-// Copyright (C) 2007-2014 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2020 CEA/DEN, EDF R&D, OPEN CASCADE
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
#include "StdMeshers_ViscousLayers.hxx"
+#include "ObjectPool.hxx"
#include "SMDS_EdgePosition.hxx"
#include "SMDS_FaceOfNodes.hxx"
#include "SMDS_FacePosition.hxx"
#include "SMDS_MeshNode.hxx"
+#include "SMDS_PolygonalFaceOfNodes.hxx"
#include "SMDS_SetIterator.hxx"
#include "SMESHDS_Group.hxx"
#include "SMESHDS_Hypothesis.hxx"
+#include "SMESHDS_Mesh.hxx"
#include "SMESH_Algo.hxx"
+#include "SMESH_Block.hxx"
#include "SMESH_ComputeError.hxx"
#include "SMESH_ControlsDef.hxx"
#include "SMESH_Gen.hxx"
#include "SMESH_HypoFilter.hxx"
#include "SMESH_Mesh.hxx"
#include "SMESH_MeshAlgos.hxx"
+#include "SMESH_MeshEditor.hxx"
#include "SMESH_MesherHelper.hxx"
#include "SMESH_ProxyMesh.hxx"
#include "SMESH_subMesh.hxx"
#include "SMESH_subMeshEventListener.hxx"
#include "StdMeshers_FaceSide.hxx"
+#include "StdMeshers_ProjectionUtils.hxx"
+#include "StdMeshers_ViscousLayers2D.hxx"
#include <Adaptor3d_HSurface.hxx>
+#include <BRepAdaptor_Curve.hxx>
#include <BRepAdaptor_Curve2d.hxx>
#include <BRepAdaptor_Surface.hxx>
+//#include <BRepLProp_CLProps.hxx>
#include <BRepLProp_SLProps.hxx>
+#include <BRepOffsetAPI_MakeOffsetShape.hxx>
#include <BRep_Tool.hxx>
#include <Bnd_B2d.hxx>
#include <Bnd_B3d.hxx>
#include <ElCLib.hxx>
#include <GCPnts_AbscissaPoint.hxx>
+#include <GCPnts_TangentialDeflection.hxx>
#include <Geom2d_Circle.hxx>
#include <Geom2d_Line.hxx>
#include <Geom2d_TrimmedCurve.hxx>
#include <TopExp_Explorer.hxx>
#include <TopTools_IndexedMapOfShape.hxx>
#include <TopTools_ListOfShape.hxx>
+#include <TopTools_MapIteratorOfMapOfShape.hxx>
#include <TopTools_MapOfShape.hxx>
#include <TopoDS.hxx>
#include <TopoDS_Edge.hxx>
#include <gp_Vec.hxx>
#include <gp_XY.hxx>
-#include <list>
-#include <string>
#include <cmath>
#include <limits>
+#include <list>
+#include <queue>
+#include <string>
+#include <unordered_map>
#ifdef _DEBUG_
-#define __myDEBUG
+//#define __myDEBUG
//#define __NOT_INVALIDATE_BAD_SMOOTH
+//#define __NODES_AT_POS
#endif
+#define INCREMENTAL_SMOOTH // smooth only if min angle is too small
+#define BLOCK_INFLATION // of individual _LayerEdge's
+#define OLD_NEF_POLYGON
+
using namespace std;
//================================================================================
enum UIndex { U_TGT = 1, U_SRC, LEN_TGT };
const double theMinSmoothCosin = 0.1;
- const double theSmoothThickToElemSizeRatio = 0.3;
+ const double theSmoothThickToElemSizeRatio = 0.6;
+ const double theMinSmoothTriaAngle = 30;
+ const double theMinSmoothQuadAngle = 45;
// what part of thickness is allowed till intersection
// (defined by SALOME_TESTS/Grids/smesh/viscous_layers_00/A5)
{
return cosin * tgtThick > theSmoothThickToElemSizeRatio * elemSize;
}
+ double getSmoothingThickness( double cosin, double elemSize )
+ {
+ return theSmoothThickToElemSizeRatio * elemSize / cosin;
+ }
/*!
* \brief SMESH_ProxyMesh computed by _ViscousBuilder for a SOLID.
virtual void ProcessEvent(const int event,
const int eventType,
SMESH_subMesh* subMesh,
- SMESH_subMeshEventListenerData* data,
- const SMESH_Hypothesis* hyp)
+ SMESH_subMeshEventListenerData* /*data*/,
+ const SMESH_Hypothesis* /*hyp*/)
{
- if ( SMESH_subMesh::COMPUTE_EVENT == eventType &&
- SMESH_subMesh::CHECK_COMPUTE_STATE != event)
+ if (( SMESH_subMesh::COMPUTE_EVENT == eventType ) &&
+ ( SMESH_subMesh::CHECK_COMPUTE_STATE != event &&
+ SMESH_subMesh::SUBMESH_COMPUTED != event ))
{
// delete SMESH_ProxyMesh containing temporary faces
subMesh->DeleteEventListener( this );
const SMDS_MeshNode* nNext=0,
const SMDS_MeshNode* nOpp=0)
: _nPrev(nPrev), _nNext(nNext), _nOpp(nOpp) {}
- bool IsForward(const SMDS_MeshNode* nSrc, const gp_XYZ* pntTgt, double& vol) const
+ bool IsForward(const gp_XYZ* pntSrc, const gp_XYZ* pntTgt, double& vol) const
{
const double M[3][3] =
- {{ _nNext->X() - nSrc->X(), _nNext->Y() - nSrc->Y(), _nNext->Z() - nSrc->Z() },
- { pntTgt->X() - nSrc->X(), pntTgt->Y() - nSrc->Y(), pntTgt->Z() - nSrc->Z() },
- { _nPrev->X() - nSrc->X(), _nPrev->Y() - nSrc->Y(), _nPrev->Z() - nSrc->Z() }};
- vol = ( + M[0][0]*M[1][1]*M[2][2]
- + M[0][1]*M[1][2]*M[2][0]
- + M[0][2]*M[1][0]*M[2][1]
- - M[0][0]*M[1][2]*M[2][1]
- - M[0][1]*M[1][0]*M[2][2]
- - M[0][2]*M[1][1]*M[2][0]);
+ {{ _nNext->X() - pntSrc->X(), _nNext->Y() - pntSrc->Y(), _nNext->Z() - pntSrc->Z() },
+ { pntTgt->X() - pntSrc->X(), pntTgt->Y() - pntSrc->Y(), pntTgt->Z() - pntSrc->Z() },
+ { _nPrev->X() - pntSrc->X(), _nPrev->Y() - pntSrc->Y(), _nPrev->Z() - pntSrc->Z() }};
+ vol = ( + M[0][0] * M[1][1] * M[2][2]
+ + M[0][1] * M[1][2] * M[2][0]
+ + M[0][2] * M[1][0] * M[2][1]
+ - M[0][0] * M[1][2] * M[2][1]
+ - M[0][1] * M[1][0] * M[2][2]
+ - M[0][2] * M[1][1] * M[2][0]);
return vol > 1e-100;
}
+ bool IsForward(const SMDS_MeshNode* nSrc, const gp_XYZ& pTgt, double& vol) const
+ {
+ SMESH_TNodeXYZ pSrc( nSrc );
+ return IsForward( &pSrc, &pTgt, vol );
+ }
bool IsForward(const gp_XY& tgtUV,
const SMDS_MeshNode* smoothedNode,
const TopoDS_Face& face,
double d = v1 ^ v2;
return d*refSign > 1e-100;
}
+ bool IsMinAngleOK( const gp_XYZ& pTgt, double& minAngle ) const
+ {
+ SMESH_TNodeXYZ pPrev( _nPrev ), pNext( _nNext );
+ if ( !_nOpp ) // triangle
+ {
+ gp_Vec tp( pPrev - pTgt ), pn( pNext - pPrev ), nt( pTgt - pNext );
+ double tp2 = tp.SquareMagnitude();
+ double pn2 = pn.SquareMagnitude();
+ double nt2 = nt.SquareMagnitude();
+
+ if ( tp2 < pn2 && tp2 < nt2 )
+ minAngle = ( nt * -pn ) * ( nt * -pn ) / nt2 / pn2;
+ else if ( pn2 < nt2 )
+ minAngle = ( tp * -nt ) * ( tp * -nt ) / tp2 / nt2;
+ else
+ minAngle = ( pn * -tp ) * ( pn * -tp ) / pn2 / tp2;
+
+ static double theMaxCos2 = ( Cos( theMinSmoothTriaAngle * M_PI / 180. ) *
+ Cos( theMinSmoothTriaAngle * M_PI / 180. ));
+ return minAngle < theMaxCos2;
+ }
+ else // quadrangle
+ {
+ SMESH_TNodeXYZ pOpp( _nOpp );
+ gp_Vec tp( pPrev - pTgt ), po( pOpp - pPrev ), on( pNext - pOpp), nt( pTgt - pNext );
+ double tp2 = tp.SquareMagnitude();
+ double po2 = po.SquareMagnitude();
+ double on2 = on.SquareMagnitude();
+ double nt2 = nt.SquareMagnitude();
+ minAngle = Max( Max((( tp * -nt ) * ( tp * -nt ) / tp2 / nt2 ),
+ (( po * -tp ) * ( po * -tp ) / po2 / tp2 )),
+ Max((( on * -po ) * ( on * -po ) / on2 / po2 ),
+ (( nt * -on ) * ( nt * -on ) / nt2 / on2 )));
+
+ static double theMaxCos2 = ( Cos( theMinSmoothQuadAngle * M_PI / 180. ) *
+ Cos( theMinSmoothQuadAngle * M_PI / 180. ));
+ return minAngle < theMaxCos2;
+ }
+ }
bool IsNeighbour(const _Simplex& other) const
{
return _nPrev == other._nNext || _nNext == other._nPrev;
}
+ bool Includes( const SMDS_MeshNode* node ) const { return _nPrev == node || _nNext == node; }
static void GetSimplices( const SMDS_MeshNode* node,
vector<_Simplex>& simplices,
const set<TGeomID>& ingnoreShapes,
*/
struct _Curvature
{
- double _r; // radius
- double _k; // factor to correct node smoothed position
- double _h2lenRatio; // avgNormProj / (2*avgDist)
+ double _r; // radius
+ double _k; // factor to correct node smoothed position
+ double _h2lenRatio; // avgNormProj / (2*avgDist)
+ gp_Pnt2d _uv; // UV used in putOnOffsetSurface()
public:
- static _Curvature* New( double avgNormProj, double avgDist )
- {
- _Curvature* c = 0;
- if ( fabs( avgNormProj / avgDist ) > 1./200 )
- {
- c = new _Curvature;
- c->_r = avgDist * avgDist / avgNormProj;
- c->_k = avgDist * avgDist / c->_r / c->_r;
- //c->_k = avgNormProj / c->_r;
- c->_k *= ( c->_r < 0 ? 1/1.1 : 1.1 ); // not to be too restrictive
- c->_h2lenRatio = avgNormProj / ( avgDist + avgDist );
- }
- return c;
- }
+ static _Curvature* New( double avgNormProj, double avgDist );
double lenDelta(double len) const { return _k * ( _r + len ); }
double lenDeltaByDist(double dist) const { return dist * _h2lenRatio; }
};
struct _2NearEdges;
struct _LayerEdge;
+ struct _EdgesOnShape;
+ struct _Smoother1D;
typedef map< const SMDS_MeshNode*, _LayerEdge*, TIDCompare > TNode2Edge;
//--------------------------------------------------------------------------------
vector< const SMDS_MeshNode*> _nodes;
- gp_XYZ _normal; // to solid surface
- vector<gp_XYZ> _pos; // points computed during inflation
- double _len; // length achived with the last inflation step
- double _cosin; // of angle (_normal ^ surface)
+ gp_XYZ _normal; // to boundary of solid
+ vector<gp_XYZ> _pos; // points computed during inflation
+ double _len; // length achieved with the last inflation step
+ double _maxLen; // maximal possible length
+ double _cosin; // of angle (_normal ^ surface)
+ double _minAngle; // of _simplices
double _lenFactor; // to compute _len taking _cosin into account
+ int _flags;
- // face or edge w/o layer along or near which _LayerEdge is inflated
- TopoDS_Shape _sWOL;
// simplices connected to the source node (_nodes[0]);
// used for smoothing and quality check of _LayerEdge's based on the FACE
vector<_Simplex> _simplices;
+ vector<_LayerEdge*> _neibors; // all surrounding _LayerEdge's
PSmooFun _smooFunction; // smoothing function
+ _Curvature* _curvature;
// data for smoothing of _LayerEdge's based on the EDGE
_2NearEdges* _2neibors;
- _Curvature* _curvature;
- // TODO:: detele _Curvature, _plnNorm
-
- void SetNewLength( double len, SMESH_MesherHelper& helper );
+ enum EFlags { TO_SMOOTH = 0x0000001,
+ MOVED = 0x0000002, // set by _neibors[i]->SetNewLength()
+ SMOOTHED = 0x0000004, // set by _LayerEdge::Smooth()
+ DIFFICULT = 0x0000008, // near concave VERTEX
+ ON_CONCAVE_FACE = 0x0000010,
+ BLOCKED = 0x0000020, // not to inflate any more
+ INTERSECTED = 0x0000040, // close intersection with a face found
+ NORMAL_UPDATED = 0x0000080,
+ UPD_NORMAL_CONV = 0x0000100, // to update normal on boundary of concave FACE
+ MARKED = 0x0000200, // local usage
+ MULTI_NORMAL = 0x0000400, // a normal is invisible by some of surrounding faces
+ NEAR_BOUNDARY = 0x0000800, // is near FACE boundary forcing smooth
+ SMOOTHED_C1 = 0x0001000, // is on _eosC1
+ DISTORTED = 0x0002000, // was bad before smoothing
+ RISKY_SWOL = 0x0004000, // SWOL is parallel to a source FACE
+ SHRUNK = 0x0008000, // target node reached a tgt position while shrink()
+ UNUSED_FLAG = 0x0100000 // to add user flags after
+ };
+ bool Is ( int flag ) const { return _flags & flag; }
+ void Set ( int flag ) { _flags |= flag; }
+ void Unset( int flag ) { _flags &= ~flag; }
+ std::string DumpFlags() const; // debug
+
+ void SetNewLength( double len, _EdgesOnShape& eos, SMESH_MesherHelper& helper );
bool SetNewLength2d( Handle(Geom_Surface)& surface,
const TopoDS_Face& F,
+ _EdgesOnShape& eos,
SMESH_MesherHelper& helper );
void SetDataByNeighbors( const SMDS_MeshNode* n1,
const SMDS_MeshNode* n2,
+ const _EdgesOnShape& eos,
SMESH_MesherHelper& helper);
- void InvalidateStep( int curStep, bool restoreLength=false );
+ void Block( _SolidData& data );
+ void InvalidateStep( size_t curStep, const _EdgesOnShape& eos, bool restoreLength=false );
void ChooseSmooFunction(const set< TGeomID >& concaveVertices,
const TNode2Edge& n2eMap);
- bool Smooth(int& badNb, const int step, const bool isConcaveFace);
- bool SmoothOnEdge(Handle(Geom_Surface)& surface,
- const TopoDS_Face& F,
- SMESH_MesherHelper& helper);
+ void SmoothPos( const vector< double >& segLen, const double tol );
+ int GetSmoothedPos( const double tol );
+ int Smooth(const int step, const bool isConcaveFace, bool findBest);
+ int Smooth(const int step, bool findBest, vector< _LayerEdge* >& toSmooth );
+ int CheckNeiborsOnBoundary(vector< _LayerEdge* >* badNeibors = 0, bool * needSmooth = 0 );
+ void SmoothWoCheck();
+ bool SmoothOnEdge(Handle(ShapeAnalysis_Surface)& surface,
+ const TopoDS_Face& F,
+ SMESH_MesherHelper& helper);
+ void MoveNearConcaVer( const _EdgesOnShape* eov,
+ const _EdgesOnShape* eos,
+ const int step,
+ vector< _LayerEdge* > & badSmooEdges);
bool FindIntersection( SMESH_ElementSearcher& searcher,
double & distance,
const double& epsilon,
+ _EdgesOnShape& eos,
const SMDS_MeshElement** face = 0);
+ bool SegTriaInter( const gp_Ax1& lastSegment,
+ const gp_XYZ& p0,
+ const gp_XYZ& p1,
+ const gp_XYZ& p2,
+ double& dist,
+ const double& epsilon) const;
bool SegTriaInter( const gp_Ax1& lastSegment,
const SMDS_MeshNode* n0,
const SMDS_MeshNode* n1,
const SMDS_MeshNode* n2,
double& dist,
- const double& epsilon) const;
- gp_Ax1 LastSegment(double& segLen) const;
- gp_XY LastUV( const TopoDS_Face& F ) const;
+ const double& epsilon) const
+ { return SegTriaInter( lastSegment,
+ SMESH_TNodeXYZ( n0 ), SMESH_TNodeXYZ( n1 ), SMESH_TNodeXYZ( n2 ),
+ dist, epsilon );
+ }
+ const gp_XYZ& PrevPos() const { return _pos[ _pos.size() - 2 ]; }
+ gp_XYZ PrevCheckPos( _EdgesOnShape* eos=0 ) const;
+ gp_Ax1 LastSegment(double& segLen, _EdgesOnShape& eos) const;
+ gp_XY LastUV( const TopoDS_Face& F, _EdgesOnShape& eos, int which=-1 ) const;
bool IsOnEdge() const { return _2neibors; }
- gp_XYZ Copy( _LayerEdge& other, SMESH_MesherHelper& helper );
+ bool IsOnFace() const { return ( _nodes[0]->GetPosition()->GetDim() == 2 ); }
+ int BaseShapeDim() const { return _nodes[0]->GetPosition()->GetDim(); }
+ gp_XYZ Copy( _LayerEdge& other, _EdgesOnShape& eos, SMESH_MesherHelper& helper );
void SetCosin( double cosin );
+ void SetNormal( const gp_XYZ& n ) { _normal = n; }
+ void SetMaxLen( double l ) { _maxLen = l; }
int NbSteps() const { return _pos.size() - 1; } // nb inlation steps
+ bool IsNeiborOnEdge( const _LayerEdge* edge ) const;
+ void SetSmooLen( double len ) { // set _len at which smoothing is needed
+ _cosin = len; // as for _LayerEdge's on FACE _cosin is not used
+ }
+ double GetSmooLen() { return _cosin; } // for _LayerEdge's on FACE _cosin is not used
gp_XYZ smoothLaplacian();
gp_XYZ smoothAngular();
{
return _inNorm * ( p - _pos ) < -tol;
}
- bool FindInterestion( const _halfPlane& hp, gp_XY & intPnt )
+ bool FindIntersection( const _halfPlane& hp, gp_XY & intPnt )
{
- const double eps = 1e-10;
+ //const double eps = 1e-10;
double D = _dir.Crossed( hp._dir );
if ( fabs(D) < std::numeric_limits<double>::min())
return false;
gp_XYZ* _plnNorm;
_2NearEdges() { _edges[0]=_edges[1]=0; _plnNorm = 0; }
+ ~_2NearEdges(){ delete _plnNorm; }
const SMDS_MeshNode* tgtNode(bool is2nd) {
return _edges[is2nd] ? _edges[is2nd]->_nodes.back() : 0;
}
std::swap( _wgt [0], _wgt [1] );
std::swap( _edges[0], _edges[1] );
}
+ void set( _LayerEdge* e1, _LayerEdge* e2, double w1, double w2 ) {
+ _edges[0] = e1; _edges[1] = e2; _wgt[0] = w1; _wgt[1] = w2;
+ }
+ bool include( const _LayerEdge* e ) {
+ return ( _edges[0] == e || _edges[1] == e );
+ }
};
- //--------------------------------------------------------------------------------
- /*!
- * \brief Convex FACE whose radius of curvature is less than the thickness of
- * layers. It is used to detect distortion of prisms based on a convex
- * FACE and to update normals to enable further increasing the thickness
- */
- struct _ConvexFace
- {
- TopoDS_Face _face;
-
- // edges whose _simplices are used to detect prism destorsion
- vector< _LayerEdge* > _simplexTestEdges;
-
- // map a sub-shape to it's index in _SolidData::_endEdgeOnShape vector
- map< TGeomID, int > _subIdToEdgeEnd;
-
- bool _normalsFixed;
- bool GetCenterOfCurvature( _LayerEdge* ledge,
- BRepLProp_SLProps& surfProp,
- SMESH_MesherHelper& helper,
- gp_Pnt & center ) const;
- bool CheckPrisms() const;
- };
//--------------------------------------------------------------------------------
/*!
struct AverageHyp
{
AverageHyp( const StdMeshers_ViscousLayers* hyp = 0 )
- :_nbLayers(0), _nbHyps(0), _thickness(0), _stretchFactor(0)
+ :_nbLayers(0), _nbHyps(0), _method(0), _thickness(0), _stretchFactor(0)
{
Add( hyp );
}
//_thickness += hyp->GetTotalThickness();
_thickness = Max( _thickness, hyp->GetTotalThickness() );
_stretchFactor += hyp->GetStretchFactor();
+ _method = hyp->GetMethod();
+ if ( _groupName.empty() )
+ _groupName = hyp->GetGroupName();
}
}
double GetTotalThickness() const { return _thickness; /*_nbHyps ? _thickness / _nbHyps : 0;*/ }
double GetStretchFactor() const { return _nbHyps ? _stretchFactor / _nbHyps : 0; }
int GetNumberLayers() const { return _nbLayers; }
+ int GetMethod() const { return _method; }
+ bool ToCreateGroup() const { return !_groupName.empty(); }
+ const std::string& GetGroupName() const { return _groupName; }
+
+ bool UseSurfaceNormal() const
+ { return _method == StdMeshers_ViscousLayers::SURF_OFFSET_SMOOTH; }
+ bool ToSmooth() const
+ { return _method == StdMeshers_ViscousLayers::SURF_OFFSET_SMOOTH; }
+ bool IsOffsetMethod() const
+ { return _method == StdMeshers_ViscousLayers::FACE_OFFSET; }
+
+ bool operator==( const AverageHyp& other ) const
+ {
+ return ( _nbLayers == other._nbLayers &&
+ _method == other._method &&
+ Equals( GetTotalThickness(), other.GetTotalThickness() ) &&
+ Equals( GetStretchFactor(), other.GetStretchFactor() ));
+ }
+ static bool Equals( double v1, double v2 ) { return Abs( v1 - v2 ) < 0.01 * ( v1 + v2 ); }
+
private:
- int _nbLayers, _nbHyps;
- double _thickness, _stretchFactor;
+ int _nbLayers, _nbHyps, _method;
+ double _thickness, _stretchFactor;
+ std::string _groupName;
+ };
+
+ //--------------------------------------------------------------------------------
+ /*!
+ * \brief _LayerEdge's on a shape and other shape data
+ */
+ struct _EdgesOnShape
+ {
+ vector< _LayerEdge* > _edges;
+
+ TopoDS_Shape _shape;
+ TGeomID _shapeID;
+ SMESH_subMesh * _subMesh;
+ // face or edge w/o layer along or near which _edges are inflated
+ TopoDS_Shape _sWOL;
+ bool _isRegularSWOL; // w/o singularities
+ // averaged StdMeshers_ViscousLayers parameters
+ AverageHyp _hyp;
+ bool _toSmooth;
+ _Smoother1D* _edgeSmoother;
+ vector< _EdgesOnShape* > _eosConcaVer; // edges at concave VERTEXes of a FACE
+ vector< _EdgesOnShape* > _eosC1; // to smooth together several C1 continues shapes
+
+ typedef std::unordered_map< const SMDS_MeshElement*, gp_XYZ > TFace2NormMap;
+ TFace2NormMap _faceNormals; // if _shape is FACE
+ vector< _EdgesOnShape* > _faceEOS; // to get _faceNormals of adjacent FACEs
+
+ Handle(ShapeAnalysis_Surface) _offsetSurf;
+ _LayerEdge* _edgeForOffset;
+
+ _SolidData* _data; // parent SOLID
+
+ _LayerEdge* operator[](size_t i) const { return (_LayerEdge*) _edges[i]; }
+ size_t size() const { return _edges.size(); }
+ TopAbs_ShapeEnum ShapeType() const
+ { return _shape.IsNull() ? TopAbs_SHAPE : _shape.ShapeType(); }
+ TopAbs_ShapeEnum SWOLType() const
+ { return _sWOL.IsNull() ? TopAbs_SHAPE : _sWOL.ShapeType(); }
+ bool HasC1( const _EdgesOnShape* other ) const
+ { return std::find( _eosC1.begin(), _eosC1.end(), other ) != _eosC1.end(); }
+ bool GetNormal( const SMDS_MeshElement* face, gp_Vec& norm );
+ _SolidData& GetData() const { return *_data; }
+
+ _EdgesOnShape(): _shapeID(-1), _subMesh(0), _toSmooth(false), _edgeSmoother(0) {}
+ ~_EdgesOnShape();
+ };
+
+ //--------------------------------------------------------------------------------
+ /*!
+ * \brief Convex FACE whose radius of curvature is less than the thickness of
+ * layers. It is used to detect distortion of prisms based on a convex
+ * FACE and to update normals to enable further increasing the thickness
+ */
+ struct _ConvexFace
+ {
+ TopoDS_Face _face;
+
+ // edges whose _simplices are used to detect prism distortion
+ vector< _LayerEdge* > _simplexTestEdges;
+
+ // map a sub-shape to _SolidData::_edgesOnShape
+ map< TGeomID, _EdgesOnShape* > _subIdToEOS;
+
+ bool _isTooCurved;
+ bool _normalsFixed;
+ bool _normalsFixedOnBorders; // used in putOnOffsetSurface()
+
+ double GetMaxCurvature( _SolidData& data,
+ _EdgesOnShape& eof,
+ BRepLProp_SLProps& surfProp,
+ SMESH_MesherHelper& helper);
+
+ bool GetCenterOfCurvature( _LayerEdge* ledge,
+ BRepLProp_SLProps& surfProp,
+ SMESH_MesherHelper& helper,
+ gp_Pnt & center ) const;
+ bool CheckPrisms() const;
+ };
+
+ //--------------------------------------------------------------------------------
+ /*!
+ * \brief Structure holding _LayerEdge's based on EDGEs that will collide
+ * at inflation up to the full thickness. A detected collision
+ * is fixed in updateNormals()
+ */
+ struct _CollisionEdges
+ {
+ _LayerEdge* _edge;
+ vector< _LayerEdge* > _intEdges; // each pair forms an intersected quadrangle
+ const SMDS_MeshNode* nSrc(int i) const { return _intEdges[i]->_nodes[0]; }
+ const SMDS_MeshNode* nTgt(int i) const { return _intEdges[i]->_nodes.back(); }
};
//--------------------------------------------------------------------------------
{
typedef const StdMeshers_ViscousLayers* THyp;
TopoDS_Shape _solid;
+ TopTools_MapOfShape _before; // SOLIDs to be computed before _solid
TGeomID _index; // SOLID id
_MeshOfSolid* _proxyMesh;
+ bool _done;
list< THyp > _hyps;
list< TopoDS_Shape > _hypShapes;
map< TGeomID, THyp > _face2hyp; // filled if _hyps.size() > 1
// map to find _n2eMap of another _SolidData by a shrink shape shared by two _SolidData's
map< TGeomID, TNode2Edge* > _s2neMap;
- // edges of _n2eMap. We keep same data in two containers because
- // iteration over the map is 5 times longer than over the vector
- vector< _LayerEdge* > _edges;
+ // _LayerEdge's with underlying shapes
+ vector< _EdgesOnShape > _edgesOnShape;
- // key: an id of shape (EDGE or VERTEX) shared by a FACE with
+ // key: an ID of shape (EDGE or VERTEX) shared by a FACE with
// layers and a FACE w/o layers
// value: the shape (FACE or EDGE) to shrink mesh on.
// _LayerEdge's basing on nodes on key shape are inflated along the value shape
// Convex FACEs whose radius of curvature is less than the thickness of layers
map< TGeomID, _ConvexFace > _convexFaces;
- // shapes (EDGEs and VERTEXes) srink from which is forbidden due to collisions with
+ // shapes (EDGEs and VERTEXes) shrink from which is forbidden due to collisions with
// the adjacent SOLID
set< TGeomID > _noShrinkShapes;
- // <EDGE to smooth on> to <it's curve> -- for analytic smooth
- map< TGeomID,Handle(Geom_Curve)> _edge2curve;
-
- // end indices in _edges of _LayerEdge on each shape, first go shapes to smooth
- vector< int > _endEdgeOnShape;
int _nbShapesToSmooth;
+
+ vector< _CollisionEdges > _collisionEdges;
set< TGeomID > _concaveFaces;
- // data of averaged StdMeshers_ViscousLayers parameters for each shape with _LayerEdge's
- vector< AverageHyp > _hypOnShape;
double _maxThickness; // of all _hyps
double _minThickness; // of all _hyps
double _epsilon; // precision for SegTriaInter()
+ SMESH_MesherHelper* _helper;
+
_SolidData(const TopoDS_Shape& s=TopoDS_Shape(),
_MeshOfSolid* m=0)
- :_solid(s), _proxyMesh(m) {}
- ~_SolidData();
-
- Handle(Geom_Curve) CurveForSmooth( const TopoDS_Edge& E,
- const int iFrom,
- const int iTo,
- const TopoDS_Face& F,
- SMESH_MesherHelper& helper,
- vector<_LayerEdge* >* edges=0);
+ :_solid(s), _proxyMesh(m), _done(false),_helper(0) {}
+ ~_SolidData() { delete _helper; _helper = 0; }
- void SortOnEdge( const TopoDS_Edge& E,
- const int iFrom,
- const int iTo,
- SMESH_MesherHelper& helper);
+ void SortOnEdge( const TopoDS_Edge& E, vector< _LayerEdge* >& edges);
+ void Sort2NeiborsOnEdge( vector< _LayerEdge* >& edges );
- void Sort2NeiborsOnEdge( const int iFrom, const int iTo);
-
- _ConvexFace* GetConvexFace( const TGeomID faceID )
- {
+ _ConvexFace* GetConvexFace( const TGeomID faceID ) {
map< TGeomID, _ConvexFace >::iterator id2face = _convexFaces.find( faceID );
return id2face == _convexFaces.end() ? 0 : & id2face->second;
}
- void GetEdgesOnShape( size_t end, int & iBeg, int & iEnd )
- {
- iBeg = end > 0 ? _endEdgeOnShape[ end-1 ] : 0;
- iEnd = _endEdgeOnShape[ end ];
- }
+ _EdgesOnShape* GetShapeEdges(const TGeomID shapeID );
+ _EdgesOnShape* GetShapeEdges(const TopoDS_Shape& shape );
+ _EdgesOnShape* GetShapeEdges(const _LayerEdge* edge )
+ { return GetShapeEdges( edge->_nodes[0]->getshapeId() ); }
- bool GetShapeEdges(const TGeomID shapeID, size_t& iEdgeEnd, int* iBeg=0, int* iEnd=0 ) const;
+ SMESH_MesherHelper& GetHelper() const { return *_helper; }
- void AddShapesToSmooth( const set< TGeomID >& shapeIDs );
+ void UnmarkEdges( int flag = _LayerEdge::MARKED ) {
+ for ( size_t i = 0; i < _edgesOnShape.size(); ++i )
+ for ( size_t j = 0; j < _edgesOnShape[i]._edges.size(); ++j )
+ _edgesOnShape[i]._edges[j]->Unset( flag );
+ }
+ void AddShapesToSmooth( const set< _EdgesOnShape* >& shape,
+ const set< _EdgesOnShape* >* edgesNoAnaSmooth=0 );
- void PrepareEdgesToSmoothOnFace( _LayerEdge** edgeBeg,
- _LayerEdge** edgeEnd,
- const TopoDS_Face& face,
- bool substituteSrcNodes );
+ void PrepareEdgesToSmoothOnFace( _EdgesOnShape* eof, bool substituteSrcNodes );
+ };
+ //--------------------------------------------------------------------------------
+ /*!
+ * \brief Offset plane used in getNormalByOffset()
+ */
+ struct _OffsetPlane
+ {
+ gp_Pln _plane;
+ int _faceIndex;
+ int _faceIndexNext[2];
+ gp_Lin _lines[2]; // line of intersection with neighbor _OffsetPlane's
+ bool _isLineOK[2];
+ _OffsetPlane() {
+ _isLineOK[0] = _isLineOK[1] = false; _faceIndexNext[0] = _faceIndexNext[1] = -1;
+ }
+ void ComputeIntersectionLine( _OffsetPlane& pln,
+ const TopoDS_Edge& E,
+ const TopoDS_Vertex& V );
+ gp_XYZ GetCommonPoint(bool& isFound, const TopoDS_Vertex& V) const;
+ int NbLines() const { return _isLineOK[0] + _isLineOK[1]; }
};
//--------------------------------------------------------------------------------
/*!
void Append( const gp_Pnt& center, _LayerEdge* ledge )
{
+ if ( ledge->Is( _LayerEdge::MULTI_NORMAL ))
+ return;
if ( _curvaCenters.size() > 0 )
_segLength2.push_back( center.SquareDistance( _curvaCenters.back() ));
_curvaCenters.push_back( center );
bool FindNewNormal( const gp_Pnt& center, gp_XYZ& newNormal );
void SetShapes( const TopoDS_Edge& edge,
const _ConvexFace& convFace,
- const _SolidData& data,
+ _SolidData& data,
SMESH_MesherHelper& helper);
};
//--------------------------------------------------------------------------------
const gp_XY& uvToFix,
const double refSign );
};
+ struct PyDump;
+ struct Periodicity;
//--------------------------------------------------------------------------------
/*!
* \brief Builder of viscous layers
private:
- bool findSolidsWithLayers();
+ bool findSolidsWithLayers(const bool checkFaceMesh=true);
+ bool setBefore( _SolidData& solidBefore, _SolidData& solidAfter );
bool findFacesWithLayers(const bool onlyWith=false);
+ void findPeriodicFaces();
void getIgnoreFaces(const TopoDS_Shape& solid,
const StdMeshers_ViscousLayers* hyp,
const TopoDS_Shape& hypShape,
set<TGeomID>& ignoreFaces);
+ void makeEdgesOnShape();
bool makeLayer(_SolidData& data);
- bool setEdgeData(_LayerEdge& edge, const set<TGeomID>& subIds,
- SMESH_MesherHelper& helper, _SolidData& data);
+ void setShapeData( _EdgesOnShape& eos, SMESH_subMesh* sm, _SolidData& data );
+ bool setEdgeData( _LayerEdge& edge, _EdgesOnShape& eos,
+ SMESH_MesherHelper& helper, _SolidData& data);
gp_XYZ getFaceNormal(const SMDS_MeshNode* n,
const TopoDS_Face& face,
SMESH_MesherHelper& helper,
const TopoDS_Face& face,
SMESH_MesherHelper& helper,
gp_Dir& normal );
- gp_XYZ getWeigthedNormal( const SMDS_MeshNode* n,
+ gp_XYZ getWeigthedNormal( const _LayerEdge* edge );
+ gp_XYZ getNormalByOffset( _LayerEdge* edge,
std::pair< TopoDS_Face, gp_XYZ > fId2Normal[],
- int nbFaces );
+ int nbFaces,
+ bool lastNoOffset = false);
bool findNeiborsOnEdge(const _LayerEdge* edge,
const SMDS_MeshNode*& n1,
const SMDS_MeshNode*& n2,
+ _EdgesOnShape& eos,
_SolidData& data);
void findSimplexTestEdges( _SolidData& data,
vector< vector<_LayerEdge*> >& edgesByGeom);
void computeGeomSize( _SolidData& data );
- bool sortEdges( _SolidData& data,
- vector< vector<_LayerEdge*> >& edgesByGeom);
+ bool findShapesToSmooth( _SolidData& data);
void limitStepSizeByCurvature( _SolidData& data );
void limitStepSize( _SolidData& data,
const SMDS_MeshElement* face,
void limitStepSize( _SolidData& data, const double minSize);
bool inflate(_SolidData& data);
bool smoothAndCheck(_SolidData& data, const int nbSteps, double & distToIntersection);
- bool smoothAnalyticEdge( _SolidData& data,
- const int iFrom,
- const int iTo,
- Handle(Geom_Surface)& surface,
- const TopoDS_Face& F,
- SMESH_MesherHelper& helper);
- bool updateNormals( _SolidData& data, SMESH_MesherHelper& helper, int stepNb );
+ int invalidateBadSmooth( _SolidData& data,
+ SMESH_MesherHelper& helper,
+ vector< _LayerEdge* >& badSmooEdges,
+ vector< _EdgesOnShape* >& eosC1,
+ const int infStep );
+ void makeOffsetSurface( _EdgesOnShape& eos, SMESH_MesherHelper& );
+ void putOnOffsetSurface( _EdgesOnShape& eos, int infStep,
+ vector< _EdgesOnShape* >& eosC1,
+ int smooStep=0, int moveAll=false );
+ void findCollisionEdges( _SolidData& data, SMESH_MesherHelper& helper );
+ void findEdgesToUpdateNormalNearConvexFace( _ConvexFace & convFace,
+ _SolidData& data,
+ SMESH_MesherHelper& helper );
+ void limitMaxLenByCurvature( _SolidData& data, SMESH_MesherHelper& helper );
+ void limitMaxLenByCurvature( _LayerEdge* e1, _LayerEdge* e2,
+ _EdgesOnShape& eos1, _EdgesOnShape& eos2,
+ const bool isSmoothable );
+ bool updateNormals( _SolidData& data, SMESH_MesherHelper& helper, int stepNb, double stepSize );
bool updateNormalsOfConvexFaces( _SolidData& data,
SMESH_MesherHelper& helper,
int stepNb );
+ void updateNormalsOfC1Vertices( _SolidData& data );
+ bool updateNormalsOfSmoothed( _SolidData& data,
+ SMESH_MesherHelper& helper,
+ const int nbSteps,
+ const double stepSize );
+ bool isNewNormalOk( _SolidData& data,
+ _LayerEdge& edge,
+ const gp_XYZ& newNormal);
bool refine(_SolidData& data);
- bool shrink();
- bool prepareEdgeToShrink( _LayerEdge& edge, const TopoDS_Face& F,
+ bool shrink(_SolidData& data);
+ bool prepareEdgeToShrink( _LayerEdge& edge, _EdgesOnShape& eos,
SMESH_MesherHelper& helper,
const SMESHDS_SubMesh* faceSubMesh );
void restoreNoShrink( _LayerEdge& edge ) const;
const bool is2D,
const int step,
set<const SMDS_MeshNode*> * involvedNodes=NULL);
- bool addBoundaryElements();
+ bool addBoundaryElements(_SolidData& data);
bool error( const string& text, int solidID=-1 );
SMESHDS_Mesh* getMeshDS() const { return _mesh->GetMeshDS(); }
// debug
void makeGroupOfLE();
- SMESH_Mesh* _mesh;
- SMESH_ComputeErrorPtr _error;
+ SMESH_Mesh* _mesh;
+ SMESH_ComputeErrorPtr _error;
+
+ vector< _SolidData > _sdVec;
+ TopTools_IndexedMapOfShape _solids; // to find _SolidData by a solid
+ TopTools_MapOfShape _shrunkFaces;
+ std::unique_ptr<Periodicity> _periodicity;
- vector< _SolidData > _sdVec;
- int _tmpFaceID;
+ int _tmpFaceID;
+ PyDump* _pyDump;
};
//--------------------------------------------------------------------------------
/*!
*/
class _Shrinker1D
{
+ TopoDS_Edge _geomEdge;
vector<double> _initU;
vector<double> _normPar;
vector<const SMDS_MeshNode*> _nodes;
const _LayerEdge* _edges[2];
bool _done;
public:
- void AddEdge( const _LayerEdge* e, SMESH_MesherHelper& helper );
+ void AddEdge( const _LayerEdge* e, _EdgesOnShape& eos, SMESH_MesherHelper& helper );
void Compute(bool set3D, SMESH_MesherHelper& helper);
void RestoreParams();
void SwapSrcTgtNodes(SMESHDS_Mesh* mesh);
+ const TopoDS_Edge& GeomEdge() const { return _geomEdge; }
+ const SMDS_MeshNode* TgtNode( bool is2nd ) const
+ { return _edges[is2nd] ? _edges[is2nd]->_nodes.back() : 0; }
+ const SMDS_MeshNode* SrcNode( bool is2nd ) const
+ { return _edges[is2nd] ? _edges[is2nd]->_nodes[0] : 0; }
+ };
+ //--------------------------------------------------------------------------------
+ /*!
+ * \brief Smoother of _LayerEdge's on EDGE.
+ */
+ struct _Smoother1D
+ {
+ struct OffPnt // point of the offsetted EDGE
+ {
+ gp_XYZ _xyz; // coord of a point inflated from EDGE w/o smooth
+ double _len; // length reached at previous inflation step
+ double _param; // on EDGE
+ _2NearEdges _2edges; // 2 neighbor _LayerEdge's
+ gp_XYZ _edgeDir;// EDGE tangent at _param
+ double Distance( const OffPnt& p ) const { return ( _xyz - p._xyz ).Modulus(); }
+ };
+ vector< OffPnt > _offPoints;
+ vector< double > _leParams; // normalized param of _eos._edges on EDGE
+ Handle(Geom_Curve) _anaCurve; // for analytic smooth
+ _LayerEdge _leOnV[2]; // _LayerEdge's holding normal to the EDGE at VERTEXes
+ gp_XYZ _edgeDir[2]; // tangent at VERTEXes
+ size_t _iSeg[2]; // index of segment where extreme tgt node is projected
+ _EdgesOnShape& _eos;
+ double _curveLen; // length of the EDGE
+ std::pair<int,int> _eToSmooth[2]; // <from,to> indices of _LayerEdge's in _eos
+
+ static Handle(Geom_Curve) CurveForSmooth( const TopoDS_Edge& E,
+ _EdgesOnShape& eos,
+ SMESH_MesherHelper& helper);
+
+ _Smoother1D( Handle(Geom_Curve) curveForSmooth,
+ _EdgesOnShape& eos )
+ : _anaCurve( curveForSmooth ), _eos( eos )
+ {
+ }
+ bool Perform(_SolidData& data,
+ Handle(ShapeAnalysis_Surface)& surface,
+ const TopoDS_Face& F,
+ SMESH_MesherHelper& helper );
+
+ void prepare(_SolidData& data );
+
+ void findEdgesToSmooth();
+
+ bool isToSmooth( int iE );
+
+ bool smoothAnalyticEdge( _SolidData& data,
+ Handle(ShapeAnalysis_Surface)& surface,
+ const TopoDS_Face& F,
+ SMESH_MesherHelper& helper);
+ bool smoothComplexEdge( _SolidData& data,
+ Handle(ShapeAnalysis_Surface)& surface,
+ const TopoDS_Face& F,
+ SMESH_MesherHelper& helper);
+ gp_XYZ getNormalNormal( const gp_XYZ & normal,
+ const gp_XYZ& edgeDir);
+ _LayerEdge* getLEdgeOnV( bool is2nd )
+ {
+ return _eos._edges[ is2nd ? _eos._edges.size()-1 : 0 ]->_2neibors->_edges[ is2nd ];
+ }
+ bool isAnalytic() const { return !_anaCurve.IsNull(); }
+
+ void offPointsToPython() const; // debug
};
//--------------------------------------------------------------------------------
/*!
* \brief Class of temporary mesh face.
* We can't use SMDS_FaceOfNodes since it's impossible to set it's ID which is
- * needed because SMESH_ElementSearcher internaly uses set of elements sorted by ID
+ * needed because SMESH_ElementSearcher internally uses set of elements sorted by ID
*/
- struct _TmpMeshFace : public SMDS_MeshElement
- {
- vector<const SMDS_MeshNode* > _nn;
- _TmpMeshFace( const vector<const SMDS_MeshNode*>& nodes, int id, int faceID=-1):
- SMDS_MeshElement(id), _nn(nodes) { setShapeId(faceID); }
- virtual const SMDS_MeshNode* GetNode(const int ind) const { return _nn[ind]; }
- virtual SMDSAbs_ElementType GetType() const { return SMDSAbs_Face; }
- virtual vtkIdType GetVtkType() const { return -1; }
- virtual SMDSAbs_EntityType GetEntityType() const { return SMDSEntity_Last; }
- virtual SMDSAbs_GeometryType GetGeomType() const
- { return _nn.size() == 3 ? SMDSGeom_TRIANGLE : SMDSGeom_QUADRANGLE; }
- virtual SMDS_ElemIteratorPtr elementsIterator(SMDSAbs_ElementType) const
- { return SMDS_ElemIteratorPtr( new SMDS_NodeVectorElemIterator( _nn.begin(), _nn.end()));}
+ struct _TmpMeshFace : public SMDS_PolygonalFaceOfNodes
+ {
+ const SMDS_MeshElement* _srcFace;
+
+ _TmpMeshFace( const vector<const SMDS_MeshNode*>& nodes,
+ int ID,
+ int faceID=-1,
+ const SMDS_MeshElement* srcFace=0 ):
+ SMDS_PolygonalFaceOfNodes(nodes), _srcFace( srcFace ) { setID( ID ); setShapeID( faceID ); }
+ virtual SMDSAbs_EntityType GetEntityType() const
+ { return _srcFace ? _srcFace->GetEntityType() : SMDSEntity_Quadrangle; }
+ virtual SMDSAbs_GeometryType GetGeomType() const
+ { return _srcFace ? _srcFace->GetGeomType() : SMDSGeom_QUADRANGLE; }
};
//--------------------------------------------------------------------------------
/*!
- * \brief Class of temporary mesh face storing _LayerEdge it's based on
+ * \brief Class of temporary mesh quadrangle face storing _LayerEdge it's based on
*/
struct _TmpMeshFaceOnEdge : public _TmpMeshFace
{
_TmpMeshFaceOnEdge( _LayerEdge* le1, _LayerEdge* le2, int ID ):
_TmpMeshFace( vector<const SMDS_MeshNode*>(4), ID ), _le1(le1), _le2(le2)
{
- _nn[0]=_le1->_nodes[0];
- _nn[1]=_le1->_nodes.back();
- _nn[2]=_le2->_nodes.back();
- _nn[3]=_le2->_nodes[0];
+ myNodes[0]=_le1->_nodes[0];
+ myNodes[1]=_le1->_nodes.back();
+ myNodes[2]=_le2->_nodes.back();
+ myNodes[3]=_le2->_nodes[0];
+ }
+ const SMDS_MeshNode* n( size_t i ) const
+ {
+ return myNodes[ i ];
+ }
+ gp_XYZ GetDir() const // return average direction of _LayerEdge's, normal to EDGE
+ {
+ SMESH_TNodeXYZ p0s( myNodes[0] );
+ SMESH_TNodeXYZ p0t( myNodes[1] );
+ SMESH_TNodeXYZ p1t( myNodes[2] );
+ SMESH_TNodeXYZ p1s( myNodes[3] );
+ gp_XYZ v0 = p0t - p0s;
+ gp_XYZ v1 = p1t - p1s;
+ gp_XYZ v01 = p1s - p0s;
+ gp_XYZ n = ( v0 ^ v01 ) + ( v1 ^ v01 );
+ gp_XYZ d = v01 ^ n;
+ d.Normalize();
+ return d;
+ }
+ gp_XYZ GetDir(_LayerEdge* le1, _LayerEdge* le2) // return average direction of _LayerEdge's
+ {
+ myNodes[0]=le1->_nodes[0];
+ myNodes[1]=le1->_nodes.back();
+ myNodes[2]=le2->_nodes.back();
+ myNodes[3]=le2->_nodes[0];
+ return GetDir();
}
};
//--------------------------------------------------------------------------------
/*!
- * \brief Retriever of node coordinates either directly of from a surface by node UV.
+ * \brief Retriever of node coordinates either directly or from a surface by node UV.
* \warning Location of a surface is ignored
*/
struct _NodeCoordHelper
}
};
+ //================================================================================
+ /*!
+ * \brief Check angle between vectors
+ */
+ //================================================================================
+
+ inline bool isLessAngle( const gp_Vec& v1, const gp_Vec& v2, const double cos )
+ {
+ double dot = v1 * v2; // cos * |v1| * |v2|
+ double l1 = v1.SquareMagnitude();
+ double l2 = v2.SquareMagnitude();
+ return (( dot * cos >= 0 ) &&
+ ( dot * dot ) / l1 / l2 >= ( cos * cos ));
+ }
+
+ class _Factory
+ {
+ ObjectPool< _LayerEdge > _edgePool;
+ ObjectPool< _Curvature > _curvaturePool;
+ ObjectPool< _2NearEdges > _nearEdgesPool;
+
+ static _Factory* & me()
+ {
+ static _Factory* theFactory = 0;
+ return theFactory;
+ }
+ public:
+
+ _Factory() { me() = this; }
+ ~_Factory() { me() = 0; }
+
+ static _LayerEdge* NewLayerEdge() { return me()->_edgePool.getNew(); }
+ static _Curvature * NewCurvature() { return me()->_curvaturePool.getNew(); }
+ static _2NearEdges* NewNearEdges() { return me()->_nearEdgesPool.getNew(); }
+ };
+
} // namespace VISCOUS_3D
//================================================================================
// StdMeshers_ViscousLayers hypothesis
//
-StdMeshers_ViscousLayers::StdMeshers_ViscousLayers(int hypId, int studyId, SMESH_Gen* gen)
- :SMESH_Hypothesis(hypId, studyId, gen),
- _isToIgnoreShapes(1), _nbLayers(1), _thickness(1), _stretchFactor(1)
+StdMeshers_ViscousLayers::StdMeshers_ViscousLayers(int hypId, SMESH_Gen* gen)
+ :SMESH_Hypothesis(hypId, gen),
+ _isToIgnoreShapes(1), _nbLayers(1), _thickness(1), _stretchFactor(1),
+ _method( SURF_OFFSET_SMOOTH ),
+ _groupName("")
{
_name = StdMeshers_ViscousLayers::GetHypType();
_param_algo_dim = -3; // auxiliary hyp used by 3D algos
if ( _stretchFactor != factor )
_stretchFactor = factor, NotifySubMeshesHypothesisModification();
} // --------------------------------------------------------------------------------
+void StdMeshers_ViscousLayers::SetMethod( ExtrusionMethod method )
+{
+ if ( _method != method )
+ _method = method, NotifySubMeshesHypothesisModification();
+} // --------------------------------------------------------------------------------
+void StdMeshers_ViscousLayers::SetGroupName(const std::string& name)
+{
+ if ( _groupName != name )
+ {
+ _groupName = name;
+ if ( !_groupName.empty() )
+ NotifySubMeshesHypothesisModification();
+ }
+} // --------------------------------------------------------------------------------
SMESH_ProxyMesh::Ptr
StdMeshers_ViscousLayers::Compute(SMESH_Mesh& theMesh,
const TopoDS_Shape& theShape,
const bool toMakeN2NMap) const
{
using namespace VISCOUS_3D;
- _ViscousBuilder bulder;
- SMESH_ComputeErrorPtr err = bulder.Compute( theMesh, theShape );
+ _ViscousBuilder builder;
+ SMESH_ComputeErrorPtr err = builder.Compute( theMesh, theShape );
if ( err && !err->IsOK() )
return SMESH_ProxyMesh::Ptr();
_ViscousListener::GetSolidMesh( &theMesh, exp.Current(), /*toCreate=*/false))
{
if ( toMakeN2NMap && !pm->_n2nMapComputed )
- if ( !bulder.MakeN2NMap( pm ))
+ if ( !builder.MakeN2NMap( pm ))
return SMESH_ProxyMesh::Ptr();
components.push_back( SMESH_ProxyMesh::Ptr( pm ));
pm->myIsDeletable = false; // it will de deleted by boost::shared_ptr
for ( size_t i = 0; i < _shapeIds.size(); ++i )
save << " " << _shapeIds[i];
save << " " << !_isToIgnoreShapes; // negate to keep the behavior in old studies.
+ save << " " << _method;
+ save << " " << _groupName.size();
+ if ( !_groupName.empty() )
+ save << " " << _groupName;
return save;
} // --------------------------------------------------------------------------------
std::istream & StdMeshers_ViscousLayers::LoadFrom(std::istream & load)
{
- int nbFaces, faceID, shapeToTreat;
+ int nbFaces, faceID, shapeToTreat, method;
load >> _nbLayers >> _thickness >> _stretchFactor >> nbFaces;
- while ( _shapeIds.size() < nbFaces && load >> faceID )
+ while ( (int) _shapeIds.size() < nbFaces && load >> faceID )
_shapeIds.push_back( faceID );
- if ( load >> shapeToTreat )
+ if ( load >> shapeToTreat ) {
_isToIgnoreShapes = !shapeToTreat;
- else
+ if ( load >> method )
+ _method = (ExtrusionMethod) method;
+ int nameSize = 0;
+ if ( load >> nameSize && nameSize > 0 )
+ {
+ _groupName.resize( nameSize );
+ load.get( _groupName[0] ); // remove a white-space
+ load.getline( &_groupName[0], nameSize + 1 );
+ }
+ }
+ else {
_isToIgnoreShapes = true; // old behavior
+ }
return load;
} // --------------------------------------------------------------------------------
-bool StdMeshers_ViscousLayers::SetParametersByMesh(const SMESH_Mesh* theMesh,
- const TopoDS_Shape& theShape)
+bool StdMeshers_ViscousLayers::SetParametersByMesh(const SMESH_Mesh* /*theMesh*/,
+ const TopoDS_Shape& /*theShape*/)
{
// TODO
return false;
const TopoDS_Shape& theShape,
SMESH_Hypothesis::Hypothesis_Status& theStatus)
{
- VISCOUS_3D::_ViscousBuilder bulder;
- SMESH_ComputeErrorPtr err = bulder.CheckHypotheses( theMesh, theShape );
+ VISCOUS_3D::_ViscousBuilder builder;
+ SMESH_ComputeErrorPtr err = builder.CheckHypotheses( theMesh, theShape );
if ( err && !err->IsOK() )
theStatus = SMESH_Hypothesis::HYP_INCOMPAT_HYPS;
else
( std::find( _shapeIds.begin(), _shapeIds.end(), shapeIndex ) != _shapeIds.end() );
return IsToIgnoreShapes() ? !isIn : isIn;
}
+
+// --------------------------------------------------------------------------------
+SMDS_MeshGroup* StdMeshers_ViscousLayers::CreateGroup( const std::string& theName,
+ SMESH_Mesh& theMesh,
+ SMDSAbs_ElementType theType)
+{
+ SMESH_Group* group = 0;
+ SMDS_MeshGroup* groupDS = 0;
+
+ if ( theName.empty() )
+ return groupDS;
+
+ if ( SMESH_Mesh::GroupIteratorPtr grIt = theMesh.GetGroups() )
+ while( grIt->more() && !group )
+ {
+ group = grIt->next();
+ if ( !group ||
+ group->GetGroupDS()->GetType() != theType ||
+ group->GetName() != theName ||
+ !dynamic_cast< SMESHDS_Group* >( group->GetGroupDS() ))
+ group = 0;
+ }
+ if ( !group )
+ group = theMesh.AddGroup( theType, theName.c_str() );
+
+ groupDS = & dynamic_cast< SMESHDS_Group* >( group->GetGroupDS() )->SMDSGroup();
+
+ return groupDS;
+}
+
// END StdMeshers_ViscousLayers hypothesis
//================================================================================
gp_Vec dir;
double f,l;
Handle(Geom_Curve) c = BRep_Tool::Curve( E, f, l );
+ if ( c.IsNull() ) return gp_XYZ( Precision::Infinite(), 1e100, 1e100 );
gp_Pnt p = BRep_Tool::Pnt( fromV );
double distF = p.SquareDistance( c->Value( f ));
double distL = p.SquareDistance( c->Value( l ));
gp_Vec dir;
double f,l; gp_Pnt p;
Handle(Geom_Curve) c = BRep_Tool::Curve( E, f, l );
- if ( c.IsNull() ) return gp_XYZ( 1e100, 1e100, 1e100 );
+ if ( c.IsNull() ) return gp_XYZ( Precision::Infinite(), 1e100, 1e100 );
double u = helper.GetNodeU( E, atNode );
c->D1( u, p, dir );
return dir.XYZ();
{
TopoDS_Face faceFrw = F;
faceFrw.Orientation( TopAbs_FORWARD );
- double f,l; TopLoc_Location loc;
+ //double f,l; TopLoc_Location loc;
TopoDS_Edge edges[2]; // sharing a vertex
- int nbEdges = 0;
+ size_t nbEdges = 0;
{
TopoDS_Vertex VV[2];
TopExp_Explorer exp( faceFrw, TopAbs_EDGE );
double u1 = intervals( i );
double u2 = intervals( i+1 );
curve.D2( 0.5*( u1+u2 ), p, drv1, drv2 );
- double cross = drv2 ^ drv1;
+ double cross = drv1 ^ drv2;
if ( E.Orientation() == TopAbs_REVERSED )
cross = -cross;
- isConvex = ( cross > 0.1 ); //-1e-9 );
+ isConvex = ( cross > -1e-9 ); // 0.1 );
}
if ( !isConvex )
{
//================================================================================
/*!
- * \brief Computes mimimal distance of face in-FACE nodes from an EDGE
+ * \brief Computes minimal distance of face in-FACE nodes from an EDGE
* \param [in] face - the mesh face to treat
* \param [in] nodeOnEdge - a node on the EDGE
* \param [out] faceSize - the computed distance
// look for two neighbor not in-FACE nodes of face
for ( int i = 0; i < 2; ++i )
{
- if ( nNext[i]->GetPosition()->GetDim() != 2 &&
- nNext[i]->GetID() < nodeOnEdge->GetID() )
+ if (( nNext[i]->GetPosition()->GetDim() != 2 ) &&
+ ( nodeOnEdge->GetPosition()->GetDim() == 0 || nNext[i]->GetID() < nodeOnEdge->GetID() ))
{
// look for an in-FACE node
for ( int iN = 0; iN < nbN; ++iN )
// HOWTO use: run python commands written in a console to see
// construction steps of viscous layers
#ifdef __myDEBUG
- ofstream* py;
- int theNbPyFunc;
- struct PyDump {
+ ostream* py;
+ int theNbPyFunc;
+ struct PyDump
+ {
PyDump(SMESH_Mesh& m) {
int tag = 3 + m.GetId();
const char* fname = "/tmp/viscous.py";
- cout << "execfile('"<<fname<<"')"<<endl;
- py = new ofstream(fname);
+ cout << "exec(open('"<<fname<<"','rb').read() )"<<endl;
+ py = _pyStream = new ofstream(fname);
*py << "import SMESH" << endl
<< "from salome.smesh import smeshBuilder" << endl
- << "smesh = smeshBuilder.New(salome.myStudy)" << endl
- << "meshSO = smesh.GetCurrentStudy().FindObjectID('0:1:2:" << tag <<"')" << endl
+ << "smesh = smeshBuilder.New()" << endl
+ << "meshSO = salome.myStudy.FindObjectID('0:1:2:" << tag <<"')" << endl
<< "mesh = smesh.Mesh( meshSO.GetObject() )"<<endl;
theNbPyFunc = 0;
}
delete py; py=0;
}
~PyDump() { Finish(); cout << "NB FUNCTIONS: " << theNbPyFunc << endl; }
+ struct MyStream : public ostream
+ {
+ template <class T> ostream & operator<<( const T &anything ) { return *this ; }
+ };
+ void Pause() { py = &_mystream; }
+ void Resume() { py = _pyStream; }
+ MyStream _mystream;
+ ostream* _pyStream;
};
#define dumpFunction(f) { _dumpFunction(f, __LINE__);}
#define dumpMove(n) { _dumpMove(n, __LINE__);}
{ if (py) { *py<< " mesh.ChangeElemNodes( " << f->GetID()<<", [";
for ( int i=1; i < f->NbNodes(); ++i ) *py << f->GetNode(i-1)->GetID()<<", ";
*py << f->GetNode( f->NbNodes()-1 )->GetID() << " ])"<< endl; }}
-#define debugMsg( txt ) { cout << txt << " (line: " << __LINE__ << ")" << endl; }
+#define debugMsg( txt ) { cout << "# "<< txt << " (line: " << __LINE__ << ")" << endl; }
+
#else
- struct PyDump { PyDump(SMESH_Mesh&) {} void Finish() {} };
+
+ struct PyDump { PyDump(SMESH_Mesh&) {} void Finish() {} void Pause() {} void Resume() {} };
#define dumpFunction(f) f
#define dumpMove(n)
#define dumpMoveComm(n,txt)
#define dumpCmd(txt)
#define dumpFunctionEnd()
-#define dumpChangeNodes(f)
+#define dumpChangeNodes(f) { if(f) {} } // prevent "unused variable 'f'" warning
#define debugMsg( txt ) {}
+
#endif
}
SMESH_ComputeErrorPtr _ViscousBuilder::Compute(SMESH_Mesh& theMesh,
const TopoDS_Shape& theShape)
{
- // TODO: set priority of solids during Gen::Compute()
-
_mesh = & theMesh;
+ _Factory factory;
+
// check if proxy mesh already computed
TopExp_Explorer exp( theShape, TopAbs_SOLID );
if ( !exp.More() )
return SMESH_ComputeErrorPtr(); // everything already computed
PyDump debugDump( theMesh );
+ _pyDump = &debugDump;
- // TODO: ignore already computed SOLIDs
+ // TODO: ignore already computed SOLIDs
if ( !findSolidsWithLayers())
return _error;
if ( !findFacesWithLayers() )
return _error;
+ // for ( size_t i = 0; i < _sdVec.size(); ++i )
+ // {
+ // if ( ! makeLayer( _sdVec[ i ])) // create _LayerEdge's
+ // return _error;
+ // }
+
+ makeEdgesOnShape();
+
+ findPeriodicFaces();
+
for ( size_t i = 0; i < _sdVec.size(); ++i )
{
- if ( ! makeLayer(_sdVec[i]) )
+ size_t iSD = 0;
+ for ( iSD = 0; iSD < _sdVec.size(); ++iSD ) // find next SOLID to compute
+ if ( _sdVec[iSD]._before.IsEmpty() &&
+ !_sdVec[iSD]._solid.IsNull() &&
+ !_sdVec[iSD]._done )
+ break;
+
+ if ( ! makeLayer(_sdVec[iSD]) ) // create _LayerEdge's
return _error;
- if ( _sdVec[i]._edges.size() == 0 )
+ if ( _sdVec[iSD]._n2eMap.size() == 0 ) // no layers in a SOLID
+ {
+ _sdVec[iSD]._solid.Nullify();
continue;
-
- if ( ! inflate(_sdVec[i]) )
+ }
+
+ if ( ! inflate(_sdVec[iSD]) ) // increase length of _LayerEdge's
return _error;
- if ( ! refine(_sdVec[i]) )
+ if ( ! refine(_sdVec[iSD]) ) // create nodes and prisms
return _error;
- }
- if ( !shrink() )
- return _error;
- addBoundaryElements();
+ if ( ! shrink(_sdVec[iSD]) ) // shrink 2D mesh on FACEs w/o layer
+ return _error;
+
+ addBoundaryElements(_sdVec[iSD]); // create quadrangles on prism bare sides
+
+ _sdVec[iSD]._done = true;
+
+ const TopoDS_Shape& solid = _sdVec[iSD]._solid;
+ for ( iSD = 0; iSD < _sdVec.size(); ++iSD )
+ _sdVec[iSD]._before.Remove( solid );
+ }
makeGroupOfLE(); // debug
debugDump.Finish();
return SMESH_ComputeErrorPtr(); // everything already computed
- findSolidsWithLayers();
- bool ok = findFacesWithLayers();
+ findSolidsWithLayers( /*checkFaceMesh=*/false );
+ bool ok = findFacesWithLayers( true );
// remove _MeshOfSolid's of _SolidData's
for ( size_t i = 0; i < _sdVec.size(); ++i )
*/
//================================================================================
-bool _ViscousBuilder::findSolidsWithLayers()
+bool _ViscousBuilder::findSolidsWithLayers(const bool checkFaceMesh)
{
// get all solids
TopTools_IndexedMapOfShape allSolids;
TopExp::MapShapes( _mesh->GetShapeToMesh(), TopAbs_SOLID, allSolids );
_sdVec.reserve( allSolids.Extent());
- SMESH_Gen* gen = _mesh->GetGen();
SMESH_HypoFilter filter;
for ( int i = 1; i <= allSolids.Extent(); ++i )
{
- // find StdMeshers_ViscousLayers hyp assigned to the i-th solid
- SMESH_Algo* algo = gen->GetAlgo( *_mesh, allSolids(i) );
- if ( !algo ) continue;
+ SMESH_subMesh* sm = _mesh->GetSubMesh( allSolids(i) );
+ if ( sm->GetSubMeshDS() && sm->GetSubMeshDS()->NbElements() > 0 )
+ continue; // solid is already meshed
// TODO: check if algo is hidden
+ SMESH_Algo* algo = sm->GetAlgo();
+ if ( !algo ) continue;
+ // check if all FACEs are meshed, which can be false if Compute() a sub-shape
+ if ( checkFaceMesh )
+ {
+ bool facesMeshed = true;
+ SMESH_subMeshIteratorPtr smIt = sm->getDependsOnIterator(false,true);
+ while ( smIt->more() && facesMeshed )
+ {
+ SMESH_subMesh * faceSM = smIt->next();
+ if ( faceSM->GetSubShape().ShapeType() != TopAbs_FACE )
+ break;
+ facesMeshed = faceSM->IsMeshComputed();
+ }
+ if ( !facesMeshed )
+ continue;
+ }
+ // find StdMeshers_ViscousLayers hyp assigned to the i-th solid
const list <const SMESHDS_Hypothesis *> & allHyps =
algo->GetUsedHypothesis(*_mesh, allSolids(i), /*ignoreAuxiliary=*/false);
_SolidData* soData = 0;
list< const SMESHDS_Hypothesis *>::const_iterator hyp = allHyps.begin();
const StdMeshers_ViscousLayers* viscHyp = 0;
for ( ; hyp != allHyps.end(); ++hyp )
- if ( viscHyp = dynamic_cast<const StdMeshers_ViscousLayers*>( *hyp ))
+ if (( viscHyp = dynamic_cast<const StdMeshers_ViscousLayers*>( *hyp )))
{
TopoDS_Shape hypShape;
filter.Init( filter.Is( viscHyp ));
_sdVec.push_back( _SolidData( allSolids(i), proxyMesh ));
soData = & _sdVec.back();
soData->_index = getMeshDS()->ShapeToIndex( allSolids(i));
+ soData->_helper = new SMESH_MesherHelper( *_mesh );
+ soData->_helper->SetSubShape( allSolids(i) );
+ _solids.Add( allSolids(i) );
}
soData->_hyps.push_back( viscHyp );
soData->_hypShapes.push_back( hypShape );
//================================================================================
/*!
- * \brief
+ * \brief Set a _SolidData to be computed before another
+ */
+//================================================================================
+
+bool _ViscousBuilder::setBefore( _SolidData& solidBefore, _SolidData& solidAfter )
+{
+ // check possibility to set this order; get all solids before solidBefore
+ TopTools_IndexedMapOfShape allSolidsBefore;
+ allSolidsBefore.Add( solidBefore._solid );
+ for ( int i = 1; i <= allSolidsBefore.Extent(); ++i )
+ {
+ int iSD = _solids.FindIndex( allSolidsBefore(i) );
+ if ( iSD )
+ {
+ TopTools_MapIteratorOfMapOfShape soIt( _sdVec[ iSD-1 ]._before );
+ for ( ; soIt.More(); soIt.Next() )
+ allSolidsBefore.Add( soIt.Value() );
+ }
+ }
+ if ( allSolidsBefore.Contains( solidAfter._solid ))
+ return false;
+
+ for ( int i = 1; i <= allSolidsBefore.Extent(); ++i )
+ solidAfter._before.Add( allSolidsBefore(i) );
+
+ return true;
+}
+
+//================================================================================
+/*!
+ * \brief
*/
//================================================================================
{
SMESH_MesherHelper helper( *_mesh );
TopExp_Explorer exp;
- TopTools_IndexedMapOfShape solids;
- // collect all faces to ignore defined by hyp
+ // collect all faces-to-ignore defined by hyp
for ( size_t i = 0; i < _sdVec.size(); ++i )
{
- solids.Add( _sdVec[i]._solid );
-
- // get faces to ignore defined by each hyp
+ // get faces-to-ignore defined by each hyp
typedef const StdMeshers_ViscousLayers* THyp;
typedef std::pair< set<TGeomID>, THyp > TFacesOfHyp;
list< TFacesOfHyp > ignoreFacesOfHyps;
for ( ; exp.More(); exp.Next() )
{
const TopoDS_Face& face = TopoDS::Face( exp.Current() );
- const TGeomID faceID = getMeshDS()->ShapeToIndex( face );
+ const TGeomID faceID = getMeshDS()->ShapeToIndex( face );
if ( //!sdVec[i]._ignoreFaceIds.count( faceID ) &&
helper.NbAncestors( face, *_mesh, TopAbs_SOLID ) > 1 &&
helper.IsReversedSubMesh( face ))
}
}
- // Find faces to shrink mesh on (solution 2 in issue 0020832);
+ // Find FACEs to shrink mesh on (solution 2 in issue 0020832): fill in _shrinkShape2Shape
TopTools_IndexedMapOfShape shapes;
+ std::string structAlgoName = "Hexa_3D";
for ( size_t i = 0; i < _sdVec.size(); ++i )
{
shapes.Clear();
for ( int iE = 1; iE <= shapes.Extent(); ++iE )
{
const TopoDS_Shape& edge = shapes(iE);
- // find 2 faces sharing an edge
+ // find 2 FACEs sharing an EDGE
TopoDS_Shape FF[2];
- PShapeIteratorPtr fIt = helper.GetAncestors(edge, *_mesh, TopAbs_FACE);
+ PShapeIteratorPtr fIt = helper.GetAncestors(edge, *_mesh, TopAbs_FACE, &_sdVec[i]._solid);
while ( fIt->more())
{
const TopoDS_Shape* f = fIt->next();
- if ( helper.IsSubShape( *f, _sdVec[i]._solid))
- FF[ int( !FF[0].IsNull()) ] = *f;
+ FF[ int( !FF[0].IsNull()) ] = *f;
}
if( FF[1].IsNull() ) continue; // seam edge can be shared by 1 FACE only
+
// check presence of layers on them
int ignore[2];
for ( int j = 0; j < 2; ++j )
- ignore[j] = _sdVec[i]._ignoreFaceIds.count ( getMeshDS()->ShapeToIndex( FF[j] ));
+ ignore[j] = _sdVec[i]._ignoreFaceIds.count( getMeshDS()->ShapeToIndex( FF[j] ));
if ( ignore[0] == ignore[1] )
continue; // nothing interesting
- TopoDS_Shape fWOL = FF[ ignore[0] ? 0 : 1 ];
- // check presence of layers on fWOL within an adjacent SOLID
- bool collision = false;
- PShapeIteratorPtr sIt = helper.GetAncestors( fWOL, *_mesh, TopAbs_SOLID );
- while ( const TopoDS_Shape* solid = sIt->next() )
- if ( !solid->IsSame( _sdVec[i]._solid ))
- {
- int iSolid = solids.FindIndex( *solid );
- int iFace = getMeshDS()->ShapeToIndex( fWOL );
- if ( iSolid > 0 && !_sdVec[ iSolid-1 ]._ignoreFaceIds.count( iFace ))
- {
- //_sdVec[i]._noShrinkShapes.insert( iFace );
- //fWOL.Nullify();
- collision = true;
- }
- }
- // add edge to maps
+ TopoDS_Shape fWOL = FF[ ignore[0] ? 0 : 1 ]; // FACE w/o layers
+
+ // add EDGE to maps
if ( !fWOL.IsNull())
{
TGeomID edgeInd = getMeshDS()->ShapeToIndex( edge );
_sdVec[i]._shrinkShape2Shape.insert( make_pair( edgeInd, fWOL ));
- if ( collision )
- {
- // _shrinkShape2Shape will be used to temporary inflate _LayerEdge's based
- // on the edge but shrink won't be performed
- _sdVec[i]._noShrinkShapes.insert( edgeInd );
- }
}
}
}
- // Exclude from _shrinkShape2Shape FACE's that can't be shrinked since
- // the algo of the SOLID sharing the FACE does not support it
- set< string > notSupportAlgos; notSupportAlgos.insert("Hexa_3D");
- for ( size_t i = 0; i < _sdVec.size(); ++i )
- {
- map< TGeomID, TopoDS_Shape >::iterator e2f = _sdVec[i]._shrinkShape2Shape.begin();
- for ( ; e2f != _sdVec[i]._shrinkShape2Shape.end(); ++e2f )
- {
- const TopoDS_Shape& fWOL = e2f->second;
- const TGeomID edgeID = e2f->first;
- bool notShrinkFace = false;
- PShapeIteratorPtr soIt = helper.GetAncestors(fWOL, *_mesh, TopAbs_SOLID);
- while ( soIt->more() )
- {
- const TopoDS_Shape* solid = soIt->next();
- if ( _sdVec[i]._solid.IsSame( *solid )) continue;
- SMESH_Algo* algo = _mesh->GetGen()->GetAlgo( *_mesh, *solid );
- if ( !algo || !notSupportAlgos.count( algo->GetName() )) continue;
- notShrinkFace = true;
- size_t iSolid = 0;
- for ( ; iSolid < _sdVec.size(); ++iSolid )
- {
- if ( _sdVec[iSolid]._solid.IsSame( *solid ) ) {
- if ( _sdVec[iSolid]._shrinkShape2Shape.count( edgeID ))
- notShrinkFace = false;
- break;
- }
- }
- if ( notShrinkFace )
- {
- _sdVec[i]._noShrinkShapes.insert( edgeID );
-
- // add VERTEXes of the edge in _noShrinkShapes
- TopoDS_Shape edge = getMeshDS()->IndexToShape( edgeID );
- for ( TopoDS_Iterator vIt( edge ); vIt.More(); vIt.Next() )
- _sdVec[i]._noShrinkShapes.insert( getMeshDS()->ShapeToIndex( vIt.Value() ));
-
- // check if there is a collision with to-shrink-from EDGEs in iSolid
- if ( iSolid == _sdVec.size() )
- continue; // no VL in the solid
- shapes.Clear();
- TopExp::MapShapes( fWOL, TopAbs_EDGE, shapes);
- for ( int iE = 1; iE <= shapes.Extent(); ++iE )
- {
- const TopoDS_Edge& E = TopoDS::Edge( shapes( iE ));
- const TGeomID eID = getMeshDS()->ShapeToIndex( E );
- if ( eID == edgeID ||
- !_sdVec[iSolid]._shrinkShape2Shape.count( eID ) ||
- _sdVec[i]._noShrinkShapes.count( eID ))
- continue;
- for ( int is1st = 0; is1st < 2; ++is1st )
- {
- TopoDS_Vertex V = helper.IthVertex( is1st, E );
- if ( _sdVec[i]._noShrinkShapes.count( getMeshDS()->ShapeToIndex( V ) ))
- {
- // _sdVec[i]._noShrinkShapes.insert( eID );
- // V = helper.IthVertex( !is1st, E );
- // _sdVec[i]._noShrinkShapes.insert( getMeshDS()->ShapeToIndex( V ));
- //iE = 0; // re-start the loop on EDGEs of fWOL
- return error("No way to make a conformal mesh with "
- "the given set of faces with layers", _sdVec[i]._index);
- }
- }
- }
- }
-
- } // while ( soIt->more() )
- } // loop on _sdVec[i]._shrinkShape2Shape
- } // loop on _sdVec to fill in _SolidData::_noShrinkShapes
// Find the SHAPE along which to inflate _LayerEdge based on VERTEX
const TopoDS_Shape& vertex = shapes(iV);
// find faces WOL sharing the vertex
vector< TopoDS_Shape > facesWOL;
- int totalNbFaces = 0;
- PShapeIteratorPtr fIt = helper.GetAncestors(vertex, *_mesh, TopAbs_FACE);
+ size_t totalNbFaces = 0;
+ PShapeIteratorPtr fIt = helper.GetAncestors(vertex, *_mesh, TopAbs_FACE, &_sdVec[i]._solid );
while ( fIt->more())
{
const TopoDS_Shape* f = fIt->next();
- if ( helper.IsSubShape( *f, _sdVec[i]._solid ) )
- {
- totalNbFaces++;
- const int fID = getMeshDS()->ShapeToIndex( *f );
- if ( _sdVec[i]._ignoreFaceIds.count ( fID ) /*&&
- !_sdVec[i]._noShrinkShapes.count( fID )*/)
- facesWOL.push_back( *f );
- }
+ totalNbFaces++;
+ const int fID = getMeshDS()->ShapeToIndex( *f );
+ if ( _sdVec[i]._ignoreFaceIds.count ( fID ) /*&& !_sdVec[i]._noShrinkShapes.count( fID )*/)
+ facesWOL.push_back( *f );
}
if ( facesWOL.size() == totalNbFaces || facesWOL.empty() )
continue; // no layers at this vertex or no WOL
}
}
- // add FACEs of other SOLIDs to _ignoreFaceIds
+ // Add to _noShrinkShapes sub-shapes of FACE's that can't be shrunk since
+ // the algo of the SOLID sharing the FACE does not support it or for other reasons
+ set< string > notSupportAlgos; notSupportAlgos.insert( structAlgoName );
for ( size_t i = 0; i < _sdVec.size(); ++i )
{
- shapes.Clear();
- TopExp::MapShapes(_sdVec[i]._solid, TopAbs_FACE, shapes);
-
- for ( exp.Init( _mesh->GetShapeToMesh(), TopAbs_FACE ); exp.More(); exp.Next() )
+ map< TGeomID, TopoDS_Shape >::iterator e2f = _sdVec[i]._shrinkShape2Shape.begin();
+ for ( ; e2f != _sdVec[i]._shrinkShape2Shape.end(); ++e2f )
{
- if ( !shapes.Contains( exp.Current() ))
- _sdVec[i]._ignoreFaceIds.insert( getMeshDS()->ShapeToIndex( exp.Current() ));
- }
- }
-
- return true;
-}
+ const TopoDS_Shape& fWOL = e2f->second;
+ const TGeomID edgeID = e2f->first;
+ TGeomID faceID = getMeshDS()->ShapeToIndex( fWOL );
+ TopoDS_Shape edge = getMeshDS()->IndexToShape( edgeID );
+ if ( edge.ShapeType() != TopAbs_EDGE )
+ continue; // shrink shape is VERTEX
+
+ TopoDS_Shape solid;
+ PShapeIteratorPtr soIt = helper.GetAncestors(fWOL, *_mesh, TopAbs_SOLID);
+ while ( soIt->more() && solid.IsNull() )
+ {
+ const TopoDS_Shape* so = soIt->next();
+ if ( !so->IsSame( _sdVec[i]._solid ))
+ solid = *so;
+ }
+ if ( solid.IsNull() )
+ continue;
+
+ bool noShrinkE = false;
+ SMESH_Algo* algo = _mesh->GetSubMesh( solid )->GetAlgo();
+ bool isStructured = ( algo && algo->GetName() == structAlgoName );
+ size_t iSolid = _solids.FindIndex( solid ) - 1;
+ if ( iSolid < _sdVec.size() && _sdVec[ iSolid ]._ignoreFaceIds.count( faceID ))
+ {
+ // the adjacent SOLID has NO layers on fWOL;
+ // shrink allowed if
+ // - there are layers on the EDGE in the adjacent SOLID
+ // - there are NO layers in the adjacent SOLID && algo is unstructured and computed later
+ bool hasWLAdj = (_sdVec[iSolid]._shrinkShape2Shape.count( edgeID ));
+ bool shrinkAllowed = (( hasWLAdj ) ||
+ ( !isStructured && setBefore( _sdVec[ i ], _sdVec[ iSolid ] )));
+ noShrinkE = !shrinkAllowed;
+ }
+ else if ( iSolid < _sdVec.size() )
+ {
+ // the adjacent SOLID has layers on fWOL;
+ // check if SOLID's mesh is unstructured and then try to set it
+ // to be computed after the i-th solid
+ if ( isStructured || !setBefore( _sdVec[ i ], _sdVec[ iSolid ] ))
+ noShrinkE = true; // don't shrink fWOL
+ }
+ else
+ {
+ // the adjacent SOLID has NO layers at all
+ noShrinkE = isStructured;
+ }
+
+ if ( noShrinkE )
+ {
+ _sdVec[i]._noShrinkShapes.insert( edgeID );
+
+ // check if there is a collision with to-shrink-from EDGEs in iSolid
+ // if ( iSolid < _sdVec.size() )
+ // {
+ // shapes.Clear();
+ // TopExp::MapShapes( fWOL, TopAbs_EDGE, shapes);
+ // for ( int iE = 1; iE <= shapes.Extent(); ++iE )
+ // {
+ // const TopoDS_Edge& E = TopoDS::Edge( shapes( iE ));
+ // const TGeomID eID = getMeshDS()->ShapeToIndex( E );
+ // if ( eID == edgeID ||
+ // !_sdVec[iSolid]._shrinkShape2Shape.count( eID ) ||
+ // _sdVec[i]._noShrinkShapes.count( eID ))
+ // continue;
+ // for ( int is1st = 0; is1st < 2; ++is1st )
+ // {
+ // TopoDS_Vertex V = helper.IthVertex( is1st, E );
+ // if ( _sdVec[i]._noShrinkShapes.count( getMeshDS()->ShapeToIndex( V ) ))
+ // {
+ // return error("No way to make a conformal mesh with "
+ // "the given set of faces with layers", _sdVec[i]._index);
+ // }
+ // }
+ // }
+ // }
+ }
+
+ // add VERTEXes of the edge in _noShrinkShapes, which is necessary if
+ // _shrinkShape2Shape is different in the adjacent SOLID
+ for ( TopoDS_Iterator vIt( edge ); vIt.More(); vIt.Next() )
+ {
+ TGeomID vID = getMeshDS()->ShapeToIndex( vIt.Value() );
+ bool noShrinkV = false, noShrinkIfAdjMeshed = false;
+
+ if ( iSolid < _sdVec.size() )
+ {
+ if ( _sdVec[ iSolid ]._ignoreFaceIds.count( faceID ))
+ {
+ map< TGeomID, TopoDS_Shape >::iterator i2S, i2SAdj;
+ i2S = _sdVec[i ]._shrinkShape2Shape.find( vID );
+ i2SAdj = _sdVec[iSolid]._shrinkShape2Shape.find( vID );
+ if ( i2SAdj == _sdVec[iSolid]._shrinkShape2Shape.end() )
+ noShrinkV = (( isStructured ) ||
+ ( noShrinkIfAdjMeshed = i2S->second.ShapeType() == TopAbs_EDGE ));
+ else
+ noShrinkV = ( ! i2S->second.IsSame( i2SAdj->second ));
+ }
+ else
+ {
+ noShrinkV = noShrinkE;
+ }
+ }
+ else
+ {
+ // the adjacent SOLID has NO layers at all
+ if ( isStructured )
+ {
+ noShrinkV = true;
+ }
+ else
+ {
+ noShrinkV = noShrinkIfAdjMeshed =
+ ( _sdVec[i]._shrinkShape2Shape[ vID ].ShapeType() == TopAbs_EDGE );
+ }
+ }
+
+ if ( noShrinkV && noShrinkIfAdjMeshed )
+ {
+ // noShrinkV if FACEs in the adjacent SOLID are meshed
+ PShapeIteratorPtr fIt = helper.GetAncestors( _sdVec[i]._shrinkShape2Shape[ vID ],
+ *_mesh, TopAbs_FACE, &solid );
+ while ( fIt->more() )
+ {
+ const TopoDS_Shape* f = fIt->next();
+ if ( !f->IsSame( fWOL ))
+ {
+ noShrinkV = ! _mesh->GetSubMesh( *f )->IsEmpty();
+ break;
+ }
+ }
+ }
+ if ( noShrinkV )
+ _sdVec[i]._noShrinkShapes.insert( vID );
+ }
+
+ } // loop on _sdVec[i]._shrinkShape2Shape
+ } // loop on _sdVec to fill in _SolidData::_noShrinkShapes
+
+
+ // add FACEs of other SOLIDs to _ignoreFaceIds
+ for ( size_t i = 0; i < _sdVec.size(); ++i )
+ {
+ shapes.Clear();
+ TopExp::MapShapes(_sdVec[i]._solid, TopAbs_FACE, shapes);
+
+ for ( exp.Init( _mesh->GetShapeToMesh(), TopAbs_FACE ); exp.More(); exp.Next() )
+ {
+ if ( !shapes.Contains( exp.Current() ))
+ _sdVec[i]._ignoreFaceIds.insert( getMeshDS()->ShapeToIndex( exp.Current() ));
+ }
+ }
+
+ return true;
+}
//================================================================================
/*!
bool _ViscousBuilder::makeLayer(_SolidData& data)
{
- // get all sub-shapes to make layers on
- set<TGeomID> subIds, faceIds;
- subIds = data._noShrinkShapes;
- TopExp_Explorer exp( data._solid, TopAbs_FACE );
- for ( ; exp.More(); exp.Next() )
- {
- SMESH_subMesh* fSubM = _mesh->GetSubMesh( exp.Current() );
- if ( ! data._ignoreFaceIds.count( fSubM->GetId() ))
- {
- faceIds.insert( fSubM->GetId() );
- SMESH_subMeshIteratorPtr subIt = fSubM->getDependsOnIterator(/*includeSelf=*/true);
- while ( subIt->more() )
- subIds.insert( subIt->next()->GetId() );
- }
- }
-
// make a map to find new nodes on sub-shapes shared with other SOLID
map< TGeomID, TNode2Edge* >::iterator s2ne;
map< TGeomID, TopoDS_Shape >::iterator s2s = data._shrinkShape2Shape.begin();
// Create temporary faces and _LayerEdge's
- dumpFunction(SMESH_Comment("makeLayers_")<<data._index);
+ dumpFunction(SMESH_Comment("makeLayers_")<<data._index);
+
+ vector< _EdgesOnShape >& edgesByGeom = data._edgesOnShape;
data._stepSize = Precision::Infinite();
data._stepSizeNodes[0] = 0;
vector< const SMDS_MeshNode*> newNodes; // of a mesh face
TNode2Edge::iterator n2e2;
- // collect _LayerEdge's of shapes they are based on
- const int nbShapes = getMeshDS()->MaxShapeIndex();
- vector< vector<_LayerEdge*> > edgesByGeom( nbShapes+1 );
-
- for ( set<TGeomID>::iterator id = faceIds.begin(); id != faceIds.end(); ++id )
+ // make _LayerEdge's
+ for ( TopExp_Explorer exp( data._solid, TopAbs_FACE ); exp.More(); exp.Next() )
{
- SMESHDS_SubMesh* smDS = getMeshDS()->MeshElements( *id );
- if ( !smDS ) return error(SMESH_Comment("Not meshed face ") << *id, data._index );
-
- const TopoDS_Face& F = TopoDS::Face( getMeshDS()->IndexToShape( *id ));
+ const TopoDS_Face& F = TopoDS::Face( exp.Current() );
+ SMESH_subMesh* sm = _mesh->GetSubMesh( F );
+ const TGeomID id = sm->GetId();
+ if ( edgesByGeom[ id ]._shape.IsNull() )
+ continue; // no layers
SMESH_ProxyMesh::SubMesh* proxySub =
data._proxyMesh->getFaceSubM( F, /*create=*/true);
+ SMESHDS_SubMesh* smDS = sm->GetSubMeshDS();
+ if ( !smDS ) return error(SMESH_Comment("Not meshed face ") << id, data._index );
+
SMDS_ElemIteratorPtr eIt = smDS->GetElements();
while ( eIt->more() )
{
if ( !(*n2e).second )
{
// add a _LayerEdge
- _LayerEdge* edge = new _LayerEdge();
+ _LayerEdge* edge = _Factory::NewLayerEdge();
edge->_nodes.push_back( n );
n2e->second = edge;
- edgesByGeom[ shapeID ].push_back( edge );
+ edgesByGeom[ shapeID ]._edges.push_back( edge );
const bool noShrink = data._noShrinkShapes.count( shapeID );
SMESH_TNodeXYZ xyz( n );
(( n2e2 = (*s2ne).second->find( n )) != s2ne->second->end() ))
{
_LayerEdge* foundEdge = (*n2e2).second;
- gp_XYZ lastPos = edge->Copy( *foundEdge, helper );
+ gp_XYZ lastPos = edge->Copy( *foundEdge, edgesByGeom[ shapeID ], helper );
foundEdge->_pos.push_back( lastPos );
// location of the last node is modified and we restore it by foundEdge->_pos.back()
const_cast< SMDS_MeshNode* >
{
edge->_nodes.push_back( helper.AddNode( xyz.X(), xyz.Y(), xyz.Z() ));
}
- if ( !setEdgeData( *edge, subIds, helper, data ))
+ if ( !setEdgeData( *edge, edgesByGeom[ shapeID ], helper, data ))
return false;
+
+ if ( edge->_nodes.size() < 2 )
+ edge->Block( data );
+ //data._noShrinkShapes.insert( shapeID );
}
dumpMove(edge->_nodes.back());
// create a temporary face
const SMDS_MeshElement* newFace =
- new _TmpMeshFace( newNodes, --_tmpFaceID, face->getshapeId() );
+ new _TmpMeshFace( newNodes, --_tmpFaceID, face->GetShapeID(), face );
proxySub->AddElement( newFace );
// compute inflation step size by min size of element on a convex surface
limitStepSize( data, face, maxCosinEdge );
} // loop on 2D elements on a FACE
- } // loop on FACEs of a SOLID
+ } // loop on FACEs of a SOLID to create _LayerEdge's
+
+
+ // Set _LayerEdge::_neibors
+ TNode2Edge::iterator n2e;
+ for ( size_t iS = 0; iS < data._edgesOnShape.size(); ++iS )
+ {
+ _EdgesOnShape& eos = data._edgesOnShape[iS];
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ {
+ _LayerEdge* edge = eos._edges[i];
+ TIDSortedNodeSet nearNodes;
+ SMDS_ElemIteratorPtr fIt = edge->_nodes[0]->GetInverseElementIterator(SMDSAbs_Face);
+ while ( fIt->more() )
+ {
+ const SMDS_MeshElement* f = fIt->next();
+ if ( !data._ignoreFaceIds.count( f->getshapeId() ))
+ nearNodes.insert( f->begin_nodes(), f->end_nodes() );
+ }
+ nearNodes.erase( edge->_nodes[0] );
+ edge->_neibors.reserve( nearNodes.size() );
+ TIDSortedNodeSet::iterator node = nearNodes.begin();
+ for ( ; node != nearNodes.end(); ++node )
+ if (( n2e = data._n2eMap.find( *node )) != data._n2eMap.end() )
+ edge->_neibors.push_back( n2e->second );
+ }
+ }
data._epsilon = 1e-7;
if ( data._stepSize < 1. )
data._epsilon *= data._stepSize;
- // Put _LayerEdge's into the vector data._edges
- if ( !sortEdges( data, edgesByGeom ))
+ if ( !findShapesToSmooth( data )) // _LayerEdge::_maxLen is computed here
return false;
// limit data._stepSize depending on surface curvature and fill data._convexFaces
limitStepSizeByCurvature( data ); // !!! it must be before node substitution in _Simplex
// Set target nodes into _Simplex and _LayerEdge's to _2NearEdges
- TNode2Edge::iterator n2e;
const SMDS_MeshNode* nn[2];
- for ( size_t i = 0; i < data._edges.size(); ++i )
+ for ( size_t iS = 0; iS < data._edgesOnShape.size(); ++iS )
{
- _LayerEdge* edge = data._edges[i];
- if ( edge->IsOnEdge() )
+ _EdgesOnShape& eos = data._edgesOnShape[iS];
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
{
- // get neighbor nodes
- bool hasData = ( edge->_2neibors->_edges[0] );
- if ( hasData ) // _LayerEdge is a copy of another one
+ _LayerEdge* edge = eos._edges[i];
+ if ( edge->IsOnEdge() )
{
- nn[0] = edge->_2neibors->srcNode(0);
- nn[1] = edge->_2neibors->srcNode(1);
+ // get neighbor nodes
+ bool hasData = ( edge->_2neibors->_edges[0] );
+ if ( hasData ) // _LayerEdge is a copy of another one
+ {
+ nn[0] = edge->_2neibors->srcNode(0);
+ nn[1] = edge->_2neibors->srcNode(1);
+ }
+ else if ( !findNeiborsOnEdge( edge, nn[0],nn[1], eos, data ))
+ {
+ return false;
+ }
+ // set neighbor _LayerEdge's
+ for ( int j = 0; j < 2; ++j )
+ {
+ if (( n2e = data._n2eMap.find( nn[j] )) == data._n2eMap.end() )
+ return error("_LayerEdge not found by src node", data._index);
+ edge->_2neibors->_edges[j] = n2e->second;
+ }
+ if ( !hasData )
+ edge->SetDataByNeighbors( nn[0], nn[1], eos, helper );
}
- else if ( !findNeiborsOnEdge( edge, nn[0],nn[1], data ))
+
+ for ( size_t j = 0; j < edge->_simplices.size(); ++j )
{
- return false;
+ _Simplex& s = edge->_simplices[j];
+ s._nNext = data._n2eMap[ s._nNext ]->_nodes.back();
+ s._nPrev = data._n2eMap[ s._nPrev ]->_nodes.back();
}
- // set neighbor _LayerEdge's
- for ( int j = 0; j < 2; ++j )
+
+ // For an _LayerEdge on a degenerated EDGE, copy some data from
+ // a corresponding _LayerEdge on a VERTEX
+ // (issue 52453, pb on a downloaded SampleCase2-Tet-netgen-mephisto.hdf)
+ if ( helper.IsDegenShape( edge->_nodes[0]->getshapeId() ))
{
- if (( n2e = data._n2eMap.find( nn[j] )) == data._n2eMap.end() )
- return error("_LayerEdge not found by src node", data._index);
- edge->_2neibors->_edges[j] = n2e->second;
+ // Generally we should not get here
+ if ( eos.ShapeType() != TopAbs_EDGE )
+ continue;
+ TopoDS_Vertex V = helper.IthVertex( 0, TopoDS::Edge( eos._shape ));
+ const SMDS_MeshNode* vN = SMESH_Algo::VertexNode( V, getMeshDS() );
+ if (( n2e = data._n2eMap.find( vN )) == data._n2eMap.end() )
+ continue;
+ const _LayerEdge* vEdge = n2e->second;
+ edge->_normal = vEdge->_normal;
+ edge->_lenFactor = vEdge->_lenFactor;
+ edge->_cosin = vEdge->_cosin;
}
- if ( !hasData )
- edge->SetDataByNeighbors( nn[0], nn[1], helper);
- }
-
- for ( size_t j = 0; j < edge->_simplices.size(); ++j )
- {
- _Simplex& s = edge->_simplices[j];
- s._nNext = data._n2eMap[ s._nNext ]->_nodes.back();
- s._nPrev = data._n2eMap[ s._nPrev ]->_nodes.back();
- }
- // For an _LayerEdge on a degenerated EDGE, copy some data from
- // a corresponding _LayerEdge on a VERTEX
- // (issue 52453, pb on a downloaded SampleCase2-Tet-netgen-mephisto.hdf)
- if ( helper.IsDegenShape( edge->_nodes[0]->getshapeId() ))
- {
- // Generally we should not get here
- const TopoDS_Shape& E = getMeshDS()->IndexToShape( edge->_nodes[0]->getshapeId() );
- if ( E.ShapeType() != TopAbs_EDGE )
- continue;
- TopoDS_Vertex V = helper.IthVertex( 0, TopoDS::Edge( E ));
- const SMDS_MeshNode* vN = SMESH_Algo::VertexNode( V, getMeshDS() );
- if (( n2e = data._n2eMap.find( vN )) == data._n2eMap.end() )
- continue;
- const _LayerEdge* vEdge = n2e->second;
- edge->_normal = vEdge->_normal;
- edge->_lenFactor = vEdge->_lenFactor;
- edge->_cosin = vEdge->_cosin;
- }
- }
+ } // loop on data._edgesOnShape._edges
+ } // loop on data._edgesOnShape
// fix _LayerEdge::_2neibors on EDGEs to smooth
- map< TGeomID,Handle(Geom_Curve)>::iterator e2c = data._edge2curve.begin();
- for ( ; e2c != data._edge2curve.end(); ++e2c )
- if ( !e2c->second.IsNull() )
- {
- size_t iEdgeEnd; int iBeg, iEnd;
- if ( data.GetShapeEdges( e2c->first, iEdgeEnd, &iBeg, &iEnd ))
- data.Sort2NeiborsOnEdge( iBeg, iEnd );
- }
+ // map< TGeomID,Handle(Geom_Curve)>::iterator e2c = data._edge2curve.begin();
+ // for ( ; e2c != data._edge2curve.end(); ++e2c )
+ // if ( !e2c->second.IsNull() )
+ // {
+ // if ( _EdgesOnShape* eos = data.GetShapeEdges( e2c->first ))
+ // data.Sort2NeiborsOnEdge( eos->_edges );
+ // }
dumpFunctionEnd();
return true;
void _ViscousBuilder::limitStepSizeByCurvature( _SolidData& data )
{
- const int nbTestPnt = 5; // on a FACE sub-shape
-
- BRepLProp_SLProps surfProp( 2, 1e-6 );
SMESH_MesherHelper helper( *_mesh );
+ BRepLProp_SLProps surfProp( 2, 1e-6 );
data._convexFaces.clear();
- TopExp_Explorer face( data._solid, TopAbs_FACE );
- for ( ; face.More(); face.Next() )
+ for ( size_t iS = 0; iS < data._edgesOnShape.size(); ++iS )
{
- const TopoDS_Face& F = TopoDS::Face( face.Current() );
- SMESH_subMesh * sm = _mesh->GetSubMesh( F );
- const TGeomID faceID = sm->GetId();
- if ( data._ignoreFaceIds.count( faceID )) continue;
+ _EdgesOnShape& eof = data._edgesOnShape[iS];
+ if ( eof.ShapeType() != TopAbs_FACE ||
+ data._ignoreFaceIds.count( eof._shapeID ))
+ continue;
+
+ TopoDS_Face F = TopoDS::Face( eof._shape );
+ const TGeomID faceID = eof._shapeID;
BRepAdaptor_Surface surface( F, false );
surfProp.SetSurface( surface );
- bool isTooCurved = false;
- int iBeg, iEnd;
-
_ConvexFace cnvFace;
- const double oriFactor = ( F.Orientation() == TopAbs_REVERSED ? +1. : -1. );
- SMESH_subMeshIteratorPtr smIt = sm->getDependsOnIterator(/*includeSelf=*/true);
- while ( smIt->more() )
- {
- sm = smIt->next();
- const TGeomID subID = sm->GetId();
- // find _LayerEdge's of a sub-shape
- size_t edgesEnd;
- if ( data.GetShapeEdges( subID, edgesEnd, &iBeg, &iEnd ))
- cnvFace._subIdToEdgeEnd.insert( make_pair( subID, edgesEnd ));
- else
- continue;
- // check concavity and curvature and limit data._stepSize
- const double minCurvature =
- 1. / ( data._hypOnShape[ edgesEnd ].GetTotalThickness() * ( 1+theThickToIntersection ));
- int nbLEdges = iEnd - iBeg;
- int iStep = Max( 1, nbLEdges / nbTestPnt );
- for ( ; iBeg < iEnd; iBeg += iStep )
- {
- gp_XY uv = helper.GetNodeUV( F, data._edges[ iBeg ]->_nodes[0] );
- surfProp.SetParameters( uv.X(), uv.Y() );
- if ( !surfProp.IsCurvatureDefined() )
- continue;
- if ( surfProp.MaxCurvature() * oriFactor > minCurvature )
- {
- limitStepSize( data, 0.9 / surfProp.MaxCurvature() * oriFactor );
- isTooCurved = true;
- }
- if ( surfProp.MinCurvature() * oriFactor > minCurvature )
- {
- limitStepSize( data, 0.9 / surfProp.MinCurvature() * oriFactor );
- isTooCurved = true;
- }
- }
- } // loop on sub-shapes of the FACE
+ cnvFace._face = F;
+ cnvFace._normalsFixed = false;
+ cnvFace._isTooCurved = false;
- if ( !isTooCurved ) continue;
+ double maxCurvature = cnvFace.GetMaxCurvature( data, eof, surfProp, helper );
+ if ( maxCurvature > 0 )
+ {
+ limitStepSize( data, 0.9 / maxCurvature );
+ findEdgesToUpdateNormalNearConvexFace( cnvFace, data, helper );
+ }
+ if ( !cnvFace._isTooCurved ) continue;
_ConvexFace & convFace =
data._convexFaces.insert( make_pair( faceID, cnvFace )).first->second;
- convFace._face = F;
- convFace._normalsFixed = false;
+ // skip a closed surface (data._convexFaces is useful anyway)
+ bool isClosedF = false;
+ helper.SetSubShape( F );
+ if ( helper.HasRealSeam() )
+ {
+ // in the closed surface there must be a closed EDGE
+ for ( TopExp_Explorer eIt( F, TopAbs_EDGE ); eIt.More() && !isClosedF; eIt.Next() )
+ isClosedF = helper.IsClosedEdge( TopoDS::Edge( eIt.Current() ));
+ }
+ if ( isClosedF )
+ {
+ // limit _LayerEdge::_maxLen on the FACE
+ const double oriFactor = ( F.Orientation() == TopAbs_REVERSED ? +1. : -1. );
+ const double minCurvature =
+ 1. / ( eof._hyp.GetTotalThickness() * ( 1 + theThickToIntersection ));
+ map< TGeomID, _EdgesOnShape* >::iterator id2eos = cnvFace._subIdToEOS.find( faceID );
+ if ( id2eos != cnvFace._subIdToEOS.end() )
+ {
+ _EdgesOnShape& eos = * id2eos->second;
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ {
+ _LayerEdge* ledge = eos._edges[ i ];
+ gp_XY uv = helper.GetNodeUV( F, ledge->_nodes[0] );
+ surfProp.SetParameters( uv.X(), uv.Y() );
+ if ( surfProp.IsCurvatureDefined() )
+ {
+ double curvature = Max( surfProp.MaxCurvature() * oriFactor,
+ surfProp.MinCurvature() * oriFactor );
+ if ( curvature > minCurvature )
+ ledge->SetMaxLen( Min( ledge->_maxLen, 1. / curvature ));
+ }
+ }
+ }
+ continue;
+ }
// Fill _ConvexFace::_simplexTestEdges. These _LayerEdge's are used to detect
// prism distortion.
- map< TGeomID, int >::iterator id2end = convFace._subIdToEdgeEnd.find( faceID );
- if ( id2end != convFace._subIdToEdgeEnd.end() )
+ map< TGeomID, _EdgesOnShape* >::iterator id2eos = convFace._subIdToEOS.find( faceID );
+ if ( id2eos != convFace._subIdToEOS.end() && !id2eos->second->_edges.empty() )
{
// there are _LayerEdge's on the FACE it-self;
// select _LayerEdge's near EDGEs
- data.GetEdgesOnShape( id2end->second, iBeg, iEnd );
- for ( ; iBeg < iEnd; ++iBeg )
+ _EdgesOnShape& eos = * id2eos->second;
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
{
- _LayerEdge* ledge = data._edges[ iBeg ];
+ _LayerEdge* ledge = eos._edges[ i ];
for ( size_t j = 0; j < ledge->_simplices.size(); ++j )
if ( ledge->_simplices[j]._nNext->GetPosition()->GetDim() < 2 )
{
- convFace._simplexTestEdges.push_back( ledge );
+ // do not select _LayerEdge's neighboring sharp EDGEs
+ bool sharpNbr = false;
+ for ( size_t iN = 0; iN < ledge->_neibors.size() && !sharpNbr; ++iN )
+ sharpNbr = ( ledge->_neibors[iN]->_cosin > theMinSmoothCosin );
+ if ( !sharpNbr )
+ convFace._simplexTestEdges.push_back( ledge );
break;
}
}
set< const SMDS_MeshNode* > usedNodes;
// look for _LayerEdge's with null _sWOL
- map< TGeomID, int >::iterator id2end = convFace._subIdToEdgeEnd.begin();
- for ( ; id2end != convFace._subIdToEdgeEnd.end(); ++id2end )
+ id2eos = convFace._subIdToEOS.begin();
+ for ( ; id2eos != convFace._subIdToEOS.end(); ++id2eos )
{
- data.GetEdgesOnShape( id2end->second, iBeg, iEnd );
- if ( iBeg >= iEnd || !data._edges[ iBeg ]->_sWOL.IsNull() )
+ _EdgesOnShape& eos = * id2eos->second;
+ if ( !eos._sWOL.IsNull() )
continue;
- for ( ; iBeg < iEnd; ++iBeg )
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
{
- _LayerEdge* ledge = data._edges[ iBeg ];
+ _LayerEdge* ledge = eos._edges[ i ];
const SMDS_MeshNode* srcNode = ledge->_nodes[0];
if ( !usedNodes.insert( srcNode ).second ) continue;
- _Simplex::GetSimplices( srcNode, ledge->_simplices, data._ignoreFaceIds, &data );
for ( size_t i = 0; i < ledge->_simplices.size(); ++i )
{
usedNodes.insert( ledge->_simplices[i]._nPrev );
//================================================================================
/*!
- * \brief Separate shapes (and _LayerEdge's on them) to smooth from the rest ones
+ * \brief Detect shapes (and _LayerEdge's on them) to smooth
*/
//================================================================================
-bool _ViscousBuilder::sortEdges( _SolidData& data,
- vector< vector<_LayerEdge*> >& edgesByGeom)
+bool _ViscousBuilder::findShapesToSmooth( _SolidData& data )
{
// define allowed thickness
- computeGeomSize( data ); // compute data._geomSize
+ computeGeomSize( data ); // compute data._geomSize and _LayerEdge::_maxLen
- data._maxThickness = 0;
- data._minThickness = 1e100;
- list< const StdMeshers_ViscousLayers* >::iterator hyp = data._hyps.begin();
- for ( ; hyp != data._hyps.end(); ++hyp )
- {
- data._maxThickness = Max( data._maxThickness, (*hyp)->GetTotalThickness() );
- data._minThickness = Min( data._minThickness, (*hyp)->GetTotalThickness() );
- }
- const double tgtThick = /*Min( 0.5 * data._geomSize, */data._maxThickness;
// Find shapes needing smoothing; such a shape has _LayerEdge._normal on it's
- // boundry inclined to the shape at a sharp angle
+ // boundary inclined to the shape at a sharp angle
- list< TGeomID > shapesToSmooth;
TopTools_MapOfShape edgesOfSmooFaces;
-
SMESH_MesherHelper helper( *_mesh );
bool ok = true;
- for ( int isEdge = 0; isEdge < 2; ++isEdge ) // loop on [ FACEs, EDGEs ]
+ vector< _EdgesOnShape >& edgesByGeom = data._edgesOnShape;
+ data._nbShapesToSmooth = 0;
+
+ for ( size_t iS = 0; iS < edgesByGeom.size(); ++iS ) // check FACEs
{
- const int dim = isEdge ? 1 : 2;
+ _EdgesOnShape& eos = edgesByGeom[iS];
+ eos._toSmooth = false;
+ if ( eos._edges.empty() || eos.ShapeType() != TopAbs_FACE )
+ continue;
- for ( size_t iS = 0; iS < edgesByGeom.size(); ++iS )
+ double tgtThick = eos._hyp.GetTotalThickness();
+ SMESH_subMeshIteratorPtr subIt = eos._subMesh->getDependsOnIterator(/*includeSelf=*/false );
+ while ( subIt->more() && !eos._toSmooth )
{
- vector<_LayerEdge*>& eS = edgesByGeom[iS];
- if ( eS.empty() ) continue;
- if ( eS[0]->_nodes[0]->GetPosition()->GetDim() != dim ) continue;
-
- const TopoDS_Shape& S = getMeshDS()->IndexToShape( iS );
- bool needSmooth = false;
- switch ( S.ShapeType() )
- {
- case TopAbs_EDGE: {
-
- const TopoDS_Edge& E = TopoDS::Edge( S );
- if ( SMESH_Algo::isDegenerated( E ) || !edgesOfSmooFaces.Contains( E ))
- break;
+ TGeomID iSub = subIt->next()->GetId();
+ const vector<_LayerEdge*>& eSub = edgesByGeom[ iSub ]._edges;
+ if ( eSub.empty() ) continue;
- TopoDS_Face F;
- if ( !eS[0]->_sWOL.IsNull() && eS[0]->_sWOL.ShapeType() == TopAbs_FACE )
- F = TopoDS::Face( eS[0]->_sWOL );
-
- for ( TopoDS_Iterator vIt( S ); vIt.More() && !needSmooth; vIt.Next() )
+ double faceSize;
+ for ( size_t i = 0; i < eSub.size() && !eos._toSmooth; ++i )
+ if ( eSub[i]->_cosin > theMinSmoothCosin )
{
- TGeomID iV = getMeshDS()->ShapeToIndex( vIt.Value() );
- vector<_LayerEdge*>& eV = edgesByGeom[ iV ];
- if ( eV.empty() ) continue;
- gp_Vec eDir = getEdgeDir( TopoDS::Edge( S ), TopoDS::Vertex( vIt.Value() ));
- double angle = eDir.Angle( eV[0]->_normal );
- double cosin = Cos( angle );
- double cosinAbs = Abs( cosin );
- if ( cosinAbs > theMinSmoothCosin )
+ SMDS_ElemIteratorPtr fIt = eSub[i]->_nodes[0]->GetInverseElementIterator(SMDSAbs_Face);
+ while ( fIt->more() && !eos._toSmooth )
{
- // always smooth analytic EDGEs
- needSmooth = ! data.CurveForSmooth( E, 0, eS.size(), F, helper, &eS ).IsNull();
-
- // compare tgtThick with the length of an end segment
- SMDS_ElemIteratorPtr eIt = eV[0]->_nodes[0]->GetInverseElementIterator(SMDSAbs_Edge);
- while ( eIt->more() && !needSmooth )
+ const SMDS_MeshElement* face = fIt->next();
+ if ( face->getshapeId() == eos._shapeID &&
+ getDistFromEdge( face, eSub[i]->_nodes[0], faceSize ))
{
- const SMDS_MeshElement* endSeg = eIt->next();
- if ( endSeg->getshapeId() == iS )
- {
- double segLen =
- SMESH_TNodeXYZ( endSeg->GetNode(0) ).Distance( endSeg->GetNode(1 ));
- needSmooth = needSmoothing( cosinAbs, tgtThick, segLen );
- }
+ eos._toSmooth = needSmoothing( eSub[i]->_cosin,
+ tgtThick * eSub[i]->_lenFactor,
+ faceSize);
}
}
}
- break;
- }
- case TopAbs_FACE: {
+ }
+ if ( eos._toSmooth )
+ {
+ for ( TopExp_Explorer eExp( edgesByGeom[iS]._shape, TopAbs_EDGE ); eExp.More(); eExp.Next() )
+ edgesOfSmooFaces.Add( eExp.Current() );
- for ( TopExp_Explorer eExp( S, TopAbs_EDGE ); eExp.More() && !needSmooth; eExp.Next() )
+ data.PrepareEdgesToSmoothOnFace( &edgesByGeom[iS], /*substituteSrcNodes=*/false );
+ }
+ data._nbShapesToSmooth += eos._toSmooth;
+
+ } // check FACEs
+
+ for ( size_t iS = 0; iS < edgesByGeom.size(); ++iS ) // check EDGEs
+ {
+ _EdgesOnShape& eos = edgesByGeom[iS];
+ eos._edgeSmoother = NULL;
+ if ( eos._edges.empty() || eos.ShapeType() != TopAbs_EDGE ) continue;
+ if ( !eos._hyp.ToSmooth() ) continue;
+
+ const TopoDS_Edge& E = TopoDS::Edge( edgesByGeom[iS]._shape );
+ if ( SMESH_Algo::isDegenerated( E ) || !edgesOfSmooFaces.Contains( E ))
+ continue;
+
+ double tgtThick = eos._hyp.GetTotalThickness();
+ for ( TopoDS_Iterator vIt( E ); vIt.More() && !eos._toSmooth; vIt.Next() )
+ {
+ TGeomID iV = getMeshDS()->ShapeToIndex( vIt.Value() );
+ vector<_LayerEdge*>& eV = edgesByGeom[ iV ]._edges;
+ if ( eV.empty() || eV[0]->Is( _LayerEdge::MULTI_NORMAL )) continue;
+ gp_Vec eDir = getEdgeDir( E, TopoDS::Vertex( vIt.Value() ));
+ double angle = eDir.Angle( eV[0]->_normal );
+ double cosin = Cos( angle );
+ double cosinAbs = Abs( cosin );
+ if ( cosinAbs > theMinSmoothCosin )
+ {
+ // always smooth analytic EDGEs
+ Handle(Geom_Curve) curve = _Smoother1D::CurveForSmooth( E, eos, helper );
+ eos._toSmooth = ! curve.IsNull();
+
+ // compare tgtThick with the length of an end segment
+ SMDS_ElemIteratorPtr eIt = eV[0]->_nodes[0]->GetInverseElementIterator(SMDSAbs_Edge);
+ while ( eIt->more() && !eos._toSmooth )
{
- TGeomID iE = getMeshDS()->ShapeToIndex( eExp.Current() );
- vector<_LayerEdge*>& eE = edgesByGeom[ iE ];
- if ( eE.empty() ) continue;
- // TopLoc_Location loc;
- // Handle(Geom_Surface) surface = BRep_Tool::Surface( TopoDS::Face( S ), loc );
- // bool isPlane = GeomLib_IsPlanarSurface( surface ).IsPlanar();
- //if ( eE[0]->_sWOL.IsNull() )
+ const SMDS_MeshElement* endSeg = eIt->next();
+ if ( endSeg->getshapeId() == (int) iS )
{
- double faceSize;
- for ( size_t i = 0; i < eE.size() && !needSmooth; ++i )
- if ( eE[i]->_cosin > theMinSmoothCosin )
- {
- SMDS_ElemIteratorPtr fIt = eE[i]->_nodes[0]->GetInverseElementIterator(SMDSAbs_Face);
- while ( fIt->more() && !needSmooth )
- {
- const SMDS_MeshElement* face = fIt->next();
- if ( getDistFromEdge( face, eE[i]->_nodes[0], faceSize ))
- needSmooth = needSmoothing( eE[i]->_cosin, tgtThick, faceSize );
- }
- }
+ double segLen =
+ SMESH_TNodeXYZ( endSeg->GetNode( 0 )).Distance( endSeg->GetNode( 1 ));
+ eos._toSmooth = needSmoothing( cosinAbs, tgtThick * eV[0]->_lenFactor, segLen );
}
- // else
- // {
- // const TopoDS_Face& F1 = TopoDS::Face( S );
- // const TopoDS_Face& F2 = TopoDS::Face( eE[0]->_sWOL );
- // const TopoDS_Edge& E = TopoDS::Edge( eExp.Current() );
- // for ( size_t i = 0; i < eE.size() && !needSmooth; ++i )
- // {
- // gp_Vec dir1 = getFaceDir( F1, E, eE[i]->_nodes[0], helper, ok );
- // gp_Vec dir2 = getFaceDir( F2, E, eE[i]->_nodes[0], helper, ok );
- // double angle = dir1.Angle( );
- // double cosin = cos( angle );
- // needSmooth = ( cosin > theMinSmoothCosin );
- // }
- // }
}
- if ( needSmooth )
- for ( TopExp_Explorer eExp( S, TopAbs_EDGE ); eExp.More(); eExp.Next() )
- edgesOfSmooFaces.Add( eExp.Current() );
-
- break;
- }
- case TopAbs_VERTEX:
- continue;
- default:;
- }
-
- if ( needSmooth )
- {
- if ( S.ShapeType() == TopAbs_EDGE ) shapesToSmooth.push_front( iS );
- else shapesToSmooth.push_back ( iS );
-
- // preparation for smoothing
- if ( S.ShapeType() == TopAbs_FACE )
+ if ( eos._toSmooth )
{
- data.PrepareEdgesToSmoothOnFace( & eS[0],
- & eS[0] + eS.size(),
- TopoDS::Face( S ),
- /*substituteSrcNodes=*/false);
+ eos._edgeSmoother = new _Smoother1D( curve, eos );
+
+ // for ( size_t i = 0; i < eos._edges.size(); ++i )
+ // eos._edges[i]->Set( _LayerEdge::TO_SMOOTH );
}
}
+ }
+ data._nbShapesToSmooth += eos._toSmooth;
- } // loop on edgesByGeom
- } // // loop on [ FACEs, EDGEs ]
-
- data._edges.reserve( data._n2eMap.size() );
- data._endEdgeOnShape.clear();
-
- // first we put _LayerEdge's on shapes to smooth
- data._nbShapesToSmooth = 0;
- list< TGeomID >::iterator gIt = shapesToSmooth.begin();
- for ( ; gIt != shapesToSmooth.end(); ++gIt )
- {
- vector<_LayerEdge*>& eVec = edgesByGeom[ *gIt ];
- if ( eVec.empty() ) continue;
- data._edges.insert( data._edges.end(), eVec.begin(), eVec.end() );
- data._endEdgeOnShape.push_back( data._edges.size() );
- data._nbShapesToSmooth++;
- eVec.clear();
- }
+ } // check EDGEs
- // then the rest _LayerEdge's
+ // Reset _cosin if no smooth is allowed by the user
for ( size_t iS = 0; iS < edgesByGeom.size(); ++iS )
{
- vector<_LayerEdge*>& eVec = edgesByGeom[iS];
- if ( eVec.empty() ) continue;
- data._edges.insert( data._edges.end(), eVec.begin(), eVec.end() );
- data._endEdgeOnShape.push_back( data._edges.size() );
- //eVec.clear();
+ _EdgesOnShape& eos = edgesByGeom[iS];
+ if ( eos._edges.empty() ) continue;
+
+ if ( !eos._hyp.ToSmooth() )
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ //eos._edges[i]->SetCosin( 0 ); // keep _cosin to use in limitMaxLenByCurvature()
+ eos._edges[i]->_lenFactor = 1;
}
- // compute average StdMeshers_ViscousLayers parameters for each shape
- data._hypOnShape.clear();
- if ( data._hyps.size() == 1 )
- {
- data._hypOnShape.resize( data._endEdgeOnShape.size(), AverageHyp( data._hyps.back() ));
- }
- else
+ // Fill _eosC1 to make that C1 FACEs and EDGEs between them to be smoothed as a whole
+
+ TopTools_MapOfShape c1VV;
+
+ for ( size_t iS = 0; iS < edgesByGeom.size(); ++iS ) // check FACEs
{
- data._hypOnShape.resize( data._endEdgeOnShape.size() );
- map< TGeomID, const StdMeshers_ViscousLayers* >::iterator f2hyp;
- for ( size_t i = 0; i < data._endEdgeOnShape.size(); ++i )
- {
- int iEnd = data._endEdgeOnShape[i];
- _LayerEdge* LE = data._edges[ iEnd-1 ];
- TGeomID iShape = LE->_nodes[0]->getshapeId();
- const TopoDS_Shape& S = getMeshDS()->IndexToShape( iShape );
- if ( S.ShapeType() == TopAbs_FACE )
- {
- if (( f2hyp = data._face2hyp.find( iShape )) != data._face2hyp.end() )
+ _EdgesOnShape& eos = edgesByGeom[iS];
+ if ( eos._edges.empty() ||
+ eos.ShapeType() != TopAbs_FACE ||
+ !eos._toSmooth )
+ continue;
+
+ // check EDGEs of a FACE
+ TopTools_MapOfShape checkedEE, allVV;
+ list< SMESH_subMesh* > smQueue( 1, eos._subMesh ); // sm of FACEs
+ while ( !smQueue.empty() )
+ {
+ SMESH_subMesh* sm = smQueue.front();
+ smQueue.pop_front();
+ SMESH_subMeshIteratorPtr smIt = sm->getDependsOnIterator(/*includeSelf=*/false);
+ while ( smIt->more() )
+ {
+ sm = smIt->next();
+ if ( sm->GetSubShape().ShapeType() == TopAbs_VERTEX )
+ allVV.Add( sm->GetSubShape() );
+ if ( sm->GetSubShape().ShapeType() != TopAbs_EDGE ||
+ !checkedEE.Add( sm->GetSubShape() ))
+ continue;
+
+ _EdgesOnShape* eoe = data.GetShapeEdges( sm->GetId() );
+ vector<_LayerEdge*>& eE = eoe->_edges;
+ if ( eE.empty() || !eoe->_sWOL.IsNull() )
+ continue;
+
+ bool isC1 = true; // check continuity along an EDGE
+ for ( size_t i = 0; i < eE.size() && isC1; ++i )
+ isC1 = ( Abs( eE[i]->_cosin ) < theMinSmoothCosin );
+ if ( !isC1 )
+ continue;
+
+ // check that mesh faces are C1 as well
{
- data._hypOnShape[ i ].Add( f2hyp->second );
+ gp_XYZ norm1, norm2;
+ const SMDS_MeshNode* n = eE[ eE.size() / 2 ]->_nodes[0];
+ SMDS_ElemIteratorPtr fIt = n->GetInverseElementIterator(SMDSAbs_Face);
+ if ( !SMESH_MeshAlgos::FaceNormal( fIt->next(), norm1, /*normalized=*/true ))
+ continue;
+ while ( fIt->more() && isC1 )
+ isC1 = ( SMESH_MeshAlgos::FaceNormal( fIt->next(), norm2, /*normalized=*/true ) &&
+ Abs( norm1 * norm2 ) >= ( 1. - theMinSmoothCosin ));
+ if ( !isC1 )
+ continue;
}
- }
- else
- {
- PShapeIteratorPtr fIt = SMESH_MesherHelper::GetAncestors( S, *_mesh, TopAbs_FACE );
+
+ // add the EDGE and an adjacent FACE to _eosC1
+ PShapeIteratorPtr fIt = helper.GetAncestors( sm->GetSubShape(), *_mesh, TopAbs_FACE );
while ( const TopoDS_Shape* face = fIt->next() )
{
- TGeomID faceID = getMeshDS()->ShapeToIndex( *face );
- if (( f2hyp = data._face2hyp.find( faceID )) != data._face2hyp.end() )
+ _EdgesOnShape* eof = data.GetShapeEdges( *face );
+ if ( !eof ) continue; // other solid
+ if ( eos._shapeID == eof->_shapeID ) continue;
+ if ( !eos.HasC1( eof ))
+ {
+ // check the FACEs
+ eos._eosC1.push_back( eof );
+ eof->_toSmooth = false;
+ data.PrepareEdgesToSmoothOnFace( eof, /*substituteSrcNodes=*/false );
+ smQueue.push_back( eof->_subMesh );
+ }
+ if ( !eos.HasC1( eoe ))
{
- data._hypOnShape[ i ].Add( f2hyp->second );
+ eos._eosC1.push_back( eoe );
+ eoe->_toSmooth = false;
+ data.PrepareEdgesToSmoothOnFace( eoe, /*substituteSrcNodes=*/false );
}
}
}
}
- }
+ if ( eos._eosC1.empty() )
+ continue;
+
+ // check VERTEXes of C1 FACEs
+ TopTools_MapIteratorOfMapOfShape vIt( allVV );
+ for ( ; vIt.More(); vIt.Next() )
+ {
+ _EdgesOnShape* eov = data.GetShapeEdges( vIt.Key() );
+ if ( !eov || eov->_edges.empty() || !eov->_sWOL.IsNull() )
+ continue;
+
+ bool isC1 = true; // check if all adjacent FACEs are in eos._eosC1
+ PShapeIteratorPtr fIt = helper.GetAncestors( vIt.Key(), *_mesh, TopAbs_FACE );
+ while ( const TopoDS_Shape* face = fIt->next() )
+ {
+ _EdgesOnShape* eof = data.GetShapeEdges( *face );
+ if ( !eof ) continue; // other solid
+ isC1 = ( face->IsSame( eos._shape ) || eos.HasC1( eof ));
+ if ( !isC1 )
+ break;
+ }
+ if ( isC1 )
+ {
+ eos._eosC1.push_back( eov );
+ data.PrepareEdgesToSmoothOnFace( eov, /*substituteSrcNodes=*/false );
+ c1VV.Add( eov->_shape );
+ }
+ }
+
+ } // fill _eosC1 of FACEs
+
+
+ // Find C1 EDGEs
+
+ vector< pair< _EdgesOnShape*, gp_XYZ > > dirOfEdges;
+
+ for ( size_t iS = 0; iS < edgesByGeom.size(); ++iS ) // check VERTEXes
+ {
+ _EdgesOnShape& eov = edgesByGeom[iS];
+ if ( eov._edges.empty() ||
+ eov.ShapeType() != TopAbs_VERTEX ||
+ c1VV.Contains( eov._shape ))
+ continue;
+ const TopoDS_Vertex& V = TopoDS::Vertex( eov._shape );
+
+ // get directions of surrounding EDGEs
+ dirOfEdges.clear();
+ PShapeIteratorPtr fIt = helper.GetAncestors( eov._shape, *_mesh, TopAbs_EDGE );
+ while ( const TopoDS_Shape* e = fIt->next() )
+ {
+ _EdgesOnShape* eoe = data.GetShapeEdges( *e );
+ if ( !eoe ) continue; // other solid
+ gp_XYZ eDir = getEdgeDir( TopoDS::Edge( *e ), V );
+ if ( !Precision::IsInfinite( eDir.X() ))
+ dirOfEdges.push_back( make_pair( eoe, eDir.Normalized() ));
+ }
+
+ // find EDGEs with C1 directions
+ for ( size_t i = 0; i < dirOfEdges.size(); ++i )
+ for ( size_t j = i+1; j < dirOfEdges.size(); ++j )
+ if ( dirOfEdges[i].first && dirOfEdges[j].first )
+ {
+ double dot = dirOfEdges[i].second * dirOfEdges[j].second;
+ bool isC1 = ( dot < - ( 1. - theMinSmoothCosin ));
+ if ( isC1 )
+ {
+ double maxEdgeLen = 3 * Min( eov._edges[0]->_maxLen, eov._hyp.GetTotalThickness() );
+ for ( int isJ = 0; isJ < 2; ++isJ ) // loop on [i,j]
+ {
+ size_t k = isJ ? j : i;
+ const TopoDS_Edge& e = TopoDS::Edge( dirOfEdges[k].first->_shape );
+ double eLen = SMESH_Algo::EdgeLength( e );
+ if ( eLen < maxEdgeLen )
+ {
+ TopoDS_Shape oppV = SMESH_MesherHelper::IthVertex( 0, e );
+ if ( oppV.IsSame( V ))
+ oppV = SMESH_MesherHelper::IthVertex( 1, e );
+ _EdgesOnShape* eovOpp = data.GetShapeEdges( oppV );
+ if ( dirOfEdges[k].second * eovOpp->_edges[0]->_normal < 0 )
+ eov._eosC1.push_back( dirOfEdges[k].first );
+ }
+ dirOfEdges[k].first = 0;
+ }
+ }
+ }
+ } // fill _eosC1 of VERTEXes
+
+
return ok;
}
//================================================================================
/*!
- * \brief Set data of _LayerEdge needed for smoothing
- * \param subIds - ids of sub-shapes of a SOLID to take into account faces from
+ * \brief Set up _SolidData::_edgesOnShape
*/
//================================================================================
-bool _ViscousBuilder::setEdgeData(_LayerEdge& edge,
- const set<TGeomID>& subIds,
- SMESH_MesherHelper& helper,
- _SolidData& data)
+void _ViscousBuilder::makeEdgesOnShape()
{
- SMESH_MeshEditor editor(_mesh);
+ const int nbShapes = getMeshDS()->MaxShapeIndex();
- const SMDS_MeshNode* node = edge._nodes[0]; // source node
- const SMDS_TypeOfPosition posType = node->GetPosition()->GetTypeOfPosition();
+ for ( size_t i = 0; i < _sdVec.size(); ++i )
+ {
+ _SolidData& data = _sdVec[ i ];
+ vector< _EdgesOnShape >& edgesByGeom = data._edgesOnShape;
+ edgesByGeom.resize( nbShapes+1 );
- edge._len = 0;
- edge._2neibors = 0;
- edge._curvature = 0;
+ // set data of _EdgesOnShape's
+ if ( SMESH_subMesh* sm = _mesh->GetSubMesh( data._solid ))
+ {
+ SMESH_subMeshIteratorPtr smIt = sm->getDependsOnIterator(/*includeSelf=*/false);
+ while ( smIt->more() )
+ {
+ sm = smIt->next();
+ if ( sm->GetSubShape().ShapeType() == TopAbs_FACE &&
+ data._ignoreFaceIds.count( sm->GetId() ))
+ continue;
+
+ setShapeData( edgesByGeom[ sm->GetId() ], sm, data );
+ }
+ }
+ }
+}
+
+//================================================================================
+/*!
+ * \brief initialize data of _EdgesOnShape
+ */
+//================================================================================
+
+void _ViscousBuilder::setShapeData( _EdgesOnShape& eos,
+ SMESH_subMesh* sm,
+ _SolidData& data )
+{
+ if ( !eos._shape.IsNull() ||
+ sm->GetSubShape().ShapeType() == TopAbs_WIRE )
+ return;
+
+ SMESH_MesherHelper helper( *_mesh );
+
+ eos._subMesh = sm;
+ eos._shapeID = sm->GetId();
+ eos._shape = sm->GetSubShape();
+ if ( eos.ShapeType() == TopAbs_FACE )
+ eos._shape.Orientation( helper.GetSubShapeOri( data._solid, eos._shape ));
+ eos._toSmooth = false;
+ eos._data = &data;
+
+ // set _SWOL
+ map< TGeomID, TopoDS_Shape >::const_iterator s2s =
+ data._shrinkShape2Shape.find( eos._shapeID );
+ if ( s2s != data._shrinkShape2Shape.end() )
+ eos._sWOL = s2s->second;
+
+ eos._isRegularSWOL = true;
+ if ( eos.SWOLType() == TopAbs_FACE )
+ {
+ const TopoDS_Face& F = TopoDS::Face( eos._sWOL );
+ Handle(ShapeAnalysis_Surface) surface = helper.GetSurface( F );
+ eos._isRegularSWOL = ( ! surface->HasSingularities( 1e-7 ));
+ }
+
+ // set _hyp
+ if ( data._hyps.size() == 1 )
+ {
+ eos._hyp = data._hyps.back();
+ }
+ else
+ {
+ // compute average StdMeshers_ViscousLayers parameters
+ map< TGeomID, const StdMeshers_ViscousLayers* >::iterator f2hyp;
+ if ( eos.ShapeType() == TopAbs_FACE )
+ {
+ if (( f2hyp = data._face2hyp.find( eos._shapeID )) != data._face2hyp.end() )
+ eos._hyp = f2hyp->second;
+ }
+ else
+ {
+ PShapeIteratorPtr fIt = helper.GetAncestors( eos._shape, *_mesh, TopAbs_FACE );
+ while ( const TopoDS_Shape* face = fIt->next() )
+ {
+ TGeomID faceID = getMeshDS()->ShapeToIndex( *face );
+ if (( f2hyp = data._face2hyp.find( faceID )) != data._face2hyp.end() )
+ eos._hyp.Add( f2hyp->second );
+ }
+ }
+ }
+
+ // set _faceNormals
+ if ( ! eos._hyp.UseSurfaceNormal() )
+ {
+ if ( eos.ShapeType() == TopAbs_FACE ) // get normals to elements on a FACE
+ {
+ SMESHDS_SubMesh* smDS = sm->GetSubMeshDS();
+ if ( !smDS ) return;
+ eos._faceNormals.reserve( smDS->NbElements() );
+
+ double oriFactor = helper.IsReversedSubMesh( TopoDS::Face( eos._shape )) ? 1.: -1.;
+ SMDS_ElemIteratorPtr eIt = smDS->GetElements();
+ for ( ; eIt->more(); )
+ {
+ const SMDS_MeshElement* face = eIt->next();
+ gp_XYZ& norm = eos._faceNormals[face];
+ if ( !SMESH_MeshAlgos::FaceNormal( face, norm, /*normalized=*/true ))
+ norm.SetCoord( 0,0,0 );
+ norm *= oriFactor;
+ }
+ }
+ else // find EOS of adjacent FACEs
+ {
+ PShapeIteratorPtr fIt = helper.GetAncestors( eos._shape, *_mesh, TopAbs_FACE );
+ while ( const TopoDS_Shape* face = fIt->next() )
+ {
+ TGeomID faceID = getMeshDS()->ShapeToIndex( *face );
+ eos._faceEOS.push_back( & data._edgesOnShape[ faceID ]);
+ if ( eos._faceEOS.back()->_shape.IsNull() )
+ // avoid using uninitialised _shapeID in GetNormal()
+ eos._faceEOS.back()->_shapeID = faceID;
+ }
+ }
+ }
+}
+
+//================================================================================
+/*!
+ * \brief Returns normal of a face
+ */
+//================================================================================
+
+bool _EdgesOnShape::GetNormal( const SMDS_MeshElement* face, gp_Vec& norm )
+{
+ bool ok = false;
+ _EdgesOnShape* eos = 0;
+
+ if ( face->getshapeId() == _shapeID )
+ {
+ eos = this;
+ }
+ else
+ {
+ for ( size_t iF = 0; iF < _faceEOS.size() && !eos; ++iF )
+ if ( face->getshapeId() == _faceEOS[ iF ]->_shapeID )
+ eos = _faceEOS[ iF ];
+ }
+
+ if (( eos ) &&
+ ( ok = ( eos->_faceNormals.count( face ) )))
+ {
+ norm = eos->_faceNormals[ face ];
+ }
+ else if ( !eos )
+ {
+ debugMsg( "_EdgesOnShape::Normal() failed for face "<<face->GetID()
+ << " on _shape #" << _shapeID );
+ }
+ return ok;
+}
+
+//================================================================================
+/*!
+ * \brief EdgesOnShape destructor
+ */
+//================================================================================
+
+_EdgesOnShape::~_EdgesOnShape()
+{
+ delete _edgeSmoother;
+}
+
+//================================================================================
+/*!
+ * \brief Set data of _LayerEdge needed for smoothing
+ */
+//================================================================================
+
+bool _ViscousBuilder::setEdgeData(_LayerEdge& edge,
+ _EdgesOnShape& eos,
+ SMESH_MesherHelper& helper,
+ _SolidData& data)
+{
+ const SMDS_MeshNode* node = edge._nodes[0]; // source node
+
+ edge._len = 0;
+ edge._maxLen = Precision::Infinite();
+ edge._minAngle = 0;
+ edge._2neibors = 0;
+ edge._curvature = 0;
+ edge._flags = 0;
+ edge._smooFunction = 0;
// --------------------------
// Compute _normal and _cosin
// --------------------------
- edge._cosin = 0;
+ edge._cosin = 0;
+ edge._lenFactor = 1.;
edge._normal.SetCoord(0,0,0);
+ _Simplex::GetSimplices( node, edge._simplices, data._ignoreFaceIds, &data );
int totalNbFaces = 0;
TopoDS_Face F;
gp_Vec geomNorm;
bool normOK = true;
+ const bool onShrinkShape = !eos._sWOL.IsNull();
+ const bool useGeometry = (( eos._hyp.UseSurfaceNormal() ) ||
+ ( eos.ShapeType() != TopAbs_FACE /*&& !onShrinkShape*/ ));
+
// get geom FACEs the node lies on
+ //if ( useGeometry )
{
set<TGeomID> faceIds;
- if ( posType == SMDS_TOP_FACE )
+ if ( eos.ShapeType() == TopAbs_FACE )
{
- faceIds.insert( node->getshapeId() );
+ faceIds.insert( eos._shapeID );
}
else
{
SMDS_ElemIteratorPtr fIt = node->GetInverseElementIterator(SMDSAbs_Face);
while ( fIt->more() )
- faceIds.insert( editor.FindShape(fIt->next()));
+ faceIds.insert( fIt->next()->getshapeId() );
}
set<TGeomID>::iterator id = faceIds.begin();
for ( ; id != faceIds.end(); ++id )
{
const TopoDS_Shape& s = getMeshDS()->IndexToShape( *id );
- if ( s.IsNull() || s.ShapeType() != TopAbs_FACE || !subIds.count( *id ))
+ if ( s.IsNull() || s.ShapeType() != TopAbs_FACE || data._ignoreFaceIds.count( *id ))
continue;
F = TopoDS::Face( s );
face2Norm[ totalNbFaces ].first = F;
}
}
- const TGeomID shapeInd = node->getshapeId();
- map< TGeomID, TopoDS_Shape >::const_iterator s2s = data._shrinkShape2Shape.find( shapeInd );
- const bool onShrinkShape ( s2s != data._shrinkShape2Shape.end() );
-
// find _normal
- if ( onShrinkShape ) // one of faces the node is on has no layers
+ bool fromVonF = false;
+ if ( useGeometry )
{
- TopoDS_Shape vertEdge = getMeshDS()->IndexToShape( s2s->first ); // vertex or edge
- if ( s2s->second.ShapeType() == TopAbs_EDGE )
- {
- // inflate from VERTEX along EDGE
- edge._normal = getEdgeDir( TopoDS::Edge( s2s->second ), TopoDS::Vertex( vertEdge ));
- }
- else if ( vertEdge.ShapeType() == TopAbs_VERTEX )
- {
- // inflate from VERTEX along FACE
- edge._normal = getFaceDir( TopoDS::Face( s2s->second ), TopoDS::Vertex( vertEdge ),
- node, helper, normOK, &edge._cosin);
- }
- else
+ fromVonF = ( eos.ShapeType() == TopAbs_VERTEX &&
+ eos.SWOLType() == TopAbs_FACE &&
+ totalNbFaces > 1 );
+
+ if ( onShrinkShape && !fromVonF ) // one of faces the node is on has no layers
{
- // inflate from EDGE along FACE
- edge._normal = getFaceDir( TopoDS::Face( s2s->second ), TopoDS::Edge( vertEdge ),
- node, helper, normOK);
+ if ( eos.SWOLType() == TopAbs_EDGE )
+ {
+ // inflate from VERTEX along EDGE
+ edge._normal = getEdgeDir( TopoDS::Edge( eos._sWOL ), TopoDS::Vertex( eos._shape ));
+ }
+ else if ( eos.ShapeType() == TopAbs_VERTEX )
+ {
+ // inflate from VERTEX along FACE
+ edge._normal = getFaceDir( TopoDS::Face( eos._sWOL ), TopoDS::Vertex( eos._shape ),
+ node, helper, normOK, &edge._cosin);
+ }
+ else
+ {
+ // inflate from EDGE along FACE
+ edge._normal = getFaceDir( TopoDS::Face( eos._sWOL ), TopoDS::Edge( eos._shape ),
+ node, helper, normOK);
+ }
}
- }
- else // layers are on all faces of SOLID the node is on
- {
- int nbOkNorms = 0;
- for ( int iF = 0; iF < totalNbFaces; ++iF )
+ else // layers are on all FACEs of SOLID the node is on (or fromVonF)
{
- F = TopoDS::Face( face2Norm[ iF ].first );
- geomNorm = getFaceNormal( node, F, helper, normOK );
- if ( !normOK ) continue;
- nbOkNorms++;
-
- if ( helper.GetSubShapeOri( data._solid, F ) != TopAbs_REVERSED )
- geomNorm.Reverse();
- face2Norm[ iF ].second = geomNorm.XYZ();
- edge._normal += geomNorm.XYZ();
- }
- if ( nbOkNorms == 0 )
- return error(SMESH_Comment("Can't get normal to node ") << node->GetID(), data._index);
+ if ( fromVonF )
+ face2Norm[ totalNbFaces++ ].first = TopoDS::Face( eos._sWOL );
- if ( edge._normal.Modulus() < 1e-3 && nbOkNorms > 1 )
- {
- // opposite normals, re-get normals at shifted positions (IPAL 52426)
- edge._normal.SetCoord( 0,0,0 );
- for ( int iF = 0; iF < totalNbFaces; ++iF )
+ int nbOkNorms = 0;
+ for ( int iF = totalNbFaces - 1; iF >= 0; --iF )
{
- const TopoDS_Face& F = face2Norm[iF].first;
- geomNorm = getFaceNormal( node, F, helper, normOK, /*shiftInside=*/true );
+ F = face2Norm[ iF ].first;
+ geomNorm = getFaceNormal( node, F, helper, normOK );
+ if ( !normOK ) continue;
+ nbOkNorms++;
+
if ( helper.GetSubShapeOri( data._solid, F ) != TopAbs_REVERSED )
geomNorm.Reverse();
- if ( normOK )
- face2Norm[ iF ].second = geomNorm.XYZ();
- edge._normal += face2Norm[ iF ].second;
+ face2Norm[ iF ].second = geomNorm.XYZ();
+ edge._normal += geomNorm.XYZ();
}
- }
+ if ( nbOkNorms == 0 )
+ return error(SMESH_Comment("Can't get normal to node ") << node->GetID(), data._index);
- if ( totalNbFaces < 3 )
- {
- //edge._normal /= totalNbFaces;
- }
- else
- {
- edge._normal = getWeigthedNormal( node, face2Norm, totalNbFaces );
+ if ( totalNbFaces >= 3 )
+ {
+ edge._normal = getNormalByOffset( &edge, face2Norm, totalNbFaces, fromVonF );
+ }
+
+ if ( edge._normal.Modulus() < 1e-3 && nbOkNorms > 1 )
+ {
+ // opposite normals, re-get normals at shifted positions (IPAL 52426)
+ edge._normal.SetCoord( 0,0,0 );
+ for ( int iF = 0; iF < totalNbFaces - fromVonF; ++iF )
+ {
+ const TopoDS_Face& F = face2Norm[iF].first;
+ geomNorm = getFaceNormal( node, F, helper, normOK, /*shiftInside=*/true );
+ if ( helper.GetSubShapeOri( data._solid, F ) != TopAbs_REVERSED )
+ geomNorm.Reverse();
+ if ( normOK )
+ face2Norm[ iF ].second = geomNorm.XYZ();
+ edge._normal += face2Norm[ iF ].second;
+ }
+ }
}
}
-
- // set _cosin
- switch ( posType )
+ else // !useGeometry - get _normal using surrounding mesh faces
{
- case SMDS_TOP_FACE: {
- edge._cosin = 0;
- break;
- }
- case SMDS_TOP_EDGE: {
- TopoDS_Edge E = TopoDS::Edge( helper.GetSubShapeByNode( node, getMeshDS()));
- gp_Vec inFaceDir = getFaceDir( F, E, node, helper, normOK );
- double angle = inFaceDir.Angle( edge._normal ); // [0,PI]
- edge._cosin = Cos( angle );
- //cout << "Cosin on EDGE " << edge._cosin << " node " << node->GetID() << endl;
- break;
+ edge._normal = getWeigthedNormal( &edge );
+
+ // set<TGeomID> faceIds;
+ //
+ // SMDS_ElemIteratorPtr fIt = node->GetInverseElementIterator(SMDSAbs_Face);
+ // while ( fIt->more() )
+ // {
+ // const SMDS_MeshElement* face = fIt->next();
+ // if ( eos.GetNormal( face, geomNorm ))
+ // {
+ // if ( onShrinkShape && !faceIds.insert( face->getshapeId() ).second )
+ // continue; // use only one mesh face on FACE
+ // edge._normal += geomNorm.XYZ();
+ // totalNbFaces++;
+ // }
+ // }
}
- case SMDS_TOP_VERTEX: {
- TopoDS_Vertex V = TopoDS::Vertex( helper.GetSubShapeByNode( node, getMeshDS()));
- gp_Vec inFaceDir = getFaceDir( F, V, node, helper, normOK );
- double angle = inFaceDir.Angle( edge._normal ); // [0,PI]
- edge._cosin = Cos( angle );
- if ( totalNbFaces > 2 || helper.IsSeamShape( node->getshapeId() ))
- for ( int iF = totalNbFaces-2; iF >=0; --iF )
+
+ // compute _cosin
+ //if ( eos._hyp.UseSurfaceNormal() )
+ {
+ switch ( eos.ShapeType() )
+ {
+ case TopAbs_FACE: {
+ edge._cosin = 0;
+ break;
+ }
+ case TopAbs_EDGE: {
+ TopoDS_Edge E = TopoDS::Edge( eos._shape );
+ gp_Vec inFaceDir = getFaceDir( F, E, node, helper, normOK );
+ double angle = inFaceDir.Angle( edge._normal ); // [0,PI]
+ edge._cosin = Cos( angle );
+ break;
+ }
+ case TopAbs_VERTEX: {
+ if ( fromVonF )
{
- F = face2Norm[ iF ].first;
- inFaceDir = getFaceDir( F, V, node, helper, normOK );
- if ( normOK ) {
- double angle = inFaceDir.Angle( edge._normal );
- edge._cosin = Max( edge._cosin, Cos( angle ));
- }
+ getFaceDir( TopoDS::Face( eos._sWOL ), TopoDS::Vertex( eos._shape ),
+ node, helper, normOK, &edge._cosin );
}
- //cout << "Cosin on VERTEX " << edge._cosin << " node " << node->GetID() << endl;
- break;
- }
- default:
- return error(SMESH_Comment("Invalid shape position of node ")<<node, data._index);
+ else if ( eos.SWOLType() != TopAbs_FACE ) // else _cosin is set by getFaceDir()
+ {
+ TopoDS_Vertex V = TopoDS::Vertex( eos._shape );
+ gp_Vec inFaceDir = getFaceDir( F, V, node, helper, normOK );
+ double angle = inFaceDir.Angle( edge._normal ); // [0,PI]
+ edge._cosin = Cos( angle );
+ if ( totalNbFaces > 2 || helper.IsSeamShape( node->getshapeId() ))
+ for ( int iF = 1; iF < totalNbFaces; ++iF )
+ {
+ F = face2Norm[ iF ].first;
+ inFaceDir = getFaceDir( F, V, node, helper, normOK=true );
+ if ( normOK ) {
+ double angle = inFaceDir.Angle( edge._normal );
+ double cosin = Cos( angle );
+ if ( Abs( cosin ) > Abs( edge._cosin ))
+ edge._cosin = cosin;
+ }
+ }
+ }
+ break;
+ }
+ default:
+ return error(SMESH_Comment("Invalid shape position of node ")<<node, data._index);
+ }
}
double normSize = edge._normal.SquareModulus();
edge._normal /= sqrt( normSize );
- // TODO: if ( !normOK ) then get normal by mesh faces
+ if ( edge.Is( _LayerEdge::MULTI_NORMAL ) && edge._nodes.size() == 2 )
+ {
+ getMeshDS()->RemoveFreeNode( edge._nodes.back(), 0, /*fromGroups=*/false );
+ edge._nodes.resize( 1 );
+ edge._normal.SetCoord( 0,0,0 );
+ edge.SetMaxLen( 0 );
+ }
// Set the rest data
// --------------------
+
+ edge.SetCosin( edge._cosin ); // to update edge._lenFactor
+
if ( onShrinkShape )
{
- edge._sWOL = (*s2s).second;
-
- SMDS_MeshNode* tgtNode = const_cast<SMDS_MeshNode*>( edge._nodes.back() );
+ const SMDS_MeshNode* tgtNode = edge._nodes.back();
if ( SMESHDS_SubMesh* sm = getMeshDS()->MeshElements( data._solid ))
- sm->RemoveNode( tgtNode , /*isNodeDeleted=*/false );
+ sm->RemoveNode( tgtNode );
// set initial position which is parameters on _sWOL in this case
- if ( edge._sWOL.ShapeType() == TopAbs_EDGE )
+ if ( eos.SWOLType() == TopAbs_EDGE )
{
- double u = helper.GetNodeU( TopoDS::Edge( edge._sWOL ), node, 0, &normOK );
+ double u = helper.GetNodeU( TopoDS::Edge( eos._sWOL ), node, 0, &normOK );
edge._pos.push_back( gp_XYZ( u, 0, 0 ));
if ( edge._nodes.size() > 1 )
- getMeshDS()->SetNodeOnEdge( tgtNode, TopoDS::Edge( edge._sWOL ), u );
+ getMeshDS()->SetNodeOnEdge( tgtNode, TopoDS::Edge( eos._sWOL ), u );
}
- else // TopAbs_FACE
+ else // eos.SWOLType() == TopAbs_FACE
{
- gp_XY uv = helper.GetNodeUV( TopoDS::Face( edge._sWOL ), node, 0, &normOK );
+ gp_XY uv = helper.GetNodeUV( TopoDS::Face( eos._sWOL ), node, 0, &normOK );
edge._pos.push_back( gp_XYZ( uv.X(), uv.Y(), 0));
if ( edge._nodes.size() > 1 )
- getMeshDS()->SetNodeOnFace( tgtNode, TopoDS::Face( edge._sWOL ), uv.X(), uv.Y() );
+ getMeshDS()->SetNodeOnFace( tgtNode, TopoDS::Face( eos._sWOL ), uv.X(), uv.Y() );
+ }
+
+ if ( edge._nodes.size() > 1 )
+ {
+ // check if an angle between a FACE with layers and SWOL is sharp,
+ // else the edge should not inflate
+ F.Nullify();
+ for ( int iF = 0; iF < totalNbFaces && F.IsNull(); ++iF ) // find a FACE with VL
+ if ( ! helper.IsSubShape( eos._sWOL, face2Norm[iF].first ))
+ F = face2Norm[iF].first;
+ if ( !F.IsNull())
+ {
+ geomNorm = getFaceNormal( node, F, helper, normOK );
+ if ( helper.GetSubShapeOri( data._solid, F ) != TopAbs_REVERSED )
+ geomNorm.Reverse(); // inside the SOLID
+ if ( geomNorm * edge._normal < -0.001 )
+ {
+ getMeshDS()->RemoveFreeNode( tgtNode, 0, /*fromGroups=*/false );
+ edge._nodes.resize( 1 );
+ }
+ else if ( edge._lenFactor > 3 )
+ {
+ edge._lenFactor = 2;
+ edge.Set( _LayerEdge::RISKY_SWOL );
+ }
+ }
}
}
else
{
edge._pos.push_back( SMESH_TNodeXYZ( node ));
- if ( posType == SMDS_TOP_FACE )
+ if ( eos.ShapeType() == TopAbs_FACE )
{
- _Simplex::GetSimplices( node, edge._simplices, data._ignoreFaceIds, &data );
+ double angle;
+ for ( size_t i = 0; i < edge._simplices.size(); ++i )
+ {
+ edge._simplices[i].IsMinAngleOK( edge._pos.back(), angle );
+ edge._minAngle = Max( edge._minAngle, angle ); // "angle" is actually cosine
+ }
}
}
- // Set neighbour nodes for a _LayerEdge based on EDGE
+ // Set neighbor nodes for a _LayerEdge based on EDGE
- if ( posType == SMDS_TOP_EDGE /*||
+ if ( eos.ShapeType() == TopAbs_EDGE /*||
( onShrinkShape && posType == SMDS_TOP_VERTEX && fabs( edge._cosin ) < 1e-10 )*/)
{
- edge._2neibors = new _2NearEdges;
- // target node instead of source ones will be set later
- // if ( ! findNeiborsOnEdge( &edge,
- // edge._2neibors->_nodes[0],
- // edge._2neibors->_nodes[1],
- // data))
- // return false;
- // edge.SetDataByNeighbors( edge._2neibors->_nodes[0],
- // edge._2neibors->_nodes[1],
- // helper);
+ edge._2neibors = _Factory::NewNearEdges();
+ // target nodes instead of source ones will be set later
}
- edge.SetCosin( edge._cosin ); // to update edge._lenFactor
-
return true;
}
isOK = false;
return p.XYZ();
}
- Quantity_Parameter U,V;
+ Standard_Real U,V;
projector.LowerDistanceParameters(U,V);
uv.SetCoord( U,V );
}
bool _ViscousBuilder::getFaceNormalAtSingularity( const gp_XY& uv,
const TopoDS_Face& face,
- SMESH_MesherHelper& helper,
+ SMESH_MesherHelper& /*helper*/,
gp_Dir& normal )
{
BRepAdaptor_Surface surface( face );
//================================================================================
/*!
- * \brief Return a normal at a node weighted with angles taken by FACEs
- * \param [in] n - the node
- * \param [in] fId2Normal - FACE ids and normals
- * \param [in] nbFaces - nb of FACEs meeting at the node
- * \return gp_XYZ - computed normal
+ * \brief Return a normal at a node weighted with angles taken by faces
+ */
+//================================================================================
+
+gp_XYZ _ViscousBuilder::getWeigthedNormal( const _LayerEdge* edge )
+{
+ const SMDS_MeshNode* n = edge->_nodes[0];
+
+ gp_XYZ resNorm(0,0,0);
+ SMESH_TNodeXYZ p0( n ), pP, pN;
+ for ( size_t i = 0; i < edge->_simplices.size(); ++i )
+ {
+ pP.Set( edge->_simplices[i]._nPrev );
+ pN.Set( edge->_simplices[i]._nNext );
+ gp_Vec v0P( p0, pP ), v0N( p0, pN ), vPN( pP, pN ), norm = v0P ^ v0N;
+ double l0P = v0P.SquareMagnitude();
+ double l0N = v0N.SquareMagnitude();
+ double lPN = vPN.SquareMagnitude();
+ if ( l0P < std::numeric_limits<double>::min() ||
+ l0N < std::numeric_limits<double>::min() ||
+ lPN < std::numeric_limits<double>::min() )
+ continue;
+ double lNorm = norm.SquareMagnitude();
+ double sin2 = lNorm / l0P / l0N;
+ double angle = ACos(( v0P * v0N ) / Sqrt( l0P ) / Sqrt( l0N ));
+
+ double weight = sin2 * angle / lPN;
+ resNorm += weight * norm.XYZ() / Sqrt( lNorm );
+ }
+
+ return resNorm;
+}
+
+//================================================================================
+/*!
+ * \brief Return a normal at a node by getting a common point of offset planes
+ * defined by the FACE normals
*/
//================================================================================
-gp_XYZ _ViscousBuilder::getWeigthedNormal( const SMDS_MeshNode* n,
- std::pair< TopoDS_Face, gp_XYZ > fId2Normal[],
- int nbFaces )
+gp_XYZ _ViscousBuilder::getNormalByOffset( _LayerEdge* edge,
+ std::pair< TopoDS_Face, gp_XYZ > f2Normal[],
+ int nbFaces,
+ bool lastNoOffset)
{
+ SMESH_TNodeXYZ p0 = edge->_nodes[0];
+
gp_XYZ resNorm(0,0,0);
- TopoDS_Shape V = SMESH_MesherHelper::GetSubShapeByNode( n, getMeshDS() );
- if ( V.ShapeType() != TopAbs_VERTEX )
+ TopoDS_Shape V = SMESH_MesherHelper::GetSubShapeByNode( p0._node, getMeshDS() );
+ if ( V.ShapeType() != TopAbs_VERTEX || nbFaces < 3 )
{
for ( int i = 0; i < nbFaces; ++i )
- resNorm += fId2Normal[i].second;
+ resNorm += f2Normal[i].second;
return resNorm;
}
- // exclude equal normals
- //int nbUniqNorms = nbFaces;
+ // prepare _OffsetPlane's
+ vector< _OffsetPlane > pln( nbFaces );
+ for ( int i = 0; i < nbFaces - lastNoOffset; ++i )
+ {
+ pln[i]._faceIndex = i;
+ pln[i]._plane = gp_Pln( p0 + f2Normal[i].second, f2Normal[i].second );
+ }
+ if ( lastNoOffset )
+ {
+ pln[ nbFaces - 1 ]._faceIndex = nbFaces - 1;
+ pln[ nbFaces - 1 ]._plane = gp_Pln( p0, f2Normal[ nbFaces - 1 ].second );
+ }
+
+ // intersect neighboring OffsetPlane's
+ PShapeIteratorPtr edgeIt = SMESH_MesherHelper::GetAncestors( V, *_mesh, TopAbs_EDGE );
+ while ( const TopoDS_Shape* edge = edgeIt->next() )
+ {
+ int f1 = -1, f2 = -1;
+ for ( int i = 0; i < nbFaces && f2 < 0; ++i )
+ if ( SMESH_MesherHelper::IsSubShape( *edge, f2Normal[i].first ))
+ (( f1 < 0 ) ? f1 : f2 ) = i;
+
+ if ( f2 >= 0 )
+ pln[ f1 ].ComputeIntersectionLine( pln[ f2 ], TopoDS::Edge( *edge ), TopoDS::Vertex( V ));
+ }
+
+ // get a common point
+ gp_XYZ commonPnt( 0, 0, 0 );
+ int nbPoints = 0;
+ bool isPointFound;
for ( int i = 0; i < nbFaces; ++i )
- for ( int j = i+1; j < nbFaces; ++j )
- if ( fId2Normal[i].second.IsEqual( fId2Normal[j].second, 0.1 ))
- {
- fId2Normal[i].second.SetCoord( 0,0,0 );
- //--nbUniqNorms;
- break;
- }
- //if ( nbUniqNorms < 3 )
{
- for ( int i = 0; i < nbFaces; ++i )
- resNorm += fId2Normal[i].second;
+ commonPnt += pln[ i ].GetCommonPoint( isPointFound, TopoDS::Vertex( V ));
+ nbPoints += isPointFound;
+ }
+ gp_XYZ wgtNorm = getWeigthedNormal( edge );
+ if ( nbPoints == 0 )
+ return wgtNorm;
+
+ commonPnt /= nbPoints;
+ resNorm = commonPnt - p0;
+ if ( lastNoOffset )
return resNorm;
+
+ // choose the best among resNorm and wgtNorm
+ resNorm.Normalize();
+ wgtNorm.Normalize();
+ double resMinDot = std::numeric_limits<double>::max();
+ double wgtMinDot = std::numeric_limits<double>::max();
+ for ( int i = 0; i < nbFaces - lastNoOffset; ++i )
+ {
+ resMinDot = Min( resMinDot, resNorm * f2Normal[i].second );
+ wgtMinDot = Min( wgtMinDot, wgtNorm * f2Normal[i].second );
}
- double angles[30];
- for ( int i = 0; i < nbFaces; ++i )
+ if ( Max( resMinDot, wgtMinDot ) < theMinSmoothCosin )
{
- const TopoDS_Face& F = fId2Normal[i].first;
+ edge->Set( _LayerEdge::MULTI_NORMAL );
+ }
- // look for two EDGEs shared by F and other FACEs within fId2Normal
- TopoDS_Edge ee[2];
- int nbE = 0;
- PShapeIteratorPtr eIt = SMESH_MesherHelper::GetAncestors( V, *_mesh, TopAbs_EDGE );
- while ( const TopoDS_Shape* E = eIt->next() )
- {
- if ( !SMESH_MesherHelper::IsSubShape( *E, F ))
- continue;
- bool isSharedEdge = false;
- for ( int j = 0; j < nbFaces && !isSharedEdge; ++j )
- {
- if ( i == j ) continue;
- const TopoDS_Shape& otherF = fId2Normal[j].first;
- isSharedEdge = SMESH_MesherHelper::IsSubShape( *E, otherF );
- }
- if ( !isSharedEdge )
- continue;
- ee[ nbE ] = TopoDS::Edge( *E );
- ee[ nbE ].Orientation( SMESH_MesherHelper::GetSubShapeOri( F, *E ));
- if ( ++nbE == 2 )
- break;
+ return ( resMinDot > wgtMinDot ) ? resNorm : wgtNorm;
+}
+
+//================================================================================
+/*!
+ * \brief Compute line of intersection of 2 planes
+ */
+//================================================================================
+
+void _OffsetPlane::ComputeIntersectionLine( _OffsetPlane& pln,
+ const TopoDS_Edge& E,
+ const TopoDS_Vertex& V )
+{
+ int iNext = bool( _faceIndexNext[0] >= 0 );
+ _faceIndexNext[ iNext ] = pln._faceIndex;
+
+ gp_XYZ n1 = _plane.Axis().Direction().XYZ();
+ gp_XYZ n2 = pln._plane.Axis().Direction().XYZ();
+
+ gp_XYZ lineDir = n1 ^ n2;
+
+ double x = Abs( lineDir.X() );
+ double y = Abs( lineDir.Y() );
+ double z = Abs( lineDir.Z() );
+
+ int cooMax; // max coordinate
+ if (x > y) {
+ if (x > z) cooMax = 1;
+ else cooMax = 3;
+ }
+ else {
+ if (y > z) cooMax = 2;
+ else cooMax = 3;
+ }
+
+ gp_Pnt linePos;
+ if ( Abs( lineDir.Coord( cooMax )) < 0.05 )
+ {
+ // parallel planes - intersection is an offset of the common EDGE
+ gp_Pnt p = BRep_Tool::Pnt( V );
+ linePos = 0.5 * (( p.XYZ() + n1 ) + ( p.XYZ() + n2 ));
+ lineDir = getEdgeDir( E, V );
+ }
+ else
+ {
+ // the constants in the 2 plane equations
+ double d1 = - ( _plane.Axis().Direction().XYZ() * _plane.Location().XYZ() );
+ double d2 = - ( pln._plane.Axis().Direction().XYZ() * pln._plane.Location().XYZ() );
+
+ switch ( cooMax ) {
+ case 1:
+ linePos.SetX( 0 );
+ linePos.SetY(( d2*n1.Z() - d1*n2.Z()) / lineDir.X() );
+ linePos.SetZ(( d1*n2.Y() - d2*n1.Y()) / lineDir.X() );
+ break;
+ case 2:
+ linePos.SetX(( d1*n2.Z() - d2*n1.Z()) / lineDir.Y() );
+ linePos.SetY( 0 );
+ linePos.SetZ(( d2*n1.X() - d1*n2.X()) / lineDir.Y() );
+ break;
+ case 3:
+ linePos.SetX(( d2*n1.Y() - d1*n2.Y()) / lineDir.Z() );
+ linePos.SetY(( d1*n2.X() - d2*n1.X()) / lineDir.Z() );
+ linePos.SetZ( 0 );
}
+ }
+ gp_Lin& line = _lines[ iNext ];
+ line.SetDirection( lineDir );
+ line.SetLocation ( linePos );
+
+ _isLineOK[ iNext ] = true;
+
+
+ iNext = bool( pln._faceIndexNext[0] >= 0 );
+ pln._lines [ iNext ] = line;
+ pln._faceIndexNext[ iNext ] = this->_faceIndex;
+ pln._isLineOK [ iNext ] = true;
+}
+
+//================================================================================
+/*!
+ * \brief Computes intersection point of two _lines
+ */
+//================================================================================
- // get an angle between the two EDGEs
- angles[i] = 0;
- if ( nbE < 1 ) continue;
- if ( nbE == 1 )
+gp_XYZ _OffsetPlane::GetCommonPoint(bool& isFound,
+ const TopoDS_Vertex & V) const
+{
+ gp_XYZ p( 0,0,0 );
+ isFound = false;
+
+ if ( NbLines() == 2 )
+ {
+ gp_Vec lPerp0 = _lines[0].Direction().XYZ() ^ _plane.Axis().Direction().XYZ();
+ double dot01 = lPerp0 * _lines[1].Direction().XYZ();
+ if ( Abs( dot01 ) > 0.05 )
{
- ee[ 1 ] == ee[ 0 ];
+ gp_Vec l0l1 = _lines[1].Location().XYZ() - _lines[0].Location().XYZ();
+ double u1 = - ( lPerp0 * l0l1 ) / dot01;
+ p = ( _lines[1].Location().XYZ() + _lines[1].Direction().XYZ() * u1 );
+ isFound = true;
}
else
{
- if ( !V.IsSame( SMESH_MesherHelper::IthVertex( 0, ee[ 1 ] )))
- std::swap( ee[0], ee[1] );
+ gp_Pnt pV ( BRep_Tool::Pnt( V ));
+ gp_Vec lv0( _lines[0].Location(), pV ), lv1(_lines[1].Location(), pV );
+ double dot0( lv0 * _lines[0].Direction() ), dot1( lv1 * _lines[1].Direction() );
+ p += 0.5 * ( _lines[0].Location().XYZ() + _lines[0].Direction().XYZ() * dot0 );
+ p += 0.5 * ( _lines[1].Location().XYZ() + _lines[1].Direction().XYZ() * dot1 );
+ isFound = true;
}
- angles[i] = SMESH_MesherHelper::GetAngle( ee[0], ee[1], F, TopoDS::Vertex( V ));
- }
-
- // compute a weighted normal
- double sumAngle = 0;
- for ( int i = 0; i < nbFaces; ++i )
- {
- angles[i] = ( angles[i] > 2*M_PI ) ? 0 : M_PI - angles[i];
- sumAngle += angles[i];
}
- for ( int i = 0; i < nbFaces; ++i )
- resNorm += angles[i] / sumAngle * fId2Normal[i].second;
- return resNorm;
+ return p;
}
//================================================================================
/*!
- * \brief Find 2 neigbor nodes of a node on EDGE
+ * \brief Find 2 neighbor nodes of a node on EDGE
*/
//================================================================================
bool _ViscousBuilder::findNeiborsOnEdge(const _LayerEdge* edge,
const SMDS_MeshNode*& n1,
const SMDS_MeshNode*& n2,
+ _EdgesOnShape& eos,
_SolidData& data)
{
const SMDS_MeshNode* node = edge->_nodes[0];
- const int shapeInd = node->getshapeId();
+ const int shapeInd = eos._shapeID;
SMESHDS_SubMesh* edgeSM = 0;
- if ( node->GetPosition()->GetTypeOfPosition() == SMDS_TOP_EDGE )
+ if ( eos.ShapeType() == TopAbs_EDGE )
{
- edgeSM = getMeshDS()->MeshElements( shapeInd );
+ edgeSM = eos._subMesh->GetSubMeshDS();
if ( !edgeSM || edgeSM->NbElements() == 0 )
return error(SMESH_Comment("Not meshed EDGE ") << shapeInd, data._index);
}
}
else
{
- TopoDS_Shape s = SMESH_MesherHelper::GetSubShapeByNode(nNeibor, getMeshDS() );
- if ( !SMESH_MesherHelper::IsSubShape( s, edge->_sWOL )) continue;
+ TopoDS_Shape s = SMESH_MesherHelper::GetSubShapeByNode( nNeibor, getMeshDS() );
+ if ( !SMESH_MesherHelper::IsSubShape( s, eos._sWOL )) continue;
}
( iN++ ? n2 : n1 ) = nNeibor;
}
//================================================================================
/*!
- * \brief Set _curvature and _2neibors->_plnNorm by 2 neigbor nodes residing the same EDGE
+ * \brief Create _Curvature
*/
//================================================================================
-void _LayerEdge::SetDataByNeighbors( const SMDS_MeshNode* n1,
- const SMDS_MeshNode* n2,
- SMESH_MesherHelper& helper)
+_Curvature* _Curvature::New( double avgNormProj, double avgDist )
{
- if ( _nodes[0]->GetPosition()->GetTypeOfPosition() != SMDS_TOP_EDGE )
- return;
+ // double _r; // radius
+ // double _k; // factor to correct node smoothed position
+ // double _h2lenRatio; // avgNormProj / (2*avgDist)
+ // gp_Pnt2d _uv; // UV used in putOnOffsetSurface()
- gp_XYZ pos = SMESH_TNodeXYZ( _nodes[0] );
- gp_XYZ vec1 = pos - SMESH_TNodeXYZ( n1 );
- gp_XYZ vec2 = pos - SMESH_TNodeXYZ( n2 );
+ _Curvature* c = 0;
+ if ( fabs( avgNormProj / avgDist ) > 1./200 )
+ {
+ c = _Factory::NewCurvature();
+ c->_r = avgDist * avgDist / avgNormProj;
+ c->_k = avgDist * avgDist / c->_r / c->_r;
+ //c->_k = avgNormProj / c->_r;
+ c->_k *= ( c->_r < 0 ? 1/1.1 : 1.1 ); // not to be too restrictive
+ c->_h2lenRatio = avgNormProj / ( avgDist + avgDist );
+
+ c->_uv.SetCoord( 0., 0. );
+ }
+ return c;
+}
+
+//================================================================================
+/*!
+ * \brief Set _curvature and _2neibors->_plnNorm by 2 neighbor nodes residing the same EDGE
+ */
+//================================================================================
+
+void _LayerEdge::SetDataByNeighbors( const SMDS_MeshNode* n1,
+ const SMDS_MeshNode* n2,
+ const _EdgesOnShape& eos,
+ SMESH_MesherHelper& helper)
+{
+ if ( eos.ShapeType() != TopAbs_EDGE )
+ return;
+ if ( _curvature && Is( SMOOTHED_C1 ))
+ return;
+
+ gp_XYZ pos = SMESH_TNodeXYZ( _nodes[0] );
+ gp_XYZ vec1 = pos - SMESH_TNodeXYZ( n1 );
+ gp_XYZ vec2 = pos - SMESH_TNodeXYZ( n2 );
// Set _curvature
_2neibors->_wgt[1] = 1 - vec2.Modulus() / sumLen;
double avgNormProj = 0.5 * ( _normal * vec1 + _normal * vec2 );
double avgLen = 0.5 * ( vec1.Modulus() + vec2.Modulus() );
- if ( _curvature ) delete _curvature;
_curvature = _Curvature::New( avgNormProj, avgLen );
// if ( _curvature )
// debugMsg( _nodes[0]->GetID()
// Set _plnNorm
- if ( _sWOL.IsNull() )
+ if ( eos._sWOL.IsNull() )
{
- TopoDS_Shape S = helper.GetSubShapeByNode( _nodes[0], helper.GetMeshDS() );
- TopoDS_Edge E = TopoDS::Edge( S );
+ TopoDS_Edge E = TopoDS::Edge( eos._shape );
// if ( SMESH_Algo::isDegenerated( E ))
// return;
gp_XYZ dirE = getEdgeDir( E, _nodes[0], helper );
//================================================================================
/*!
* \brief Copy data from a _LayerEdge of other SOLID and based on the same node;
- * this and other _LayerEdge's are inflated along a FACE or an EDGE
+ * this and the other _LayerEdge are inflated along a FACE or an EDGE
*/
//================================================================================
-gp_XYZ _LayerEdge::Copy( _LayerEdge& other, SMESH_MesherHelper& helper )
+gp_XYZ _LayerEdge::Copy( _LayerEdge& other,
+ _EdgesOnShape& eos,
+ SMESH_MesherHelper& helper )
{
_nodes = other._nodes;
_normal = other._normal;
_len = 0;
_lenFactor = other._lenFactor;
_cosin = other._cosin;
- _sWOL = other._sWOL;
_2neibors = other._2neibors;
- _curvature = 0; std::swap( _curvature, other._curvature );
- _2neibors = 0; std::swap( _2neibors, other._2neibors );
+ _curvature = other._curvature;
+ _2neibors = other._2neibors;
+ _maxLen = Precision::Infinite();//other._maxLen;
+ _flags = 0;
+ _smooFunction = 0;
gp_XYZ lastPos( 0,0,0 );
- if ( _sWOL.ShapeType() == TopAbs_EDGE )
+ if ( eos.SWOLType() == TopAbs_EDGE )
{
- double u = helper.GetNodeU( TopoDS::Edge( _sWOL ), _nodes[0] );
+ double u = helper.GetNodeU( TopoDS::Edge( eos._sWOL ), _nodes[0] );
_pos.push_back( gp_XYZ( u, 0, 0));
- u = helper.GetNodeU( TopoDS::Edge( _sWOL ), _nodes.back() );
+ u = helper.GetNodeU( TopoDS::Edge( eos._sWOL ), _nodes.back() );
lastPos.SetX( u );
}
else // TopAbs_FACE
{
- gp_XY uv = helper.GetNodeUV( TopoDS::Face( _sWOL ), _nodes[0]);
+ gp_XY uv = helper.GetNodeUV( TopoDS::Face( eos._sWOL ), _nodes[0]);
_pos.push_back( gp_XYZ( uv.X(), uv.Y(), 0));
- uv = helper.GetNodeUV( TopoDS::Face( _sWOL ), _nodes.back() );
+ uv = helper.GetNodeUV( TopoDS::Face( eos._sWOL ), _nodes.back() );
lastPos.SetX( uv.X() );
lastPos.SetY( uv.Y() );
}
{
_cosin = cosin;
cosin = Abs( _cosin );
- _lenFactor = ( /*0.1 < cosin &&*/ cosin < 1-1e-12 ) ? 1./sqrt(1-cosin*cosin) : 1.0;
+ //_lenFactor = ( cosin < 1.-1e-12 ) ? Min( 2., 1./sqrt(1-cosin*cosin )) : 1.0;
+ _lenFactor = ( cosin < 1.-1e-12 ) ? 1./sqrt(1-cosin*cosin ) : 1.0;
+}
+
+//================================================================================
+/*!
+ * \brief Check if another _LayerEdge is a neighbor on EDGE
+ */
+//================================================================================
+
+bool _LayerEdge::IsNeiborOnEdge( const _LayerEdge* edge ) const
+{
+ return (( this->_2neibors && this->_2neibors->include( edge )) ||
+ ( edge->_2neibors && edge->_2neibors->include( this )));
}
//================================================================================
const SMDS_MeshNode* nOpp = f->GetNode( SMESH_MesherHelper::WrapIndex( srcInd+2, nbNodes ));
if ( dataToCheckOri && dataToCheckOri->_reversedFaceIds.count( shapeInd ))
std::swap( nPrev, nNext );
- simplices.push_back( _Simplex( nPrev, nNext, nOpp ));
+ simplices.push_back( _Simplex( nPrev, nNext, ( nbNodes == 3 ? 0 : nOpp )));
}
if ( toSort )
{
vector<_Simplex> sortedSimplices( simplices.size() );
sortedSimplices[0] = simplices[0];
- int nbFound = 0;
+ size_t nbFound = 0;
for ( size_t i = 1; i < simplices.size(); ++i )
{
for ( size_t j = 1; j < simplices.size(); ++j )
//================================================================================
/*!
- * \brief DEBUG. Create groups contating temorary data of _LayerEdge's
+ * \brief DEBUG. Create groups containing temporary data of _LayerEdge's
*/
//================================================================================
#ifdef _DEBUG_
for ( size_t i = 0 ; i < _sdVec.size(); ++i )
{
- if ( _sdVec[i]._edges.empty() ) continue;
+ if ( _sdVec[i]._n2eMap.empty() ) continue;
dumpFunction( SMESH_Comment("make_LayerEdge_") << i );
- for ( size_t j = 0 ; j < _sdVec[i]._edges.size(); ++j )
+ TNode2Edge::iterator n2e;
+ for ( n2e = _sdVec[i]._n2eMap.begin(); n2e != _sdVec[i]._n2eMap.end(); ++n2e )
{
- _LayerEdge* le = _sdVec[i]._edges[j];
- for ( size_t iN = 1; iN < le->_nodes.size(); ++iN )
- dumpCmd(SMESH_Comment("mesh.AddEdge([ ") <<le->_nodes[iN-1]->GetID()
- << ", " << le->_nodes[iN]->GetID() <<"])");
+ _LayerEdge* le = n2e->second;
+ // for ( size_t iN = 1; iN < le->_nodes.size(); ++iN )
+ // dumpCmd(SMESH_Comment("mesh.AddEdge([ ") <<le->_nodes[iN-1]->GetID()
+ // << ", " << le->_nodes[iN]->GetID() <<"])");
+ if ( le ) {
+ dumpCmd(SMESH_Comment("mesh.AddEdge([ ") <<le->_nodes[0]->GetID()
+ << ", " << le->_nodes.back()->GetID() <<"]) # " << le->_flags );
+ }
}
dumpFunctionEnd();
dumpFunction( SMESH_Comment("makeNormals") << i );
- for ( size_t j = 0 ; j < _sdVec[i]._edges.size(); ++j )
+ for ( n2e = _sdVec[i]._n2eMap.begin(); n2e != _sdVec[i]._n2eMap.end(); ++n2e )
{
- _LayerEdge& edge = *_sdVec[i]._edges[j];
- SMESH_TNodeXYZ nXYZ( edge._nodes[0] );
- nXYZ += edge._normal * _sdVec[i]._stepSize;
- dumpCmd(SMESH_Comment("mesh.AddEdge([ ") <<edge._nodes[0]->GetID()
- << ", mesh.AddNode( " << nXYZ.X()<<","<< nXYZ.Y()<<","<< nXYZ.Z()<<")])");
+ _LayerEdge* edge = n2e->second;
+ SMESH_TNodeXYZ nXYZ( edge->_nodes[0] );
+ nXYZ += edge->_normal * _sdVec[i]._stepSize;
+ dumpCmd(SMESH_Comment("mesh.AddEdge([ ") << edge->_nodes[0]->GetID()
+ << ", mesh.AddNode( "<< nXYZ.X()<<","<< nXYZ.Y()<<","<< nXYZ.Z()<<")])");
}
dumpFunctionEnd();
TopExp_Explorer fExp( _sdVec[i]._solid, TopAbs_FACE );
for ( ; fExp.More(); fExp.Next() )
{
- if (const SMESHDS_SubMesh* sm = _sdVec[i]._proxyMesh->GetProxySubMesh( fExp.Current()))
+ if ( const SMESHDS_SubMesh* sm = _sdVec[i]._proxyMesh->GetProxySubMesh( fExp.Current() ))
{
if ( sm->NbElements() == 0 ) continue;
SMDS_ElemIteratorPtr fIt = sm->GetElements();
{
const SMDS_MeshElement* e = fIt->next();
SMESH_Comment cmd("mesh.AddFace([");
- for ( int j=0; j < e->NbCornerNodes(); ++j )
- cmd << e->GetNode(j)->GetID() << (j+1<e->NbCornerNodes() ? ",": "])");
+ for ( int j = 0; j < e->NbCornerNodes(); ++j )
+ cmd << e->GetNode(j)->GetID() << (j+1 < e->NbCornerNodes() ? ",": "])");
dumpCmd( cmd );
}
}
{
data._geomSize = Precision::Infinite();
double intersecDist;
- auto_ptr<SMESH_ElementSearcher> searcher
+ const SMDS_MeshElement* face;
+ SMESH_MesherHelper helper( *_mesh );
+
+ SMESHUtils::Deleter<SMESH_ElementSearcher> searcher
( SMESH_MeshAlgos::GetElementSearcher( *getMeshDS(),
- data._proxyMesh->GetFaces( data._solid )) );
+ data._proxyMesh->GetFaces( data._solid )));
+
+ for ( size_t iS = 0; iS < data._edgesOnShape.size(); ++iS )
+ {
+ _EdgesOnShape& eos = data._edgesOnShape[ iS ];
+ if ( eos._edges.empty() )
+ continue;
+ // get neighbor faces, intersection with which should not be considered since
+ // collisions are avoided by means of smoothing
+ set< TGeomID > neighborFaces;
+ if ( eos._hyp.ToSmooth() )
+ {
+ SMESH_subMeshIteratorPtr subIt =
+ eos._subMesh->getDependsOnIterator(/*includeSelf=*/eos.ShapeType() != TopAbs_FACE );
+ while ( subIt->more() )
+ {
+ SMESH_subMesh* sm = subIt->next();
+ PShapeIteratorPtr fIt = helper.GetAncestors( sm->GetSubShape(), *_mesh, TopAbs_FACE );
+ while ( const TopoDS_Shape* face = fIt->next() )
+ neighborFaces.insert( getMeshDS()->ShapeToIndex( *face ));
+ }
+ }
+ // find intersections
+ double thinkness = eos._hyp.GetTotalThickness();
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ {
+ if ( eos._edges[i]->Is( _LayerEdge::BLOCKED )) continue;
+ eos._edges[i]->SetMaxLen( thinkness );
+ eos._edges[i]->FindIntersection( *searcher, intersecDist, data._epsilon, eos, &face );
+ if ( intersecDist > 0 && face )
+ {
+ data._geomSize = Min( data._geomSize, intersecDist );
+ if ( !neighborFaces.count( face->getshapeId() ))
+ eos[i]->SetMaxLen( Min( thinkness, intersecDist / ( face->GetID() < 0 ? 3. : 2. )));
+ }
+ }
+ }
+
+ data._maxThickness = 0;
+ data._minThickness = 1e100;
+ list< const StdMeshers_ViscousLayers* >::iterator hyp = data._hyps.begin();
+ for ( ; hyp != data._hyps.end(); ++hyp )
+ {
+ data._maxThickness = Max( data._maxThickness, (*hyp)->GetTotalThickness() );
+ data._minThickness = Min( data._minThickness, (*hyp)->GetTotalThickness() );
+ }
+
+ // Limit inflation step size by geometry size found by intersecting
+ // normals of _LayerEdge's with mesh faces
+ if ( data._stepSize > 0.3 * data._geomSize )
+ limitStepSize( data, 0.3 * data._geomSize );
+
+ if ( data._stepSize > data._minThickness )
+ limitStepSize( data, data._minThickness );
+
+
+ // -------------------------------------------------------------------------
+ // Detect _LayerEdge which can't intersect with opposite or neighbor layer,
+ // so no need in detecting intersection at each inflation step
+ // -------------------------------------------------------------------------
- TNode2Edge::iterator n2e = data._n2eMap.begin(), n2eEnd = data._n2eMap.end();
- for ( ; n2e != n2eEnd; ++n2e )
+ int nbSteps = data._maxThickness / data._stepSize;
+ if ( nbSteps < 3 || nbSteps * data._n2eMap.size() < 100000 )
+ return;
+
+ vector< const SMDS_MeshElement* > closeFaces;
+ int nbDetected = 0;
+
+ for ( size_t iS = 0; iS < data._edgesOnShape.size(); ++iS )
{
- _LayerEdge* edge = n2e->second;
- if ( edge->IsOnEdge() ) continue;
- edge->FindIntersection( *searcher, intersecDist, data._epsilon );
- if ( data._geomSize > intersecDist && intersecDist > 0 )
- data._geomSize = intersecDist;
+ _EdgesOnShape& eos = data._edgesOnShape[ iS ];
+ if ( eos._edges.empty() || eos.ShapeType() != TopAbs_FACE )
+ continue;
+
+ for ( size_t i = 0; i < eos.size(); ++i )
+ {
+ SMESH_NodeXYZ p( eos[i]->_nodes[0] );
+ double radius = data._maxThickness + 2 * eos[i]->_maxLen;
+ closeFaces.clear();
+ searcher->GetElementsInSphere( p, radius, SMDSAbs_Face, closeFaces );
+
+ bool toIgnore = true;
+ for ( size_t iF = 0; iF < closeFaces.size() && toIgnore; ++iF )
+ if ( !( toIgnore = ( closeFaces[ iF ]->getshapeId() == eos._shapeID ||
+ data._ignoreFaceIds.count( closeFaces[ iF ]->getshapeId() ))))
+ {
+ // check if a _LayerEdge will inflate in a direction opposite to a direction
+ // toward a close face
+ bool allBehind = true;
+ for ( int iN = 0; iN < closeFaces[ iF ]->NbCornerNodes() && allBehind; ++iN )
+ {
+ SMESH_NodeXYZ pi( closeFaces[ iF ]->GetNode( iN ));
+ allBehind = (( pi - p ) * eos[i]->_normal < 0.1 * data._stepSize );
+ }
+ toIgnore = allBehind;
+ }
+
+
+ if ( toIgnore ) // no need to detect intersection
+ {
+ eos[i]->Set( _LayerEdge::INTERSECTED );
+ ++nbDetected;
+ }
+ }
}
+
+ debugMsg( "Nb LE to intersect " << data._n2eMap.size()-nbDetected << ", ignore " << nbDetected );
+
+ return;
}
//================================================================================
{
SMESH_MesherHelper helper( *_mesh );
- // Limit inflation step size by geometry size found by itersecting
- // normals of _LayerEdge's with mesh faces
- if ( data._stepSize > 0.3 * data._geomSize )
- limitStepSize( data, 0.3 * data._geomSize );
-
const double tgtThick = data._maxThickness;
- if ( data._stepSize > data._minThickness )
- limitStepSize( data, data._minThickness );
if ( data._stepSize < 1. )
data._epsilon = data._stepSize * 1e-7;
debugMsg( "-- geomSize = " << data._geomSize << ", stepSize = " << data._stepSize );
+ _pyDump->Pause();
+
+ findCollisionEdges( data, helper );
+
+ limitMaxLenByCurvature( data, helper );
+
+ _pyDump->Resume();
+
+ // limit length of _LayerEdge's around MULTI_NORMAL _LayerEdge's
+ for ( size_t i = 0; i < data._edgesOnShape.size(); ++i )
+ if ( data._edgesOnShape[i].ShapeType() == TopAbs_VERTEX &&
+ data._edgesOnShape[i]._edges.size() > 0 &&
+ data._edgesOnShape[i]._edges[0]->Is( _LayerEdge::MULTI_NORMAL ))
+ {
+ data._edgesOnShape[i]._edges[0]->Unset( _LayerEdge::BLOCKED );
+ data._edgesOnShape[i]._edges[0]->Block( data );
+ }
const double safeFactor = ( 2*data._maxThickness < data._geomSize ) ? 1 : theThickToIntersection;
double avgThick = 0, curThick = 0, distToIntersection = Precision::Infinite();
int nbSteps = 0, nbRepeats = 0;
- int iBeg, iEnd, iS;
while ( avgThick < 0.99 )
{
// new target length
+ double prevThick = curThick;
curThick += data._stepSize;
if ( curThick > tgtThick )
{
nbRepeats++;
}
+ double stepSize = curThick - prevThick;
+ updateNormalsOfSmoothed( data, helper, nbSteps, stepSize ); // to ease smoothing
+
// Elongate _LayerEdge's
dumpFunction(SMESH_Comment("inflate")<<data._index<<"_step"<<nbSteps); // debug
- for ( iBeg = 0, iS = 0; iS < data._endEdgeOnShape.size(); ++iS )
+ for ( size_t iS = 0; iS < data._edgesOnShape.size(); ++iS )
{
- const double shapeCurThick = Min( curThick, data._hypOnShape[ iS ].GetTotalThickness() );
- for ( iEnd = data._endEdgeOnShape[ iS ]; iBeg < iEnd; ++iBeg )
+ _EdgesOnShape& eos = data._edgesOnShape[iS];
+ if ( eos._edges.empty() ) continue;
+
+ const double shapeCurThick = Min( curThick, eos._hyp.GetTotalThickness() );
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
{
- data._edges[iBeg]->SetNewLength( shapeCurThick, helper );
+ eos._edges[i]->SetNewLength( shapeCurThick, eos, helper );
}
}
dumpFunctionEnd();
- if ( !updateNormals( data, helper, nbSteps ))
+ if ( !updateNormals( data, helper, nbSteps, stepSize )) // to avoid collisions
return false;
// Improve and check quality
return error("Smoothing failed", data._index);
#endif
dumpFunction(SMESH_Comment("invalidate")<<data._index<<"_step"<<nbSteps); // debug
- for ( size_t i = 0; i < data._edges.size(); ++i )
+ for ( size_t iS = 0; iS < data._edgesOnShape.size(); ++iS )
{
- data._edges[i]->InvalidateStep( nbSteps+1 );
+ _EdgesOnShape& eos = data._edgesOnShape[iS];
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ eos._edges[i]->InvalidateStep( nbSteps+1, eos );
}
dumpFunctionEnd();
}
// Evaluate achieved thickness
avgThick = 0;
- for ( iBeg = 0, iS = 0; iS < data._endEdgeOnShape.size(); ++iS )
+ int nbActiveEdges = 0;
+ for ( size_t iS = 0; iS < data._edgesOnShape.size(); ++iS )
{
- const double shapeTgtThick = data._hypOnShape[ iS ].GetTotalThickness();
- for ( iEnd = data._endEdgeOnShape[ iS ]; iBeg < iEnd; ++iBeg )
+ _EdgesOnShape& eos = data._edgesOnShape[iS];
+ if ( eos._edges.empty() ) continue;
+
+ const double shapeTgtThick = eos._hyp.GetTotalThickness();
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
{
- avgThick += Min( 1., data._edges[iBeg]->_len / shapeTgtThick );
+ if ( eos._edges[i]->_nodes.size() > 1 )
+ avgThick += Min( 1., eos._edges[i]->_len / shapeTgtThick );
+ else
+ avgThick += shapeTgtThick;
+ nbActiveEdges += ( ! eos._edges[i]->Is( _LayerEdge::BLOCKED ));
}
}
- avgThick /= data._edges.size();
+ avgThick /= data._n2eMap.size();
debugMsg( "-- Thickness " << curThick << " ("<< avgThick*100 << "%) reached" );
+#ifdef BLOCK_INFLATION
+ if ( nbActiveEdges == 0 )
+ {
+ debugMsg( "-- Stop inflation since all _LayerEdge's BLOCKED " );
+ break;
+ }
+#else
if ( distToIntersection < tgtThick * avgThick * safeFactor && avgThick < 0.9 )
{
debugMsg( "-- Stop inflation since "
<< tgtThick * avgThick << " ) * " << safeFactor );
break;
}
+#endif
+
// new step size
limitStepSize( data, 0.25 * distToIntersection );
if ( data._stepSizeNodes[0] )
} // while ( avgThick < 0.99 )
- if (nbSteps == 0 )
+ if ( nbSteps == 0 )
return error("failed at the very first inflation step", data._index);
if ( avgThick < 0.99 )
}
}
- // Restore position of src nodes moved by infaltion on _noShrinkShapes
+ // Restore position of src nodes moved by inflation on _noShrinkShapes
dumpFunction(SMESH_Comment("restoNoShrink_So")<<data._index); // debug
- for ( iEnd = iS = 0; iS < data._endEdgeOnShape.size(); ++iS )
+ for ( size_t iS = 0; iS < data._edgesOnShape.size(); ++iS )
{
- iBeg = iEnd;
- iEnd = data._endEdgeOnShape[ iS ];
- if ( data._edges[ iBeg ]->_nodes.size() == 1 )
- for ( ; iBeg < iEnd; ++iBeg )
+ _EdgesOnShape& eos = data._edgesOnShape[iS];
+ if ( !eos._edges.empty() && eos._edges[0]->_nodes.size() == 1 )
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
{
- restoreNoShrink( *data._edges[ iBeg ] );
+ restoreNoShrink( *eos._edges[ i ] );
}
}
dumpFunctionEnd();
- return true;
+ return safeFactor > 0; // == true (avoid warning: unused variable 'safeFactor')
}
//================================================================================
//================================================================================
bool _ViscousBuilder::smoothAndCheck(_SolidData& data,
- const int nbSteps,
+ const int infStep,
double & distToIntersection)
{
if ( data._nbShapesToSmooth == 0 )
return true; // no shapes needing smoothing
bool moved, improved;
+ double vol;
+ vector< _LayerEdge* > movedEdges, badEdges;
+ vector< _EdgesOnShape* > eosC1; // C1 continues shapes
+ vector< bool > isConcaveFace;
SMESH_MesherHelper helper(*_mesh);
- Handle(Geom_Surface) surface;
+ Handle(ShapeAnalysis_Surface) surface;
TopoDS_Face F;
- int iBeg, iEnd = 0;
- for ( int iS = 0; iS < data._nbShapesToSmooth; ++iS )
+ for ( int isFace = 0; isFace < 2; ++isFace ) // smooth on [ EDGEs, FACEs ]
{
- iBeg = iEnd;
- iEnd = data._endEdgeOnShape[ iS ];
-
- // need to smooth this shape?
- bool toSmooth = ( data._hyps.front() == data._hyps.back() );
- for ( int i = iBeg; i < iEnd && !toSmooth; ++i )
- toSmooth = ( data._edges[ iBeg ]->NbSteps() >= nbSteps+1 );
- if ( !toSmooth )
- {
- if ( iS+1 == data._nbShapesToSmooth )
- data._nbShapesToSmooth--;
- continue; // target length reached some steps before
- }
+ const TopAbs_ShapeEnum shapeType = isFace ? TopAbs_FACE : TopAbs_EDGE;
- // prepare data
- if ( !data._edges[ iBeg ]->_sWOL.IsNull() &&
- data._edges[ iBeg ]->_sWOL.ShapeType() == TopAbs_FACE )
- {
- if ( !F.IsSame( data._edges[ iBeg ]->_sWOL )) {
- F = TopoDS::Face( data._edges[ iBeg ]->_sWOL );
- helper.SetSubShape( F );
- surface = BRep_Tool::Surface( F );
- }
- }
- else
+ for ( size_t iS = 0; iS < data._edgesOnShape.size(); ++iS )
{
- F.Nullify(); surface.Nullify();
- }
- const TGeomID sInd = data._edges[ iBeg ]->_nodes[0]->getshapeId();
+ _EdgesOnShape& eos = data._edgesOnShape[ iS ];
+ if ( !eos._toSmooth ||
+ eos.ShapeType() != shapeType ||
+ eos._edges.empty() )
+ continue;
- // perform smoothing
+ // already smoothed?
+ // bool toSmooth = ( eos._edges[ 0 ]->NbSteps() >= infStep+1 );
+ // if ( !toSmooth ) continue;
- if ( data._edges[ iBeg ]->IsOnEdge() )
- {
- dumpFunction(SMESH_Comment("smooth")<<data._index << "_Ed"<<sInd <<"_InfStep"<<nbSteps);
+ if ( !eos._hyp.ToSmooth() )
+ {
+ // smooth disabled by the user; check validy only
+ if ( !isFace ) continue;
+ badEdges.clear();
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ {
+ _LayerEdge* edge = eos._edges[i];
+ for ( size_t iF = 0; iF < edge->_simplices.size(); ++iF )
+ if ( !edge->_simplices[iF].IsForward( edge->_nodes[0], edge->_pos.back(), vol ))
+ {
+ // debugMsg( "-- Stop inflation. Bad simplex ("
+ // << " "<< edge->_nodes[0]->GetID()
+ // << " "<< edge->_nodes.back()->GetID()
+ // << " "<< edge->_simplices[iF]._nPrev->GetID()
+ // << " "<< edge->_simplices[iF]._nNext->GetID() << " ) ");
+ // return false;
+ badEdges.push_back( edge );
+ }
+ }
+ if ( !badEdges.empty() )
+ {
+ eosC1.resize(1);
+ eosC1[0] = &eos;
+ int nbBad = invalidateBadSmooth( data, helper, badEdges, eosC1, infStep );
+ if ( nbBad > 0 )
+ return false;
+ }
+ continue; // goto the next EDGE or FACE
+ }
- // try a simple solution on an analytic EDGE
- if ( !smoothAnalyticEdge( data, iBeg, iEnd, surface, F, helper ))
+ // prepare data
+ if ( eos.SWOLType() == TopAbs_FACE )
{
- // smooth on EDGE's
- int step = 0;
- do {
- moved = false;
- for ( int i = iBeg; i < iEnd; ++i )
- {
- moved |= data._edges[i]->SmoothOnEdge(surface, F, helper);
- }
- dumpCmd( SMESH_Comment("# end step ")<<step);
+ if ( !F.IsSame( eos._sWOL )) {
+ F = TopoDS::Face( eos._sWOL );
+ helper.SetSubShape( F );
+ surface = helper.GetSurface( F );
}
- while ( moved && step++ < 5 );
}
- dumpFunctionEnd();
- }
- else
- {
- // smooth on FACE's
+ else
+ {
+ F.Nullify(); surface.Nullify();
+ }
+ const TGeomID sInd = eos._shapeID;
- const bool isConcaveFace = data._concaveFaces.count( sInd );
+ // perform smoothing
- int step = 0, stepLimit = 5, badNb = 0; moved = true;
- while (( ++step <= stepLimit && moved ) || improved )
+ if ( eos.ShapeType() == TopAbs_EDGE )
{
- dumpFunction(SMESH_Comment("smooth")<<data._index<<"_Fa"<<sInd
- <<"_InfStep"<<nbSteps<<"_"<<step); // debug
- int oldBadNb = badNb;
- badNb = 0;
- moved = false;
- if ( step % 2 )
- for ( int i = iBeg; i < iEnd; ++i ) // iterate forward
- moved |= data._edges[i]->Smooth( badNb, step, isConcaveFace );
- else
- for ( int i = iEnd-1; i >= iBeg; --i ) // iterate backward
- moved |= data._edges[i]->Smooth( badNb, step, isConcaveFace );
- improved = ( badNb < oldBadNb );
-
- // issue 22576 -- no bad faces but still there are intersections to fix
- // if ( improved && badNb == 0 )
- // stepLimit = step + 3;
+ dumpFunction(SMESH_Comment("smooth")<<data._index << "_Ed"<<sInd <<"_InfStep"<<infStep);
+ if ( !eos._edgeSmoother->Perform( data, surface, F, helper ))
+ {
+ // smooth on EDGE's (normally we should not get here)
+ int step = 0;
+ do {
+ moved = false;
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ {
+ moved |= eos._edges[i]->SmoothOnEdge( surface, F, helper );
+ }
+ dumpCmd( SMESH_Comment("# end step ")<<step);
+ }
+ while ( moved && step++ < 5 );
+ }
dumpFunctionEnd();
}
- if ( badNb > 0 )
+
+ else // smooth on FACE
{
-#ifdef __myDEBUG
- double vol = 0;
- for ( int i = iBeg; i < iEnd; ++i )
+ eosC1.clear();
+ eosC1.push_back( & eos );
+ eosC1.insert( eosC1.end(), eos._eosC1.begin(), eos._eosC1.end() );
+
+ movedEdges.clear();
+ isConcaveFace.resize( eosC1.size() );
+ for ( size_t iEOS = 0; iEOS < eosC1.size(); ++iEOS )
+ {
+ isConcaveFace[ iEOS ] = data._concaveFaces.count( eosC1[ iEOS ]->_shapeID );
+ vector< _LayerEdge* > & edges = eosC1[ iEOS ]->_edges;
+ for ( size_t i = 0; i < edges.size(); ++i )
+ if ( edges[i]->Is( _LayerEdge::MOVED ) ||
+ edges[i]->Is( _LayerEdge::NEAR_BOUNDARY ))
+ movedEdges.push_back( edges[i] );
+
+ makeOffsetSurface( *eosC1[ iEOS ], helper );
+ }
+
+ int step = 0, stepLimit = 5, nbBad = 0;
+ while (( ++step <= stepLimit ) || improved )
{
- _LayerEdge* edge = data._edges[i];
- SMESH_TNodeXYZ tgtXYZ( edge->_nodes.back() );
- for ( size_t j = 0; j < edge->_simplices.size(); ++j )
- if ( !edge->_simplices[j].IsForward( edge->_nodes[0], &tgtXYZ, vol ))
+ dumpFunction(SMESH_Comment("smooth")<<data._index<<"_Fa"<<sInd
+ <<"_InfStep"<<infStep<<"_"<<step); // debug
+ int oldBadNb = nbBad;
+ badEdges.clear();
+
+#ifdef INCREMENTAL_SMOOTH
+ bool findBest = false; // ( step == stepLimit );
+ for ( size_t i = 0; i < movedEdges.size(); ++i )
+ {
+ movedEdges[i]->Unset( _LayerEdge::SMOOTHED );
+ if ( movedEdges[i]->Smooth( step, findBest, movedEdges ) > 0 )
+ badEdges.push_back( movedEdges[i] );
+ }
+#else
+ bool findBest = ( step == stepLimit || isConcaveFace[ iEOS ]);
+ for ( size_t iEOS = 0; iEOS < eosC1.size(); ++iEOS )
+ {
+ vector< _LayerEdge* > & edges = eosC1[ iEOS ]->_edges;
+ for ( size_t i = 0; i < edges.size(); ++i )
{
- cout << "Bad simplex ( " << edge->_nodes[0]->GetID()<< " "<< tgtXYZ._node->GetID()
- << " "<< edge->_simplices[j]._nPrev->GetID()
- << " "<< edge->_simplices[j]._nNext->GetID() << " )" << endl;
- return false;
+ edges[i]->Unset( _LayerEdge::SMOOTHED );
+ if ( edges[i]->Smooth( step, findBest, false ) > 0 )
+ badEdges.push_back( eos._edges[i] );
}
- }
+ }
#endif
- return false;
- }
- }
- } // loop on shapes to smooth
+ nbBad = badEdges.size();
- // Check orientation of simplices of _ConvexFace::_simplexTestEdges
- map< TGeomID, _ConvexFace >::iterator id2face = data._convexFaces.begin();
- for ( ; id2face != data._convexFaces.end(); ++id2face )
+ if ( nbBad > 0 )
+ debugMsg(SMESH_Comment("nbBad = ") << nbBad );
+
+ if ( !badEdges.empty() && step >= stepLimit / 2 )
+ {
+ if ( badEdges[0]->Is( _LayerEdge::ON_CONCAVE_FACE ))
+ stepLimit = 9;
+
+ // resolve hard smoothing situation around concave VERTEXes
+ for ( size_t iEOS = 0; iEOS < eosC1.size(); ++iEOS )
+ {
+ vector< _EdgesOnShape* > & eosCoVe = eosC1[ iEOS ]->_eosConcaVer;
+ for ( size_t i = 0; i < eosCoVe.size(); ++i )
+ eosCoVe[i]->_edges[0]->MoveNearConcaVer( eosCoVe[i], eosC1[ iEOS ],
+ step, badEdges );
+ }
+ // look for the best smooth of _LayerEdge's neighboring badEdges
+ nbBad = 0;
+ for ( size_t i = 0; i < badEdges.size(); ++i )
+ {
+ _LayerEdge* ledge = badEdges[i];
+ for ( size_t iN = 0; iN < ledge->_neibors.size(); ++iN )
+ {
+ ledge->_neibors[iN]->Unset( _LayerEdge::SMOOTHED );
+ nbBad += ledge->_neibors[iN]->Smooth( step, true, /*findBest=*/true );
+ }
+ ledge->Unset( _LayerEdge::SMOOTHED );
+ nbBad += ledge->Smooth( step, true, /*findBest=*/true );
+ }
+ debugMsg(SMESH_Comment("nbBad = ") << nbBad );
+ }
+
+ if ( nbBad == oldBadNb &&
+ nbBad > 0 &&
+ step < stepLimit ) // smooth w/o check of validity
+ {
+ dumpFunctionEnd();
+ dumpFunction(SMESH_Comment("smoothWoCheck")<<data._index<<"_Fa"<<sInd
+ <<"_InfStep"<<infStep<<"_"<<step); // debug
+ for ( size_t i = 0; i < movedEdges.size(); ++i )
+ {
+ movedEdges[i]->SmoothWoCheck();
+ }
+ if ( stepLimit < 9 )
+ stepLimit++;
+ }
+
+ improved = ( nbBad < oldBadNb );
+
+ dumpFunctionEnd();
+
+ if (( step % 3 == 1 ) || ( nbBad > 0 && step >= stepLimit / 2 ))
+ for ( size_t iEOS = 0; iEOS < eosC1.size(); ++iEOS )
+ {
+ putOnOffsetSurface( *eosC1[ iEOS ], infStep, eosC1, step, /*moveAll=*/step == 1 );
+ }
+
+ } // smoothing steps
+
+ // project -- to prevent intersections or fix bad simplices
+ for ( size_t iEOS = 0; iEOS < eosC1.size(); ++iEOS )
+ {
+ if ( ! eosC1[ iEOS ]->_eosConcaVer.empty() || nbBad > 0 )
+ putOnOffsetSurface( *eosC1[ iEOS ], infStep, eosC1 );
+ }
+
+ //if ( !badEdges.empty() )
+ {
+ badEdges.clear();
+ for ( size_t iEOS = 0; iEOS < eosC1.size(); ++iEOS )
+ {
+ for ( size_t i = 0; i < eosC1[ iEOS ]->_edges.size(); ++i )
+ {
+ if ( !eosC1[ iEOS ]->_sWOL.IsNull() ) continue;
+
+ _LayerEdge* edge = eosC1[ iEOS ]->_edges[i];
+ edge->CheckNeiborsOnBoundary( & badEdges );
+ if (( nbBad > 0 ) ||
+ ( edge->Is( _LayerEdge::BLOCKED ) && edge->Is( _LayerEdge::NEAR_BOUNDARY )))
+ {
+ SMESH_TNodeXYZ tgtXYZ = edge->_nodes.back();
+ gp_XYZ prevXYZ = edge->PrevCheckPos();
+ for ( size_t j = 0; j < edge->_simplices.size(); ++j )
+ if ( !edge->_simplices[j].IsForward( &prevXYZ, &tgtXYZ, vol ))
+ {
+ debugMsg("Bad simplex ( " << edge->_nodes[0]->GetID()
+ << " "<< tgtXYZ._node->GetID()
+ << " "<< edge->_simplices[j]._nPrev->GetID()
+ << " "<< edge->_simplices[j]._nNext->GetID() << " )" );
+ badEdges.push_back( edge );
+ break;
+ }
+ }
+ }
+ }
+
+ // try to fix bad simplices by removing the last inflation step of some _LayerEdge's
+ nbBad = invalidateBadSmooth( data, helper, badEdges, eosC1, infStep );
+
+ if ( nbBad > 0 )
+ return false;
+ }
+
+ } // // smooth on FACE's
+ } // loop on shapes
+ } // smooth on [ EDGEs, FACEs ]
+
+ // Check orientation of simplices of _LayerEdge's on EDGEs and VERTEXes
+ eosC1.resize(1);
+ for ( size_t iS = 0; iS < data._edgesOnShape.size(); ++iS )
{
- _ConvexFace & convFace = (*id2face).second;
- if ( !convFace._simplexTestEdges.empty() &&
- convFace._simplexTestEdges[0]->_nodes[0]->GetPosition()->GetDim() == 2 )
- continue; // _simplexTestEdges are based on FACE -- already checked while smoothing
+ _EdgesOnShape& eos = data._edgesOnShape[ iS ];
+ if ( eos.ShapeType() == TopAbs_FACE ||
+ eos._edges.empty() ||
+ !eos._sWOL.IsNull() )
+ continue;
+
+ badEdges.clear();
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ {
+ _LayerEdge* edge = eos._edges[i];
+ if ( edge->_nodes.size() < 2 ) continue;
+ SMESH_TNodeXYZ tgtXYZ = edge->_nodes.back();
+ //SMESH_TNodeXYZ prevXYZ = edge->_nodes[0];
+ gp_XYZ prevXYZ = edge->PrevCheckPos( &eos );
+ //const gp_XYZ& prevXYZ = edge->PrevPos();
+ for ( size_t j = 0; j < edge->_simplices.size(); ++j )
+ if ( !edge->_simplices[j].IsForward( &prevXYZ, &tgtXYZ, vol ))
+ {
+ debugMsg("Bad simplex on bnd ( " << edge->_nodes[0]->GetID()
+ << " "<< tgtXYZ._node->GetID()
+ << " "<< edge->_simplices[j]._nPrev->GetID()
+ << " "<< edge->_simplices[j]._nNext->GetID() << " )" );
+ badEdges.push_back( edge );
+ break;
+ }
+ }
- if ( !convFace.CheckPrisms() )
+ // try to fix bad simplices by removing the last inflation step of some _LayerEdge's
+ eosC1[0] = &eos;
+ int nbBad = invalidateBadSmooth( data, helper, badEdges, eosC1, infStep );
+ if ( nbBad > 0 )
return false;
}
+
// Check if the last segments of _LayerEdge intersects 2D elements;
// checked elements are either temporary faces or faces on surfaces w/o the layers
- auto_ptr<SMESH_ElementSearcher> searcher
+ SMESHUtils::Deleter<SMESH_ElementSearcher> searcher
( SMESH_MeshAlgos::GetElementSearcher( *getMeshDS(),
data._proxyMesh->GetFaces( data._solid )) );
+#ifdef BLOCK_INFLATION
+ const bool toBlockInfaltion = true;
+#else
+ const bool toBlockInfaltion = false;
+#endif
distToIntersection = Precision::Infinite();
double dist;
const SMDS_MeshElement* intFace = 0;
const SMDS_MeshElement* closestFace = 0;
- int iLE = 0;
- for ( size_t i = 0; i < data._edges.size(); ++i )
+ _LayerEdge* le = 0;
+ bool is1stBlocked = true; // dbg
+ for ( size_t iS = 0; iS < data._edgesOnShape.size(); ++iS )
{
- if ( !data._edges[i]->_sWOL.IsNull() )
+ _EdgesOnShape& eos = data._edgesOnShape[ iS ];
+ if ( eos._edges.empty() || !eos._sWOL.IsNull() )
continue;
- if ( data._edges[i]->FindIntersection( *searcher, dist, data._epsilon, &intFace ))
- return false;
- if ( distToIntersection > dist )
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
{
- // ignore intersection of a _LayerEdge based on a _ConvexFace with a face
- // lying on this _ConvexFace
- if ( _ConvexFace* convFace = data.GetConvexFace( intFace->getshapeId() ))
- if ( convFace->_subIdToEdgeEnd.count ( data._edges[i]->_nodes[0]->getshapeId() ))
- continue;
-
- // ignore intersection of a _LayerEdge based on a FACE with an element on this FACE
- // ( avoid limiting the thickness on the case of issue 22576)
- if ( intFace->getshapeId() == data._edges[i]->_nodes[0]->getshapeId() )
+ if ( eos._edges[i]->Is( _LayerEdge::INTERSECTED ) ||
+ eos._edges[i]->Is( _LayerEdge::MULTI_NORMAL ))
continue;
-
- distToIntersection = dist;
- iLE = i;
- closestFace = intFace;
- }
- }
-#ifdef __myDEBUG
- if ( closestFace )
- {
- SMDS_MeshElement::iterator nIt = closestFace->begin_nodes();
- cout << "Shortest distance: _LayerEdge nodes: tgt " << data._edges[iLE]->_nodes.back()->GetID()
- << " src " << data._edges[iLE]->_nodes[0]->GetID()<< ", intersection with face ("
- << (*nIt++)->GetID()<<" "<< (*nIt++)->GetID()<<" "<< (*nIt++)->GetID()
- << ") distance = " << distToIntersection<< endl;
- }
-#endif
-
- return true;
-}
-
-//================================================================================
-/*!
- * \brief Return a curve of the EDGE to be used for smoothing and arrange
- * _LayerEdge's to be in a consequent order
- */
-//================================================================================
-
-Handle(Geom_Curve) _SolidData::CurveForSmooth( const TopoDS_Edge& E,
- const int iFrom,
- const int iTo,
- const TopoDS_Face& F,
- SMESH_MesherHelper& helper,
- vector<_LayerEdge* >* edges)
-{
- TGeomID eIndex = helper.GetMeshDS()->ShapeToIndex( E );
-
- map< TGeomID, Handle(Geom_Curve)>::iterator i2curve = _edge2curve.find( eIndex );
-
- if ( i2curve == _edge2curve.end() )
- {
- if ( edges )
- _edges.swap( *edges );
-
- // sort _LayerEdge's by position on the EDGE
- SortOnEdge( E, iFrom, iTo, helper );
-
- SMESHDS_SubMesh* smDS = helper.GetMeshDS()->MeshElements( eIndex );
-
- TopLoc_Location loc; double f,l;
-
- Handle(Geom_Line) line;
- Handle(Geom_Circle) circle;
- bool isLine, isCirc;
- if ( F.IsNull() ) // 3D case
- {
- // check if the EDGE is a line
- Handle(Geom_Curve) curve = BRep_Tool::Curve( E, loc, f, l);
- if ( curve->IsKind( STANDARD_TYPE( Geom_TrimmedCurve )))
- curve = Handle(Geom_TrimmedCurve)::DownCast( curve )->BasisCurve();
-
- line = Handle(Geom_Line)::DownCast( curve );
- circle = Handle(Geom_Circle)::DownCast( curve );
- isLine = (!line.IsNull());
- isCirc = (!circle.IsNull());
-
- if ( !isLine && !isCirc ) // Check if the EDGE is close to a line
+ if ( eos._edges[i]->FindIntersection( *searcher, dist, data._epsilon, eos, &intFace ))
{
- Bnd_B3d bndBox;
- SMDS_NodeIteratorPtr nIt = smDS->GetNodes();
- while ( nIt->more() )
- bndBox.Add( SMESH_TNodeXYZ( nIt->next() ));
- gp_XYZ size = bndBox.CornerMax() - bndBox.CornerMin();
-
- gp_Pnt p0, p1;
- if ( iTo-iFrom > 1 ) {
- p0 = SMESH_TNodeXYZ( _edges[iFrom]->_nodes[0] );
- p1 = SMESH_TNodeXYZ( _edges[iFrom+1]->_nodes[0] );
- }
- else {
- p0 = curve->Value( f );
- p1 = curve->Value( l );
- }
- const double lineTol = 1e-2 * p0.Distance( p1 );
- for ( int i = 0; i < 3 && !isLine; ++i )
- isLine = ( size.Coord( i+1 ) <= lineTol );
-
- if ( isLine )
- line = new Geom_Line( gp::OX() ); // only type does matter
+ return false;
+ // commented due to "Illegal hash-positionPosition" error in NETGEN
+ // on Debian60 on viscous_layers_01/B2 case
+ // Collision; try to deflate _LayerEdge's causing it
+ // badEdges.clear();
+ // badEdges.push_back( eos._edges[i] );
+ // eosC1[0] = & eos;
+ // int nbBad = invalidateBadSmooth( data, helper, badEdges, eosC1, infStep );
+ // if ( nbBad > 0 )
+ // return false;
+
+ // badEdges.clear();
+ // if ( _EdgesOnShape* eof = data.GetShapeEdges( intFace->getshapeId() ))
+ // {
+ // if ( const _TmpMeshFace* f = dynamic_cast< const _TmpMeshFace*>( intFace ))
+ // {
+ // const SMDS_MeshElement* srcFace =
+ // eof->_subMesh->GetSubMeshDS()->GetElement( f->getIdInShape() );
+ // SMDS_ElemIteratorPtr nIt = srcFace->nodesIterator();
+ // while ( nIt->more() )
+ // {
+ // const SMDS_MeshNode* srcNode = static_cast<const SMDS_MeshNode*>( nIt->next() );
+ // TNode2Edge::iterator n2e = data._n2eMap.find( srcNode );
+ // if ( n2e != data._n2eMap.end() )
+ // badEdges.push_back( n2e->second );
+ // }
+ // eosC1[0] = eof;
+ // nbBad = invalidateBadSmooth( data, helper, badEdges, eosC1, infStep );
+ // if ( nbBad > 0 )
+ // return false;
+ // }
+ // }
+ // if ( eos._edges[i]->FindIntersection( *searcher, dist, data._epsilon, eos, &intFace ))
+ // return false;
+ // else
+ // continue;
}
- if ( !isLine && !isCirc && iTo-iFrom > 2) // Check if the EDGE is close to a circle
+ if ( !intFace )
{
- // TODO
+ SMESH_Comment msg("Invalid? normal at node "); msg << eos._edges[i]->_nodes[0]->GetID();
+ debugMsg( msg );
+ continue;
}
- }
- else // 2D case
- {
- // check if the EDGE is a line
- Handle(Geom2d_Curve) curve = BRep_Tool::CurveOnSurface( E, F, f, l);
- if ( curve->IsKind( STANDARD_TYPE( Geom2d_TrimmedCurve )))
- curve = Handle(Geom2d_TrimmedCurve)::DownCast( curve )->BasisCurve();
- Handle(Geom2d_Line) line2d = Handle(Geom2d_Line)::DownCast( curve );
- Handle(Geom2d_Circle) circle2d = Handle(Geom2d_Circle)::DownCast( curve );
- isLine = (!line2d.IsNull());
- isCirc = (!circle2d.IsNull());
-
- if ( !isLine && !isCirc) // Check if the EDGE is close to a line
+ const bool isShorterDist = ( distToIntersection > dist );
+ if ( toBlockInfaltion || isShorterDist )
{
- Bnd_B2d bndBox;
- SMDS_NodeIteratorPtr nIt = smDS->GetNodes();
- while ( nIt->more() )
- bndBox.Add( helper.GetNodeUV( F, nIt->next() ));
- gp_XY size = bndBox.CornerMax() - bndBox.CornerMin();
+ // ignore intersection of a _LayerEdge based on a _ConvexFace with a face
+ // lying on this _ConvexFace
+ if ( _ConvexFace* convFace = data.GetConvexFace( intFace->getshapeId() ))
+ if ( convFace->_isTooCurved && convFace->_subIdToEOS.count ( eos._shapeID ))
+ continue;
- const double lineTol = 1e-2 * sqrt( bndBox.SquareExtent() );
- for ( int i = 0; i < 2 && !isLine; ++i )
- isLine = ( size.Coord( i+1 ) <= lineTol );
- }
- if ( !isLine && !isCirc && iTo-iFrom > 2) // Check if the EDGE is close to a circle
- {
- // TODO
- }
- if ( isLine )
- {
- line = new Geom_Line( gp::OX() ); // only type does matter
- }
- else if ( isCirc )
- {
- gp_Pnt2d p = circle2d->Location();
- gp_Ax2 ax( gp_Pnt( p.X(), p.Y(), 0), gp::DX());
- circle = new Geom_Circle( ax, 1.); // only center position does matter
- }
- }
+ // ignore intersection of a _LayerEdge based on a FACE with an element on this FACE
+ // ( avoid limiting the thickness on the case of issue 22576)
+ if ( intFace->getshapeId() == eos._shapeID )
+ continue;
- if ( edges )
- _edges.swap( *edges );
+ // ignore intersection with intFace of an adjacent FACE
+ if ( dist > 0.1 * eos._edges[i]->_len )
+ {
+ bool toIgnore = false;
+ if ( eos._toSmooth )
+ {
+ const TopoDS_Shape& S = getMeshDS()->IndexToShape( intFace->getshapeId() );
+ if ( !S.IsNull() && S.ShapeType() == TopAbs_FACE )
+ {
+ TopExp_Explorer sub( eos._shape,
+ eos.ShapeType() == TopAbs_FACE ? TopAbs_EDGE : TopAbs_VERTEX );
+ for ( ; !toIgnore && sub.More(); sub.Next() )
+ // is adjacent - has a common EDGE or VERTEX
+ toIgnore = ( helper.IsSubShape( sub.Current(), S ));
- Handle(Geom_Curve)& res = _edge2curve[ eIndex ];
- if ( isLine )
- res = line;
- else if ( isCirc )
- res = circle;
+ if ( toIgnore ) // check angle between normals
+ {
+ gp_XYZ normal;
+ if ( SMESH_MeshAlgos::FaceNormal( intFace, normal, /*normalized=*/true ))
+ toIgnore = ( normal * eos._edges[i]->_normal > -0.5 );
+ }
+ }
+ }
+ if ( !toIgnore ) // check if the edge is a neighbor of intFace
+ {
+ for ( size_t iN = 0; !toIgnore && iN < eos._edges[i]->_neibors.size(); ++iN )
+ {
+ int nInd = intFace->GetNodeIndex( eos._edges[i]->_neibors[ iN ]->_nodes.back() );
+ toIgnore = ( nInd >= 0 );
+ }
+ }
+ if ( toIgnore )
+ continue;
+ }
+
+ // intersection not ignored
+
+ if ( toBlockInfaltion &&
+ dist < ( eos._edges[i]->_len * theThickToIntersection ))
+ {
+ if ( is1stBlocked ) { is1stBlocked = false; // debug
+ dumpFunction(SMESH_Comment("blockIntersected") <<data._index<<"_InfStep"<<infStep);
+ }
+ eos._edges[i]->Set( _LayerEdge::INTERSECTED ); // not to intersect
+ eos._edges[i]->Block( data ); // not to inflate
+
+ //if ( _EdgesOnShape* eof = data.GetShapeEdges( intFace->getshapeId() ))
+ {
+ // block _LayerEdge's, on top of which intFace is
+ if ( const _TmpMeshFace* f = dynamic_cast< const _TmpMeshFace*>( intFace ))
+ {
+ const SMDS_MeshElement* srcFace = f->_srcFace;
+ SMDS_ElemIteratorPtr nIt = srcFace->nodesIterator();
+ while ( nIt->more() )
+ {
+ const SMDS_MeshNode* srcNode = static_cast<const SMDS_MeshNode*>( nIt->next() );
+ TNode2Edge::iterator n2e = data._n2eMap.find( srcNode );
+ if ( n2e != data._n2eMap.end() )
+ n2e->second->Block( data );
+ }
+ }
+ }
+ }
+
+ if ( isShorterDist )
+ {
+ distToIntersection = dist;
+ le = eos._edges[i];
+ closestFace = intFace;
+ }
+
+ } // if ( toBlockInfaltion || isShorterDist )
+ } // loop on eos._edges
+ } // loop on data._edgesOnShape
- return res;
+ if ( !is1stBlocked )
+ {
+ dumpFunctionEnd();
+ }
+
+ if ( closestFace && le )
+ {
+#ifdef __myDEBUG
+ SMDS_MeshElement::iterator nIt = closestFace->begin_nodes();
+ cout << "#Shortest distance: _LayerEdge nodes: tgt " << le->_nodes.back()->GetID()
+ << " src " << le->_nodes[0]->GetID()<< ", intersection with face ("
+ << (*nIt++)->GetID()<<" "<< (*nIt++)->GetID()<<" "<< (*nIt++)->GetID()
+ << ") distance = " << distToIntersection<< endl;
+#endif
}
- return i2curve->second;
+
+ return true;
}
//================================================================================
/*!
- * \brief Sort _LayerEdge's by a parameter on a given EDGE
+ * \brief try to fix bad simplices by removing the last inflation step of some _LayerEdge's
+ * \param [in,out] badSmooEdges - _LayerEdge's to fix
+ * \return int - resulting nb of bad _LayerEdge's
*/
//================================================================================
-void _SolidData::SortOnEdge( const TopoDS_Edge& E,
- const int iFrom,
- const int iTo,
- SMESH_MesherHelper& helper)
+int _ViscousBuilder::invalidateBadSmooth( _SolidData& data,
+ SMESH_MesherHelper& helper,
+ vector< _LayerEdge* >& badSmooEdges,
+ vector< _EdgesOnShape* >& eosC1,
+ const int infStep )
{
- map< double, _LayerEdge* > u2edge;
- for ( int i = iFrom; i < iTo; ++i )
- u2edge.insert( make_pair( helper.GetNodeU( E, _edges[i]->_nodes[0] ), _edges[i] ));
+ if ( badSmooEdges.empty() || infStep == 0 ) return 0;
- ASSERT( u2edge.size() == iTo - iFrom );
- map< double, _LayerEdge* >::iterator u2e = u2edge.begin();
- for ( int i = iFrom; i < iTo; ++i, ++u2e )
- _edges[i] = u2e->second;
+ dumpFunction(SMESH_Comment("invalidateBadSmooth")<<"_S"<<eosC1[0]->_shapeID<<"_InfStep"<<infStep);
+
+ enum {
+ INVALIDATED = _LayerEdge::UNUSED_FLAG,
+ TO_INVALIDATE = _LayerEdge::UNUSED_FLAG * 2,
+ ADDED = _LayerEdge::UNUSED_FLAG * 4
+ };
+ data.UnmarkEdges( TO_INVALIDATE & INVALIDATED & ADDED );
+
+ double vol;
+ bool haveInvalidated = true;
+ while ( haveInvalidated )
+ {
+ haveInvalidated = false;
+ for ( size_t i = 0; i < badSmooEdges.size(); ++i )
+ {
+ _LayerEdge* edge = badSmooEdges[i];
+ _EdgesOnShape* eos = data.GetShapeEdges( edge );
+ edge->Set( ADDED );
+ bool invalidated = false;
+ if ( edge->Is( TO_INVALIDATE ) && edge->NbSteps() > 1 )
+ {
+ edge->InvalidateStep( edge->NbSteps(), *eos, /*restoreLength=*/true );
+ edge->Block( data );
+ edge->Set( INVALIDATED );
+ edge->Unset( TO_INVALIDATE );
+ invalidated = true;
+ haveInvalidated = true;
+ }
+
+ // look for _LayerEdge's of bad _simplices
+ int nbBad = 0;
+ SMESH_TNodeXYZ tgtXYZ = edge->_nodes.back();
+ gp_XYZ prevXYZ1 = edge->PrevCheckPos( eos );
+ //const gp_XYZ& prevXYZ2 = edge->PrevPos();
+ for ( size_t j = 0; j < edge->_simplices.size(); ++j )
+ {
+ if (( edge->_simplices[j].IsForward( &prevXYZ1, &tgtXYZ, vol ))/* &&
+ ( &prevXYZ1 == &prevXYZ2 || edge->_simplices[j].IsForward( &prevXYZ2, &tgtXYZ, vol ))*/)
+ continue;
+
+ bool isBad = true;
+ _LayerEdge* ee[2] = { 0,0 };
+ for ( size_t iN = 0; iN < edge->_neibors.size() && !ee[1] ; ++iN )
+ if ( edge->_simplices[j].Includes( edge->_neibors[iN]->_nodes.back() ))
+ ee[ ee[0] != 0 ] = edge->_neibors[iN];
+
+ int maxNbSteps = Max( ee[0]->NbSteps(), ee[1]->NbSteps() );
+ while ( maxNbSteps > edge->NbSteps() && isBad )
+ {
+ --maxNbSteps;
+ for ( int iE = 0; iE < 2; ++iE )
+ {
+ if ( ee[ iE ]->NbSteps() > maxNbSteps &&
+ ee[ iE ]->NbSteps() > 1 )
+ {
+ _EdgesOnShape* eos = data.GetShapeEdges( ee[ iE ] );
+ ee[ iE ]->InvalidateStep( ee[ iE ]->NbSteps(), *eos, /*restoreLength=*/true );
+ ee[ iE ]->Block( data );
+ ee[ iE ]->Set( INVALIDATED );
+ haveInvalidated = true;
+ }
+ }
+ if (( edge->_simplices[j].IsForward( &prevXYZ1, &tgtXYZ, vol )) /*&&
+ ( &prevXYZ1 == &prevXYZ2 || edge->_simplices[j].IsForward( &prevXYZ2, &tgtXYZ, vol ))*/)
+ isBad = false;
+ }
+ nbBad += isBad;
+ if ( !ee[0]->Is( ADDED )) badSmooEdges.push_back( ee[0] );
+ if ( !ee[1]->Is( ADDED )) badSmooEdges.push_back( ee[1] );
+ ee[0]->Set( ADDED );
+ ee[1]->Set( ADDED );
+ if ( isBad )
+ {
+ ee[0]->Set( TO_INVALIDATE );
+ ee[1]->Set( TO_INVALIDATE );
+ }
+ }
+
+ if ( !invalidated && nbBad > 0 && edge->NbSteps() > 1 )
+ {
+ _EdgesOnShape* eos = data.GetShapeEdges( edge );
+ edge->InvalidateStep( edge->NbSteps(), *eos, /*restoreLength=*/true );
+ edge->Block( data );
+ edge->Set( INVALIDATED );
+ edge->Unset( TO_INVALIDATE );
+ haveInvalidated = true;
+ }
+ } // loop on badSmooEdges
+ } // while ( haveInvalidated )
+
+ // re-smooth on analytical EDGEs
+ for ( size_t i = 0; i < badSmooEdges.size(); ++i )
+ {
+ _LayerEdge* edge = badSmooEdges[i];
+ if ( !edge->Is( INVALIDATED )) continue;
+
+ _EdgesOnShape* eos = data.GetShapeEdges( edge );
+ if ( eos->ShapeType() == TopAbs_VERTEX )
+ {
+ PShapeIteratorPtr eIt = helper.GetAncestors( eos->_shape, *_mesh, TopAbs_EDGE );
+ while ( const TopoDS_Shape* e = eIt->next() )
+ if ( _EdgesOnShape* eoe = data.GetShapeEdges( *e ))
+ if ( eoe->_edgeSmoother && eoe->_edgeSmoother->isAnalytic() )
+ {
+ // TopoDS_Face F; Handle(ShapeAnalysis_Surface) surface;
+ // if ( eoe->SWOLType() == TopAbs_FACE ) {
+ // F = TopoDS::Face( eoe->_sWOL );
+ // surface = helper.GetSurface( F );
+ // }
+ // eoe->_edgeSmoother->Perform( data, surface, F, helper );
+ eoe->_edgeSmoother->_anaCurve.Nullify();
+ }
+ }
+ }
- Sort2NeiborsOnEdge( iFrom, iTo );
+
+ // check result of invalidation
+
+ int nbBad = 0;
+ for ( size_t iEOS = 0; iEOS < eosC1.size(); ++iEOS )
+ {
+ for ( size_t i = 0; i < eosC1[ iEOS ]->_edges.size(); ++i )
+ {
+ if ( !eosC1[ iEOS ]->_sWOL.IsNull() ) continue;
+ _LayerEdge* edge = eosC1[ iEOS ]->_edges[i];
+ SMESH_TNodeXYZ tgtXYZ = edge->_nodes.back();
+ gp_XYZ prevXYZ = edge->PrevCheckPos( eosC1[ iEOS ]);
+ for ( size_t j = 0; j < edge->_simplices.size(); ++j )
+ if ( !edge->_simplices[j].IsForward( &prevXYZ, &tgtXYZ, vol ))
+ {
+ ++nbBad;
+ debugMsg("Bad simplex remains ( " << edge->_nodes[0]->GetID()
+ << " "<< tgtXYZ._node->GetID()
+ << " "<< edge->_simplices[j]._nPrev->GetID()
+ << " "<< edge->_simplices[j]._nNext->GetID() << " )" );
+ }
+ }
+ }
+ dumpFunctionEnd();
+
+ return nbBad;
}
//================================================================================
/*!
- * \brief Set _2neibors according to the order of _LayerEdge on EDGE
+ * \brief Create an offset surface
*/
//================================================================================
-void _SolidData::Sort2NeiborsOnEdge( const int iFrom, const int iTo)
+void _ViscousBuilder::makeOffsetSurface( _EdgesOnShape& eos, SMESH_MesherHelper& helper )
{
- for ( int i = iFrom; i < iTo-1; ++i )
- if ( _edges[i]->_2neibors->tgtNode(1) != _edges[i+1]->_nodes.back() )
- _edges[i]->_2neibors->reverse();
- if ( iTo - iFrom > 1 &&
- _edges[iTo-1]->_2neibors->tgtNode(0) != _edges[iTo-2]->_nodes.back() )
- _edges[iTo-1]->_2neibors->reverse();
+ if ( eos._offsetSurf.IsNull() ||
+ eos._edgeForOffset == 0 ||
+ eos._edgeForOffset->Is( _LayerEdge::BLOCKED ))
+ return;
+
+ Handle(ShapeAnalysis_Surface) baseSurface = helper.GetSurface( TopoDS::Face( eos._shape ));
+
+ // find offset
+ gp_Pnt tgtP = SMESH_TNodeXYZ( eos._edgeForOffset->_nodes.back() );
+ /*gp_Pnt2d uv=*/baseSurface->ValueOfUV( tgtP, Precision::Confusion() );
+ double offset = baseSurface->Gap();
+
+ eos._offsetSurf.Nullify();
+
+ try
+ {
+ BRepOffsetAPI_MakeOffsetShape offsetMaker;
+ offsetMaker.PerformByJoin( eos._shape, -offset, Precision::Confusion() );
+ if ( !offsetMaker.IsDone() ) return;
+
+ TopExp_Explorer fExp( offsetMaker.Shape(), TopAbs_FACE );
+ if ( !fExp.More() ) return;
+
+ TopoDS_Face F = TopoDS::Face( fExp.Current() );
+ Handle(Geom_Surface) surf = BRep_Tool::Surface( F );
+ if ( surf.IsNull() ) return;
+
+ eos._offsetSurf = new ShapeAnalysis_Surface( surf );
+ }
+ catch ( Standard_Failure& )
+ {
+ }
}
//================================================================================
/*!
- * \brief Return index corresponding to the shape in _endEdgeOnShape
+ * \brief Put nodes of a curved FACE to its offset surface
*/
//================================================================================
-bool _SolidData::GetShapeEdges(const TGeomID shapeID,
- size_t & iEdgesEnd,
- int* iBeg,
- int* iEnd ) const
+void _ViscousBuilder::putOnOffsetSurface( _EdgesOnShape& eos,
+ int infStep,
+ vector< _EdgesOnShape* >& eosC1,
+ int smooStep,
+ int moveAll )
{
- int beg = 0, end = 0;
- for ( iEdgesEnd = 0; iEdgesEnd < _endEdgeOnShape.size(); ++iEdgesEnd )
+ _EdgesOnShape * eof = & eos;
+ if ( eos.ShapeType() != TopAbs_FACE ) // eos is a boundary of C1 FACE, look for the FACE eos
{
- end = _endEdgeOnShape[ iEdgesEnd ];
- TGeomID sID = _edges[ beg ]->_nodes[0]->getshapeId();
- if ( sID == shapeID )
+ eof = 0;
+ for ( size_t i = 0; i < eosC1.size() && !eof; ++i )
{
- if ( iBeg ) *iBeg = beg;
- if ( iEnd ) *iEnd = end;
- return true;
+ if ( eosC1[i]->_offsetSurf.IsNull() ||
+ eosC1[i]->ShapeType() != TopAbs_FACE ||
+ eosC1[i]->_edgeForOffset == 0 ||
+ eosC1[i]->_edgeForOffset->Is( _LayerEdge::BLOCKED ))
+ continue;
+ if ( SMESH_MesherHelper::IsSubShape( eos._shape, eosC1[i]->_shape ))
+ eof = eosC1[i];
}
- beg = end;
}
- return false;
+ if ( !eof ||
+ eof->_offsetSurf.IsNull() ||
+ eof->ShapeType() != TopAbs_FACE ||
+ eof->_edgeForOffset == 0 ||
+ eof->_edgeForOffset->Is( _LayerEdge::BLOCKED ))
+ return;
+
+ double preci = BRep_Tool::Tolerance( TopoDS::Face( eof->_shape )), vol;
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ {
+ _LayerEdge* edge = eos._edges[i];
+ edge->Unset( _LayerEdge::MARKED );
+ if ( edge->Is( _LayerEdge::BLOCKED ) || !edge->_curvature )
+ continue;
+ if ( moveAll == _LayerEdge::UPD_NORMAL_CONV )
+ {
+ if ( !edge->Is( _LayerEdge::UPD_NORMAL_CONV ))
+ continue;
+ }
+ else if ( !moveAll && !edge->Is( _LayerEdge::MOVED ))
+ continue;
+
+ int nbBlockedAround = 0;
+ for ( size_t iN = 0; iN < edge->_neibors.size(); ++iN )
+ nbBlockedAround += edge->_neibors[iN]->Is( _LayerEdge::BLOCKED );
+ if ( nbBlockedAround > 1 )
+ continue;
+
+ gp_Pnt tgtP = SMESH_TNodeXYZ( edge->_nodes.back() );
+ gp_Pnt2d uv = eof->_offsetSurf->NextValueOfUV( edge->_curvature->_uv, tgtP, preci );
+ if ( eof->_offsetSurf->Gap() > edge->_len ) continue; // NextValueOfUV() bug
+ edge->_curvature->_uv = uv;
+ if ( eof->_offsetSurf->Gap() < 10 * preci ) continue; // same pos
+
+ gp_XYZ newP = eof->_offsetSurf->Value( uv ).XYZ();
+ gp_XYZ prevP = edge->PrevCheckPos();
+ bool ok = true;
+ if ( !moveAll )
+ for ( size_t iS = 0; iS < edge->_simplices.size() && ok; ++iS )
+ {
+ ok = edge->_simplices[iS].IsForward( &prevP, &newP, vol );
+ }
+ if ( ok )
+ {
+ SMDS_MeshNode* n = const_cast< SMDS_MeshNode* >( edge->_nodes.back() );
+ n->setXYZ( newP.X(), newP.Y(), newP.Z());
+ edge->_pos.back() = newP;
+
+ edge->Set( _LayerEdge::MARKED );
+ if ( moveAll == _LayerEdge::UPD_NORMAL_CONV )
+ {
+ edge->_normal = ( newP - prevP ).Normalized();
+ }
+ }
+ }
+
+
+
+#ifdef _DEBUG_
+ // dumpMove() for debug
+ size_t i = 0;
+ for ( ; i < eos._edges.size(); ++i )
+ if ( eos._edges[i]->Is( _LayerEdge::MARKED ))
+ break;
+ if ( i < eos._edges.size() )
+ {
+ dumpFunction(SMESH_Comment("putOnOffsetSurface_S") << eos._shapeID
+ << "_InfStep" << infStep << "_" << smooStep );
+ for ( ; i < eos._edges.size(); ++i )
+ {
+ if ( eos._edges[i]->Is( _LayerEdge::MARKED )) {
+ dumpMove( eos._edges[i]->_nodes.back() );
+ }
+ }
+ dumpFunctionEnd();
+ }
+#endif
+
+ _ConvexFace* cnvFace;
+ if ( moveAll != _LayerEdge::UPD_NORMAL_CONV &&
+ eos.ShapeType() == TopAbs_FACE &&
+ (cnvFace = eos.GetData().GetConvexFace( eos._shapeID )) &&
+ !cnvFace->_normalsFixedOnBorders )
+ {
+ // put on the surface nodes built on FACE boundaries
+ SMESH_subMeshIteratorPtr smIt = eos._subMesh->getDependsOnIterator(/*includeSelf=*/false);
+ while ( smIt->more() )
+ {
+ SMESH_subMesh* sm = smIt->next();
+ _EdgesOnShape* subEOS = eos.GetData().GetShapeEdges( sm->GetId() );
+ if ( !subEOS->_sWOL.IsNull() ) continue;
+ if ( std::find( eosC1.begin(), eosC1.end(), subEOS ) != eosC1.end() ) continue;
+
+ putOnOffsetSurface( *subEOS, infStep, eosC1, smooStep, _LayerEdge::UPD_NORMAL_CONV );
+ }
+ cnvFace->_normalsFixedOnBorders = true;
+ }
}
//================================================================================
/*!
- * \brief Prepare data of the _LayerEdge for smoothing on FACE
+ * \brief Return a curve of the EDGE to be used for smoothing and arrange
+ * _LayerEdge's to be in a consequent order
*/
//================================================================================
-void _SolidData::PrepareEdgesToSmoothOnFace( _LayerEdge** edgeBeg,
- _LayerEdge** edgeEnd,
- const TopoDS_Face& face,
- bool substituteSrcNodes )
+Handle(Geom_Curve) _Smoother1D::CurveForSmooth( const TopoDS_Edge& E,
+ _EdgesOnShape& eos,
+ SMESH_MesherHelper& helper)
{
- set< TGeomID > vertices;
- SMESH_MesherHelper helper( *_proxyMesh->GetMesh() );
- if ( isConcave( face, helper, &vertices ))
- _concaveFaces.insert( (*edgeBeg)->_nodes[0]->getshapeId() );
+ SMESHDS_SubMesh* smDS = eos._subMesh->GetSubMeshDS();
- for ( _LayerEdge** edge = edgeBeg; edge != edgeEnd; ++edge )
- (*edge)->_smooFunction = 0;
+ TopLoc_Location loc; double f,l;
- for ( ; edgeBeg != edgeEnd; ++edgeBeg )
+ Handle(Geom_Line) line;
+ Handle(Geom_Circle) circle;
+ bool isLine, isCirc;
+ if ( eos._sWOL.IsNull() ) /////////////////////////////////////////// 3D case
{
- _LayerEdge* edge = *edgeBeg;
- _Simplex::GetSimplices
- ( edge->_nodes[0], edge->_simplices, _ignoreFaceIds, this, /*sort=*/true );
+ // check if the EDGE is a line
+ Handle(Geom_Curve) curve = BRep_Tool::Curve( E, f, l);
+ if ( curve->IsKind( STANDARD_TYPE( Geom_TrimmedCurve )))
+ curve = Handle(Geom_TrimmedCurve)::DownCast( curve )->BasisCurve();
- edge->ChooseSmooFunction( vertices, _n2eMap );
+ line = Handle(Geom_Line)::DownCast( curve );
+ circle = Handle(Geom_Circle)::DownCast( curve );
+ isLine = (!line.IsNull());
+ isCirc = (!circle.IsNull());
- double avgNormProj = 0, avgLen = 0;
- for ( size_t i = 0; i < edge->_simplices.size(); ++i )
+ if ( !isLine && !isCirc ) // Check if the EDGE is close to a line
{
- _Simplex& s = edge->_simplices[i];
+ isLine = SMESH_Algo::IsStraight( E );
- gp_XYZ vec = edge->_pos.back() - SMESH_TNodeXYZ( s._nPrev );
- avgNormProj += edge->_normal * vec;
- avgLen += vec.Modulus();
- if ( substituteSrcNodes )
- {
- s._nNext = _n2eMap[ s._nNext ]->_nodes.back();
- s._nPrev = _n2eMap[ s._nPrev ]->_nodes.back();
- }
+ if ( isLine )
+ line = new Geom_Line( gp::OX() ); // only type does matter
+ }
+ if ( !isLine && !isCirc && eos._edges.size() > 2) // Check if the EDGE is close to a circle
+ {
+ // TODO
+ }
+ }
+ else //////////////////////////////////////////////////////////////////////// 2D case
+ {
+ if ( !eos._isRegularSWOL ) // 23190
+ return NULL;
+
+ const TopoDS_Face& F = TopoDS::Face( eos._sWOL );
+
+ // check if the EDGE is a line
+ Handle(Geom2d_Curve) curve = BRep_Tool::CurveOnSurface( E, F, f, l );
+ if ( curve->IsKind( STANDARD_TYPE( Geom2d_TrimmedCurve )))
+ curve = Handle(Geom2d_TrimmedCurve)::DownCast( curve )->BasisCurve();
+
+ Handle(Geom2d_Line) line2d = Handle(Geom2d_Line)::DownCast( curve );
+ Handle(Geom2d_Circle) circle2d = Handle(Geom2d_Circle)::DownCast( curve );
+ isLine = (!line2d.IsNull());
+ isCirc = (!circle2d.IsNull());
+
+ if ( !isLine && !isCirc ) // Check if the EDGE is close to a line
+ {
+ Bnd_B2d bndBox;
+ SMDS_NodeIteratorPtr nIt = smDS->GetNodes();
+ while ( nIt->more() )
+ bndBox.Add( helper.GetNodeUV( F, nIt->next() ));
+ gp_XY size = bndBox.CornerMax() - bndBox.CornerMin();
+
+ const double lineTol = 1e-2 * sqrt( bndBox.SquareExtent() );
+ for ( int i = 0; i < 2 && !isLine; ++i )
+ isLine = ( size.Coord( i+1 ) <= lineTol );
+ }
+ if ( !isLine && !isCirc && eos._edges.size() > 2 ) // Check if the EDGE is close to a circle
+ {
+ // TODO
+ }
+ if ( isLine )
+ {
+ line = new Geom_Line( gp::OX() ); // only type does matter
+ }
+ else if ( isCirc )
+ {
+ gp_Pnt2d p = circle2d->Location();
+ gp_Ax2 ax( gp_Pnt( p.X(), p.Y(), 0), gp::DX());
+ circle = new Geom_Circle( ax, 1.); // only center position does matter
}
- avgNormProj /= edge->_simplices.size();
- avgLen /= edge->_simplices.size();
- edge->_curvature = _Curvature::New( avgNormProj, avgLen );
}
+
+ if ( isLine )
+ return line;
+ if ( isCirc )
+ return circle;
+
+ return Handle(Geom_Curve)();
}
//================================================================================
/*!
- * \brief Add faces for smoothing
+ * \brief Smooth edges on EDGE
+ */
+//================================================================================
+
+bool _Smoother1D::Perform(_SolidData& data,
+ Handle(ShapeAnalysis_Surface)& surface,
+ const TopoDS_Face& F,
+ SMESH_MesherHelper& helper )
+{
+ if ( _leParams.empty() || ( !isAnalytic() && _offPoints.empty() ))
+ prepare( data );
+
+ findEdgesToSmooth();
+ if ( isAnalytic() )
+ return smoothAnalyticEdge( data, surface, F, helper );
+ else
+ return smoothComplexEdge ( data, surface, F, helper );
+}
+
+//================================================================================
+/*!
+ * \brief Find edges to smooth
*/
//================================================================================
-void _SolidData::AddShapesToSmooth( const set< TGeomID >& faceIDs )
+void _Smoother1D::findEdgesToSmooth()
{
- // convert faceIDs to indices in _endEdgeOnShape
- set< size_t > iEnds;
- size_t end;
- set< TGeomID >::const_iterator fId = faceIDs.begin();
- for ( ; fId != faceIDs.end(); ++fId )
- if ( GetShapeEdges( *fId, end ) && end >= _nbShapesToSmooth )
- iEnds.insert( end );
+ _LayerEdge* leOnV[2] = { getLEdgeOnV(0), getLEdgeOnV(1) };
+ for ( int iEnd = 0; iEnd < 2; ++iEnd )
+ if ( leOnV[iEnd]->Is( _LayerEdge::NORMAL_UPDATED ))
+ _leOnV[iEnd]._cosin = Abs( _edgeDir[iEnd].Normalized() * leOnV[iEnd]->_normal );
- set< size_t >::iterator endsIt = iEnds.begin();
+ _eToSmooth[0].first = _eToSmooth[0].second = 0;
- // "add" by move of _nbShapesToSmooth
- int nbFacesToAdd = iEnds.size();
- while ( endsIt != iEnds.end() && *endsIt == _nbShapesToSmooth )
+ for ( size_t i = 0; i < _eos.size(); ++i )
{
- ++endsIt;
- ++_nbShapesToSmooth;
- --nbFacesToAdd;
+ if ( !_eos[i]->Is( _LayerEdge::TO_SMOOTH ))
+ {
+ if ( needSmoothing( _leOnV[0]._cosin,
+ _eos[i]->_len * leOnV[0]->_lenFactor, _curveLen * _leParams[i] ) ||
+ isToSmooth( i )
+ )
+ _eos[i]->Set( _LayerEdge::TO_SMOOTH );
+ else
+ break;
+ }
+ _eToSmooth[0].second = i+1;
}
- if ( endsIt == iEnds.end() )
- return;
- // Move _LayerEdge's on FACEs just after _nbShapesToSmooth
+ _eToSmooth[1].first = _eToSmooth[1].second = _eos.size();
- vector< _LayerEdge* > nonSmoothLE, smoothLE;
- size_t lastSmooth = *iEnds.rbegin();
- int iBeg, iEnd;
- for ( size_t i = _nbShapesToSmooth; i <= lastSmooth; ++i )
+ for ( int i = _eos.size() - 1; i >= _eToSmooth[0].second; --i )
{
- bool toSmooth = iEnds.count(i);
- vector< _LayerEdge* > & edgesVec = toSmooth ? smoothLE : nonSmoothLE;
- iBeg = i ? _endEdgeOnShape[ i-1 ] : 0;
- iEnd = _endEdgeOnShape[ i ];
- edgesVec.insert( edgesVec.end(), _edges.begin() + iBeg, _edges.begin() + iEnd );
-
- // preparation for smoothing on FACE
- if ( toSmooth && _edges[iBeg]->_nodes[0]->GetPosition()->GetDim() == 2 )
+ if ( !_eos[i]->Is( _LayerEdge::TO_SMOOTH ))
{
- TopoDS_Shape S = SMESH_MesherHelper::GetSubShapeByNode( _edges[iBeg]->_nodes[0],
- _proxyMesh->GetMeshDS() );
- if ( !S.IsNull() && S.ShapeType() == TopAbs_FACE )
- {
- PrepareEdgesToSmoothOnFace( &_edges[ iBeg ],
- &_edges[ iEnd ],
- TopoDS::Face( S ),
- /*substituteSrcNodes=*/true );
- }
+ if ( needSmoothing( _leOnV[1]._cosin,
+ _eos[i]->_len * leOnV[1]->_lenFactor, _curveLen * ( 1.-_leParams[i] )) ||
+ isToSmooth( i ))
+ _eos[i]->Set( _LayerEdge::TO_SMOOTH );
+ else
+ break;
}
+ _eToSmooth[1].first = i;
}
+}
- iBeg = _nbShapesToSmooth ? _endEdgeOnShape[ _nbShapesToSmooth-1 ] : 0;
- std::copy( smoothLE.begin(), smoothLE.end(), &_edges[ iBeg ] );
- std::copy( nonSmoothLE.begin(), nonSmoothLE.end(), &_edges[ iBeg + smoothLE.size()]);
+//================================================================================
+/*!
+ * \brief Check if iE-th _LayerEdge needs smoothing
+ */
+//================================================================================
- // update _endEdgeOnShape
- for ( size_t i = _nbShapesToSmooth; i < _endEdgeOnShape.size(); ++i )
- {
- TGeomID curShape = _edges[ iBeg ]->_nodes[0]->getshapeId();
- while ( ++iBeg < _edges.size() &&
- curShape == _edges[ iBeg ]->_nodes[0]->getshapeId() );
+bool _Smoother1D::isToSmooth( int iE )
+{
+ SMESH_NodeXYZ pi( _eos[iE]->_nodes[0] );
+ SMESH_NodeXYZ p0( _eos[iE]->_2neibors->srcNode(0) );
+ SMESH_NodeXYZ p1( _eos[iE]->_2neibors->srcNode(1) );
+ gp_XYZ seg0 = pi - p0;
+ gp_XYZ seg1 = p1 - pi;
+ gp_XYZ tangent = seg0 + seg1;
+ double tangentLen = tangent.Modulus();
+ double segMinLen = Min( seg0.Modulus(), seg1.Modulus() );
+ if ( tangentLen < std::numeric_limits<double>::min() )
+ return false;
+ tangent /= tangentLen;
- _endEdgeOnShape[ i ] = iBeg;
+ for ( size_t i = 0; i < _eos[iE]->_neibors.size(); ++i )
+ {
+ _LayerEdge* ne = _eos[iE]->_neibors[i];
+ if ( !ne->Is( _LayerEdge::TO_SMOOTH ) ||
+ ne->_nodes.size() < 2 ||
+ ne->_nodes[0]->GetPosition()->GetDim() != 2 )
+ continue;
+ gp_XYZ edgeVec = SMESH_NodeXYZ( ne->_nodes.back() ) - SMESH_NodeXYZ( ne->_nodes[0] );
+ double proj = edgeVec * tangent;
+ if ( needSmoothing( 1., proj, segMinLen ))
+ return true;
}
-
- _nbShapesToSmooth += nbFacesToAdd;
+ return false;
}
//================================================================================
*/
//================================================================================
-bool _ViscousBuilder::smoothAnalyticEdge( _SolidData& data,
- const int iFrom,
- const int iTo,
- Handle(Geom_Surface)& surface,
- const TopoDS_Face& F,
- SMESH_MesherHelper& helper)
+bool _Smoother1D::smoothAnalyticEdge( _SolidData& data,
+ Handle(ShapeAnalysis_Surface)& surface,
+ const TopoDS_Face& F,
+ SMESH_MesherHelper& helper)
{
- TopoDS_Shape S = helper.GetSubShapeByNode( data._edges[ iFrom ]->_nodes[0],
- helper.GetMeshDS());
- TopoDS_Edge E = TopoDS::Edge( S );
+ if ( !isAnalytic() ) return false;
- Handle(Geom_Curve) curve = data.CurveForSmooth( E, iFrom, iTo, F, helper );
- if ( curve.IsNull() ) return false;
-
- // compute a relative length of segments
- vector< double > len( iTo-iFrom+1 );
- {
- double curLen, prevLen = len[0] = 1.0;
- for ( int i = iFrom; i < iTo; ++i )
- {
- curLen = prevLen * data._edges[i]->_2neibors->_wgt[0] / data._edges[i]->_2neibors->_wgt[1];
- len[i-iFrom+1] = len[i-iFrom] + curLen;
- prevLen = curLen;
- }
- }
+ size_t iFrom = 0, iTo = _eos._edges.size();
- if ( curve->IsKind( STANDARD_TYPE( Geom_Line )))
+ if ( _anaCurve->IsKind( STANDARD_TYPE( Geom_Line )))
{
if ( F.IsNull() ) // 3D
{
- SMESH_TNodeXYZ p0( data._edges[iFrom]->_2neibors->tgtNode(0));
- SMESH_TNodeXYZ p1( data._edges[iTo-1]->_2neibors->tgtNode(1));
- for ( int i = iFrom; i < iTo; ++i )
- {
- double r = len[i-iFrom] / len.back();
- gp_XYZ newPos = p0 * ( 1. - r ) + p1 * r;
- data._edges[i]->_pos.back() = newPos;
- SMDS_MeshNode* tgtNode = const_cast<SMDS_MeshNode*>( data._edges[i]->_nodes.back() );
- tgtNode->setXYZ( newPos.X(), newPos.Y(), newPos.Z() );
- dumpMove( tgtNode );
+ SMESH_TNodeXYZ pSrc0( _eos._edges[iFrom]->_2neibors->srcNode(0) );
+ SMESH_TNodeXYZ pSrc1( _eos._edges[iTo-1]->_2neibors->srcNode(1) );
+ //const gp_XYZ lineDir = pSrc1 - pSrc0;
+ //_LayerEdge* vLE0 = getLEdgeOnV( 0 );
+ //_LayerEdge* vLE1 = getLEdgeOnV( 1 );
+ // bool shiftOnly = ( vLE0->Is( _LayerEdge::NORMAL_UPDATED ) ||
+ // vLE0->Is( _LayerEdge::BLOCKED ) ||
+ // vLE1->Is( _LayerEdge::NORMAL_UPDATED ) ||
+ // vLE1->Is( _LayerEdge::BLOCKED ));
+ for ( int iEnd = 0; iEnd < 2; ++iEnd )
+ {
+ iFrom = _eToSmooth[ iEnd ].first, iTo = _eToSmooth[ iEnd ].second;
+ if ( iFrom >= iTo ) continue;
+ SMESH_TNodeXYZ p0( _eos[iFrom]->_2neibors->tgtNode(0) );
+ SMESH_TNodeXYZ p1( _eos[iTo-1]->_2neibors->tgtNode(1) );
+ double param0 = ( iFrom == 0 ) ? 0. : _leParams[ iFrom-1 ];
+ double param1 = _leParams[ iTo ];
+ for ( size_t i = iFrom; i < iTo; ++i )
+ {
+ _LayerEdge* edge = _eos[i];
+ SMDS_MeshNode* tgtNode = const_cast<SMDS_MeshNode*>( edge->_nodes.back() );
+ double param = ( _leParams[i] - param0 ) / ( param1 - param0 );
+ gp_XYZ newPos = p0 * ( 1. - param ) + p1 * param;
+
+ // if ( shiftOnly || edge->Is( _LayerEdge::NORMAL_UPDATED ))
+ // {
+ // gp_XYZ curPos = SMESH_TNodeXYZ ( tgtNode );
+ // double shift = ( lineDir * ( newPos - pSrc0 ) -
+ // lineDir * ( curPos - pSrc0 ));
+ // newPos = curPos + lineDir * shift / lineDir.SquareModulus();
+ // }
+ if ( edge->Is( _LayerEdge::BLOCKED ))
+ {
+ SMESH_TNodeXYZ pSrc( edge->_nodes[0] );
+ double curThick = pSrc.SquareDistance( tgtNode );
+ double newThink = ( pSrc - newPos ).SquareModulus();
+ if ( newThink > curThick )
+ continue;
+ }
+ edge->_pos.back() = newPos;
+ tgtNode->setXYZ( newPos.X(), newPos.Y(), newPos.Z() );
+ dumpMove( tgtNode );
+ }
}
}
- else
+ else // 2D
{
- // gp_XY uv0 = helper.GetNodeUV( F, data._edges[iFrom]->_2neibors->tgtNode(0));
- // gp_XY uv1 = helper.GetNodeUV( F, data._edges[iTo-1]->_2neibors->tgtNode(1));
- gp_XY uv0 = data._edges[iFrom]->_2neibors->_edges[0]->LastUV( F );
- gp_XY uv1 = data._edges[iTo-1]->_2neibors->_edges[1]->LastUV( F );
- if ( data._edges[iFrom]->_2neibors->tgtNode(0) ==
- data._edges[iTo-1]->_2neibors->tgtNode(1) ) // closed edge
+ _LayerEdge* eV0 = getLEdgeOnV( 0 );
+ _LayerEdge* eV1 = getLEdgeOnV( 1 );
+ gp_XY uvV0 = eV0->LastUV( F, *data.GetShapeEdges( eV0 ));
+ gp_XY uvV1 = eV1->LastUV( F, *data.GetShapeEdges( eV1 ));
+ if ( eV0->_nodes.back() == eV1->_nodes.back() ) // closed edge
{
int iPeriodic = helper.GetPeriodicIndex();
if ( iPeriodic == 1 || iPeriodic == 2 )
{
- uv1.SetCoord( iPeriodic, helper.GetOtherParam( uv1.Coord( iPeriodic )));
- if ( uv0.Coord( iPeriodic ) > uv1.Coord( iPeriodic ))
- std::swap( uv0, uv1 );
+ uvV1.SetCoord( iPeriodic, helper.GetOtherParam( uvV1.Coord( iPeriodic )));
+ if ( uvV0.Coord( iPeriodic ) > uvV1.Coord( iPeriodic ))
+ std::swap( uvV0, uvV1 );
}
}
- const gp_XY rangeUV = uv1 - uv0;
- for ( int i = iFrom; i < iTo; ++i )
- {
- double r = len[i-iFrom] / len.back();
- gp_XY newUV = uv0 + r * rangeUV;
- data._edges[i]->_pos.back().SetCoord( newUV.X(), newUV.Y(), 0 );
+ for ( int iEnd = 0; iEnd < 2; ++iEnd )
+ {
+ iFrom = _eToSmooth[ iEnd ].first, iTo = _eToSmooth[ iEnd ].second;
+ if ( iFrom >= iTo ) continue;
+ _LayerEdge* e0 = _eos[iFrom]->_2neibors->_edges[0];
+ _LayerEdge* e1 = _eos[iTo-1]->_2neibors->_edges[1];
+ gp_XY uv0 = ( e0 == eV0 ) ? uvV0 : e0->LastUV( F, _eos );
+ gp_XY uv1 = ( e1 == eV1 ) ? uvV1 : e1->LastUV( F, _eos );
+ double param0 = ( iFrom == 0 ) ? 0. : _leParams[ iFrom-1 ];
+ double param1 = _leParams[ iTo ];
+ gp_XY rangeUV = uv1 - uv0;
+ for ( size_t i = iFrom; i < iTo; ++i )
+ {
+ if ( _eos[i]->Is( _LayerEdge::BLOCKED )) continue;
+ double param = ( _leParams[i] - param0 ) / ( param1 - param0 );
+ gp_XY newUV = uv0 + param * rangeUV;
- gp_Pnt newPos = surface->Value( newUV.X(), newUV.Y() );
- SMDS_MeshNode* tgtNode = const_cast<SMDS_MeshNode*>( data._edges[i]->_nodes.back() );
- tgtNode->setXYZ( newPos.X(), newPos.Y(), newPos.Z() );
- dumpMove( tgtNode );
+ gp_Pnt newPos = surface->Value( newUV.X(), newUV.Y() );
+ SMDS_MeshNode* tgtNode = const_cast<SMDS_MeshNode*>( _eos[i]->_nodes.back() );
+ tgtNode->setXYZ( newPos.X(), newPos.Y(), newPos.Z() );
+ dumpMove( tgtNode );
- SMDS_FacePosition* pos = static_cast<SMDS_FacePosition*>( tgtNode->GetPosition() );
- pos->SetUParameter( newUV.X() );
- pos->SetVParameter( newUV.Y() );
+ SMDS_FacePositionPtr pos = tgtNode->GetPosition();
+ pos->SetUParameter( newUV.X() );
+ pos->SetVParameter( newUV.Y() );
+
+ gp_XYZ newUV0( newUV.X(), newUV.Y(), 0 );
+
+ if ( !_eos[i]->Is( _LayerEdge::SMOOTHED ))
+ {
+ _eos[i]->Set( _LayerEdge::SMOOTHED ); // to check in refine() (IPAL54237)
+ if ( _eos[i]->_pos.size() > 2 )
+ {
+ // modify previous positions to make _LayerEdge less sharply bent
+ vector<gp_XYZ>& uvVec = _eos[i]->_pos;
+ const gp_XYZ uvShift = newUV0 - uvVec.back();
+ const double len2 = ( uvVec.back() - uvVec[ 0 ] ).SquareModulus();
+ int iPrev = uvVec.size() - 2;
+ while ( iPrev > 0 )
+ {
+ double r = ( uvVec[ iPrev ] - uvVec[0] ).SquareModulus() / len2;
+ uvVec[ iPrev ] += uvShift * r;
+ --iPrev;
+ }
+ }
+ }
+ _eos[i]->_pos.back() = newUV0;
+ }
}
}
return true;
}
- if ( curve->IsKind( STANDARD_TYPE( Geom_Circle )))
+ if ( _anaCurve->IsKind( STANDARD_TYPE( Geom_Circle )))
{
- Handle(Geom_Circle) circle = Handle(Geom_Circle)::DownCast( curve );
+ Handle(Geom_Circle) circle = Handle(Geom_Circle)::DownCast( _anaCurve );
gp_Pnt center3D = circle->Location();
if ( F.IsNull() ) // 3D
{
- if ( data._edges[iFrom]->_2neibors->tgtNode(0) ==
- data._edges[iTo-1]->_2neibors->tgtNode(1) )
+ if ( getLEdgeOnV( 0 )->_nodes.back() == getLEdgeOnV( 1 )->_nodes.back() )
return true; // closed EDGE - nothing to do
- return false; // TODO ???
+ // circle is a real curve of EDGE
+ gp_Circ circ = circle->Circ();
+
+ // new center is shifted along its axis
+ const gp_Dir& axis = circ.Axis().Direction();
+ _LayerEdge* e0 = getLEdgeOnV(0);
+ _LayerEdge* e1 = getLEdgeOnV(1);
+ SMESH_TNodeXYZ p0 = e0->_nodes.back();
+ SMESH_TNodeXYZ p1 = e1->_nodes.back();
+ double shift1 = axis.XYZ() * ( p0 - center3D.XYZ() );
+ double shift2 = axis.XYZ() * ( p1 - center3D.XYZ() );
+ gp_Pnt newCenter = center3D.XYZ() + axis.XYZ() * 0.5 * ( shift1 + shift2 );
+
+ double newRadius = 0.5 * ( newCenter.Distance( p0 ) + newCenter.Distance( p1 ));
+
+ gp_Ax2 newAxis( newCenter, axis, gp_Vec( newCenter, p0 ));
+ gp_Circ newCirc( newAxis, newRadius );
+ gp_Vec vecC1 ( newCenter, p1 );
+
+ double uLast = newAxis.XDirection().AngleWithRef( vecC1, newAxis.Direction() ); // -PI - +PI
+ if ( uLast < 0 )
+ uLast += 2 * M_PI;
+
+ for ( size_t i = 0; i < _eos.size(); ++i )
+ {
+ if ( _eos[i]->Is( _LayerEdge::BLOCKED )) continue;
+ //if ( !_eos[i]->Is( _LayerEdge::TO_SMOOTH )) continue;
+ double u = uLast * _leParams[i];
+ gp_Pnt p = ElCLib::Value( u, newCirc );
+ _eos._edges[i]->_pos.back() = p.XYZ();
+
+ SMDS_MeshNode* tgtNode = const_cast<SMDS_MeshNode*>( _eos._edges[i]->_nodes.back() );
+ tgtNode->setXYZ( p.X(), p.Y(), p.Z() );
+ dumpMove( tgtNode );
+ }
+ return true;
}
else // 2D
{
const gp_XY center( center3D.X(), center3D.Y() );
- gp_XY uv0 = data._edges[iFrom]->_2neibors->_edges[0]->LastUV( F );
- gp_XY uvM = data._edges[iFrom]->LastUV( F );
- gp_XY uv1 = data._edges[iTo-1]->_2neibors->_edges[1]->LastUV( F );
- // gp_XY uv0 = helper.GetNodeUV( F, data._edges[iFrom]->_2neibors->tgtNode(0));
- // gp_XY uvM = helper.GetNodeUV( F, data._edges[iFrom]->_nodes.back());
- // gp_XY uv1 = helper.GetNodeUV( F, data._edges[iTo-1]->_2neibors->tgtNode(1));
+ _LayerEdge* e0 = getLEdgeOnV(0);
+ _LayerEdge* eM = _eos._edges[ 0 ];
+ _LayerEdge* e1 = getLEdgeOnV(1);
+ gp_XY uv0 = e0->LastUV( F, *data.GetShapeEdges( e0 ) );
+ gp_XY uvM = eM->LastUV( F, *data.GetShapeEdges( eM ) );
+ gp_XY uv1 = e1->LastUV( F, *data.GetShapeEdges( e1 ) );
gp_Vec2d vec0( center, uv0 );
gp_Vec2d vecM( center, uvM );
gp_Vec2d vec1( center, uv1 );
gp_Ax2d axis( center, vec0 );
gp_Circ2d circ( axis, radius );
- for ( int i = iFrom; i < iTo; ++i )
+ for ( size_t i = 0; i < _eos.size(); ++i )
{
- double newU = uLast * len[i-iFrom] / len.back();
+ if ( _eos[i]->Is( _LayerEdge::BLOCKED )) continue;
+ //if ( !_eos[i]->Is( _LayerEdge::TO_SMOOTH )) continue;
+ double newU = uLast * _leParams[i];
gp_Pnt2d newUV = ElCLib::Value( newU, circ );
- data._edges[i]->_pos.back().SetCoord( newUV.X(), newUV.Y(), 0 );
+ _eos._edges[i]->_pos.back().SetCoord( newUV.X(), newUV.Y(), 0 );
gp_Pnt newPos = surface->Value( newUV.X(), newUV.Y() );
- SMDS_MeshNode* tgtNode = const_cast<SMDS_MeshNode*>( data._edges[i]->_nodes.back() );
+ SMDS_MeshNode* tgtNode = const_cast<SMDS_MeshNode*>( _eos._edges[i]->_nodes.back() );
tgtNode->setXYZ( newPos.X(), newPos.Y(), newPos.Z() );
dumpMove( tgtNode );
- SMDS_FacePosition* pos = static_cast<SMDS_FacePosition*>( tgtNode->GetPosition() );
+ SMDS_FacePositionPtr pos = tgtNode->GetPosition();
pos->SetUParameter( newUV.X() );
pos->SetVParameter( newUV.Y() );
+
+ _eos[i]->Set( _LayerEdge::SMOOTHED ); // to check in refine() (IPAL54237)
}
}
return true;
//================================================================================
/*!
- * \brief Modify normals of _LayerEdge's on EDGE's to avoid intersection with
- * _LayerEdge's on neighbor EDGE's
+ * \brief smooth _LayerEdge's on a an EDGE
*/
//================================================================================
-bool _ViscousBuilder::updateNormals( _SolidData& data,
- SMESH_MesherHelper& helper,
- int stepNb )
+bool _Smoother1D::smoothComplexEdge( _SolidData& /*data*/,
+ Handle(ShapeAnalysis_Surface)& surface,
+ const TopoDS_Face& F,
+ SMESH_MesherHelper& /*helper*/)
{
- if ( stepNb > 0 )
- return updateNormalsOfConvexFaces( data, helper, stepNb );
-
- // make temporary quadrangles got by extrusion of
- // mesh edges along _LayerEdge._normal's
+ if ( _offPoints.empty() )
+ return false;
- vector< const SMDS_MeshElement* > tmpFaces;
- {
- set< SMESH_TLink > extrudedLinks; // contains target nodes
- vector< const SMDS_MeshNode*> nodes(4); // of a tmp mesh face
+ // ----------------------------------------------
+ // move _offPoints along normals of _LayerEdge's
+ // ----------------------------------------------
+
+ _LayerEdge* e[2] = { getLEdgeOnV(0), getLEdgeOnV(1) };
+ if ( e[0]->Is( _LayerEdge::NORMAL_UPDATED ))
+ _leOnV[0]._normal = getNormalNormal( e[0]->_normal, _edgeDir[0] );
+ if ( e[1]->Is( _LayerEdge::NORMAL_UPDATED ))
+ _leOnV[1]._normal = getNormalNormal( e[1]->_normal, _edgeDir[1] );
+ _leOnV[0]._len = e[0]->_len;
+ _leOnV[1]._len = e[1]->_len;
+ for ( size_t i = 0; i < _offPoints.size(); i++ )
+ {
+ _LayerEdge* e0 = _offPoints[i]._2edges._edges[0];
+ _LayerEdge* e1 = _offPoints[i]._2edges._edges[1];
+ const double w0 = _offPoints[i]._2edges._wgt[0];
+ const double w1 = _offPoints[i]._2edges._wgt[1];
+ gp_XYZ avgNorm = ( e0->_normal * w0 + e1->_normal * w1 ).Normalized();
+ double avgLen = ( e0->_len * w0 + e1->_len * w1 );
+ double avgFact = ( e0->_lenFactor * w0 + e1->_lenFactor * w1 );
+ if ( e0->Is( _LayerEdge::NORMAL_UPDATED ) ||
+ e1->Is( _LayerEdge::NORMAL_UPDATED ))
+ avgNorm = getNormalNormal( avgNorm, _offPoints[i]._edgeDir );
+
+ _offPoints[i]._xyz += avgNorm * ( avgLen - _offPoints[i]._len ) * avgFact;
+ _offPoints[i]._len = avgLen;
+ }
+
+ double fTol = 0;
+ if ( !surface.IsNull() ) // project _offPoints to the FACE
+ {
+ fTol = 100 * BRep_Tool::Tolerance( F );
+ //const double segLen = _offPoints[0].Distance( _offPoints[1] );
+
+ gp_Pnt2d uv = surface->ValueOfUV( _offPoints[0]._xyz, fTol );
+ //if ( surface->Gap() < 0.5 * segLen )
+ _offPoints[0]._xyz = surface->Value( uv ).XYZ();
+
+ for ( size_t i = 1; i < _offPoints.size(); ++i )
+ {
+ uv = surface->NextValueOfUV( uv, _offPoints[i]._xyz, fTol );
+ //if ( surface->Gap() < 0.5 * segLen )
+ _offPoints[i]._xyz = surface->Value( uv ).XYZ();
+ }
+ }
+
+ // -----------------------------------------------------------------
+ // project tgt nodes of extreme _LayerEdge's to the offset segments
+ // -----------------------------------------------------------------
+
+ const int updatedOrBlocked = _LayerEdge::NORMAL_UPDATED | _LayerEdge::BLOCKED;
+ if ( e[0]->Is( updatedOrBlocked )) _iSeg[0] = 0;
+ if ( e[1]->Is( updatedOrBlocked )) _iSeg[1] = _offPoints.size()-2;
+
+ gp_Pnt pExtreme[2], pProj[2];
+ bool isProjected[2];
+ for ( int is2nd = 0; is2nd < 2; ++is2nd )
+ {
+ pExtreme[ is2nd ] = SMESH_TNodeXYZ( e[is2nd]->_nodes.back() );
+ int i = _iSeg[ is2nd ];
+ int di = is2nd ? -1 : +1;
+ bool & projected = isProjected[ is2nd ];
+ projected = false;
+ double uOnSeg, distMin = Precision::Infinite(), dist, distPrev = 0;
+ int nbWorse = 0;
+ do {
+ gp_Vec v0p( _offPoints[i]._xyz, pExtreme[ is2nd ] );
+ gp_Vec v01( _offPoints[i]._xyz, _offPoints[i+1]._xyz );
+ uOnSeg = ( v0p * v01 ) / v01.SquareMagnitude(); // param [0,1] along v01
+ projected = ( Abs( uOnSeg - 0.5 ) <= 0.5 );
+ dist = pExtreme[ is2nd ].SquareDistance( _offPoints[ i + ( uOnSeg > 0.5 )]._xyz );
+ if ( dist < distMin || projected )
+ {
+ _iSeg[ is2nd ] = i;
+ pProj[ is2nd ] = _offPoints[i]._xyz + ( v01 * uOnSeg ).XYZ();
+ distMin = dist;
+ }
+ else if ( dist > distPrev )
+ {
+ if ( ++nbWorse > 3 ) // avoid projection to the middle of a closed EDGE
+ break;
+ }
+ distPrev = dist;
+ i += di;
+ }
+ while ( !projected &&
+ i >= 0 && i+1 < (int)_offPoints.size() );
- dumpFunction(SMESH_Comment("makeTmpFacesOnEdges")<<data._index);
- for ( size_t i = 0; i < data._edges.size(); ++i )
+ if ( !projected )
{
- _LayerEdge* edge = data._edges[i];
- if ( !edge->IsOnEdge() || !edge->_sWOL.IsNull() ) continue;
- const SMDS_MeshNode* tgt1 = edge->_nodes.back();
- for ( int j = 0; j < 2; ++j ) // loop on _2NearEdges
+ if (( is2nd && _iSeg[1] != _offPoints.size()-2 ) || ( !is2nd && _iSeg[0] != 0 ))
{
- const SMDS_MeshNode* tgt2 = edge->_2neibors->tgtNode(j);
- pair< set< SMESH_TLink >::iterator, bool > link_isnew =
- extrudedLinks.insert( SMESH_TLink( tgt1, tgt2 ));
- if ( !link_isnew.second )
- {
- extrudedLinks.erase( link_isnew.first );
- continue; // already extruded and will no more encounter
- }
- // a _LayerEdge containg tgt2
- _LayerEdge* neiborEdge = edge->_2neibors->_edges[j];
+ _iSeg[0] = 0;
+ _iSeg[1] = _offPoints.size()-2;
+ debugMsg( "smoothComplexEdge() failed to project nodes of extreme _LayerEdge's" );
+ return false;
+ }
+ }
+ }
+ if ( _iSeg[0] > _iSeg[1] )
+ {
+ debugMsg( "smoothComplexEdge() incorrectly projected nodes of extreme _LayerEdge's" );
+ return false;
+ }
- _TmpMeshFaceOnEdge* f = new _TmpMeshFaceOnEdge( edge, neiborEdge, --_tmpFaceID );
- tmpFaces.push_back( f );
+ // adjust length of extreme LE (test viscous_layers_01/B7)
+ gp_Vec vDiv0( pExtreme[0], pProj[0] );
+ gp_Vec vDiv1( pExtreme[1], pProj[1] );
+ double d0 = vDiv0.Magnitude();
+ double d1 = isProjected[1] ? vDiv1.Magnitude() : 0;
+ if ( e[0]->Is( _LayerEdge::BLOCKED )) {
+ if ( e[0]->_normal * vDiv0.XYZ() < 0 ) e[0]->_len += d0;
+ else e[0]->_len -= d0;
+ }
+ if ( e[1]->Is( _LayerEdge::BLOCKED )) {
+ if ( e[1]->_normal * vDiv1.XYZ() < 0 ) e[1]->_len += d1;
+ else e[1]->_len -= d1;
+ }
- dumpCmd(SMESH_Comment("mesh.AddFace([ ")
- <<f->_nn[0]->GetID()<<", "<<f->_nn[1]->GetID()<<", "
- <<f->_nn[2]->GetID()<<", "<<f->_nn[3]->GetID()<<" ])");
- }
+ // ---------------------------------------------------------------------------------
+ // compute normalized length of the offset segments located between the projections
+ // ---------------------------------------------------------------------------------
+
+ // temporary replace extreme _offPoints by pExtreme
+ gp_XYZ opXYZ[2] = { _offPoints[ _iSeg[0] ]._xyz,
+ _offPoints[ _iSeg[1]+1 ]._xyz };
+ _offPoints[ _iSeg[0] ]._xyz = pExtreme[0].XYZ();
+ _offPoints[ _iSeg[1]+ 1]._xyz = pExtreme[1].XYZ();
+
+ size_t iSeg = 0, nbSeg = _iSeg[1] - _iSeg[0] + 1;
+ vector< double > len( nbSeg + 1 );
+ len[ iSeg++ ] = 0;
+ len[ iSeg++ ] = pProj[ 0 ].Distance( _offPoints[ _iSeg[0]+1 ]._xyz );
+ for ( size_t i = _iSeg[0]+1; i <= _iSeg[1]; ++i, ++iSeg )
+ {
+ len[ iSeg ] = len[ iSeg-1 ] + _offPoints[i].Distance( _offPoints[i+1] );
+ }
+ // if ( isProjected[ 1 ])
+ // len[ nbSeg ] -= pProj[ 1 ].Distance( _offPoints[ _iSeg[1]+1 ]._xyz );
+ // else
+ // len[ nbSeg ] += pExtreme[ 1 ].Distance( _offPoints[ _iSeg[1]+1 ]._xyz );
+
+ double fullLen = len.back() - d0 - d1;
+ for ( iSeg = 0; iSeg < len.size(); ++iSeg )
+ len[iSeg] = ( len[iSeg] - d0 ) / fullLen;
+
+ // -------------------------------------------------------------
+ // distribute tgt nodes of _LayerEdge's between the projections
+ // -------------------------------------------------------------
+
+ iSeg = 0;
+ for ( size_t i = 0; i < _eos.size(); ++i )
+ {
+ if ( _eos[i]->Is( _LayerEdge::BLOCKED )) continue;
+ //if ( !_eos[i]->Is( _LayerEdge::TO_SMOOTH )) continue;
+ while ( iSeg+2 < len.size() && _leParams[i] > len[ iSeg+1 ] )
+ iSeg++;
+ double r = ( _leParams[i] - len[ iSeg ]) / ( len[ iSeg+1 ] - len[ iSeg ]);
+ gp_XYZ p = ( _offPoints[ iSeg + _iSeg[0] ]._xyz * ( 1 - r ) +
+ _offPoints[ iSeg + _iSeg[0] + 1 ]._xyz * r );
+
+ if ( surface.IsNull() )
+ {
+ _eos[i]->_pos.back() = p;
}
- dumpFunctionEnd();
+ else // project a new node position to a FACE
+ {
+ gp_Pnt2d uv ( _eos[i]->_pos.back().X(), _eos[i]->_pos.back().Y() );
+ gp_Pnt2d uv2( surface->NextValueOfUV( uv, p, fTol ));
+
+ p = surface->Value( uv2 ).XYZ();
+ _eos[i]->_pos.back().SetCoord( uv2.X(), uv2.Y(), 0 );
+ }
+ SMDS_MeshNode* tgtNode = const_cast<SMDS_MeshNode*>( _eos[i]->_nodes.back() );
+ tgtNode->setXYZ( p.X(), p.Y(), p.Z() );
+ dumpMove( tgtNode );
}
- // Check if _LayerEdge's based on EDGE's intersects tmpFaces.
- // Perform two loops on _LayerEdge on EDGE's:
- // 1) to find and fix intersection
- // 2) to check that no new intersection appears as result of 1)
- SMDS_ElemIteratorPtr fIt( new SMDS_ElementVectorIterator( tmpFaces.begin(),
- tmpFaces.end()));
- auto_ptr<SMESH_ElementSearcher> searcher
- ( SMESH_MeshAlgos::GetElementSearcher( *getMeshDS(), fIt ));
+ _offPoints[ _iSeg[0] ]._xyz = opXYZ[0];
+ _offPoints[ _iSeg[1]+1 ]._xyz = opXYZ[1];
- // 1) Find intersections
- double dist;
- const SMDS_MeshElement* face;
- typedef map< _LayerEdge*, set< _LayerEdge*, _LayerEdgeCmp >, _LayerEdgeCmp > TLEdge2LEdgeSet;
- TLEdge2LEdgeSet edge2CloseEdge;
+ return true;
+}
+
+//================================================================================
+/*!
+ * \brief Prepare for smoothing
+ */
+//================================================================================
- const double eps = data._epsilon * data._epsilon;
- for ( size_t i = 0; i < data._edges.size(); ++i )
+void _Smoother1D::prepare(_SolidData& data)
+{
+ const TopoDS_Edge& E = TopoDS::Edge( _eos._shape );
+ _curveLen = SMESH_Algo::EdgeLength( E );
+
+ // sort _LayerEdge's by position on the EDGE
+ data.SortOnEdge( E, _eos._edges );
+
+ // compute normalized param of _eos._edges on EDGE
+ _leParams.resize( _eos._edges.size() + 1 );
{
- _LayerEdge* edge = data._edges[i];
- if (( !edge->IsOnEdge() ) &&
- ( edge->_sWOL.IsNull() || edge->_sWOL.ShapeType() != TopAbs_FACE ))
- continue;
- if ( edge->FindIntersection( *searcher, dist, eps, &face ))
+ double curLen;
+ gp_Pnt pPrev = SMESH_TNodeXYZ( getLEdgeOnV( 0 )->_nodes[0] );
+ _leParams[0] = 0;
+ for ( size_t i = 0; i < _eos._edges.size(); ++i )
{
- const _TmpMeshFaceOnEdge* f = (const _TmpMeshFaceOnEdge*) face;
- set< _LayerEdge*, _LayerEdgeCmp > & ee = edge2CloseEdge[ edge ];
- ee.insert( f->_le1 );
- ee.insert( f->_le2 );
- if ( f->_le1->IsOnEdge() && f->_le1->_sWOL.IsNull() )
- edge2CloseEdge[ f->_le1 ].insert( edge );
- if ( f->_le2->IsOnEdge() && f->_le2->_sWOL.IsNull() )
- edge2CloseEdge[ f->_le2 ].insert( edge );
+ gp_Pnt p = SMESH_TNodeXYZ( _eos._edges[i]->_nodes[0] );
+ curLen = p.Distance( pPrev );
+ _leParams[i+1] = _leParams[i] + curLen;
+ pPrev = p;
}
+ double fullLen = _leParams.back() + pPrev.Distance( SMESH_TNodeXYZ( getLEdgeOnV(1)->_nodes[0]));
+ for ( size_t i = 0; i < _leParams.size()-1; ++i )
+ _leParams[i] = _leParams[i+1] / fullLen;
+ _leParams.back() = 1.;
}
- // Set _LayerEdge._normal
+ _LayerEdge* leOnV[2] = { getLEdgeOnV(0), getLEdgeOnV(1) };
- if ( !edge2CloseEdge.empty() )
+ // get cosin to use in findEdgesToSmooth()
+ _edgeDir[0] = getEdgeDir( E, leOnV[0]->_nodes[0], data.GetHelper() );
+ _edgeDir[1] = getEdgeDir( E, leOnV[1]->_nodes[0], data.GetHelper() );
+ _leOnV[0]._cosin = Abs( leOnV[0]->_cosin );
+ _leOnV[1]._cosin = Abs( leOnV[1]->_cosin );
+ if ( _eos._sWOL.IsNull() ) // 3D
+ for ( int iEnd = 0; iEnd < 2; ++iEnd )
+ _leOnV[iEnd]._cosin = Abs( _edgeDir[iEnd].Normalized() * leOnV[iEnd]->_normal );
+
+ if ( isAnalytic() )
+ return;
+
+ // divide E to have offset segments with low deflection
+ BRepAdaptor_Curve c3dAdaptor( E );
+ const double curDeflect = 0.1; //0.01; // Curvature deflection == |p1p2]*sin(p1p2,p1pM)
+ const double angDeflect = 0.1; //0.09; // Angular deflection == sin(p1pM,pMp2)
+ GCPnts_TangentialDeflection discret(c3dAdaptor, angDeflect, curDeflect);
+ if ( discret.NbPoints() <= 2 )
+ {
+ _anaCurve = new Geom_Line( gp::OX() ); // only type does matter
+ return;
+ }
+
+ const double u0 = c3dAdaptor.FirstParameter();
+ gp_Pnt p; gp_Vec tangent;
+ if ( discret.NbPoints() >= (int) _eos.size() + 2 )
+ {
+ _offPoints.resize( discret.NbPoints() );
+ for ( size_t i = 0; i < _offPoints.size(); i++ )
+ {
+ double u = discret.Parameter( i+1 );
+ c3dAdaptor.D1( u, p, tangent );
+ _offPoints[i]._xyz = p.XYZ();
+ _offPoints[i]._edgeDir = tangent.XYZ();
+ _offPoints[i]._param = GCPnts_AbscissaPoint::Length( c3dAdaptor, u0, u ) / _curveLen;
+ }
+ }
+ else
{
- dumpFunction(SMESH_Comment("updateNormals")<<data._index);
+ std::vector< double > params( _eos.size() + 2 );
- set< TGeomID > shapesToSmooth;
+ params[0] = data.GetHelper().GetNodeU( E, leOnV[0]->_nodes[0] );
+ params.back() = data.GetHelper().GetNodeU( E, leOnV[1]->_nodes[0] );
+ for ( size_t i = 0; i < _eos.size(); i++ )
+ params[i+1] = data.GetHelper().GetNodeU( E, _eos[i]->_nodes[0] );
- // vector to store new _normal and _cosin for each edge in edge2CloseEdge
- vector< pair< _LayerEdge*, _LayerEdge > > edge2newEdge( edge2CloseEdge.size() );
+ if ( params[1] > params[ _eos.size() ] )
+ std::reverse( params.begin() + 1, params.end() - 1 );
- TLEdge2LEdgeSet::iterator e2ee = edge2CloseEdge.begin();
- for ( size_t iE = 0; e2ee != edge2CloseEdge.end(); ++e2ee, ++iE )
+ _offPoints.resize( _eos.size() + 2 );
+ for ( size_t i = 0; i < _offPoints.size(); i++ )
{
- _LayerEdge* edge1 = e2ee->first;
- _LayerEdge* edge2 = 0;
- set< _LayerEdge*, _LayerEdgeCmp >& ee = e2ee->second;
+ const double u = params[i];
+ c3dAdaptor.D1( u, p, tangent );
+ _offPoints[i]._xyz = p.XYZ();
+ _offPoints[i]._edgeDir = tangent.XYZ();
+ _offPoints[i]._param = GCPnts_AbscissaPoint::Length( c3dAdaptor, u0, u ) / _curveLen;
+ }
+ }
- edge2newEdge[ iE ].first = NULL;
+ // set _2edges
+ _offPoints [0]._2edges.set( &_leOnV[0], &_leOnV[0], 0.5, 0.5 );
+ _offPoints.back()._2edges.set( &_leOnV[1], &_leOnV[1], 0.5, 0.5 );
+ _2NearEdges tmp2edges;
+ tmp2edges._edges[1] = _eos._edges[0];
+ _leOnV[0]._2neibors = & tmp2edges;
+ _leOnV[0]._nodes = leOnV[0]->_nodes;
+ _leOnV[1]._nodes = leOnV[1]->_nodes;
+ _LayerEdge* eNext, *ePrev = & _leOnV[0];
+ for ( size_t iLE = 0, i = 1; i < _offPoints.size()-1; i++ )
+ {
+ // find _LayerEdge's located before and after an offset point
+ // (_eos._edges[ iLE ] is next after ePrev)
+ while ( iLE < _eos._edges.size() && _offPoints[i]._param > _leParams[ iLE ] )
+ ePrev = _eos._edges[ iLE++ ];
+ eNext = ePrev->_2neibors->_edges[1];
- // find EDGEs the edges reside
- // TopoDS_Edge E1, E2;
- // TopoDS_Shape S = helper.GetSubShapeByNode( edge1->_nodes[0], getMeshDS() );
- // if ( S.ShapeType() != TopAbs_EDGE )
- // continue; // TODO: find EDGE by VERTEX
- // E1 = TopoDS::Edge( S );
- set< _LayerEdge*, _LayerEdgeCmp >::iterator eIt = ee.begin();
- for ( ; !edge2 && eIt != ee.end(); ++eIt )
- {
- if ( edge1->_sWOL == (*eIt)->_sWOL )
- edge2 = *eIt;
- }
- if ( !edge2 ) continue;
+ gp_Pnt p0 = SMESH_TNodeXYZ( ePrev->_nodes[0] );
+ gp_Pnt p1 = SMESH_TNodeXYZ( eNext->_nodes[0] );
+ double r = p0.Distance( _offPoints[i]._xyz ) / p0.Distance( p1 );
+ _offPoints[i]._2edges.set( ePrev, eNext, 1-r, r );
+ }
- edge2newEdge[ iE ].first = edge1;
- _LayerEdge& newEdge = edge2newEdge[ iE ].second;
- // while ( E2.IsNull() && eIt != ee.end())
- // {
- // _LayerEdge* e2 = *eIt++;
- // TopoDS_Shape S = helper.GetSubShapeByNode( e2->_nodes[0], getMeshDS() );
- // if ( S.ShapeType() == TopAbs_EDGE )
- // E2 = TopoDS::Edge( S ), edge2 = e2;
- // }
- // if ( E2.IsNull() ) continue; // TODO: find EDGE by VERTEX
+ // replace _LayerEdge's on VERTEX by _leOnV in _offPoints._2edges
+ for ( size_t i = 0; i < _offPoints.size(); i++ )
+ if ( _offPoints[i]._2edges._edges[0] == leOnV[0] )
+ _offPoints[i]._2edges._edges[0] = & _leOnV[0];
+ else break;
+ for ( size_t i = _offPoints.size()-1; i > 0; i-- )
+ if ( _offPoints[i]._2edges._edges[1] == leOnV[1] )
+ _offPoints[i]._2edges._edges[1] = & _leOnV[1];
+ else break;
- // find 3 FACEs sharing 2 EDGEs
+ // set _normal of _leOnV[0] and _leOnV[1] to be normal to the EDGE
- // TopoDS_Face FF1[2], FF2[2];
- // PShapeIteratorPtr fIt = helper.GetAncestors(E1, *_mesh, TopAbs_FACE);
- // while ( fIt->more() && FF1[1].IsNull() )
- // {
- // const TopoDS_Face *F = (const TopoDS_Face*) fIt->next();
- // if ( helper.IsSubShape( *F, data._solid))
- // FF1[ FF1[0].IsNull() ? 0 : 1 ] = *F;
- // }
- // fIt = helper.GetAncestors(E2, *_mesh, TopAbs_FACE);
- // while ( fIt->more() && FF2[1].IsNull())
- // {
- // const TopoDS_Face *F = (const TopoDS_Face*) fIt->next();
- // if ( helper.IsSubShape( *F, data._solid))
- // FF2[ FF2[0].IsNull() ? 0 : 1 ] = *F;
- // }
- // // exclude a FACE common to E1 and E2 (put it to FFn[1] )
- // if ( FF1[0].IsSame( FF2[0]) || FF1[0].IsSame( FF2[1]))
- // std::swap( FF1[0], FF1[1] );
- // if ( FF2[0].IsSame( FF1[0]) )
- // std::swap( FF2[0], FF2[1] );
- // if ( FF1[0].IsNull() || FF2[0].IsNull() )
- // continue;
-
- // get a new normal for edge1
- //bool ok;
- gp_Vec dir1 = edge1->_normal, dir2 = edge2->_normal;
- // if ( edge1->_cosin < 0 )
- // dir1 = getFaceDir( FF1[0], E1, edge1->_nodes[0], helper, ok ).Normalized();
- // if ( edge2->_cosin < 0 )
- // dir2 = getFaceDir( FF2[0], E2, edge2->_nodes[0], helper, ok ).Normalized();
-
- double cos1 = Abs( edge1->_cosin ), cos2 = Abs( edge2->_cosin );
- double wgt1 = ( cos1 + 0.001 ) / ( cos1 + cos2 + 0.002 );
- double wgt2 = ( cos2 + 0.001 ) / ( cos1 + cos2 + 0.002 );
- newEdge._normal = ( wgt1 * dir1 + wgt2 * dir2 ).XYZ();
- newEdge._normal.Normalize();
+ int iLBO = _offPoints.size() - 2; // last but one
- // cout << edge1->_nodes[0]->GetID() << " "
- // << edge2->_nodes[0]->GetID() << " NORM: "
- // << newEdge._normal.X() << ", " << newEdge._normal.Y() << ", " << newEdge._normal.Z() << endl;
+ if ( leOnV[ 0 ]->Is( _LayerEdge::MULTI_NORMAL ))
+ _leOnV[ 0 ]._normal = getNormalNormal( _eos._edges[1]->_normal, _edgeDir[0] );
+ else
+ _leOnV[ 0 ]._normal = getNormalNormal( leOnV[0]->_normal, _edgeDir[0] );
+ if ( leOnV[ 1 ]->Is( _LayerEdge::MULTI_NORMAL ))
+ _leOnV[ 1 ]._normal = getNormalNormal( _eos._edges.back()->_normal, _edgeDir[1] );
+ else
+ _leOnV[ 1 ]._normal = getNormalNormal( leOnV[1]->_normal, _edgeDir[1] );
+ _leOnV[ 0 ]._len = 0;
+ _leOnV[ 1 ]._len = 0;
+ _leOnV[ 0 ]._lenFactor = _offPoints[1 ]._2edges._edges[1]->_lenFactor;
+ _leOnV[ 1 ]._lenFactor = _offPoints[iLBO]._2edges._edges[0]->_lenFactor;
- // get new cosin
- if ( cos1 < theMinSmoothCosin )
- {
- newEdge._cosin = edge2->_cosin;
- }
- else if ( cos2 > theMinSmoothCosin ) // both cos1 and cos2 > theMinSmoothCosin
- {
- // gp_Vec dirInFace;
- // if ( edge1->_cosin < 0 )
- // dirInFace = dir1;
- // else
- // dirInFace = getFaceDir( FF1[0], E1, edge1->_nodes[0], helper, ok );
- // double angle = dirInFace.Angle( edge1->_normal ); // [0,PI]
- // edge1->SetCosin( Cos( angle ));
- //newEdge._cosin = 0; // ???????????
- newEdge._cosin = ( wgt1 * cos1 + wgt2 * cos2 ) * edge1->_cosin / cos1;
- }
- else
- {
- newEdge._cosin = edge1->_cosin;
- }
+ _iSeg[0] = 0;
+ _iSeg[1] = _offPoints.size()-2;
- // find shapes that need smoothing due to change of _normal
- if ( edge1->_cosin < theMinSmoothCosin &&
- newEdge._cosin > theMinSmoothCosin )
- {
- if ( edge1->_sWOL.IsNull() )
- {
- SMDS_ElemIteratorPtr fIt = edge1->_nodes[0]->GetInverseElementIterator(SMDSAbs_Face);
- while ( fIt->more() )
- shapesToSmooth.insert( fIt->next()->getshapeId() );
- //limitStepSize( data, fIt->next(), edge1->_cosin ); // too late
- }
- else // edge1 inflates along a FACE
- {
- TopoDS_Shape V = helper.GetSubShapeByNode( edge1->_nodes[0], getMeshDS() );
- PShapeIteratorPtr eIt = helper.GetAncestors( V, *_mesh, TopAbs_EDGE );
- while ( const TopoDS_Shape* E = eIt->next() )
- {
- if ( !helper.IsSubShape( *E, /*FACE=*/edge1->_sWOL ))
- continue;
- gp_Vec edgeDir = getEdgeDir( TopoDS::Edge( *E ), TopoDS::Vertex( V ));
- double angle = edgeDir.Angle( newEdge._normal ); // [0,PI]
- if ( angle < M_PI / 2 )
- shapesToSmooth.insert( getMeshDS()->ShapeToIndex( *E ));
- }
- }
- }
+ // initialize OffPnt::_len
+ for ( size_t i = 0; i < _offPoints.size(); ++i )
+ _offPoints[i]._len = 0;
+
+ if ( _eos._edges[0]->NbSteps() > 1 ) // already inflated several times, init _xyz
+ {
+ _leOnV[0]._len = leOnV[0]->_len;
+ _leOnV[1]._len = leOnV[1]->_len;
+ for ( size_t i = 0; i < _offPoints.size(); i++ )
+ {
+ _LayerEdge* e0 = _offPoints[i]._2edges._edges[0];
+ _LayerEdge* e1 = _offPoints[i]._2edges._edges[1];
+ const double w0 = _offPoints[i]._2edges._wgt[0];
+ const double w1 = _offPoints[i]._2edges._wgt[1];
+ double avgLen = ( e0->_len * w0 + e1->_len * w1 );
+ gp_XYZ avgXYZ = ( SMESH_TNodeXYZ( e0->_nodes.back() ) * w0 +
+ SMESH_TNodeXYZ( e1->_nodes.back() ) * w1 );
+ _offPoints[i]._xyz = avgXYZ;
+ _offPoints[i]._len = avgLen;
}
+ }
+}
- data.AddShapesToSmooth( shapesToSmooth );
+//================================================================================
+/*!
+ * \brief return _normal of _leOnV[is2nd] normal to the EDGE
+ */
+//================================================================================
- // Update data of edges depending on a new _normal
+gp_XYZ _Smoother1D::getNormalNormal( const gp_XYZ & normal,
+ const gp_XYZ& edgeDir)
+{
+ gp_XYZ cross = normal ^ edgeDir;
+ gp_XYZ norm = edgeDir ^ cross;
+ double size = norm.Modulus();
- for ( size_t iE = 0; iE < edge2newEdge.size(); ++iE )
- {
- _LayerEdge* edge1 = edge2newEdge[ iE ].first;
- _LayerEdge& newEdge = edge2newEdge[ iE ].second;
- if ( !edge1 ) continue;
+ // if ( size == 0 ) // MULTI_NORMAL _LayerEdge
+ // return gp_XYZ( 1e-100, 1e-100, 1e-100 );
- edge1->_normal = newEdge._normal;
- edge1->SetCosin( newEdge._cosin );
- edge1->InvalidateStep( 1 );
- edge1->_len = 0;
- edge1->SetNewLength( data._stepSize, helper );
- if ( edge1->IsOnEdge() )
- {
- const SMDS_MeshNode * n1 = edge1->_2neibors->srcNode(0);
- const SMDS_MeshNode * n2 = edge1->_2neibors->srcNode(1);
- edge1->SetDataByNeighbors( n1, n2, helper );
- }
+ return norm / size;
+}
- // Update normals and other dependent data of not intersecting _LayerEdge's
- // neighboring the intersecting ones
+//================================================================================
+/*!
+ * \brief Writes a script creating a mesh composed of _offPoints
+ */
+//================================================================================
- if ( !edge1->_2neibors )
- continue;
- for ( int j = 0; j < 2; ++j ) // loop on 2 neighbors
- {
- _LayerEdge* neighbor = edge1->_2neibors->_edges[j];
- if ( edge2CloseEdge.count ( neighbor ))
- continue; // j-th neighbor is also intersected
- _LayerEdge* prevEdge = edge1;
- const int nbSteps = 10;
- for ( int step = nbSteps; step; --step ) // step from edge1 in j-th direction
- {
- if ( !neighbor->_2neibors )
- break; // neighbor is on VERTEX
- int iNext = 0;
- _LayerEdge* nextEdge = neighbor->_2neibors->_edges[iNext];
- if ( nextEdge == prevEdge )
- nextEdge = neighbor->_2neibors->_edges[ ++iNext ];
- double r = double(step-1)/nbSteps;
- if ( !nextEdge->_2neibors )
- r = 0.5;
+void _Smoother1D::offPointsToPython() const
+{
+ const char* fname = "/tmp/offPoints.py";
+ cout << "exec(open('"<<fname<<"','rb').read() )"<<endl;
+ ofstream py(fname);
+ py << "import SMESH" << endl
+ << "from salome.smesh import smeshBuilder" << endl
+ << "smesh = smeshBuilder.New(salome.myStudy)" << endl
+ << "mesh = smesh.Mesh( 'offPoints' )"<<endl;
+ for ( size_t i = 0; i < _offPoints.size(); i++ )
+ {
+ py << "mesh.AddNode( "
+ << _offPoints[i]._xyz.X() << ", "
+ << _offPoints[i]._xyz.Y() << ", "
+ << _offPoints[i]._xyz.Z() << " )" << endl;
+ }
+}
- gp_XYZ newNorm = prevEdge->_normal * r + nextEdge->_normal * (1-r);
- newNorm.Normalize();
+//================================================================================
+/*!
+ * \brief Sort _LayerEdge's by a parameter on a given EDGE
+ */
+//================================================================================
- neighbor->_normal = newNorm;
- neighbor->SetCosin( prevEdge->_cosin * r + nextEdge->_cosin * (1-r) );
- neighbor->SetDataByNeighbors( prevEdge->_nodes[0], nextEdge->_nodes[0], helper );
+void _SolidData::SortOnEdge( const TopoDS_Edge& E,
+ vector< _LayerEdge* >& edges)
+{
+ map< double, _LayerEdge* > u2edge;
+ for ( size_t i = 0; i < edges.size(); ++i )
+ u2edge.insert( u2edge.end(),
+ make_pair( _helper->GetNodeU( E, edges[i]->_nodes[0] ), edges[i] ));
- neighbor->InvalidateStep( 1 );
- neighbor->_len = 0;
- neighbor->SetNewLength( data._stepSize, helper );
+ ASSERT( u2edge.size() == edges.size() );
+ map< double, _LayerEdge* >::iterator u2e = u2edge.begin();
+ for ( size_t i = 0; i < edges.size(); ++i, ++u2e )
+ edges[i] = u2e->second;
- // goto the next neighbor
- prevEdge = neighbor;
- neighbor = nextEdge;
- }
- }
- }
- dumpFunctionEnd();
- }
- // 2) Check absence of intersections
- // TODO?
+ Sort2NeiborsOnEdge( edges );
+}
- for ( size_t i = 0 ; i < tmpFaces.size(); ++i )
- delete tmpFaces[i];
+//================================================================================
+/*!
+ * \brief Set _2neibors according to the order of _LayerEdge on EDGE
+ */
+//================================================================================
- return true;
+void _SolidData::Sort2NeiborsOnEdge( vector< _LayerEdge* >& edges )
+{
+ if ( edges.size() < 2 || !edges[0]->_2neibors ) return;
+
+ for ( size_t i = 0; i < edges.size()-1; ++i )
+ if ( edges[i]->_2neibors->tgtNode(1) != edges[i+1]->_nodes.back() )
+ edges[i]->_2neibors->reverse();
+
+ const size_t iLast = edges.size() - 1;
+ if ( edges.size() > 1 &&
+ edges[iLast]->_2neibors->tgtNode(0) != edges[iLast-1]->_nodes.back() )
+ edges[iLast]->_2neibors->reverse();
}
//================================================================================
/*!
- * \brief Modify normals of _LayerEdge's on _ConvexFace's
+ * \brief Return _EdgesOnShape* corresponding to the shape
*/
//================================================================================
-bool _ViscousBuilder::updateNormalsOfConvexFaces( _SolidData& data,
- SMESH_MesherHelper& helper,
- int stepNb )
+_EdgesOnShape* _SolidData::GetShapeEdges(const TGeomID shapeID )
{
- SMESHDS_Mesh* meshDS = helper.GetMeshDS();
- bool isOK;
+ if ( shapeID < (int)_edgesOnShape.size() &&
+ _edgesOnShape[ shapeID ]._shapeID == shapeID )
+ return _edgesOnShape[ shapeID ]._subMesh ? & _edgesOnShape[ shapeID ] : 0;
- map< TGeomID, _ConvexFace >::iterator id2face = data._convexFaces.begin();
- for ( ; id2face != data._convexFaces.end(); ++id2face )
- {
- _ConvexFace & convFace = (*id2face).second;
- if ( convFace._normalsFixed )
- continue; // already fixed
- if ( convFace.CheckPrisms() )
- continue; // nothing to fix
+ for ( size_t i = 0; i < _edgesOnShape.size(); ++i )
+ if ( _edgesOnShape[i]._shapeID == shapeID )
+ return _edgesOnShape[i]._subMesh ? & _edgesOnShape[i] : 0;
- convFace._normalsFixed = true;
+ return 0;
+}
- BRepAdaptor_Surface surface ( convFace._face, false );
- BRepLProp_SLProps surfProp( surface, 2, 1e-6 );
+//================================================================================
+/*!
+ * \brief Return _EdgesOnShape* corresponding to the shape
+ */
+//================================================================================
- // check if the convex FACE is of spherical shape
+_EdgesOnShape* _SolidData::GetShapeEdges(const TopoDS_Shape& shape )
+{
+ SMESHDS_Mesh* meshDS = _proxyMesh->GetMesh()->GetMeshDS();
+ return GetShapeEdges( meshDS->ShapeToIndex( shape ));
+}
- Bnd_B3d centersBox; // bbox of centers of curvature of _LayerEdge's on VERTEXes
- Bnd_B3d nodesBox;
- gp_Pnt center;
- int iBeg, iEnd;
+//================================================================================
+/*!
+ * \brief Prepare data of the _LayerEdge for smoothing on FACE
+ */
+//================================================================================
- map< TGeomID, int >::iterator id2end = convFace._subIdToEdgeEnd.begin();
- for ( ; id2end != convFace._subIdToEdgeEnd.end(); ++id2end )
+void _SolidData::PrepareEdgesToSmoothOnFace( _EdgesOnShape* eos, bool substituteSrcNodes )
+{
+ SMESH_MesherHelper helper( *_proxyMesh->GetMesh() );
+
+ set< TGeomID > vertices;
+ TopoDS_Face F;
+ if ( eos->ShapeType() == TopAbs_FACE )
+ {
+ // check FACE concavity and get concave VERTEXes
+ F = TopoDS::Face( eos->_shape );
+ if ( isConcave( F, helper, &vertices ))
+ _concaveFaces.insert( eos->_shapeID );
+
+ // set eos._eosConcaVer
+ eos->_eosConcaVer.clear();
+ eos->_eosConcaVer.reserve( vertices.size() );
+ for ( set< TGeomID >::iterator v = vertices.begin(); v != vertices.end(); ++v )
+ {
+ _EdgesOnShape* eov = GetShapeEdges( *v );
+ if ( eov && eov->_edges.size() == 1 )
+ {
+ eos->_eosConcaVer.push_back( eov );
+ for ( size_t i = 0; i < eov->_edges[0]->_neibors.size(); ++i )
+ eov->_edges[0]->_neibors[i]->Set( _LayerEdge::DIFFICULT );
+ }
+ }
+
+ // SetSmooLen() to _LayerEdge's on FACE
+ // for ( size_t i = 0; i < eos->_edges.size(); ++i )
+ // {
+ // eos->_edges[i]->SetSmooLen( Precision::Infinite() );
+ // }
+ // SMESH_subMeshIteratorPtr smIt = eos->_subMesh->getDependsOnIterator(/*includeSelf=*/false);
+ // while ( smIt->more() ) // loop on sub-shapes of the FACE
+ // {
+ // _EdgesOnShape* eoe = GetShapeEdges( smIt->next()->GetId() );
+ // if ( !eoe ) continue;
+
+ // vector<_LayerEdge*>& eE = eoe->_edges;
+ // for ( size_t iE = 0; iE < eE.size(); ++iE ) // loop on _LayerEdge's on EDGE or VERTEX
+ // {
+ // if ( eE[iE]->_cosin <= theMinSmoothCosin )
+ // continue;
+
+ // SMDS_ElemIteratorPtr segIt = eE[iE]->_nodes[0]->GetInverseElementIterator(SMDSAbs_Edge);
+ // while ( segIt->more() )
+ // {
+ // const SMDS_MeshElement* seg = segIt->next();
+ // if ( !eos->_subMesh->DependsOn( seg->getshapeId() ))
+ // continue;
+ // if ( seg->GetNode(0) != eE[iE]->_nodes[0] )
+ // continue; // not to check a seg twice
+ // for ( size_t iN = 0; iN < eE[iE]->_neibors.size(); ++iN )
+ // {
+ // _LayerEdge* eN = eE[iE]->_neibors[iN];
+ // if ( eN->_nodes[0]->getshapeId() != eos->_shapeID )
+ // continue;
+ // double dist = SMESH_MeshAlgos::GetDistance( seg, SMESH_TNodeXYZ( eN->_nodes[0] ));
+ // double smooLen = getSmoothingThickness( eE[iE]->_cosin, dist );
+ // eN->SetSmooLen( Min( smooLen, eN->GetSmooLen() ));
+ // eN->Set( _LayerEdge::NEAR_BOUNDARY );
+ // }
+ // }
+ // }
+ // }
+ } // if ( eos->ShapeType() == TopAbs_FACE )
+
+ for ( size_t i = 0; i < eos->_edges.size(); ++i )
+ {
+ eos->_edges[i]->_smooFunction = 0;
+ eos->_edges[i]->Set( _LayerEdge::TO_SMOOTH );
+ }
+ bool isCurved = false;
+ for ( size_t i = 0; i < eos->_edges.size(); ++i )
+ {
+ _LayerEdge* edge = eos->_edges[i];
+
+ // get simplices sorted
+ _Simplex::SortSimplices( edge->_simplices );
+
+ // smoothing function
+ edge->ChooseSmooFunction( vertices, _n2eMap );
+
+ // set _curvature
+ double avgNormProj = 0, avgLen = 0;
+ for ( size_t iS = 0; iS < edge->_simplices.size(); ++iS )
{
- data.GetEdgesOnShape( id2end->second, iBeg, iEnd );
+ _Simplex& s = edge->_simplices[iS];
- if ( meshDS->IndexToShape( id2end->first ).ShapeType() == TopAbs_VERTEX )
+ gp_XYZ vec = edge->_pos.back() - SMESH_TNodeXYZ( s._nPrev );
+ avgNormProj += edge->_normal * vec;
+ avgLen += vec.Modulus();
+ if ( substituteSrcNodes )
{
- _LayerEdge* ledge = data._edges[ iBeg ];
- if ( convFace.GetCenterOfCurvature( ledge, surfProp, helper, center ))
- centersBox.Add( center );
+ s._nNext = _n2eMap[ s._nNext ]->_nodes.back();
+ s._nPrev = _n2eMap[ s._nPrev ]->_nodes.back();
}
- for ( ; iBeg < iEnd; ++iBeg )
- nodesBox.Add( SMESH_TNodeXYZ( data._edges[ iBeg ]->_nodes[0] ));
}
- if ( centersBox.IsVoid() )
+ avgNormProj /= edge->_simplices.size();
+ avgLen /= edge->_simplices.size();
+ if (( edge->_curvature = _Curvature::New( avgNormProj, avgLen )))
{
- debugMsg( "Error: centersBox.IsVoid()" );
- return false;
+ edge->Set( _LayerEdge::SMOOTHED_C1 );
+ isCurved = true;
+ SMDS_FacePositionPtr fPos = edge->_nodes[0]->GetPosition();
+ if ( !fPos )
+ for ( size_t iS = 0; iS < edge->_simplices.size() && !fPos; ++iS )
+ fPos = edge->_simplices[iS]._nPrev->GetPosition();
+ if ( fPos )
+ edge->_curvature->_uv.SetCoord( fPos->GetUParameter(), fPos->GetVParameter() );
}
- const bool isSpherical =
- ( centersBox.SquareExtent() < 1e-6 * nodesBox.SquareExtent() );
+ }
- int nbEdges = helper.Count( convFace._face, TopAbs_EDGE, /*ignoreSame=*/false );
- vector < _CentralCurveOnEdge > centerCurves( nbEdges );
+ // prepare for putOnOffsetSurface()
+ if (( eos->ShapeType() == TopAbs_FACE ) &&
+ ( isCurved || !eos->_eosConcaVer.empty() ))
+ {
+ eos->_offsetSurf = helper.GetSurface( TopoDS::Face( eos->_shape ));
+ eos->_edgeForOffset = 0;
- if ( isSpherical )
+ double maxCosin = -1;
+ for ( TopExp_Explorer eExp( eos->_shape, TopAbs_EDGE ); eExp.More(); eExp.Next() )
{
- // set _LayerEdge::_normal as average of all normals
-
- // WARNING: different density of nodes on EDGEs is not taken into account that
- // can lead to an improper new normal
+ _EdgesOnShape* eoe = GetShapeEdges( eExp.Current() );
+ if ( !eoe || eoe->_edges.empty() ) continue;
- gp_XYZ avgNormal( 0,0,0 );
- nbEdges = 0;
- id2end = convFace._subIdToEdgeEnd.begin();
- for ( ; id2end != convFace._subIdToEdgeEnd.end(); ++id2end )
- {
- data.GetEdgesOnShape( id2end->second, iBeg, iEnd );
- // set data of _CentralCurveOnEdge
- const TopoDS_Shape& S = meshDS->IndexToShape( id2end->first );
- if ( S.ShapeType() == TopAbs_EDGE )
- {
- _CentralCurveOnEdge& ceCurve = centerCurves[ nbEdges++ ];
- ceCurve.SetShapes( TopoDS::Edge(S), convFace, data, helper );
- if ( !data._edges[ iBeg ]->_sWOL.IsNull() )
- ceCurve._adjFace.Nullify();
- else
- ceCurve._ledges.insert( ceCurve._ledges.end(),
- &data._edges[ iBeg ], &data._edges[ iEnd ]);
- }
- // summarize normals
- for ( ; iBeg < iEnd; ++iBeg )
- avgNormal += data._edges[ iBeg ]->_normal;
- }
- double normSize = avgNormal.SquareModulus();
- if ( normSize < 1e-200 )
+ vector<_LayerEdge*>& eE = eoe->_edges;
+ _LayerEdge* e = eE[ eE.size() / 2 ];
+ if ( e->_cosin > maxCosin )
{
- debugMsg( "updateNormalsOfConvexFaces(): zero avgNormal" );
- return false;
+ eos->_edgeForOffset = e;
+ maxCosin = e->_cosin;
}
- avgNormal /= Sqrt( normSize );
+ }
+ }
+}
- // compute new _LayerEdge::_cosin on EDGEs
- double avgCosin = 0;
- int nbCosin = 0;
- gp_Vec inFaceDir;
- for ( size_t iE = 0; iE < centerCurves.size(); ++iE )
+//================================================================================
+/*!
+ * \brief Add faces for smoothing
+ */
+//================================================================================
+
+void _SolidData::AddShapesToSmooth( const set< _EdgesOnShape* >& eosToSmooth,
+ const set< _EdgesOnShape* >* edgesNoAnaSmooth )
+{
+ set< _EdgesOnShape * >::const_iterator eos = eosToSmooth.begin();
+ for ( ; eos != eosToSmooth.end(); ++eos )
+ {
+ if ( !*eos || (*eos)->_toSmooth ) continue;
+
+ (*eos)->_toSmooth = true;
+
+ if ( (*eos)->ShapeType() == TopAbs_FACE )
+ {
+ PrepareEdgesToSmoothOnFace( *eos, /*substituteSrcNodes=*/false );
+ (*eos)->_toSmooth = true;
+ }
+ }
+
+ // avoid _Smoother1D::smoothAnalyticEdge() of edgesNoAnaSmooth
+ if ( edgesNoAnaSmooth )
+ for ( eos = edgesNoAnaSmooth->begin(); eos != edgesNoAnaSmooth->end(); ++eos )
+ {
+ if ( (*eos)->_edgeSmoother )
+ (*eos)->_edgeSmoother->_anaCurve.Nullify();
+ }
+}
+
+//================================================================================
+/*!
+ * \brief Limit _LayerEdge::_maxLen according to local curvature
+ */
+//================================================================================
+
+void _ViscousBuilder::limitMaxLenByCurvature( _SolidData& data, SMESH_MesherHelper& /*helper*/ )
+{
+ // find intersection of neighbor _LayerEdge's to limit _maxLen
+ // according to local curvature (IPAL52648)
+
+ // This method must be called after findCollisionEdges() where _LayerEdge's
+ // get _lenFactor initialized in the case of eos._hyp.IsOffsetMethod()
+
+ for ( size_t iS = 0; iS < data._edgesOnShape.size(); ++iS )
+ {
+ _EdgesOnShape& eosI = data._edgesOnShape[iS];
+ if ( eosI._edges.empty() ) continue;
+ if ( !eosI._hyp.ToSmooth() )
+ {
+ for ( size_t i = 0; i < eosI._edges.size(); ++i )
{
- _CentralCurveOnEdge& ceCurve = centerCurves[ iE ];
- if ( ceCurve._adjFace.IsNull() )
- continue;
- for ( size_t iLE = 0; iLE < ceCurve._ledges.size(); ++iLE )
+ _LayerEdge* eI = eosI._edges[i];
+ for ( size_t iN = 0; iN < eI->_neibors.size(); ++iN )
{
- const SMDS_MeshNode* node = ceCurve._ledges[ iLE ]->_nodes[0];
- inFaceDir = getFaceDir( ceCurve._adjFace, ceCurve._edge, node, helper, isOK );
- if ( isOK )
+ _LayerEdge* eN = eI->_neibors[iN];
+ if ( eI->_nodes[0]->GetID() < eN->_nodes[0]->GetID() ) // treat this pair once
{
- double angle = inFaceDir.Angle( avgNormal ); // [0,PI]
- ceCurve._ledges[ iLE ]->_cosin = Cos( angle );
- avgCosin += ceCurve._ledges[ iLE ]->_cosin;
- nbCosin++;
+ _EdgesOnShape* eosN = data.GetShapeEdges( eN );
+ limitMaxLenByCurvature( eI, eN, eosI, *eosN, eosI._hyp.ToSmooth() );
}
}
}
- if ( nbCosin > 0 )
- avgCosin /= nbCosin;
+ }
+ else if ( eosI.ShapeType() == TopAbs_EDGE )
+ {
+ const TopoDS_Edge& E = TopoDS::Edge( eosI._shape );
+ if ( SMESH_Algo::IsStraight( E, /*degenResult=*/true )) continue;
- // set _LayerEdge::_normal = avgNormal
- id2end = convFace._subIdToEdgeEnd.begin();
- for ( ; id2end != convFace._subIdToEdgeEnd.end(); ++id2end )
+ _LayerEdge* e0 = eosI._edges[0];
+ for ( size_t i = 1; i < eosI._edges.size(); ++i )
{
- data.GetEdgesOnShape( id2end->second, iBeg, iEnd );
- const TopoDS_Shape& S = meshDS->IndexToShape( id2end->first );
- if ( S.ShapeType() != TopAbs_EDGE )
- for ( int i = iBeg; i < iEnd; ++i )
- data._edges[ i ]->_cosin = avgCosin;
+ _LayerEdge* eI = eosI._edges[i];
+ limitMaxLenByCurvature( eI, e0, eosI, eosI, eosI._hyp.ToSmooth() );
+ e0 = eI;
+ }
+ }
+ }
+}
+
+//================================================================================
+/*!
+ * \brief Limit _LayerEdge::_maxLen according to local curvature
+ */
+//================================================================================
+
+void _ViscousBuilder::limitMaxLenByCurvature( _LayerEdge* e1,
+ _LayerEdge* e2,
+ _EdgesOnShape& /*eos1*/,
+ _EdgesOnShape& /*eos2*/,
+ const bool /*isSmoothable*/ )
+{
+ if (( e1->_nodes[0]->GetPosition()->GetDim() !=
+ e2->_nodes[0]->GetPosition()->GetDim() ) &&
+ ( e1->_cosin < 0.75 ))
+ return; // angle > 90 deg at e1
+
+ gp_XYZ plnNorm = e1->_normal ^ e2->_normal;
+ double norSize = plnNorm.SquareModulus();
+ if ( norSize < std::numeric_limits<double>::min() )
+ return; // parallel normals
+
+ // find closest points of skew _LayerEdge's
+ SMESH_TNodeXYZ src1( e1->_nodes[0] ), src2( e2->_nodes[0] );
+ gp_XYZ dir12 = src2 - src1;
+ gp_XYZ perp1 = e1->_normal ^ plnNorm;
+ gp_XYZ perp2 = e2->_normal ^ plnNorm;
+ double dot1 = perp2 * e1->_normal;
+ double dot2 = perp1 * e2->_normal;
+ double u1 = ( perp2 * dir12 ) / dot1;
+ double u2 = - ( perp1 * dir12 ) / dot2;
+ if ( u1 > 0 && u2 > 0 )
+ {
+ double ovl = ( u1 * e1->_normal * dir12 -
+ u2 * e2->_normal * dir12 ) / dir12.SquareModulus();
+ if ( ovl > theSmoothThickToElemSizeRatio )
+ {
+ const double coef = 0.75;
+ e1->SetMaxLen( Min( e1->_maxLen, coef * u1 / e1->_lenFactor ));
+ e2->SetMaxLen( Min( e2->_maxLen, coef * u2 / e2->_lenFactor ));
+ }
+ }
+}
+
+//================================================================================
+/*!
+ * \brief Fill data._collisionEdges
+ */
+//================================================================================
+
+void _ViscousBuilder::findCollisionEdges( _SolidData& data, SMESH_MesherHelper& helper )
+{
+ data._collisionEdges.clear();
+
+ // set the full thickness of the layers to LEs
+ for ( size_t iS = 0; iS < data._edgesOnShape.size(); ++iS )
+ {
+ _EdgesOnShape& eos = data._edgesOnShape[iS];
+ if ( eos._edges.empty() ) continue;
+ if ( eos.ShapeType() != TopAbs_EDGE && eos.ShapeType() != TopAbs_VERTEX ) continue;
+ if ( !eos._sWOL.IsNull() ) continue; // PAL23566
+
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ {
+ if ( eos._edges[i]->Is( _LayerEdge::BLOCKED )) continue;
+ double maxLen = eos._edges[i]->_maxLen;
+ eos._edges[i]->_maxLen = Precision::Infinite(); // avoid blocking
+ eos._edges[i]->SetNewLength( 1.5 * maxLen, eos, helper );
+ eos._edges[i]->_maxLen = maxLen;
+ }
+ }
- for ( ; iBeg < iEnd; ++iBeg )
- data._edges[ iBeg ]->_normal = avgNormal;
+ // make temporary quadrangles got by extrusion of
+ // mesh edges along _LayerEdge._normal's
+
+ vector< const SMDS_MeshElement* > tmpFaces;
+
+ for ( size_t iS = 0; iS < data._edgesOnShape.size(); ++iS )
+ {
+ _EdgesOnShape& eos = data._edgesOnShape[ iS ];
+ if ( eos.ShapeType() != TopAbs_EDGE )
+ continue;
+ if ( eos._edges.empty() )
+ {
+ _LayerEdge* edge[2] = { 0, 0 }; // LE of 2 VERTEX'es
+ SMESH_subMeshIteratorPtr smIt = eos._subMesh->getDependsOnIterator(/*includeSelf=*/false);
+ while ( smIt->more() )
+ if ( _EdgesOnShape* eov = data.GetShapeEdges( smIt->next()->GetId() ))
+ if ( eov->_edges.size() == 1 )
+ edge[ bool( edge[0]) ] = eov->_edges[0];
+
+ if ( edge[1] )
+ {
+ _TmpMeshFaceOnEdge* f = new _TmpMeshFaceOnEdge( edge[0], edge[1], --_tmpFaceID );
+ tmpFaces.push_back( f );
}
}
- else // if ( isSpherical )
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
{
- // We suppose that centers of curvature at all points of the FACE
- // lie on some curve, let's call it "central curve". For all _LayerEdge's
- // having a common center of curvature we define the same new normal
- // as a sum of normals of _LayerEdge's on EDGEs among them.
+ _LayerEdge* edge = eos._edges[i];
+ for ( int j = 0; j < 2; ++j ) // loop on _2NearEdges
+ {
+ const SMDS_MeshNode* src2 = edge->_2neibors->srcNode(j);
+ if ( src2->GetPosition()->GetDim() > 0 &&
+ src2->GetID() < edge->_nodes[0]->GetID() )
+ continue; // avoid using same segment twice
- // get all centers of curvature for each EDGE
+ // a _LayerEdge containing tgt2
+ _LayerEdge* neiborEdge = edge->_2neibors->_edges[j];
- helper.SetSubShape( convFace._face );
- _LayerEdge* vertexLEdges[2], **edgeLEdge, **edgeLEdgeEnd;
+ _TmpMeshFaceOnEdge* f = new _TmpMeshFaceOnEdge( edge, neiborEdge, --_tmpFaceID );
+ tmpFaces.push_back( f );
+ }
+ }
+ }
- TopExp_Explorer edgeExp( convFace._face, TopAbs_EDGE );
- for ( int iE = 0; edgeExp.More(); edgeExp.Next(), ++iE )
+ // Find _LayerEdge's intersecting tmpFaces.
+
+ SMDS_ElemIteratorPtr fIt( new SMDS_ElementVectorIterator( tmpFaces.begin(),
+ tmpFaces.end()));
+ SMESHUtils::Deleter<SMESH_ElementSearcher> searcher
+ ( SMESH_MeshAlgos::GetElementSearcher( *getMeshDS(), fIt ));
+
+ double dist1, dist2, segLen, eps = 0.5;
+ _CollisionEdges collEdges;
+ vector< const SMDS_MeshElement* > suspectFaces;
+ const double angle45 = Cos( 45. * M_PI / 180. );
+
+ for ( size_t iS = 0; iS < data._edgesOnShape.size(); ++iS )
+ {
+ _EdgesOnShape& eos = data._edgesOnShape[ iS ];
+ if ( eos.ShapeType() == TopAbs_FACE || !eos._sWOL.IsNull() )
+ continue;
+ // find sub-shapes whose VL can influence VL on eos
+ set< TGeomID > neighborShapes;
+ PShapeIteratorPtr fIt = helper.GetAncestors( eos._shape, *_mesh, TopAbs_FACE );
+ while ( const TopoDS_Shape* face = fIt->next() )
+ {
+ TGeomID faceID = getMeshDS()->ShapeToIndex( *face );
+ if ( _EdgesOnShape* eof = data.GetShapeEdges( faceID ))
{
- const TopoDS_Edge& edge = TopoDS::Edge( edgeExp.Current() );
+ SMESH_subMeshIteratorPtr subIt = eof->_subMesh->getDependsOnIterator(/*includeSelf=*/false);
+ while ( subIt->more() )
+ neighborShapes.insert( subIt->next()->GetId() );
+ }
+ }
+ if ( eos.ShapeType() == TopAbs_VERTEX )
+ {
+ PShapeIteratorPtr eIt = helper.GetAncestors( eos._shape, *_mesh, TopAbs_EDGE );
+ while ( const TopoDS_Shape* edge = eIt->next() )
+ neighborShapes.erase( getMeshDS()->ShapeToIndex( *edge ));
+ }
+ // find intersecting _LayerEdge's
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ {
+ if ( eos._edges[i]->Is( _LayerEdge::MULTI_NORMAL )) continue;
+ _LayerEdge* edge = eos._edges[i];
+ gp_Ax1 lastSegment = edge->LastSegment( segLen, eos );
+ segLen *= 1.2;
- // set adjacent FACE
- centerCurves[ iE ].SetShapes( edge, convFace, data, helper );
+ gp_Vec eSegDir0, eSegDir1;
+ if ( edge->IsOnEdge() )
+ {
+ SMESH_TNodeXYZ eP( edge->_nodes[0] );
+ eSegDir0 = SMESH_TNodeXYZ( edge->_2neibors->srcNode(0) ) - eP;
+ eSegDir1 = SMESH_TNodeXYZ( edge->_2neibors->srcNode(1) ) - eP;
+ }
+ suspectFaces.clear();
+ searcher->GetElementsInSphere( SMESH_TNodeXYZ( edge->_nodes.back()), edge->_len * 2,
+ SMDSAbs_Face, suspectFaces );
+ collEdges._intEdges.clear();
+ for ( size_t j = 0 ; j < suspectFaces.size(); ++j )
+ {
+ const _TmpMeshFaceOnEdge* f = (const _TmpMeshFaceOnEdge*) suspectFaces[j];
+ if ( f->_le1 == edge || f->_le2 == edge ) continue;
+ if ( !neighborShapes.count( f->_le1->_nodes[0]->getshapeId() )) continue;
+ if ( !neighborShapes.count( f->_le2->_nodes[0]->getshapeId() )) continue;
+ if ( edge->IsOnEdge() ) {
+ if ( edge->_2neibors->include( f->_le1 ) ||
+ edge->_2neibors->include( f->_le2 )) continue;
+ }
+ else {
+ if (( f->_le1->IsOnEdge() && f->_le1->_2neibors->include( edge )) ||
+ ( f->_le2->IsOnEdge() && f->_le2->_2neibors->include( edge ))) continue;
+ }
+ dist1 = dist2 = Precision::Infinite();
+ if ( !edge->SegTriaInter( lastSegment, f->n(0), f->n(1), f->n(2), dist1, eps ))
+ dist1 = Precision::Infinite();
+ if ( !edge->SegTriaInter( lastSegment, f->n(3), f->n(2), f->n(0), dist2, eps ))
+ dist2 = Precision::Infinite();
+ if (( dist1 > segLen ) && ( dist2 > segLen ))
+ continue;
- // get _LayerEdge's of the EDGE
- TGeomID edgeID = meshDS->ShapeToIndex( edge );
- id2end = convFace._subIdToEdgeEnd.find( edgeID );
- if ( id2end == convFace._subIdToEdgeEnd.end() )
+ if ( edge->IsOnEdge() )
{
- // no _LayerEdge's on EDGE, use _LayerEdge's on VERTEXes
- for ( int iV = 0; iV < 2; ++iV )
- {
- TopoDS_Vertex v = helper.IthVertex( iV, edge );
- TGeomID vID = meshDS->ShapeToIndex( v );
- int end = convFace._subIdToEdgeEnd[ vID ];
- int iBeg = end > 0 ? data._endEdgeOnShape[ end-1 ] : 0;
- vertexLEdges[ iV ] = data._edges[ iBeg ];
- }
- edgeLEdge = &vertexLEdges[0];
- edgeLEdgeEnd = edgeLEdge + 2;
-
- centerCurves[ iE ]._adjFace.Nullify();
+ // skip perpendicular EDGEs
+ gp_Vec fSegDir = SMESH_TNodeXYZ( f->n(0) ) - SMESH_TNodeXYZ( f->n(3) );
+ bool isParallel = ( isLessAngle( eSegDir0, fSegDir, angle45 ) ||
+ isLessAngle( eSegDir1, fSegDir, angle45 ) ||
+ isLessAngle( eSegDir0, fSegDir.Reversed(), angle45 ) ||
+ isLessAngle( eSegDir1, fSegDir.Reversed(), angle45 ));
+ if ( !isParallel )
+ continue;
}
- else
+
+ // either limit inflation of edges or remember them for updating _normal
+ // double dot = edge->_normal * f->GetDir();
+ // if ( dot > 0.1 )
{
- data.GetEdgesOnShape( id2end->second, iBeg, iEnd );
- if ( id2end->second >= data._nbShapesToSmooth )
- data.SortOnEdge( edge, iBeg, iEnd, helper );
- edgeLEdge = &data._edges[ iBeg ];
- edgeLEdgeEnd = edgeLEdge + iEnd - iBeg;
- vertexLEdges[0] = data._edges[ iBeg ]->_2neibors->_edges[0];
- vertexLEdges[1] = data._edges[ iEnd-1 ]->_2neibors->_edges[1];
-
- if ( ! data._edges[ iBeg ]->_sWOL.IsNull() )
- centerCurves[ iE ]._adjFace.Nullify();
+ collEdges._intEdges.push_back( f->_le1 );
+ collEdges._intEdges.push_back( f->_le2 );
}
+ // else
+ // {
+ // double shortLen = 0.75 * ( Min( dist1, dist2 ) / edge->_lenFactor );
+ // edge->SetMaxLen( Min( shortLen, edge->_maxLen ));
+ // }
+ }
- // Get curvature centers
+ if ( !collEdges._intEdges.empty() )
+ {
+ collEdges._edge = edge;
+ data._collisionEdges.push_back( collEdges );
+ }
+ }
+ }
- centersBox.Clear();
+ for ( size_t i = 0 ; i < tmpFaces.size(); ++i )
+ delete tmpFaces[i];
- if ( edgeLEdge[0]->IsOnEdge() &&
- convFace.GetCenterOfCurvature( vertexLEdges[0], surfProp, helper, center ))
- { // 1st VERTEX
- centerCurves[ iE ].Append( center, vertexLEdges[0] );
- centersBox.Add( center );
- }
- for ( ; edgeLEdge < edgeLEdgeEnd; ++edgeLEdge )
- if ( convFace.GetCenterOfCurvature( *edgeLEdge, surfProp, helper, center ))
- { // EDGE or VERTEXes
- centerCurves[ iE ].Append( center, *edgeLEdge );
- centersBox.Add( center );
- }
- if ( edgeLEdge[-1]->IsOnEdge() &&
- convFace.GetCenterOfCurvature( vertexLEdges[1], surfProp, helper, center ))
- { // 2nd VERTEX
- centerCurves[ iE ].Append( center, vertexLEdges[1] );
- centersBox.Add( center );
- }
- centerCurves[ iE ]._isDegenerated =
- ( centersBox.IsVoid() || centersBox.SquareExtent() < 1e-6 * nodesBox.SquareExtent() );
+ // restore the zero thickness
+ for ( size_t iS = 0; iS < data._edgesOnShape.size(); ++iS )
+ {
+ _EdgesOnShape& eos = data._edgesOnShape[iS];
+ if ( eos._edges.empty() ) continue;
+ if ( eos.ShapeType() != TopAbs_EDGE && eos.ShapeType() != TopAbs_VERTEX ) continue;
- } // loop on EDGES of convFace._face to set up data of centerCurves
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ {
+ eos._edges[i]->InvalidateStep( 1, eos );
+ eos._edges[i]->_len = 0;
+ }
+ }
+}
- // Compute new normals for _LayerEdge's on EDGEs
+//================================================================================
+/*!
+ * \brief Find _LayerEdge's located on boundary of a convex FACE whose normal
+ * will be updated at each inflation step
+ */
+//================================================================================
- double avgCosin = 0;
- int nbCosin = 0;
- gp_Vec inFaceDir;
- for ( size_t iE1 = 0; iE1 < centerCurves.size(); ++iE1 )
+void _ViscousBuilder::findEdgesToUpdateNormalNearConvexFace( _ConvexFace & convFace,
+ _SolidData& data,
+ SMESH_MesherHelper& helper )
+{
+ const TGeomID convFaceID = getMeshDS()->ShapeToIndex( convFace._face );
+ const double preci = BRep_Tool::Tolerance( convFace._face );
+ Handle(ShapeAnalysis_Surface) surface = helper.GetSurface( convFace._face );
+
+ bool edgesToUpdateFound = false;
+
+ map< TGeomID, _EdgesOnShape* >::iterator id2eos = convFace._subIdToEOS.begin();
+ for ( ; id2eos != convFace._subIdToEOS.end(); ++id2eos )
+ {
+ _EdgesOnShape& eos = * id2eos->second;
+ if ( !eos._sWOL.IsNull() ) continue;
+ if ( !eos._hyp.ToSmooth() ) continue;
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ {
+ _LayerEdge* ledge = eos._edges[ i ];
+ if ( ledge->Is( _LayerEdge::UPD_NORMAL_CONV )) continue; // already checked
+ if ( ledge->Is( _LayerEdge::MULTI_NORMAL )) continue; // not inflatable
+
+ gp_XYZ tgtPos = ( SMESH_NodeXYZ( ledge->_nodes[0] ) +
+ ledge->_normal * ledge->_lenFactor * ledge->_maxLen );
+
+ // the normal must be updated if distance from tgtPos to surface is less than
+ // target thickness
+
+ // find an initial UV for search of a projection of tgtPos to surface
+ const SMDS_MeshNode* nodeInFace = 0;
+ SMDS_ElemIteratorPtr fIt = ledge->_nodes[0]->GetInverseElementIterator(SMDSAbs_Face);
+ while ( fIt->more() && !nodeInFace )
{
- _CentralCurveOnEdge& ceCurve = centerCurves[ iE1 ];
- if ( ceCurve._isDegenerated )
- continue;
- const vector< gp_Pnt >& centers = ceCurve._curvaCenters;
- vector< gp_XYZ > & newNormals = ceCurve._normals;
- for ( size_t iC1 = 0; iC1 < centers.size(); ++iC1 )
+ const SMDS_MeshElement* f = fIt->next();
+ if ( convFaceID != f->getshapeId() ) continue;
+
+ SMDS_ElemIteratorPtr nIt = f->nodesIterator();
+ while ( nIt->more() && !nodeInFace )
{
- isOK = false;
- for ( size_t iE2 = 0; iE2 < centerCurves.size() && !isOK; ++iE2 )
- {
- if ( iE1 != iE2 )
- isOK = centerCurves[ iE2 ].FindNewNormal( centers[ iC1 ], newNormals[ iC1 ]);
- }
- if ( isOK && !ceCurve._adjFace.IsNull() )
- {
- // compute new _LayerEdge::_cosin
- const SMDS_MeshNode* node = ceCurve._ledges[ iC1 ]->_nodes[0];
- inFaceDir = getFaceDir( ceCurve._adjFace, ceCurve._edge, node, helper, isOK );
- if ( isOK )
- {
- double angle = inFaceDir.Angle( newNormals[ iC1 ] ); // [0,PI]
- ceCurve._ledges[ iC1 ]->_cosin = Cos( angle );
- avgCosin += ceCurve._ledges[ iC1 ]->_cosin;
- nbCosin++;
- }
- }
+ const SMDS_MeshElement* n = nIt->next();
+ if ( n->getshapeId() == convFaceID )
+ nodeInFace = static_cast< const SMDS_MeshNode* >( n );
}
}
- // set new normals to _LayerEdge's of NOT degenerated central curves
- for ( size_t iE = 0; iE < centerCurves.size(); ++iE )
+ if ( !nodeInFace )
+ continue;
+ gp_XY uv = helper.GetNodeUV( convFace._face, nodeInFace );
+
+ // projection
+ surface->NextValueOfUV( uv, tgtPos, preci );
+ double dist = surface->Gap();
+ if ( dist < 0.95 * ledge->_maxLen )
{
- if ( centerCurves[ iE ]._isDegenerated )
- continue;
- for ( size_t iLE = 0; iLE < centerCurves[ iE ]._ledges.size(); ++iLE )
- centerCurves[ iE ]._ledges[ iLE ]->_normal = centerCurves[ iE ]._normals[ iLE ];
- }
- // set new normals to _LayerEdge's of degenerated central curves
- for ( size_t iE = 0; iE < centerCurves.size(); ++iE )
- {
- if ( !centerCurves[ iE ]._isDegenerated ||
- centerCurves[ iE ]._ledges.size() < 3 )
- continue;
- // new normal is an average of new normals at VERTEXes that
- // was computed on non-degenerated _CentralCurveOnEdge's
- gp_XYZ newNorm = ( centerCurves[ iE ]._ledges.front()->_normal +
- centerCurves[ iE ]._ledges.back ()->_normal );
- double sz = newNorm.Modulus();
- if ( sz < 1e-200 )
- continue;
- newNorm /= sz;
- double newCosin = ( 0.5 * centerCurves[ iE ]._ledges.front()->_cosin +
- 0.5 * centerCurves[ iE ]._ledges.back ()->_cosin );
- for ( size_t iLE = 1, nb = centerCurves[ iE ]._ledges.size() - 1; iLE < nb; ++iLE )
- {
- centerCurves[ iE ]._ledges[ iLE ]->_normal = newNorm;
- centerCurves[ iE ]._ledges[ iLE ]->_cosin = newCosin;
- }
+ ledge->Set( _LayerEdge::UPD_NORMAL_CONV );
+ if ( !ledge->_curvature ) ledge->_curvature = _Factory::NewCurvature();
+ ledge->_curvature->_uv.SetCoord( uv.X(), uv.Y() );
+ edgesToUpdateFound = true;
}
+ }
+ }
- // Find new normals for _LayerEdge's based on FACE
+ if ( !convFace._isTooCurved && edgesToUpdateFound )
+ {
+ data._convexFaces.insert( make_pair( convFaceID, convFace )).first->second;
+ }
+}
- if ( nbCosin > 0 )
- avgCosin /= nbCosin;
- const TGeomID faceID = meshDS->ShapeToIndex( convFace._face );
- map< TGeomID, int >::iterator id2end = convFace._subIdToEdgeEnd.find( faceID );
- if ( id2end != convFace._subIdToEdgeEnd.end() )
+//================================================================================
+/*!
+ * \brief Modify normals of _LayerEdge's on EDGE's to avoid intersection with
+ * _LayerEdge's on neighbor EDGE's
+ */
+//================================================================================
+
+bool _ViscousBuilder::updateNormals( _SolidData& data,
+ SMESH_MesherHelper& helper,
+ int stepNb,
+ double /*stepSize*/)
+{
+ updateNormalsOfC1Vertices( data );
+
+ if ( stepNb > 0 && !updateNormalsOfConvexFaces( data, helper, stepNb ))
+ return false;
+
+ // map to store new _normal and _cosin for each intersected edge
+ map< _LayerEdge*, _LayerEdge, _LayerEdgeCmp > edge2newEdge;
+ map< _LayerEdge*, _LayerEdge, _LayerEdgeCmp >::iterator e2neIt;
+ _LayerEdge zeroEdge;
+ zeroEdge._normal.SetCoord( 0,0,0 );
+ zeroEdge._maxLen = Precision::Infinite();
+ zeroEdge._nodes.resize(1); // to init _TmpMeshFaceOnEdge
+
+ set< _EdgesOnShape* > shapesToSmooth, edgesNoAnaSmooth;
+
+ double segLen, dist1, dist2, dist;
+ vector< pair< _LayerEdge*, double > > intEdgesDist;
+ _TmpMeshFaceOnEdge quad( &zeroEdge, &zeroEdge, 0 );
+
+ for ( int iter = 0; iter < 5; ++iter )
+ {
+ edge2newEdge.clear();
+
+ for ( size_t iE = 0; iE < data._collisionEdges.size(); ++iE )
+ {
+ _CollisionEdges& ce = data._collisionEdges[iE];
+ _LayerEdge* edge1 = ce._edge;
+ if ( !edge1 /*|| edge1->Is( _LayerEdge::BLOCKED )*/) continue;
+ _EdgesOnShape* eos1 = data.GetShapeEdges( edge1 );
+ if ( !eos1 ) continue;
+
+ // detect intersections
+ gp_Ax1 lastSeg = edge1->LastSegment( segLen, *eos1 );
+ double testLen = 1.5 * edge1->_maxLen * edge1->_lenFactor;
+ double eps = 0.5;
+ intEdgesDist.clear();
+ double minIntDist = Precision::Infinite();
+ for ( size_t i = 0; i < ce._intEdges.size(); i += 2 )
{
- int iE = 0;
- gp_XYZ newNorm;
- data.GetEdgesOnShape( id2end->second, iBeg, iEnd );
- for ( ; iBeg < iEnd; ++iBeg )
+ if ( edge1->Is( _LayerEdge::BLOCKED ) &&
+ ce._intEdges[i ]->Is( _LayerEdge::BLOCKED ) &&
+ ce._intEdges[i+1]->Is( _LayerEdge::BLOCKED ))
+ continue;
+ double dot = edge1->_normal * quad.GetDir( ce._intEdges[i], ce._intEdges[i+1] );
+ double fact = ( 1.1 + dot * dot );
+ SMESH_TNodeXYZ pSrc0( ce.nSrc(i) ), pSrc1( ce.nSrc(i+1) );
+ SMESH_TNodeXYZ pTgt0( ce.nTgt(i) ), pTgt1( ce.nTgt(i+1) );
+ gp_XYZ pLast0 = pSrc0 + ( pTgt0 - pSrc0 ) * fact;
+ gp_XYZ pLast1 = pSrc1 + ( pTgt1 - pSrc1 ) * fact;
+ dist1 = dist2 = Precision::Infinite();
+ if ( !edge1->SegTriaInter( lastSeg, pSrc0, pLast0, pSrc1, dist1, eps ) &&
+ !edge1->SegTriaInter( lastSeg, pSrc1, pLast1, pLast0, dist2, eps ))
+ continue;
+ dist = dist1;
+ if ( dist > testLen || dist <= 0 )
{
- _LayerEdge* ledge = data._edges[ iBeg ];
- if ( !convFace.GetCenterOfCurvature( ledge, surfProp, helper, center ))
+ dist = dist2;
+ if ( dist > testLen || dist <= 0 )
continue;
- for ( size_t i = 0; i < centerCurves.size(); ++i, ++iE )
+ }
+ // choose a closest edge
+ gp_Pnt intP( lastSeg.Location().XYZ() + lastSeg.Direction().XYZ() * ( dist + segLen ));
+ double d1 = intP.SquareDistance( pSrc0 );
+ double d2 = intP.SquareDistance( pSrc1 );
+ int iClose = i + ( d2 < d1 );
+ _LayerEdge* edge2 = ce._intEdges[iClose];
+ edge2->Unset( _LayerEdge::MARKED );
+
+ // choose a closest edge among neighbors
+ gp_Pnt srcP( SMESH_TNodeXYZ( edge1->_nodes[0] ));
+ d1 = srcP.SquareDistance( SMESH_TNodeXYZ( edge2->_nodes[0] ));
+ for ( size_t j = 0; j < intEdgesDist.size(); ++j )
+ {
+ _LayerEdge * edgeJ = intEdgesDist[j].first;
+ if ( edge2->IsNeiborOnEdge( edgeJ ))
{
- iE = iE % centerCurves.size();
- if ( centerCurves[ iE ]._isDegenerated )
- continue;
- newNorm.SetCoord( 0,0,0 );
- if ( centerCurves[ iE ].FindNewNormal( center, newNorm ))
- {
- ledge->_normal = newNorm;
- ledge->_cosin = avgCosin;
- break;
- }
+ d2 = srcP.SquareDistance( SMESH_TNodeXYZ( edgeJ->_nodes[0] ));
+ ( d1 < d2 ? edgeJ : edge2 )->Set( _LayerEdge::MARKED );
}
}
+ intEdgesDist.push_back( make_pair( edge2, dist ));
+ // if ( Abs( d2 - d1 ) / Max( d2, d1 ) < 0.5 )
+ // {
+ // iClose = i + !( d2 < d1 );
+ // intEdges.push_back( ce._intEdges[iClose] );
+ // ce._intEdges[iClose]->Unset( _LayerEdge::MARKED );
+ // }
+ minIntDist = Min( edge1->_len * edge1->_lenFactor - segLen + dist, minIntDist );
+ }
+
+ //ce._edge = 0;
+
+ // compute new _normals
+ for ( size_t i = 0; i < intEdgesDist.size(); ++i )
+ {
+ _LayerEdge* edge2 = intEdgesDist[i].first;
+ double distWgt = edge1->_len / intEdgesDist[i].second;
+ // if ( edge1->Is( _LayerEdge::BLOCKED ) &&
+ // edge2->Is( _LayerEdge::BLOCKED )) continue;
+ if ( edge2->Is( _LayerEdge::MARKED )) continue;
+ edge2->Set( _LayerEdge::MARKED );
+
+ // get a new normal
+ gp_XYZ dir1 = edge1->_normal, dir2 = edge2->_normal;
+
+ double cos1 = Abs( edge1->_cosin ), cos2 = Abs( edge2->_cosin );
+ double wgt1 = ( cos1 + 0.001 ) / ( cos1 + cos2 + 0.002 );
+ double wgt2 = ( cos2 + 0.001 ) / ( cos1 + cos2 + 0.002 );
+ // double cos1 = Abs( edge1->_cosin ), cos2 = Abs( edge2->_cosin );
+ // double sgn1 = 0.1 * ( 1 + edge1->_cosin ), sgn2 = 0.1 * ( 1 + edge2->_cosin );
+ // double wgt1 = ( cos1 + sgn1 ) / ( cos1 + cos2 + sgn1 + sgn2 );
+ // double wgt2 = ( cos2 + sgn2 ) / ( cos1 + cos2 + sgn1 + sgn2 );
+ gp_XYZ newNormal = wgt1 * dir1 + wgt2 * dir2;
+ newNormal.Normalize();
+
+ // get new cosin
+ double newCos;
+ double sgn1 = edge1->_cosin / cos1, sgn2 = edge2->_cosin / cos2;
+ if ( cos1 < theMinSmoothCosin )
+ {
+ newCos = cos2 * sgn1;
+ }
+ else if ( cos2 > theMinSmoothCosin ) // both cos1 and cos2 > theMinSmoothCosin
+ {
+ newCos = ( wgt1 * cos1 + wgt2 * cos2 ) * edge1->_cosin / cos1;
+ }
+ else
+ {
+ newCos = edge1->_cosin;
+ }
+
+ e2neIt = edge2newEdge.insert( make_pair( edge1, zeroEdge )).first;
+ e2neIt->second._normal += distWgt * newNormal;
+ e2neIt->second._cosin = newCos;
+ e2neIt->second.SetMaxLen( 0.7 * minIntDist / edge1->_lenFactor );
+ if ( iter > 0 && sgn1 * sgn2 < 0 && edge1->_cosin < 0 )
+ e2neIt->second._normal += dir2;
+
+ e2neIt = edge2newEdge.insert( make_pair( edge2, zeroEdge )).first;
+ e2neIt->second._normal += distWgt * newNormal;
+ if ( Precision::IsInfinite( zeroEdge._maxLen ))
+ {
+ e2neIt->second._cosin = edge2->_cosin;
+ e2neIt->second.SetMaxLen( 1.3 * minIntDist / edge1->_lenFactor );
+ }
+ if ( iter > 0 && sgn1 * sgn2 < 0 && edge2->_cosin < 0 )
+ e2neIt->second._normal += dir1;
}
+ }
- } // not a quasi-spherical FACE
+ if ( edge2newEdge.empty() )
+ break; //return true;
- // Update _LayerEdge's data according to a new normal
+ dumpFunction(SMESH_Comment("updateNormals")<< data._index << "_" << stepNb << "_it" << iter);
- dumpFunction(SMESH_Comment("updateNormalsOfConvexFaces")<<data._index
- <<"_F"<<meshDS->ShapeToIndex( convFace._face ));
+ // Update data of edges depending on a new _normal
- id2end = convFace._subIdToEdgeEnd.begin();
- for ( ; id2end != convFace._subIdToEdgeEnd.end(); ++id2end )
+ data.UnmarkEdges();
+ for ( e2neIt = edge2newEdge.begin(); e2neIt != edge2newEdge.end(); ++e2neIt )
{
- data.GetEdgesOnShape( id2end->second, iBeg, iEnd );
- for ( ; iBeg < iEnd; ++iBeg )
+ _LayerEdge* edge = e2neIt->first;
+ _LayerEdge& newEdge = e2neIt->second;
+ _EdgesOnShape* eos = data.GetShapeEdges( edge );
+ if ( edge->Is( _LayerEdge::BLOCKED ) && newEdge._maxLen > edge->_len )
+ continue;
+
+ // Check if a new _normal is OK:
+ newEdge._normal.Normalize();
+ if ( !isNewNormalOk( data, *edge, newEdge._normal ))
{
- _LayerEdge* & ledge = data._edges[ iBeg ];
- double len = ledge->_len;
- ledge->InvalidateStep( stepNb + 1, /*restoreLength=*/true );
- ledge->SetCosin( ledge->_cosin );
- ledge->SetNewLength( len, helper );
+ if ( newEdge._maxLen < edge->_len && iter > 0 ) // limit _maxLen
+ {
+ edge->InvalidateStep( stepNb + 1, *eos, /*restoreLength=*/true );
+ edge->SetMaxLen( newEdge._maxLen );
+ edge->SetNewLength( newEdge._maxLen, *eos, helper );
+ }
+ continue; // the new _normal is bad
}
+ // the new _normal is OK
- } // loop on sub-shapes of convFace._face
+ // find shapes that need smoothing due to change of _normal
+ if ( edge->_cosin < theMinSmoothCosin &&
+ newEdge._cosin > theMinSmoothCosin )
+ {
+ if ( eos->_sWOL.IsNull() )
+ {
+ SMDS_ElemIteratorPtr fIt = edge->_nodes[0]->GetInverseElementIterator(SMDSAbs_Face);
+ while ( fIt->more() )
+ shapesToSmooth.insert( data.GetShapeEdges( fIt->next()->getshapeId() ));
+ }
+ else // edge inflates along a FACE
+ {
+ TopoDS_Shape V = helper.GetSubShapeByNode( edge->_nodes[0], getMeshDS() );
+ PShapeIteratorPtr eIt = helper.GetAncestors( V, *_mesh, TopAbs_EDGE, &eos->_sWOL );
+ while ( const TopoDS_Shape* E = eIt->next() )
+ {
+ gp_Vec edgeDir = getEdgeDir( TopoDS::Edge( *E ), TopoDS::Vertex( V ));
+ double angle = edgeDir.Angle( newEdge._normal ); // [0,PI]
+ if ( angle < M_PI / 2 )
+ shapesToSmooth.insert( data.GetShapeEdges( *E ));
+ }
+ }
+ }
- // Find FACEs adjacent to convFace._face that got necessity to smooth
- // as a result of normals modification
+ double len = edge->_len;
+ edge->InvalidateStep( stepNb + 1, *eos, /*restoreLength=*/true );
+ edge->SetNormal( newEdge._normal );
+ edge->SetCosin( newEdge._cosin );
+ edge->SetNewLength( len, *eos, helper );
+ edge->Set( _LayerEdge::MARKED );
+ edge->Set( _LayerEdge::NORMAL_UPDATED );
+ edgesNoAnaSmooth.insert( eos );
+ }
- set< TGeomID > adjFacesToSmooth;
- for ( size_t iE = 0; iE < centerCurves.size(); ++iE )
+ // Update normals and other dependent data of not intersecting _LayerEdge's
+ // neighboring the intersecting ones
+
+ for ( e2neIt = edge2newEdge.begin(); e2neIt != edge2newEdge.end(); ++e2neIt )
{
- if ( centerCurves[ iE ]._adjFace.IsNull() ||
- centerCurves[ iE ]._adjFaceToSmooth )
+ _LayerEdge* edge1 = e2neIt->first;
+ _EdgesOnShape* eos1 = data.GetShapeEdges( edge1 );
+ if ( !edge1->Is( _LayerEdge::MARKED ))
continue;
- for ( size_t iLE = 0; iLE < centerCurves[ iE ]._ledges.size(); ++iLE )
+
+ if ( edge1->IsOnEdge() )
{
- if ( centerCurves[ iE ]._ledges[ iLE ]->_cosin > theMinSmoothCosin )
+ const SMDS_MeshNode * n1 = edge1->_2neibors->srcNode(0);
+ const SMDS_MeshNode * n2 = edge1->_2neibors->srcNode(1);
+ edge1->SetDataByNeighbors( n1, n2, *eos1, helper );
+ }
+
+ if ( !edge1->_2neibors || !eos1->_sWOL.IsNull() )
+ continue;
+ for ( int j = 0; j < 2; ++j ) // loop on 2 neighbors
+ {
+ _LayerEdge* neighbor = edge1->_2neibors->_edges[j];
+ if ( neighbor->Is( _LayerEdge::MARKED ) /*edge2newEdge.count ( neighbor )*/)
+ continue; // j-th neighbor is also intersected
+ _LayerEdge* prevEdge = edge1;
+ const int nbSteps = 10;
+ for ( int step = nbSteps; step; --step ) // step from edge1 in j-th direction
{
- adjFacesToSmooth.insert( meshDS->ShapeToIndex( centerCurves[ iE ]._adjFace ));
- break;
+ if ( neighbor->Is( _LayerEdge::BLOCKED ) ||
+ neighbor->Is( _LayerEdge::MARKED ))
+ break;
+ _EdgesOnShape* eos = data.GetShapeEdges( neighbor );
+ if ( !eos ) continue;
+ _LayerEdge* nextEdge = neighbor;
+ if ( neighbor->_2neibors )
+ {
+ int iNext = 0;
+ nextEdge = neighbor->_2neibors->_edges[iNext];
+ if ( nextEdge == prevEdge )
+ nextEdge = neighbor->_2neibors->_edges[ ++iNext ];
+ }
+ double r = double(step-1)/nbSteps/(iter+1);
+ if ( !nextEdge->_2neibors )
+ r = Min( r, 0.5 );
+
+ gp_XYZ newNorm = prevEdge->_normal * r + nextEdge->_normal * (1-r);
+ newNorm.Normalize();
+ if ( !isNewNormalOk( data, *neighbor, newNorm ))
+ break;
+
+ double len = neighbor->_len;
+ neighbor->InvalidateStep( stepNb + 1, *eos, /*restoreLength=*/true );
+ neighbor->SetNormal( newNorm );
+ neighbor->SetCosin( prevEdge->_cosin * r + nextEdge->_cosin * (1-r) );
+ if ( neighbor->_2neibors )
+ neighbor->SetDataByNeighbors( prevEdge->_nodes[0], nextEdge->_nodes[0], *eos, helper );
+ neighbor->SetNewLength( len, *eos, helper );
+ neighbor->Set( _LayerEdge::MARKED );
+ neighbor->Set( _LayerEdge::NORMAL_UPDATED );
+ edgesNoAnaSmooth.insert( eos );
+
+ if ( !neighbor->_2neibors )
+ break; // neighbor is on VERTEX
+
+ // goto the next neighbor
+ prevEdge = neighbor;
+ neighbor = nextEdge;
}
}
}
- data.AddShapesToSmooth( adjFacesToSmooth );
-
dumpFunctionEnd();
+ } // iterations
-
- } // loop on data._convexFaces
+ data.AddShapesToSmooth( shapesToSmooth, &edgesNoAnaSmooth );
return true;
}
//================================================================================
/*!
- * \brief Finds a center of curvature of a surface at a _LayerEdge
+ * \brief Check if a new normal is OK
*/
//================================================================================
-bool _ConvexFace::GetCenterOfCurvature( _LayerEdge* ledge,
- BRepLProp_SLProps& surfProp,
- SMESH_MesherHelper& helper,
- gp_Pnt & center ) const
+bool _ViscousBuilder::isNewNormalOk( _SolidData& data,
+ _LayerEdge& edge,
+ const gp_XYZ& newNormal)
{
- gp_XY uv = helper.GetNodeUV( _face, ledge->_nodes[0] );
- surfProp.SetParameters( uv.X(), uv.Y() );
- if ( !surfProp.IsCurvatureDefined() )
- return false;
-
- const double oriFactor = ( _face.Orientation() == TopAbs_REVERSED ? +1. : -1. );
- double surfCurvatureMax = surfProp.MaxCurvature() * oriFactor;
- double surfCurvatureMin = surfProp.MinCurvature() * oriFactor;
- if ( surfCurvatureMin > surfCurvatureMax )
- center = surfProp.Value().Translated( surfProp.Normal().XYZ() / surfCurvatureMin * oriFactor );
- else
- center = surfProp.Value().Translated( surfProp.Normal().XYZ() / surfCurvatureMax * oriFactor );
+ // check a min angle between the newNormal and surrounding faces
+ vector<_Simplex> simplices;
+ SMESH_TNodeXYZ n0( edge._nodes[0] ), n1, n2;
+ _Simplex::GetSimplices( n0._node, simplices, data._ignoreFaceIds, &data );
+ double newMinDot = 1, curMinDot = 1;
+ for ( size_t i = 0; i < simplices.size(); ++i )
+ {
+ n1.Set( simplices[i]._nPrev );
+ n2.Set( simplices[i]._nNext );
+ gp_XYZ normFace = ( n1 - n0 ) ^ ( n2 - n0 );
+ double normLen2 = normFace.SquareModulus();
+ if ( normLen2 < std::numeric_limits<double>::min() )
+ continue;
+ normFace /= Sqrt( normLen2 );
+ newMinDot = Min( newNormal * normFace, newMinDot );
+ curMinDot = Min( edge._normal * normFace, curMinDot );
+ }
+ bool ok = true;
+ if ( newMinDot < 0.5 )
+ {
+ ok = ( newMinDot >= curMinDot * 0.9 );
+ //return ( newMinDot >= ( curMinDot * ( 0.8 + 0.1 * edge.NbSteps() )));
+ // double initMinDot2 = 1. - edge._cosin * edge._cosin;
+ // return ( newMinDot * newMinDot ) >= ( 0.8 * initMinDot2 );
+ }
- return true;
+ return ok;
}
//================================================================================
/*!
- * \brief Check that prisms are not distorted
+ * \brief Modify normals of _LayerEdge's on FACE to reflex smoothing
*/
//================================================================================
-bool _ConvexFace::CheckPrisms() const
+bool _ViscousBuilder::updateNormalsOfSmoothed( _SolidData& data,
+ SMESH_MesherHelper& /*helper*/,
+ const int nbSteps,
+ const double stepSize )
{
- double vol = 0;
- for ( size_t i = 0; i < _simplexTestEdges.size(); ++i )
+ if ( data._nbShapesToSmooth == 0 || nbSteps == 0 )
+ return true; // no shapes needing smoothing
+
+ for ( size_t iS = 0; iS < data._edgesOnShape.size(); ++iS )
{
- const _LayerEdge* edge = _simplexTestEdges[i];
- SMESH_TNodeXYZ tgtXYZ( edge->_nodes.back() );
- for ( size_t j = 0; j < edge->_simplices.size(); ++j )
- if ( !edge->_simplices[j].IsForward( edge->_nodes[0], &tgtXYZ, vol ))
- {
- debugMsg( "Bad simplex of _simplexTestEdges ("
- << " "<< edge->_nodes[0]->GetID()<< " "<< tgtXYZ._node->GetID()
- << " "<< edge->_simplices[j]._nPrev->GetID()
- << " "<< edge->_simplices[j]._nNext->GetID() << " )" );
- return false;
- }
+ _EdgesOnShape& eos = data._edgesOnShape[ iS ];
+ if ( //!eos._toSmooth || _eosC1 have _toSmooth == false
+ !eos._hyp.ToSmooth() ||
+ eos.ShapeType() != TopAbs_FACE ||
+ eos._edges.empty() )
+ continue;
+
+ bool toSmooth = ( eos._edges[ 0 ]->NbSteps() >= nbSteps+1 );
+ if ( !toSmooth ) continue;
+
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ {
+ _LayerEdge* edge = eos._edges[i];
+ if ( !edge->Is( _LayerEdge::SMOOTHED ))
+ continue;
+ if ( edge->Is( _LayerEdge::DIFFICULT ) && nbSteps != 1 )
+ continue;
+
+ const gp_XYZ& pPrev = edge->PrevPos();
+ const gp_XYZ& pLast = edge->_pos.back();
+ gp_XYZ stepVec = pLast - pPrev;
+ double realStepSize = stepVec.Modulus();
+ if ( realStepSize < numeric_limits<double>::min() )
+ continue;
+
+ edge->_lenFactor = realStepSize / stepSize;
+ edge->_normal = stepVec / realStepSize;
+ edge->Set( _LayerEdge::NORMAL_UPDATED );
+ }
}
+
return true;
}
//================================================================================
/*!
- * \brief Try to compute a new normal by interpolating normals of _LayerEdge's
- * stored in this _CentralCurveOnEdge.
- * \param [in] center - curvature center of a point of another _CentralCurveOnEdge.
- * \param [in,out] newNormal - current normal at this point, to be redefined
- * \return bool - true if succeeded.
+ * \brief Modify normals of _LayerEdge's on C1 VERTEXes
*/
//================================================================================
-bool _CentralCurveOnEdge::FindNewNormal( const gp_Pnt& center, gp_XYZ& newNormal )
+void _ViscousBuilder::updateNormalsOfC1Vertices( _SolidData& data )
{
- if ( this->_isDegenerated )
- return false;
-
- // find two centers the given one lies between
-
- for ( size_t i = 0, nb = _curvaCenters.size()-1; i < nb; ++i )
+ for ( size_t iS = 0; iS < data._edgesOnShape.size(); ++iS )
{
- double sl2 = 1.001 * _segLength2[ i ];
-
- double d1 = center.SquareDistance( _curvaCenters[ i ]);
- if ( d1 > sl2 )
- continue;
-
- double d2 = center.SquareDistance( _curvaCenters[ i+1 ]);
- if ( d2 > sl2 || d2 + d1 < 1e-100 )
+ _EdgesOnShape& eov = data._edgesOnShape[ iS ];
+ if ( eov._eosC1.empty() ||
+ eov.ShapeType() != TopAbs_VERTEX ||
+ eov._edges.empty() )
continue;
- d1 = Sqrt( d1 );
- d2 = Sqrt( d2 );
- double r = d1 / ( d1 + d2 );
- gp_XYZ norm = (( 1. - r ) * _ledges[ i ]->_normal +
- ( r ) * _ledges[ i+1 ]->_normal );
- norm.Normalize();
+ gp_XYZ newNorm = eov._edges[0]->_normal;
+ double curThick = eov._edges[0]->_len * eov._edges[0]->_lenFactor;
+ bool normChanged = false;
- newNormal += norm;
- double sz = newNormal.Modulus();
- if ( sz < 1e-200 )
- break;
- newNormal /= sz;
- return true;
+ for ( size_t i = 0; i < eov._eosC1.size(); ++i )
+ {
+ _EdgesOnShape* eoe = eov._eosC1[i];
+ const TopoDS_Edge& e = TopoDS::Edge( eoe->_shape );
+ const double eLen = SMESH_Algo::EdgeLength( e );
+ TopoDS_Shape oppV = SMESH_MesherHelper::IthVertex( 0, e );
+ if ( oppV.IsSame( eov._shape ))
+ oppV = SMESH_MesherHelper::IthVertex( 1, e );
+ _EdgesOnShape* eovOpp = data.GetShapeEdges( oppV );
+ if ( !eovOpp || eovOpp->_edges.empty() ) continue;
+ if ( eov._edges[0]->Is( _LayerEdge::BLOCKED )) continue;
+
+ double curThickOpp = eovOpp->_edges[0]->_len * eovOpp->_edges[0]->_lenFactor;
+ if ( curThickOpp + curThick < eLen )
+ continue;
+
+ double wgt = 2. * curThick / eLen;
+ newNorm += wgt * eovOpp->_edges[0]->_normal;
+ normChanged = true;
+ }
+ if ( normChanged )
+ {
+ eov._edges[0]->SetNormal( newNorm.Normalized() );
+ eov._edges[0]->Set( _LayerEdge::NORMAL_UPDATED );
+ }
}
- return false;
}
//================================================================================
/*!
- * \brief Set shape members
+ * \brief Modify normals of _LayerEdge's on _ConvexFace's
*/
//================================================================================
-void _CentralCurveOnEdge::SetShapes( const TopoDS_Edge& edge,
- const _ConvexFace& convFace,
- const _SolidData& data,
- SMESH_MesherHelper& helper)
+bool _ViscousBuilder::updateNormalsOfConvexFaces( _SolidData& data,
+ SMESH_MesherHelper& helper,
+ int stepNb )
{
- _edge = edge;
+ SMESHDS_Mesh* meshDS = helper.GetMeshDS();
+ bool isOK;
- PShapeIteratorPtr fIt = helper.GetAncestors( edge, *helper.GetMesh(), TopAbs_FACE );
- while ( const TopoDS_Shape* F = fIt->next())
- if ( !convFace._face.IsSame( *F ))
- {
- _adjFace = TopoDS::Face( *F );
- _adjFaceToSmooth = false;
- // _adjFace already in a smoothing queue ?
- size_t end;
- TGeomID adjFaceID = helper.GetMeshDS()->ShapeToIndex( *F );
- if ( data.GetShapeEdges( adjFaceID, end ))
- _adjFaceToSmooth = ( end < data._nbShapesToSmooth );
- break;
- }
-}
+ map< TGeomID, _ConvexFace >::iterator id2face = data._convexFaces.begin();
+ for ( ; id2face != data._convexFaces.end(); ++id2face )
+ {
+ _ConvexFace & convFace = (*id2face).second;
+ convFace._normalsFixedOnBorders = false; // to update at each inflation step
-//================================================================================
-/*!
- * \brief Looks for intersection of it's last segment with faces
- * \param distance - returns shortest distance from the last node to intersection
- */
-//================================================================================
+ if ( convFace._normalsFixed )
+ continue; // already fixed
+ if ( convFace.CheckPrisms() )
+ continue; // nothing to fix
-bool _LayerEdge::FindIntersection( SMESH_ElementSearcher& searcher,
- double & distance,
- const double& epsilon,
- const SMDS_MeshElement** face)
-{
- vector< const SMDS_MeshElement* > suspectFaces;
- double segLen;
- gp_Ax1 lastSegment = LastSegment(segLen);
- searcher.GetElementsNearLine( lastSegment, SMDSAbs_Face, suspectFaces );
+ convFace._normalsFixed = true;
- bool segmentIntersected = false;
- distance = Precision::Infinite();
- int iFace = -1; // intersected face
- for ( size_t j = 0 ; j < suspectFaces.size() /*&& !segmentIntersected*/; ++j )
- {
- const SMDS_MeshElement* face = suspectFaces[j];
- if ( face->GetNodeIndex( _nodes.back() ) >= 0 ||
- face->GetNodeIndex( _nodes[0] ) >= 0 )
- continue; // face sharing _LayerEdge node
- const int nbNodes = face->NbCornerNodes();
- bool intFound = false;
- double dist;
- SMDS_MeshElement::iterator nIt = face->begin_nodes();
- if ( nbNodes == 3 )
- {
- intFound = SegTriaInter( lastSegment, *nIt++, *nIt++, *nIt++, dist, epsilon );
- }
- else
+ BRepAdaptor_Surface surface ( convFace._face, false );
+ BRepLProp_SLProps surfProp( surface, 2, 1e-6 );
+
+ // check if the convex FACE is of spherical shape
+
+ Bnd_B3d centersBox; // bbox of centers of curvature of _LayerEdge's on VERTEXes
+ Bnd_B3d nodesBox;
+ gp_Pnt center;
+
+ map< TGeomID, _EdgesOnShape* >::iterator id2eos = convFace._subIdToEOS.begin();
+ for ( ; id2eos != convFace._subIdToEOS.end(); ++id2eos )
{
- const SMDS_MeshNode* tria[3];
- tria[0] = *nIt++;
- tria[1] = *nIt++;
- for ( int n2 = 2; n2 < nbNodes && !intFound; ++n2 )
+ _EdgesOnShape& eos = *(id2eos->second);
+ if ( eos.ShapeType() == TopAbs_VERTEX )
{
- tria[2] = *nIt++;
- intFound = SegTriaInter(lastSegment, tria[0], tria[1], tria[2], dist, epsilon );
- tria[1] = tria[2];
+ _LayerEdge* ledge = eos._edges[ 0 ];
+ if ( convFace.GetCenterOfCurvature( ledge, surfProp, helper, center ))
+ centersBox.Add( center );
}
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ nodesBox.Add( SMESH_TNodeXYZ( eos._edges[ i ]->_nodes[0] ));
}
- if ( intFound )
+ if ( centersBox.IsVoid() )
{
- if ( dist < segLen*(1.01) && dist > -(_len*_lenFactor-segLen) )
- segmentIntersected = true;
- if ( distance > dist )
- distance = dist, iFace = j;
+ debugMsg( "Error: centersBox.IsVoid()" );
+ return false;
}
- }
- if ( iFace != -1 && face ) *face = suspectFaces[iFace];
-
- if ( segmentIntersected )
- {
-#ifdef __myDEBUG
- SMDS_MeshElement::iterator nIt = suspectFaces[iFace]->begin_nodes();
- gp_XYZ intP( lastSegment.Location().XYZ() + lastSegment.Direction().XYZ() * distance );
- cout << "nodes: tgt " << _nodes.back()->GetID() << " src " << _nodes[0]->GetID()
- << ", intersection with face ("
- << (*nIt++)->GetID()<<" "<< (*nIt++)->GetID()<<" "<< (*nIt++)->GetID()
- << ") at point (" << intP.X() << ", " << intP.Y() << ", " << intP.Z()
- << ") distance = " << distance - segLen<< endl;
-#endif
- }
+ const bool isSpherical =
+ ( centersBox.SquareExtent() < 1e-6 * nodesBox.SquareExtent() );
- distance -= segLen;
+ int nbEdges = helper.Count( convFace._face, TopAbs_EDGE, /*ignoreSame=*/false );
+ vector < _CentralCurveOnEdge > centerCurves( nbEdges );
- return segmentIntersected;
-}
+ if ( isSpherical )
+ {
+ // set _LayerEdge::_normal as average of all normals
-//================================================================================
-/*!
- * \brief Returns size and direction of the last segment
- */
-//================================================================================
+ // WARNING: different density of nodes on EDGEs is not taken into account that
+ // can lead to an improper new normal
-gp_Ax1 _LayerEdge::LastSegment(double& segLen) const
-{
- // find two non-coincident positions
- gp_XYZ orig = _pos.back();
- gp_XYZ dir;
- int iPrev = _pos.size() - 2;
- const double tol = ( _len > 0 ) ? 0.3*_len : 1e-100; // adjusted for IPAL52478 + PAL22576
- while ( iPrev >= 0 )
- {
- dir = orig - _pos[iPrev];
- if ( dir.SquareModulus() > tol*tol )
- break;
- else
- iPrev--;
- }
+ gp_XYZ avgNormal( 0,0,0 );
+ nbEdges = 0;
+ id2eos = convFace._subIdToEOS.begin();
+ for ( ; id2eos != convFace._subIdToEOS.end(); ++id2eos )
+ {
+ _EdgesOnShape& eos = *(id2eos->second);
+ // set data of _CentralCurveOnEdge
+ if ( eos.ShapeType() == TopAbs_EDGE )
+ {
+ _CentralCurveOnEdge& ceCurve = centerCurves[ nbEdges++ ];
+ ceCurve.SetShapes( TopoDS::Edge( eos._shape ), convFace, data, helper );
+ if ( !eos._sWOL.IsNull() )
+ ceCurve._adjFace.Nullify();
+ else
+ ceCurve._ledges.insert( ceCurve._ledges.end(),
+ eos._edges.begin(), eos._edges.end());
+ }
+ // summarize normals
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ avgNormal += eos._edges[ i ]->_normal;
+ }
+ double normSize = avgNormal.SquareModulus();
+ if ( normSize < 1e-200 )
+ {
+ debugMsg( "updateNormalsOfConvexFaces(): zero avgNormal" );
+ return false;
+ }
+ avgNormal /= Sqrt( normSize );
- // make gp_Ax1
- gp_Ax1 segDir;
- if ( iPrev < 0 )
- {
- segDir.SetLocation( SMESH_TNodeXYZ( _nodes[0] ));
- segDir.SetDirection( _normal );
- segLen = 0;
- }
- else
- {
- gp_Pnt pPrev = _pos[ iPrev ];
- if ( !_sWOL.IsNull() )
- {
- TopLoc_Location loc;
- if ( _sWOL.ShapeType() == TopAbs_EDGE )
+ // compute new _LayerEdge::_cosin on EDGEs
+ double avgCosin = 0;
+ int nbCosin = 0;
+ gp_Vec inFaceDir;
+ for ( size_t iE = 0; iE < centerCurves.size(); ++iE )
{
- double f,l;
- Handle(Geom_Curve) curve = BRep_Tool::Curve( TopoDS::Edge( _sWOL ), loc, f,l);
- pPrev = curve->Value( pPrev.X() ).Transformed( loc );
+ _CentralCurveOnEdge& ceCurve = centerCurves[ iE ];
+ if ( ceCurve._adjFace.IsNull() )
+ continue;
+ for ( size_t iLE = 0; iLE < ceCurve._ledges.size(); ++iLE )
+ {
+ const SMDS_MeshNode* node = ceCurve._ledges[ iLE ]->_nodes[0];
+ inFaceDir = getFaceDir( ceCurve._adjFace, ceCurve._edge, node, helper, isOK );
+ if ( isOK )
+ {
+ double angle = inFaceDir.Angle( avgNormal ); // [0,PI]
+ ceCurve._ledges[ iLE ]->_cosin = Cos( angle );
+ avgCosin += ceCurve._ledges[ iLE ]->_cosin;
+ nbCosin++;
+ }
+ }
}
- else
+ if ( nbCosin > 0 )
+ avgCosin /= nbCosin;
+
+ // set _LayerEdge::_normal = avgNormal
+ id2eos = convFace._subIdToEOS.begin();
+ for ( ; id2eos != convFace._subIdToEOS.end(); ++id2eos )
{
- Handle(Geom_Surface) surface = BRep_Tool::Surface( TopoDS::Face(_sWOL), loc );
- pPrev = surface->Value( pPrev.X(), pPrev.Y() ).Transformed( loc );
+ _EdgesOnShape& eos = *(id2eos->second);
+ if ( eos.ShapeType() != TopAbs_EDGE )
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ eos._edges[ i ]->_cosin = avgCosin;
+
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ {
+ eos._edges[ i ]->SetNormal( avgNormal );
+ eos._edges[ i ]->Set( _LayerEdge::NORMAL_UPDATED );
+ }
}
- dir = SMESH_TNodeXYZ( _nodes.back() ) - pPrev.XYZ();
}
- segDir.SetLocation( pPrev );
- segDir.SetDirection( dir );
- segLen = dir.Modulus();
- }
+ else // if ( isSpherical )
+ {
+ // We suppose that centers of curvature at all points of the FACE
+ // lie on some curve, let's call it "central curve". For all _LayerEdge's
+ // having a common center of curvature we define the same new normal
+ // as a sum of normals of _LayerEdge's on EDGEs among them.
- return segDir;
-}
+ // get all centers of curvature for each EDGE
-//================================================================================
-/*!
- * \brief Return the last position of the target node on a FACE.
- * \param [in] F - the FACE this _LayerEdge is inflated along
- * \return gp_XY - result UV
- */
-//================================================================================
+ helper.SetSubShape( convFace._face );
+ _LayerEdge* vertexLEdges[2], **edgeLEdge, **edgeLEdgeEnd;
-gp_XY _LayerEdge::LastUV( const TopoDS_Face& F ) const
-{
- if ( F.IsSame( _sWOL )) // F is my FACE
- return gp_XY( _pos.back().X(), _pos.back().Y() );
+ TopExp_Explorer edgeExp( convFace._face, TopAbs_EDGE );
+ for ( int iE = 0; edgeExp.More(); edgeExp.Next(), ++iE )
+ {
+ const TopoDS_Edge& edge = TopoDS::Edge( edgeExp.Current() );
- if ( _sWOL.IsNull() || _sWOL.ShapeType() != TopAbs_EDGE ) // wrong call
- return gp_XY( 1e100, 1e100 );
+ // set adjacent FACE
+ centerCurves[ iE ].SetShapes( edge, convFace, data, helper );
- // _sWOL is EDGE of F; _pos.back().X() is the last U on the EDGE
- double f, l, u = _pos.back().X();
- Handle(Geom2d_Curve) C2d = BRep_Tool::CurveOnSurface( TopoDS::Edge(_sWOL), F, f,l);
- if ( !C2d.IsNull() && f <= u && u <= l )
- return C2d->Value( u ).XY();
+ // get _LayerEdge's of the EDGE
+ TGeomID edgeID = meshDS->ShapeToIndex( edge );
+ _EdgesOnShape* eos = data.GetShapeEdges( edgeID );
+ if ( !eos || eos->_edges.empty() )
+ {
+ // no _LayerEdge's on EDGE, use _LayerEdge's on VERTEXes
+ for ( int iV = 0; iV < 2; ++iV )
+ {
+ TopoDS_Vertex v = helper.IthVertex( iV, edge );
+ TGeomID vID = meshDS->ShapeToIndex( v );
+ eos = data.GetShapeEdges( vID );
+ vertexLEdges[ iV ] = eos->_edges[ 0 ];
+ }
+ edgeLEdge = &vertexLEdges[0];
+ edgeLEdgeEnd = edgeLEdge + 2;
- return gp_XY( 1e100, 1e100 );
-}
+ centerCurves[ iE ]._adjFace.Nullify();
+ }
+ else
+ {
+ if ( ! eos->_toSmooth )
+ data.SortOnEdge( edge, eos->_edges );
+ edgeLEdge = &eos->_edges[ 0 ];
+ edgeLEdgeEnd = edgeLEdge + eos->_edges.size();
+ vertexLEdges[0] = eos->_edges.front()->_2neibors->_edges[0];
+ vertexLEdges[1] = eos->_edges.back() ->_2neibors->_edges[1];
+
+ if ( ! eos->_sWOL.IsNull() )
+ centerCurves[ iE ]._adjFace.Nullify();
+ }
-//================================================================================
-/*!
- * \brief Test intersection of the last segment with a given triangle
- * using Moller-Trumbore algorithm
- * Intersection is detected if distance to intersection is less than _LayerEdge._len
- */
-//================================================================================
+ // Get curvature centers
-bool _LayerEdge::SegTriaInter( const gp_Ax1& lastSegment,
- const SMDS_MeshNode* n0,
- const SMDS_MeshNode* n1,
- const SMDS_MeshNode* n2,
- double& t,
- const double& EPSILON) const
-{
- //const double EPSILON = 1e-6;
+ centersBox.Clear();
- const gp_Pnt& orig = lastSegment.Location();
- const gp_Dir& dir = lastSegment.Direction();
+ if ( edgeLEdge[0]->IsOnEdge() &&
+ convFace.GetCenterOfCurvature( vertexLEdges[0], surfProp, helper, center ))
+ { // 1st VERTEX
+ centerCurves[ iE ].Append( center, vertexLEdges[0] );
+ centersBox.Add( center );
+ }
+ for ( ; edgeLEdge < edgeLEdgeEnd; ++edgeLEdge )
+ if ( convFace.GetCenterOfCurvature( *edgeLEdge, surfProp, helper, center ))
+ { // EDGE or VERTEXes
+ centerCurves[ iE ].Append( center, *edgeLEdge );
+ centersBox.Add( center );
+ }
+ if ( edgeLEdge[-1]->IsOnEdge() &&
+ convFace.GetCenterOfCurvature( vertexLEdges[1], surfProp, helper, center ))
+ { // 2nd VERTEX
+ centerCurves[ iE ].Append( center, vertexLEdges[1] );
+ centersBox.Add( center );
+ }
+ centerCurves[ iE ]._isDegenerated =
+ ( centersBox.IsVoid() || centersBox.SquareExtent() < 1e-6 * nodesBox.SquareExtent() );
- SMESH_TNodeXYZ vert0( n0 );
- SMESH_TNodeXYZ vert1( n1 );
- SMESH_TNodeXYZ vert2( n2 );
+ } // loop on EDGES of convFace._face to set up data of centerCurves
- /* calculate distance from vert0 to ray origin */
- gp_XYZ tvec = orig.XYZ() - vert0;
+ // Compute new normals for _LayerEdge's on EDGEs
- //if ( tvec * dir > EPSILON )
- // intersected face is at back side of the temporary face this _LayerEdge belongs to
- //return false;
+ double avgCosin = 0;
+ int nbCosin = 0;
+ gp_Vec inFaceDir;
+ for ( size_t iE1 = 0; iE1 < centerCurves.size(); ++iE1 )
+ {
+ _CentralCurveOnEdge& ceCurve = centerCurves[ iE1 ];
+ if ( ceCurve._isDegenerated )
+ continue;
+ const vector< gp_Pnt >& centers = ceCurve._curvaCenters;
+ vector< gp_XYZ > & newNormals = ceCurve._normals;
+ for ( size_t iC1 = 0; iC1 < centers.size(); ++iC1 )
+ {
+ isOK = false;
+ for ( size_t iE2 = 0; iE2 < centerCurves.size() && !isOK; ++iE2 )
+ {
+ if ( iE1 != iE2 )
+ isOK = centerCurves[ iE2 ].FindNewNormal( centers[ iC1 ], newNormals[ iC1 ]);
+ }
+ if ( isOK && !ceCurve._adjFace.IsNull() )
+ {
+ // compute new _LayerEdge::_cosin
+ const SMDS_MeshNode* node = ceCurve._ledges[ iC1 ]->_nodes[0];
+ inFaceDir = getFaceDir( ceCurve._adjFace, ceCurve._edge, node, helper, isOK );
+ if ( isOK )
+ {
+ double angle = inFaceDir.Angle( newNormals[ iC1 ] ); // [0,PI]
+ ceCurve._ledges[ iC1 ]->_cosin = Cos( angle );
+ avgCosin += ceCurve._ledges[ iC1 ]->_cosin;
+ nbCosin++;
+ }
+ }
+ }
+ }
+ // set new normals to _LayerEdge's of NOT degenerated central curves
+ for ( size_t iE = 0; iE < centerCurves.size(); ++iE )
+ {
+ if ( centerCurves[ iE ]._isDegenerated )
+ continue;
+ for ( size_t iLE = 0; iLE < centerCurves[ iE ]._ledges.size(); ++iLE )
+ {
+ centerCurves[ iE ]._ledges[ iLE ]->SetNormal( centerCurves[ iE ]._normals[ iLE ]);
+ centerCurves[ iE ]._ledges[ iLE ]->Set( _LayerEdge::NORMAL_UPDATED );
+ }
+ }
+ // set new normals to _LayerEdge's of degenerated central curves
+ for ( size_t iE = 0; iE < centerCurves.size(); ++iE )
+ {
+ if ( !centerCurves[ iE ]._isDegenerated ||
+ centerCurves[ iE ]._ledges.size() < 3 )
+ continue;
+ // new normal is an average of new normals at VERTEXes that
+ // was computed on non-degenerated _CentralCurveOnEdge's
+ gp_XYZ newNorm = ( centerCurves[ iE ]._ledges.front()->_normal +
+ centerCurves[ iE ]._ledges.back ()->_normal );
+ double sz = newNorm.Modulus();
+ if ( sz < 1e-200 )
+ continue;
+ newNorm /= sz;
+ double newCosin = ( 0.5 * centerCurves[ iE ]._ledges.front()->_cosin +
+ 0.5 * centerCurves[ iE ]._ledges.back ()->_cosin );
+ for ( size_t iLE = 1, nb = centerCurves[ iE ]._ledges.size() - 1; iLE < nb; ++iLE )
+ {
+ centerCurves[ iE ]._ledges[ iLE ]->SetNormal( newNorm );
+ centerCurves[ iE ]._ledges[ iLE ]->_cosin = newCosin;
+ centerCurves[ iE ]._ledges[ iLE ]->Set( _LayerEdge::NORMAL_UPDATED );
+ }
+ }
- gp_XYZ edge1 = vert1 - vert0;
- gp_XYZ edge2 = vert2 - vert0;
+ // Find new normals for _LayerEdge's based on FACE
- /* begin calculating determinant - also used to calculate U parameter */
- gp_XYZ pvec = dir.XYZ() ^ edge2;
+ if ( nbCosin > 0 )
+ avgCosin /= nbCosin;
+ const TGeomID faceID = meshDS->ShapeToIndex( convFace._face );
+ map< TGeomID, _EdgesOnShape* >::iterator id2eos = convFace._subIdToEOS.find( faceID );
+ if ( id2eos != convFace._subIdToEOS.end() )
+ {
+ int iE = 0;
+ gp_XYZ newNorm;
+ _EdgesOnShape& eos = * ( id2eos->second );
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ {
+ _LayerEdge* ledge = eos._edges[ i ];
+ if ( !convFace.GetCenterOfCurvature( ledge, surfProp, helper, center ))
+ continue;
+ for ( size_t i = 0; i < centerCurves.size(); ++i, ++iE )
+ {
+ iE = iE % centerCurves.size();
+ if ( centerCurves[ iE ]._isDegenerated )
+ continue;
+ newNorm.SetCoord( 0,0,0 );
+ if ( centerCurves[ iE ].FindNewNormal( center, newNorm ))
+ {
+ ledge->SetNormal( newNorm );
+ ledge->_cosin = avgCosin;
+ ledge->Set( _LayerEdge::NORMAL_UPDATED );
+ break;
+ }
+ }
+ }
+ }
- /* if determinant is near zero, ray lies in plane of triangle */
- double det = edge1 * pvec;
+ } // not a quasi-spherical FACE
- if (det > -EPSILON && det < EPSILON)
- return false;
+ // Update _LayerEdge's data according to a new normal
- /* calculate U parameter and test bounds */
- double u = ( tvec * pvec ) / det;
- //if (u < 0.0 || u > 1.0)
- if (u < -EPSILON || u > 1.0 + EPSILON)
- return false;
+ dumpFunction(SMESH_Comment("updateNormalsOfConvexFaces")<<data._index
+ <<"_F"<<meshDS->ShapeToIndex( convFace._face ));
- /* prepare to test V parameter */
- gp_XYZ qvec = tvec ^ edge1;
+ id2eos = convFace._subIdToEOS.begin();
+ for ( ; id2eos != convFace._subIdToEOS.end(); ++id2eos )
+ {
+ _EdgesOnShape& eos = * ( id2eos->second );
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ {
+ _LayerEdge* & ledge = eos._edges[ i ];
+ double len = ledge->_len;
+ ledge->InvalidateStep( stepNb + 1, eos, /*restoreLength=*/true );
+ ledge->SetCosin( ledge->_cosin );
+ ledge->SetNewLength( len, eos, helper );
+ }
+ if ( eos.ShapeType() != TopAbs_FACE )
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ {
+ _LayerEdge* ledge = eos._edges[ i ];
+ for ( size_t iN = 0; iN < ledge->_neibors.size(); ++iN )
+ {
+ _LayerEdge* neibor = ledge->_neibors[iN];
+ if ( neibor->_nodes[0]->GetPosition()->GetDim() == 2 )
+ {
+ neibor->Set( _LayerEdge::NEAR_BOUNDARY );
+ neibor->Set( _LayerEdge::MOVED );
+ neibor->SetSmooLen( neibor->_len );
+ }
+ }
+ }
+ } // loop on sub-shapes of convFace._face
- /* calculate V parameter and test bounds */
- double v = (dir.XYZ() * qvec) / det;
- //if ( v < 0.0 || u + v > 1.0 )
- if ( v < -EPSILON || u + v > 1.0 + EPSILON)
- return false;
+ // Find FACEs adjacent to convFace._face that got necessity to smooth
+ // as a result of normals modification
- /* calculate t, ray intersects triangle */
- t = (edge2 * qvec) / det;
+ set< _EdgesOnShape* > adjFacesToSmooth;
+ for ( size_t iE = 0; iE < centerCurves.size(); ++iE )
+ {
+ if ( centerCurves[ iE ]._adjFace.IsNull() ||
+ centerCurves[ iE ]._adjFaceToSmooth )
+ continue;
+ for ( size_t iLE = 0; iLE < centerCurves[ iE ]._ledges.size(); ++iLE )
+ {
+ if ( centerCurves[ iE ]._ledges[ iLE ]->_cosin > theMinSmoothCosin )
+ {
+ adjFacesToSmooth.insert( data.GetShapeEdges( centerCurves[ iE ]._adjFace ));
+ break;
+ }
+ }
+ }
+ data.AddShapesToSmooth( adjFacesToSmooth );
- //return true;
- return t > 0.;
+ dumpFunctionEnd();
+
+
+ } // loop on data._convexFaces
+
+ return true;
}
//================================================================================
/*!
- * \brief Perform smooth of _LayerEdge's based on EDGE's
- * \retval bool - true if node has been moved
+ * \brief Return max curvature of a FACE
*/
//================================================================================
-bool _LayerEdge::SmoothOnEdge(Handle(Geom_Surface)& surface,
- const TopoDS_Face& F,
- SMESH_MesherHelper& helper)
+double _ConvexFace::GetMaxCurvature( _SolidData& data,
+ _EdgesOnShape& eof,
+ BRepLProp_SLProps& surfProp,
+ SMESH_MesherHelper& helper)
{
- ASSERT( IsOnEdge() );
+ double maxCurvature = 0;
- SMDS_MeshNode* tgtNode = const_cast<SMDS_MeshNode*>( _nodes.back() );
- SMESH_TNodeXYZ oldPos( tgtNode );
- double dist01, distNewOld;
-
- SMESH_TNodeXYZ p0( _2neibors->tgtNode(0));
- SMESH_TNodeXYZ p1( _2neibors->tgtNode(1));
- dist01 = p0.Distance( _2neibors->tgtNode(1) );
+ TopoDS_Face F = TopoDS::Face( eof._shape );
- gp_Pnt newPos = p0 * _2neibors->_wgt[0] + p1 * _2neibors->_wgt[1];
- double lenDelta = 0;
- if ( _curvature )
+ const int nbTestPnt = 5;
+ const double oriFactor = ( F.Orientation() == TopAbs_REVERSED ? +1. : -1. );
+ SMESH_subMeshIteratorPtr smIt = eof._subMesh->getDependsOnIterator(/*includeSelf=*/true);
+ while ( smIt->more() )
{
- //lenDelta = _curvature->lenDelta( _len );
- lenDelta = _curvature->lenDeltaByDist( dist01 );
- newPos.ChangeCoord() += _normal * lenDelta;
- }
+ SMESH_subMesh* sm = smIt->next();
+ const TGeomID subID = sm->GetId();
- distNewOld = newPos.Distance( oldPos );
+ // find _LayerEdge's of a sub-shape
+ _EdgesOnShape* eos;
+ if (( eos = data.GetShapeEdges( subID )))
+ this->_subIdToEOS.insert( make_pair( subID, eos ));
+ else
+ continue;
- if ( F.IsNull() )
- {
- if ( _2neibors->_plnNorm )
+ // check concavity and curvature and limit data._stepSize
+ const double minCurvature =
+ 1. / ( eos->_hyp.GetTotalThickness() * ( 1 + theThickToIntersection ));
+ size_t iStep = Max( 1, eos->_edges.size() / nbTestPnt );
+ for ( size_t i = 0; i < eos->_edges.size(); i += iStep )
{
- // put newPos on the plane defined by source node and _plnNorm
- gp_XYZ new2src = SMESH_TNodeXYZ( _nodes[0] ) - newPos.XYZ();
- double new2srcProj = (*_2neibors->_plnNorm) * new2src;
- newPos.ChangeCoord() += (*_2neibors->_plnNorm) * new2srcProj;
- }
- tgtNode->setXYZ( newPos.X(), newPos.Y(), newPos.Z() );
- _pos.back() = newPos.XYZ();
- }
- else
- {
- tgtNode->setXYZ( newPos.X(), newPos.Y(), newPos.Z() );
- gp_XY uv( Precision::Infinite(), 0 );
- helper.CheckNodeUV( F, tgtNode, uv, 1e-10, /*force=*/true );
- _pos.back().SetCoord( uv.X(), uv.Y(), 0 );
-
- newPos = surface->Value( uv.X(), uv.Y() );
- tgtNode->setXYZ( newPos.X(), newPos.Y(), newPos.Z() );
- }
+ gp_XY uv = helper.GetNodeUV( F, eos->_edges[ i ]->_nodes[0] );
+ surfProp.SetParameters( uv.X(), uv.Y() );
+ if ( surfProp.IsCurvatureDefined() )
+ {
+ double curvature = Max( surfProp.MaxCurvature() * oriFactor,
+ surfProp.MinCurvature() * oriFactor );
+ maxCurvature = Max( maxCurvature, curvature );
- // commented for IPAL0052478
- // if ( _curvature && lenDelta < 0 )
- // {
- // gp_Pnt prevPos( _pos[ _pos.size()-2 ]);
- // _len -= prevPos.Distance( oldPos );
- // _len += prevPos.Distance( newPos );
- // }
- bool moved = distNewOld > dist01/50;
- //if ( moved )
- dumpMove( tgtNode ); // debug
+ if ( curvature > minCurvature )
+ this->_isTooCurved = true;
+ }
+ }
+ } // loop on sub-shapes of the FACE
- return moved;
+ return maxCurvature;
}
//================================================================================
/*!
- * \brief Perform laplacian smooth in 3D of nodes inflated from FACE
- * \retval bool - true if _tgtNode has been moved
+ * \brief Finds a center of curvature of a surface at a _LayerEdge
*/
//================================================================================
-bool _LayerEdge::Smooth(int& badNb, const int step, const bool isConcaveFace )
+bool _ConvexFace::GetCenterOfCurvature( _LayerEdge* ledge,
+ BRepLProp_SLProps& surfProp,
+ SMESH_MesherHelper& helper,
+ gp_Pnt & center ) const
{
- bool moved = false;
- if ( _simplices.size() < 2 )
- return moved; // _LayerEdge inflated along EDGE or FACE
+ gp_XY uv = helper.GetNodeUV( _face, ledge->_nodes[0] );
+ surfProp.SetParameters( uv.X(), uv.Y() );
+ if ( !surfProp.IsCurvatureDefined() )
+ return false;
- const gp_XYZ& curPos ( _pos.back() );
- const gp_XYZ& prevPos( _pos[ _pos.size()-2 ]);
+ const double oriFactor = ( _face.Orientation() == TopAbs_REVERSED ? +1. : -1. );
+ double surfCurvatureMax = surfProp.MaxCurvature() * oriFactor;
+ double surfCurvatureMin = surfProp.MinCurvature() * oriFactor;
+ if ( surfCurvatureMin > surfCurvatureMax )
+ center = surfProp.Value().Translated( surfProp.Normal().XYZ() / surfCurvatureMin * oriFactor );
+ else
+ center = surfProp.Value().Translated( surfProp.Normal().XYZ() / surfCurvatureMax * oriFactor );
- // quality metrics (orientation) of tetras around _tgtNode
- int nbOkBefore = 0;
- double vol, minVolBefore = 1e100;
- for ( size_t i = 0; i < _simplices.size(); ++i )
+ return true;
+}
+
+//================================================================================
+/*!
+ * \brief Check that prisms are not distorted
+ */
+//================================================================================
+
+bool _ConvexFace::CheckPrisms() const
+{
+ double vol = 0;
+ for ( size_t i = 0; i < _simplexTestEdges.size(); ++i )
{
- nbOkBefore += _simplices[i].IsForward( _nodes[0], &curPos, vol );
- minVolBefore = Min( minVolBefore, vol );
+ const _LayerEdge* edge = _simplexTestEdges[i];
+ SMESH_TNodeXYZ tgtXYZ( edge->_nodes.back() );
+ for ( size_t j = 0; j < edge->_simplices.size(); ++j )
+ if ( !edge->_simplices[j].IsForward( edge->_nodes[0], tgtXYZ, vol ))
+ {
+ debugMsg( "Bad simplex of _simplexTestEdges ("
+ << " "<< edge->_nodes[0]->GetID()<< " "<< tgtXYZ._node->GetID()
+ << " "<< edge->_simplices[j]._nPrev->GetID()
+ << " "<< edge->_simplices[j]._nNext->GetID() << " )" );
+ return false;
+ }
}
- int nbBad = _simplices.size() - nbOkBefore;
+ return true;
+}
- // compute new position for the last _pos using different _funs
- gp_XYZ newPos, bestNewPos;
- for ( int iFun = -1; iFun < theNbSmooFuns; ++iFun )
- {
- if ( iFun < 0 )
- newPos = (this->*_smooFunction)(); // fun chosen by ChooseSmooFunction()
- else if ( _funs[ iFun ] == _smooFunction )
- continue; // _smooFunction again
- else if ( step > 0 )
- newPos = (this->*_funs[ iFun ])(); // try other smoothing fun
- else
- break; // let "easy" functions improve elements around distorted ones
+//================================================================================
+/*!
+ * \brief Try to compute a new normal by interpolating normals of _LayerEdge's
+ * stored in this _CentralCurveOnEdge.
+ * \param [in] center - curvature center of a point of another _CentralCurveOnEdge.
+ * \param [in,out] newNormal - current normal at this point, to be redefined
+ * \return bool - true if succeeded.
+ */
+//================================================================================
- if ( _curvature )
- {
- double delta = _curvature->lenDelta( _len );
- if ( delta > 0 )
- newPos += _normal * delta;
- else
- {
- double segLen = _normal * ( newPos - prevPos );
- if ( segLen + delta > 0 )
- newPos += _normal * delta;
- }
- // double segLenChange = _normal * ( curPos - newPos );
- // newPos += 0.5 * _normal * segLenChange;
- }
+bool _CentralCurveOnEdge::FindNewNormal( const gp_Pnt& center, gp_XYZ& newNormal )
+{
+ if ( this->_isDegenerated )
+ return false;
- int nbOkAfter = 0;
- double minVolAfter = 1e100;
- for ( size_t i = 0; i < _simplices.size(); ++i )
- {
- nbOkAfter += _simplices[i].IsForward( _nodes[0], &newPos, vol );
- minVolAfter = Min( minVolAfter, vol );
- }
- // get worse?
- if ( nbOkAfter < nbOkBefore )
+ // find two centers the given one lies between
+
+ for ( size_t i = 0, nb = _curvaCenters.size()-1; i < nb; ++i )
+ {
+ double sl2 = 1.001 * _segLength2[ i ];
+
+ double d1 = center.SquareDistance( _curvaCenters[ i ]);
+ if ( d1 > sl2 )
continue;
- if (( isConcaveFace ) &&
- ( nbOkAfter == nbOkBefore ) &&
- //( iFun > -1 || nbOkAfter < _simplices.size() ) &&
- ( minVolAfter <= minVolBefore ))
+
+ double d2 = center.SquareDistance( _curvaCenters[ i+1 ]);
+ if ( d2 > sl2 || d2 + d1 < 1e-100 )
continue;
- SMDS_MeshNode* n = const_cast< SMDS_MeshNode* >( _nodes.back() );
+ d1 = Sqrt( d1 );
+ d2 = Sqrt( d2 );
+ double r = d1 / ( d1 + d2 );
+ gp_XYZ norm = (( 1. - r ) * _ledges[ i ]->_normal +
+ ( r ) * _ledges[ i+1 ]->_normal );
+ norm.Normalize();
- // commented for IPAL0052478
- // _len -= prevPos.Distance(SMESH_TNodeXYZ( n ));
- // _len += prevPos.Distance(newPos);
+ newNormal += norm;
+ double sz = newNormal.Modulus();
+ if ( sz < 1e-200 )
+ break;
+ newNormal /= sz;
+ return true;
+ }
+ return false;
+}
- n->setXYZ( newPos.X(), newPos.Y(), newPos.Z());
- _pos.back() = newPos;
- moved = true;
- dumpMoveComm( n, _funNames[ iFun < 0 ? smooFunID() : iFun ]);
+//================================================================================
+/*!
+ * \brief Set shape members
+ */
+//================================================================================
- nbBad = _simplices.size() - nbOkAfter;
+void _CentralCurveOnEdge::SetShapes( const TopoDS_Edge& edge,
+ const _ConvexFace& convFace,
+ _SolidData& data,
+ SMESH_MesherHelper& helper)
+{
+ _edge = edge;
- if ( iFun > -1 )
+ PShapeIteratorPtr fIt = helper.GetAncestors( edge, *helper.GetMesh(), TopAbs_FACE );
+ while ( const TopoDS_Shape* F = fIt->next())
+ if ( !convFace._face.IsSame( *F ))
{
- //_smooFunction = _funs[ iFun ];
- // cout << "# " << _funNames[ iFun ] << "\t N:" << _nodes.back()->GetID()
- // << "\t nbBad: " << _simplices.size() - nbOkAfter
- // << " minVol: " << minVolAfter
- // << " " << newPos.X() << " " << newPos.Y() << " " << newPos.Z()
- // << endl;
- minVolBefore = minVolAfter;
- nbOkBefore = nbOkAfter;
- continue; // look for a better function
+ _adjFace = TopoDS::Face( *F );
+ _adjFaceToSmooth = false;
+ // _adjFace already in a smoothing queue ?
+ if ( _EdgesOnShape* eos = data.GetShapeEdges( _adjFace ))
+ _adjFaceToSmooth = eos->_toSmooth;
+ break;
}
-
- break;
-
- } // loop on smoothing functions
-
- badNb += nbBad;
- return moved;
}
//================================================================================
/*!
- * \brief Chooses a smoothing technic giving a position most close to an initial one.
- * For a correct result, _simplices must contain nodes lying on geometry.
+ * \brief Looks for intersection of it's last segment with faces
+ * \param distance - returns shortest distance from the last node to intersection
*/
//================================================================================
-void _LayerEdge::ChooseSmooFunction( const set< TGeomID >& concaveVertices,
- const TNode2Edge& n2eMap)
+bool _LayerEdge::FindIntersection( SMESH_ElementSearcher& searcher,
+ double & distance,
+ const double& epsilon,
+ _EdgesOnShape& eos,
+ const SMDS_MeshElement** intFace)
{
- if ( _smooFunction ) return;
+ vector< const SMDS_MeshElement* > suspectFaces;
+ double segLen;
+ gp_Ax1 lastSegment = LastSegment( segLen, eos );
+ searcher.GetElementsNearLine( lastSegment, SMDSAbs_Face, suspectFaces );
- // use smoothNefPolygon() near concaveVertices
- if ( !concaveVertices.empty() )
+ bool segmentIntersected = false;
+ distance = Precision::Infinite();
+ int iFace = -1; // intersected face
+ for ( size_t j = 0 ; j < suspectFaces.size() /*&& !segmentIntersected*/; ++j )
{
- for ( size_t i = 0; i < _simplices.size(); ++i )
+ const SMDS_MeshElement* face = suspectFaces[j];
+ if ( face->GetNodeIndex( _nodes.back() ) >= 0 ||
+ face->GetNodeIndex( _nodes[0] ) >= 0 )
+ continue; // face sharing _LayerEdge node
+ const int nbNodes = face->NbCornerNodes();
+ bool intFound = false;
+ double dist;
+ SMDS_MeshElement::iterator nIt = face->begin_nodes();
+ if ( nbNodes == 3 )
{
- if ( concaveVertices.count( _simplices[i]._nPrev->getshapeId() ))
- {
- _smooFunction = _funs[ FUN_NEFPOLY ];
-
- // set FUN_CENTROIDAL to neighbor edges
- TNode2Edge::const_iterator n2e;
- for ( i = 0; i < _simplices.size(); ++i )
- {
- if (( _simplices[i]._nPrev->GetPosition()->GetDim() == 2 ) &&
- (( n2e = n2eMap.find( _simplices[i]._nPrev )) != n2eMap.end() ))
- {
- n2e->second->_smooFunction = _funs[ FUN_CENTROIDAL ];
- }
- }
- return;
- }
+ intFound = SegTriaInter( lastSegment, *nIt++, *nIt++, *nIt++, dist, epsilon );
}
- //}
-
- // this coice is done only if ( !concaveVertices.empty() ) for Grids/smesh/bugs_19/X1
- // where the nodes are smoothed too far along a sphere thus creating
- // inverted _simplices
- double dist[theNbSmooFuns];
- //double coef[theNbSmooFuns] = { 1., 1.2, 1.4, 1.4 };
- double coef[theNbSmooFuns] = { 1., 1., 1., 1. };
-
- double minDist = Precision::Infinite();
- gp_Pnt p = SMESH_TNodeXYZ( _nodes[0] );
- for ( int i = 0; i < FUN_NEFPOLY; ++i )
+ else
{
- gp_Pnt newP = (this->*_funs[i])();
- dist[i] = p.SquareDistance( newP );
- if ( dist[i]*coef[i] < minDist )
+ const SMDS_MeshNode* tria[3];
+ tria[0] = *nIt++;
+ tria[1] = *nIt++;
+ for ( int n2 = 2; n2 < nbNodes && !intFound; ++n2 )
{
- _smooFunction = _funs[i];
- minDist = dist[i]*coef[i];
+ tria[2] = *nIt++;
+ intFound = SegTriaInter(lastSegment, tria[0], tria[1], tria[2], dist, epsilon );
+ tria[1] = tria[2];
}
}
+ if ( intFound )
+ {
+ if ( dist < segLen*(1.01) && dist > -(_len*_lenFactor-segLen) )
+ segmentIntersected = true;
+ if ( distance > dist )
+ distance = dist, iFace = j;
+ }
}
- else
+ if ( intFace ) *intFace = ( iFace != -1 ) ? suspectFaces[iFace] : 0;
+
+ distance -= segLen;
+
+ if ( segmentIntersected )
{
- _smooFunction = _funs[ FUN_LAPLACIAN ];
+#ifdef __myDEBUG
+ SMDS_MeshElement::iterator nIt = suspectFaces[iFace]->begin_nodes();
+ gp_XYZ intP( lastSegment.Location().XYZ() + lastSegment.Direction().XYZ() * ( distance+segLen ));
+ cout << "nodes: tgt " << _nodes.back()->GetID() << " src " << _nodes[0]->GetID()
+ << ", intersection with face ("
+ << (*nIt++)->GetID()<<" "<< (*nIt++)->GetID()<<" "<< (*nIt++)->GetID()
+ << ") at point (" << intP.X() << ", " << intP.Y() << ", " << intP.Z()
+ << ") distance = " << distance << endl;
+#endif
}
- // int minDim = 3;
- // for ( size_t i = 0; i < _simplices.size(); ++i )
- // minDim = Min( minDim, _simplices[i]._nPrev->GetPosition()->GetDim() );
- // if ( minDim == 0 )
- // _smooFunction = _funs[ FUN_CENTROIDAL ];
- // else if ( minDim == 1 )
- // _smooFunction = _funs[ FUN_CENTROIDAL ];
-
- // int iMin;
- // for ( int i = 0; i < FUN_NB; ++i )
- // {
- // //cout << dist[i] << " ";
- // if ( _smooFunction == _funs[i] ) {
- // iMin = i;
- // //debugMsg( fNames[i] );
- // break;
- // }
- // }
- // cout << _funNames[ iMin ] << "\t N:" << _nodes.back()->GetID() << endl;
+ return segmentIntersected;
}
//================================================================================
/*!
- * \brief Returns a name of _SmooFunction
+ * \brief Returns a point used to check orientation of _simplices
*/
//================================================================================
-int _LayerEdge::smooFunID( _LayerEdge::PSmooFun fun) const
+gp_XYZ _LayerEdge::PrevCheckPos( _EdgesOnShape* eos ) const
{
- if ( !fun )
- fun = _smooFunction;
- for ( int i = 0; i < theNbSmooFuns; ++i )
- if ( fun == _funs[i] )
- return i;
+ size_t i = Is( NORMAL_UPDATED ) && IsOnFace() ? _pos.size()-2 : 0;
- return theNbSmooFuns;
+ if ( !eos || eos->_sWOL.IsNull() )
+ return _pos[ i ];
+
+ if ( eos->SWOLType() == TopAbs_EDGE )
+ {
+ return BRepAdaptor_Curve( TopoDS::Edge( eos->_sWOL )).Value( _pos[i].X() ).XYZ();
+ }
+ //else // TopAbs_FACE
+
+ return BRepAdaptor_Surface( TopoDS::Face( eos->_sWOL )).Value(_pos[i].X(), _pos[i].Y() ).XYZ();
}
//================================================================================
/*!
- * \brief Computes a new node position using Laplacian smoothing
+ * \brief Returns size and direction of the last segment
*/
//================================================================================
-gp_XYZ _LayerEdge::smoothLaplacian()
+gp_Ax1 _LayerEdge::LastSegment(double& segLen, _EdgesOnShape& eos) const
{
- gp_XYZ newPos (0,0,0);
- for ( size_t i = 0; i < _simplices.size(); ++i )
- newPos += SMESH_TNodeXYZ( _simplices[i]._nPrev );
- newPos /= _simplices.size();
+ // find two non-coincident positions
+ gp_XYZ orig = _pos.back();
+ gp_XYZ vec;
+ int iPrev = _pos.size() - 2;
+ //const double tol = ( _len > 0 ) ? 0.3*_len : 1e-100; // adjusted for IPAL52478 + PAL22576
+ const double tol = ( _len > 0 ) ? ( 1e-6 * _len ) : 1e-100;
+ while ( iPrev >= 0 )
+ {
+ vec = orig - _pos[iPrev];
+ if ( vec.SquareModulus() > tol*tol )
+ break;
+ else
+ iPrev--;
+ }
- return newPos;
+ // make gp_Ax1
+ gp_Ax1 segDir;
+ if ( iPrev < 0 )
+ {
+ segDir.SetLocation( SMESH_TNodeXYZ( _nodes[0] ));
+ segDir.SetDirection( _normal );
+ segLen = 0;
+ }
+ else
+ {
+ gp_Pnt pPrev = _pos[ iPrev ];
+ if ( !eos._sWOL.IsNull() )
+ {
+ TopLoc_Location loc;
+ if ( eos.SWOLType() == TopAbs_EDGE )
+ {
+ double f,l;
+ Handle(Geom_Curve) curve = BRep_Tool::Curve( TopoDS::Edge( eos._sWOL ), loc, f,l);
+ pPrev = curve->Value( pPrev.X() ).Transformed( loc );
+ }
+ else
+ {
+ Handle(Geom_Surface) surface = BRep_Tool::Surface( TopoDS::Face( eos._sWOL ), loc );
+ pPrev = surface->Value( pPrev.X(), pPrev.Y() ).Transformed( loc );
+ }
+ vec = SMESH_TNodeXYZ( _nodes.back() ) - pPrev.XYZ();
+ }
+ segDir.SetLocation( pPrev );
+ segDir.SetDirection( vec );
+ segLen = vec.Modulus();
+ }
+
+ return segDir;
}
//================================================================================
/*!
- * \brief Computes a new node position using angular-based smoothing
+ * \brief Return the last (or \a which) position of the target node on a FACE.
+ * \param [in] F - the FACE this _LayerEdge is inflated along
+ * \param [in] which - index of position
+ * \return gp_XY - result UV
*/
//================================================================================
-gp_XYZ _LayerEdge::smoothAngular()
+gp_XY _LayerEdge::LastUV( const TopoDS_Face& F, _EdgesOnShape& eos, int which ) const
{
- vector< gp_Vec > edgeDir; edgeDir. reserve( _simplices.size() + 1);
- vector< double > edgeSize; edgeSize.reserve( _simplices.size() );
- vector< gp_XYZ > points; points. reserve( _simplices.size() );
+ if ( F.IsSame( eos._sWOL )) // F is my FACE
+ return gp_XY( _pos.back().X(), _pos.back().Y() );
- gp_XYZ pPrev = SMESH_TNodeXYZ( _simplices.back()._nPrev );
- gp_XYZ pN( 0,0,0 );
- for ( size_t i = 0; i < _simplices.size(); ++i )
+ if ( eos.SWOLType() != TopAbs_EDGE ) // wrong call
+ return gp_XY( 1e100, 1e100 );
+
+ // _sWOL is EDGE of F; _pos.back().X() is the last U on the EDGE
+ double f, l, u = _pos[ which < 0 ? _pos.size()-1 : which ].X();
+ Handle(Geom2d_Curve) C2d = BRep_Tool::CurveOnSurface( TopoDS::Edge(eos._sWOL), F, f,l);
+ if ( !C2d.IsNull() && f <= u && u <= l )
+ return C2d->Value( u ).XY();
+
+ return gp_XY( 1e100, 1e100 );
+}
+
+//================================================================================
+/*!
+ * \brief Test intersection of the last segment with a given triangle
+ * using Moller-Trumbore algorithm
+ * Intersection is detected if distance to intersection is less than _LayerEdge._len
+ */
+//================================================================================
+
+bool _LayerEdge::SegTriaInter( const gp_Ax1& lastSegment,
+ const gp_XYZ& vert0,
+ const gp_XYZ& vert1,
+ const gp_XYZ& vert2,
+ double& t,
+ const double& EPSILON) const
+{
+ const gp_Pnt& orig = lastSegment.Location();
+ const gp_Dir& dir = lastSegment.Direction();
+
+ /* calculate distance from vert0 to ray origin */
+ //gp_XYZ tvec = orig.XYZ() - vert0;
+
+ //if ( tvec * dir > EPSILON )
+ // intersected face is at back side of the temporary face this _LayerEdge belongs to
+ //return false;
+
+ gp_XYZ edge1 = vert1 - vert0;
+ gp_XYZ edge2 = vert2 - vert0;
+
+ /* begin calculating determinant - also used to calculate U parameter */
+ gp_XYZ pvec = dir.XYZ() ^ edge2;
+
+ /* if determinant is near zero, ray lies in plane of triangle */
+ double det = edge1 * pvec;
+
+ const double ANGL_EPSILON = 1e-12;
+ if ( det > -ANGL_EPSILON && det < ANGL_EPSILON )
+ return false;
+
+ /* calculate distance from vert0 to ray origin */
+ gp_XYZ tvec = orig.XYZ() - vert0;
+
+ /* calculate U parameter and test bounds */
+ double u = ( tvec * pvec ) / det;
+ //if (u < 0.0 || u > 1.0)
+ if ( u < -EPSILON || u > 1.0 + EPSILON )
+ return false;
+
+ /* prepare to test V parameter */
+ gp_XYZ qvec = tvec ^ edge1;
+
+ /* calculate V parameter and test bounds */
+ double v = (dir.XYZ() * qvec) / det;
+ //if ( v < 0.0 || u + v > 1.0 )
+ if ( v < -EPSILON || u + v > 1.0 + EPSILON )
+ return false;
+
+ /* calculate t, ray intersects triangle */
+ t = (edge2 * qvec) / det;
+
+ //return true;
+ return t > 0.;
+}
+
+//================================================================================
+/*!
+ * \brief _LayerEdge, located at a concave VERTEX of a FACE, moves target nodes of
+ * neighbor _LayerEdge's by it's own inflation vector.
+ * \param [in] eov - EOS of the VERTEX
+ * \param [in] eos - EOS of the FACE
+ * \param [in] step - inflation step
+ * \param [in,out] badSmooEdges - tangled _LayerEdge's
+ */
+//================================================================================
+
+void _LayerEdge::MoveNearConcaVer( const _EdgesOnShape* eov,
+ const _EdgesOnShape* eos,
+ const int step,
+ vector< _LayerEdge* > & badSmooEdges )
+{
+ // check if any of _neibors is in badSmooEdges
+ if ( std::find_first_of( _neibors.begin(), _neibors.end(),
+ badSmooEdges.begin(), badSmooEdges.end() ) == _neibors.end() )
+ return;
+
+ // get all edges to move
+
+ set< _LayerEdge* > edges;
+
+ // find a distance between _LayerEdge on VERTEX and its neighbors
+ gp_XYZ curPosV = SMESH_TNodeXYZ( _nodes.back() );
+ double dist2 = 0;
+ for ( size_t i = 0; i < _neibors.size(); ++i )
{
- gp_XYZ p = SMESH_TNodeXYZ( _simplices[i]._nPrev );
- edgeDir.push_back( p - pPrev );
- edgeSize.push_back( edgeDir.back().Magnitude() );
- //double edgeSize = edgeDir.back().Magnitude();
- if ( edgeSize.back() < numeric_limits<double>::min() )
+ _LayerEdge* nEdge = _neibors[i];
+ if ( nEdge->_nodes[0]->getshapeId() == eos->_shapeID )
{
- edgeDir.pop_back();
- edgeSize.pop_back();
+ edges.insert( nEdge );
+ dist2 = Max( dist2, ( curPosV - nEdge->_pos.back() ).SquareModulus() );
}
- else
+ }
+ // add _LayerEdge's close to curPosV
+ size_t nbE;
+ do {
+ nbE = edges.size();
+ for ( set< _LayerEdge* >::iterator e = edges.begin(); e != edges.end(); ++e )
{
- edgeDir.back() /= edgeSize.back();
- points.push_back( p );
- pN += p;
+ _LayerEdge* edgeF = *e;
+ for ( size_t i = 0; i < edgeF->_neibors.size(); ++i )
+ {
+ _LayerEdge* nEdge = edgeF->_neibors[i];
+ if ( nEdge->_nodes[0]->getshapeId() == eos->_shapeID &&
+ dist2 > ( curPosV - nEdge->_pos.back() ).SquareModulus() )
+ edges.insert( nEdge );
+ }
}
- pPrev = p;
}
- edgeDir.push_back ( edgeDir[0] );
- edgeSize.push_back( edgeSize[0] );
- pN /= points.size();
+ while ( nbE < edges.size() );
- gp_XYZ newPos(0,0,0);
- //gp_XYZ pN = SMESH_TNodeXYZ( _nodes.back() );
- double sumSize = 0;
- for ( size_t i = 0; i < points.size(); ++i )
+ // move the target node of the got edges
+
+ gp_XYZ prevPosV = PrevPos();
+ if ( eov->SWOLType() == TopAbs_EDGE )
{
- gp_Vec toN( pN - points[i]);
- double toNLen = toN.Magnitude();
- if ( toNLen < numeric_limits<double>::min() )
- {
- newPos += pN;
- continue;
- }
- gp_Vec bisec = edgeDir[i] + edgeDir[i+1];
- double bisecLen = bisec.SquareMagnitude();
- if ( bisecLen < numeric_limits<double>::min() )
- {
- gp_Vec norm = edgeDir[i] ^ toN;
- bisec = norm ^ edgeDir[i];
- bisecLen = bisec.SquareMagnitude();
- }
- bisecLen = Sqrt( bisecLen );
- bisec /= bisecLen;
+ BRepAdaptor_Curve curve ( TopoDS::Edge( eov->_sWOL ));
+ prevPosV = curve.Value( prevPosV.X() ).XYZ();
+ }
+ else if ( eov->SWOLType() == TopAbs_FACE )
+ {
+ BRepAdaptor_Surface surface( TopoDS::Face( eov->_sWOL ));
+ prevPosV = surface.Value( prevPosV.X(), prevPosV.Y() ).XYZ();
+ }
-#if 1
- //bisecLen = 1.;
- gp_XYZ pNew = ( points[i] + bisec.XYZ() * toNLen ) * bisecLen;
- sumSize += bisecLen;
-#else
- gp_XYZ pNew = ( points[i] + bisec.XYZ() * toNLen ) * ( edgeSize[i] + edgeSize[i+1] );
- sumSize += ( edgeSize[i] + edgeSize[i+1] );
-#endif
- newPos += pNew;
+ SMDS_FacePositionPtr fPos;
+ //double r = 1. - Min( 0.9, step / 10. );
+ for ( set< _LayerEdge* >::iterator e = edges.begin(); e != edges.end(); ++e )
+ {
+ _LayerEdge* edgeF = *e;
+ const gp_XYZ prevVF = edgeF->PrevPos() - prevPosV;
+ const gp_XYZ newPosF = curPosV + prevVF;
+ SMDS_MeshNode* tgtNodeF = const_cast<SMDS_MeshNode*>( edgeF->_nodes.back() );
+ tgtNodeF->setXYZ( newPosF.X(), newPosF.Y(), newPosF.Z() );
+ edgeF->_pos.back() = newPosF;
+ dumpMoveComm( tgtNodeF, "MoveNearConcaVer" ); // debug
+
+ // set _curvature to make edgeF updated by putOnOffsetSurface()
+ if ( !edgeF->_curvature )
+ if (( fPos = edgeF->_nodes[0]->GetPosition() ))
+ {
+ edgeF->_curvature = _Factory::NewCurvature();
+ edgeF->_curvature->_r = 0;
+ edgeF->_curvature->_k = 0;
+ edgeF->_curvature->_h2lenRatio = 0;
+ edgeF->_curvature->_uv.SetCoord( fPos->GetUParameter(), fPos->GetVParameter() );
+ }
}
- newPos /= sumSize;
+ // gp_XYZ inflationVec( SMESH_TNodeXYZ( _nodes.back() ) -
+ // SMESH_TNodeXYZ( _nodes[0] ));
+ // for ( set< _LayerEdge* >::iterator e = edges.begin(); e != edges.end(); ++e )
+ // {
+ // _LayerEdge* edgeF = *e;
+ // gp_XYZ newPos = SMESH_TNodeXYZ( edgeF->_nodes[0] ) + inflationVec;
+ // SMDS_MeshNode* tgtNode = const_cast<SMDS_MeshNode*>( edgeF->_nodes.back() );
+ // tgtNode->setXYZ( newPos.X(), newPos.Y(), newPos.Z() );
+ // edgeF->_pos.back() = newPosF;
+ // dumpMoveComm( tgtNode, "MoveNearConcaVer" ); // debug
+ // }
- return newPos;
+ // smooth _LayerEdge's around moved nodes
+ //size_t nbBadBefore = badSmooEdges.size();
+ for ( set< _LayerEdge* >::iterator e = edges.begin(); e != edges.end(); ++e )
+ {
+ _LayerEdge* edgeF = *e;
+ for ( size_t j = 0; j < edgeF->_neibors.size(); ++j )
+ if ( edgeF->_neibors[j]->_nodes[0]->getshapeId() == eos->_shapeID )
+ //&& !edges.count( edgeF->_neibors[j] ))
+ {
+ _LayerEdge* edgeFN = edgeF->_neibors[j];
+ edgeFN->Unset( SMOOTHED );
+ int nbBad = edgeFN->Smooth( step, /*isConcaFace=*/true, /*findBest=*/true );
+ // if ( nbBad > 0 )
+ // {
+ // gp_XYZ newPos = SMESH_TNodeXYZ( edgeFN->_nodes[0] ) + inflationVec;
+ // const gp_XYZ& prevPos = edgeFN->_pos[ edgeFN->_pos.size()-2 ];
+ // int nbBadAfter = edgeFN->_simplices.size();
+ // double vol;
+ // for ( size_t iS = 0; iS < edgeFN->_simplices.size(); ++iS )
+ // {
+ // nbBadAfter -= edgeFN->_simplices[iS].IsForward( &prevPos, &newPos, vol );
+ // }
+ // if ( nbBadAfter <= nbBad )
+ // {
+ // SMDS_MeshNode* tgtNode = const_cast<SMDS_MeshNode*>( edgeFN->_nodes.back() );
+ // tgtNode->setXYZ( newPos.X(), newPos.Y(), newPos.Z() );
+ // edgeF->_pos.back() = newPosF;
+ // dumpMoveComm( tgtNode, "MoveNearConcaVer 2" ); // debug
+ // nbBad = nbBadAfter;
+ // }
+ // }
+ if ( nbBad > 0 )
+ badSmooEdges.push_back( edgeFN );
+ }
+ }
+ // move a bit not smoothed around moved nodes
+ // for ( size_t i = nbBadBefore; i < badSmooEdges.size(); ++i )
+ // {
+ // _LayerEdge* edgeF = badSmooEdges[i];
+ // SMDS_MeshNode* tgtNode = const_cast<SMDS_MeshNode*>( edgeF->_nodes.back() );
+ // gp_XYZ newPos1 = SMESH_TNodeXYZ( edgeF->_nodes[0] ) + inflationVec;
+ // gp_XYZ newPos2 = 0.5 * ( newPos1 + SMESH_TNodeXYZ( tgtNode ));
+ // tgtNode->setXYZ( newPos2.X(), newPos2.Y(), newPos2.Z() );
+ // edgeF->_pos.back() = newPosF;
+ // dumpMoveComm( tgtNode, "MoveNearConcaVer 2" ); // debug
+ // }
}
//================================================================================
/*!
- * \brief Computes a new node position using weigthed node positions
+ * \brief Perform smooth of _LayerEdge's based on EDGE's
+ * \retval bool - true if node has been moved
*/
//================================================================================
-gp_XYZ _LayerEdge::smoothLengthWeighted()
+bool _LayerEdge::SmoothOnEdge(Handle(ShapeAnalysis_Surface)& surface,
+ const TopoDS_Face& F,
+ SMESH_MesherHelper& helper)
{
- vector< double > edgeSize; edgeSize.reserve( _simplices.size() + 1);
- vector< gp_XYZ > points; points. reserve( _simplices.size() );
+ ASSERT( IsOnEdge() );
- gp_XYZ pPrev = SMESH_TNodeXYZ( _simplices.back()._nPrev );
- for ( size_t i = 0; i < _simplices.size(); ++i )
+ SMDS_MeshNode* tgtNode = const_cast<SMDS_MeshNode*>( _nodes.back() );
+ SMESH_TNodeXYZ oldPos( tgtNode );
+ double dist01, distNewOld;
+
+ SMESH_TNodeXYZ p0( _2neibors->tgtNode(0));
+ SMESH_TNodeXYZ p1( _2neibors->tgtNode(1));
+ dist01 = p0.Distance( _2neibors->tgtNode(1) );
+
+ gp_Pnt newPos = p0 * _2neibors->_wgt[0] + p1 * _2neibors->_wgt[1];
+ double lenDelta = 0;
+ if ( _curvature )
{
- gp_XYZ p = SMESH_TNodeXYZ( _simplices[i]._nPrev );
- edgeSize.push_back( ( p - pPrev ).Modulus() );
- if ( edgeSize.back() < numeric_limits<double>::min() )
- {
- edgeSize.pop_back();
- }
- else
+ //lenDelta = _curvature->lenDelta( _len );
+ lenDelta = _curvature->lenDeltaByDist( dist01 );
+ newPos.ChangeCoord() += _normal * lenDelta;
+ }
+
+ distNewOld = newPos.Distance( oldPos );
+
+ if ( F.IsNull() )
+ {
+ if ( _2neibors->_plnNorm )
{
- points.push_back( p );
+ // put newPos on the plane defined by source node and _plnNorm
+ gp_XYZ new2src = SMESH_TNodeXYZ( _nodes[0] ) - newPos.XYZ();
+ double new2srcProj = (*_2neibors->_plnNorm) * new2src;
+ newPos.ChangeCoord() += (*_2neibors->_plnNorm) * new2srcProj;
}
- pPrev = p;
+ tgtNode->setXYZ( newPos.X(), newPos.Y(), newPos.Z() );
+ _pos.back() = newPos.XYZ();
}
- edgeSize.push_back( edgeSize[0] );
-
- gp_XYZ newPos(0,0,0);
- double sumSize = 0;
- for ( size_t i = 0; i < points.size(); ++i )
+ else
{
- newPos += points[i] * ( edgeSize[i] + edgeSize[i+1] );
- sumSize += edgeSize[i] + edgeSize[i+1];
+ tgtNode->setXYZ( newPos.X(), newPos.Y(), newPos.Z() );
+ gp_XY uv( Precision::Infinite(), 0 );
+ helper.CheckNodeUV( F, tgtNode, uv, 1e-10, /*force=*/true );
+ _pos.back().SetCoord( uv.X(), uv.Y(), 0 );
+
+ newPos = surface->Value( uv );
+ tgtNode->setXYZ( newPos.X(), newPos.Y(), newPos.Z() );
}
- newPos /= sumSize;
- return newPos;
+
+ // commented for IPAL0052478
+ // if ( _curvature && lenDelta < 0 )
+ // {
+ // gp_Pnt prevPos( _pos[ _pos.size()-2 ]);
+ // _len -= prevPos.Distance( oldPos );
+ // _len += prevPos.Distance( newPos );
+ // }
+ bool moved = distNewOld > dist01/50;
+ //if ( moved )
+ dumpMove( tgtNode ); // debug
+
+ return moved;
}
//================================================================================
/*!
- * \brief Computes a new node position using angular-based smoothing
+ * \brief Perform 3D smooth of nodes inflated from FACE. No check of validity
*/
//================================================================================
-gp_XYZ _LayerEdge::smoothCentroidal()
+void _LayerEdge::SmoothWoCheck()
{
- gp_XYZ newPos(0,0,0);
- gp_XYZ pN = SMESH_TNodeXYZ( _nodes.back() );
- double sumSize = 0;
- for ( size_t i = 0; i < _simplices.size(); ++i )
- {
- gp_XYZ p1 = SMESH_TNodeXYZ( _simplices[i]._nPrev );
- gp_XYZ p2 = SMESH_TNodeXYZ( _simplices[i]._nNext );
- gp_XYZ gc = ( pN + p1 + p2 ) / 3.;
- double size = (( p1 - pN ) ^ ( p2 - pN )).Modulus();
+ if ( Is( DIFFICULT ))
+ return;
- sumSize += size;
- newPos += gc * size;
- }
- newPos /= sumSize;
+ bool moved = Is( SMOOTHED );
+ for ( size_t i = 0; i < _neibors.size() && !moved; ++i )
+ moved = _neibors[i]->Is( SMOOTHED );
+ if ( !moved )
+ return;
- return newPos;
+ gp_XYZ newPos = (this->*_smooFunction)(); // fun chosen by ChooseSmooFunction()
+
+ SMDS_MeshNode* n = const_cast< SMDS_MeshNode* >( _nodes.back() );
+ n->setXYZ( newPos.X(), newPos.Y(), newPos.Z());
+ _pos.back() = newPos;
+
+ dumpMoveComm( n, SMESH_Comment("No check - ") << _funNames[ smooFunID() ]);
}
//================================================================================
/*!
- * \brief Computes a new node position located inside a Nef polygon
+ * \brief Checks validity of _neibors on EDGEs and VERTEXes
*/
//================================================================================
-gp_XYZ _LayerEdge::smoothNefPolygon()
+int _LayerEdge::CheckNeiborsOnBoundary( vector< _LayerEdge* >* badNeibors, bool * needSmooth )
{
- gp_XYZ newPos(0,0,0);
-
- // get a plane to seach a solution on
+ if ( ! Is( NEAR_BOUNDARY ))
+ return 0;
- vector< gp_XYZ > vecs( _simplices.size() + 1 );
- size_t i;
- const double tol = numeric_limits<double>::min();
- gp_XYZ center(0,0,0);
- for ( i = 0; i < _simplices.size(); ++i )
+ int nbBad = 0;
+ double vol;
+ for ( size_t iN = 0; iN < _neibors.size(); ++iN )
{
- vecs[i] = ( SMESH_TNodeXYZ( _simplices[i]._nNext ) -
- SMESH_TNodeXYZ( _simplices[i]._nPrev ));
- center += SMESH_TNodeXYZ( _simplices[i]._nPrev );
+ _LayerEdge* eN = _neibors[iN];
+ if ( eN->_nodes[0]->getshapeId() == _nodes[0]->getshapeId() )
+ continue;
+ if ( needSmooth )
+ *needSmooth |= ( eN->Is( _LayerEdge::BLOCKED ) ||
+ eN->Is( _LayerEdge::NORMAL_UPDATED ) ||
+ eN->_pos.size() != _pos.size() );
+
+ SMESH_TNodeXYZ curPosN ( eN->_nodes.back() );
+ SMESH_TNodeXYZ prevPosN( eN->_nodes[0] );
+ for ( size_t i = 0; i < eN->_simplices.size(); ++i )
+ if ( eN->_nodes.size() > 1 &&
+ eN->_simplices[i].Includes( _nodes.back() ) &&
+ !eN->_simplices[i].IsForward( &prevPosN, &curPosN, vol ))
+ {
+ ++nbBad;
+ if ( badNeibors )
+ {
+ badNeibors->push_back( eN );
+ debugMsg("Bad boundary simplex ( "
+ << " "<< eN->_nodes[0]->GetID()
+ << " "<< eN->_nodes.back()->GetID()
+ << " "<< eN->_simplices[i]._nPrev->GetID()
+ << " "<< eN->_simplices[i]._nNext->GetID() << " )" );
+ }
+ else
+ {
+ break;
+ }
+ }
}
- vecs.back() = vecs[0];
- center /= _simplices.size();
+ return nbBad;
+}
- gp_XYZ zAxis(0,0,0);
- for ( i = 0; i < _simplices.size(); ++i )
- zAxis += vecs[i] ^ vecs[i+1];
+//================================================================================
+/*!
+ * \brief Perform 'smart' 3D smooth of nodes inflated from FACE
+ * \retval int - nb of bad simplices around this _LayerEdge
+ */
+//================================================================================
- gp_XYZ yAxis;
- for ( i = 0; i < _simplices.size(); ++i )
+int _LayerEdge::Smooth(const int step, bool findBest, vector< _LayerEdge* >& toSmooth )
+{
+ if ( !Is( MOVED ) || Is( SMOOTHED ) || Is( BLOCKED ))
+ return 0; // shape of simplices not changed
+ if ( _simplices.size() < 2 )
+ return 0; // _LayerEdge inflated along EDGE or FACE
+
+ if ( Is( DIFFICULT )) // || Is( ON_CONCAVE_FACE )
+ findBest = true;
+
+ const gp_XYZ& curPos = _pos.back();
+ const gp_XYZ& prevPos = _pos[0]; //PrevPos();
+
+ // quality metrics (orientation) of tetras around _tgtNode
+ int nbOkBefore = 0;
+ double vol, minVolBefore = 1e100;
+ for ( size_t i = 0; i < _simplices.size(); ++i )
{
- yAxis = vecs[i];
- if ( yAxis.SquareModulus() > tol )
+ nbOkBefore += _simplices[i].IsForward( &prevPos, &curPos, vol );
+ minVolBefore = Min( minVolBefore, vol );
+ }
+ int nbBad = _simplices.size() - nbOkBefore;
+
+ bool bndNeedSmooth = false;
+ if ( nbBad == 0 )
+ nbBad = CheckNeiborsOnBoundary( 0, & bndNeedSmooth );
+ if ( nbBad > 0 )
+ Set( DISTORTED );
+
+ // evaluate min angle
+ if ( nbBad == 0 && !findBest && !bndNeedSmooth )
+ {
+ size_t nbGoodAngles = _simplices.size();
+ double angle;
+ for ( size_t i = 0; i < _simplices.size(); ++i )
+ {
+ if ( !_simplices[i].IsMinAngleOK( curPos, angle ) && angle > _minAngle )
+ --nbGoodAngles;
+ }
+ if ( nbGoodAngles == _simplices.size() )
+ {
+ Unset( MOVED );
+ return 0;
+ }
+ }
+ if ( Is( ON_CONCAVE_FACE ))
+ findBest = true;
+
+ if ( step % 2 == 0 )
+ findBest = false;
+
+ if ( Is( ON_CONCAVE_FACE ) && !findBest ) // alternate FUN_CENTROIDAL and FUN_LAPLACIAN
+ {
+ if ( _smooFunction == _funs[ FUN_LAPLACIAN ] )
+ _smooFunction = _funs[ FUN_CENTROIDAL ];
+ else
+ _smooFunction = _funs[ FUN_LAPLACIAN ];
+ }
+
+ // compute new position for the last _pos using different _funs
+ gp_XYZ newPos;
+ bool moved = false;
+ for ( int iFun = -1; iFun < theNbSmooFuns; ++iFun )
+ {
+ if ( iFun < 0 )
+ newPos = (this->*_smooFunction)(); // fun chosen by ChooseSmooFunction()
+ else if ( _funs[ iFun ] == _smooFunction )
+ continue; // _smooFunction again
+ else if ( step > 1 )
+ newPos = (this->*_funs[ iFun ])(); // try other smoothing fun
+ else
+ break; // let "easy" functions improve elements around distorted ones
+
+ if ( _curvature )
+ {
+ double delta = _curvature->lenDelta( _len );
+ if ( delta > 0 )
+ newPos += _normal * delta;
+ else
+ {
+ double segLen = _normal * ( newPos - prevPos );
+ if ( segLen + delta > 0 )
+ newPos += _normal * delta;
+ }
+ // double segLenChange = _normal * ( curPos - newPos );
+ // newPos += 0.5 * _normal * segLenChange;
+ }
+
+ int nbOkAfter = 0;
+ double minVolAfter = 1e100;
+ for ( size_t i = 0; i < _simplices.size(); ++i )
+ {
+ nbOkAfter += _simplices[i].IsForward( &prevPos, &newPos, vol );
+ minVolAfter = Min( minVolAfter, vol );
+ }
+ // get worse?
+ if ( nbOkAfter < nbOkBefore )
+ continue;
+
+ if (( findBest ) &&
+ ( nbOkAfter == nbOkBefore ) &&
+ ( minVolAfter <= minVolBefore ))
+ continue;
+
+ nbBad = _simplices.size() - nbOkAfter;
+ minVolBefore = minVolAfter;
+ nbOkBefore = nbOkAfter;
+ moved = true;
+
+ SMDS_MeshNode* n = const_cast< SMDS_MeshNode* >( _nodes.back() );
+ n->setXYZ( newPos.X(), newPos.Y(), newPos.Z());
+ _pos.back() = newPos;
+
+ dumpMoveComm( n, SMESH_Comment( _funNames[ iFun < 0 ? smooFunID() : iFun ] )
+ << (nbBad ? " --BAD" : ""));
+
+ if ( iFun > -1 )
+ {
+ continue; // look for a better function
+ }
+
+ if ( !findBest )
+ break;
+
+ } // loop on smoothing functions
+
+ if ( moved ) // notify _neibors
+ {
+ Set( SMOOTHED );
+ for ( size_t i = 0; i < _neibors.size(); ++i )
+ if ( !_neibors[i]->Is( MOVED ))
+ {
+ _neibors[i]->Set( MOVED );
+ toSmooth.push_back( _neibors[i] );
+ }
+ }
+
+ return nbBad;
+}
+
+//================================================================================
+/*!
+ * \brief Perform 'smart' 3D smooth of nodes inflated from FACE
+ * \retval int - nb of bad simplices around this _LayerEdge
+ */
+//================================================================================
+
+int _LayerEdge::Smooth(const int step, const bool isConcaveFace, bool findBest )
+{
+ if ( !_smooFunction )
+ return 0; // _LayerEdge inflated along EDGE or FACE
+ if ( Is( BLOCKED ))
+ return 0; // not inflated
+
+ const gp_XYZ& curPos = _pos.back();
+ const gp_XYZ& prevPos = _pos[0]; //PrevCheckPos();
+
+ // quality metrics (orientation) of tetras around _tgtNode
+ int nbOkBefore = 0;
+ double vol, minVolBefore = 1e100;
+ for ( size_t i = 0; i < _simplices.size(); ++i )
+ {
+ nbOkBefore += _simplices[i].IsForward( &prevPos, &curPos, vol );
+ minVolBefore = Min( minVolBefore, vol );
+ }
+ int nbBad = _simplices.size() - nbOkBefore;
+
+ if ( isConcaveFace ) // alternate FUN_CENTROIDAL and FUN_LAPLACIAN
+ {
+ if ( _smooFunction == _funs[ FUN_CENTROIDAL ] && step % 2 )
+ _smooFunction = _funs[ FUN_LAPLACIAN ];
+ else if ( _smooFunction == _funs[ FUN_LAPLACIAN ] && !( step % 2 ))
+ _smooFunction = _funs[ FUN_CENTROIDAL ];
+ }
+
+ // compute new position for the last _pos using different _funs
+ gp_XYZ newPos;
+ for ( int iFun = -1; iFun < theNbSmooFuns; ++iFun )
+ {
+ if ( iFun < 0 )
+ newPos = (this->*_smooFunction)(); // fun chosen by ChooseSmooFunction()
+ else if ( _funs[ iFun ] == _smooFunction )
+ continue; // _smooFunction again
+ else if ( step > 1 )
+ newPos = (this->*_funs[ iFun ])(); // try other smoothing fun
+ else
+ break; // let "easy" functions improve elements around distorted ones
+
+ if ( _curvature )
+ {
+ double delta = _curvature->lenDelta( _len );
+ if ( delta > 0 )
+ newPos += _normal * delta;
+ else
+ {
+ double segLen = _normal * ( newPos - prevPos );
+ if ( segLen + delta > 0 )
+ newPos += _normal * delta;
+ }
+ // double segLenChange = _normal * ( curPos - newPos );
+ // newPos += 0.5 * _normal * segLenChange;
+ }
+
+ int nbOkAfter = 0;
+ double minVolAfter = 1e100;
+ for ( size_t i = 0; i < _simplices.size(); ++i )
+ {
+ nbOkAfter += _simplices[i].IsForward( &prevPos, &newPos, vol );
+ minVolAfter = Min( minVolAfter, vol );
+ }
+ // get worse?
+ if ( nbOkAfter < nbOkBefore )
+ continue;
+ if (( isConcaveFace || findBest ) &&
+ ( nbOkAfter == nbOkBefore ) &&
+ ( minVolAfter <= minVolBefore )
+ )
+ continue;
+
+ nbBad = _simplices.size() - nbOkAfter;
+ minVolBefore = minVolAfter;
+ nbOkBefore = nbOkAfter;
+
+ SMDS_MeshNode* n = const_cast< SMDS_MeshNode* >( _nodes.back() );
+ n->setXYZ( newPos.X(), newPos.Y(), newPos.Z());
+ _pos.back() = newPos;
+
+ dumpMoveComm( n, SMESH_Comment( _funNames[ iFun < 0 ? smooFunID() : iFun ] )
+ << ( nbBad ? "--BAD" : ""));
+
+ // commented for IPAL0052478
+ // _len -= prevPos.Distance(SMESH_TNodeXYZ( n ));
+ // _len += prevPos.Distance(newPos);
+
+ if ( iFun > -1 ) // findBest || the chosen _fun makes worse
+ {
+ //_smooFunction = _funs[ iFun ];
+ // cout << "# " << _funNames[ iFun ] << "\t N:" << _nodes.back()->GetID()
+ // << "\t nbBad: " << _simplices.size() - nbOkAfter
+ // << " minVol: " << minVolAfter
+ // << " " << newPos.X() << " " << newPos.Y() << " " << newPos.Z()
+ // << endl;
+ continue; // look for a better function
+ }
+
+ if ( !findBest )
break;
+
+ } // loop on smoothing functions
+
+ return nbBad;
+}
+
+//================================================================================
+/*!
+ * \brief Chooses a smoothing technique giving a position most close to an initial one.
+ * For a correct result, _simplices must contain nodes lying on geometry.
+ */
+//================================================================================
+
+void _LayerEdge::ChooseSmooFunction( const set< TGeomID >& concaveVertices,
+ const TNode2Edge& /*n2eMap*/)
+{
+ if ( _smooFunction ) return;
+
+ // use smoothNefPolygon() near concaveVertices
+ if ( !concaveVertices.empty() )
+ {
+ _smooFunction = _funs[ FUN_CENTROIDAL ];
+
+ Set( ON_CONCAVE_FACE );
+
+ for ( size_t i = 0; i < _simplices.size(); ++i )
+ {
+ if ( concaveVertices.count( _simplices[i]._nPrev->getshapeId() ))
+ {
+ _smooFunction = _funs[ FUN_NEFPOLY ];
+
+ // set FUN_CENTROIDAL to neighbor edges
+ for ( i = 0; i < _neibors.size(); ++i )
+ {
+ if ( _neibors[i]->_nodes[0]->GetPosition()->GetDim() == 2 )
+ {
+ _neibors[i]->_smooFunction = _funs[ FUN_CENTROIDAL ];
+ }
+ }
+ return;
+ }
+ }
+
+ // // this choice is done only if ( !concaveVertices.empty() ) for Grids/smesh/bugs_19/X1
+ // // where the nodes are smoothed too far along a sphere thus creating
+ // // inverted _simplices
+ // double dist[theNbSmooFuns];
+ // //double coef[theNbSmooFuns] = { 1., 1.2, 1.4, 1.4 };
+ // double coef[theNbSmooFuns] = { 1., 1., 1., 1. };
+
+ // double minDist = Precision::Infinite();
+ // gp_Pnt p = SMESH_TNodeXYZ( _nodes[0] );
+ // for ( int i = 0; i < FUN_NEFPOLY; ++i )
+ // {
+ // gp_Pnt newP = (this->*_funs[i])();
+ // dist[i] = p.SquareDistance( newP );
+ // if ( dist[i]*coef[i] < minDist )
+ // {
+ // _smooFunction = _funs[i];
+ // minDist = dist[i]*coef[i];
+ // }
+ // }
+ }
+ else
+ {
+ _smooFunction = _funs[ FUN_LAPLACIAN ];
+ }
+ // int minDim = 3;
+ // for ( size_t i = 0; i < _simplices.size(); ++i )
+ // minDim = Min( minDim, _simplices[i]._nPrev->GetPosition()->GetDim() );
+ // if ( minDim == 0 )
+ // _smooFunction = _funs[ FUN_CENTROIDAL ];
+ // else if ( minDim == 1 )
+ // _smooFunction = _funs[ FUN_CENTROIDAL ];
+
+
+ // int iMin;
+ // for ( int i = 0; i < FUN_NB; ++i )
+ // {
+ // //cout << dist[i] << " ";
+ // if ( _smooFunction == _funs[i] ) {
+ // iMin = i;
+ // //debugMsg( fNames[i] );
+ // break;
+ // }
+ // }
+ // cout << _funNames[ iMin ] << "\t N:" << _nodes.back()->GetID() << endl;
+}
+
+//================================================================================
+/*!
+ * \brief Returns a name of _SmooFunction
+ */
+//================================================================================
+
+int _LayerEdge::smooFunID( _LayerEdge::PSmooFun fun) const
+{
+ if ( !fun )
+ fun = _smooFunction;
+ for ( int i = 0; i < theNbSmooFuns; ++i )
+ if ( fun == _funs[i] )
+ return i;
+
+ return theNbSmooFuns;
+}
+
+//================================================================================
+/*!
+ * \brief Computes a new node position using Laplacian smoothing
+ */
+//================================================================================
+
+gp_XYZ _LayerEdge::smoothLaplacian()
+{
+ gp_XYZ newPos (0,0,0);
+ for ( size_t i = 0; i < _simplices.size(); ++i )
+ newPos += SMESH_TNodeXYZ( _simplices[i]._nPrev );
+ newPos /= _simplices.size();
+
+ return newPos;
+}
+
+//================================================================================
+/*!
+ * \brief Computes a new node position using angular-based smoothing
+ */
+//================================================================================
+
+gp_XYZ _LayerEdge::smoothAngular()
+{
+ vector< gp_Vec > edgeDir; edgeDir. reserve( _simplices.size() + 1 );
+ vector< double > edgeSize; edgeSize.reserve( _simplices.size() );
+ vector< gp_XYZ > points; points. reserve( _simplices.size() + 1 );
+
+ gp_XYZ pPrev = SMESH_TNodeXYZ( _simplices.back()._nPrev );
+ gp_XYZ pN( 0,0,0 );
+ for ( size_t i = 0; i < _simplices.size(); ++i )
+ {
+ gp_XYZ p = SMESH_TNodeXYZ( _simplices[i]._nPrev );
+ edgeDir.push_back( p - pPrev );
+ edgeSize.push_back( edgeDir.back().Magnitude() );
+ if ( edgeSize.back() < numeric_limits<double>::min() )
+ {
+ edgeDir.pop_back();
+ edgeSize.pop_back();
+ }
+ else
+ {
+ edgeDir.back() /= edgeSize.back();
+ points.push_back( p );
+ pN += p;
+ }
+ pPrev = p;
+ }
+ edgeDir.push_back ( edgeDir[0] );
+ edgeSize.push_back( edgeSize[0] );
+ pN /= points.size();
+
+ gp_XYZ newPos(0,0,0);
+ double sumSize = 0;
+ for ( size_t i = 0; i < points.size(); ++i )
+ {
+ gp_Vec toN = pN - points[i];
+ double toNLen = toN.Magnitude();
+ if ( toNLen < numeric_limits<double>::min() )
+ {
+ newPos += pN;
+ continue;
+ }
+ gp_Vec bisec = edgeDir[i] + edgeDir[i+1];
+ double bisecLen = bisec.SquareMagnitude();
+ if ( bisecLen < numeric_limits<double>::min() )
+ {
+ gp_Vec norm = edgeDir[i] ^ toN;
+ bisec = norm ^ edgeDir[i];
+ bisecLen = bisec.SquareMagnitude();
+ }
+ bisecLen = Sqrt( bisecLen );
+ bisec /= bisecLen;
+
+#if 1
+ gp_XYZ pNew = ( points[i] + bisec.XYZ() * toNLen ) * bisecLen;
+ sumSize += bisecLen;
+#else
+ gp_XYZ pNew = ( points[i] + bisec.XYZ() * toNLen ) * ( edgeSize[i] + edgeSize[i+1] );
+ sumSize += ( edgeSize[i] + edgeSize[i+1] );
+#endif
+ newPos += pNew;
+ }
+ newPos /= sumSize;
+
+ // project newPos to an average plane
+
+ gp_XYZ norm(0,0,0); // plane normal
+ points.push_back( points[0] );
+ for ( size_t i = 1; i < points.size(); ++i )
+ {
+ gp_XYZ vec1 = points[ i-1 ] - pN;
+ gp_XYZ vec2 = points[ i ] - pN;
+ gp_XYZ cross = vec1 ^ vec2;
+ try {
+ cross.Normalize();
+ if ( cross * norm < numeric_limits<double>::min() )
+ norm += cross.Reversed();
+ else
+ norm += cross;
+ }
+ catch (Standard_Failure&) { // if |cross| == 0.
+ }
+ }
+ gp_XYZ vec = newPos - pN;
+ double r = ( norm * vec ) / norm.SquareModulus(); // param [0,1] on norm
+ newPos = newPos - r * norm;
+
+ return newPos;
+}
+
+//================================================================================
+/*!
+ * \brief Computes a new node position using weighted node positions
+ */
+//================================================================================
+
+gp_XYZ _LayerEdge::smoothLengthWeighted()
+{
+ vector< double > edgeSize; edgeSize.reserve( _simplices.size() + 1);
+ vector< gp_XYZ > points; points. reserve( _simplices.size() );
+
+ gp_XYZ pPrev = SMESH_TNodeXYZ( _simplices.back()._nPrev );
+ for ( size_t i = 0; i < _simplices.size(); ++i )
+ {
+ gp_XYZ p = SMESH_TNodeXYZ( _simplices[i]._nPrev );
+ edgeSize.push_back( ( p - pPrev ).Modulus() );
+ if ( edgeSize.back() < numeric_limits<double>::min() )
+ {
+ edgeSize.pop_back();
+ }
+ else
+ {
+ points.push_back( p );
+ }
+ pPrev = p;
+ }
+ edgeSize.push_back( edgeSize[0] );
+
+ gp_XYZ newPos(0,0,0);
+ double sumSize = 0;
+ for ( size_t i = 0; i < points.size(); ++i )
+ {
+ newPos += points[i] * ( edgeSize[i] + edgeSize[i+1] );
+ sumSize += edgeSize[i] + edgeSize[i+1];
+ }
+ newPos /= sumSize;
+ return newPos;
+}
+
+//================================================================================
+/*!
+ * \brief Computes a new node position using angular-based smoothing
+ */
+//================================================================================
+
+gp_XYZ _LayerEdge::smoothCentroidal()
+{
+ gp_XYZ newPos(0,0,0);
+ gp_XYZ pN = SMESH_TNodeXYZ( _nodes.back() );
+ double sumSize = 0;
+ for ( size_t i = 0; i < _simplices.size(); ++i )
+ {
+ gp_XYZ p1 = SMESH_TNodeXYZ( _simplices[i]._nPrev );
+ gp_XYZ p2 = SMESH_TNodeXYZ( _simplices[i]._nNext );
+ gp_XYZ gc = ( pN + p1 + p2 ) / 3.;
+ double size = (( p1 - pN ) ^ ( p2 - pN )).Modulus();
+
+ sumSize += size;
+ newPos += gc * size;
+ }
+ newPos /= sumSize;
+
+ return newPos;
+}
+
+//================================================================================
+/*!
+ * \brief Computes a new node position located inside a Nef polygon
+ */
+//================================================================================
+
+gp_XYZ _LayerEdge::smoothNefPolygon()
+#ifdef OLD_NEF_POLYGON
+{
+ gp_XYZ newPos(0,0,0);
+
+ // get a plane to search a solution on
+
+ vector< gp_XYZ > vecs( _simplices.size() + 1 );
+ size_t i;
+ const double tol = numeric_limits<double>::min();
+ gp_XYZ center(0,0,0);
+ for ( i = 0; i < _simplices.size(); ++i )
+ {
+ vecs[i] = ( SMESH_TNodeXYZ( _simplices[i]._nNext ) -
+ SMESH_TNodeXYZ( _simplices[i]._nPrev ));
+ center += SMESH_TNodeXYZ( _simplices[i]._nPrev );
+ }
+ vecs.back() = vecs[0];
+ center /= _simplices.size();
+
+ gp_XYZ zAxis(0,0,0);
+ for ( i = 0; i < _simplices.size(); ++i )
+ zAxis += vecs[i] ^ vecs[i+1];
+
+ gp_XYZ yAxis;
+ for ( i = 0; i < _simplices.size(); ++i )
+ {
+ yAxis = vecs[i];
+ if ( yAxis.SquareModulus() > tol )
+ break;
+ }
+ gp_XYZ xAxis = yAxis ^ zAxis;
+ // SMESH_TNodeXYZ p0( _simplices[0]._nPrev );
+ // const double tol = 1e-6 * ( p0.Distance( _simplices[1]._nPrev ) +
+ // p0.Distance( _simplices[2]._nPrev ));
+ // gp_XYZ center = smoothLaplacian();
+ // gp_XYZ xAxis, yAxis, zAxis;
+ // for ( i = 0; i < _simplices.size(); ++i )
+ // {
+ // xAxis = SMESH_TNodeXYZ( _simplices[i]._nPrev ) - center;
+ // if ( xAxis.SquareModulus() > tol*tol )
+ // break;
+ // }
+ // for ( i = 1; i < _simplices.size(); ++i )
+ // {
+ // yAxis = SMESH_TNodeXYZ( _simplices[i]._nPrev ) - center;
+ // zAxis = xAxis ^ yAxis;
+ // if ( zAxis.SquareModulus() > tol*tol )
+ // break;
+ // }
+ // if ( i == _simplices.size() ) return newPos;
+
+ yAxis = zAxis ^ xAxis;
+ xAxis /= xAxis.Modulus();
+ yAxis /= yAxis.Modulus();
+
+ // get half-planes of _simplices
+
+ vector< _halfPlane > halfPlns( _simplices.size() );
+ int nbHP = 0;
+ for ( size_t i = 0; i < _simplices.size(); ++i )
+ {
+ gp_XYZ OP1 = SMESH_TNodeXYZ( _simplices[i]._nPrev ) - center;
+ gp_XYZ OP2 = SMESH_TNodeXYZ( _simplices[i]._nNext ) - center;
+ gp_XY p1( OP1 * xAxis, OP1 * yAxis );
+ gp_XY p2( OP2 * xAxis, OP2 * yAxis );
+ gp_XY vec12 = p2 - p1;
+ double dist12 = vec12.Modulus();
+ if ( dist12 < tol )
+ continue;
+ vec12 /= dist12;
+ halfPlns[ nbHP ]._pos = p1;
+ halfPlns[ nbHP ]._dir = vec12;
+ halfPlns[ nbHP ]._inNorm.SetCoord( -vec12.Y(), vec12.X() );
+ ++nbHP;
+ }
+
+ // intersect boundaries of half-planes, define state of intersection points
+ // in relation to all half-planes and calculate internal point of a 2D polygon
+
+ double sumLen = 0;
+ gp_XY newPos2D (0,0);
+
+ enum { UNDEF = -1, NOT_OUT, IS_OUT, NO_INT };
+ typedef std::pair< gp_XY, int > TIntPntState; // coord and isOut state
+ TIntPntState undefIPS( gp_XY(1e100,1e100), UNDEF );
+
+ vector< vector< TIntPntState > > allIntPnts( nbHP );
+ for ( int iHP1 = 0; iHP1 < nbHP; ++iHP1 )
+ {
+ vector< TIntPntState > & intPnts1 = allIntPnts[ iHP1 ];
+ if ( intPnts1.empty() ) intPnts1.resize( nbHP, undefIPS );
+
+ int iPrev = SMESH_MesherHelper::WrapIndex( iHP1 - 1, nbHP );
+ int iNext = SMESH_MesherHelper::WrapIndex( iHP1 + 1, nbHP );
+
+ int nbNotOut = 0;
+ const gp_XY* segEnds[2] = { 0, 0 }; // NOT_OUT points
+
+ for ( int iHP2 = 0; iHP2 < nbHP; ++iHP2 )
+ {
+ if ( iHP1 == iHP2 ) continue;
+
+ TIntPntState & ips1 = intPnts1[ iHP2 ];
+ if ( ips1.second == UNDEF )
+ {
+ // find an intersection point of boundaries of iHP1 and iHP2
+
+ if ( iHP2 == iPrev ) // intersection with neighbors is known
+ ips1.first = halfPlns[ iHP1 ]._pos;
+ else if ( iHP2 == iNext )
+ ips1.first = halfPlns[ iHP2 ]._pos;
+ else if ( !halfPlns[ iHP1 ].FindIntersection( halfPlns[ iHP2 ], ips1.first ))
+ ips1.second = NO_INT;
+
+ // classify the found intersection point
+ if ( ips1.second != NO_INT )
+ {
+ ips1.second = NOT_OUT;
+ for ( int i = 0; i < nbHP && ips1.second == NOT_OUT; ++i )
+ if ( i != iHP1 && i != iHP2 &&
+ halfPlns[ i ].IsOut( ips1.first, tol ))
+ ips1.second = IS_OUT;
+ }
+ vector< TIntPntState > & intPnts2 = allIntPnts[ iHP2 ];
+ if ( intPnts2.empty() ) intPnts2.resize( nbHP, undefIPS );
+ TIntPntState & ips2 = intPnts2[ iHP1 ];
+ ips2 = ips1;
+ }
+ if ( ips1.second == NOT_OUT )
+ {
+ ++nbNotOut;
+ segEnds[ bool(segEnds[0]) ] = & ips1.first;
+ }
+ }
+
+ // find a NOT_OUT segment of boundary which is located between
+ // two NOT_OUT int points
+
+ if ( nbNotOut < 2 )
+ continue; // no such a segment
+
+ if ( nbNotOut > 2 )
+ {
+ // sort points along the boundary
+ map< double, TIntPntState* > ipsByParam;
+ for ( int iHP2 = 0; iHP2 < nbHP; ++iHP2 )
+ {
+ TIntPntState & ips1 = intPnts1[ iHP2 ];
+ if ( ips1.second != NO_INT )
+ {
+ gp_XY op = ips1.first - halfPlns[ iHP1 ]._pos;
+ double param = op * halfPlns[ iHP1 ]._dir;
+ ipsByParam.insert( make_pair( param, & ips1 ));
+ }
+ }
+ // look for two neighboring NOT_OUT points
+ nbNotOut = 0;
+ map< double, TIntPntState* >::iterator u2ips = ipsByParam.begin();
+ for ( ; u2ips != ipsByParam.end(); ++u2ips )
+ {
+ TIntPntState & ips1 = *(u2ips->second);
+ if ( ips1.second == NOT_OUT )
+ segEnds[ bool( nbNotOut++ ) ] = & ips1.first;
+ else if ( nbNotOut >= 2 )
+ break;
+ else
+ nbNotOut = 0;
+ }
+ }
+
+ if ( nbNotOut >= 2 )
+ {
+ double len = ( *segEnds[0] - *segEnds[1] ).Modulus();
+ sumLen += len;
+
+ newPos2D += 0.5 * len * ( *segEnds[0] + *segEnds[1] );
+ }
+ }
+
+ if ( sumLen > 0 )
+ {
+ newPos2D /= sumLen;
+ newPos = center + xAxis * newPos2D.X() + yAxis * newPos2D.Y();
+ }
+ else
+ {
+ newPos = center;
+ }
+
+ return newPos;
+}
+#else // OLD_NEF_POLYGON
+{ ////////////////////////////////// NEW
+ gp_XYZ newPos(0,0,0);
+
+ // get a plane to search a solution on
+
+ size_t i;
+ gp_XYZ center(0,0,0);
+ for ( i = 0; i < _simplices.size(); ++i )
+ center += SMESH_TNodeXYZ( _simplices[i]._nPrev );
+ center /= _simplices.size();
+
+ vector< gp_XYZ > vecs( _simplices.size() + 1 );
+ for ( i = 0; i < _simplices.size(); ++i )
+ vecs[i] = SMESH_TNodeXYZ( _simplices[i]._nPrev ) - center;
+ vecs.back() = vecs[0];
+
+ const double tol = numeric_limits<double>::min();
+ gp_XYZ zAxis(0,0,0);
+ for ( i = 0; i < _simplices.size(); ++i )
+ {
+ gp_XYZ cross = vecs[i] ^ vecs[i+1];
+ try {
+ cross.Normalize();
+ if ( cross * zAxis < tol )
+ zAxis += cross.Reversed();
+ else
+ zAxis += cross;
+ }
+ catch (Standard_Failure) { // if |cross| == 0.
+ }
+ }
+
+ gp_XYZ yAxis;
+ for ( i = 0; i < _simplices.size(); ++i )
+ {
+ yAxis = vecs[i];
+ if ( yAxis.SquareModulus() > tol )
+ break;
+ }
+ gp_XYZ xAxis = yAxis ^ zAxis;
+ // SMESH_TNodeXYZ p0( _simplices[0]._nPrev );
+ // const double tol = 1e-6 * ( p0.Distance( _simplices[1]._nPrev ) +
+ // p0.Distance( _simplices[2]._nPrev ));
+ // gp_XYZ center = smoothLaplacian();
+ // gp_XYZ xAxis, yAxis, zAxis;
+ // for ( i = 0; i < _simplices.size(); ++i )
+ // {
+ // xAxis = SMESH_TNodeXYZ( _simplices[i]._nPrev ) - center;
+ // if ( xAxis.SquareModulus() > tol*tol )
+ // break;
+ // }
+ // for ( i = 1; i < _simplices.size(); ++i )
+ // {
+ // yAxis = SMESH_TNodeXYZ( _simplices[i]._nPrev ) - center;
+ // zAxis = xAxis ^ yAxis;
+ // if ( zAxis.SquareModulus() > tol*tol )
+ // break;
+ // }
+ // if ( i == _simplices.size() ) return newPos;
+
+ yAxis = zAxis ^ xAxis;
+ xAxis /= xAxis.Modulus();
+ yAxis /= yAxis.Modulus();
+
+ // get half-planes of _simplices
+
+ vector< _halfPlane > halfPlns( _simplices.size() );
+ int nbHP = 0;
+ for ( size_t i = 0; i < _simplices.size(); ++i )
+ {
+ const gp_XYZ& OP1 = vecs[ i ];
+ const gp_XYZ& OP2 = vecs[ i+1 ];
+ gp_XY p1( OP1 * xAxis, OP1 * yAxis );
+ gp_XY p2( OP2 * xAxis, OP2 * yAxis );
+ gp_XY vec12 = p2 - p1;
+ double dist12 = vec12.Modulus();
+ if ( dist12 < tol )
+ continue;
+ vec12 /= dist12;
+ halfPlns[ nbHP ]._pos = p1;
+ halfPlns[ nbHP ]._dir = vec12;
+ halfPlns[ nbHP ]._inNorm.SetCoord( -vec12.Y(), vec12.X() );
+ ++nbHP;
+ }
+
+ // intersect boundaries of half-planes, define state of intersection points
+ // in relation to all half-planes and calculate internal point of a 2D polygon
+
+ double sumLen = 0;
+ gp_XY newPos2D (0,0);
+
+ enum { UNDEF = -1, NOT_OUT, IS_OUT, NO_INT };
+ typedef std::pair< gp_XY, int > TIntPntState; // coord and isOut state
+ TIntPntState undefIPS( gp_XY(1e100,1e100), UNDEF );
+
+ vector< vector< TIntPntState > > allIntPnts( nbHP );
+ for ( int iHP1 = 0; iHP1 < nbHP; ++iHP1 )
+ {
+ vector< TIntPntState > & intPnts1 = allIntPnts[ iHP1 ];
+ if ( intPnts1.empty() ) intPnts1.resize( nbHP, undefIPS );
+
+ int iPrev = SMESH_MesherHelper::WrapIndex( iHP1 - 1, nbHP );
+ int iNext = SMESH_MesherHelper::WrapIndex( iHP1 + 1, nbHP );
+
+ int nbNotOut = 0;
+ const gp_XY* segEnds[2] = { 0, 0 }; // NOT_OUT points
+
+ for ( int iHP2 = 0; iHP2 < nbHP; ++iHP2 )
+ {
+ if ( iHP1 == iHP2 ) continue;
+
+ TIntPntState & ips1 = intPnts1[ iHP2 ];
+ if ( ips1.second == UNDEF )
+ {
+ // find an intersection point of boundaries of iHP1 and iHP2
+
+ if ( iHP2 == iPrev ) // intersection with neighbors is known
+ ips1.first = halfPlns[ iHP1 ]._pos;
+ else if ( iHP2 == iNext )
+ ips1.first = halfPlns[ iHP2 ]._pos;
+ else if ( !halfPlns[ iHP1 ].FindIntersection( halfPlns[ iHP2 ], ips1.first ))
+ ips1.second = NO_INT;
+
+ // classify the found intersection point
+ if ( ips1.second != NO_INT )
+ {
+ ips1.second = NOT_OUT;
+ for ( int i = 0; i < nbHP && ips1.second == NOT_OUT; ++i )
+ if ( i != iHP1 && i != iHP2 &&
+ halfPlns[ i ].IsOut( ips1.first, tol ))
+ ips1.second = IS_OUT;
+ }
+ vector< TIntPntState > & intPnts2 = allIntPnts[ iHP2 ];
+ if ( intPnts2.empty() ) intPnts2.resize( nbHP, undefIPS );
+ TIntPntState & ips2 = intPnts2[ iHP1 ];
+ ips2 = ips1;
+ }
+ if ( ips1.second == NOT_OUT )
+ {
+ ++nbNotOut;
+ segEnds[ bool(segEnds[0]) ] = & ips1.first;
+ }
+ }
+
+ // find a NOT_OUT segment of boundary which is located between
+ // two NOT_OUT int points
+
+ if ( nbNotOut < 2 )
+ continue; // no such a segment
+
+ if ( nbNotOut > 2 )
+ {
+ // sort points along the boundary
+ map< double, TIntPntState* > ipsByParam;
+ for ( int iHP2 = 0; iHP2 < nbHP; ++iHP2 )
+ {
+ TIntPntState & ips1 = intPnts1[ iHP2 ];
+ if ( ips1.second != NO_INT )
+ {
+ gp_XY op = ips1.first - halfPlns[ iHP1 ]._pos;
+ double param = op * halfPlns[ iHP1 ]._dir;
+ ipsByParam.insert( make_pair( param, & ips1 ));
+ }
+ }
+ // look for two neighboring NOT_OUT points
+ nbNotOut = 0;
+ map< double, TIntPntState* >::iterator u2ips = ipsByParam.begin();
+ for ( ; u2ips != ipsByParam.end(); ++u2ips )
+ {
+ TIntPntState & ips1 = *(u2ips->second);
+ if ( ips1.second == NOT_OUT )
+ segEnds[ bool( nbNotOut++ ) ] = & ips1.first;
+ else if ( nbNotOut >= 2 )
+ break;
+ else
+ nbNotOut = 0;
+ }
+ }
+
+ if ( nbNotOut >= 2 )
+ {
+ double len = ( *segEnds[0] - *segEnds[1] ).Modulus();
+ sumLen += len;
+
+ newPos2D += 0.5 * len * ( *segEnds[0] + *segEnds[1] );
+ }
+ }
+
+ if ( sumLen > 0 )
+ {
+ newPos2D /= sumLen;
+ newPos = center + xAxis * newPos2D.X() + yAxis * newPos2D.Y();
+ }
+ else
+ {
+ newPos = center;
+ }
+
+ return newPos;
+}
+#endif // OLD_NEF_POLYGON
+
+//================================================================================
+/*!
+ * \brief Add a new segment to _LayerEdge during inflation
+ */
+//================================================================================
+
+void _LayerEdge::SetNewLength( double len, _EdgesOnShape& eos, SMESH_MesherHelper& helper )
+{
+ if ( Is( BLOCKED ))
+ return;
+
+ if ( len > _maxLen )
+ {
+ len = _maxLen;
+ Block( eos.GetData() );
+ }
+ const double lenDelta = len - _len;
+ if ( lenDelta < len * 1e-3 )
+ {
+ Block( eos.GetData() );
+ return;
+ }
+
+ SMDS_MeshNode* n = const_cast< SMDS_MeshNode*>( _nodes.back() );
+ gp_XYZ oldXYZ = SMESH_TNodeXYZ( n );
+ gp_XYZ newXYZ;
+ if ( eos._hyp.IsOffsetMethod() )
+ {
+ newXYZ = oldXYZ;
+ gp_Vec faceNorm;
+ SMDS_ElemIteratorPtr faceIt = _nodes[0]->GetInverseElementIterator( SMDSAbs_Face );
+ while ( faceIt->more() )
+ {
+ const SMDS_MeshElement* face = faceIt->next();
+ if ( !eos.GetNormal( face, faceNorm ))
+ continue;
+
+ // translate plane of a face
+ gp_XYZ baryCenter = oldXYZ + faceNorm.XYZ() * lenDelta;
+
+ // find point of intersection of the face plane located at baryCenter
+ // and _normal located at newXYZ
+ double d = -( faceNorm.XYZ() * baryCenter ); // d of plane equation ax+by+cz+d=0
+ double dot = ( faceNorm.XYZ() * _normal );
+ if ( dot < std::numeric_limits<double>::min() )
+ dot = lenDelta * 1e-3;
+ double step = -( faceNorm.XYZ() * newXYZ + d ) / dot;
+ newXYZ += step * _normal;
+ }
+ _lenFactor = _normal * ( newXYZ - oldXYZ ) / lenDelta; // _lenFactor is used in InvalidateStep()
+ }
+ else
+ {
+ newXYZ = oldXYZ + _normal * lenDelta * _lenFactor;
+ }
+
+ n->setXYZ( newXYZ.X(), newXYZ.Y(), newXYZ.Z() );
+ _pos.push_back( newXYZ );
+
+ if ( !eos._sWOL.IsNull() )
+ {
+ double distXYZ[4];
+ bool uvOK = false;
+ if ( eos.SWOLType() == TopAbs_EDGE )
+ {
+ double u = Precision::Infinite(); // to force projection w/o distance check
+ uvOK = helper.CheckNodeU( TopoDS::Edge( eos._sWOL ), n, u,
+ /*tol=*/2*lenDelta, /*force=*/true, distXYZ );
+ _pos.back().SetCoord( u, 0, 0 );
+ if ( _nodes.size() > 1 && uvOK )
+ {
+ SMDS_EdgePositionPtr pos = n->GetPosition();
+ pos->SetUParameter( u );
+ }
+ }
+ else // TopAbs_FACE
+ {
+ gp_XY uv( Precision::Infinite(), 0 );
+ uvOK = helper.CheckNodeUV( TopoDS::Face( eos._sWOL ), n, uv,
+ /*tol=*/2*lenDelta, /*force=*/true, distXYZ );
+ _pos.back().SetCoord( uv.X(), uv.Y(), 0 );
+ if ( _nodes.size() > 1 && uvOK )
+ {
+ SMDS_FacePositionPtr pos = n->GetPosition();
+ pos->SetUParameter( uv.X() );
+ pos->SetVParameter( uv.Y() );
+ }
+ }
+ if ( uvOK )
+ {
+ n->setXYZ( distXYZ[1], distXYZ[2], distXYZ[3]);
+ }
+ else
+ {
+ n->setXYZ( oldXYZ.X(), oldXYZ.Y(), oldXYZ.Z() );
+ _pos.pop_back();
+ Block( eos.GetData() );
+ return;
+ }
+ }
+
+ _len = len;
+
+ // notify _neibors
+ if ( eos.ShapeType() != TopAbs_FACE )
+ {
+ for ( size_t i = 0; i < _neibors.size(); ++i )
+ //if ( _len > _neibors[i]->GetSmooLen() )
+ _neibors[i]->Set( MOVED );
+
+ Set( MOVED );
+ }
+ dumpMove( n ); //debug
+}
+
+//================================================================================
+/*!
+ * \brief Set BLOCKED flag and propagate limited _maxLen to _neibors
+ */
+//================================================================================
+
+void _LayerEdge::Block( _SolidData& data )
+{
+ //if ( Is( BLOCKED )) return;
+ Set( BLOCKED );
+
+ SMESH_Comment msg( "#BLOCK shape=");
+ msg << data.GetShapeEdges( this )->_shapeID
+ << ", nodes " << _nodes[0]->GetID() << ", " << _nodes.back()->GetID();
+ dumpCmd( msg + " -- BEGIN");
+
+ SetMaxLen( _len );
+ std::queue<_LayerEdge*> queue;
+ queue.push( this );
+
+ gp_Pnt pSrc, pTgt, pSrcN, pTgtN;
+ while ( !queue.empty() )
+ {
+ _LayerEdge* edge = queue.front(); queue.pop();
+ pSrc = SMESH_TNodeXYZ( edge->_nodes[0] );
+ pTgt = SMESH_TNodeXYZ( edge->_nodes.back() );
+ for ( size_t iN = 0; iN < edge->_neibors.size(); ++iN )
+ {
+ _LayerEdge* neibor = edge->_neibors[iN];
+ if ( neibor->_maxLen < edge->_maxLen * 1.01 )
+ continue;
+ pSrcN = SMESH_TNodeXYZ( neibor->_nodes[0] );
+ pTgtN = SMESH_TNodeXYZ( neibor->_nodes.back() );
+ double minDist = pSrc.SquareDistance( pSrcN );
+ minDist = Min( pTgt.SquareDistance( pTgtN ), minDist );
+ minDist = Min( pSrc.SquareDistance( pTgtN ), minDist );
+ minDist = Min( pTgt.SquareDistance( pSrcN ), minDist );
+ double newMaxLen = edge->_maxLen + 0.5 * Sqrt( minDist );
+ //if ( edge->_nodes[0]->getshapeId() == neibor->_nodes[0]->getshapeId() ) viscous_layers_00/A3
+ {
+ //newMaxLen *= edge->_lenFactor / neibor->_lenFactor;
+ // newMaxLen *= Min( edge->_lenFactor / neibor->_lenFactor,
+ // neibor->_lenFactor / edge->_lenFactor );
+ }
+ if ( neibor->_maxLen > newMaxLen )
+ {
+ neibor->SetMaxLen( newMaxLen );
+ if ( neibor->_maxLen < neibor->_len )
+ {
+ _EdgesOnShape* eos = data.GetShapeEdges( neibor );
+ int lastStep = neibor->Is( BLOCKED ) ? 1 : 0;
+ while ( neibor->_len > neibor->_maxLen &&
+ neibor->NbSteps() > lastStep )
+ neibor->InvalidateStep( neibor->NbSteps(), *eos, /*restoreLength=*/true );
+ neibor->SetNewLength( neibor->_maxLen, *eos, data.GetHelper() );
+ //neibor->Block( data );
+ }
+ queue.push( neibor );
+ }
+ }
+ }
+ dumpCmd( msg + " -- END");
+}
+
+//================================================================================
+/*!
+ * \brief Remove last inflation step
+ */
+//================================================================================
+
+void _LayerEdge::InvalidateStep( size_t curStep, const _EdgesOnShape& eos, bool restoreLength )
+{
+ if ( _pos.size() > curStep && _nodes.size() > 1 )
+ {
+ _pos.resize( curStep );
+
+ gp_Pnt nXYZ = _pos.back();
+ SMDS_MeshNode* n = const_cast< SMDS_MeshNode*>( _nodes.back() );
+ SMESH_TNodeXYZ curXYZ( n );
+ if ( !eos._sWOL.IsNull() )
+ {
+ TopLoc_Location loc;
+ if ( eos.SWOLType() == TopAbs_EDGE )
+ {
+ SMDS_EdgePositionPtr pos = n->GetPosition();
+ pos->SetUParameter( nXYZ.X() );
+ double f,l;
+ Handle(Geom_Curve) curve = BRep_Tool::Curve( TopoDS::Edge( eos._sWOL ), loc, f,l);
+ nXYZ = curve->Value( nXYZ.X() ).Transformed( loc );
+ }
+ else
+ {
+ SMDS_FacePositionPtr pos = n->GetPosition();
+ pos->SetUParameter( nXYZ.X() );
+ pos->SetVParameter( nXYZ.Y() );
+ Handle(Geom_Surface) surface = BRep_Tool::Surface( TopoDS::Face(eos._sWOL), loc );
+ nXYZ = surface->Value( nXYZ.X(), nXYZ.Y() ).Transformed( loc );
+ }
+ }
+ n->setXYZ( nXYZ.X(), nXYZ.Y(), nXYZ.Z() );
+ dumpMove( n );
+
+ if ( restoreLength )
+ {
+ if ( NbSteps() == 0 )
+ _len = 0.;
+ else if ( IsOnFace() && Is( MOVED ))
+ _len = ( nXYZ.XYZ() - SMESH_NodeXYZ( _nodes[0] )) * _normal;
+ else
+ _len -= ( nXYZ.XYZ() - curXYZ ).Modulus() / _lenFactor;
+ }
+ }
+ return;
+}
+
+//================================================================================
+/*!
+ * \brief Return index of a _pos distant from _normal
+ */
+//================================================================================
+
+int _LayerEdge::GetSmoothedPos( const double tol )
+{
+ int iSmoothed = 0;
+ for ( size_t i = 1; i < _pos.size() && !iSmoothed; ++i )
+ {
+ double normDist = ( _pos[i] - _pos[0] ).Crossed( _normal ).SquareModulus();
+ if ( normDist > tol * tol )
+ iSmoothed = i;
}
- gp_XYZ xAxis = yAxis ^ zAxis;
- // SMESH_TNodeXYZ p0( _simplices[0]._nPrev );
- // const double tol = 1e-6 * ( p0.Distance( _simplices[1]._nPrev ) +
- // p0.Distance( _simplices[2]._nPrev ));
- // gp_XYZ center = smoothLaplacian();
- // gp_XYZ xAxis, yAxis, zAxis;
- // for ( i = 0; i < _simplices.size(); ++i )
- // {
- // xAxis = SMESH_TNodeXYZ( _simplices[i]._nPrev ) - center;
- // if ( xAxis.SquareModulus() > tol*tol )
- // break;
- // }
- // for ( i = 1; i < _simplices.size(); ++i )
- // {
- // yAxis = SMESH_TNodeXYZ( _simplices[i]._nPrev ) - center;
- // zAxis = xAxis ^ yAxis;
- // if ( zAxis.SquareModulus() > tol*tol )
- // break;
- // }
- // if ( i == _simplices.size() ) return newPos;
+ return iSmoothed;
+}
- yAxis = zAxis ^ xAxis;
- xAxis /= xAxis.Modulus();
- yAxis /= yAxis.Modulus();
+//================================================================================
+/*!
+ * \brief Smooth a path formed by _pos of a _LayerEdge smoothed on FACE
+ */
+//================================================================================
- // get half-planes of _simplices
+void _LayerEdge::SmoothPos( const vector< double >& segLen, const double tol )
+{
+ if ( /*Is( NORMAL_UPDATED ) ||*/ _pos.size() <= 2 )
+ return;
- vector< _halfPlane > halfPlns( _simplices.size() );
- int nbHP = 0;
- for ( size_t i = 0; i < _simplices.size(); ++i )
+ // find the 1st smoothed _pos
+ int iSmoothed = GetSmoothedPos( tol );
+ if ( !iSmoothed ) return;
+
+ gp_XYZ normal = _normal;
+ if ( Is( NORMAL_UPDATED ))
{
- gp_XYZ OP1 = SMESH_TNodeXYZ( _simplices[i]._nPrev ) - center;
- gp_XYZ OP2 = SMESH_TNodeXYZ( _simplices[i]._nNext ) - center;
- gp_XY p1( OP1 * xAxis, OP1 * yAxis );
- gp_XY p2( OP2 * xAxis, OP2 * yAxis );
- gp_XY vec12 = p2 - p1;
- double dist12 = vec12.Modulus();
- if ( dist12 < tol )
- continue;
- vec12 /= dist12;
- halfPlns[ nbHP ]._pos = p1;
- halfPlns[ nbHP ]._dir = vec12;
- halfPlns[ nbHP ]._inNorm.SetCoord( -vec12.Y(), vec12.X() );
- ++nbHP;
+ double minDot = 1;
+ for ( size_t i = 0; i < _neibors.size(); ++i )
+ {
+ if ( _neibors[i]->IsOnFace() )
+ {
+ double dot = _normal * _neibors[i]->_normal;
+ if ( dot < minDot )
+ {
+ normal = _neibors[i]->_normal;
+ minDot = dot;
+ }
+ }
+ }
+ if ( minDot == 1. )
+ for ( size_t i = 1; i < _pos.size(); ++i )
+ {
+ normal = _pos[i] - _pos[0];
+ double size = normal.Modulus();
+ if ( size > RealSmall() )
+ {
+ normal /= size;
+ break;
+ }
+ }
+ }
+ const double r = 0.2;
+ for ( int iter = 0; iter < 50; ++iter )
+ {
+ double minDot = 1;
+ for ( size_t i = Max( 1, iSmoothed-1-iter ); i < _pos.size()-1; ++i )
+ {
+ gp_XYZ midPos = 0.5 * ( _pos[i-1] + _pos[i+1] );
+ gp_XYZ newPos = ( 1-r ) * midPos + r * _pos[i];
+ _pos[i] = newPos;
+ double midLen = 0.5 * ( segLen[i-1] + segLen[i+1] );
+ double newLen = ( 1-r ) * midLen + r * segLen[i];
+ const_cast< double& >( segLen[i] ) = newLen;
+ // check angle between normal and (_pos[i+1], _pos[i] )
+ gp_XYZ posDir = _pos[i+1] - _pos[i];
+ double size = posDir.SquareModulus();
+ if ( size > RealSmall() )
+ minDot = Min( minDot, ( normal * posDir ) * ( normal * posDir ) / size );
+ }
+ if ( minDot > 0.5 * 0.5 )
+ break;
}
+ return;
+}
- // intersect boundaries of half-planes, define state of intersection points
- // in relation to all half-planes and calculate internal point of a 2D polygon
+//================================================================================
+/*!
+ * \brief Print flags
+ */
+//================================================================================
- double sumLen = 0;
- gp_XY newPos2D (0,0);
+std::string _LayerEdge::DumpFlags() const
+{
+ SMESH_Comment dump;
+ for ( int flag = 1; flag < 0x1000000; flag *= 2 )
+ if ( _flags & flag )
+ {
+ EFlags f = (EFlags) flag;
+ switch ( f ) {
+ case TO_SMOOTH: dump << "TO_SMOOTH"; break;
+ case MOVED: dump << "MOVED"; break;
+ case SMOOTHED: dump << "SMOOTHED"; break;
+ case DIFFICULT: dump << "DIFFICULT"; break;
+ case ON_CONCAVE_FACE: dump << "ON_CONCAVE_FACE"; break;
+ case BLOCKED: dump << "BLOCKED"; break;
+ case INTERSECTED: dump << "INTERSECTED"; break;
+ case NORMAL_UPDATED: dump << "NORMAL_UPDATED"; break;
+ case UPD_NORMAL_CONV: dump << "UPD_NORMAL_CONV"; break;
+ case MARKED: dump << "MARKED"; break;
+ case MULTI_NORMAL: dump << "MULTI_NORMAL"; break;
+ case NEAR_BOUNDARY: dump << "NEAR_BOUNDARY"; break;
+ case SMOOTHED_C1: dump << "SMOOTHED_C1"; break;
+ case DISTORTED: dump << "DISTORTED"; break;
+ case RISKY_SWOL: dump << "RISKY_SWOL"; break;
+ case SHRUNK: dump << "SHRUNK"; break;
+ case UNUSED_FLAG: dump << "UNUSED_FLAG"; break;
+ }
+ dump << " ";
+ }
+ cout << dump << endl;
+ return dump;
+}
- enum { UNDEF = -1, NOT_OUT, IS_OUT, NO_INT };
- typedef std::pair< gp_XY, int > TIntPntState; // coord and isOut state
- TIntPntState undefIPS( gp_XY(1e100,1e100), UNDEF );
- vector< vector< TIntPntState > > allIntPnts( nbHP );
- for ( int iHP1 = 0; iHP1 < nbHP; ++iHP1 )
+//================================================================================
+/*!
+ * \brief Create layers of prisms
+ */
+//================================================================================
+
+bool _ViscousBuilder::refine(_SolidData& data)
+{
+ SMESH_MesherHelper& helper = data.GetHelper();
+ helper.SetElementsOnShape(false);
+
+ Handle(Geom_Curve) curve;
+ Handle(ShapeAnalysis_Surface) surface;
+ TopoDS_Edge geomEdge;
+ TopoDS_Face geomFace;
+ TopLoc_Location loc;
+ double f,l, u = 0;
+ gp_XY uv;
+ vector< gp_XYZ > pos3D;
+ bool isOnEdge, isTooConvexFace = false;
+ TGeomID prevBaseId = -1;
+ TNode2Edge* n2eMap = 0;
+ TNode2Edge::iterator n2e;
+
+ // Create intermediate nodes on each _LayerEdge
+
+ for ( size_t iS = 0; iS < data._edgesOnShape.size(); ++iS )
{
- vector< TIntPntState > & intPnts1 = allIntPnts[ iHP1 ];
- if ( intPnts1.empty() ) intPnts1.resize( nbHP, undefIPS );
+ _EdgesOnShape& eos = data._edgesOnShape[iS];
+ if ( eos._edges.empty() ) continue;
- int iPrev = SMESH_MesherHelper::WrapIndex( iHP1 - 1, nbHP );
- int iNext = SMESH_MesherHelper::WrapIndex( iHP1 + 1, nbHP );
+ if ( eos._edges[0]->_nodes.size() < 2 )
+ continue; // on _noShrinkShapes
- int nbNotOut = 0;
- const gp_XY* segEnds[2] = { 0, 0 }; // NOT_OUT points
+ // get data of a shrink shape
+ isOnEdge = false;
+ geomEdge.Nullify(); geomFace.Nullify();
+ curve.Nullify(); surface.Nullify();
+ if ( !eos._sWOL.IsNull() )
+ {
+ isOnEdge = ( eos.SWOLType() == TopAbs_EDGE );
+ if ( isOnEdge )
+ {
+ geomEdge = TopoDS::Edge( eos._sWOL );
+ curve = BRep_Tool::Curve( geomEdge, loc, f,l);
+ }
+ else
+ {
+ geomFace = TopoDS::Face( eos._sWOL );
+ surface = helper.GetSurface( geomFace );
+ }
+ }
+ else if ( eos.ShapeType() == TopAbs_FACE && eos._toSmooth )
+ {
+ geomFace = TopoDS::Face( eos._shape );
+ surface = helper.GetSurface( geomFace );
+ // propagate _toSmooth back to _eosC1, which was unset in findShapesToSmooth()
+ for ( size_t i = 0; i < eos._eosC1.size(); ++i )
+ eos._eosC1[ i ]->_toSmooth = true;
- for ( int iHP2 = 0; iHP2 < nbHP; ++iHP2 )
+ isTooConvexFace = false;
+ if ( _ConvexFace* cf = data.GetConvexFace( eos._shapeID ))
+ isTooConvexFace = cf->_isTooCurved;
+ }
+
+ vector< double > segLen;
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
{
- if ( iHP1 == iHP2 ) continue;
+ _LayerEdge& edge = *eos._edges[i];
+ if ( edge._pos.size() < 2 )
+ continue;
- TIntPntState & ips1 = intPnts1[ iHP2 ];
- if ( ips1.second == UNDEF )
+ // get accumulated length of segments
+ segLen.resize( edge._pos.size() );
+ segLen[0] = 0.0;
+ if ( eos._sWOL.IsNull() )
{
- // find an intersection point of boundaries of iHP1 and iHP2
+ bool useNormal = true;
+ bool usePos = false;
+ bool smoothed = false;
+ double preci = 0.1 * edge._len;
+ if ( eos._toSmooth && edge._pos.size() > 2 )
+ {
+ smoothed = edge.GetSmoothedPos( preci );
+ }
+ if ( smoothed )
+ {
+ if ( !surface.IsNull() && !isTooConvexFace ) // edge smoothed on FACE
+ {
+ useNormal = usePos = false;
+ gp_Pnt2d uv = helper.GetNodeUV( geomFace, edge._nodes[0] );
+ for ( size_t j = 1; j < edge._pos.size() && !useNormal; ++j )
+ {
+ uv = surface->NextValueOfUV( uv, edge._pos[j], preci );
+ if ( surface->Gap() < 2. * edge._len )
+ segLen[j] = surface->Gap();
+ else
+ useNormal = true;
+ }
+ }
+ }
+ else if ( !edge.Is( _LayerEdge::NORMAL_UPDATED ))
+ {
+#ifndef __NODES_AT_POS
+ useNormal = usePos = false;
+ edge._pos[1] = edge._pos.back();
+ edge._pos.resize( 2 );
+ segLen.resize( 2 );
+ segLen[ 1 ] = edge._len;
+#endif
+ }
+ if ( useNormal && edge.Is( _LayerEdge::NORMAL_UPDATED ))
+ {
+ useNormal = usePos = false;
+ _LayerEdge tmpEdge; // get original _normal
+ tmpEdge._nodes.push_back( edge._nodes[0] );
+ if ( !setEdgeData( tmpEdge, eos, helper, data ))
+ usePos = true;
+ else
+ for ( size_t j = 1; j < edge._pos.size(); ++j )
+ segLen[j] = ( edge._pos[j] - edge._pos[0] ) * tmpEdge._normal;
+ }
+ if ( useNormal )
+ {
+ for ( size_t j = 1; j < edge._pos.size(); ++j )
+ segLen[j] = ( edge._pos[j] - edge._pos[0] ) * edge._normal;
+ }
+ if ( usePos )
+ {
+ for ( size_t j = 1; j < edge._pos.size(); ++j )
+ segLen[j] = segLen[j-1] + ( edge._pos[j-1] - edge._pos[j] ).Modulus();
+ }
+ else
+ {
+ bool swapped = ( edge._pos.size() > 2 );
+ while ( swapped )
+ {
+ swapped = false;
+ for ( size_t j = 1; j < edge._pos.size()-1; ++j )
+ if ( segLen[j] > segLen.back() )
+ {
+ segLen.erase( segLen.begin() + j );
+ edge._pos.erase( edge._pos.begin() + j );
+ --j;
+ }
+ else if ( segLen[j] < segLen[j-1] )
+ {
+ std::swap( segLen[j], segLen[j-1] );
+ std::swap( edge._pos[j], edge._pos[j-1] );
+ swapped = true;
+ }
+ }
+ }
+ // smooth a path formed by edge._pos
+#ifndef __NODES_AT_POS
+ if (( smoothed ) /*&&
+ ( eos.ShapeType() == TopAbs_FACE || edge.Is( _LayerEdge::SMOOTHED_C1 ))*/)
+ edge.SmoothPos( segLen, preci );
+#endif
+ }
+ else if ( eos._isRegularSWOL ) // usual SWOL
+ {
+ if ( edge.Is( _LayerEdge::SMOOTHED ))
+ {
+ SMESH_NodeXYZ p0( edge._nodes[0] );
+ for ( size_t j = 1; j < edge._pos.size(); ++j )
+ {
+ gp_XYZ pj = surface->Value( edge._pos[j].X(), edge._pos[j].Y() ).XYZ();
+ segLen[j] = ( pj - p0 ) * edge._normal;
+ }
+ }
+ else
+ {
+ for ( size_t j = 1; j < edge._pos.size(); ++j )
+ segLen[j] = segLen[j-1] + (edge._pos[j-1] - edge._pos[j] ).Modulus();
+ }
+ }
+ else if ( !surface.IsNull() ) // SWOL surface with singularities
+ {
+ pos3D.resize( edge._pos.size() );
+ for ( size_t j = 0; j < edge._pos.size(); ++j )
+ pos3D[j] = surface->Value( edge._pos[j].X(), edge._pos[j].Y() ).XYZ();
- if ( iHP2 == iPrev ) // intersection with neighbors is known
- ips1.first = halfPlns[ iHP1 ]._pos;
- else if ( iHP2 == iNext )
- ips1.first = halfPlns[ iHP2 ]._pos;
- else if ( !halfPlns[ iHP1 ].FindInterestion( halfPlns[ iHP2 ], ips1.first ))
- ips1.second = NO_INT;
+ for ( size_t j = 1; j < edge._pos.size(); ++j )
+ segLen[j] = segLen[j-1] + ( pos3D[j-1] - pos3D[j] ).Modulus();
+ }
- // classify the found intersection point
- if ( ips1.second != NO_INT )
+ // allocate memory for new nodes if it is not yet refined
+ const SMDS_MeshNode* tgtNode = edge._nodes.back();
+ if ( edge._nodes.size() == 2 )
+ {
+#ifdef __NODES_AT_POS
+ int nbNodes = edge._pos.size();
+#else
+ int nbNodes = eos._hyp.GetNumberLayers() + 1;
+#endif
+ edge._nodes.resize( nbNodes, 0 );
+ edge._nodes[1] = 0;
+ edge._nodes.back() = tgtNode;
+ }
+ // restore shapePos of the last node by already treated _LayerEdge of another _SolidData
+ const TGeomID baseShapeId = edge._nodes[0]->getshapeId();
+ if ( baseShapeId != prevBaseId )
+ {
+ map< TGeomID, TNode2Edge* >::iterator s2ne = data._s2neMap.find( baseShapeId );
+ n2eMap = ( s2ne == data._s2neMap.end() ) ? 0 : s2ne->second;
+ prevBaseId = baseShapeId;
+ }
+ _LayerEdge* edgeOnSameNode = 0;
+ bool useExistingPos = false;
+ if ( n2eMap && (( n2e = n2eMap->find( edge._nodes[0] )) != n2eMap->end() ))
+ {
+ edgeOnSameNode = n2e->second;
+ useExistingPos = ( edgeOnSameNode->_len < edge._len );
+ const gp_XYZ& otherTgtPos = edgeOnSameNode->_pos.back();
+ SMDS_PositionPtr lastPos = tgtNode->GetPosition();
+ if ( isOnEdge )
{
- ips1.second = NOT_OUT;
- for ( int i = 0; i < nbHP && ips1.second == NOT_OUT; ++i )
- if ( i != iHP1 && i != iHP2 &&
- halfPlns[ i ].IsOut( ips1.first, tol ))
- ips1.second = IS_OUT;
+ SMDS_EdgePositionPtr epos = lastPos;
+ epos->SetUParameter( otherTgtPos.X() );
+ }
+ else
+ {
+ SMDS_FacePositionPtr fpos = lastPos;
+ fpos->SetUParameter( otherTgtPos.X() );
+ fpos->SetVParameter( otherTgtPos.Y() );
}
- vector< TIntPntState > & intPnts2 = allIntPnts[ iHP2 ];
- if ( intPnts2.empty() ) intPnts2.resize( nbHP, undefIPS );
- TIntPntState & ips2 = intPnts2[ iHP1 ];
- ips2 = ips1;
}
- if ( ips1.second == NOT_OUT )
+ // calculate height of the first layer
+ double h0;
+ const double T = segLen.back(); //data._hyp.GetTotalThickness();
+ const double f = eos._hyp.GetStretchFactor();
+ const int N = eos._hyp.GetNumberLayers();
+ const double fPowN = pow( f, N );
+ if ( fPowN - 1 <= numeric_limits<double>::min() )
+ h0 = T / N;
+ else
+ h0 = T * ( f - 1 )/( fPowN - 1 );
+
+ const double zeroLen = std::numeric_limits<double>::min();
+
+ // create intermediate nodes
+ double hSum = 0, hi = h0/f;
+ size_t iSeg = 1;
+ for ( size_t iStep = 1; iStep < edge._nodes.size(); ++iStep )
+ {
+ // compute an intermediate position
+ hi *= f;
+ hSum += hi;
+ while ( hSum > segLen[iSeg] && iSeg < segLen.size()-1 )
+ ++iSeg;
+ int iPrevSeg = iSeg-1;
+ while ( fabs( segLen[iPrevSeg] - segLen[iSeg]) <= zeroLen && iPrevSeg > 0 )
+ --iPrevSeg;
+ double r = ( segLen[iSeg] - hSum ) / ( segLen[iSeg] - segLen[iPrevSeg] );
+ gp_Pnt pos = r * edge._pos[iPrevSeg] + (1-r) * edge._pos[iSeg];
+#ifdef __NODES_AT_POS
+ pos = edge._pos[ iStep ];
+#endif
+ SMDS_MeshNode*& node = const_cast< SMDS_MeshNode*& >( edge._nodes[ iStep ]);
+ if ( !eos._sWOL.IsNull() )
+ {
+ // compute XYZ by parameters <pos>
+ if ( isOnEdge )
+ {
+ u = pos.X();
+ if ( !node )
+ pos = curve->Value( u ).Transformed(loc);
+ }
+ else if ( eos._isRegularSWOL )
+ {
+ uv.SetCoord( pos.X(), pos.Y() );
+ if ( !node )
+ pos = surface->Value( pos.X(), pos.Y() );
+ }
+ else
+ {
+ uv.SetCoord( pos.X(), pos.Y() );
+ gp_Pnt p = r * pos3D[ iPrevSeg ] + (1-r) * pos3D[ iSeg ];
+ uv = surface->NextValueOfUV( uv, p, BRep_Tool::Tolerance( geomFace )).XY();
+ if ( !node )
+ pos = surface->Value( uv );
+ }
+ }
+ // create or update the node
+ if ( !node )
+ {
+ node = helper.AddNode( pos.X(), pos.Y(), pos.Z());
+ if ( !eos._sWOL.IsNull() )
+ {
+ if ( isOnEdge )
+ getMeshDS()->SetNodeOnEdge( node, geomEdge, u );
+ else
+ getMeshDS()->SetNodeOnFace( node, geomFace, uv.X(), uv.Y() );
+ }
+ else
+ {
+ getMeshDS()->SetNodeInVolume( node, helper.GetSubShapeID() );
+ }
+ }
+ else
+ {
+ if ( !eos._sWOL.IsNull() )
+ {
+ // make average pos from new and current parameters
+ if ( isOnEdge )
+ {
+ //u = 0.5 * ( u + helper.GetNodeU( geomEdge, node ));
+ if ( useExistingPos )
+ u = helper.GetNodeU( geomEdge, node );
+ pos = curve->Value( u ).Transformed(loc);
+
+ SMDS_EdgePositionPtr epos = node->GetPosition();
+ epos->SetUParameter( u );
+ }
+ else
+ {
+ //uv = 0.5 * ( uv + helper.GetNodeUV( geomFace, node ));
+ if ( useExistingPos )
+ uv = helper.GetNodeUV( geomFace, node );
+ pos = surface->Value( uv );
+
+ SMDS_FacePositionPtr fpos = node->GetPosition();
+ fpos->SetUParameter( uv.X() );
+ fpos->SetVParameter( uv.Y() );
+ }
+ }
+ node->setXYZ( pos.X(), pos.Y(), pos.Z() );
+ }
+ } // loop on edge._nodes
+
+ if ( !eos._sWOL.IsNull() ) // prepare for shrink()
+ {
+ if ( isOnEdge )
+ edge._pos.back().SetCoord( u, 0,0);
+ else
+ edge._pos.back().SetCoord( uv.X(), uv.Y() ,0);
+
+ if ( edgeOnSameNode )
+ edgeOnSameNode->_pos.back() = edge._pos.back();
+ }
+
+ } // loop on eos._edges to create nodes
+
+
+ if ( !getMeshDS()->IsEmbeddedMode() )
+ // Log node movement
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ {
+ SMESH_TNodeXYZ p ( eos._edges[i]->_nodes.back() );
+ getMeshDS()->MoveNode( p._node, p.X(), p.Y(), p.Z() );
+ }
+ }
+
+
+ // Create volumes
+
+ helper.SetElementsOnShape(true);
+
+ vector< vector<const SMDS_MeshNode*>* > nnVec;
+ set< vector<const SMDS_MeshNode*>* > nnSet;
+ set< int > degenEdgeInd;
+ vector<const SMDS_MeshElement*> degenVols;
+
+ TopExp_Explorer exp( data._solid, TopAbs_FACE );
+ for ( ; exp.More(); exp.Next() )
+ {
+ const TGeomID faceID = getMeshDS()->ShapeToIndex( exp.Current() );
+ if ( data._ignoreFaceIds.count( faceID ))
+ continue;
+ _EdgesOnShape* eos = data.GetShapeEdges( faceID );
+ SMDS_MeshGroup* group = StdMeshers_ViscousLayers::CreateGroup( eos->_hyp.GetGroupName(),
+ *helper.GetMesh(),
+ SMDSAbs_Volume );
+ std::vector< const SMDS_MeshElement* > vols;
+ const bool isReversedFace = data._reversedFaceIds.count( faceID );
+ SMESHDS_SubMesh* fSubM = getMeshDS()->MeshElements( exp.Current() );
+ SMDS_ElemIteratorPtr fIt = fSubM->GetElements();
+ while ( fIt->more() )
+ {
+ const SMDS_MeshElement* face = fIt->next();
+ const int nbNodes = face->NbCornerNodes();
+ nnVec.resize( nbNodes );
+ nnSet.clear();
+ degenEdgeInd.clear();
+ size_t maxZ = 0, minZ = std::numeric_limits<size_t>::max();
+ SMDS_NodeIteratorPtr nIt = face->nodeIterator();
+ for ( int iN = 0; iN < nbNodes; ++iN )
{
- ++nbNotOut;
- segEnds[ bool(segEnds[0]) ] = & ips1.first;
+ const SMDS_MeshNode* n = nIt->next();
+ _LayerEdge* edge = data._n2eMap[ n ];
+ const int i = isReversedFace ? nbNodes-1-iN : iN;
+ nnVec[ i ] = & edge->_nodes;
+ maxZ = std::max( maxZ, nnVec[ i ]->size() );
+ minZ = std::min( minZ, nnVec[ i ]->size() );
+
+ if ( helper.HasDegeneratedEdges() )
+ nnSet.insert( nnVec[ i ]);
}
- }
- // find a NOT_OUT segment of boundary which is located between
- // two NOT_OUT int points
+ if ( maxZ == 0 )
+ continue;
+ if ( 0 < nnSet.size() && nnSet.size() < 3 )
+ continue;
- if ( nbNotOut < 2 )
- continue; // no such a segment
+ vols.clear();
+ const SMDS_MeshElement* vol;
- if ( nbNotOut > 2 )
- {
- // sort points along the boundary
- map< double, TIntPntState* > ipsByParam;
- for ( int iHP2 = 0; iHP2 < nbHP; ++iHP2 )
+ switch ( nbNodes )
{
- TIntPntState & ips1 = intPnts1[ iHP2 ];
- if ( ips1.second != NO_INT )
+ case 3: // TRIA
+ {
+ // PENTA
+ for ( size_t iZ = 1; iZ < minZ; ++iZ )
{
- gp_XY op = ips1.first - halfPlns[ iHP1 ]._pos;
- double param = op * halfPlns[ iHP1 ]._dir;
- ipsByParam.insert( make_pair( param, & ips1 ));
+ vol = helper.AddVolume( (*nnVec[0])[iZ-1], (*nnVec[1])[iZ-1], (*nnVec[2])[iZ-1],
+ (*nnVec[0])[iZ], (*nnVec[1])[iZ], (*nnVec[2])[iZ]);
+ vols.push_back( vol );
+ }
+
+ for ( size_t iZ = minZ; iZ < maxZ; ++iZ )
+ {
+ for ( int iN = 0; iN < nbNodes; ++iN )
+ if ( nnVec[ iN ]->size() < iZ+1 )
+ degenEdgeInd.insert( iN );
+
+ if ( degenEdgeInd.size() == 1 ) // PYRAM
+ {
+ int i2 = *degenEdgeInd.begin();
+ int i0 = helper.WrapIndex( i2 - 1, nbNodes );
+ int i1 = helper.WrapIndex( i2 + 1, nbNodes );
+ vol = helper.AddVolume( (*nnVec[i0])[iZ-1], (*nnVec[i1])[iZ-1],
+ (*nnVec[i1])[iZ ], (*nnVec[i0])[iZ ], (*nnVec[i2]).back());
+ vols.push_back( vol );
+ }
+ else // TETRA
+ {
+ int i3 = !degenEdgeInd.count(0) ? 0 : !degenEdgeInd.count(1) ? 1 : 2;
+ vol = helper.AddVolume( (*nnVec[ 0 ])[ i3 == 0 ? iZ-1 : nnVec[0]->size()-1 ],
+ (*nnVec[ 1 ])[ i3 == 1 ? iZ-1 : nnVec[1]->size()-1 ],
+ (*nnVec[ 2 ])[ i3 == 2 ? iZ-1 : nnVec[2]->size()-1 ],
+ (*nnVec[ i3 ])[ iZ ]);
+ vols.push_back( vol );
+ }
}
+ break; // TRIA
}
- // look for two neighboring NOT_OUT points
- nbNotOut = 0;
- map< double, TIntPntState* >::iterator u2ips = ipsByParam.begin();
- for ( ; u2ips != ipsByParam.end(); ++u2ips )
+ case 4: // QUAD
{
- TIntPntState & ips1 = *(u2ips->second);
- if ( ips1.second == NOT_OUT )
- segEnds[ bool( nbNotOut++ ) ] = & ips1.first;
- else if ( nbNotOut >= 2 )
+ // HEX
+ for ( size_t iZ = 1; iZ < minZ; ++iZ )
+ {
+ vol = helper.AddVolume( (*nnVec[0])[iZ-1], (*nnVec[1])[iZ-1],
+ (*nnVec[2])[iZ-1], (*nnVec[3])[iZ-1],
+ (*nnVec[0])[iZ], (*nnVec[1])[iZ],
+ (*nnVec[2])[iZ], (*nnVec[3])[iZ]);
+ vols.push_back( vol );
+ }
+
+ for ( size_t iZ = minZ; iZ < maxZ; ++iZ )
+ {
+ for ( int iN = 0; iN < nbNodes; ++iN )
+ if ( nnVec[ iN ]->size() < iZ+1 )
+ degenEdgeInd.insert( iN );
+
+ switch ( degenEdgeInd.size() )
+ {
+ case 2: // PENTA
+ {
+ int i2 = *degenEdgeInd.begin();
+ int i3 = *degenEdgeInd.rbegin();
+ bool ok = ( i3 - i2 == 1 );
+ if ( i2 == 0 && i3 == 3 ) { i2 = 3; i3 = 0; ok = true; }
+ int i0 = helper.WrapIndex( i3 + 1, nbNodes );
+ int i1 = helper.WrapIndex( i0 + 1, nbNodes );
+
+ vol = helper.AddVolume( nnVec[i3]->back(), (*nnVec[i0])[iZ], (*nnVec[i0])[iZ-1],
+ nnVec[i2]->back(), (*nnVec[i1])[iZ], (*nnVec[i1])[iZ-1]);
+ vols.push_back( vol );
+ if ( !ok && vol )
+ degenVols.push_back( vol );
+ }
break;
- else
- nbNotOut = 0;
+
+ default: // degen HEX
+ {
+ vol = helper.AddVolume( nnVec[0]->size() > iZ-1 ? (*nnVec[0])[iZ-1] : nnVec[0]->back(),
+ nnVec[1]->size() > iZ-1 ? (*nnVec[1])[iZ-1] : nnVec[1]->back(),
+ nnVec[2]->size() > iZ-1 ? (*nnVec[2])[iZ-1] : nnVec[2]->back(),
+ nnVec[3]->size() > iZ-1 ? (*nnVec[3])[iZ-1] : nnVec[3]->back(),
+ nnVec[0]->size() > iZ ? (*nnVec[0])[iZ] : nnVec[0]->back(),
+ nnVec[1]->size() > iZ ? (*nnVec[1])[iZ] : nnVec[1]->back(),
+ nnVec[2]->size() > iZ ? (*nnVec[2])[iZ] : nnVec[2]->back(),
+ nnVec[3]->size() > iZ ? (*nnVec[3])[iZ] : nnVec[3]->back());
+ vols.push_back( vol );
+ degenVols.push_back( vol );
+ }
+ }
+ }
+ break; // HEX
}
- }
+ default:
+ return error("Not supported type of element", data._index);
- if ( nbNotOut >= 2 )
- {
- double len = ( *segEnds[0] - *segEnds[1] ).Modulus();
- sumLen += len;
+ } // switch ( nbNodes )
- newPos2D += 0.5 * len * ( *segEnds[0] + *segEnds[1] );
- }
- }
+ if ( group )
+ for ( size_t i = 0; i < vols.size(); ++i )
+ group->Add( vols[ i ]);
- if ( sumLen > 0 )
- {
- newPos2D /= sumLen;
- newPos = center + xAxis * newPos2D.X() + yAxis * newPos2D.Y();
- }
- else
+ } // while ( fIt->more() )
+ } // loop on FACEs
+
+ if ( !degenVols.empty() )
{
- newPos = center;
+ SMESH_ComputeErrorPtr& err = _mesh->GetSubMesh( data._solid )->GetComputeError();
+ if ( !err || err->IsOK() )
+ {
+ SMESH_BadInputElements* badElems =
+ new SMESH_BadInputElements( getMeshDS(), COMPERR_WARNING, "Bad quality volumes created" );
+ badElems->myBadElements.insert( badElems->myBadElements.end(),
+ degenVols.begin(),degenVols.end() );
+ err.reset( badElems );
+ }
}
- return newPos;
+ return true;
}
-//================================================================================
-/*!
- * \brief Add a new segment to _LayerEdge during inflation
- */
-//================================================================================
-
-void _LayerEdge::SetNewLength( double len, SMESH_MesherHelper& helper )
+namespace VISCOUS_3D
{
- if ( _len - len > -1e-6 )
+ struct ShrinkFace;
+ //--------------------------------------------------------------------------------
+ /*!
+ * \brief Pair of periodic FACEs
+ */
+ struct PeriodicFaces
{
- //_pos.push_back( _pos.back() );
- return;
- }
+ typedef StdMeshers_ProjectionUtils::TrsfFinder3D Trsf;
- SMDS_MeshNode* n = const_cast< SMDS_MeshNode*>( _nodes.back() );
- SMESH_TNodeXYZ oldXYZ( n );
- gp_XYZ nXYZ = oldXYZ + _normal * ( len - _len ) * _lenFactor;
- n->setXYZ( nXYZ.X(), nXYZ.Y(), nXYZ.Z() );
+ ShrinkFace* _shriFace[2];
+ TNodeNodeMap _nnMap;
+ Trsf _trsf;
- _pos.push_back( nXYZ );
- _len = len;
- if ( !_sWOL.IsNull() )
+ PeriodicFaces( ShrinkFace* sf1, ShrinkFace* sf2 ): _shriFace{ sf1, sf2 } {}
+ bool IncludeShrunk( const TopoDS_Face& face, const TopTools_MapOfShape& shrunkFaces ) const;
+ bool MoveNodes( const TopoDS_Face& tgtFace );
+ void Clear() { _nnMap.clear(); }
+ bool IsEmpty() const { return _nnMap.empty(); }
+ };
+
+ //--------------------------------------------------------------------------------
+ /*!
+ * \brief Shrink FACE data used to find periodic FACEs
+ */
+ struct ShrinkFace
{
- double distXYZ[4];
- if ( _sWOL.ShapeType() == TopAbs_EDGE )
+ // ................................................................................
+ struct BndPart //!< part of FACE boundary, either shrink or no-shrink
{
- double u = Precision::Infinite(); // to force projection w/o distance check
- helper.CheckNodeU( TopoDS::Edge( _sWOL ), n, u, 1e-10, /*force=*/true, distXYZ );
- _pos.back().SetCoord( u, 0, 0 );
- if ( _nodes.size() > 1 )
+ bool _isShrink, _isReverse;
+ int _nbSegments;
+ AverageHyp* _hyp;
+ std::vector< SMESH_NodeXYZ > _nodes;
+ TopAbs_ShapeEnum _vertSWOLType[2]; // shrink part includes VERTEXes
+ AverageHyp* _vertHyp[2];
+
+ BndPart():
+ _isShrink(0), _isReverse(0), _nbSegments(0), _hyp(0),
+ _vertSWOLType{ TopAbs_WIRE, TopAbs_WIRE }, _vertHyp{ 0, 0 }
+ {}
+
+ bool operator==( const BndPart& other ) const
{
- SMDS_EdgePosition* pos = static_cast<SMDS_EdgePosition*>( n->GetPosition() );
- pos->SetUParameter( u );
+ return ( _isShrink == other._isShrink &&
+ _nbSegments == other._nbSegments &&
+ _nodes.size() == other._nodes.size() &&
+ vertSWOLType1() == other.vertSWOLType1() &&
+ vertSWOLType2() == other.vertSWOLType2() &&
+ (( !_isShrink ) ||
+ ( *_hyp == *other._hyp &&
+ vertHyp1() == other.vertHyp1() &&
+ vertHyp2() == other.vertHyp2() ))
+ );
}
- }
- else // TopAbs_FACE
- {
- gp_XY uv( Precision::Infinite(), 0 );
- helper.CheckNodeUV( TopoDS::Face( _sWOL ), n, uv, 1e-10, /*force=*/true, distXYZ );
- _pos.back().SetCoord( uv.X(), uv.Y(), 0 );
- if ( _nodes.size() > 1 )
+ bool CanAppend( const BndPart& other )
{
- SMDS_FacePosition* pos = static_cast<SMDS_FacePosition*>( n->GetPosition() );
- pos->SetUParameter( uv.X() );
- pos->SetVParameter( uv.Y() );
+ return ( _isShrink == other._isShrink &&
+ (( !_isShrink ) ||
+ ( *_hyp == *other._hyp &&
+ *_hyp == vertHyp2() &&
+ vertHyp2() == other.vertHyp1() ))
+ );
}
- }
- n->setXYZ( distXYZ[1], distXYZ[2], distXYZ[3]);
- }
- dumpMove( n ); //debug
-}
-
-//================================================================================
-/*!
- * \brief Remove last inflation step
- */
-//================================================================================
-
-void _LayerEdge::InvalidateStep( int curStep, bool restoreLength )
-{
- if ( _pos.size() > curStep )
- {
- if ( restoreLength )
- _len -= ( _pos[ curStep-1 ] - _pos.back() ).Modulus();
-
- _pos.resize( curStep );
- gp_Pnt nXYZ = _pos.back();
- SMDS_MeshNode* n = const_cast< SMDS_MeshNode*>( _nodes.back() );
- if ( !_sWOL.IsNull() )
- {
- TopLoc_Location loc;
- if ( _sWOL.ShapeType() == TopAbs_EDGE )
+ void Append( const BndPart& other )
{
- SMDS_EdgePosition* pos = static_cast<SMDS_EdgePosition*>( n->GetPosition() );
- pos->SetUParameter( nXYZ.X() );
- double f,l;
- Handle(Geom_Curve) curve = BRep_Tool::Curve( TopoDS::Edge( _sWOL ), loc, f,l);
- nXYZ = curve->Value( nXYZ.X() ).Transformed( loc );
+ _nbSegments += other._nbSegments;
+ bool hasCommonNode = ( _nodes.back()->GetID() == other._nodes.front()->GetID() );
+ _nodes.insert( _nodes.end(), other._nodes.begin() + hasCommonNode, other._nodes.end() );
+ _vertSWOLType[1] = other._vertSWOLType[1];
+ if ( _isShrink )
+ _vertHyp[1] = other._vertHyp[1];
}
- else
+ const SMDS_MeshNode* Node(size_t i) const
{
- SMDS_FacePosition* pos = static_cast<SMDS_FacePosition*>( n->GetPosition() );
- pos->SetUParameter( nXYZ.X() );
- pos->SetVParameter( nXYZ.Y() );
- Handle(Geom_Surface) surface = BRep_Tool::Surface( TopoDS::Face(_sWOL), loc );
- nXYZ = surface->Value( nXYZ.X(), nXYZ.Y() ).Transformed( loc );
+ return _nodes[ _isReverse ? ( _nodes.size() - 1 - i ) : i ]._node;
}
- }
- n->setXYZ( nXYZ.X(), nXYZ.Y(), nXYZ.Z() );
- dumpMove( n );
- }
-}
-
-//================================================================================
-/*!
- * \brief Create layers of prisms
- */
-//================================================================================
-
-bool _ViscousBuilder::refine(_SolidData& data)
-{
- SMESH_MesherHelper helper( *_mesh );
- helper.SetSubShape( data._solid );
- helper.SetElementsOnShape(false);
-
- Handle(Geom_Curve) curve;
- Handle(Geom_Surface) surface;
- TopoDS_Edge geomEdge;
- TopoDS_Face geomFace;
- TopoDS_Shape prevSWOL;
- TopLoc_Location loc;
- double f,l, u;
- gp_XY uv;
- bool isOnEdge;
- TGeomID prevBaseId = -1;
- TNode2Edge* n2eMap = 0;
- TNode2Edge::iterator n2e;
-
- // Create intermediate nodes on each _LayerEdge
-
- int iS = 0, iEnd = data._endEdgeOnShape[ iS ];
-
- for ( size_t i = 0; i < data._edges.size(); ++i )
- {
- _LayerEdge& edge = *data._edges[i];
+ void Reverse() { _isReverse = !_isReverse; }
+ const TopAbs_ShapeEnum& vertSWOLType1() const { return _vertSWOLType[ _isReverse ]; }
+ const TopAbs_ShapeEnum& vertSWOLType2() const { return _vertSWOLType[ !_isReverse ]; }
+ const AverageHyp& vertHyp1() const { return *(_vertHyp[ _isReverse ]); }
+ const AverageHyp& vertHyp2() const { return *(_vertHyp[ !_isReverse ]); }
+ };
+ // ................................................................................
- if ( edge._nodes.size() < 2 )
- continue; // on _noShrinkShapes
-
- // get parameters of layers for the edge
- if ( i == iEnd )
- iEnd = data._endEdgeOnShape[ ++iS ];
- const AverageHyp& hyp = data._hypOnShape[ iS ];
+ SMESH_subMesh* _subMesh;
+ _SolidData* _data1;
+ _SolidData* _data2;
+ //bool _isPeriodic;
- // get accumulated length of segments
- vector< double > segLen( edge._pos.size() );
- segLen[0] = 0.0;
- for ( size_t j = 1; j < edge._pos.size(); ++j )
- segLen[j] = segLen[j-1] + (edge._pos[j-1] - edge._pos[j] ).Modulus();
+ std::list< BndPart > _boundary;
+ int _boundarySize, _nbBoundaryParts;
- // allocate memory for new nodes if it is not yet refined
- const SMDS_MeshNode* tgtNode = edge._nodes.back();
- if ( edge._nodes.size() == 2 )
+ void Init( SMESH_subMesh* sm, _SolidData* sd1, _SolidData* sd2 )
{
- edge._nodes.resize( hyp.GetNumberLayers() + 1, 0 );
- edge._nodes[1] = 0;
- edge._nodes.back() = tgtNode;
+ _subMesh = sm; _data1 = sd1; _data2 = sd2; //_isPeriodic = false;
}
- // get data of a shrink shape
- if ( !edge._sWOL.IsNull() && edge._sWOL != prevSWOL )
+ bool IsSame( const TopoDS_Face& face ) const
{
- isOnEdge = ( edge._sWOL.ShapeType() == TopAbs_EDGE );
- if ( isOnEdge )
- {
- geomEdge = TopoDS::Edge( edge._sWOL );
- curve = BRep_Tool::Curve( geomEdge, loc, f,l);
- }
- else
- {
- geomFace = TopoDS::Face( edge._sWOL );
- surface = BRep_Tool::Surface( geomFace, loc );
- }
- prevSWOL = edge._sWOL;
+ return _subMesh->GetSubShape().IsSame( face );
}
- // restore shapePos of the last node by already treated _LayerEdge of another _SolidData
- const TGeomID baseShapeId = edge._nodes[0]->getshapeId();
- if ( baseShapeId != prevBaseId )
+ bool IsShrunk( const TopTools_MapOfShape& shrunkFaces ) const
{
- map< TGeomID, TNode2Edge* >::iterator s2ne = data._s2neMap.find( baseShapeId );
- n2eMap = ( s2ne == data._s2neMap.end() ) ? 0 : n2eMap = s2ne->second;
- prevBaseId = baseShapeId;
+ return shrunkFaces.Contains( _subMesh->GetSubShape() );
}
- _LayerEdge* edgeOnSameNode = 0;
- if ( n2eMap && (( n2e = n2eMap->find( edge._nodes[0] )) != n2eMap->end() ))
+
+ //================================================================================
+ /*!
+ * Check if meshes on two FACEs are equal
+ */
+ bool IsPeriodic( ShrinkFace& other, PeriodicFaces& periodic )
{
- edgeOnSameNode = n2e->second;
- const gp_XYZ& otherTgtPos = edgeOnSameNode->_pos.back();
- SMDS_PositionPtr lastPos = tgtNode->GetPosition();
- if ( isOnEdge )
- {
- SMDS_EdgePosition* epos = static_cast<SMDS_EdgePosition*>( lastPos );
- epos->SetUParameter( otherTgtPos.X() );
- }
- else
+ if ( !IsSameNbElements( other ))
+ return false;
+
+ this->SetBoundary();
+ other.SetBoundary();
+ if ( this->_boundarySize != other._boundarySize ||
+ this->_nbBoundaryParts != other._nbBoundaryParts )
+ return false;
+
+ for ( int isReverse = 0; isReverse < 2; ++isReverse )
{
- SMDS_FacePosition* fpos = static_cast<SMDS_FacePosition*>( lastPos );
- fpos->SetUParameter( otherTgtPos.X() );
- fpos->SetVParameter( otherTgtPos.Y() );
- }
- }
- // calculate height of the first layer
- double h0;
- const double T = segLen.back(); //data._hyp.GetTotalThickness();
- const double f = hyp.GetStretchFactor();
- const int N = hyp.GetNumberLayers();
- const double fPowN = pow( f, N );
- if ( fPowN - 1 <= numeric_limits<double>::min() )
- h0 = T / N;
- else
- h0 = T * ( f - 1 )/( fPowN - 1 );
-
- const double zeroLen = std::numeric_limits<double>::min();
-
- // create intermediate nodes
- double hSum = 0, hi = h0/f;
- size_t iSeg = 1;
- for ( size_t iStep = 1; iStep < edge._nodes.size(); ++iStep )
- {
- // compute an intermediate position
- hi *= f;
- hSum += hi;
- while ( hSum > segLen[iSeg] && iSeg < segLen.size()-1)
- ++iSeg;
- int iPrevSeg = iSeg-1;
- while ( fabs( segLen[iPrevSeg] - segLen[iSeg]) <= zeroLen && iPrevSeg > 0 )
- --iPrevSeg;
- double r = ( segLen[iSeg] - hSum ) / ( segLen[iSeg] - segLen[iPrevSeg] );
- gp_Pnt pos = r * edge._pos[iPrevSeg] + (1-r) * edge._pos[iSeg];
-
- SMDS_MeshNode*& node = const_cast< SMDS_MeshNode*& >( edge._nodes[ iStep ]);
- if ( !edge._sWOL.IsNull() )
- {
- // compute XYZ by parameters <pos>
- if ( isOnEdge )
+ if ( isReverse )
+ Reverse( _boundary );
+
+ // check boundaries
+ bool equalBoundary = false;
+ for ( int iP = 0; iP < _nbBoundaryParts && !equalBoundary; ++iP )
{
- u = pos.X();
- if ( !node )
- pos = curve->Value( u ).Transformed(loc);
+ if ( ! ( equalBoundary = ( this->_boundary == other._boundary )))
+ // set first part at end
+ _boundary.splice( _boundary.end(), _boundary, _boundary.begin() );
}
- else
- {
- uv.SetCoord( pos.X(), pos.Y() );
- if ( !node )
- pos = surface->Value( pos.X(), pos.Y() ).Transformed(loc);
+ if ( !equalBoundary )
+ continue;
+
+ // check connectivity
+ std::set<const SMDS_MeshElement*> elemsThis, elemsOther;
+ this->GetElements( elemsThis );
+ other.GetElements( elemsOther );
+ SMESH_MeshEditor::Sew_Error err =
+ SMESH_MeshEditor::FindMatchingNodes( elemsThis, elemsOther,
+ this->_boundary.front().Node(0),
+ other._boundary.front().Node(0),
+ this->_boundary.front().Node(1),
+ other._boundary.front().Node(1),
+ periodic._nnMap );
+ if ( err != SMESH_MeshEditor::SEW_OK )
+ continue;
+
+ // check node positions
+ std::vector< gp_XYZ > srcPnts, tgtPnts;
+ this->GetBoundaryPoints( srcPnts );
+ other.GetBoundaryPoints( tgtPnts );
+ if ( !periodic._trsf.Solve( srcPnts, tgtPnts )) {
+ continue;
}
- }
- // create or update the node
- if ( !node )
- {
- node = helper.AddNode( pos.X(), pos.Y(), pos.Z());
- if ( !edge._sWOL.IsNull() )
- {
- if ( isOnEdge )
- getMeshDS()->SetNodeOnEdge( node, geomEdge, u );
- else
- getMeshDS()->SetNodeOnFace( node, geomFace, uv.X(), uv.Y() );
+ double tol = std::numeric_limits<double>::max();
+ for ( size_t i = 1; i < srcPnts.size(); ++i ) {
+ tol = Min( tol, ( srcPnts[i-1] - srcPnts[i] ).SquareModulus() );
}
- else
+ tol = 0.01 * Sqrt( tol );
+ bool nodeCoincide = true;
+ TNodeNodeMap::iterator n2n = periodic._nnMap.begin();
+ for ( ; n2n != periodic._nnMap.end() && nodeCoincide; ++n2n )
{
- getMeshDS()->SetNodeInVolume( node, helper.GetSubShapeID() );
+ SMESH_NodeXYZ nSrc = n2n->first;
+ SMESH_NodeXYZ nTgt = n2n->second;
+ gp_XYZ pTgt = periodic._trsf.Transform( nSrc );
+ nodeCoincide = (( pTgt - nTgt ).SquareModulus() < tol );
}
+ if ( nodeCoincide )
+ return true;
}
- else
+ return false;
+ }
+
+ bool IsSameNbElements( ShrinkFace& other ) // check number of mesh faces
+ {
+ SMESHDS_SubMesh* sm1 = this->_subMesh->GetSubMeshDS();
+ SMESHDS_SubMesh* sm2 = other._subMesh->GetSubMeshDS();
+ return ( sm1->NbElements() == sm2->NbElements() &&
+ sm1->NbNodes() == sm2->NbNodes() );
+ }
+
+ void Reverse( std::list< BndPart >& boundary )
+ {
+ boundary.reverse();
+ for ( std::list< BndPart >::iterator part = boundary.begin(); part != boundary.end(); ++part )
+ part->Reverse();
+ }
+
+ void SetBoundary()
+ {
+ if ( !_boundary.empty() )
+ return;
+
+ TopoDS_Face F = TopoDS::Face( _subMesh->GetSubShape() );
+ if ( F.Orientation() >= TopAbs_INTERNAL ) F.Orientation( TopAbs_FORWARD );
+ std::list< TopoDS_Edge > edges;
+ std::list< int > nbEdgesInWire;
+ /*int nbWires =*/ SMESH_Block::GetOrderedEdges (F, edges, nbEdgesInWire);
+
+ // std::list< TopoDS_Edge >::iterator edgesEnd = edges.end();
+ // if ( nbWires > 1 ) {
+ // edgesEnd = edges.begin();
+ // std::advance( edgesEnd, nbEdgesInWire.front() );
+ // }
+ StdMeshers_FaceSide fSide( F, edges, _subMesh->GetFather(),
+ /*fwd=*/true, /*skipMedium=*/true );
+ _boundarySize = fSide.NbSegments();
+
+ //TopoDS_Vertex vv[2];
+ //std::list< TopoDS_Edge >::iterator edgeIt = edges.begin();
+ for ( int iE = 0; iE < nbEdgesInWire.front(); ++iE )
{
- if ( !edge._sWOL.IsNull() )
- {
- // make average pos from new and current parameters
- if ( isOnEdge )
- {
- u = 0.5 * ( u + helper.GetNodeU( geomEdge, node ));
- pos = curve->Value( u ).Transformed(loc);
+ BndPart bndPart;
+ _EdgesOnShape* eos = _data1->GetShapeEdges( fSide.EdgeID( iE ));
- SMDS_EdgePosition* epos = static_cast<SMDS_EdgePosition*>( node->GetPosition() );
- epos->SetUParameter( u );
- }
- else
- {
- uv = 0.5 * ( uv + helper.GetNodeUV( geomFace, node ));
- pos = surface->Value( uv.X(), uv.Y()).Transformed(loc);
+ bndPart._isShrink = ( eos->SWOLType() == TopAbs_FACE );
+ if ( bndPart._isShrink )
+ if (( _data1->_noShrinkShapes.count( eos->_shapeID )) ||
+ ( _data2 && _data2->_noShrinkShapes.count( eos->_shapeID )))
+ bndPart._isShrink = false;
- SMDS_FacePosition* fpos = static_cast<SMDS_FacePosition*>( node->GetPosition() );
- fpos->SetUParameter( uv.X() );
- fpos->SetVParameter( uv.Y() );
+ if ( bndPart._isShrink )
+ {
+ bndPart._hyp = & eos->_hyp;
+ _EdgesOnShape* eov[2] = { _data1->GetShapeEdges( fSide.FirstVertex( iE )),
+ _data1->GetShapeEdges( fSide.LastVertex ( iE )) };
+ for ( int iV = 0; iV < 2; ++iV )
+ {
+ bndPart._vertHyp [iV] = & eov[iV]->_hyp;
+ bndPart._vertSWOLType[iV] = eov[iV]->SWOLType();
+ if ( _data1->_noShrinkShapes.count( eov[iV]->_shapeID ))
+ bndPart._vertSWOLType[iV] = TopAbs_SHAPE;
+ if ( _data2 && bndPart._vertSWOLType[iV] != TopAbs_SHAPE )
+ {
+ eov[iV] = _data2->GetShapeEdges( iV ? fSide.LastVertex(iE) : fSide.FirstVertex(iE ));
+ if ( _data2->_noShrinkShapes.count( eov[iV]->_shapeID ))
+ bndPart._vertSWOLType[iV] = TopAbs_SHAPE;
+ else if ( eov[iV]->SWOLType() > bndPart._vertSWOLType[iV] )
+ bndPart._vertSWOLType[iV] = eov[iV]->SWOLType();
+ }
}
}
- node->setXYZ( pos.X(), pos.Y(), pos.Z() );
+ std::vector<const SMDS_MeshNode*> nodes = fSide.GetOrderedNodes( iE );
+ bndPart._nodes.assign( nodes.begin(), nodes.end() );
+ bndPart._nbSegments = bndPart._nodes.size() - 1;
+
+ if ( _boundary.empty() || ! _boundary.back().CanAppend( bndPart ))
+ _boundary.push_back( bndPart );
+ else
+ _boundary.back().Append( bndPart );
}
- } // loop on edge._nodes
- if ( !edge._sWOL.IsNull() ) // prepare for shrink()
+ _nbBoundaryParts = _boundary.size();
+ if ( _nbBoundaryParts > 1 && _boundary.front()._isShrink == _boundary.back()._isShrink )
+ {
+ _boundary.back().Append( _boundary.front() );
+ _boundary.pop_front();
+ --_nbBoundaryParts;
+ }
+ }
+
+ void GetElements( std::set<const SMDS_MeshElement*>& theElems)
{
- if ( isOnEdge )
- edge._pos.back().SetCoord( u, 0,0);
- else
- edge._pos.back().SetCoord( uv.X(), uv.Y() ,0);
+ if ( SMESHDS_SubMesh* sm = _subMesh->GetSubMeshDS() )
+ for ( SMDS_ElemIteratorPtr fIt = sm->GetElements(); fIt->more(); )
+ theElems.insert( theElems.end(), fIt->next() );
- if ( edgeOnSameNode )
- edgeOnSameNode->_pos.back() = edge._pos.back();
+ return ;
}
- } // loop on data._edges to create nodes
-
- if ( !getMeshDS()->IsEmbeddedMode() )
- // Log node movement
- for ( size_t i = 0; i < data._edges.size(); ++i )
+ void GetBoundaryPoints( std::vector< gp_XYZ >& points )
{
- _LayerEdge& edge = *data._edges[i];
- SMESH_TNodeXYZ p ( edge._nodes.back() );
- getMeshDS()->MoveNode( p._node, p.X(), p.Y(), p.Z() );
+ points.reserve( _boundarySize );
+ size_t nb = _boundary.rbegin()->_nodes.size();
+ int lastID = _boundary.rbegin()->Node( nb - 1 )->GetID();
+ std::list< BndPart >::const_iterator part = _boundary.begin();
+ for ( ; part != _boundary.end(); ++part )
+ {
+ size_t nb = part->_nodes.size();
+ size_t iF = 0;
+ size_t iR = nb - 1;
+ size_t* i = part->_isReverse ? &iR : &iF;
+ if ( part->_nodes[ *i ]->GetID() == lastID )
+ ++iF, --iR;
+ for ( ; iF < nb; ++iF, --iR )
+ points.push_back( part->_nodes[ *i ]);
+ --iF, ++iR;
+ lastID = part->_nodes[ *i ]->GetID();
+ }
}
+ }; // struct ShrinkFace
- // Create volumes
+ //--------------------------------------------------------------------------------
+ /*!
+ * \brief Periodic FACEs
+ */
+ struct Periodicity
+ {
+ std::vector< ShrinkFace > _shrinkFaces;
+ std::vector< PeriodicFaces > _periodicFaces;
- helper.SetElementsOnShape(true);
+ PeriodicFaces* GetPeriodic( const TopoDS_Face& face, const TopTools_MapOfShape& shrunkFaces )
+ {
+ for ( size_t i = 0; i < _periodicFaces.size(); ++i )
+ if ( _periodicFaces[ i ].IncludeShrunk( face, shrunkFaces ))
+ return & _periodicFaces[ i ];
+ return 0;
+ }
+ void ClearPeriodic( const TopoDS_Face& face )
+ {
+ for ( size_t i = 0; i < _periodicFaces.size(); ++i )
+ if ( _periodicFaces[ i ]._shriFace[0]->IsSame( face ) ||
+ _periodicFaces[ i ]._shriFace[1]->IsSame( face ))
+ _periodicFaces[ i ].Clear();
+ }
+ };
- vector< vector<const SMDS_MeshNode*>* > nnVec;
- set< vector<const SMDS_MeshNode*>* > nnSet;
- set< int > degenEdgeInd;
- vector<const SMDS_MeshElement*> degenVols;
+ //================================================================================
+ /*!
+ * Check if a pair includes the given FACE and the other FACE is already shrunk
+ */
+ bool PeriodicFaces::IncludeShrunk( const TopoDS_Face& face,
+ const TopTools_MapOfShape& shrunkFaces ) const
+ {
+ if ( IsEmpty() ) return false;
+ return (( _shriFace[0]->IsSame( face ) && _shriFace[1]->IsShrunk( shrunkFaces )) ||
+ ( _shriFace[1]->IsSame( face ) && _shriFace[0]->IsShrunk( shrunkFaces )));
+ }
- TopExp_Explorer exp( data._solid, TopAbs_FACE );
- for ( ; exp.More(); exp.Next() )
+ //================================================================================
+ /*!
+ * Make equal meshes on periodic faces by moving corresponding nodes
+ */
+ bool PeriodicFaces::MoveNodes( const TopoDS_Face& tgtFace )
{
- const TGeomID faceID = getMeshDS()->ShapeToIndex( exp.Current() );
- if ( data._ignoreFaceIds.count( faceID ))
- continue;
- const bool isReversedFace = data._reversedFaceIds.count( faceID );
- SMESHDS_SubMesh* fSubM = getMeshDS()->MeshElements( exp.Current() );
- SMDS_ElemIteratorPtr fIt = fSubM->GetElements();
- while ( fIt->more() )
+ int iTgt = _shriFace[1]->IsSame( tgtFace );
+ int iSrc = 1 - iTgt;
+
+ _SolidData* dataSrc = _shriFace[iSrc]->_data1;
+ _SolidData* dataTgt = _shriFace[iTgt]->_data1;
+
+ Trsf * trsf = & _trsf, trsfInverse;
+ if ( iSrc != 0 )
{
- const SMDS_MeshElement* face = fIt->next();
- const int nbNodes = face->NbCornerNodes();
- nnVec.resize( nbNodes );
- nnSet.clear();
- degenEdgeInd.clear();
- int nbZ = 0;
- SMDS_NodeIteratorPtr nIt = face->nodeIterator();
- for ( int iN = 0; iN < nbNodes; ++iN )
- {
- const SMDS_MeshNode* n = nIt->next();
- const int i = isReversedFace ? nbNodes-1-iN : iN;
- nnVec[ i ] = & data._n2eMap[ n ]->_nodes;
- if ( nnVec[ i ]->size() < 2 )
- degenEdgeInd.insert( iN );
- else
- nbZ = nnVec[ i ]->size();
+ trsfInverse = _trsf;
+ if ( !trsfInverse.Invert())
+ return false;
+ trsf = &trsfInverse;
+ }
+ SMESHDS_Mesh* meshDS = dataSrc->GetHelper().GetMeshDS();
- if ( helper.HasDegeneratedEdges() )
- nnSet.insert( nnVec[ i ]);
- }
- if ( nbZ == 0 )
- continue;
- if ( 0 < nnSet.size() && nnSet.size() < 3 )
- continue;
+ TNode2Edge::iterator n2e;
+ TNodeNodeMap::iterator n2n = _nnMap.begin();
+ for ( ; n2n != _nnMap.end(); ++n2n )
+ {
+ const SMDS_MeshNode* const* nn = & n2n->first;
+ const SMDS_MeshNode* nSrc = nn[ iSrc ];
+ const SMDS_MeshNode* nTgt = nn[ iTgt ];
- switch ( nbNodes )
+ if (( nSrc->GetPosition()->GetDim() == 2 ) ||
+ (( n2e = dataSrc->_n2eMap.find( nSrc )) == dataSrc->_n2eMap.end() ))
{
- case 3:
- switch ( degenEdgeInd.size() )
- {
- case 0: // PENTA
- {
- for ( int iZ = 1; iZ < nbZ; ++iZ )
- helper.AddVolume( (*nnVec[0])[iZ-1], (*nnVec[1])[iZ-1], (*nnVec[2])[iZ-1],
- (*nnVec[0])[iZ], (*nnVec[1])[iZ], (*nnVec[2])[iZ]);
+ SMESH_NodeXYZ pSrc = nSrc;
+ gp_XYZ pTgt = trsf->Transform( pSrc );
+ meshDS->MoveNode( nTgt, pTgt.X(), pTgt.Y(), pTgt.Z() );
+ }
+ else
+ {
+ _LayerEdge* leSrc = n2e->second;
+ n2e = dataTgt->_n2eMap.find( nTgt );
+ if ( n2e == dataTgt->_n2eMap.end() )
break;
- }
- case 1: // PYRAM
- {
- int i2 = *degenEdgeInd.begin();
- int i0 = helper.WrapIndex( i2 - 1, nbNodes );
- int i1 = helper.WrapIndex( i2 + 1, nbNodes );
- for ( int iZ = 1; iZ < nbZ; ++iZ )
- helper.AddVolume( (*nnVec[i0])[iZ-1], (*nnVec[i1])[iZ-1],
- (*nnVec[i1])[iZ], (*nnVec[i0])[iZ], (*nnVec[i2])[0]);
+ _LayerEdge* leTgt = n2e->second;
+ if ( leSrc->_nodes.size() != leTgt->_nodes.size() )
break;
- }
- case 2: // TETRA
+ for ( size_t iN = 1; iN < leSrc->_nodes.size(); ++iN )
{
- int i3 = !degenEdgeInd.count(0) ? 0 : !degenEdgeInd.count(1) ? 1 : 2;
- for ( int iZ = 1; iZ < nbZ; ++iZ )
- helper.AddVolume( (*nnVec[0])[iZ-1], (*nnVec[1])[iZ-1], (*nnVec[2])[iZ-1],
- (*nnVec[i3])[iZ]);
- break;
- }
+ SMESH_NodeXYZ pSrc = leSrc->_nodes[ iN ];
+ gp_XYZ pTgt = trsf->Transform( pSrc );
+ meshDS->MoveNode( leTgt->_nodes[ iN ], pTgt.X(), pTgt.Y(), pTgt.Z() );
}
- break;
+ }
+ }
+ bool done = ( n2n == _nnMap.end() );
+ debugMsg( "PeriodicFaces::MoveNodes "
+ << _shriFace[iSrc]->_subMesh->GetId() << " -> "
+ << _shriFace[iTgt]->_subMesh->GetId() << " -- "
+ << ( done ? "DONE" : "FAIL"));
- case 4:
- switch ( degenEdgeInd.size() )
- {
- case 0: // HEX
- {
- for ( int iZ = 1; iZ < nbZ; ++iZ )
- helper.AddVolume( (*nnVec[0])[iZ-1], (*nnVec[1])[iZ-1],
- (*nnVec[2])[iZ-1], (*nnVec[3])[iZ-1],
- (*nnVec[0])[iZ], (*nnVec[1])[iZ],
- (*nnVec[2])[iZ], (*nnVec[3])[iZ]);
- break;
- }
- case 2: // PENTA?
- {
- int i2 = *degenEdgeInd.begin();
- int i3 = *degenEdgeInd.rbegin();
- bool ok = ( i3 - i2 == 1 );
- if ( i2 == 0 && i3 == 3 ) { i2 = 3; i3 = 0; ok = true; }
- int i0 = helper.WrapIndex( i3 + 1, nbNodes );
- int i1 = helper.WrapIndex( i0 + 1, nbNodes );
- for ( int iZ = 1; iZ < nbZ; ++iZ )
- {
- const SMDS_MeshElement* vol =
- helper.AddVolume( (*nnVec[i3])[0], (*nnVec[i0])[iZ], (*nnVec[i0])[iZ-1],
- (*nnVec[i2])[0], (*nnVec[i1])[iZ], (*nnVec[i1])[iZ-1]);
- if ( !ok && vol )
- degenVols.push_back( vol );
- }
- break;
- }
- case 3: // degen HEX
- {
- const SMDS_MeshNode* nn[8];
- for ( int iZ = 1; iZ < nbZ; ++iZ )
- {
- const SMDS_MeshElement* vol =
- helper.AddVolume( nnVec[0]->size() > 1 ? (*nnVec[0])[iZ-1] : (*nnVec[0])[0],
- nnVec[1]->size() > 1 ? (*nnVec[1])[iZ-1] : (*nnVec[1])[0],
- nnVec[2]->size() > 1 ? (*nnVec[2])[iZ-1] : (*nnVec[2])[0],
- nnVec[3]->size() > 1 ? (*nnVec[3])[iZ-1] : (*nnVec[3])[0],
- nnVec[0]->size() > 1 ? (*nnVec[0])[iZ] : (*nnVec[0])[0],
- nnVec[1]->size() > 1 ? (*nnVec[1])[iZ] : (*nnVec[1])[0],
- nnVec[2]->size() > 1 ? (*nnVec[2])[iZ] : (*nnVec[2])[0],
- nnVec[3]->size() > 1 ? (*nnVec[3])[iZ] : (*nnVec[3])[0]);
- degenVols.push_back( vol );
- }
- }
- break;
- }
- break;
+ return done;
+ }
+} // namespace VISCOUS_3D; Periodicity part
- default:
- return error("Not supported type of element", data._index);
- } // switch ( nbNodes )
- } // while ( fIt->more() )
- } // loop on FACEs
+//================================================================================
+/*!
+ * \brief Find FACEs to shrink, that are equally meshed before shrink (i.e. periodic)
+ * and should remain equal after shrink
+ */
+//================================================================================
- if ( !degenVols.empty() )
+void _ViscousBuilder::findPeriodicFaces()
+{
+ // make map of (ids of FACEs to shrink mesh on) to (list of _SolidData containing
+ // _LayerEdge's inflated along FACE or EDGE)
+ std::map< TGeomID, std::list< _SolidData* > > id2sdMap;
+ for ( size_t i = 0 ; i < _sdVec.size(); ++i )
{
- SMESH_ComputeErrorPtr& err = _mesh->GetSubMesh( data._solid )->GetComputeError();
- if ( !err || err->IsOK() )
- {
- err.reset( new SMESH_ComputeError( COMPERR_WARNING,
- "Degenerated volumes created" ));
- err->myBadElements.insert( err->myBadElements.end(),
- degenVols.begin(),degenVols.end() );
- }
+ _SolidData& data = _sdVec[i];
+ std::map< TGeomID, TopoDS_Shape >::iterator s2s = data._shrinkShape2Shape.begin();
+ for (; s2s != data._shrinkShape2Shape.end(); ++s2s )
+ if ( s2s->second.ShapeType() == TopAbs_FACE )
+ id2sdMap[ getMeshDS()->ShapeToIndex( s2s->second )].push_back( &data );
}
- return true;
+ _periodicity.reset( new Periodicity );
+ _periodicity->_shrinkFaces.resize( id2sdMap.size() );
+
+ std::map< TGeomID, std::list< _SolidData* > >::iterator id2sdIt = id2sdMap.begin();
+ for ( size_t i = 0; i < id2sdMap.size(); ++i, ++id2sdIt )
+ {
+ _SolidData* sd1 = id2sdIt->second.front();
+ _SolidData* sd2 = id2sdIt->second.back();
+ _periodicity->_shrinkFaces[ i ].Init( _mesh->GetSubMeshContaining( id2sdIt->first ), sd1, sd2 );
+ }
+
+ for ( size_t i1 = 0; i1 < _periodicity->_shrinkFaces.size(); ++i1 )
+ for ( size_t i2 = i1 + 1; i2 < _periodicity->_shrinkFaces.size(); ++i2 )
+ {
+ PeriodicFaces pf( & _periodicity->_shrinkFaces[ i1 ],
+ & _periodicity->_shrinkFaces[ i2 ]);
+ if ( pf._shriFace[0]->IsPeriodic( *pf._shriFace[1], pf ))
+ {
+ _periodicity->_periodicFaces.push_back( pf );
+ }
+ }
+ return;
}
//================================================================================
*/
//================================================================================
-bool _ViscousBuilder::shrink()
+bool _ViscousBuilder::shrink(_SolidData& theData)
{
- // make map of (ids of FACEs to shrink mesh on) to (_SolidData containing _LayerEdge's
- // inflated along FACE or EDGE)
- map< TGeomID, _SolidData* > f2sdMap;
+ // make map of (ids of FACEs to shrink mesh on) to (list of _SolidData containing
+ // _LayerEdge's inflated along FACE or EDGE)
+ map< TGeomID, list< _SolidData* > > f2sdMap;
for ( size_t i = 0 ; i < _sdVec.size(); ++i )
{
_SolidData& data = _sdVec[i];
- TopTools_MapOfShape FFMap;
map< TGeomID, TopoDS_Shape >::iterator s2s = data._shrinkShape2Shape.begin();
for (; s2s != data._shrinkShape2Shape.end(); ++s2s )
- if ( s2s->second.ShapeType() == TopAbs_FACE )
+ if ( s2s->second.ShapeType() == TopAbs_FACE && !_shrunkFaces.Contains( s2s->second ))
{
- f2sdMap.insert( make_pair( getMeshDS()->ShapeToIndex( s2s->second ), &data ));
+ f2sdMap[ getMeshDS()->ShapeToIndex( s2s->second )].push_back( &data );
- if ( FFMap.Add( (*s2s).second ))
- // Put mesh faces on the shrinked FACE to the proxy sub-mesh to avoid
- // usage of mesh faces made in addBoundaryElements() by the 3D algo or
- // by StdMeshers_QuadToTriaAdaptor
- if ( SMESHDS_SubMesh* smDS = getMeshDS()->MeshElements( s2s->second ))
+ // Put mesh faces on the shrunk FACE to the proxy sub-mesh to avoid
+ // usage of mesh faces made in addBoundaryElements() by the 3D algo or
+ // by StdMeshers_QuadToTriaAdaptor
+ if ( SMESHDS_SubMesh* smDS = getMeshDS()->MeshElements( s2s->second ))
+ {
+ SMESH_ProxyMesh::SubMesh* proxySub =
+ data._proxyMesh->getFaceSubM( TopoDS::Face( s2s->second ), /*create=*/true);
+ if ( proxySub->NbElements() == 0 )
{
- SMESH_ProxyMesh::SubMesh* proxySub =
- data._proxyMesh->getFaceSubM( TopoDS::Face( s2s->second ), /*create=*/true);
SMDS_ElemIteratorPtr fIt = smDS->GetElements();
while ( fIt->more() )
- proxySub->AddElement( fIt->next() );
- // as a result 3D algo will use elements from proxySub and not from smDS
+ {
+ const SMDS_MeshElement* f = fIt->next();
+ // as a result 3D algo will use elements from proxySub and not from smDS
+ proxySub->AddElement( f );
+ f->setIsMarked( true );
+
+ // Mark nodes on the FACE to discriminate them from nodes
+ // added by addBoundaryElements(); marked nodes are to be smoothed while shrink()
+ for ( int iN = 0, nbN = f->NbNodes(); iN < nbN; ++iN )
+ {
+ const SMDS_MeshNode* n = f->GetNode( iN );
+ if ( n->GetPosition()->GetDim() == 2 )
+ n->setIsMarked( true );
+ }
+ }
}
+ }
}
}
SMESH_MesherHelper helper( *_mesh );
helper.ToFixNodeParameters( true );
- // EDGE's to shrink
+ // EDGEs to shrink
map< TGeomID, _Shrinker1D > e2shrMap;
+ vector< _EdgesOnShape* > subEOS;
vector< _LayerEdge* > lEdges;
- // loop on FACES to srink mesh on
- map< TGeomID, _SolidData* >::iterator f2sd = f2sdMap.begin();
+ // loop on FACEs to shrink mesh on
+ map< TGeomID, list< _SolidData* > >::iterator f2sd = f2sdMap.begin();
for ( ; f2sd != f2sdMap.end(); ++f2sd )
{
- _SolidData& data = *f2sd->second;
+ list< _SolidData* > & dataList = f2sd->second;
+ if ( dataList.front()->_n2eMap.empty() ||
+ dataList.back() ->_n2eMap.empty() )
+ continue; // not yet computed
+ if ( dataList.front() != &theData &&
+ dataList.back() != &theData )
+ continue;
+
+ _SolidData& data = *dataList.front();
+ _SolidData* data2 = dataList.size() > 1 ? dataList.back() : 0;
const TopoDS_Face& F = TopoDS::Face( getMeshDS()->IndexToShape( f2sd->first ));
SMESH_subMesh* sm = _mesh->GetSubMesh( F );
SMESHDS_SubMesh* smDS = sm->GetSubMeshDS();
- Handle(Geom_Surface) surface = BRep_Tool::Surface(F);
+ Handle(Geom_Surface) surface = BRep_Tool::Surface( F );
+
+ _shrunkFaces.Add( F );
+ helper.SetSubShape( F );
+
+ // ==============================
+ // Use periodicity to move nodes
+ // ==============================
- helper.SetSubShape(F);
+ PeriodicFaces* periodic = _periodicity->GetPeriodic( F, _shrunkFaces );
+ bool movedByPeriod = ( periodic && periodic->MoveNodes( F ));
// ===========================
// Prepare data for shrinking
// ===========================
- // Collect nodes to smooth, as src nodes are not yet replaced by tgt ones
- // and thus all nodes on a FACE connected to 2d elements are to be smoothed
+ // Collect nodes to smooth (they are marked at the beginning of this method)
vector < const SMDS_MeshNode* > smoothNodes;
+
+ if ( !movedByPeriod )
{
SMDS_NodeIteratorPtr nIt = smDS->GetNodes();
while ( nIt->more() )
{
const SMDS_MeshNode* n = nIt->next();
- if ( n->NbInverseElements( SMDSAbs_Face ) > 0 )
+ if ( n->isMarked() )
smoothNodes.push_back( n );
}
}
{
vector<_Simplex> simplices;
_Simplex::GetSimplices( smoothNodes[0], simplices, ignoreShapes );
- helper.GetNodeUV( F, simplices[0]._nPrev, 0, &isOkUV ); // fix UV of silpmex nodes
+ helper.GetNodeUV( F, simplices[0]._nPrev, 0, &isOkUV ); // fix UV of simplex nodes
helper.GetNodeUV( F, simplices[0]._nNext, 0, &isOkUV );
gp_XY uv = helper.GetNodeUV( F, smoothNodes[0], 0, &isOkUV );
- if ( !simplices[0].IsForward(uv, smoothNodes[0], F, helper,refSign) )
+ if ( !simplices[0].IsForward(uv, smoothNodes[0], F, helper, refSign ))
refSign = -1;
}
// Find _LayerEdge's inflated along F
+ subEOS.clear();
lEdges.clear();
{
- set< TGeomID > subIDs;
- SMESH_subMeshIteratorPtr subIt = sm->getDependsOnIterator(/*includeSelf=*/false);
+ SMESH_subMeshIteratorPtr subIt = sm->getDependsOnIterator(/*includeSelf=*/false,
+ /*complexFirst=*/true); //!!!
while ( subIt->more() )
- subIDs.insert( subIt->next()->GetId() );
-
- int iBeg, iEnd = 0;
- for ( int iS = 0; iS < data._endEdgeOnShape.size() && !subIDs.empty(); ++iS )
{
- iBeg = iEnd;
- iEnd = data._endEdgeOnShape[ iS ];
- TGeomID shapeID = data._edges[ iBeg ]->_nodes[0]->getshapeId();
- set< TGeomID >::iterator idIt = subIDs.find( shapeID );
- if ( idIt == subIDs.end() ||
- data._edges[ iBeg ]->_sWOL.IsNull() ) continue;
- subIDs.erase( idIt );
+ const TGeomID subID = subIt->next()->GetId();
+ if ( data._noShrinkShapes.count( subID ))
+ continue;
+ _EdgesOnShape* eos = data.GetShapeEdges( subID );
+ if ( !eos || eos->_sWOL.IsNull() )
+ if ( data2 ) // check in adjacent SOLID
+ {
+ eos = data2->GetShapeEdges( subID );
+ if ( !eos || eos->_sWOL.IsNull() )
+ continue;
+ }
+ subEOS.push_back( eos );
- if ( !data._noShrinkShapes.count( shapeID ))
- for ( ; iBeg < iEnd; ++iBeg )
+ if ( !movedByPeriod )
+ for ( size_t i = 0; i < eos->_edges.size(); ++i )
{
- lEdges.push_back( data._edges[ iBeg ] );
- prepareEdgeToShrink( *data._edges[ iBeg ], F, helper, smDS );
+ lEdges.push_back( eos->_edges[ i ] );
+ prepareEdgeToShrink( *eos->_edges[ i ], *eos, helper, smDS );
}
}
}
// Replace source nodes by target nodes in mesh faces to shrink
dumpFunction(SMESH_Comment("replNodesOnFace")<<f2sd->first); // debug
const SMDS_MeshNode* nodes[20];
- for ( size_t i = 0; i < lEdges.size(); ++i )
+ for ( size_t iS = 0; iS < subEOS.size(); ++iS )
{
- _LayerEdge& edge = *lEdges[i];
- const SMDS_MeshNode* srcNode = edge._nodes[0];
- const SMDS_MeshNode* tgtNode = edge._nodes.back();
- SMDS_ElemIteratorPtr fIt = srcNode->GetInverseElementIterator(SMDSAbs_Face);
- while ( fIt->more() )
+ _EdgesOnShape& eos = * subEOS[ iS ];
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
{
- const SMDS_MeshElement* f = fIt->next();
- if ( !smDS->Contains( f ))
- continue;
- SMDS_NodeIteratorPtr nIt = f->nodeIterator();
- for ( int iN = 0; nIt->more(); ++iN )
+ _LayerEdge& edge = *eos._edges[i];
+ const SMDS_MeshNode* srcNode = edge._nodes[0];
+ const SMDS_MeshNode* tgtNode = edge._nodes.back();
+ SMDS_ElemIteratorPtr fIt = srcNode->GetInverseElementIterator(SMDSAbs_Face);
+ while ( fIt->more() )
{
- const SMDS_MeshNode* n = nIt->next();
- nodes[iN] = ( n == srcNode ? tgtNode : n );
+ const SMDS_MeshElement* f = fIt->next();
+ if ( !smDS->Contains( f ) || !f->isMarked() )
+ continue;
+ SMDS_NodeIteratorPtr nIt = f->nodeIterator();
+ for ( int iN = 0; nIt->more(); ++iN )
+ {
+ const SMDS_MeshNode* n = nIt->next();
+ nodes[iN] = ( n == srcNode ? tgtNode : n );
+ }
+ helper.GetMeshDS()->ChangeElementNodes( f, nodes, f->NbNodes() );
+ dumpChangeNodes( f );
}
- helper.GetMeshDS()->ChangeElementNodes( f, nodes, f->NbNodes() );
- dumpChangeNodes( f );
}
}
dumpFunctionEnd();
{
const SMDS_MeshNode* n = smoothNodes[i];
nodesToSmooth[ i ]._node = n;
- // src nodes must be replaced by tgt nodes to have tgt nodes in _simplices
+ // src nodes must be already replaced by tgt nodes to have tgt nodes in _simplices
_Simplex::GetSimplices( n, nodesToSmooth[ i ]._simplices, ignoreShapes, 0, sortSimplices);
// fix up incorrect uv of nodes on the FACE
helper.GetNodeUV( F, n, 0, &isOkUV);
// Find EDGE's to shrink and set simpices to LayerEdge's
set< _Shrinker1D* > eShri1D;
{
- for ( size_t i = 0; i < lEdges.size(); ++i )
+ for ( size_t iS = 0; iS < subEOS.size(); ++iS )
{
- _LayerEdge* edge = lEdges[i];
- if ( edge->_sWOL.ShapeType() == TopAbs_EDGE )
+ _EdgesOnShape& eos = * subEOS[ iS ];
+ if ( eos.SWOLType() == TopAbs_EDGE )
+ {
+ SMESH_subMesh* edgeSM = _mesh->GetSubMesh( eos._sWOL );
+ VISCOUS_3D::ToClearSubWithMain( edgeSM, data._solid );
+ if ( !movedByPeriod )
+ {
+ _Shrinker1D& shrinker = e2shrMap[ edgeSM->GetId() ];
+ eShri1D.insert( & shrinker );
+ shrinker.AddEdge( eos._edges[0], eos, helper );
+ // restore params of nodes on EDGE if the EDGE has been already
+ // shrunk while shrinking other FACE
+ shrinker.RestoreParams();
+ }
+ }
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
{
- TGeomID edgeIndex = getMeshDS()->ShapeToIndex( edge->_sWOL );
- _Shrinker1D& srinker = e2shrMap[ edgeIndex ];
- eShri1D.insert( & srinker );
- srinker.AddEdge( edge, helper );
- VISCOUS_3D::ToClearSubWithMain( _mesh->GetSubMesh( edge->_sWOL ), data._solid );
- // restore params of nodes on EGDE if the EDGE has been already
- // srinked while srinking another FACE
- srinker.RestoreParams();
+ _LayerEdge& edge = * eos._edges[i];
+ _Simplex::GetSimplices( /*tgtNode=*/edge._nodes.back(), edge._simplices, ignoreShapes );
+
+ // additionally mark tgt node; only marked nodes will be used in SetNewLength2d()
+ // not-marked nodes are those added by refine()
+ edge._nodes.back()->setIsMarked( true );
}
- _Simplex::GetSimplices( /*tgtNode=*/edge->_nodes.back(), edge->_simplices, ignoreShapes );
}
}
bool toFixTria = false; // to improve quality of trias by diagonal swap
- if ( isConcaveFace )
+ if ( isConcaveFace && !movedByPeriod )
{
const bool hasTria = _mesh->NbTriangles(), hasQuad = _mesh->NbQuadrangles();
if ( hasTria != hasQuad ) {
// Perform shrinking
// ==================
- bool shrinked = true;
- int badNb, shriStep=0, smooStep=0;
+ bool shrunk = !movedByPeriod;
+ int nbBad, shriStep=0, smooStep=0;
_SmoothNode::SmoothType smoothType
= isConcaveFace ? _SmoothNode::ANGULAR : _SmoothNode::LAPLACIAN;
- while ( shrinked )
+ SMESH_Comment errMsg;
+ while ( shrunk )
{
shriStep++;
// Move boundary nodes (actually just set new UV)
// -----------------------------------------------
dumpFunction(SMESH_Comment("moveBoundaryOnF")<<f2sd->first<<"_st"<<shriStep ); // debug
- shrinked = false;
- for ( size_t i = 0; i < lEdges.size(); ++i )
+ shrunk = false;
+ for ( size_t iS = 0; iS < subEOS.size(); ++iS )
{
- shrinked |= lEdges[i]->SetNewLength2d( surface,F,helper );
+ _EdgesOnShape& eos = * subEOS[ iS ];
+ for ( size_t i = 0; i < eos._edges.size(); ++i )
+ {
+ shrunk |= eos._edges[i]->SetNewLength2d( surface, F, eos, helper );
+ }
}
dumpFunctionEnd();
// -----------------
int nbNoImpSteps = 0;
bool moved = true;
- badNb = 1;
- while (( nbNoImpSteps < 5 && badNb > 0) && moved)
+ nbBad = 1;
+ while (( nbNoImpSteps < 5 && nbBad > 0) && moved)
{
dumpFunction(SMESH_Comment("shrinkFace")<<f2sd->first<<"_st"<<++smooStep); // debug
- int oldBadNb = badNb;
- badNb = 0;
+ int oldBadNb = nbBad;
+ nbBad = 0;
moved = false;
+ // '% 5' minimizes NB FUNCTIONS on viscous_layers_00/B2 case
+ _SmoothNode::SmoothType smooTy = ( smooStep % 5 ) ? smoothType : _SmoothNode::LAPLACIAN;
for ( size_t i = 0; i < nodesToSmooth.size(); ++i )
{
- moved |= nodesToSmooth[i].Smooth( badNb,surface,helper,refSign,
- smoothType, /*set3D=*/isConcaveFace);
+ moved |= nodesToSmooth[i].Smooth( nbBad, surface, helper, refSign,
+ smooTy, /*set3D=*/isConcaveFace);
}
- if ( badNb < oldBadNb )
+ if ( nbBad < oldBadNb )
nbNoImpSteps = 0;
else
nbNoImpSteps++;
dumpFunctionEnd();
}
- if ( badNb > 0 )
- return error(SMESH_Comment("Can't shrink 2D mesh on face ") << f2sd->first );
+
+ errMsg.clear();
+ if ( nbBad > 0 )
+ errMsg << "Can't shrink 2D mesh on face " << f2sd->first;
if ( shriStep > 200 )
- return error(SMESH_Comment("Infinite loop at shrinking 2D mesh on face ") << f2sd->first );
+ errMsg << "Infinite loop at shrinking 2D mesh on face " << f2sd->first;
+ if ( !errMsg.empty() )
+ break;
// Fix narrow triangles by swapping diagonals
// ---------------------------------------
// dumpFunction(SMESH_Comment("shrinkFace")<<f2sd->first<<"_st"<<++smooStep); // debug
// for ( size_t i = 0; i < nodesToSmooth.size(); ++i )
// {
- // nodesToSmooth[i].Smooth( badNb,surface,helper,refSign,
+ // nodesToSmooth[i].Smooth( nbBad,surface,helper,refSign,
// _SmoothNode::LAPLACIAN,/*set3D=*/false);
// }
// }
- } // while ( shrinked )
- // No wrongly shaped faces remain; final smooth. Set node XYZ.
- bool isStructuredFixed = false;
- if ( SMESH_2D_Algo* algo = dynamic_cast<SMESH_2D_Algo*>( sm->GetAlgo() ))
- isStructuredFixed = algo->FixInternalNodes( *data._proxyMesh, F );
- if ( !isStructuredFixed )
+ } // while ( shrunk )
+
+ if ( !errMsg.empty() ) // Try to re-compute the shrink FACE
{
- if ( isConcaveFace ) // fix narrow faces by swapping diagonals
- fixBadFaces( F, helper, /*is2D=*/false, ++shriStep );
+ debugMsg( "Re-compute FACE " << f2sd->first << " because " << errMsg );
- for ( int st = 3; st; --st )
+ // remove faces
+ SMESHDS_SubMesh* psm = data._proxyMesh->getFaceSubM( F );
{
- switch( st ) {
- case 1: smoothType = _SmoothNode::LAPLACIAN; break;
- case 2: smoothType = _SmoothNode::LAPLACIAN; break;
- case 3: smoothType = _SmoothNode::ANGULAR; break;
+ vector< const SMDS_MeshElement* > facesToRm;
+ if ( psm )
+ {
+ facesToRm.reserve( psm->NbElements() );
+ for ( SMDS_ElemIteratorPtr ite = psm->GetElements(); ite->more(); )
+ facesToRm.push_back( ite->next() );
+
+ for ( size_t i = 0 ; i < _sdVec.size(); ++i )
+ if (( psm = _sdVec[i]._proxyMesh->getFaceSubM( F )))
+ psm->Clear();
}
- dumpFunction(SMESH_Comment("shrinkFace")<<f2sd->first<<"_st"<<++smooStep); // debug
- for ( size_t i = 0; i < nodesToSmooth.size(); ++i )
+ for ( size_t i = 0; i < facesToRm.size(); ++i )
+ getMeshDS()->RemoveFreeElement( facesToRm[i], smDS, /*fromGroups=*/false );
+ }
+ // remove nodes
+ {
+ TIDSortedNodeSet nodesToKeep; // nodes of _LayerEdge to keep
+ for ( size_t iS = 0; iS < subEOS.size(); ++iS ) {
+ for ( size_t i = 0; i < subEOS[iS]->_edges.size(); ++i )
+ nodesToKeep.insert( ++( subEOS[iS]->_edges[i]->_nodes.begin() ),
+ subEOS[iS]->_edges[i]->_nodes.end() );
+ }
+ SMDS_NodeIteratorPtr itn = smDS->GetNodes();
+ while ( itn->more() ) {
+ const SMDS_MeshNode* n = itn->next();
+ if ( !nodesToKeep.count( n ))
+ getMeshDS()->RemoveFreeNode( n, smDS, /*fromGroups=*/false );
+ }
+ }
+ _periodicity->ClearPeriodic( F );
+
+ // restore position and UV of target nodes
+ gp_Pnt p;
+ for ( size_t iS = 0; iS < subEOS.size(); ++iS )
+ for ( size_t i = 0; i < subEOS[iS]->_edges.size(); ++i )
+ {
+ _LayerEdge* edge = subEOS[iS]->_edges[i];
+ SMDS_MeshNode* tgtNode = const_cast< SMDS_MeshNode*& >( edge->_nodes.back() );
+ if ( edge->_pos.empty() ||
+ edge->Is( _LayerEdge::SHRUNK )) continue;
+ if ( subEOS[iS]->SWOLType() == TopAbs_FACE )
+ {
+ SMDS_FacePositionPtr pos = tgtNode->GetPosition();
+ pos->SetUParameter( edge->_pos[0].X() );
+ pos->SetVParameter( edge->_pos[0].Y() );
+ p = surface->Value( edge->_pos[0].X(), edge->_pos[0].Y() );
+ }
+ else
+ {
+ SMDS_EdgePositionPtr pos = tgtNode->GetPosition();
+ pos->SetUParameter( edge->_pos[0].Coord( U_TGT ));
+ p = BRepAdaptor_Curve( TopoDS::Edge( subEOS[iS]->_sWOL )).Value( pos->GetUParameter() );
+ }
+ tgtNode->setXYZ( p.X(), p.Y(), p.Z() );
+ dumpMove( tgtNode );
+ }
+ // shrink EDGE sub-meshes and set proxy sub-meshes
+ UVPtStructVec uvPtVec;
+ set< _Shrinker1D* >::iterator shrIt = eShri1D.begin();
+ for ( shrIt = eShri1D.begin(); shrIt != eShri1D.end(); ++shrIt )
+ {
+ _Shrinker1D* shr = (*shrIt);
+ shr->Compute( /*set3D=*/true, helper );
+
+ // set proxy mesh of EDGEs w/o layers
+ map< double, const SMDS_MeshNode* > nodes;
+ SMESH_Algo::GetSortedNodesOnEdge( getMeshDS(), shr->GeomEdge(),/*skipMedium=*/true, nodes);
+ // remove refinement nodes
+ const SMDS_MeshNode* sn0 = shr->SrcNode(0), *sn1 = shr->SrcNode(1);
+ const SMDS_MeshNode* tn0 = shr->TgtNode(0), *tn1 = shr->TgtNode(1);
+ map< double, const SMDS_MeshNode* >::iterator u2n = nodes.begin();
+ if ( u2n->second == sn0 || u2n->second == sn1 )
{
- nodesToSmooth[i].Smooth( badNb,surface,helper,refSign,
- smoothType,/*set3D=*/st==1 );
+ while ( u2n->second != tn0 && u2n->second != tn1 )
+ ++u2n;
+ nodes.erase( nodes.begin(), u2n );
}
- dumpFunctionEnd();
+ u2n = --nodes.end();
+ if ( u2n->second == sn0 || u2n->second == sn1 )
+ {
+ while ( u2n->second != tn0 && u2n->second != tn1 )
+ --u2n;
+ nodes.erase( ++u2n, nodes.end() );
+ }
+ // set proxy sub-mesh
+ uvPtVec.resize( nodes.size() );
+ u2n = nodes.begin();
+ BRepAdaptor_Curve2d curve( shr->GeomEdge(), F );
+ for ( size_t i = 0; i < nodes.size(); ++i, ++u2n )
+ {
+ uvPtVec[ i ].node = u2n->second;
+ uvPtVec[ i ].param = u2n->first;
+ uvPtVec[ i ].SetUV( curve.Value( u2n->first ).XY() );
+ }
+ StdMeshers_FaceSide fSide( uvPtVec, F, shr->GeomEdge(), _mesh );
+ StdMeshers_ViscousLayers2D::SetProxyMeshOfEdge( fSide );
}
- }
- // Set an event listener to clear FACE sub-mesh together with SOLID sub-mesh
- VISCOUS_3D::ToClearSubWithMain( sm, data._solid );
- if ( !getMeshDS()->IsEmbeddedMode() )
- // Log node movement
- for ( size_t i = 0; i < nodesToSmooth.size(); ++i )
+ // set proxy mesh of EDGEs with layers
+ vector< _LayerEdge* > edges;
+ for ( size_t iS = 0; iS < subEOS.size(); ++iS )
+ {
+ _EdgesOnShape& eos = * subEOS[ iS ];
+ if ( eos.ShapeType() != TopAbs_EDGE ) continue;
+
+ const TopoDS_Edge& E = TopoDS::Edge( eos._shape );
+ data.SortOnEdge( E, eos._edges );
+
+ edges.clear();
+ if ( _EdgesOnShape* eov = data.GetShapeEdges( helper.IthVertex( 0, E, /*CumOri=*/false )))
+ if ( !eov->_edges.empty() )
+ edges.push_back( eov->_edges[0] ); // on 1st VERTEX
+
+ edges.insert( edges.end(), eos._edges.begin(), eos._edges.end() );
+
+ if ( _EdgesOnShape* eov = data.GetShapeEdges( helper.IthVertex( 1, E, /*CumOri=*/false )))
+ if ( !eov->_edges.empty() )
+ edges.push_back( eov->_edges[0] ); // on last VERTEX
+
+ uvPtVec.resize( edges.size() );
+ for ( size_t i = 0; i < edges.size(); ++i )
+ {
+ uvPtVec[ i ].node = edges[i]->_nodes.back();
+ uvPtVec[ i ].param = helper.GetNodeU( E, edges[i]->_nodes[0] );
+ uvPtVec[ i ].SetUV( helper.GetNodeUV( F, edges[i]->_nodes.back() ));
+ }
+ BRep_Tool::Range( E, uvPtVec[0].param, uvPtVec.back().param );
+ StdMeshers_FaceSide fSide( uvPtVec, F, E, _mesh );
+ StdMeshers_ViscousLayers2D::SetProxyMeshOfEdge( fSide );
+ }
+ // temporary clear the FACE sub-mesh from faces made by refine()
+ vector< const SMDS_MeshElement* > elems;
+ elems.reserve( smDS->NbElements() + smDS->NbNodes() );
+ for ( SMDS_ElemIteratorPtr ite = smDS->GetElements(); ite->more(); )
+ elems.push_back( ite->next() );
+ for ( SMDS_NodeIteratorPtr ite = smDS->GetNodes(); ite->more(); )
+ elems.push_back( ite->next() );
+ smDS->Clear();
+
+ // compute the mesh on the FACE
+ sm->ComputeStateEngine( SMESH_subMesh::CHECK_COMPUTE_STATE );
+ sm->ComputeStateEngine( SMESH_subMesh::COMPUTE_SUBMESH );
+
+ // re-fill proxy sub-meshes of the FACE
+ for ( size_t i = 0 ; i < _sdVec.size(); ++i )
+ if (( psm = _sdVec[i]._proxyMesh->getFaceSubM( F )))
+ for ( SMDS_ElemIteratorPtr ite = smDS->GetElements(); ite->more(); )
+ psm->AddElement( ite->next() );
+
+ // re-fill smDS
+ for ( size_t i = 0; i < elems.size(); ++i )
+ smDS->AddElement( elems[i] );
+
+ if ( sm->GetComputeState() != SMESH_subMesh::COMPUTE_OK )
+ return error( errMsg );
+
+ } // end of re-meshing in case of failed smoothing
+ else if ( !movedByPeriod )
+ {
+ // No wrongly shaped faces remain; final smooth. Set node XYZ.
+ bool isStructuredFixed = false;
+ if ( SMESH_2D_Algo* algo = dynamic_cast<SMESH_2D_Algo*>( sm->GetAlgo() ))
+ isStructuredFixed = algo->FixInternalNodes( *data._proxyMesh, F );
+ if ( !isStructuredFixed )
{
- SMESH_TNodeXYZ p ( nodesToSmooth[i]._node );
- getMeshDS()->MoveNode( nodesToSmooth[i]._node, p.X(), p.Y(), p.Z() );
+ if ( isConcaveFace ) // fix narrow faces by swapping diagonals
+ fixBadFaces( F, helper, /*is2D=*/false, ++shriStep );
+
+ for ( int st = 3; st; --st )
+ {
+ switch( st ) {
+ case 1: smoothType = _SmoothNode::LAPLACIAN; break;
+ case 2: smoothType = _SmoothNode::LAPLACIAN; break;
+ case 3: smoothType = _SmoothNode::ANGULAR; break;
+ }
+ dumpFunction(SMESH_Comment("shrinkFace")<<f2sd->first<<"_st"<<++smooStep); // debug
+ for ( size_t i = 0; i < nodesToSmooth.size(); ++i )
+ {
+ nodesToSmooth[i].Smooth( nbBad,surface,helper,refSign,
+ smoothType,/*set3D=*/st==1 );
+ }
+ dumpFunctionEnd();
+ }
}
+ if ( !getMeshDS()->IsEmbeddedMode() )
+ // Log node movement
+ for ( size_t i = 0; i < nodesToSmooth.size(); ++i )
+ {
+ SMESH_TNodeXYZ p ( nodesToSmooth[i]._node );
+ getMeshDS()->MoveNode( nodesToSmooth[i]._node, p.X(), p.Y(), p.Z() );
+ }
+ }
+
+ // Set an event listener to clear FACE sub-mesh together with SOLID sub-mesh
+ VISCOUS_3D::ToClearSubWithMain( sm, data._solid );
+ if ( data2 )
+ VISCOUS_3D::ToClearSubWithMain( sm, data2->_solid );
- } // loop on FACES to srink mesh on
+ } // loop on FACES to shrink mesh on
- // Replace source nodes by target nodes in shrinked mesh edges
+ // Replace source nodes by target nodes in shrunk mesh edges
map< int, _Shrinker1D >::iterator e2shr = e2shrMap.begin();
for ( ; e2shr != e2shrMap.end(); ++e2shr )
//================================================================================
bool _ViscousBuilder::prepareEdgeToShrink( _LayerEdge& edge,
- const TopoDS_Face& F,
+ _EdgesOnShape& eos,
SMESH_MesherHelper& helper,
- const SMESHDS_SubMesh* faceSubMesh)
+ const SMESHDS_SubMesh* /*faceSubMesh*/)
{
const SMDS_MeshNode* srcNode = edge._nodes[0];
const SMDS_MeshNode* tgtNode = edge._nodes.back();
- if ( edge._sWOL.ShapeType() == TopAbs_FACE )
+ if ( eos.SWOLType() == TopAbs_FACE )
{
- gp_XY srcUV( edge._pos[0].X(), edge._pos[0].Y() );//helper.GetNodeUV( F, srcNode );
- gp_XY tgtUV = edge.LastUV( F ); //helper.GetNodeUV( F, tgtNode );
+ if ( tgtNode->GetPosition()->GetDim() != 2 ) // not inflated edge
+ {
+ edge._pos.clear();
+ edge.Set( _LayerEdge::SHRUNK );
+ return srcNode == tgtNode;
+ }
+ gp_XY srcUV ( edge._pos[0].X(), edge._pos[0].Y() ); //helper.GetNodeUV( F, srcNode );
+ gp_XY tgtUV = edge.LastUV( TopoDS::Face( eos._sWOL ), eos ); //helper.GetNodeUV( F, tgtNode );
gp_Vec2d uvDir( srcUV, tgtUV );
double uvLen = uvDir.Magnitude();
uvDir /= uvLen;
edge._normal.SetCoord( uvDir.X(),uvDir.Y(), 0 );
edge._len = uvLen;
- edge._pos.resize(1);
+ //edge._pos.resize(1);
edge._pos[0].SetCoord( tgtUV.X(), tgtUV.Y(), 0 );
// set UV of source node to target node
- SMDS_FacePosition* pos = static_cast<SMDS_FacePosition*>( tgtNode->GetPosition() );
+ SMDS_FacePositionPtr pos = tgtNode->GetPosition();
pos->SetUParameter( srcUV.X() );
pos->SetVParameter( srcUV.Y() );
}
else // _sWOL is TopAbs_EDGE
{
- const TopoDS_Edge& E = TopoDS::Edge( edge._sWOL );
+ if ( tgtNode->GetPosition()->GetDim() != 1 ) // not inflated edge
+ {
+ edge._pos.clear();
+ edge.Set( _LayerEdge::SHRUNK );
+ return srcNode == tgtNode;
+ }
+ const TopoDS_Edge& E = TopoDS::Edge( eos._sWOL );
SMESHDS_SubMesh* edgeSM = getMeshDS()->MeshElements( E );
if ( !edgeSM || edgeSM->NbElements() == 0 )
return error(SMESH_Comment("Not meshed EDGE ") << getMeshDS()->ShapeToIndex( E ));
if ( !n2 )
return error(SMESH_Comment("Wrongly meshed EDGE ") << getMeshDS()->ShapeToIndex( E ));
+ if ( n2 == tgtNode ) // for 3D_mesh_GHS3D_01/B1
+ {
+ // shrunk by other SOLID
+ edge.Set( _LayerEdge::SHRUNK ); // ???
+ return true;
+ }
+
double uSrc = helper.GetNodeU( E, srcNode, n2 );
double uTgt = helper.GetNodeU( E, tgtNode, srcNode );
- double u2 = helper.GetNodeU( E, n2, srcNode );
+ double u2 = helper.GetNodeU( E, n2, srcNode );
- edge._pos.clear();
+ //edge._pos.clear();
if ( fabs( uSrc-uTgt ) < 0.99 * fabs( uSrc-u2 ))
{
// tgtNode is located so that it does not make faces with wrong orientation
+ edge.Set( _LayerEdge::SHRUNK );
return true;
}
- edge._pos.resize(1);
+ //edge._pos.resize(1);
edge._pos[0].SetCoord( U_TGT, uTgt );
edge._pos[0].SetCoord( U_SRC, uSrc );
edge._pos[0].SetCoord( LEN_TGT, fabs( uSrc-uTgt ));
edge._simplices[0]._nPrev = n2;
// set U of source node to the target node
- SMDS_EdgePosition* pos = static_cast<SMDS_EdgePosition*>( tgtNode->GetPosition() );
+ SMDS_EdgePositionPtr pos = tgtNode->GetPosition();
pos->SetUParameter( uSrc );
}
return true;
TopLoc_Location loc;
Handle(Geom_Curve) curve = BRep_Tool::Curve( TopoDS::Edge( S ), loc, f, l );
if ( curve.IsNull() ) return;
- SMDS_EdgePosition* ePos = static_cast<SMDS_EdgePosition*>( srcNode->GetPosition() );
+ SMDS_EdgePositionPtr ePos = srcNode->GetPosition();
p = curve->Value( ePos->GetUParameter() );
break;
}
//================================================================================
/*!
- * \brief Try to fix triangles with high aspect ratio by swaping diagonals
+ * \brief Try to fix triangles with high aspect ratio by swapping diagonals
*/
//================================================================================
*/
//================================================================================
-bool _LayerEdge::SetNewLength2d( Handle(Geom_Surface)& surface,
+bool _LayerEdge::SetNewLength2d( Handle(Geom_Surface)& /*surface*/,
const TopoDS_Face& F,
+ _EdgesOnShape& eos,
SMESH_MesherHelper& helper )
{
- if ( _pos.empty() )
+ if ( Is( SHRUNK ))
return false; // already at the target position
SMDS_MeshNode* tgtNode = const_cast< SMDS_MeshNode*& >( _nodes.back() );
- if ( _sWOL.ShapeType() == TopAbs_FACE )
+ if ( eos.SWOLType() == TopAbs_FACE )
{
gp_XY curUV = helper.GetNodeUV( F, tgtNode );
gp_Pnt2d tgtUV( _pos[0].X(), _pos[0].Y() );
double stepSize = 1e100;
for ( size_t i = 0; i < _simplices.size(); ++i )
{
+ if ( !_simplices[i]._nPrev->isMarked() ||
+ !_simplices[i]._nNext->isMarked() )
+ continue; // simplex of quadrangle created by addBoundaryElements()
+
// find intersection of 2 lines: curUV-tgtUV and that connecting simplex nodes
gp_XY uvN1 = helper.GetNodeUV( F, _simplices[i]._nPrev );
gp_XY uvN2 = helper.GetNodeUV( F, _simplices[i]._nNext );
if ( uvLen <= stepSize )
{
newUV = tgtUV;
- _pos.clear();
+ Set( SHRUNK );
+ //_pos.clear();
}
else if ( stepSize > 0 )
{
{
return true;
}
- SMDS_FacePosition* pos = static_cast<SMDS_FacePosition*>( tgtNode->GetPosition() );
+ SMDS_FacePositionPtr pos = tgtNode->GetPosition();
pos->SetUParameter( newUV.X() );
pos->SetVParameter( newUV.Y() );
}
else // _sWOL is TopAbs_EDGE
{
- const TopoDS_Edge& E = TopoDS::Edge( _sWOL );
+ const TopoDS_Edge& E = TopoDS::Edge( eos._sWOL );
const SMDS_MeshNode* n2 = _simplices[0]._nPrev;
- SMDS_EdgePosition* tgtPos = static_cast<SMDS_EdgePosition*>( tgtNode->GetPosition() );
+ SMDS_EdgePositionPtr tgtPos = tgtNode->GetPosition();
const double u2 = helper.GetNodeU( E, n2, tgtNode );
const double uSrc = _pos[0].Coord( U_SRC );
double newU = _pos[0].Coord( U_TGT );
if ( lenTgt < 0.99 * fabs( uSrc-u2 )) // n2 got out of src-tgt range
{
- _pos.clear();
+ Set( _LayerEdge::SHRUNK );
+ //_pos.clear();
}
else
{
dumpMove( tgtNode );
#endif
}
+
return true;
}
*/
//================================================================================
-bool _SmoothNode::Smooth(int& badNb,
+bool _SmoothNode::Smooth(int& nbBad,
Handle(Geom_Surface)& surface,
SMESH_MesherHelper& helper,
const double refSign,
if ( nbOkAfter < nbOkBefore )
{
- badNb += _simplices.size() - nbOkBefore;
+ nbBad += _simplices.size() - nbOkBefore;
return false;
}
- SMDS_FacePosition* pos = static_cast<SMDS_FacePosition*>( _node->GetPosition() );
+ SMDS_FacePositionPtr pos = _node->GetPosition();
pos->SetUParameter( newPos.X() );
pos->SetVParameter( newPos.Y() );
dumpMove( _node );
}
- badNb += _simplices.size() - nbOkAfter;
+ nbBad += _simplices.size() - nbOkAfter;
return ( (tgtUV-newPos).SquareModulus() > 1e-10 );
}
//================================================================================
/*!
- * \brief Computes new UV using angle based smoothing technic
+ * \brief Computes new UV using angle based smoothing technique
*/
//================================================================================
//================================================================================
/*!
- * \brief Delete _SolidData
- */
-//================================================================================
-
-_SolidData::~_SolidData()
-{
- for ( size_t i = 0; i < _edges.size(); ++i )
- {
- if ( _edges[i] && _edges[i]->_2neibors )
- delete _edges[i]->_2neibors;
- delete _edges[i];
- }
- _edges.clear();
-}
-//================================================================================
-/*!
- * \brief Add a _LayerEdge inflated along the EDGE
+ * \brief Keep a _LayerEdge inflated along the EDGE
*/
//================================================================================
-void _Shrinker1D::AddEdge( const _LayerEdge* e, SMESH_MesherHelper& helper )
+void _Shrinker1D::AddEdge( const _LayerEdge* e,
+ _EdgesOnShape& eos,
+ SMESH_MesherHelper& helper )
{
// init
if ( _nodes.empty() )
_done = false;
}
// check _LayerEdge
- if ( e == _edges[0] || e == _edges[1] )
+ if ( e == _edges[0] || e == _edges[1] || e->_nodes.size() < 2 )
return;
- if ( e->_sWOL.IsNull() || e->_sWOL.ShapeType() != TopAbs_EDGE )
+ if ( eos.SWOLType() != TopAbs_EDGE )
throw SALOME_Exception(LOCALIZED("Wrong _LayerEdge is added"));
- if ( _edges[0] && _edges[0]->_sWOL != e->_sWOL )
+ if ( _edges[0] && !_geomEdge.IsSame( eos._sWOL ))
throw SALOME_Exception(LOCALIZED("Wrong _LayerEdge is added"));
// store _LayerEdge
- const TopoDS_Edge& E = TopoDS::Edge( e->_sWOL );
+ _geomEdge = TopoDS::Edge( eos._sWOL );
double f,l;
- BRep_Tool::Range( E, f,l );
- double u = helper.GetNodeU( E, e->_nodes[0], e->_nodes.back());
+ BRep_Tool::Range( _geomEdge, f,l );
+ double u = helper.GetNodeU( _geomEdge, e->_nodes[0], e->_nodes.back());
_edges[ u < 0.5*(f+l) ? 0 : 1 ] = e;
// Update _nodes
- const SMDS_MeshNode* tgtNode0 = _edges[0] ? _edges[0]->_nodes.back() : 0;
- const SMDS_MeshNode* tgtNode1 = _edges[1] ? _edges[1]->_nodes.back() : 0;
+ const SMDS_MeshNode* tgtNode0 = TgtNode( 0 );
+ const SMDS_MeshNode* tgtNode1 = TgtNode( 1 );
if ( _nodes.empty() )
{
- SMESHDS_SubMesh * eSubMesh = helper.GetMeshDS()->MeshElements( E );
+ SMESHDS_SubMesh * eSubMesh = helper.GetMeshDS()->MeshElements( _geomEdge );
if ( !eSubMesh || eSubMesh->NbNodes() < 1 )
return;
TopLoc_Location loc;
- Handle(Geom_Curve) C = BRep_Tool::Curve(E, loc, f,l);
+ Handle(Geom_Curve) C = BRep_Tool::Curve( _geomEdge, loc, f,l );
GeomAdaptor_Curve aCurve(C, f,l);
const double totLen = GCPnts_AbscissaPoint::Length(aCurve, f, l);
while ( nIt->more() )
{
const SMDS_MeshNode* node = nIt->next();
+
+ // skip refinement nodes
if ( node->NbInverseElements(SMDSAbs_Edge) == 0 ||
node == tgtNode0 || node == tgtNode1 )
- continue; // refinement nodes
+ continue;
+ bool hasMarkedFace = false;
+ SMDS_ElemIteratorPtr fIt = node->GetInverseElementIterator(SMDSAbs_Face);
+ while ( fIt->more() && !hasMarkedFace )
+ hasMarkedFace = fIt->next()->isMarked();
+ if ( !hasMarkedFace )
+ continue;
+
_nodes.push_back( node );
- _initU.push_back( helper.GetNodeU( E, node ));
+ _initU.push_back( helper.GetNodeU( _geomEdge, node ));
double len = GCPnts_AbscissaPoint::Length(aCurve, f, _initU.back());
_normPar.push_back( len / totLen );
}
else
{
// remove target node of the _LayerEdge from _nodes
- int nbFound = 0;
+ size_t nbFound = 0;
for ( size_t i = 0; i < _nodes.size(); ++i )
if ( !_nodes[i] || _nodes[i] == tgtNode0 || _nodes[i] == tgtNode1 )
_nodes[i] = 0, nbFound++;
if ( !e ) e = _edges[1];
if ( !e ) return;
- _done = (( !_edges[0] || _edges[0]->_pos.empty() ) &&
- ( !_edges[1] || _edges[1]->_pos.empty() ));
+ _done = (( !_edges[0] || _edges[0]->Is( _LayerEdge::SHRUNK )) &&
+ ( !_edges[1] || _edges[1]->Is( _LayerEdge::SHRUNK )));
- const TopoDS_Edge& E = TopoDS::Edge( e->_sWOL );
double f,l;
if ( set3D || _done )
{
- Handle(Geom_Curve) C = BRep_Tool::Curve(E, f,l);
+ Handle(Geom_Curve) C = BRep_Tool::Curve(_geomEdge, f,l);
GeomAdaptor_Curve aCurve(C, f,l);
if ( _edges[0] )
- f = helper.GetNodeU( E, _edges[0]->_nodes.back(), _nodes[0] );
+ f = helper.GetNodeU( _geomEdge, _edges[0]->_nodes.back(), _nodes[0] );
if ( _edges[1] )
- l = helper.GetNodeU( E, _edges[1]->_nodes.back(), _nodes.back() );
+ l = helper.GetNodeU( _geomEdge, _edges[1]->_nodes.back(), _nodes.back() );
double totLen = GCPnts_AbscissaPoint::Length( aCurve, f, l );
for ( size_t i = 0; i < _nodes.size(); ++i )
if ( !discret.IsDone() )
return throw SALOME_Exception(LOCALIZED("GCPnts_AbscissaPoint failed"));
double u = discret.Parameter();
- SMDS_EdgePosition* pos = static_cast<SMDS_EdgePosition*>( _nodes[i]->GetPosition() );
+ SMDS_EdgePositionPtr pos = _nodes[i]->GetPosition();
pos->SetUParameter( u );
gp_Pnt p = C->Value( u );
const_cast< SMDS_MeshNode*>( _nodes[i] )->setXYZ( p.X(), p.Y(), p.Z() );
}
else
{
- BRep_Tool::Range( E, f,l );
+ BRep_Tool::Range( _geomEdge, f,l );
if ( _edges[0] )
- f = helper.GetNodeU( E, _edges[0]->_nodes.back(), _nodes[0] );
+ f = helper.GetNodeU( _geomEdge, _edges[0]->_nodes.back(), _nodes[0] );
if ( _edges[1] )
- l = helper.GetNodeU( E, _edges[1]->_nodes.back(), _nodes.back() );
+ l = helper.GetNodeU( _geomEdge, _edges[1]->_nodes.back(), _nodes.back() );
for ( size_t i = 0; i < _nodes.size(); ++i )
{
if ( !_nodes[i] ) continue;
double u = f * ( 1-_normPar[i] ) + l * _normPar[i];
- SMDS_EdgePosition* pos = static_cast<SMDS_EdgePosition*>( _nodes[i]->GetPosition() );
+ SMDS_EdgePositionPtr pos = _nodes[i]->GetPosition();
pos->SetUParameter( u );
}
}
for ( size_t i = 0; i < _nodes.size(); ++i )
{
if ( !_nodes[i] ) continue;
- SMDS_EdgePosition* pos = static_cast<SMDS_EdgePosition*>( _nodes[i]->GetPosition() );
+ SMDS_EdgePositionPtr pos = _nodes[i]->GetPosition();
pos->SetUParameter( _initU[i] );
}
_done = false;
//================================================================================
/*!
- * \brief Replace source nodes by target nodes in shrinked mesh edges
+ * \brief Replace source nodes by target nodes in shrunk mesh edges
*/
//================================================================================
{
if ( !_edges[i] ) continue;
- SMESHDS_SubMesh * eSubMesh = mesh->MeshElements( _edges[i]->_sWOL );
+ SMESHDS_SubMesh * eSubMesh = mesh->MeshElements( _geomEdge );
if ( !eSubMesh ) return;
const SMDS_MeshNode* srcNode = _edges[i]->_nodes[0];
const SMDS_MeshNode* tgtNode = _edges[i]->_nodes.back();
+ const SMDS_MeshNode* scdNode = _edges[i]->_nodes[1];
SMDS_ElemIteratorPtr eIt = srcNode->GetInverseElementIterator(SMDSAbs_Edge);
while ( eIt->more() )
{
const SMDS_MeshElement* e = eIt->next();
- if ( !eSubMesh->Contains( e ))
+ if ( !eSubMesh->Contains( e ) || e->GetNodeIndex( scdNode ) >= 0 )
continue;
SMDS_ElemIteratorPtr nIt = e->nodesIterator();
for ( int iN = 0; iN < e->NbNodes(); ++iN )
*/
//================================================================================
-bool _ViscousBuilder::addBoundaryElements()
+bool _ViscousBuilder::addBoundaryElements(_SolidData& data)
{
SMESH_MesherHelper helper( *_mesh );
vector< const SMDS_MeshNode* > faceNodes;
- for ( size_t i = 0; i < _sdVec.size(); ++i )
+ //for ( size_t i = 0; i < _sdVec.size(); ++i )
{
- _SolidData& data = _sdVec[i];
+ //_SolidData& data = _sdVec[i];
TopTools_IndexedMapOfShape geomEdges;
TopExp::MapShapes( data._solid, TopAbs_EDGE, geomEdges );
for ( int iE = 1; iE <= geomEdges.Extent(); ++iE )
{
const TopoDS_Edge& E = TopoDS::Edge( geomEdges(iE));
- if ( data._noShrinkShapes.count( getMeshDS()->ShapeToIndex( E )))
+ const TGeomID edgeID = getMeshDS()->ShapeToIndex( E );
+ if ( data._noShrinkShapes.count( edgeID ))
continue;
// Get _LayerEdge's based on E
const SMDS_MeshNode* tgtN0 = ledges[0]->_nodes.back();
const SMDS_MeshNode* tgtN1 = ledges[1]->_nodes.back();
int nbSharedPyram = 0;
- SMDS_ElemIteratorPtr vIt = tgtN0->GetInverseElementIterator(SMDSAbs_Volume);
+ SMDS_ElemIteratorPtr vIt = tgtN1->GetInverseElementIterator(SMDSAbs_Volume);
while ( vIt->more() )
{
const SMDS_MeshElement* v = vIt->next();
- nbSharedPyram += int( v->GetNodeIndex( tgtN1 ) >= 0 );
+ nbSharedPyram += int( v->GetNodeIndex( tgtN0 ) >= 0 );
}
if ( nbSharedPyram > 1 )
continue; // not free border of the pyramid
// Find out orientation and type of face to create
bool reverse = false, isOnFace;
-
- map< TGeomID, TopoDS_Shape >::iterator e2f =
- data._shrinkShape2Shape.find( getMeshDS()->ShapeToIndex( E ));
TopoDS_Shape F;
+
+ map< TGeomID, TopoDS_Shape >::iterator e2f = data._shrinkShape2Shape.find( edgeID );
if (( isOnFace = ( e2f != data._shrinkShape2Shape.end() )))
{
F = e2f->second.Oriented( TopAbs_FORWARD );
if ( helper.IsReversedSubMesh( TopoDS::Face(F) ))
reverse = !reverse;
}
- else
+ else if ( !data._ignoreFaceIds.count( e2f->first ))
{
// find FACE with layers sharing E
- PShapeIteratorPtr fIt = helper.GetAncestors( E, *_mesh, TopAbs_FACE );
- while ( fIt->more() && F.IsNull() )
- {
- const TopoDS_Shape* pF = fIt->next();
- if ( helper.IsSubShape( *pF, data._solid) &&
- !data._ignoreFaceIds.count( e2f->first ))
- F = *pF;
- }
+ PShapeIteratorPtr fIt = helper.GetAncestors( E, *_mesh, TopAbs_FACE, &data._solid );
+ if ( fIt->more() )
+ F = *( fIt->next() );
}
// Find the sub-mesh to add new faces
SMESHDS_SubMesh* sm = 0;
if ( !sm )
return error("error in addBoundaryElements()", data._index);
+ // Find a proxy sub-mesh of the FACE of an adjacent SOLID, which will use the new boundary
+ // faces for 3D meshing (PAL23414)
+ SMESHDS_SubMesh* adjSM = 0;
+ if ( isOnFace )
+ {
+ const TGeomID faceID = sm->GetID();
+ PShapeIteratorPtr soIt = helper.GetAncestors( F, *_mesh, TopAbs_SOLID );
+ while ( const TopoDS_Shape* solid = soIt->next() )
+ if ( !solid->IsSame( data._solid ))
+ {
+ size_t iData = _solids.FindIndex( *solid ) - 1;
+ if ( iData < _sdVec.size() &&
+ _sdVec[ iData ]._ignoreFaceIds.count( faceID ) &&
+ _sdVec[ iData ]._shrinkShape2Shape.count( edgeID ) == 0 )
+ {
+ SMESH_ProxyMesh::SubMesh* proxySub =
+ _sdVec[ iData ]._proxyMesh->getFaceSubM( TopoDS::Face( F ), /*create=*/false);
+ if ( proxySub && proxySub->NbElements() > 0 )
+ adjSM = proxySub;
+ }
+ }
+ }
+
// Make faces
const int dj1 = reverse ? 0 : 1;
const int dj2 = reverse ? 1 : 0;
+ vector< const SMDS_MeshElement*> ff; // new faces row
+ SMESHDS_Mesh* m = getMeshDS();
for ( size_t j = 1; j < ledges.size(); ++j )
{
vector< const SMDS_MeshNode*>& nn1 = ledges[j-dj1]->_nodes;
vector< const SMDS_MeshNode*>& nn2 = ledges[j-dj2]->_nodes;
+ ff.resize( std::max( nn1.size(), nn2.size() ), NULL );
if ( nn1.size() == nn2.size() )
{
if ( isOnFace )
for ( size_t z = 1; z < nn1.size(); ++z )
- sm->AddElement( getMeshDS()->AddFace( nn1[z-1], nn2[z-1], nn2[z], nn1[z] ));
+ sm->AddElement( ff[z-1] = m->AddFace( nn1[z-1], nn2[z-1], nn2[z], nn1[z] ));
else
for ( size_t z = 1; z < nn1.size(); ++z )
sm->AddElement( new SMDS_FaceOfNodes( nn1[z-1], nn2[z-1], nn2[z], nn1[z] ));
{
if ( isOnFace )
for ( size_t z = 1; z < nn2.size(); ++z )
- sm->AddElement( getMeshDS()->AddFace( nn1[0], nn2[z-1], nn2[z] ));
+ sm->AddElement( ff[z-1] = m->AddFace( nn1[0], nn2[z-1], nn2[z] ));
else
for ( size_t z = 1; z < nn2.size(); ++z )
sm->AddElement( new SMDS_FaceOfNodes( nn1[0], nn2[z-1], nn2[z] ));
{
if ( isOnFace )
for ( size_t z = 1; z < nn1.size(); ++z )
- sm->AddElement( getMeshDS()->AddFace( nn1[z-1], nn2[0], nn1[z] ));
+ sm->AddElement( ff[z-1] = m->AddFace( nn1[z-1], nn2[0], nn1[z] ));
else
for ( size_t z = 1; z < nn1.size(); ++z )
sm->AddElement( new SMDS_FaceOfNodes( nn1[z-1], nn2[0], nn2[z] ));
}
+
+ if ( adjSM ) // add faces to a proxy SM of the adjacent SOLID
+ {
+ for ( size_t z = 0; z < ff.size(); ++z )
+ if ( ff[ z ])
+ adjSM->AddElement( ff[ z ]);
+ ff.clear();
+ }
}
// Make edges
for ( int isFirst = 0; isFirst < 2; ++isFirst )
{
_LayerEdge* edge = isFirst ? ledges.front() : ledges.back();
- if ( !edge->_sWOL.IsNull() && edge->_sWOL.ShapeType() == TopAbs_EDGE )
+ _EdgesOnShape* eos = data.GetShapeEdges( edge );
+ if ( eos && eos->SWOLType() == TopAbs_EDGE )
{
vector< const SMDS_MeshNode*>& nn = edge->_nodes;
- if ( nn.size() < 2 || nn[1]->GetInverseElementIterator( SMDSAbs_Edge )->more() )
+ if ( nn.size() < 2 || nn[1]->NbInverseElements( SMDSAbs_Edge ) >= 2 )
continue;
- helper.SetSubShape( edge->_sWOL );
+ helper.SetSubShape( eos->_sWOL );
helper.SetElementsOnShape( true );
for ( size_t z = 1; z < nn.size(); ++z )
helper.AddEdge( nn[z-1], nn[z] );
}
}
- }
- }
+
+ } // loop on EDGE's
+ } // loop on _SolidData's
return true;
}