-// GEOM GEOMGUI : GUI for Geometry component
+// GEOM GEOMGUI : GUI for Geometry component
//
-// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
-// See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
+// File : TransformationGUI_MultiRotationDlg.cxx
+// Author : Damien COQUERET, Open CASCADE S.A.S.
//
-//
-// File : TransformationGUI_MultiRotationDlg.cxx
-// Author : Damien COQUERET
-// Module : GEOM
-// $Header$
#include "TransformationGUI_MultiRotationDlg.h"
-#include "GEOMImpl_Types.hxx"
-
-#include "QAD_Config.h"
-#include "QAD_Desktop.h"
+#include <DlgRef.h>
+#include <GeometryGUI.h>
+#include <GEOMBase.h>
-#include <qcheckbox.h>
+#include <SUIT_ResourceMgr.h>
+#include <SUIT_Session.h>
+#include <SalomeApp_Application.h>
+#include <LightApp_SelectionMgr.h>
-#include "utilities.h"
+#include <TopoDS_Shape.hxx>
+#include <TopoDS_Edge.hxx>
+#include <TopoDS.hxx>
+#include <TopExp.hxx>
+#include <TColStd_IndexedMapOfInteger.hxx>
+#include <TopTools_IndexedMapOfShape.hxx>
-using namespace std;
+#include <GEOMImpl_Types.hxx>
//=================================================================================
// class : TransformationGUI_MultiRotationDlg()
// The dialog will by default be modeless, unless you set 'modal' to
// TRUE to construct a modal dialog.
//=================================================================================
-TransformationGUI_MultiRotationDlg::TransformationGUI_MultiRotationDlg(QWidget* parent, const char* name, SALOME_Selection* Sel, bool modal, WFlags fl)
- :GEOMBase_Skeleton(parent, name, Sel, modal, WStyle_Customize | WStyle_NormalBorder | WStyle_Title | WStyle_SysMenu)
+TransformationGUI_MultiRotationDlg::TransformationGUI_MultiRotationDlg
+( GeometryGUI* theGeometryGUI, QWidget* parent, bool modal, Qt::WindowFlags fl )
+ : GEOMBase_Skeleton( theGeometryGUI, parent, modal, fl )
{
- QPixmap image0(QAD_Desktop::getResourceManager()->loadPixmap("GEOM",tr("ICON_DLG_MULTIROTATION_SIMPLE")));
- QPixmap image1(QAD_Desktop::getResourceManager()->loadPixmap("GEOM",tr("ICON_DLG_MULTIROTATION_DOUBLE")));
- QPixmap image2(QAD_Desktop::getResourceManager()->loadPixmap("GEOM",tr("ICON_SELECT")));
+ SUIT_ResourceMgr* aResMgr = myGeomGUI->getApp()->resourceMgr();
+ QPixmap image0( aResMgr->loadPixmap( "GEOM", tr( "ICON_DLG_MULTIROTATION_SIMPLE" ) ) );
+ QPixmap image1( aResMgr->loadPixmap( "GEOM", tr( "ICON_DLG_MULTIROTATION_DOUBLE" ) ) );
+ QPixmap image2( aResMgr->loadPixmap( "GEOM", tr( "ICON_SELECT" ) ) );
- setCaption(tr("GEOM_MULTIROTATION_TITLE"));
+ setWindowTitle( tr( "GEOM_MULTIROTATION_TITLE" ) );
/***************************************************************/
- GroupConstructors->setTitle(tr("GEOM_MULTIROTATION"));
- RadioButton1->setPixmap(image0);
- RadioButton2->setPixmap(image1);
- RadioButton3->close(TRUE);
-
- GroupPoints = new DlgRef_2Sel1Spin(this, "GroupPoints");
- GroupPoints->GroupBox1->setTitle(tr("GEOM_MULTIROTATION_SIMPLE"));
- GroupPoints->TextLabel1->setText(tr("GEOM_MAIN_OBJECT"));
- GroupPoints->TextLabel2->setText(tr("GEOM_VECTOR"));
- GroupPoints->TextLabel3->setText(tr("GEOM_NB_TIMES"));
- GroupPoints->PushButton1->setPixmap(image2);
- GroupPoints->PushButton2->setPixmap(image2);
- GroupPoints->LineEdit1->setReadOnly(true);
- GroupPoints->LineEdit2->setReadOnly(true);
-
- GroupDimensions = new DlgRef_2Sel4Spin1Check(this, "GroupDimensions");
- GroupDimensions->GroupBox1->setTitle(tr("GEOM_MULTIROTATION_DOUBLE"));
- GroupDimensions->TextLabel1->setText(tr("GEOM_MAIN_OBJECT"));
- GroupDimensions->TextLabel2->setText(tr("GEOM_VECTOR"));
- GroupDimensions->TextLabel3->setText(tr("GEOM_ANGLE"));
- GroupDimensions->TextLabel4->setText(tr("GEOM_NB_TIMES"));
- GroupDimensions->TextLabel5->setText(tr("GEOM_STEP"));
- GroupDimensions->TextLabel6->setText(tr("GEOM_NB_TIMES"));
- GroupDimensions->CheckButton1->setText(tr("GEOM_REVERSE"));
- GroupDimensions->PushButton1->setPixmap(image2);
- GroupDimensions->PushButton2->setPixmap(image2);
- GroupDimensions->LineEdit1->setReadOnly(true);
- GroupDimensions->LineEdit2->setReadOnly(true);
-
- Layout1->addWidget(GroupPoints, 2, 0);
- Layout1->addWidget(GroupDimensions, 2, 0);
+ mainFrame()->GroupConstructors->setTitle( tr( "GEOM_MULTIROTATION" ) );
+ mainFrame()->RadioButton1->setIcon( image0 );
+ mainFrame()->RadioButton2->setIcon( image1 );
+ mainFrame()->RadioButton3->setAttribute( Qt::WA_DeleteOnClose );
+ mainFrame()->RadioButton3->close();
+
+ GroupPoints = new DlgRef_2Sel1Spin( centralWidget() );
+ GroupPoints->GroupBox1->setTitle( tr( "GEOM_MULTIROTATION_SIMPLE" ) );
+ GroupPoints->TextLabel1->setText( tr( "GEOM_MAIN_OBJECT" ) );
+ GroupPoints->TextLabel2->setText( tr( "GEOM_VECTOR" ) );
+ GroupPoints->TextLabel3->setText( tr( "GEOM_NB_TIMES" ) );
+ GroupPoints->PushButton1->setIcon( image2 );
+ GroupPoints->PushButton2->setIcon( image2 );
+ GroupPoints->LineEdit1->setReadOnly( true );
+ GroupPoints->LineEdit2->setReadOnly( true );
+
+ GroupDimensions = new DlgRef_2Sel4Spin1Check( centralWidget() );
+ GroupDimensions->GroupBox1->setTitle( tr( "GEOM_MULTIROTATION_DOUBLE" ) );
+ GroupDimensions->TextLabel1->setText( tr( "GEOM_MAIN_OBJECT" ) );
+ GroupDimensions->TextLabel2->setText( tr( "GEOM_VECTOR" ) );
+ GroupDimensions->TextLabel3->setText( tr( "GEOM_ANGLE" ) );
+ GroupDimensions->TextLabel4->setText( tr( "GEOM_NB_TIMES" ) );
+ GroupDimensions->TextLabel5->setText( tr( "GEOM_STEP" ) );
+ GroupDimensions->TextLabel6->setText( tr( "GEOM_NB_TIMES" ) );
+ GroupDimensions->CheckButton1->setText( tr( "GEOM_REVERSE" ) );
+ GroupDimensions->PushButton1->setIcon( image2 );
+ GroupDimensions->PushButton2->setIcon( image2 );
+ GroupDimensions->LineEdit1->setReadOnly( true );
+ GroupDimensions->LineEdit2->setReadOnly( true );
+
+ QVBoxLayout* layout = new QVBoxLayout( centralWidget() );
+ layout->setMargin( 0 ); layout->setSpacing( 6 );
+ layout->addWidget( GroupPoints );
+ layout->addWidget( GroupDimensions );
/***************************************************************/
+ setHelpFileName( "multi_rotation_operation_page.html" );
+
Init();
}
void TransformationGUI_MultiRotationDlg::Init()
{
/* Get setting of step value from file configuration */
- QString St = QAD_CONFIG->getSetting("Geometry:SettingsGeomStep");
- double step = St.toDouble();
+ SUIT_ResourceMgr* resMgr = SUIT_Session::session()->resourceMgr();
+ double step = resMgr->doubleValue( "Geometry", "SettingsGeomStep", 100 );
double SpecificStep1 = 5;
double SpecificStep2 = 1;
/* min, max, step and decimals for spin boxes & initial values */
- GroupPoints->SpinBox_DX->RangeStepAndValidator(1.0, 999.999, SpecificStep2, 3);
- GroupPoints->SpinBox_DX->SetValue(myNbTimes1);
-
- GroupDimensions->SpinBox_DX1->RangeStepAndValidator(-999.999, 999.999, SpecificStep1, 3);
- GroupDimensions->SpinBox_DY1->RangeStepAndValidator(1.0, 999.999, SpecificStep2, 3);
- GroupDimensions->SpinBox_DX2->RangeStepAndValidator(-999.999, 999.999, step, 3);
- GroupDimensions->SpinBox_DY2->RangeStepAndValidator(1.0, 999.999, SpecificStep2, 3);
- GroupDimensions->SpinBox_DX1->SetValue(myAng);
- GroupDimensions->SpinBox_DY1->SetValue(myNbTimes1);
- GroupDimensions->SpinBox_DX2->SetValue(myStep);
- GroupDimensions->SpinBox_DY2->SetValue(myNbTimes2);
+ initSpinBox( GroupPoints->SpinBox_DX, 1.0, MAX_NUMBER, SpecificStep2, 10 );
+ GroupPoints->SpinBox_DX->setValue( myNbTimes1 );
+
+ initSpinBox( GroupDimensions->SpinBox_DX1, COORD_MIN, COORD_MAX, SpecificStep1, 10 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( GroupDimensions->SpinBox_DY1, 1.0, MAX_NUMBER, SpecificStep2, 10 );
+ initSpinBox( GroupDimensions->SpinBox_DX2, COORD_MIN, COORD_MAX, step, 10 ); // VSR: TODO: DBL_DIGITS_DISPLAY
+ initSpinBox( GroupDimensions->SpinBox_DY2, 1.0, MAX_NUMBER, SpecificStep2, 10 );
+ GroupDimensions->SpinBox_DX1->setValue( myAng );
+ GroupDimensions->SpinBox_DY1->setValue( myNbTimes1 );
+ GroupDimensions->SpinBox_DX2->setValue( myStep );
+ GroupDimensions->SpinBox_DY2->setValue( myNbTimes2 );
/* signals and slots connections */
- connect(buttonOk, SIGNAL(clicked()), this, SLOT(ClickOnOk()));
- connect(buttonApply, SIGNAL(clicked()), this, SLOT(ClickOnApply()));
- connect(GroupConstructors, SIGNAL(clicked(int)), this, SLOT(ConstructorsClicked(int)));
-
- connect(GroupPoints->PushButton1, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
- connect(GroupPoints->PushButton2, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
- connect(GroupDimensions->PushButton1, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
- connect(GroupDimensions->PushButton2, SIGNAL(clicked()), this, SLOT(SetEditCurrentArgument()));
-
- connect(GroupPoints->LineEdit1, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
- connect(GroupPoints->LineEdit2, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
- connect(GroupDimensions->LineEdit1, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
- connect(GroupDimensions->LineEdit2, SIGNAL(returnPressed()), this, SLOT(LineEditReturnPressed()));
-
- connect(GroupPoints->SpinBox_DX, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
- connect(GroupDimensions->SpinBox_DX1, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
- connect(GroupDimensions->SpinBox_DY1, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
- connect(GroupDimensions->SpinBox_DX2, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
- connect(GroupDimensions->SpinBox_DY2, SIGNAL(valueChanged(double)), this, SLOT(ValueChangedInSpinBox(double)));
-
- connect(myGeomGUI, SIGNAL(SignalDefaultStepValueChanged(double)), GroupPoints->SpinBox_DX, SLOT(SetStep(double)));
- connect(myGeomGUI, SIGNAL(SignalDefaultStepValueChanged(double)), GroupDimensions->SpinBox_DX1, SLOT(SetStep(double)));
- connect(myGeomGUI, SIGNAL(SignalDefaultStepValueChanged(double)), GroupDimensions->SpinBox_DY1, SLOT(SetStep(double)));
- connect(myGeomGUI, SIGNAL(SignalDefaultStepValueChanged(double)), GroupDimensions->SpinBox_DX2, SLOT(SetStep(double)));
- connect(myGeomGUI, SIGNAL(SignalDefaultStepValueChanged(double)), GroupDimensions->SpinBox_DY2, SLOT(SetStep(double)));
-
- connect(GroupDimensions->CheckButton1, SIGNAL(toggled(bool)), this, SLOT(ReverseAngle()));
+ connect( buttonOk(), SIGNAL( clicked() ), this, SLOT( ClickOnOk() ) );
+ connect( buttonApply(), SIGNAL( clicked() ), this, SLOT( ClickOnApply() ) );
+
+ connect( this, SIGNAL( constructorsClicked( int ) ), this, SLOT( ConstructorsClicked( int ) ) );
+
+ connect( GroupPoints->PushButton1, SIGNAL( clicked() ), this, SLOT( SetEditCurrentArgument() ) );
+ connect( GroupPoints->PushButton2, SIGNAL( clicked() ), this, SLOT( SetEditCurrentArgument() ) );
+ connect( GroupDimensions->PushButton1, SIGNAL( clicked() ), this, SLOT( SetEditCurrentArgument() ) );
+ connect( GroupDimensions->PushButton2, SIGNAL( clicked() ), this, SLOT( SetEditCurrentArgument() ) );
+
+ connect( GroupPoints->LineEdit1, SIGNAL( returnPressed() ), this, SLOT( LineEditReturnPressed() ) );
+ connect( GroupPoints->LineEdit2, SIGNAL( returnPressed() ), this, SLOT( LineEditReturnPressed() ) );
+ connect( GroupDimensions->LineEdit1, SIGNAL( returnPressed() ), this, SLOT( LineEditReturnPressed() ) );
+ connect( GroupDimensions->LineEdit2, SIGNAL( returnPressed() ), this, SLOT( LineEditReturnPressed() ) );
+
+ connect( GroupPoints->SpinBox_DX, SIGNAL( valueChanged( double ) ), this, SLOT( ValueChangedInSpinBox( double ) ) );
+ connect( GroupDimensions->SpinBox_DX1, SIGNAL( valueChanged( double ) ), this, SLOT( ValueChangedInSpinBox( double ) ) );
+ connect( GroupDimensions->SpinBox_DY1, SIGNAL( valueChanged( double ) ), this, SLOT( ValueChangedInSpinBox( double ) ) );
+ connect( GroupDimensions->SpinBox_DX2, SIGNAL( valueChanged( double ) ), this, SLOT( ValueChangedInSpinBox( double ) ) );
+ connect( GroupDimensions->SpinBox_DY2, SIGNAL( valueChanged( double ) ), this, SLOT( ValueChangedInSpinBox( double ) ) );
+
+ // VSR: TODO ->>
+ connect( myGeomGUI, SIGNAL( SignalDefaultStepValueChanged( double ) ), GroupPoints->SpinBox_DX, SLOT( SetStep( double ) ) );
+ connect( myGeomGUI, SIGNAL( SignalDefaultStepValueChanged( double ) ), GroupDimensions->SpinBox_DX1, SLOT( SetStep( double ) ) );
+ connect( myGeomGUI, SIGNAL( SignalDefaultStepValueChanged( double ) ), GroupDimensions->SpinBox_DY1, SLOT( SetStep( double ) ) );
+ connect( myGeomGUI, SIGNAL( SignalDefaultStepValueChanged( double ) ), GroupDimensions->SpinBox_DX2, SLOT( SetStep( double ) ) );
+ connect( myGeomGUI, SIGNAL( SignalDefaultStepValueChanged( double ) ), GroupDimensions->SpinBox_DY2, SLOT( SetStep( double ) ) );
+ // <<-
+
+ connect( GroupDimensions->CheckButton1, SIGNAL( toggled( bool ) ), this, SLOT( ReverseAngle() ) );
- connect(mySelection, SIGNAL(currentSelectionChanged()), this, SLOT(SelectionIntoArgument()));
+ connect( myGeomGUI->getApp()->selectionMgr(),
+ SIGNAL( currentSelectionChanged() ), this, SLOT( SelectionIntoArgument() ) );
initName( tr( "GEOM_MULTIROTATION" ) );
+
ConstructorsClicked( 0 );
}
// function : ConstructorsClicked()
// purpose : Radio button management
//=================================================================================
-void TransformationGUI_MultiRotationDlg::ConstructorsClicked(int constructorId)
+void TransformationGUI_MultiRotationDlg::ConstructorsClicked( int constructorId )
{
- disconnect(mySelection, 0, this, 0);
-
+ disconnect( myGeomGUI->getApp()->selectionMgr(), 0, this, 0 );
+
myAng = 45.0;
myStep = 50.0;
myNbTimes1 = myNbTimes2 = 2;
-
+
globalSelection( GEOM_ALLSHAPES );
- switch (constructorId)
+ switch ( constructorId ) {
+ case 0: /* Rotate simple */
{
- case 0: /* Rotate simple */
- {
- GroupDimensions->hide();
- resize(0, 0);
- GroupPoints->show();
-
- myEditCurrentArgument = GroupPoints->LineEdit1;
- GroupPoints->LineEdit1->setText("");
- GroupPoints->LineEdit2->setText("");
-
- GroupPoints->SpinBox_DX->SetValue(myNbTimes1);
-
- break;
- }
- case 1: /* Rotate double */
- {
- GroupPoints->hide();
- resize(0, 0);
- GroupDimensions->show();
-
- myEditCurrentArgument = GroupDimensions->LineEdit1;
- GroupDimensions->LineEdit1->setText("");
- GroupDimensions->LineEdit2->setText("");
-
- GroupDimensions->SpinBox_DX1->SetValue(myAng);
- GroupDimensions->SpinBox_DY1->SetValue(myNbTimes1);
- GroupDimensions->SpinBox_DX2->SetValue(myStep);
- GroupDimensions->SpinBox_DY2->SetValue(myNbTimes2);
-
- break;
- }
+ GroupDimensions->hide();
+ GroupPoints->show();
+
+ myEditCurrentArgument = GroupPoints->LineEdit1;
+ GroupPoints->LineEdit1->setText( "" );
+ GroupPoints->LineEdit2->setText( "" );
+
+ GroupPoints->SpinBox_DX->setValue( myNbTimes1 );
+
+ break;
}
+ case 1: /* Rotate double */
+ {
+ GroupPoints->hide();
+ GroupDimensions->show();
+
+ myEditCurrentArgument = GroupDimensions->LineEdit1;
+ GroupDimensions->LineEdit1->setText( "" );
+ GroupDimensions->LineEdit2->setText( "" );
+
+ GroupDimensions->SpinBox_DX1->setValue( myAng );
+ GroupDimensions->SpinBox_DY1->setValue( myNbTimes1 );
+ GroupDimensions->SpinBox_DX2->setValue( myStep );
+ GroupDimensions->SpinBox_DY2->setValue( myNbTimes2 );
+
+ break;
+ }
+ }
+
+ qApp->processEvents();
+ updateGeometry();
+ resize( minimumSize() );
myEditCurrentArgument->setFocus();
myBase = myVector = GEOM::GEOM_Object::_nil();
- connect(mySelection, SIGNAL(currentSelectionChanged()), this, SLOT(SelectionIntoArgument()));
+ connect( myGeomGUI->getApp()->selectionMgr(), SIGNAL( currentSelectionChanged() ),
+ this, SLOT( SelectionIntoArgument() ) );
}
}
-//=======================================================================
-// function : ClickOnCancel()
-// purpose :
-//=======================================================================
-void TransformationGUI_MultiRotationDlg::ClickOnCancel()
-{
- GEOMBase_Skeleton::ClickOnCancel();
-}
-
-
//=================================================================================
// function : SelectionIntoArgument()
// purpose : Called when selection as changed or other case
//=================================================================================
void TransformationGUI_MultiRotationDlg::SelectionIntoArgument()
{
- myEditCurrentArgument->setText("");
-
- if(mySelection->IObjectCount() != 1) {
- if(myEditCurrentArgument == GroupPoints->LineEdit1 || myEditCurrentArgument == GroupDimensions->LineEdit1)
+ myEditCurrentArgument->setText( "" );
+
+ if ( IObjectCount() != 1 ) {
+ if ( myEditCurrentArgument == GroupPoints->LineEdit1 ||
+ myEditCurrentArgument == GroupDimensions->LineEdit1 )
myBase = GEOM::GEOM_Object::_nil();
- else if(myEditCurrentArgument == GroupPoints->LineEdit2 || myEditCurrentArgument == GroupDimensions->LineEdit2)
+ else if ( myEditCurrentArgument == GroupPoints->LineEdit2 ||
+ myEditCurrentArgument == GroupDimensions->LineEdit2 )
myVector = GEOM::GEOM_Object::_nil();
return;
}
-
+
// nbSel == 1
Standard_Boolean testResult = Standard_False;;
- GEOM::GEOM_Object_var aSelectedObject = GEOMBase::ConvertIOinGEOMObject(mySelection->firstIObject(), testResult );
+ GEOM::GEOM_Object_var aSelectedObject =
+ GEOMBase::ConvertIOinGEOMObject( firstIObject(), testResult );
- if ( !testResult || CORBA::is_nil( aSelectedObject ) || !GEOMBase::IsShape( aSelectedObject ) )
+ if ( !testResult || CORBA::is_nil( aSelectedObject) || !GEOMBase::IsShape( aSelectedObject ) )
return;
+ QString aName = GEOMBase::GetName( aSelectedObject );
- if(myEditCurrentArgument == GroupPoints->LineEdit1 || myEditCurrentArgument == GroupDimensions->LineEdit1)
+ if ( myEditCurrentArgument == GroupPoints->LineEdit1 ||
+ myEditCurrentArgument == GroupDimensions->LineEdit1 )
myBase = aSelectedObject;
- else if(myEditCurrentArgument == GroupPoints->LineEdit2 || myEditCurrentArgument == GroupDimensions->LineEdit2)
- myVector = aSelectedObject;
-
- myEditCurrentArgument->setText( GEOMBase::GetName( aSelectedObject ) );
+ else if ( myEditCurrentArgument == GroupPoints->LineEdit2 ||
+ myEditCurrentArgument == GroupDimensions->LineEdit2 ) {
+ if ( testResult && !aSelectedObject->_is_nil() ) {
+ TopoDS_Shape aShape;
+
+ if ( GEOMBase::GetShape( aSelectedObject, aShape, TopAbs_SHAPE ) && !aShape.IsNull() ) {
+ LightApp_SelectionMgr* aSelMgr = myGeomGUI->getApp()->selectionMgr();
+ TColStd_IndexedMapOfInteger aMap;
+ aSelMgr->GetIndexes( firstIObject(), aMap );
+ if ( aMap.Extent() == 1 ) {
+ int anIndex = aMap( 1 );
+ aName += QString( ":edge_%1" ).arg( anIndex );
+
+ //Find SubShape Object in Father
+ GEOM::GEOM_Object_var aFindedObject = findObjectInFather( aSelectedObject, aName );
+
+ if ( aFindedObject == GEOM::GEOM_Object::_nil() ) { // Object not found in study
+ GEOM::GEOM_IShapesOperations_var aShapesOp =
+ getGeomEngine()->GetIShapesOperations( getStudyId() );
+ myVector = aShapesOp->GetSubShape(aSelectedObject, anIndex);
+ }
+ else {
+ myVector = aFindedObject; // get existing object
+ }
+ }
+ else {
+ if ( aShape.ShapeType() != TopAbs_EDGE ) {
+ aSelectedObject = GEOM::GEOM_Object::_nil();
+ aName = "";
+ }
+ myVector = aSelectedObject;
+ }
+ }
+ }
+ }
+ myEditCurrentArgument->setText( aName );
displayPreview();
}
void TransformationGUI_MultiRotationDlg::SetEditCurrentArgument()
{
QPushButton* send = (QPushButton*)sender();
+ globalSelection( GEOM_ALLSHAPES );
- if(send == GroupPoints->PushButton1) {
+ if ( send == GroupPoints->PushButton1 ) {
myEditCurrentArgument = GroupPoints->LineEdit1;
- globalSelection( GEOM_ALLSHAPES );
}
- else if(send == GroupPoints->PushButton2) {
+ else if ( send == GroupPoints->PushButton2 ) {
myEditCurrentArgument = GroupPoints->LineEdit2;
- globalSelection( GEOM_LINE );
+ localSelection( GEOM::GEOM_Object::_nil(), TopAbs_EDGE );
}
- else if(send == GroupDimensions->PushButton1) {
+ else if ( send == GroupDimensions->PushButton1 ) {
myEditCurrentArgument = GroupDimensions->LineEdit1;
- globalSelection( GEOM_ALLSHAPES );
}
- else if(send == GroupDimensions->PushButton2) {
+ else if ( send == GroupDimensions->PushButton2 ) {
myEditCurrentArgument = GroupDimensions->LineEdit2;
- globalSelection( GEOM_LINE );
+ localSelection( GEOM::GEOM_Object::_nil(), TopAbs_EDGE );
}
myEditCurrentArgument->setFocus();
void TransformationGUI_MultiRotationDlg::LineEditReturnPressed()
{
QLineEdit* send = (QLineEdit*)sender();
- if(send == GroupPoints->LineEdit1 || send == GroupDimensions->LineEdit1 ||
- send == GroupPoints->LineEdit2 || send == GroupDimensions->LineEdit2)
- {
- myEditCurrentArgument = send;
- GEOMBase_Skeleton::LineEditReturnPressed();
- }
+ if ( send == GroupPoints->LineEdit1 || send == GroupDimensions->LineEdit1 ||
+ send == GroupPoints->LineEdit2 || send == GroupDimensions->LineEdit2 ) {
+ myEditCurrentArgument = send;
+ GEOMBase_Skeleton::LineEditReturnPressed();
+ }
}
void TransformationGUI_MultiRotationDlg::ActivateThisDialog()
{
GEOMBase_Skeleton::ActivateThisDialog();
- connect(mySelection, SIGNAL(currentSelectionChanged()), this, SLOT(SelectionIntoArgument()));
+ connect( myGeomGUI->getApp()->selectionMgr(),
+ SIGNAL( currentSelectionChanged() ), this, SLOT( SelectionIntoArgument() ) );
ConstructorsClicked( getConstructorId() );
}
-//=================================================================================
-// function : DeactivateActiveDialog()
-// purpose : public slot to deactivate if active
-//=================================================================================
-void TransformationGUI_MultiRotationDlg::DeactivateActiveDialog()
-{
- GEOMBase_Skeleton::DeactivateActiveDialog();
-}
-
-
//=================================================================================
// function : enterEvent()
// purpose :
//=================================================================================
-void TransformationGUI_MultiRotationDlg::enterEvent(QEvent* e)
+void TransformationGUI_MultiRotationDlg::enterEvent( QEvent* )
{
- if(!GroupConstructors->isEnabled())
+ if ( !mainFrame()->GroupConstructors->isEnabled() )
ActivateThisDialog();
}
// function : ValueChangedInSpinBox()
// purpose :
//=================================================================================
-void TransformationGUI_MultiRotationDlg::ValueChangedInSpinBox(double newValue)
+void TransformationGUI_MultiRotationDlg::ValueChangedInSpinBox( double newValue )
{
QObject* send = (QObject*)sender();
- if(send == GroupPoints->SpinBox_DX || send == GroupDimensions->SpinBox_DY1)
+ if ( send == GroupPoints->SpinBox_DX || send == GroupDimensions->SpinBox_DY1 )
myNbTimes1 = (int)newValue;
- else if(send == GroupDimensions->SpinBox_DX1)
+ else if ( send == GroupDimensions->SpinBox_DX1 )
myAng = newValue;
- else if(send == GroupDimensions->SpinBox_DX2)
+ else if ( send == GroupDimensions->SpinBox_DX2 )
myStep = newValue;
- else if(send == GroupDimensions->SpinBox_DY2)
+ else if ( send == GroupDimensions->SpinBox_DY2 )
myNbTimes2 = (int)newValue;
displayPreview();
int aConstructorId = getConstructorId();
- if(aConstructorId == 0)
- GroupPoints->SpinBox_DX->SetValue(myAng);
- else if(aConstructorId == 1)
- GroupDimensions->SpinBox_DX1->SetValue(myAng);
+ if ( aConstructorId == 0 )
+ GroupPoints->SpinBox_DX->setValue( myAng );
+ else if ( aConstructorId == 1 )
+ GroupDimensions->SpinBox_DX1->setValue( myAng );
displayPreview();
}
//=================================================================================
GEOM::GEOM_IOperations_ptr TransformationGUI_MultiRotationDlg::createOperation()
{
- return getGeomEngine()->GetITransformOperations( getStudyId() );
+ return myGeomGUI->GetGeomGen()->GetITransformOperations( getStudyId() );
}
// function : isValid
// purpose :
//=================================================================================
-bool TransformationGUI_MultiRotationDlg::isValid( QString& msg )
+bool TransformationGUI_MultiRotationDlg::isValid( QString& /*msg*/ )
{
- return !(myBase->_is_nil() || myVector->_is_nil());
+ return !( myBase->_is_nil() || myVector->_is_nil() );
}
//=================================================================================
GEOM::GEOM_Object_var anObj;
- switch ( getConstructorId() )
- {
- case 0 :
- {
- if ( !CORBA::is_nil( myBase ) && !CORBA::is_nil( myVector ) ) {
- anObj = GEOM::GEOM_ITransformOperations::_narrow( getOperation() )->MultiRotate1D( myBase, myVector, myNbTimes1 );
- res = true;
- }
- break;
- }
- case 1 :
- {
- if ( !CORBA::is_nil( myBase ) && !CORBA::is_nil( myVector ) )
- {
- anObj = GEOM::GEOM_ITransformOperations::_narrow( getOperation() )->MultiRotate2D( myBase, myVector, myAng, myNbTimes1, myStep, myNbTimes2 );
- res = true;
- }
- break;
- }
+ switch ( getConstructorId() ) {
+ case 0 :
+ if ( !CORBA::is_nil( myBase ) && !CORBA::is_nil( myVector ) ) {
+ anObj = GEOM::GEOM_ITransformOperations::_narrow( getOperation() )->
+ MultiRotate1D( myBase, myVector, myNbTimes1 );
+ res = true;
}
+ break;
+ case 1 :
+ if ( !CORBA::is_nil( myBase ) && !CORBA::is_nil( myVector ) ) {
+ anObj = GEOM::GEOM_ITransformOperations::_narrow( getOperation() )->
+ MultiRotate2D( myBase, myVector, myAng, myNbTimes1, myStep, myNbTimes2 );
+ res = true;
+ }
+ break;
+ }
if ( !anObj->_is_nil() )
objects.push_back( anObj._retn() );
return res;
}
-
//=================================================================================
-// function : closeEvent
-// purpose :
+// function : addSubshapeToStudy
+// purpose : virtual method to add new SubObjects if local selection
//=================================================================================
-void TransformationGUI_MultiRotationDlg::closeEvent( QCloseEvent* e )
+void TransformationGUI_MultiRotationDlg::addSubshapesToStudy()
{
- myGeomGUI->SetState( -1 );
- GEOMBase_Skeleton::closeEvent( e );
+ QMap<QString, GEOM::GEOM_Object_var> objMap;
+
+ switch ( getConstructorId() ) {
+ case 0:
+ objMap[GroupPoints->LineEdit2->text()] = myVector;
+ break;
+ case 1:
+ objMap[GroupDimensions->LineEdit2->text()] = myVector;
+ break;
+ }
+ addSubshapesToFather( objMap );
}