+# Copyright (C) 2014-2023 CEA, EDF
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+
"""
-Test case for Scale feature.
+Test case for Scale feature.
Written on High API.
"""
-from ModelAPI import *
-from GeomAPI import *
-
from salome.shaper import model
-# Get session
-aSession = ModelAPI_Session.get()
-
-# Create a part
-aDocument = aSession.activeDocument()
-aSession.startOperation()
-model.addPart(aDocument)
-aDocument = aSession.activeDocument()
-aSession.finishOperation()
-
-# Create a box
-aSession.startOperation()
-aCenterPoint = model.addPoint(aDocument, 20, 20, 0).result()
-aBox1 = model.addBox(aDocument, 10, 10, 10)
-aBox2 = model.addBox(aDocument, 10, 10, 10)
-aSession.finishOperation()
-
-# Perform a symmetry by a point
-aSession.startOperation()
-aScale1 = model.addScale(aDocument, [model.selection("SOLID", "Box_1_1")], aCenterPoint, 2.0).result()
-aSession.finishOperation()
-assert (aScale1 is not None)
-
-# Perform a symmetry by an axis
-aSession.startOperation()
-aScale2 = model.addScale(aDocument, [model.selection("SOLID", "Box_2_1")], aCenterPoint, -0.5, 2, 3.7).result()
-aSession.finishOperation()
-assert (aScale2 is not None)
\ No newline at end of file
+model.begin()
+partSet = model.moduleDocument()
+Part_1 = model.addPart(partSet)
+Part_1_doc = Part_1.document()
+
+# Create Boxes
+Box_1 = model.addBox(Part_1_doc, 10, 10, 10)
+Box_2 = model.addBox(Part_1_doc, 10, 10, 10)
+Box_3 = model.addBox(Part_1_doc, 10, 10, 10)
+Box_4 = model.addBox(Part_1_doc, 10, 10, 10)
+Box_5 = model.addBox(Part_1_doc, 10, 10, 10)
+Box_6 = model.addBox(Part_1_doc, 10, 10, 10)
+Box_7 = model.addBox(Part_1_doc, 10, 10, 10)
+Box_8 = model.addBox(Part_1_doc, 10, 10, 10)
+Box_9 = model.addBox(Part_1_doc, 10, 10, 10)
+Box_10 = model.addBox(Part_1_doc, 10, 10, 10)
+Box_11 = model.addBox(Part_1_doc, 10, 10, 10)
+Box_12 = model.addBox(Part_1_doc, 10, 10, 10)
+Box_13 = model.addBox(Part_1_doc, 10, 10, 10)
+Box_14 = model.addBox(Part_1_doc, 10, 10, 10)
+Box_15 = model.addBox(Part_1_doc, 10, 10, 10)
+Box_16 = model.addBox(Part_1_doc, 10, 10, 10)
+Box_17 = model.addBox(Part_1_doc, 10, 10, 10)
+Box_18 = model.addBox(Part_1_doc, 10, 10, 10)
+
+# Create Sketches
+Sketch_1 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_1 = Sketch_1.addLine(11.50379459310504, -12.39258082761096, 58.75227313132206, 54.23988890577205)
+
+Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
+SketchLine_2 = Sketch_2.addLine(41.58300156386008, 83.65088639460937, -69.84532559339473, 11.87498196448581)
+SketchLine_3 = Sketch_2.addLine(-69.84532559339473, 11.87498196448581, -47.25850252097817, -30.78901717230093)
+SketchLine_4 = Sketch_2.addLine(-47.25850252097817, -30.78901717230093, 108.3396119778911, -36.812169991612)
+SketchLine_5 = Sketch_2.addLine(108.3396119778911, -36.812169991612, 35.05791934293975, 16.39234657896911)
+SketchLine_6 = Sketch_2.addLine(35.05791934293975, 16.39234657896911, 41.58300156386008, 83.65088639460937)
+SketchConstraintCoincidence_1 = Sketch_2.setCoincident(SketchLine_2.endPoint(), SketchLine_3.startPoint())
+SketchConstraintCoincidence_2 = Sketch_2.setCoincident(SketchLine_3.endPoint(), SketchLine_4.startPoint())
+SketchConstraintCoincidence_3 = Sketch_2.setCoincident(SketchLine_4.endPoint(), SketchLine_5.startPoint())
+SketchConstraintCoincidence_4 = Sketch_2.setCoincident(SketchLine_5.endPoint(), SketchLine_6.startPoint())
+SketchConstraintCoincidence_5 = Sketch_2.setCoincident(SketchLine_2.startPoint(), SketchLine_6.endPoint())
+model.do()
+
+# Create Points
+Point_1 = model.addPoint(Part_1_doc, -10, -10, -10)
+
+# Create Vertexes
+Vertex_1 = model.addVertex(Part_1_doc, [model.selection("VERTEX", "Sketch_1/SketchLine_1_EndVertex")])
+
+# Create Wire & Extrusion
+Wire_1 = model.addWire(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchLine_2r-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f_wire")])
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("WIRE", "Wire_1_1")], model.selection(), 50, 0)
+
+# Create Scales
+Scale_1 = model.addScale(Part_1_doc, [model.selection("SOLID", "Box_1_1")] , model.selection("VERTEX", "PartSet/Origin"), 2)
+Scale_2 = model.addScale(Part_1_doc, [model.selection("SOLID", "Box_2_1")] , model.selection("VERTEX", "Point_1"), 2)
+Scale_3 = model.addScale(Part_1_doc, [model.selection("SOLID", "Box_3_1")] , model.selection("VERTEX", "[Box_3_1/Back][Box_3_1/Left][Box_3_1/Top]"), 2)
+Scale_4 = model.addScale(Part_1_doc, [model.selection("SOLID", "Box_4_1")] , model.selection("VERTEX", "Sketch_1/SketchLine_1_EndVertex"), 2)
+Scale_5 = model.addScale(Part_1_doc, [model.selection("SOLID", "Box_5_1")] , model.selection("VERTEX", "Vertex_1_1"), 2)
+Scale_6 = model.addScale(Part_1_doc, [model.selection("SOLID", "Box_6_1")] , model.selection("VERTEX", "PartSet/Origin"), 0)
+Scale_7 = model.addScale(Part_1_doc, [model.selection("SOLID", "Box_7_1")] , model.selection("VERTEX", "PartSet/Origin"), -3)
+Scale_8 = model.addScale(Part_1_doc, [model.selection("SOLID", "Box_8_1")] , model.selection("VERTEX", "InvalidName"), 2)
+Scale_9 = model.addScale(Part_1_doc, [model.selection("SOLID", "Box_9_1")] , model.selection("VERTEX", "PartSet/Origin"), 2 , 3, 1)
+Scale_10 = model.addScale(Part_1_doc, [model.selection("SOLID", "Box_10_1")] , model.selection("VERTEX", "Point_1"), 2 , 3, 1)
+Scale_11 = model.addScale(Part_1_doc, [model.selection("SOLID", "Box_11_1")] , model.selection("VERTEX", "[Box_11_1/Back][Box_11_1/Right][Box_11_1/Top]"), 2 , 3, 1)
+Scale_12 = model.addScale(Part_1_doc, [model.selection("SOLID", "Box_12_1")] , model.selection("VERTEX", "Sketch_1/SketchLine_1_EndVertex"), 2 , 3, 1)
+Scale_13 = model.addScale(Part_1_doc, [model.selection("SOLID", "Box_13_1")] , model.selection("VERTEX", "Vertex_1_1"), 2 , 3, 1)
+Scale_14 = model.addScale(Part_1_doc, [model.selection("SOLID", "Box_14_1")] , model.selection("VERTEX", "PartSet/Origin"), 0 , 3, 1)
+Scale_15 = model.addScale(Part_1_doc, [model.selection("SOLID", "Box_15_1")] , model.selection("VERTEX", "PartSet/Origin"), 2 , 0, 1)
+Scale_16 = model.addScale(Part_1_doc, [model.selection("SOLID", "Box_16_1")] , model.selection("VERTEX", "PartSet/Origin"), 2 , 3, 0)
+Scale_17 = model.addScale(Part_1_doc, [model.selection("SOLID", "Box_17_1")] , model.selection("VERTEX", "PartSet/Origin"), -2 , -3, -0.5)
+Scale_18 = model.addScale(Part_1_doc, [model.selection("SOLID", "Box_18_1")] , model.selection("VERTEX", "InvalidName"), 2 , 3, 1)
+Scale_19 = model.addScale(Part_1_doc, [model.selection("SHELL", "Extrusion_1_1")] , model.selection("VERTEX", "PartSet/Origin"), 5)
+
+model.do()
+model.end()
+
+
+# Checks
+from GeomAPI import GeomAPI_Shape
+
+model.testNbResults(Scale_1, 1)
+model.testNbSubResults(Scale_1, [0])
+model.testNbSubShapes(Scale_1, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Scale_1, GeomAPI_Shape.FACE, [6])
+model.testHaveNamingFaces(Scale_1, model, Part_1_doc)
+
+model.testNbResults(Scale_2, 1)
+model.testNbSubResults(Scale_2, [0])
+model.testNbSubShapes(Scale_2, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Scale_2, GeomAPI_Shape.FACE, [6])
+model.testHaveNamingFaces(Scale_2, model, Part_1_doc)
+
+model.testNbResults(Scale_3, 1)
+model.testNbSubResults(Scale_3, [0])
+model.testNbSubShapes(Scale_3, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Scale_3, GeomAPI_Shape.FACE, [6])
+model.testHaveNamingFaces(Scale_3, model, Part_1_doc)
+
+model.testNbResults(Scale_4, 1)
+model.testNbSubResults(Scale_4, [0])
+model.testNbSubShapes(Scale_4, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Scale_4, GeomAPI_Shape.FACE, [6])
+model.testHaveNamingFaces(Scale_4, model, Part_1_doc)
+
+model.testNbResults(Scale_5, 1)
+model.testNbSubResults(Scale_5, [0])
+model.testNbSubShapes(Scale_5, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Scale_5, GeomAPI_Shape.FACE, [6])
+model.testHaveNamingFaces(Scale_5, model, Part_1_doc)
+
+model.testNbResults(Scale_7, 1)
+model.testNbSubResults(Scale_7, [0])
+model.testNbSubShapes(Scale_7, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Scale_7, GeomAPI_Shape.FACE, [6])
+model.testHaveNamingFaces(Scale_7, model, Part_1_doc)
+
+model.testNbResults(Scale_9, 1)
+model.testNbSubResults(Scale_9, [0])
+model.testNbSubShapes(Scale_9, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Scale_9, GeomAPI_Shape.FACE, [6])
+model.testHaveNamingFaces(Scale_9, model, Part_1_doc)
+
+model.testNbResults(Scale_10, 1)
+model.testNbSubResults(Scale_10, [0])
+model.testNbSubShapes(Scale_10, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Scale_10, GeomAPI_Shape.FACE, [6])
+model.testHaveNamingFaces(Scale_10, model, Part_1_doc)
+
+model.testNbResults(Scale_11, 1)
+model.testNbSubResults(Scale_11, [0])
+model.testNbSubShapes(Scale_11, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Scale_11, GeomAPI_Shape.FACE, [6])
+model.testHaveNamingFaces(Scale_11, model, Part_1_doc)
+
+model.testNbResults(Scale_12, 1)
+model.testNbSubResults(Scale_12, [0])
+model.testNbSubShapes(Scale_12, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Scale_12, GeomAPI_Shape.FACE, [6])
+model.testHaveNamingFaces(Scale_12, model, Part_1_doc)
+
+model.testNbResults(Scale_13, 1)
+model.testNbSubResults(Scale_13, [0])
+model.testNbSubShapes(Scale_13, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Scale_13, GeomAPI_Shape.FACE, [6])
+model.testHaveNamingFaces(Scale_13, model, Part_1_doc)
+
+model.testNbResults(Scale_17, 1)
+model.testNbSubResults(Scale_17, [0])
+model.testNbSubShapes(Scale_17, GeomAPI_Shape.SOLID, [1])
+model.testNbSubShapes(Scale_17, GeomAPI_Shape.FACE, [6])
+model.testHaveNamingFaces(Scale_17, model, Part_1_doc)
+
+
+model.testNbResults(Scale_6, 0)
+assert(Scale_6.feature().error() == 'Error: Scale algorithm failed. Scale builder :: the scale factor is null.')
+
+model.testNbResults(Scale_8, 0)
+assert(Scale_8.feature().error() == 'Attribute "center_point" is not initialized.')
+
+model.testNbResults(Scale_14, 0)
+assert(Scale_14.feature().error() == 'Error: Scale algorithm failed. Scale builder :: the scale factor in X is null.')
+
+model.testNbResults(Scale_15, 0)
+assert(Scale_15.feature().error() == 'Error: Scale algorithm failed. Scale builder :: the scale factor in Y is null.')
+
+model.testNbResults(Scale_16, 0)
+assert(Scale_16.feature().error() == 'Error: Scale algorithm failed. Scale builder :: the scale factor in Z is null.')
+
+model.testNbResults(Scale_18, 0)
+assert(Scale_18.feature().error() == 'Attribute "center_point" is not initialized.')
+
+# To uncomment when #2046 will be performed
+#model.testNbResults(Scale_19, 1)
+#model.testNbSubResults(Scale_19, [0])
+#model.testNbSubShapes(Scale_19, GeomAPI_Shape.SHELL, [1])
+#model.testNbSubShapes(Scale_19, GeomAPI_Shape.SOLID, [0])
+#model.testNbSubShapes(Scale_19, GeomAPI_Shape.FACE, [5])
+#model.testHaveNamingFaces(Scale_19, model, Part_1_doc)
