#include "XGUI_ModuleConnector.h"
#include "XGUI_Workshop.h"
#include "XGUI_ErrorMgr.h"
-#include <XGUI_ObjectsBrowser.h>
+#include "XGUI_Tools.h"
+#include "XGUI_ObjectsBrowser.h"
+#include "XGUI_ContextMenuMgr.h"
#include <ModuleBase_IPropertyPanel.h>
#include <ModuleBase_ModelWidget.h>
#include <XGUI_PropertyPanel.h>
#include <QToolButton>
+#include <QLineEdit>
#include <QMessageBox>
#include <QApplication>
}
~XGUI_ShortCutListener() {}
+ /// Switch on short cut listener
+ void setActive(const bool theIsActive) { myIsActive = theIsActive; }
+
/// Redefinition of virtual function to process Delete key release
virtual bool eventFilter(QObject *theObject, QEvent *theEvent)
{
bool isAccepted = false;
- if (theEvent->type() == QEvent::KeyRelease) {
+ if (myIsActive && theEvent->type() == QEvent::KeyRelease) {
QKeyEvent* aKeyEvent = dynamic_cast<QKeyEvent*>(theEvent);
- if(aKeyEvent) {
+ if (aKeyEvent) {
switch (aKeyEvent->key()) {
- case Qt::Key_Delete: {
+ case Qt::Key_Delete:
isAccepted = myOperationMgr->onProcessDelete(theObject);
- }
+ break;
+ default:
+ isAccepted = myOperationMgr->onKeyReleased(theObject, aKeyEvent);
+ break;
}
}
}
private:
XGUI_OperationMgr* myOperationMgr; /// processor for key event
+ bool myIsActive; /// boolean state whether the event filter perform own signal processing
};
XGUI_OperationMgr::XGUI_OperationMgr(QObject* theParent,
/// we need to install filter to the application in order to react to 'Delete' key button
/// this key can not be a short cut for a corresponded action because we need to set
/// the actions priority
- XGUI_ShortCutListener* aShortCutListener = new XGUI_ShortCutListener(theParent, this);
+ myShortCutListener = new XGUI_ShortCutListener(theParent, this);
}
XGUI_OperationMgr::~XGUI_OperationMgr()
{
}
+void XGUI_OperationMgr::activate()
+{
+ myShortCutListener->setActive(true);
+}
+
+void XGUI_OperationMgr::deactivate()
+{
+ myShortCutListener->setActive(false);
+}
+
ModuleBase_Operation* XGUI_OperationMgr::currentOperation() const
{
return myOperations.count() > 0 ? myOperations.last() : 0;
ModuleBase_Operation* XGUI_OperationMgr::findOperation(const QString& theId) const
{
- foreach(ModuleBase_Operation* aOp, myOperations) {
- if (aOp->id() == theId)
- return aOp;
+ QList<ModuleBase_Operation*>::const_iterator anIt = myOperations.end();
+ while (anIt != myOperations.begin()) {
+ --anIt;
+ ModuleBase_Operation* anOperation = *anIt;
+ if (anOperation->id() == theId)
+ return anOperation;
}
return 0;
}
{
QStringList result;
foreach(ModuleBase_Operation* eachOperation, myOperations) {
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(eachOperation);
+ ModuleBase_OperationFeature* aFOperation =
+ dynamic_cast<ModuleBase_OperationFeature*>(eachOperation);
if (aFOperation) {
FeaturePtr aFeature = aFOperation->feature();
if(aFeature) {
return myOperations.at(idx - 1);
}
-bool XGUI_OperationMgr::eventFilter(QObject *theObject, QEvent *theEvent)
-{
- bool isAccepted = false;
- if (theEvent->type() == QEvent::KeyRelease) {
- QKeyEvent* aKeyEvent = dynamic_cast<QKeyEvent*>(theEvent);
- if(aKeyEvent)
- isAccepted = onKeyReleased(theObject, aKeyEvent);
- }
- if (!isAccepted)
- isAccepted = QObject::eventFilter(theObject, theEvent);
-
- return isAccepted;
-}
-
bool XGUI_OperationMgr::startOperation(ModuleBase_Operation* theOperation)
{
if (hasOperation())
connect(theOperation, SIGNAL(stopped()), SLOT(onOperationStopped()));
connect(theOperation, SIGNAL(resumed()), SLOT(onOperationResumed()));
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
- (theOperation);
- if (aFOperation)
- connect(aFOperation, SIGNAL(activatedByPreselection()),
- SIGNAL(operationActivatedByPreselection()));
bool isStarted = theOperation->start();
if (isStarted)
bool XGUI_OperationMgr::commitAllOperations()
{
- bool isCompositeCommitted = false;
+ bool isCompositeCommitted = false, anOperationProcessed = false;
while (hasOperation()) {
ModuleBase_Operation* anOperation = currentOperation();
- if (workshop()->errorMgr()->isApplyEnabled()) {
- onCommitOperation();
+ if (XGUI_Tools::workshop(myWorkshop)->errorMgr()->isApplyEnabled()) {
+ anOperationProcessed = onCommitOperation();
} else {
abortOperation(anOperation);
+ anOperationProcessed = true;
}
ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
(anOperation);
if (aFOperation) {
FeaturePtr aFeature = aFOperation->feature();
- CompositeFeaturePtr aComposite =
+ CompositeFeaturePtr aComposite =
std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aFeature);
isCompositeCommitted = aComposite.get();
if (isCompositeCommitted)
break;
}
+ // not processed[committed] operation might be used in composite feature,
+ // so the while will be stopped by the previous check.
+ // this code is not necessary, but logically should be done when the processing will not
+ // be done for not composite feature by some reasons
+ if (!anOperationProcessed)
+ break;
}
return true;
}
ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>
(currentOperation());
if(aFOperation && aFOperation->feature().get())
- workshop()->errorMgr()->updateActions(aFOperation->feature());
+ XGUI_Tools::workshop(myWorkshop)->errorMgr()->updateActions(aFOperation->feature());
}
void XGUI_OperationMgr::updateApplyOfOperations(ModuleBase_Operation* theOperation)
{
- XGUI_ErrorMgr* anErrorMgr = workshop()->errorMgr();
+ XGUI_ErrorMgr* anErrorMgr = XGUI_Tools::workshop(myWorkshop)->errorMgr();
if (theOperation) {
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
+ ModuleBase_OperationFeature* aFOperation =
+ dynamic_cast<ModuleBase_OperationFeature*>(theOperation);
if (aFOperation)
anErrorMgr->updateAcceptAllAction(aFOperation->feature());
}
updateApplyOfOperations(anOperation);
}
}
+ // Apply button of the current operation should also be updated
+ onValidateOperation();
}
bool XGUI_OperationMgr::canStopOperation(ModuleBase_Operation* theOperation)
bool XGUI_OperationMgr::commitOperation()
{
- if (hasOperation() && currentOperation()->isValid()) {
- onCommitOperation();
- return true;
- }
- return false;
+ //if (hasOperation() && currentOperation()->isValid()) {
+ // onCommitOperation();
+ // return true;
+ //}
+ //return false;
+ return onCommitOperation();
}
void XGUI_OperationMgr::resumeOperation(ModuleBase_Operation* theOperation)
DocumentPtr aDoc = aMgr->activeDocument();
bool aIsOp = aMgr->isOperation();
if (!aIsOp)
- aMgr->startOperation();
+ aMgr->startOperation(QString("Set current feature: %1")
+ .arg(theFeature->getKind().c_str()).toStdString());
aDoc->setCurrentFeature(theFeature, false);
+#ifdef DEBUG_CURRENT_FEATURE
+ qDebug(QString(" document->setCurrentFeature(false) = %1 SET").arg(
+ ModuleBase_Tools::objectName(
+ ModelAPI_Session::get()->activeDocument()->currentFeature(false))).toStdString().c_str());
+#endif
+
if (!aIsOp)
aMgr->finishOperation();
}
-bool XGUI_OperationMgr::canStartOperation(const QString& theId)
+bool XGUI_OperationMgr::canStartOperation(const QString& theId, bool& isCommitted)
{
bool aCanStart = true;
+ isCommitted = false;
ModuleBase_Operation* aCurrentOp = currentOperation();
if (aCurrentOp) {
bool aGranted = aCurrentOp->isGranted(theId);
}
else if (canStopOperation(aCurrentOp)) {
// the started operation is granted in the parrent operation,
- // e.g. current - Line in Sketch, started Circle
- if (workshop()->errorMgr()->isApplyEnabled() && aCurrentOp->isModified())
- aCurrentOp->commit();
- else
- abortOperation(aCurrentOp);
+ // e.g. current - Line in Sketch, started Circle
+ stopOperation(aCurrentOp, isCommitted);
} else {
aCanStart = false;
}
return aCanStart;
}
+void XGUI_OperationMgr::stopOperation(ModuleBase_Operation* theOperation, bool& isCommitted)
+{
+ if (XGUI_Tools::workshop(myWorkshop)->errorMgr()->isApplyEnabled() && theOperation->isModified())
+ isCommitted = theOperation->commit();
+ else {
+ isCommitted = false;
+ abortOperation(theOperation);
+ }
+}
+
void XGUI_OperationMgr::abortOperation(ModuleBase_Operation* theOperation)
{
ModuleBase_Operation* aCurrentOperation = currentOperation();
}
}
-void XGUI_OperationMgr::onCommitOperation()
+bool XGUI_OperationMgr::onCommitOperation()
{
+ bool isCommitted = false;
ModuleBase_Operation* anOperation = currentOperation();
- if (anOperation)
- anOperation->commit();
+ if (anOperation && myWorkshop->module()->canCommitOperation())
+ isCommitted = anOperation->commit();
+ return isCommitted;
}
void XGUI_OperationMgr::onAbortOperation()
return;
/// Set current feature and remeber old current feature
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(aCurrentOperation);
+ ModuleBase_OperationFeature* aFOperation =
+ dynamic_cast<ModuleBase_OperationFeature*>(aCurrentOperation);
if (aFOperation) {
SessionPtr aMgr = ModelAPI_Session::get();
DocumentPtr aDoc = aMgr->activeDocument();
- // the parameter of current feature should be false, we should use all feature, not only visible
- // in order to correctly save the previous feature of the nested operation, where the
+ // the parameter of current feature should be false, we should use all feature, not only
+ // visible in order to correctly save the previous feature of the nested operation, where the
// features can be not visible in the tree. The problem case is Edit sketch entitity(line)
// in the Sketch, created in ExtrusionCut operation. The entity disappears by commit.
// When sketch entity operation started, the sketch should be cashed here as the current.
// Otherwise(the flag is true), the ExtrusionCut is cashed, when commit happens, the sketch
// is disabled, sketch entity is disabled as extrusion cut is created earliest then sketch.
- // As a result the sketch disappears from the viewer. However after commit it is displayed back.
+ // As a result the sketch disappears from the viewer.
+ // However after commit it is displayed back.
aFOperation->setPreviousCurrentFeature(aDoc->currentFeature(false));
#ifdef DEBUG_CURRENT_FEATURE
FeaturePtr aFeature = aFOperation->feature();
QString aKind = aFeature ? aFeature->getKind().c_str() : "";
- qDebug(QString("onBeforeOperationStarted(), edit operation = %1, feature = %2")
+ qDebug("");
+ qDebug(QString("onBeforeOperationStarted() isEditOperation = %1, feature = %2")
.arg(aFOperation->isEditOperation())
- .arg(ModuleBase_Tools::objectInfo(aFeature)).toStdString().c_str());
-
- qDebug(QString("\tdocument->currentFeature(false) = %1").arg(
- ModuleBase_Tools::objectInfo(ModelAPI_Session::get()->activeDocument()->currentFeature(false))).toStdString().c_str());
+ .arg(ModuleBase_Tools::objectName(aFeature)).toStdString().c_str());
+ qDebug(QString(" document->currentFeature(false) = %1 : DO: setPreviousCurrentFeature").arg(
+ ModuleBase_Tools::objectName(aDoc->currentFeature(false))).toStdString().c_str());
#endif
- if (aFOperation->isEditOperation()) // it should be performed by the feature edit only
+ if (aFOperation->isEditOperation()) {// it should be performed by the feature edit only
// in create operation, the current feature is changed by addFeature()
aDoc->setCurrentFeature(aFOperation->feature(), false);
-
#ifdef DEBUG_CURRENT_FEATURE
- qDebug("\tdocument->setCurrentFeature");
- qDebug(QString("\tdocument->currentFeature(false) = %1").arg(
- ModuleBase_Tools::objectInfo(ModelAPI_Session::get()->activeDocument()->currentFeature(false))).toStdString().c_str());
+ qDebug(QString(" document->setCurrentFeature(false) = %1").arg(
+ ModuleBase_Tools::objectName(aDoc->currentFeature(false))).toStdString().c_str());
#endif
- ModuleBase_IModule* aModule = myWorkshop->module();
- if (aModule)
- aModule->beforeOperationStarted(aFOperation);
+ // this is the only place where flushes must be called after setCurrentFeature for the
+ // current moment: after this the opertion is not finished, so, the ObjectBrowser
+ // state may be corrupted (issue #1457)
+ static Events_Loop* aLoop = Events_Loop::loop();
+ static Events_ID aCreateEvent = aLoop->eventByName(EVENT_OBJECT_CREATED);
+ aLoop->flush(aCreateEvent);
+ static Events_ID aDeleteEvent = aLoop->eventByName(EVENT_OBJECT_DELETED);
+ aLoop->flush(aDeleteEvent);
+ }
}
}
{
ModuleBase_Operation* aSenderOperation = dynamic_cast<ModuleBase_Operation*>(sender());
updateApplyOfOperations(aSenderOperation);
- emit operationStarted(aSenderOperation);
+ XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myWorkshop);
+ aWorkshop->operationStarted(aSenderOperation);
}
void XGUI_OperationMgr::onBeforeOperationAborted()
return;
/// Restore the previous current feature
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(aCurrentOperation);
+ ModuleBase_OperationFeature* aFOperation =
+ dynamic_cast<ModuleBase_OperationFeature*>(aCurrentOperation);
if (aFOperation) {
#ifdef DEBUG_CURRENT_FEATURE
QString aKind = aFOperation->feature()->getKind().c_str();
- qDebug(QString("onBeforeOperationCommitted(), edit operation = %1, feature = %2")
+ qDebug(QString("onBeforeOperationCommitted() isEditOperation = %1, feature = %2")
.arg(aFOperation->isEditOperation())
- .arg(ModuleBase_Tools::objectInfo(aFOperation->feature())).toStdString().c_str());
-
- qDebug(QString("\tdocument->currentFeature(false) = %1").arg(
- ModuleBase_Tools::objectInfo(ModelAPI_Session::get()->activeDocument()->currentFeature(false))).toStdString().c_str());
+ .arg(ModuleBase_Tools::objectName(aFOperation->feature())).toStdString().c_str());
+ qDebug(QString(" document->currentFeature(false) = %1").arg(
+ ModuleBase_Tools::objectName(
+ ModelAPI_Session::get()->activeDocument()->currentFeature(false)))
+ .toStdString().c_str());
#endif
if (aFOperation->isEditOperation()) {
setCurrentFeature(aFOperation->previousCurrentFeature());
}
else { // create operation
- // the Top created feature should stays the current. In nested operations, like Line in the Sketch or
- // Sketch in ExtrusionCut, a previous feature should be restored on commit. It is performed here
+ // the Top created feature should stays the current. In nested operations,
+ // like Line in the Sketch or
+ // Sketch in ExtrusionCut, a previous feature should be restored on commit.
+ // It is performed here
// in order to perform it in the current transaction without opening a new one.
if (myOperations.front() != aFOperation)
setCurrentFeature(aFOperation->previousCurrentFeature());
}
-#ifdef DEBUG_CURRENT_FEATURE
- qDebug("\tdocument->setCurrentFeature");
- qDebug(QString("\tdocument->currentFeature(false) = %1").arg(
- ModuleBase_Tools::objectInfo(ModelAPI_Session::get()->activeDocument()->currentFeature(false))).toStdString().c_str());
-#endif
ModuleBase_IModule* aModule = myWorkshop->module();
if (aModule)
aModule->beforeOperationStopped(aFOperation);
ModuleBase_Operation* anOperation = currentOperation();
bool isAccepted = false;
switch (theEvent->key()) {
+ case Qt::Key_Escape: {
+ ModuleBase_Operation* aOperation = currentOperation();
+ if (aOperation) {
+ onAbortOperation();
+ isAccepted = true;
+ }
+ }
+ break;
+ case Qt::Key_Tab:
+ case Qt::Key_Backtab:
+ {
+ ModuleBase_Operation* aOperation = currentOperation();
+ if (aOperation) {
+ ModuleBase_IPropertyPanel* aPanel = anOperation->propertyPanel();
+ if (aPanel) {
+ QWidget* aFocusedWidget = qApp->focusWidget();
+ bool isPPChildObject = aFocusedWidget && isChildObject(aFocusedWidget, aPanel);
+ if (!isPPChildObject) {
+ // check for case when the operation is started but property panel is not filled
+ XGUI_PropertyPanel* aPP = dynamic_cast<XGUI_PropertyPanel*>(aPanel);
+ aPP->setFocusNextPrevChild(theEvent->key() == Qt::Key_Tab);
+ isAccepted = true;
+ }
+ }
+ }
+ }
+ break;
case Qt::Key_Return:
case Qt::Key_Enter: {
isAccepted = onProcessEnter(theObject);
{
bool isAccepted = false;
ModuleBase_Operation* aOperation = currentOperation();
+ // to avoid enter processing when operation has not been started yet
+ if (!aOperation)
+ return isAccepted;
ModuleBase_IPropertyPanel* aPanel = aOperation->propertyPanel();
+ // the next code is obsolete as we want to process Enter in property panel always
// only property panel enter is processed in order to do not process enter in application dialogs
- bool isPPChild = isChildObject(theObject, aPanel);
- if (!isPPChild)
- return isAccepted;
+ //bool isPPChild = isChildObject(theObject, aPanel);
+ //if (!isPPChild)
+ // return isAccepted;
ModuleBase_ModelWidget* anActiveWgt = aPanel->activeWidget();
bool isAborted = false;
if (!anActiveWgt) {
QWidget* aFocusWidget = aPanel->focusWidget();
- QToolButton* aCancelBtn = aPanel->findChild<QToolButton*>(PROP_PANEL_CANCEL);
+ QToolButton* aCancelBtn =
+ dynamic_cast<XGUI_PropertyPanel*>(aPanel)->findButton(PROP_PANEL_CANCEL);
if (aFocusWidget && aCancelBtn && aFocusWidget == aCancelBtn) {
abortOperation(aOperation);
isAccepted = true;
if (!isAborted) {
isAccepted = anActiveWgt && anActiveWgt->processEnter();
if (!isAccepted) {
- isAccepted = myWorkshop->module()->processEnter(anActiveWgt ? anActiveWgt->attributeID() : "");
+ isAccepted =
+ myWorkshop->module()->processEnter(anActiveWgt ? anActiveWgt->attributeID() : "");
if (!isAccepted) {
/// functionality is similar to Apply click
- ModuleBase_OperationFeature* aFOperation = dynamic_cast<ModuleBase_OperationFeature*>(currentOperation());
- if (!aFOperation || myWorkshop->module()->getFeatureError(aFOperation->feature()).isEmpty()) {
- // key released is emitted to apply the current value to the model if it was modified in PP
+ ModuleBase_OperationFeature* aFOperation =
+ dynamic_cast<ModuleBase_OperationFeature*>(currentOperation());
+ if (!aFOperation ||
+ myWorkshop->module()->getFeatureError(aFOperation->feature()).isEmpty()) {
+ // key released is emitted to apply the current value to the model
+ // if it was modified in PP
emit keyEnterReleased();
commitOperation();
isAccepted = true;
return isAccepted;
}
+bool editorControl(QObject* theObject)
+{
+ QLineEdit* aLineEdit = dynamic_cast<QLineEdit*>(theObject);
+ return aLineEdit;
+}
+
bool XGUI_OperationMgr::onProcessDelete(QObject* theObject)
{
bool isAccepted = false;
// after widget, object browser and viewer should process delete
/// other widgets such as line edit controls should not lead to
/// processing delete by workshop
- XGUI_ObjectsBrowser* aBrowser = workshop()->objectBrowser();
+ XGUI_ObjectsBrowser* aBrowser = XGUI_Tools::workshop(myWorkshop)->objectBrowser();
QWidget* aViewPort = myWorkshop->viewer()->activeViewPort();
- // property panel childe object is processed to process delete performed on Apply button of PP
- if (isChildObject(theObject, aBrowser) ||
- isChildObject(theObject, aViewPort) ||
- isPPChildObject)
- workshop()->deleteObjects();
- isAccepted = true;
+ bool isToDeleteObject = false;
+ XGUI_Workshop* aWorkshop = XGUI_Tools::workshop(myWorkshop);
+ XGUI_ContextMenuMgr* aContextMenuMgr = aWorkshop->contextMenuMgr();
+ if (theObject == aBrowser->treeView()) {
+ aContextMenuMgr->updateObjectBrowserMenu();
+ isToDeleteObject = aContextMenuMgr->action("DELETE_CMD")->isEnabled();
+ }
+ else if (isChildObject(theObject, aViewPort)) {
+ aContextMenuMgr->updateViewerMenu();
+ isToDeleteObject = aContextMenuMgr->action("DELETE_CMD")->isEnabled();
+ }
+ else if (isPPChildObject) {
+ // property panel child object is processed to process delete performed on Apply button of PP
+ isToDeleteObject = true;
+ }
+ else if (editorControl(theObject)) {
+ isToDeleteObject = false; /// Line Edit of Rename operation in ObjectBrowser
+ isAccepted = true;
+ }
+
+ if (isToDeleteObject) {
+ aWorkshop->deleteObjects();
+ isAccepted = true;
+ }
}
return isAccepted;
}
-XGUI_Workshop* XGUI_OperationMgr::workshop() const
-{
- XGUI_ModuleConnector* aConnector = dynamic_cast<XGUI_ModuleConnector*>(myWorkshop);
- return aConnector->workshop();
-}
-
bool XGUI_OperationMgr::isChildObject(const QObject* theObject, const QObject* theParent)
{
bool isPPChild = false;