-// GEOM GEOMGUI : GUI for Geometry component
+// GEOM GEOMGUI : GUI for Geometry component
//
-// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
-// See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
+// File : TransformationGUI_MultiTranslationDlg.cxx
+// Author : Damien COQUERET, Open CASCADE S.A.S.
//
-//
-// File : TransformationGUI_MultiTranslationDlg.cxx
-// Author : Damien COQUERET
-// Module : GEOM
-// $Header$
#include "TransformationGUI_MultiTranslationDlg.h"
-#include <gp_Lin.hxx>
-#include <BRepBuilderAPI_MakeVertex.hxx>
-#include <BRepBuilderAPI_Transform.hxx>
-#include <BRepAdaptor_Curve.hxx>
-#include <BRep_Builder.hxx>
-#include <BRepGProp.hxx>
-#include <GProp_GProps.hxx>
-#include <TopoDS_Compound.hxx>
-#include "QAD_Config.h"
+#include <DlgRef.h>
+#include <GeometryGUI.h>
+#include <GEOMBase.h>
+
+#include <SUIT_ResourceMgr.h>
+#include <SUIT_Session.h>
+#include <SalomeApp_Application.h>
+#include <LightApp_SelectionMgr.h>
-#include "utilities.h"
+#include <TopoDS_Shape.hxx>
+#include <TopoDS_Edge.hxx>
+#include <TopoDS.hxx>
+#include <TopExp.hxx>
+#include <TColStd_IndexedMapOfInteger.hxx>
+#include <TopTools_IndexedMapOfShape.hxx>
-using namespace std;
+#include <GEOMImpl_Types.hxx>
//=================================================================================
// class : TransformationGUI_MultiTranslationDlg()
// The dialog will by default be modeless, unless you set 'modal' to
// TRUE to construct a modal dialog.
//=================================================================================
-TransformationGUI_MultiTranslationDlg::TransformationGUI_MultiTranslationDlg(QWidget* parent, const char* name, TransformationGUI* theTransformationGUI, SALOME_Selection* Sel, bool modal, WFlags fl)
- :GEOMBase_Skeleton(parent, name, Sel, modal, WStyle_Customize | WStyle_NormalBorder | WStyle_Title | WStyle_SysMenu)
+TransformationGUI_MultiTranslationDlg::TransformationGUI_MultiTranslationDlg
+( GeometryGUI* theGeometryGUI, QWidget* parent, bool modal, Qt::WindowFlags fl )
+ : GEOMBase_Skeleton( theGeometryGUI, parent, modal, fl )
{
- QPixmap image0(QAD_Desktop::getResourceManager()->loadPixmap( "GEOM",tr("ICON_DLG_MULTITRANSLATION_SIMPLE")));
- QPixmap image1(QAD_Desktop::getResourceManager()->loadPixmap( "GEOM",tr("ICON_DLG_MULTITRANSLATION_DOUBLE")));
- QPixmap image2(QAD_Desktop::getResourceManager()->loadPixmap( "GEOM",tr("ICON_SELECT")));
+ SUIT_ResourceMgr* aResMgr = myGeomGUI->getApp()->resourceMgr();
+ QPixmap image0( aResMgr->loadPixmap( "GEOM", tr( "ICON_DLG_MULTITRANSLATION_SIMPLE" ) ) );
+ QPixmap image1( aResMgr->loadPixmap( "GEOM", tr( "ICON_DLG_MULTITRANSLATION_DOUBLE" ) ) );
+ QPixmap image2( aResMgr->loadPixmap( "GEOM", tr( "ICON_SELECT" ) ) );
- setCaption(tr("GEOM_MULTITRANSLATION_TITLE"));
+ setWindowTitle( tr( "GEOM_MULTITRANSLATION_TITLE" ) );
/***************************************************************/
- GroupConstructors->setTitle(tr("GEOM_MULTITRANSLATION"));
- RadioButton1->setPixmap(image0);
- RadioButton2->setPixmap(image1);
- RadioButton3->close(TRUE);
-
- GroupPoints = new DlgRef_2Sel2Spin1Check(this, "GroupPoints");
- GroupPoints->GroupBox1->setTitle(tr("GEOM_MULTITRANSLATION_SIMPLE"));
- GroupPoints->TextLabel1->setText(tr("GEOM_MAIN_OBJECT"));
- GroupPoints->TextLabel2->setText(tr("GEOM_VECTOR_U"));
- GroupPoints->TextLabel3->setText(tr("GEOM_STEP_U"));
- GroupPoints->TextLabel4->setText(tr("GEOM_NB_TIMES_U"));
- GroupPoints->CheckButton1->setText(tr("GEOM_REVERSE_U"));
- GroupPoints->PushButton1->setPixmap(image2);
- GroupPoints->PushButton2->setPixmap(image2);
-
- GroupDimensions = new DlgRef_3Sel4Spin2Check(this, "GroupDimensions");
- GroupDimensions->GroupBox1->setTitle(tr("GEOM_MULTITRANSLATION_DOUBLE"));
- GroupDimensions->TextLabel1->setText(tr("GEOM_MAIN_OBJECT"));
- GroupDimensions->TextLabel2->setText(tr("GEOM_VECTOR_U"));
- GroupDimensions->TextLabel3->setText(tr("GEOM_VECTOR_V"));
- GroupDimensions->TextLabel4->setText(tr("GEOM_STEP_U"));
- GroupDimensions->TextLabel5->setText(tr("GEOM_NB_TIMES_U"));
- GroupDimensions->TextLabel6->setText(tr("GEOM_STEP_V"));
- GroupDimensions->TextLabel7->setText(tr("GEOM_NB_TIMES_V"));
- GroupDimensions->CheckButton1->setText(tr("GEOM_REVERSE_U"));
- GroupDimensions->CheckButton2->setText(tr("GEOM_REVERSE_V"));
- GroupDimensions->PushButton1->setPixmap(image2);
- GroupDimensions->PushButton2->setPixmap(image2);
- GroupDimensions->PushButton3->setPixmap(image2);
-
- Layout1->addWidget(GroupPoints, 1, 0);
- Layout1->addWidget(GroupDimensions, 1, 0);
+ mainFrame()->GroupConstructors->setTitle( tr( "GEOM_MULTITRANSLATION" ) );
+ mainFrame()->RadioButton1->setIcon( image0 );
+ mainFrame()->RadioButton2->setIcon( image1 );
+ mainFrame()->RadioButton3->setAttribute( Qt::WA_DeleteOnClose );
+ mainFrame()->RadioButton3->close();
+
+ GroupPoints = new DlgRef_2Sel2Spin1Check( centralWidget() );
+ GroupPoints->GroupBox1->setTitle( tr( "GEOM_MULTITRANSLATION_SIMPLE" ) );
+ GroupPoints->TextLabel1->setText( tr( "GEOM_MAIN_OBJECT" ) );
+ GroupPoints->TextLabel2->setText( tr( "GEOM_VECTOR_U" ) );
+ GroupPoints->TextLabel3->setText( tr( "GEOM_STEP_U" ) );
+ GroupPoints->TextLabel4->setText( tr( "GEOM_NB_TIMES_U" ) );
+ GroupPoints->CheckButton1->setText( tr( "GEOM_REVERSE_U" ) );
+ GroupPoints->PushButton1->setIcon( image2 );
+ GroupPoints->PushButton2->setIcon( image2 );
+ GroupPoints->LineEdit1->setReadOnly( true );
+ GroupPoints->LineEdit2->setReadOnly( true );
+
+ GroupDimensions = new DlgRef_3Sel4Spin2Check( centralWidget() );
+ GroupDimensions->GroupBox1->setTitle( tr( "GEOM_MULTITRANSLATION_DOUBLE" ) );
+ GroupDimensions->TextLabel1->setText( tr( "GEOM_MAIN_OBJECT" ) );
+ GroupDimensions->TextLabel2->setText( tr( "GEOM_VECTOR_U" ) );
+ GroupDimensions->TextLabel3->setText( tr( "GEOM_VECTOR_V" ) );
+ GroupDimensions->TextLabel4->setText( tr( "GEOM_STEP_U" ) );
+ GroupDimensions->TextLabel5->setText( tr( "GEOM_NB_TIMES_U" ) );
+ GroupDimensions->TextLabel6->setText( tr( "GEOM_STEP_V" ) );
+ GroupDimensions->TextLabel7->setText( tr( "GEOM_NB_TIMES_V" ) );
+ GroupDimensions->CheckButton1->setText( tr( "GEOM_REVERSE_U" ) );
+ GroupDimensions->CheckButton2->setText( tr( "GEOM_REVERSE_V" ) );
+ GroupDimensions->PushButton1->setIcon( image2 );
+ GroupDimensions->PushButton2->setIcon( image2 );
+ GroupDimensions->PushButton3->setIcon( image2 );
+ GroupDimensions->LineEdit1->setReadOnly( true );
+ GroupDimensions->LineEdit2->setReadOnly( true );
+ GroupDimensions->LineEdit3->setReadOnly( true );
+
+ QVBoxLayout* layout = new QVBoxLayout( centralWidget() );
+ layout->setMargin( 0 ); layout->setSpacing( 6 );
+ layout->addWidget( GroupPoints );
+ layout->addWidget( GroupDimensions );
/***************************************************************/
- /* Initialisations */
- myTransformationGUI = theTransformationGUI;
+ setHelpFileName( "multi_translation_operation_page.html" );
+
Init();
}
//=================================================================================
void TransformationGUI_MultiTranslationDlg::Init()
{
- /* init variables */
- myConstructorId = 0;
- myEditCurrentArgument = GroupPoints->LineEdit1;
-
- myStep1 = 50.0;
- myStep2 = 50.0;
- myNbTimes1 = 2;
- myNbTimes2 = 2;
- myOkBase = myOkDir1 = myOkDir2 = false;
-
- myEdgeFilter = new GEOM_ShapeTypeFilter(TopAbs_EDGE, myGeom);
-
/* Get setting of step value from file configuration */
- QString St = QAD_CONFIG->getSetting("Geometry:SettingsGeomStep");
- step = St.toDouble();
-
+ SUIT_ResourceMgr* resMgr = SUIT_Session::session()->resourceMgr();
+ double step = resMgr->doubleValue( "Geometry", "SettingsGeomStep", 100 );
+
double SpecificStep = 1;
/* min, max, step and decimals for spin boxes & initial values */
- GroupPoints->SpinBox_DX->RangeStepAndValidator(-999.999, 999.999, step, 3);
- GroupPoints->SpinBox_DY->RangeStepAndValidator(1.0, 999.999, SpecificStep, 3);
- GroupPoints->SpinBox_DX->SetValue(myStep1);
- GroupPoints->SpinBox_DY->SetValue(myNbTimes1);
-
- GroupDimensions->SpinBox_DX1->RangeStepAndValidator(-999.999, 999.999, step, 3);
- GroupDimensions->SpinBox_DY1->RangeStepAndValidator(1.0, 999.999, SpecificStep, 3);
- GroupDimensions->SpinBox_DX2->RangeStepAndValidator(-999.999, 999.999, step, 3);
- GroupDimensions->SpinBox_DY2->RangeStepAndValidator(1.0, 999.999, SpecificStep, 3);
- GroupDimensions->SpinBox_DX1->SetValue(myStep1);
- GroupDimensions->SpinBox_DY1->SetValue(myNbTimes1);
- GroupDimensions->SpinBox_DX2->SetValue(myStep2);
- GroupDimensions->SpinBox_DY2->SetValue(myNbTimes2);
+ initSpinBox( GroupPoints->SpinBox_DX, COORD_MIN, COORD_MAX, step, 10 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( GroupPoints->SpinBox_DY, 1.0, MAX_NUMBER, SpecificStep, 10 );
+ GroupPoints->SpinBox_DX->setValue( myStepU );
+ GroupPoints->SpinBox_DY->setValue( myNbTimesU );
+
+ initSpinBox( GroupDimensions->SpinBox_DX1, COORD_MIN, COORD_MAX, step, 10 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( GroupDimensions->SpinBox_DY1, 1.0, MAX_NUMBER, SpecificStep, 10 );
+ initSpinBox( GroupDimensions->SpinBox_DX2, COORD_MIN, COORD_MAX, step, 10 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( GroupDimensions->SpinBox_DY2, 1.0, MAX_NUMBER, SpecificStep, 10 );
+ GroupDimensions->SpinBox_DX1->setValue( myStepU );
+ GroupDimensions->SpinBox_DY1->setValue( myNbTimesU );
+ GroupDimensions->SpinBox_DX2->setValue( myStepV );
+ GroupDimensions->SpinBox_DY2->setValue( myNbTimesV );
/* signals and slots connections */
- connect(buttonOk, SIGNAL(clicked()), this, SLOT(ClickOnOk()));
- connect(buttonApply, SIGNAL(clicked()), this, SLOT(ClickOnApply()));
- connect(GroupConstructors, SIGNAL(clicked(int)), this, SLOT(ConstructorsClicked(int)));
-
- connect(GroupPoints->PushButton1, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
- connect(GroupPoints->PushButton2, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
- connect(GroupDimensions->PushButton1, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
- connect(GroupDimensions->PushButton2, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
- connect(GroupDimensions->PushButton3, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
-
- connect(GroupPoints->LineEdit1, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
- connect(GroupPoints->LineEdit2, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
- connect(GroupDimensions->LineEdit1, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
- connect(GroupDimensions->LineEdit2, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
- connect(GroupDimensions->LineEdit3, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
-
- connect(GroupPoints->SpinBox_DX, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
- connect(GroupPoints->SpinBox_DY, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
- connect(GroupDimensions->SpinBox_DX1, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
- connect(GroupDimensions->SpinBox_DY1, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
- connect(GroupDimensions->SpinBox_DX2, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
- connect(GroupDimensions->SpinBox_DY2, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
-
- connect(myGeomGUI, SIGNAL(SignalDefaultStepValueChanged(double)), GroupPoints->SpinBox_DX, SLOT(SetStep(double)));
- connect(myGeomGUI, SIGNAL(SignalDefaultStepValueChanged(double)), GroupPoints->SpinBox_DY, SLOT(SetStep(double)));
- connect(myGeomGUI, SIGNAL(SignalDefaultStepValueChanged(double)), GroupDimensions->SpinBox_DX1, SLOT(SetStep(double)));
- connect(myGeomGUI, SIGNAL(SignalDefaultStepValueChanged(double)), GroupDimensions->SpinBox_DY1, SLOT(SetStep(double)));
- connect(myGeomGUI, SIGNAL(SignalDefaultStepValueChanged(double)), GroupDimensions->SpinBox_DX2, SLOT(SetStep(double)));
- connect(myGeomGUI, SIGNAL(SignalDefaultStepValueChanged(double)), GroupDimensions->SpinBox_DY2, SLOT(SetStep(double)));
-
- connect(GroupPoints->CheckButton1, SIGNAL(stateChanged(int)), this, SLOT(ReverseAngle1(int)));
- connect(GroupDimensions->CheckButton1, SIGNAL(stateChanged(int)), this, SLOT(ReverseAngle1(int)));
- connect(GroupDimensions->CheckButton2, SIGNAL(stateChanged(int)), this, SLOT(ReverseAngle2(int)));
+ connect( buttonOk(), SIGNAL( clicked() ), this, SLOT( ClickOnOk() ) );
+ connect( buttonApply(), SIGNAL( clicked() ), this, SLOT( ClickOnApply() ) );
+
+ connect( this, SIGNAL( constructorsClicked( int ) ), this, SLOT( ConstructorsClicked( int ) ) );
+
+ connect( GroupPoints->PushButton1, SIGNAL( clicked() ), this, SLOT( SetEditCurrentArgument() ) );
+ connect( GroupPoints->PushButton2, SIGNAL( clicked() ), this, SLOT( SetEditCurrentArgument() ) );
+ connect( GroupDimensions->PushButton1, SIGNAL( clicked() ), this, SLOT( SetEditCurrentArgument() ) );
+ connect( GroupDimensions->PushButton2, SIGNAL( clicked() ), this, SLOT( SetEditCurrentArgument() ) );
+ connect( GroupDimensions->PushButton3, SIGNAL( clicked() ), this, SLOT( SetEditCurrentArgument() ) );
+
+ connect( GroupPoints->LineEdit1, SIGNAL( returnPressed() ), this, SLOT( LineEditReturnPressed() ) );
+ connect( GroupPoints->LineEdit2, SIGNAL( returnPressed() ), this, SLOT( LineEditReturnPressed() ) );
+ connect( GroupDimensions->LineEdit1, SIGNAL( returnPressed() ), this, SLOT( LineEditReturnPressed() ) );
+ connect( GroupDimensions->LineEdit2, SIGNAL( returnPressed() ), this, SLOT( LineEditReturnPressed() ) );
+ connect( GroupDimensions->LineEdit3, SIGNAL( returnPressed() ), this, SLOT( LineEditReturnPressed() ) );
+
+ connect( GroupPoints->SpinBox_DX, SIGNAL( valueChanged( double ) ), this, SLOT( ValueChangedInSpinBox( double ) ) );
+ connect( GroupPoints->SpinBox_DY, SIGNAL( valueChanged( double ) ), this, SLOT( ValueChangedInSpinBox( double ) ) );
+ connect( GroupDimensions->SpinBox_DX1, SIGNAL( valueChanged( double ) ), this, SLOT( ValueChangedInSpinBox( double ) ) );
+ connect( GroupDimensions->SpinBox_DY1, SIGNAL( valueChanged( double ) ), this, SLOT( ValueChangedInSpinBox( double ) ) );
+ connect( GroupDimensions->SpinBox_DX2, SIGNAL( valueChanged( double ) ), this, SLOT( ValueChangedInSpinBox( double ) ) );
+ connect( GroupDimensions->SpinBox_DY2, SIGNAL( valueChanged( double ) ), this, SLOT( ValueChangedInSpinBox( double ) ) );
+
+ // VSR: TODO ->>
+ connect( myGeomGUI, SIGNAL( SignalDefaultStepValueChanged( double ) ), GroupPoints->SpinBox_DX, SLOT( SetStep( double ) ) );
+ connect( myGeomGUI, SIGNAL( SignalDefaultStepValueChanged( double ) ), GroupPoints->SpinBox_DY, SLOT( SetStep( double ) ) );
+ connect( myGeomGUI, SIGNAL( SignalDefaultStepValueChanged( double ) ), GroupDimensions->SpinBox_DX1, SLOT( SetStep( double ) ) );
+ connect( myGeomGUI, SIGNAL( SignalDefaultStepValueChanged( double ) ), GroupDimensions->SpinBox_DY1, SLOT( SetStep( double ) ) );
+ connect( myGeomGUI, SIGNAL( SignalDefaultStepValueChanged( double ) ), GroupDimensions->SpinBox_DX2, SLOT( SetStep( double ) ) );
+ connect( myGeomGUI, SIGNAL( SignalDefaultStepValueChanged( double ) ), GroupDimensions->SpinBox_DY2, SLOT( SetStep( double ) ) );
+ // <<-
+
+ connect( GroupPoints->CheckButton1, SIGNAL( toggled( bool ) ), this, SLOT( ReverseStepU() ) );
+ connect( GroupDimensions->CheckButton1, SIGNAL( toggled( bool ) ), this, SLOT( ReverseStepU() ) );
+ connect( GroupDimensions->CheckButton2, SIGNAL( toggled( bool ) ), this, SLOT( ReverseStepV() ) );
- connect(mySelection, SIGNAL(currentSelectionChanged()), this, SLOT(SelectionIntoArgument()));
-
- /* displays Dialog */
- GroupDimensions->hide();
- GroupPoints->show();
- this->show();
+ connect( myGeomGUI->getApp()->selectionMgr(),
+ SIGNAL( currentSelectionChanged() ), this, SLOT( SelectionIntoArgument() ) );
+
+ initName( tr( "GEOM_MULTITRANSLATION" ) );
- return;
+ ConstructorsClicked( 0 );
}
// function : ConstructorsClicked()
// purpose : Radio button management
//=================================================================================
-void TransformationGUI_MultiTranslationDlg::ConstructorsClicked(int constructorId)
+void TransformationGUI_MultiTranslationDlg::ConstructorsClicked( int constructorId )
{
- myConstructorId = constructorId;
- mySelection->ClearFilters();
- myGeomBase->EraseSimulationShape();
- mySimulationTopoDs.Nullify();
- disconnect(mySelection, 0, this, 0);
- myStep1 = 50.0;
- myStep2 = 50.0;
- myNbTimes1 = 2;
- myNbTimes2 = 2;
- myOkBase = myOkDir1 = myOkDir2 = false;
-
- switch (constructorId)
+ disconnect( myGeomGUI->getApp()->selectionMgr(), 0, this, 0 );
+
+ myStepU = myStepV = 50.0;
+ myNbTimesU = myNbTimesV = 2;
+
+ globalSelection( GEOM_ALLSHAPES );
+
+ switch ( constructorId ) {
+ case 0: /* Translate simple */
{
- case 0: /* Translate simple */
- {
- GroupDimensions->hide();
- resize(0, 0);
- GroupPoints->show();
-
- myEditCurrentArgument = GroupPoints->LineEdit1;
- GroupPoints->LineEdit1->setText("");
- GroupPoints->LineEdit2->setText("");
-
- GroupPoints->SpinBox_DX->SetValue(myStep1);
- GroupPoints->SpinBox_DY->SetValue(myNbTimes1);
-
- /* filter for next selection */
- connect(mySelection, SIGNAL(currentSelectionChanged()), this, SLOT(SelectionIntoArgument()));
- break;
- }
- case 1: /* Translate double */
- {
- GroupPoints->hide();
- resize(0, 0);
- GroupDimensions->show();
-
- myEditCurrentArgument = GroupDimensions->LineEdit1;
- GroupDimensions->LineEdit1->setText("");
- GroupDimensions->LineEdit2->setText("");
- GroupDimensions->LineEdit3->setText("");
-
- GroupDimensions->SpinBox_DX1->SetValue(myStep1);
- GroupDimensions->SpinBox_DY1->SetValue(myNbTimes1);
- GroupDimensions->SpinBox_DX2->SetValue(myStep2);
- GroupDimensions->SpinBox_DY2->SetValue(myNbTimes2);
-
- /* filter for next selection */
- connect(mySelection, SIGNAL(currentSelectionChanged()), this, SLOT(SelectionIntoArgument()));
- break;
- }
+ GroupDimensions->hide();
+ GroupPoints->show();
+
+ myEditCurrentArgument = GroupPoints->LineEdit1;
+ GroupPoints->LineEdit1->setText( "" );
+ GroupPoints->LineEdit2->setText( "" );
+
+ GroupPoints->SpinBox_DX->setValue( myStepU );
+ GroupPoints->SpinBox_DY->setValue( myNbTimesU );
+
+ break;
+ }
+ case 1: /* Translate double */
+ {
+ GroupPoints->hide();
+ GroupDimensions->show();
+
+ myEditCurrentArgument = GroupDimensions->LineEdit1;
+ GroupDimensions->LineEdit1->setText( "" );
+ GroupDimensions->LineEdit2->setText( "" );
+ GroupDimensions->LineEdit3->setText( "" );
+
+ GroupDimensions->SpinBox_DX1->setValue( myStepU );
+ GroupDimensions->SpinBox_DY1->setValue( myNbTimesU );
+ GroupDimensions->SpinBox_DX2->setValue( myStepV );
+ GroupDimensions->SpinBox_DY2->setValue( myNbTimesV );
+
+ myVectorV = GEOM::GEOM_Object::_nil();
+ break;
}
- return;
+ }
+
+ qApp->processEvents();
+ updateGeometry();
+ resize( minimumSize() );
+
+ myEditCurrentArgument->setFocus();
+ myBase = myVectorU = GEOM::GEOM_Object::_nil();
+ connect( myGeomGUI->getApp()->selectionMgr(),
+ SIGNAL( currentSelectionChanged() ), this, SLOT( SelectionIntoArgument() ) );
}
//=================================================================================
void TransformationGUI_MultiTranslationDlg::ClickOnOk()
{
- this->ClickOnApply();
- ClickOnCancel();
- return;
+ if ( ClickOnApply() )
+ ClickOnCancel();
}
// function : ClickOnApply()
// purpose :
//=================================================================================
-void TransformationGUI_MultiTranslationDlg::ClickOnApply()
+bool TransformationGUI_MultiTranslationDlg::ClickOnApply()
{
- buttonApply->setFocus();
- QAD_Application::getDesktop()->putInfo(tr(""));
- if (mySimulationTopoDs.IsNull())
- return;
- myGeomBase->EraseSimulationShape();
- mySimulationTopoDs.Nullify();
-
- if(myConstructorId == 0) {
- if(myOkBase && myOkDir1)
- myTransformationGUI->MakeMultiTranslation1DAndDisplay(myGeomShape, myDir1, myStep1, myNbTimes1);
- }
- else if(myConstructorId == 1) {
- if(myOkBase && myOkDir1 && myOkDir2)
- myTransformationGUI->MakeMultiTranslation2DAndDisplay(myGeomShape, myDir1, myStep1, myNbTimes1, myDir2, myStep2, myNbTimes2);
- }
- return;
+ if ( !onAccept() )
+ return false;
+
+ initName();
+ ConstructorsClicked( getConstructorId() );
+ return true;
}
//=================================================================================
void TransformationGUI_MultiTranslationDlg::SelectionIntoArgument()
{
- myGeomBase->EraseSimulationShape();
- mySimulationTopoDs.Nullify();
- myEditCurrentArgument->setText("");
- QString aString = ""; /* name of selection */
-
- int nbSel = myGeomBase->GetNameOfSelectedIObjects(mySelection, aString);
- if(nbSel != 1) {
- if(myEditCurrentArgument == GroupPoints->LineEdit1 || myEditCurrentArgument == GroupDimensions->LineEdit1)
- myOkBase = false;
- else if(myEditCurrentArgument == GroupPoints->LineEdit2 || myEditCurrentArgument == GroupDimensions->LineEdit2)
- myOkDir1 = false;
- else if(myEditCurrentArgument == GroupDimensions->LineEdit3)
- myOkDir2 = false;
+ myEditCurrentArgument->setText( "" );
+
+ if ( IObjectCount() != 1 ) {
+ if ( myEditCurrentArgument == GroupPoints->LineEdit1 ||
+ myEditCurrentArgument == GroupDimensions->LineEdit1 )
+ myBase = GEOM::GEOM_Object::_nil();
+ else if ( myEditCurrentArgument == GroupPoints->LineEdit2 ||
+ myEditCurrentArgument == GroupDimensions->LineEdit2 )
+ myVectorU = GEOM::GEOM_Object::_nil();
+ else if ( myEditCurrentArgument == GroupDimensions->LineEdit3 )
+ myVectorV = GEOM::GEOM_Object::_nil();
return;
}
// nbSel == 1
- TopoDS_Shape S;
- Standard_Boolean testResult;
- Handle(SALOME_InteractiveObject) IO = mySelection->firstIObject();
- if(!myGeomBase->GetTopoFromSelection(mySelection, S))
- return;
+ Standard_Boolean testResult = Standard_False;;
+ GEOM::GEOM_Object_var aSelectedObject = GEOMBase::ConvertIOinGEOMObject( firstIObject(), testResult );
- switch(myConstructorId)
- {
- case 0 :
- {
- if(myEditCurrentArgument == GroupPoints->LineEdit1) {
- myGeomShape = myGeomBase->ConvertIOinGEOMShape(IO, testResult);
- if(!testResult)
- return;
- myEditCurrentArgument->setText(aString);
- myBase = S;
- myOkBase = true;
- }
- else if(myEditCurrentArgument == GroupPoints->LineEdit2) {
- BRepAdaptor_Curve curv(TopoDS::Edge(S));
- myDir1 = curv.Line().Direction();
- myEditCurrentArgument->setText(aString);
- myOkDir1 = true;
- }
+ if ( !testResult || CORBA::is_nil( aSelectedObject ) || !GEOMBase::IsShape( aSelectedObject ) )
+ return;
- if(myOkBase && myOkDir1)
- this->MakeMultiTranslationSimulationAndDisplay();
- break;
- }
- case 1 :
- {
- if(myEditCurrentArgument == GroupDimensions->LineEdit1) {
- myGeomShape = myGeomBase->ConvertIOinGEOMShape(IO, testResult);
- if(!testResult)
- return;
- myEditCurrentArgument->setText(aString);
- myBase = S;
- myOkBase = true;
- }
- else if(myEditCurrentArgument == GroupDimensions->LineEdit2) {
- BRepAdaptor_Curve curv(TopoDS::Edge(S));
- myDir1 = curv.Line().Direction();
- myEditCurrentArgument->setText(aString);
- myOkDir1 = true;
+ QString aName = GEOMBase::GetName( aSelectedObject );
+
+ if ( myEditCurrentArgument == GroupPoints->LineEdit1 ||
+ myEditCurrentArgument == GroupDimensions->LineEdit1 )
+ myBase = aSelectedObject;
+ else if ( myEditCurrentArgument == GroupPoints->LineEdit2 ||
+ myEditCurrentArgument == GroupDimensions->LineEdit2 ||
+ myEditCurrentArgument == GroupDimensions->LineEdit3 ) {
+ if ( testResult && !aSelectedObject->_is_nil() ) {
+ TopoDS_Shape aShape;
+
+ if ( GEOMBase::GetShape( aSelectedObject, aShape, TopAbs_SHAPE ) && !aShape.IsNull() ) {
+ LightApp_SelectionMgr* aSelMgr = myGeomGUI->getApp()->selectionMgr();
+ TColStd_IndexedMapOfInteger aMap;
+ aSelMgr->GetIndexes( firstIObject(), aMap );
+ if ( aMap.Extent() == 1 ) {
+ int anIndex = aMap( 1 );
+ aName += QString( ":edge_%1" ).arg( anIndex );
+
+ //Find SubShape Object in Father
+ GEOM::GEOM_Object_var aFindedObject = findObjectInFather( aSelectedObject, aName );
+
+ if ( aFindedObject == GEOM::GEOM_Object::_nil() ) { // Object not found in study
+ GEOM::GEOM_IShapesOperations_var aShapesOp =
+ getGeomEngine()->GetIShapesOperations( getStudyId() );
+ if ( myEditCurrentArgument == GroupDimensions->LineEdit3 )
+ myVectorV = aShapesOp->GetSubShape( aSelectedObject, anIndex );
+ else
+ myVectorU = aShapesOp->GetSubShape(aSelectedObject, anIndex);
+ }
+ else {
+ if ( myEditCurrentArgument == GroupDimensions->LineEdit3 )
+ myVectorV = aFindedObject;
+ else
+ myVectorU = aFindedObject;
+ }
}
- else if(myEditCurrentArgument == GroupDimensions->LineEdit3) {
- BRepAdaptor_Curve curv(TopoDS::Edge(S));
- myDir2 = curv.Line().Direction();
- myEditCurrentArgument->setText(aString);
- myOkDir2 = true;
+ else {
+ if ( aShape.ShapeType() != TopAbs_EDGE ) {
+ aSelectedObject = GEOM::GEOM_Object::_nil();
+ aName = "";
+ }
+ if ( myEditCurrentArgument == GroupDimensions->LineEdit3 )
+ myVectorV = aSelectedObject;
+ else
+ myVectorU = aSelectedObject;
}
-
- if(myOkBase && myOkDir1 && myOkDir2)
- this->MakeMultiTranslationSimulationAndDisplay();
- break;
}
}
- return;
+ }
+
+ myEditCurrentArgument->setText( aName );
+
+ displayPreview();
}
void TransformationGUI_MultiTranslationDlg::SetEditCurrentArgument()
{
QPushButton* send = (QPushButton*)sender();
- mySelection->ClearFilters();
+ globalSelection( GEOM_ALLSHAPES );
- if(send == GroupPoints->PushButton1) {
- GroupPoints->LineEdit1->setFocus();
+ if ( send == GroupPoints->PushButton1 ) {
myEditCurrentArgument = GroupPoints->LineEdit1;
}
- else if(send == GroupPoints->PushButton2) {
- GroupPoints->LineEdit2->setFocus();
+ else if ( send == GroupPoints->PushButton2 ) {
myEditCurrentArgument = GroupPoints->LineEdit2;
- mySelection->AddFilter(myEdgeFilter);
+ localSelection( GEOM::GEOM_Object::_nil(), TopAbs_EDGE );
}
- else if(send == GroupDimensions->PushButton1) {
- GroupDimensions->LineEdit1->setFocus();
+ else if ( send == GroupDimensions->PushButton1 ) {
myEditCurrentArgument = GroupDimensions->LineEdit1;
}
- else if(send == GroupDimensions->PushButton2) {
- GroupDimensions->LineEdit2->setFocus();
+ else if ( send == GroupDimensions->PushButton2 ) {
myEditCurrentArgument = GroupDimensions->LineEdit2;
- mySelection->AddFilter(myEdgeFilter);
+ localSelection( GEOM::GEOM_Object::_nil(), TopAbs_EDGE );
}
- else if(send == GroupDimensions->PushButton3) {
- GroupDimensions->LineEdit3->setFocus();
+ else if ( send == GroupDimensions->PushButton3 ) {
myEditCurrentArgument = GroupDimensions->LineEdit3;
- mySelection->AddFilter(myEdgeFilter);
+ localSelection( GEOM::GEOM_Object::_nil(), TopAbs_EDGE );
}
- this->SelectionIntoArgument();
-
- return;
+
+ myEditCurrentArgument->setFocus();
+ SelectionIntoArgument();
}
void TransformationGUI_MultiTranslationDlg::LineEditReturnPressed()
{
QLineEdit* send = (QLineEdit*)sender();
- if(send == GroupPoints->LineEdit1)
- myEditCurrentArgument = GroupPoints->LineEdit1;
- else if (send == GroupPoints->LineEdit2)
- myEditCurrentArgument = GroupPoints->LineEdit2;
- else if (send == GroupDimensions->LineEdit1)
- myEditCurrentArgument = GroupDimensions->LineEdit1;
- else if (send == GroupDimensions->LineEdit2)
- myEditCurrentArgument = GroupDimensions->LineEdit2;
- else if (send == GroupDimensions->LineEdit3)
- myEditCurrentArgument = GroupDimensions->LineEdit3;
- else
- return;
-
- GEOMBase_Skeleton::LineEditReturnPressed();
- return;
+ if ( send == GroupPoints->LineEdit1 || send == GroupDimensions->LineEdit1 ||
+ send == GroupPoints->LineEdit2 || send == GroupDimensions->LineEdit2 ||
+ send == GroupDimensions->LineEdit3 ) {
+ myEditCurrentArgument = send;
+ GEOMBase_Skeleton::LineEditReturnPressed();
+ }
}
void TransformationGUI_MultiTranslationDlg::ActivateThisDialog()
{
GEOMBase_Skeleton::ActivateThisDialog();
- connect(mySelection, SIGNAL(currentSelectionChanged()), this, SLOT(SelectionIntoArgument()));
-
- if(myConstructorId == 0) {
- GroupPoints->LineEdit1->setFocus();
- myEditCurrentArgument = GroupPoints->LineEdit1;
- }
- else if(myConstructorId == 1) {
- GroupDimensions->LineEdit1->setFocus();
- myEditCurrentArgument = GroupDimensions->LineEdit1;
- }
+ connect( myGeomGUI->getApp()->selectionMgr(),
+ SIGNAL( currentSelectionChanged() ), this, SLOT( SelectionIntoArgument() ) );
- if(!mySimulationTopoDs.IsNull())
- myGeomBase->DisplaySimulationShape(mySimulationTopoDs);
- return;
+ ConstructorsClicked( getConstructorId() );
}
// function : enterEvent()
// purpose :
//=================================================================================
-void TransformationGUI_MultiTranslationDlg::enterEvent(QEvent* e)
+void TransformationGUI_MultiTranslationDlg::enterEvent( QEvent* )
{
- if (GroupConstructors->isEnabled())
- return;
- this->ActivateThisDialog();
- return;
+ if ( !mainFrame()->GroupConstructors->isEnabled() )
+ ActivateThisDialog();
}
// function : ValueChangedInSpinBox()
// purpose :
//=================================================================================
-void TransformationGUI_MultiTranslationDlg::ValueChangedInSpinBox(double newValue)
+void TransformationGUI_MultiTranslationDlg::ValueChangedInSpinBox( double newValue )
{
- myGeomBase->EraseSimulationShape();
- mySimulationTopoDs.Nullify();
QObject* send = (QObject*)sender();
- switch(myConstructorId)
- {
- case 0 :
- {
- if(send == GroupPoints->SpinBox_DX)
- myStep1 = newValue;
- else if(send == GroupPoints->SpinBox_DY)
- myNbTimes1 = (int)newValue;
- if(myOkBase && myOkDir1)
- this->MakeMultiTranslationSimulationAndDisplay();
- break;
- }
- case 1 :
- {
- if(send == GroupDimensions->SpinBox_DX1)
- myStep1 = newValue;
- else if(send == GroupDimensions->SpinBox_DY1)
- myNbTimes1 = (int)newValue;
- else if(send == GroupDimensions->SpinBox_DX2)
- myStep2 = newValue;
- else if(send == GroupDimensions->SpinBox_DY2)
- myNbTimes2 = (int)newValue;
- if(myOkBase && myOkDir1 && myOkDir2)
- this->MakeMultiTranslationSimulationAndDisplay();
- break;
- }
- }
- return;
+ switch ( getConstructorId() ) {
+ case 0:
+ if ( send == GroupPoints->SpinBox_DX )
+ myStepU = newValue;
+ else if ( send == GroupPoints->SpinBox_DY )
+ myNbTimesU = (int)newValue;
+ break;
+ case 1 :
+ if ( send == GroupDimensions->SpinBox_DX1 )
+ myStepU = newValue;
+ else if ( send == GroupDimensions->SpinBox_DY1)
+ myNbTimesU = (int)newValue;
+ else if ( send == GroupDimensions->SpinBox_DX2 )
+ myStepV = newValue;
+ else if ( send == GroupDimensions->SpinBox_DY2 )
+ myNbTimesV = (int)newValue;
+ break;
+ }
+
+ displayPreview();
}
//=================================================================================
-// function : ReverseAngle1()
+// function : ReverseStepU()
// purpose : 'state' not used here
//=================================================================================
-void TransformationGUI_MultiTranslationDlg::ReverseAngle1(int state)
+void TransformationGUI_MultiTranslationDlg::ReverseStepU()
{
- myStep1 = -myStep1;
- if(myConstructorId == 0) {
- GroupPoints->SpinBox_DX->SetValue(myStep1);
- if(myOkBase && myOkDir1)
- this->MakeMultiTranslationSimulationAndDisplay();
- }
- else if(myConstructorId == 1) {
- GroupDimensions->SpinBox_DX1->SetValue(myStep1);
- if(myOkBase && myOkDir1 && myOkDir2)
- this->MakeMultiTranslationSimulationAndDisplay();
- }
- return;
+ myStepU = -myStepU;
+
+ int aConstructorId = getConstructorId();
+
+ if ( aConstructorId == 0 )
+ GroupPoints->SpinBox_DX->setValue( myStepU );
+ else if ( aConstructorId == 1 )
+ GroupDimensions->SpinBox_DX1->setValue( myStepU );
+
+ displayPreview();
}
//=================================================================================
-// function : ReverseAngle2()
+// function : ReverseStepV
// purpose : 'state' not used here
//=================================================================================
-void TransformationGUI_MultiTranslationDlg::ReverseAngle2(int state)
+void TransformationGUI_MultiTranslationDlg::ReverseStepV()
{
- myStep2 = -myStep2;
- GroupDimensions->SpinBox_DX2->SetValue(myStep2);
- if(myOkBase && myOkDir1 && myOkDir2)
- MakeMultiTranslationSimulationAndDisplay();
- return;
+ myStepV = -myStepV;
+
+ GroupDimensions->SpinBox_DX2->setValue( myStepV );
+
+ displayPreview();
}
//=================================================================================
-// function : MakeMultiTranslationSimulationAndDisplay()
+// function : createOperation
// purpose :
//=================================================================================
-void TransformationGUI_MultiTranslationDlg::MakeMultiTranslationSimulationAndDisplay()
+GEOM::GEOM_IOperations_ptr TransformationGUI_MultiTranslationDlg::createOperation()
{
- myGeomBase->EraseSimulationShape();
- mySimulationTopoDs.Nullify();
-
- int i, j;
- Standard_Real DX, DY, DZ;
- gp_Trsf theTransformation;
- GProp_GProps System;
- TopoDS_Compound compound;
-
- BRep_Builder B;
- B.MakeCompound(compound);
-
- try {
- BRepGProp::LinearProperties(myBase, System);
- gp_Pnt myPoint = System.CentreOfMass();
- TopoDS_Shape S = BRepBuilderAPI_MakeVertex(myPoint).Shape();
-
- switch (myConstructorId)
- {
- case 0 :
- {
- gp_Vec Vec(myDir1);
- Vec.Normalize();
-
- for(i = 0; i < myNbTimes1; i++) {
- DX = i * myStep1 * Vec.X();
- DY = i * myStep1 * Vec.Y();
- DZ = i * myStep1 * Vec.Z();
- myVec.SetCoord(DX, DY, DZ);
-
- theTransformation.SetTranslation(myVec);
- BRepBuilderAPI_Transform myBRepTransformation(S, theTransformation, Standard_False);
- B.Add(compound, myBRepTransformation.Shape());
- }
- mySimulationTopoDs = compound;
- myGeomBase->DisplaySimulationShape(mySimulationTopoDs);
- break;
- }
- case 1 :
- {
- gp_Vec Vec1(myDir1);
- Vec1.Normalize();
- gp_Vec Vec2(myDir2);
- Vec2.Normalize();
-
- for(i = 0; i < myNbTimes1; i++) {
- for(j = 0; j < myNbTimes2; j++) {
- DX = i * myStep1 * Vec1.X() + j * myStep2 * Vec2.X();
- DY = i * myStep1 * Vec1.Y() + j * myStep2 * Vec2.Y();
- DZ = i * myStep1 * Vec1.Z() + j * myStep2 * Vec2.Z();
- myVec.SetCoord(DX, DY, DZ);
-
- theTransformation.SetTranslation(myVec);
- BRepBuilderAPI_Transform myBRepTransformation(S, theTransformation, Standard_False);
- B.Add(compound, myBRepTransformation.Shape());
- }
- }
- mySimulationTopoDs = compound;
- myGeomBase->DisplaySimulationShape(mySimulationTopoDs);
- break;
- }
- }
+ return myGeomGUI->GetGeomGen()->GetITransformOperations( getStudyId() );
+}
+
+
+//=================================================================================
+// function : isValid
+// purpose :
+//=================================================================================
+bool TransformationGUI_MultiTranslationDlg::isValid( QString& /*msg*/ )
+{
+ int aConstructorId = getConstructorId();
+
+ if ( aConstructorId == 0 )
+ return !( myBase->_is_nil() || myVectorU->_is_nil() );
+ else if ( aConstructorId == 1 )
+ return !( myBase->_is_nil() || myVectorU->_is_nil() || myVectorV->_is_nil() );
+ return 0;
+}
+
+//=================================================================================
+// function : execute
+// purpose :
+//=================================================================================
+bool TransformationGUI_MultiTranslationDlg::execute( ObjectList& objects )
+{
+ bool res = false;
+
+ GEOM::GEOM_Object_var anObj;
+
+ switch ( getConstructorId() ) {
+ case 0 :
+ if ( !CORBA::is_nil( myBase ) && !CORBA::is_nil( myVectorU ) ) {
+ anObj = GEOM::GEOM_ITransformOperations::_narrow( getOperation() )->MultiTranslate1D( myBase, myVectorU, myStepU, myNbTimesU );
+ res = true;
+ }
+ break;
+ case 1 :
+ if ( !CORBA::is_nil( myBase ) && !CORBA::is_nil( myVectorU ) &&
+ !CORBA::is_nil( myVectorV ) ) {
+ anObj = GEOM::GEOM_ITransformOperations::_narrow( getOperation() )->MultiTranslate2D( myBase, myVectorU, myStepU, myNbTimesU,
+ myVectorV, myStepV, myNbTimesV );
+ res = true;
+ }
+ break;
}
- catch(Standard_Failure) {
- MESSAGE("Exception catched in MakeMultitranslationSimulationAndDisplay");
- return;
+
+ if ( !anObj->_is_nil() )
+ objects.push_back( anObj._retn() );
+
+ return res;
+}
+
+
+//=================================================================================
+// function : addSubshapeToStudy
+// purpose : virtual method to add new SubObjects if local selection
+//=================================================================================
+void TransformationGUI_MultiTranslationDlg::addSubshapesToStudy()
+{
+ QMap<QString, GEOM::GEOM_Object_var> objMap;
+
+ switch ( getConstructorId() ) {
+ case 0:
+ objMap[GroupPoints->LineEdit2->text()] = myVectorU;
+ break;
+ case 1:
+ objMap[GroupDimensions->LineEdit2->text()] = myVectorU;
+ objMap[GroupDimensions->LineEdit3->text()] = myVectorV;
+ break;
}
- return;
+ addSubshapesToFather( objMap );
}
