sketch_1/SketchLine_9"))
-SketchLine_28 = Sketch_9.addLine(25, -45, 18.44853578320836, -63)
+SketchLine_28 = Sketch_9.addLine(25, -45, 18.44853578320833, -63)
 SketchLine_29 = Sketch_9.addLine(model.selection("EDGE", "[ExtrusionFuse_1_1/Modified_Face&Sketch_1/SketchLine_9][ExtrusionCut_4_1/Modified_Face&Sketch_1/SketchLine_8]"))
 SketchConstraintCoincidence_50 = Sketch_9.setCoincident(SketchLine_28.endPoint(), SketchLine_29.result())
 SketchConstraintCoincidence_50.setName("SketchConstraintCoincidence_51")
 SketchLine_30 = Sketch_9.addLine(model.selection("EDGE", "[ExtrusionCut_4_1/Modified_Face&Extrusion_1_1/From_Face][ExtrusionFuse_1_1/Modified_Face&Sketch_1/SketchLine_9]"))
 SketchConstraintCoincidence_51 = Sketch_9.setCoincident(SketchLine_28.startPoint(), SketchLine_30.result())
 SketchConstraintCoincidence_51.setName("SketchConstraintCoincidence_52")
-SketchConstraintAngle_3 = Sketch_9.setAngle(SketchLine_28.result(), SketchLine_30.result(), 20)
-SketchConstraintDistance_10 = Sketch_9.setDistance(SketchLine_28.startPoint(), SketchLine_29.result(), 18)
-SketchLine_31 = Sketch_9.addLine(18.44853578320836, -63, 25, -63)
+SketchConstraintAngle_3 = Sketch_9.setAngle(SketchLine_28.result(), SketchLine_30.result(), 20.00000000000009)
+SketchConstraintDistance_10 = Sketch_9.setDistance(SketchLine_28.startPoint(), SketchLine_29.result(), 18, False)
+SketchLine_31 = Sketch_9.addLine(18.44853578320833, -63, 25, -63)
 SketchConstraintCoincidence_52 = Sketch_9.setCoincident(SketchLine_28.endPoint(), SketchLine_31.startPoint())
 SketchConstraintCoincidence_52.setName("SketchConstraintCoincidence_53")
 SketchConstraintCoincidence_53 = Sketch_9.setCoincident(SketchLine_29.startPoint(), SketchLine_31.endPoint())
@@ -262,9 +261,9 @@ ExtrusionCut_5 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Ske
 Sketch_10 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_5_1/Modified_Face&Sketch_1/SketchLine_8"))
 SketchCircle_5 = Sketch_10.addCircle(-6.000000000000002, 4.999999999999997, 5)
 SketchLine_33 = Sketch_10.addLine(model.selection("EDGE", "[ExtrusionCut_2_1/Modified_Face&Extrusion_1_1/To_Face][ExtrusionCut_5_1/Modified_Face&Sketch_1/SketchLine_8]"))
-SketchConstraintDistance_11 = Sketch_10.setDistance(SketchCircle_5.center(), SketchLine_33.result(), 30)
+SketchConstraintDistance_11 = Sketch_10.setDistance(SketchCircle_5.center(), SketchLine_33.result(), 30, False)
 SketchLine_34 = Sketch_10.addLine(model.selection("EDGE", "[ExtrusionCut_5_1/Modified_Face&Sketch_1/SketchLine_9][ExtrusionCut_5_1/Modified_Face&Sketch_1/SketchLine_8]"))
-SketchConstraintDistance_12 = Sketch_10.setDistance(SketchCircle_5.result(), SketchLine_34.result(), 9)
+SketchConstraintDistance_12 = Sketch_10.setDistance(SketchCircle_5.result(), SketchLine_34.result(), 9, False)
 SketchConstraintRadius_7 = Sketch_10.setRadius(SketchCircle_5.results()[1], "10/2")
 model.do()
 ExtrusionCut_6 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_10/Face-SketchCircle_5_2r")], model.selection(), model.selection(), 0, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_1"), 0, [model.selection("SOLID", "ExtrusionCut_5_1")])