-// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
-// GEOM GEOMGUI : GUI for Geometry component
-// File : TransformationGUI_MultiTranslationDlg.cxx
-// Author : Damien COQUERET, Open CASCADE S.A.S.
-//
+// GEOM GEOMGUI : GUI for Geometry component
+// File : TransformationGUI_MultiTranslationDlg.cxx
+// Author : Damien COQUERET, Open CASCADE S.A.S.
+
#include "TransformationGUI_MultiTranslationDlg.h"
#include <DlgRef.h>
#include <SUIT_Session.h>
#include <SUIT_ResourceMgr.h>
+#include <SUIT_Desktop.h>
+#include <SUIT_ViewWindow.h>
+#include <SUIT_ViewManager.h>
#include <SalomeApp_Application.h>
#include <LightApp_SelectionMgr.h>
+#include <GEOM_AISVector.hxx>
+#include <SOCC_Prs.h>
+#include <SOCC_ViewModel.h>
// OCCT Includes
#include <TopoDS_Shape.hxx>
#include <TopExp.hxx>
#include <TColStd_IndexedMapOfInteger.hxx>
#include <TopTools_IndexedMapOfShape.hxx>
+#include <ShapeAnalysis_Edge.hxx>
+#include <BRep_Tool.hxx>
+#include <BRepBuilderAPI_MakeEdge.hxx>
+#include <BRep_Builder.hxx>
#include <GEOMImpl_Types.hxx>
SUIT_ResourceMgr* resMgr = SUIT_Session::session()->resourceMgr();
double step = resMgr->doubleValue("Geometry", "SettingsGeomStep", 100);
- double SpecificStep = 1;
+ int SpecificStep = 1;
+ // init variables
+ myStepU = myStepV = 50.0;
+ myNbTimesU = myNbTimesV = 2;
+
// min, max, step and decimals for spin boxes & initial values
- initSpinBox(GroupPoints->SpinBox_DX, COORD_MIN, COORD_MAX, step, 10); // VSR: TODO: DBL_DIGITS_DISPLAY
- initSpinBox(GroupPoints->SpinBox_DY, 1, 999, SpecificStep, 10);
+ initSpinBox(GroupPoints->SpinBox_DX, COORD_MIN, COORD_MAX, step, "length_precision" );
+ initSpinBox(GroupPoints->SpinBox_DY, 1, 999, SpecificStep);
GroupPoints->SpinBox_DX->setValue(myStepU);
GroupPoints->SpinBox_DY->setValue(myNbTimesU);
- GroupPoints->SpinBox_DY->setDecimals(0);
- initSpinBox(GroupDimensions->SpinBox_DX1, COORD_MIN, COORD_MAX, step, 10); // VSR: TODO: DBL_DIGITS_DISPLAY
- initSpinBox(GroupDimensions->SpinBox_DY1, 1, 999, SpecificStep, 10);
- initSpinBox(GroupDimensions->SpinBox_DX2, COORD_MIN, COORD_MAX, step, 10); // VSR: TODO: DBL_DIGITS_DISPLAY
- initSpinBox(GroupDimensions->SpinBox_DY2, 1, 999, SpecificStep, 10);
+ initSpinBox(GroupDimensions->SpinBox_DX1, COORD_MIN, COORD_MAX, step, "length_precision" );
+ initSpinBox(GroupDimensions->SpinBox_DY1, 1, 999, SpecificStep);
+ initSpinBox(GroupDimensions->SpinBox_DX2, COORD_MIN, COORD_MAX, step, "length_precision" );
+ initSpinBox(GroupDimensions->SpinBox_DY2, 1, 999, SpecificStep);
GroupDimensions->SpinBox_DX1->setValue(myStepU);
GroupDimensions->SpinBox_DY1->setValue(myNbTimesU);
GroupDimensions->SpinBox_DX2->setValue(myStepV);
GroupDimensions->SpinBox_DY2->setValue(myNbTimesV);
- GroupDimensions->SpinBox_DY1->setDecimals(0);
- GroupDimensions->SpinBox_DY2->setDecimals(0);
-
- // init variables
- myStepU = myStepV = 50.0;
- myNbTimesU = myNbTimesV = 2;
GroupPoints->LineEdit1->setText("");
GroupPoints->LineEdit2->setText("");
GroupDimensions->LineEdit2->setText("");
GroupDimensions->LineEdit3->setText("");
- myBase = myVectorU = myVectorV = GEOM::GEOM_Object::_nil();
+ myBase.nullify();
+ myVectorU.nullify();
+ myVectorV.nullify();
+
+ mainFrame()->GroupBoxPublish->show();
// signals and slots connections
connect(buttonOk(), SIGNAL(clicked()), this, SLOT(ClickOnOk()));
connect(GroupDimensions->PushButton2, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
connect(GroupDimensions->PushButton3, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
- connect(GroupPoints->LineEdit1, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
- connect(GroupPoints->LineEdit2, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
- connect(GroupDimensions->LineEdit1, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
- connect(GroupDimensions->LineEdit2, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
- connect(GroupDimensions->LineEdit3, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
-
connect(GroupPoints->SpinBox_DX, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
- connect(GroupPoints->SpinBox_DY, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
+ connect(GroupPoints->SpinBox_DY, SIGNAL(valueChanged(int)), this, SLOT(ValueChangedInSpinBox(int)));
connect(GroupDimensions->SpinBox_DX1, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
- connect(GroupDimensions->SpinBox_DY1, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
+ connect(GroupDimensions->SpinBox_DY1, SIGNAL(valueChanged(int)), this, SLOT(ValueChangedInSpinBox(int)));
connect(GroupDimensions->SpinBox_DX2, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
- connect(GroupDimensions->SpinBox_DY2, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
+ connect(GroupDimensions->SpinBox_DY2, SIGNAL(valueChanged(int)), this, SLOT(ValueChangedInSpinBox(int)));
- connect(GroupPoints->SpinBox_DX, SIGNAL(textChanged(const QString& )),
+ connect(GroupPoints->SpinBox_DX, SIGNAL(textChanged(const QString& )),
this, SLOT(TextValueChangedInSpinBox(const QString& )));
- connect(GroupDimensions->SpinBox_DX1, SIGNAL(textChanged(const QString& )),
+ connect(GroupDimensions->SpinBox_DX1, SIGNAL(textChanged(const QString& )),
this, SLOT(TextValueChangedInSpinBox(const QString& )));
- connect(GroupDimensions->SpinBox_DX2, SIGNAL(textChanged(const QString& )),
+ connect(GroupDimensions->SpinBox_DX2, SIGNAL(textChanged(const QString& )),
this, SLOT(TextValueChangedInSpinBox(const QString& )));
-
+
connect(myGeomGUI, SIGNAL(SignalDefaultStepValueChanged(double)), this, SLOT(SetDoubleSpinBoxStep(double)));
connect(GroupPoints->CheckButton1, SIGNAL(toggled(bool)), this, SLOT(ReverseStepU()));
void TransformationGUI_MultiTranslationDlg::SetDoubleSpinBoxStep (double step)
{
GroupPoints->SpinBox_DX->setSingleStep(step);
- GroupPoints->SpinBox_DY->setSingleStep(step);
GroupDimensions->SpinBox_DX1->setSingleStep(step);
- GroupDimensions->SpinBox_DY1->setSingleStep(step);
GroupDimensions->SpinBox_DX2->setSingleStep(step);
- GroupDimensions->SpinBox_DY2->setSingleStep(step);
+
+ // san : Commented so as not to override specific step settings
+ //GroupPoints->SpinBox_DY->setSingleStep((int)step);
+ //GroupDimensions->SpinBox_DY1->setSingleStep((int)step);
+ //GroupDimensions->SpinBox_DY2->setSingleStep((int)step);
}
//=================================================================================
GroupPoints->LineEdit1->setText("");
GroupPoints->LineEdit2->setText("");
- myBase = myVectorU = GEOM::GEOM_Object::_nil();
+ myBase.nullify();
+ myVectorU.nullify();
GroupPoints->SpinBox_DX->setValue(myStepU);
GroupPoints->SpinBox_DY->setValue(myNbTimesU);
GroupDimensions->LineEdit1->setText("");
GroupDimensions->LineEdit2->setText("");
GroupDimensions->LineEdit3->setText("");
- myBase = myVectorU = myVectorV = GEOM::GEOM_Object::_nil();
+ myBase.nullify();
+ myVectorU.nullify();
+ myVectorV.nullify();
GroupDimensions->SpinBox_DX1->setValue(myStepU);
GroupDimensions->SpinBox_DY1->setValue(myNbTimesU);
void TransformationGUI_MultiTranslationDlg::SelectionIntoArgument()
{
erasePreview();
- myEditCurrentArgument->setText("");
-
- if (myEditCurrentArgument == GroupPoints->LineEdit1 ||
- myEditCurrentArgument == GroupDimensions->LineEdit1)
- myBase = GEOM::GEOM_Object::_nil();
- else if (myEditCurrentArgument == GroupPoints->LineEdit2 ||
- myEditCurrentArgument == GroupDimensions->LineEdit2)
- myVectorU = GEOM::GEOM_Object::_nil();
- else if (myEditCurrentArgument == GroupDimensions->LineEdit3)
- myVectorV = GEOM::GEOM_Object::_nil();
-
- LightApp_SelectionMgr* aSelMgr = myGeomGUI->getApp()->selectionMgr();
- SALOME_ListIO aSelList;
- aSelMgr->selectedObjects(aSelList);
-
- if (aSelList.Extent() != 1)
- return;
-
- // nbSel == 1
- Standard_Boolean testResult = Standard_False;;
- GEOM::GEOM_Object_var aSelectedObject = GEOMBase::ConvertIOinGEOMObject(aSelList.First(), testResult);
-
- if (!testResult || CORBA::is_nil(aSelectedObject) || !GEOMBase::IsShape(aSelectedObject))
- return;
-
- QString aName = GEOMBase::GetName(aSelectedObject);
-
- if (myEditCurrentArgument == GroupPoints->LineEdit1 ||
- myEditCurrentArgument == GroupDimensions->LineEdit1)
- myBase = aSelectedObject;
- else if (myEditCurrentArgument == GroupPoints->LineEdit2 ||
- myEditCurrentArgument == GroupDimensions->LineEdit2 ||
- myEditCurrentArgument == GroupDimensions->LineEdit3) {
- TopoDS_Shape aShape;
- if (GEOMBase::GetShape(aSelectedObject, aShape, TopAbs_SHAPE) && !aShape.IsNull()) {
- TColStd_IndexedMapOfInteger aMap;
- aSelMgr->GetIndexes(aSelList.First(), aMap);
- if (aMap.Extent() == 1) {
- int anIndex = aMap(1);
- aName += QString(":edge_%1").arg(anIndex);
-
- //Find SubShape Object in Father
- GEOM::GEOM_Object_var aFindedObject = findObjectInFather(aSelectedObject, aName);
-
- if (aFindedObject == GEOM::GEOM_Object::_nil()) { // Object not found in study
- GEOM::GEOM_IShapesOperations_var aShapesOp =
- getGeomEngine()->GetIShapesOperations(getStudyId());
- if (myEditCurrentArgument == GroupDimensions->LineEdit3)
- myVectorV = aShapesOp->GetSubShape(aSelectedObject, anIndex);
- else
- myVectorU = aShapesOp->GetSubShape(aSelectedObject, anIndex);
- }
- else {
- if (myEditCurrentArgument == GroupDimensions->LineEdit3)
- myVectorV = aFindedObject;
- else
- myVectorU = aFindedObject;
- }
- }
- else {
- if (aShape.ShapeType() != TopAbs_EDGE) {
- aSelectedObject = GEOM::GEOM_Object::_nil();
- aName = "";
- }
- if (myEditCurrentArgument == GroupDimensions->LineEdit3)
- myVectorV = aSelectedObject;
- else
- myVectorU = aSelectedObject;
- }
+ TopAbs_ShapeEnum aNeedType = ( myEditCurrentArgument == GroupPoints->LineEdit2 ||
+ myEditCurrentArgument == GroupDimensions->LineEdit2 ||
+ myEditCurrentArgument == GroupDimensions->LineEdit3 ) ?
+ TopAbs_EDGE : TopAbs_SHAPE;
+ GEOM::GeomObjPtr aSelectedObject = getSelected( aNeedType );
+ TopoDS_Shape aShape;
+ if ( aSelectedObject && GEOMBase::GetShape( aSelectedObject.get(), aShape ) && !aShape.IsNull() ) {
+ QString aName = GEOMBase::GetName( aSelectedObject.get() );
+ myEditCurrentArgument->setText( aName );
+ if ( myEditCurrentArgument == GroupPoints->LineEdit1 ) {
+ myBase = aSelectedObject;
+ if ( !myVectorU )
+ GroupPoints->PushButton2->click();
+ }
+ else if ( myEditCurrentArgument == GroupPoints->LineEdit2 ) {
+ myVectorU = aSelectedObject;
+ if ( !myBase )
+ GroupPoints->PushButton1->click();
+ }
+ else if ( myEditCurrentArgument == GroupDimensions->LineEdit1 ) {
+ myBase = aSelectedObject;
+ if ( !myVectorU )
+ GroupDimensions->PushButton2->click();
+ else if ( !myVectorV )
+ GroupDimensions->PushButton3->click();
+ }
+ else if ( myEditCurrentArgument == GroupDimensions->LineEdit2 ) {
+ myVectorU = aSelectedObject;
+ if ( !myVectorV )
+ GroupDimensions->PushButton3->click();
+ else if ( !myBase )
+ GroupDimensions->PushButton1->click();
+ }
+ else if ( myEditCurrentArgument == GroupDimensions->LineEdit3 ) {
+ myVectorV = aSelectedObject;
+ if ( !myBase )
+ GroupDimensions->PushButton1->click();
+ else if ( !myVectorU )
+ GroupDimensions->PushButton2->click();
}
- }
- myEditCurrentArgument->setText(aName);
- if (myEditCurrentArgument == GroupPoints->LineEdit1) {
- if (!myBase->_is_nil() && myVectorU->_is_nil())
- GroupPoints->PushButton2->click();
- }
- else if (myEditCurrentArgument == GroupPoints->LineEdit2) {
- if (!myVectorU->_is_nil() && myBase->_is_nil())
- GroupPoints->PushButton1->click();
+ // clear selection
+ disconnect(myGeomGUI->getApp()->selectionMgr(), 0, this, 0);
+ myGeomGUI->getApp()->selectionMgr()->clearSelected();
+ connect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
+ this, SLOT(SelectionIntoArgument()));
}
- else if (myEditCurrentArgument == GroupDimensions->LineEdit1) {
- if (!myBase->_is_nil() && myVectorU->_is_nil())
- GroupDimensions->PushButton2->click();
- }
- else if (myEditCurrentArgument == GroupDimensions->LineEdit2) {
- if (!myVectorU->_is_nil() && myVectorV->_is_nil())
- GroupDimensions->PushButton3->click();
- }
- else if (myEditCurrentArgument == GroupDimensions->LineEdit3) {
- if (!myVectorV->_is_nil() && myBase->_is_nil())
- GroupDimensions->PushButton1->click();
+ else {
+ if ( myEditCurrentArgument == GroupPoints->LineEdit1 ||
+ myEditCurrentArgument == GroupDimensions->LineEdit1 )
+ myBase.nullify();
+ else if ( myEditCurrentArgument == GroupPoints->LineEdit2 ||
+ myEditCurrentArgument == GroupDimensions->LineEdit2 )
+ myVectorU.nullify();
+ else if ( myEditCurrentArgument == GroupDimensions->LineEdit3 )
+ myVectorV.nullify();
+ myEditCurrentArgument->setText("");
}
- // clear selection
- disconnect(myGeomGUI->getApp()->selectionMgr(), 0, this, 0);
- myGeomGUI->getApp()->selectionMgr()->clearSelected();
- connect(myGeomGUI->getApp()->selectionMgr(), SIGNAL(currentSelectionChanged()),
- this, SLOT(SelectionIntoArgument()));
-
displayPreview();
}
displayPreview();
}
-//=================================================================================
-// function : LineEditReturnPressed()
-// purpose :
-//=================================================================================
-void TransformationGUI_MultiTranslationDlg::LineEditReturnPressed()
-{
- QLineEdit* send = (QLineEdit*)sender();
- if (send == GroupPoints->LineEdit1 || send == GroupDimensions->LineEdit1 ||
- send == GroupPoints->LineEdit2 || send == GroupDimensions->LineEdit2 ||
- send == GroupDimensions->LineEdit3) {
- myEditCurrentArgument = send;
- GEOMBase_Skeleton::LineEditReturnPressed();
- }
-}
-
//=================================================================================
// function : ActivateThisDialog()
// purpose :
{
GEOMBase_Skeleton::ActivateThisDialog();
connect( myGeomGUI->getApp()->selectionMgr(), SIGNAL( currentSelectionChanged() ),
- this, SLOT( SelectionIntoArgument() ) );
+ this, SLOT( SelectionIntoArgument() ) );
ConstructorsClicked( getConstructorId() );
}
{
QObject* send = (QObject*)sender();
bool isDigit = true;
-
+
switch (getConstructorId()) {
- case 0:
+ case 0:
GroupPoints->SpinBox_DX->text().toDouble(&isDigit);
if(!isDigit){
GroupPoints->CheckButton1->setChecked(false);
}
GroupPoints->CheckButton1->setEnabled(isDigit);
break;
- case 1:
+ case 1:
if (send == GroupDimensions->SpinBox_DX1) {
GroupDimensions->SpinBox_DX1->text().toDouble(&isDigit);
- if(!isDigit)
+ if(!isDigit)
GroupDimensions->CheckButton1->setChecked(false);
GroupDimensions->CheckButton1->setEnabled(isDigit);
}
else if(send == GroupDimensions->SpinBox_DX2){
GroupDimensions->SpinBox_DX2->text().toDouble(&isDigit);
- if(!isDigit)
+ if(!isDigit)
GroupDimensions->CheckButton2->setChecked(false);
GroupDimensions->CheckButton2->setEnabled(isDigit);
}
case 0:
if (send == GroupPoints->SpinBox_DX)
myStepU = newValue;
- else if (send == GroupPoints->SpinBox_DY)
- myNbTimesU = (int)newValue;
break;
case 1:
if (send == GroupDimensions->SpinBox_DX1)
myStepU = newValue;
- else if (send == GroupDimensions->SpinBox_DY1)
- myNbTimesU = (int)newValue;
else if (send == GroupDimensions->SpinBox_DX2)
myStepV = newValue;
+ break;
+ }
+
+ displayPreview();
+}
+
+//=================================================================================
+// function : ValueChangedInSpinBox()
+// purpose :
+//=================================================================================
+void TransformationGUI_MultiTranslationDlg::ValueChangedInSpinBox (int newValue)
+{
+ QObject* send = (QObject*)sender();
+ switch (getConstructorId()) {
+ case 0:
+ if (send == GroupPoints->SpinBox_DY)
+ myNbTimesU = newValue;
+ break;
+ case 1:
+ if (send == GroupDimensions->SpinBox_DY1)
+ myNbTimesU = newValue;
else if (send == GroupDimensions->SpinBox_DY2)
- myNbTimesV = (int)newValue;
+ myNbTimesV = newValue;
break;
}
//=================================================================================
bool TransformationGUI_MultiTranslationDlg::isValid (QString& msg)
{
- int aConstructorId = getConstructorId();
-
- if (aConstructorId == 0) {
- bool ok = true;
- ok = GroupPoints->SpinBox_DX->isValid( msg, !IsPreview() ) && ok;
- ok = GroupPoints->SpinBox_DY->isValid( msg, !IsPreview() ) && ok;
- return !(myBase->_is_nil() || myVectorU->_is_nil()) && ok;
- }
- else if (aConstructorId == 1) {
- bool ok = true;
- ok = GroupDimensions->SpinBox_DX1->isValid( msg, !IsPreview() ) && ok;
- ok = GroupDimensions->SpinBox_DY1->isValid( msg, !IsPreview() ) && ok;
- ok = GroupDimensions->SpinBox_DX2->isValid( msg, !IsPreview() ) && ok;
- ok = GroupDimensions->SpinBox_DY2->isValid( msg, !IsPreview() ) && ok;
- return !(myBase->_is_nil() || myVectorU->_is_nil() || myVectorV->_is_nil()) && ok;
+ bool ok = false;
+ switch ( getConstructorId() ) {
+ case 0:
+ ok = GroupPoints->SpinBox_DX->isValid( msg, !IsPreview() ) &&
+ GroupPoints->SpinBox_DY->isValid( msg, !IsPreview() ) &&
+ myBase && myVectorU;
+ break;
+ case 1:
+ ok = GroupDimensions->SpinBox_DX1->isValid( msg, !IsPreview() ) &&
+ GroupDimensions->SpinBox_DY1->isValid( msg, !IsPreview() ) &&
+ GroupDimensions->SpinBox_DX2->isValid( msg, !IsPreview() ) &&
+ GroupDimensions->SpinBox_DY2->isValid( msg, !IsPreview() ) &&
+ myBase && myVectorU && myVectorV;
+ break;
+ default:
+ break;
}
- return 0;
+ return ok;
}
//=================================================================================
QStringList aParameters;
+ GEOM::GEOM_ITransformOperations_var anOper = GEOM::GEOM_ITransformOperations::_narrow(getOperation());
+
switch (getConstructorId()) {
case 0:
- if (!CORBA::is_nil(myBase) && !CORBA::is_nil(myVectorU)) {
- anObj = GEOM::GEOM_ITransformOperations::_narrow(getOperation())->
- MultiTranslate1D(myBase, myVectorU, myStepU, myNbTimesU);
+ if ( myBase && myVectorU ) {
+ createPathPreview ( myVectorU.get() );
+ anObj = anOper->MultiTranslate1D(myBase.get(), myVectorU.get(), myStepU, myNbTimesU);
if(!IsPreview()) {
aParameters<<GroupPoints->SpinBox_DX->text();
aParameters<<GroupPoints->SpinBox_DY->text();
}
break;
case 1:
- if (!CORBA::is_nil(myBase) && !CORBA::is_nil(myVectorU) &&
- !CORBA::is_nil(myVectorV)) {
- anObj = GEOM::GEOM_ITransformOperations::_narrow(getOperation())->
- MultiTranslate2D(myBase, myVectorU, myStepU, myNbTimesU,
- myVectorV, myStepV, myNbTimesV);
+ if ( myBase && myVectorU && myVectorV ) {
+ createPathPreview ( myVectorU.get() );
+ createPathPreview ( myVectorV.get() );
+ anObj = anOper->MultiTranslate2D(myBase.get(),
+ myVectorU.get(), myStepU, myNbTimesU,
+ myVectorV.get(), myStepV, myNbTimesV);
if(!IsPreview()) {
aParameters<<GroupDimensions->SpinBox_DX1->text();
aParameters<<GroupDimensions->SpinBox_DY1->text();
if (!anObj->_is_nil()) {
if(!IsPreview())
- anObj->SetParameters(GeometryGUI::JoinObjectParameters(aParameters));
+ anObj->SetParameters(aParameters.join(":").toLatin1().constData());
objects.push_back(anObj._retn());
}
//=================================================================================
void TransformationGUI_MultiTranslationDlg::addSubshapesToStudy()
{
- QMap<QString, GEOM::GEOM_Object_var> objMap;
-
switch (getConstructorId()) {
case 0:
- objMap[GroupPoints->LineEdit2->text()] = myVectorU;
+ GEOMBase::PublishSubObject( myVectorU.get() );
break;
case 1:
- objMap[GroupDimensions->LineEdit2->text()] = myVectorU;
- objMap[GroupDimensions->LineEdit3->text()] = myVectorV;
+ GEOMBase::PublishSubObject( myVectorU.get() );
+ GEOMBase::PublishSubObject( myVectorV.get() );
+ break;
+ default:
break;
}
- addSubshapesToFather(objMap);
+}
+
+//=================================================================================
+// function : restoreSubShapes
+// purpose :
+//=================================================================================
+void TransformationGUI_MultiTranslationDlg::restoreSubShapes (SALOMEDS::Study_ptr theStudy,
+ SALOMEDS::SObject_ptr theSObject)
+{
+ if (mainFrame()->CheckBoxRestoreSS->isChecked()) {
+ // we pass here the first operation argument (object) through the list of arguments
+ // because the rotation operation place its arguments in the data structure in another order,
+ // and we need to point the first argument directly
+ GEOM::ListOfGO_var anArgs = new GEOM::ListOfGO;
+ anArgs->length(1);
+ anArgs[0] = myBase.copy();
+ getGeomEngine()->RestoreSubShapesSO(theStudy, theSObject, anArgs,
+ /*theFindMethod=*/GEOM::FSM_MultiTransformed,
+ /*theInheritFirstArg=*/true,
+ mainFrame()->CheckBoxAddPrefix->isChecked());
+ }
+}
+
+//=================================================================================
+// function : createPathPreview
+// purpose :
+//=================================================================================
+void TransformationGUI_MultiTranslationDlg::createPathPreview ( GEOM::GEOM_Object_ptr thePath )
+{
+ if ( IsPreview() ) {
+ TopoDS_Shape aShape;
+ GEOMBase::GetShape( thePath, aShape, TopAbs_SHAPE );
+ TopoDS_Edge anEdge = TopoDS::Edge( aShape );
+ ShapeAnalysis_Edge aShapeAnal;
+ TopoDS_Vertex aFirst = aShapeAnal.FirstVertex( anEdge );
+ TopoDS_Vertex aLast = aShapeAnal.LastVertex( anEdge );
+ TopoDS_Shape aVector = BRepBuilderAPI_MakeEdge(BRep_Tool::Pnt(aFirst), BRep_Tool::Pnt(aLast)).Shape();
+ const char* aName = "tmpVector";
+ Handle(GEOM_AISVector) anIO = new GEOM_AISVector( aVector, aName );
+
+ // add Prs to preview
+ SUIT_ViewWindow* vw = SUIT_Session::session()->activeApplication()->desktop()->activeWindow();
+ SOCC_Prs* aPrs = dynamic_cast<SOCC_Prs*>(((SOCC_Viewer*)(vw->getViewManager()->getViewModel()))->CreatePrs(0));
+ if (aPrs)
+ aPrs->AddObject(anIO);
+ GEOMBase_Helper::displayPreview( aPrs, false, true );
+ }
}