-// Copyright (C) 2007-2015 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2020 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
#include "StdMeshers_QuadFromMedialAxis_1D2D.hxx"
+#include "SMESHDS_Mesh.hxx"
#include "SMESH_Block.hxx"
#include "SMESH_Gen.hxx"
#include "SMESH_MAT2d.hxx"
#include "SMESH_MesherHelper.hxx"
#include "SMESH_ProxyMesh.hxx"
#include "SMESH_subMesh.hxx"
+#include "SMESH_subMeshEventListener.hxx"
#include "StdMeshers_FaceSide.hxx"
+#include "StdMeshers_LayerDistribution.hxx"
+#include "StdMeshers_NumberOfLayers.hxx"
#include "StdMeshers_Regular_1D.hxx"
#include "StdMeshers_ViscousLayers2D.hxx"
+#include <BRepAdaptor_Curve.hxx>
#include <BRepBuilderAPI_MakeEdge.hxx>
#include <BRepTools.hxx>
#include <BRep_Tool.hxx>
#include <Precision.hxx>
#include <TColgp_HArray1OfPnt.hxx>
#include <TopExp.hxx>
+#include <TopExp_Explorer.hxx>
#include <TopLoc_Location.hxx>
#include <TopTools_MapOfShape.hxx>
#include <TopoDS.hxx>
#include <list>
#include <vector>
+using namespace std;
+
//================================================================================
/*!
* \brief 1D algo
class StdMeshers_QuadFromMedialAxis_1D2D::Algo1D : public StdMeshers_Regular_1D
{
public:
- Algo1D(int studyId, SMESH_Gen* gen):
- StdMeshers_Regular_1D( gen->GetANewId(), studyId, gen )
+ Algo1D(SMESH_Gen* gen):
+ StdMeshers_Regular_1D( gen->GetANewId(), gen )
{
}
void SetSegmentLength( double len )
{
+ SMESH_Algo::_usedHypList.clear();
_value[ BEG_LENGTH_IND ] = len;
_value[ PRECISION_IND ] = 1e-7;
_hypType = LOCAL_LENGTH;
}
+ void SetRadialDistribution( const SMESHDS_Hypothesis* hyp )
+ {
+ SMESH_Algo::_usedHypList.clear();
+ if ( !hyp )
+ return;
+
+ if ( const StdMeshers_NumberOfLayers* nl =
+ dynamic_cast< const StdMeshers_NumberOfLayers* >( hyp ))
+ {
+ _ivalue[ NB_SEGMENTS_IND ] = nl->GetNumberOfLayers();
+ _ivalue[ DISTR_TYPE_IND ] = 0;
+ _hypType = NB_SEGMENTS;
+ }
+ if ( const StdMeshers_LayerDistribution* ld =
+ dynamic_cast< const StdMeshers_LayerDistribution* >( hyp ))
+ {
+ if ( SMESH_Hypothesis* h = ld->GetLayerDistribution() )
+ {
+ SMESH_Algo::_usedHypList.clear();
+ SMESH_Algo::_usedHypList.push_back( h );
+ }
+ }
+ }
+ void ComputeDistribution(SMESH_MesherHelper& theHelper,
+ const gp_Pnt& thePnt1,
+ const gp_Pnt& thePnt2,
+ list< double >& theParams)
+ {
+ SMESH_Mesh& mesh = *theHelper.GetMesh();
+ TopoDS_Edge edge = BRepBuilderAPI_MakeEdge( thePnt1, thePnt2 );
+
+ SMESH_Hypothesis::Hypothesis_Status aStatus;
+ CheckHypothesis( mesh, edge, aStatus );
+
+ theParams.clear();
+ BRepAdaptor_Curve C3D(edge);
+ double f = C3D.FirstParameter(), l = C3D.LastParameter(), len = thePnt1.Distance( thePnt2 );
+ if ( !StdMeshers_Regular_1D::computeInternalParameters( mesh, C3D, len, f, l, theParams, false))
+ {
+ for ( size_t i = 1; i < 15; ++i )
+ theParams.push_back( i/15. ); // ????
+ }
+ else
+ {
+ for (list<double>::iterator itU = theParams.begin(); itU != theParams.end(); ++itU )
+ *itU /= len;
+ }
+ }
+ virtual const list <const SMESHDS_Hypothesis *> &
+ GetUsedHypothesis(SMESH_Mesh &, const TopoDS_Shape &, const bool)
+ {
+ return SMESH_Algo::_usedHypList;
+ }
+ virtual bool CheckHypothesis(SMESH_Mesh& aMesh,
+ const TopoDS_Shape& aShape,
+ SMESH_Hypothesis::Hypothesis_Status& aStatus)
+ {
+ if ( !SMESH_Algo::_usedHypList.empty() )
+ return StdMeshers_Regular_1D::CheckHypothesis( aMesh, aShape, aStatus );
+ return true;
+ }
};
//================================================================================
//================================================================================
StdMeshers_QuadFromMedialAxis_1D2D::StdMeshers_QuadFromMedialAxis_1D2D(int hypId,
- int studyId,
SMESH_Gen* gen)
- : StdMeshers_Quadrangle_2D(hypId, studyId, gen),
+ : StdMeshers_Quadrangle_2D(hypId, gen),
_regular1D( 0 )
{
_name = "QuadFromMedialAxis_1D2D";
_shapeType = (1 << TopAbs_FACE);
_onlyUnaryInput = true; // FACE by FACE so far
_requireDiscreteBoundary = false; // make 1D by myself
- _supportSubmeshes = true; // make 1D by myself
+ _supportSubmeshes = true; // make 1D by myself
_neededLowerHyps[ 1 ] = true; // suppress warning on hiding a global 1D algo
_neededLowerHyps[ 2 ] = true; // suppress warning on hiding a global 2D algo
_compatibleHypothesis.clear();
_compatibleHypothesis.push_back("ViscousLayers2D");
+ _compatibleHypothesis.push_back("LayerDistribution2D");
+ _compatibleHypothesis.push_back("NumberOfLayers2D");
}
//================================================================================
Hypothesis_Status& aStatus)
{
aStatus = HYP_OK;
+
+ // get one main optional hypothesis
+ const list <const SMESHDS_Hypothesis * >& hyps = GetUsedHypothesis(aMesh, aShape);
+ _hyp2D = hyps.empty() ? 0 : hyps.front();
+
return true; // does not require hypothesis
}
_quad->face = f;
}
const TopoDS_Face& Face() const { return _quad->face; }
+ bool IsRing() const { return _shortSide[0].empty() && !_sinuSide[0].empty(); }
};
//================================================================================
}
};
+ //================================================================================
+ /*!
+ * \brief Event listener which removes mesh from EDGEs when 2D hyps change
+ */
+ struct EdgeCleaner : public SMESH_subMeshEventListener
+ {
+ int _prevAlgoEvent;
+ EdgeCleaner():
+ SMESH_subMeshEventListener( /*isDeletable=*/true,
+ "StdMeshers_QuadFromMedialAxis_1D2D::EdgeCleaner")
+ {
+ _prevAlgoEvent = -1;
+ }
+ virtual void ProcessEvent(const int event,
+ const int eventType,
+ SMESH_subMesh* faceSubMesh,
+ SMESH_subMeshEventListenerData* /*data*/,
+ const SMESH_Hypothesis* /*hyp*/)
+ {
+ if ( eventType == SMESH_subMesh::ALGO_EVENT )
+ {
+ _prevAlgoEvent = event;
+ return;
+ }
+ // SMESH_subMesh::COMPUTE_EVENT
+ if ( _prevAlgoEvent == SMESH_subMesh::REMOVE_HYP ||
+ _prevAlgoEvent == SMESH_subMesh::REMOVE_ALGO ||
+ _prevAlgoEvent == SMESH_subMesh::MODIF_HYP )
+ {
+ SMESH_subMeshIteratorPtr smIt = faceSubMesh->getDependsOnIterator(/*includeSelf=*/false);
+ while ( smIt->more() )
+ smIt->next()->ComputeStateEngine( SMESH_subMesh::CLEAN );
+ }
+ _prevAlgoEvent = -1;
+ }
+ };
+
//================================================================================
/*!
* \brief Return a member of a std::pair
algos[i] = sm->GetAlgo();
}
- const int nbSegDflt = mesh->GetGen()->GetDefaultNbSegments();
- double minSegLen = Precision::Infinite();
+ int nbSegDflt = mesh->GetGen() ? mesh->GetGen()->GetDefaultNbSegments() : 15;
+ double minSegLen = Precision::Infinite();
for ( size_t i = 0; i < theEdges.size(); ++i )
{
tmpMesh.ShapeToMesh( TopoDS_Shape());
tmpMesh.ShapeToMesh( theEdges[i] );
try {
- mesh->GetGen()->Compute( tmpMesh, theEdges[i], true, true ); // make nodes on VERTEXes
+ if ( !mesh->GetGen() ) continue; // tmp mesh
+ mesh->GetGen()->Compute( tmpMesh, theEdges[i], SMESH_Gen::SHAPE_ONLY_UPWARD ); // make nodes on VERTEXes
if ( !algo->Compute( tmpMesh, theEdges[i] ))
continue;
}
size_t nbOutEdges = theSinuFace._nbEdgesInWire.front();
theSinuEdges[0].assign ( allEdges.begin(), allEdges.begin() + nbOutEdges );
theSinuEdges[1].assign ( allEdges.begin() + nbOutEdges, allEdges.end() );
+ theSinuFace._sinuEdges = allEdges;
return true;
}
if ( theSinuFace._nbWires > 2 )
allEdges, theShortEdges[ nbBranchPoints > 0 ] ))
return false;
- for ( size_t iS = 0; iS < theShortEdges[ nbBranchPoints ].size(); ++iS )
- shortMap.Add( theShortEdges[ nbBranchPoints ][ iS ]);
+ for ( size_t iS = 0; iS < theShortEdges[ nbBranchPoints > 0 ].size(); ++iS )
+ shortMap.Add( theShortEdges[ nbBranchPoints > 0 ][ iS ]);
++nbBranchPoints;
}
theSinuEdges [0].size() > 0 && theSinuEdges [1].size() > 0 );
// the sinuous EDGEs can be composite and C0 continuous,
- // therefor we use a complex criterion to find TWO short non-sinuous EDGEs
+ // therefore we use a complex criterion to find TWO short non-sinuous EDGEs
// and the rest EDGEs will be treated as sinuous.
// A short edge should have the following features:
// a) straight
}
// cout << "from salome.geom import geomBuilder" << endl;
- // cout << "geompy = geomBuilder.New(salome.myStudy)" << endl;
+ // cout << "geompy = geomBuilder.New()" << endl;
Handle(TColgp_HArray1OfPnt) points = new TColgp_HArray1OfPnt(1, pnt.size());
for ( size_t i = 0; i < pnt.size(); ++i )
{
const double theMinSegLen,
vector<double>& theMAParams )
{
- // check if all EDGEs of one size are meshed, then MA discretization is not needed
+ // Check if all EDGEs of one size are meshed, then MA discretization is not needed
SMESH_Mesh* mesh = theHelper.GetMesh();
size_t nbComputedEdges[2] = { 0, 0 };
for ( size_t iS = 0; iS < 2; ++iS )
for ( size_t i = 0; i < theSinuFace._sinuSide[iS].size(); ++i )
{
- bool isComputed = ( ! mesh->GetSubMesh( theSinuFace._sinuSide[iS][i] )->IsEmpty() );
+ const TopoDS_Edge& sinuEdge = theSinuFace._sinuSide[iS][i];
+ SMESH_subMesh* sm = mesh->GetSubMesh( sinuEdge );
+ bool isComputed = ( !sm->IsEmpty() );
+ if ( isComputed )
+ {
+ TopAbs_ShapeEnum shape = getHypShape( mesh, sinuEdge );
+ if ( shape == TopAbs_SHAPE || shape <= TopAbs_FACE )
+ {
+ // EDGE computed using global hypothesis -> clear it
+ bool hasComputedFace = false;
+ PShapeIteratorPtr faceIt = theHelper.GetAncestors( sinuEdge, *mesh, TopAbs_FACE );
+ while ( const TopoDS_Shape* face = faceIt->next() )
+ if (( !face->IsSame( theSinuFace.Face() )) &&
+ ( hasComputedFace = !mesh->GetSubMesh( *face )->IsEmpty() ))
+ break;
+ if ( !hasComputedFace )
+ {
+ sm->ComputeStateEngine( SMESH_subMesh::CLEAN );
+ isComputed = false;
+ }
+ }
+ }
nbComputedEdges[ iS ] += isComputed;
}
if ( nbComputedEdges[0] == theSinuFace._sinuSide[0].size() ||
nbComputedEdges[1] == theSinuFace._sinuSide[1].size() )
return true; // discretization is not needed
-
+ // Make MA EDGE
TopoDS_Edge branchEdge = makeEdgeFromMA( theHelper, theMA, theMinSegLen );
if ( branchEdge.IsNull() )
return false;
// BRepTools::Write( branchEdge, file);
// cout << "Write " << file << endl;
- // look for a most local hyps assigned to theSinuEdges
- TopoDS_Edge edge = theSinuFace._sinuEdges[0];
- int mostSimpleShape = (int) getHypShape( mesh, edge );
- for ( size_t i = 1; i < theSinuFace._sinuEdges.size(); ++i )
+
+ // Find 1D algo to mesh branchEdge
+
+ // look for a most local 1D hyp assigned to the FACE
+ int mostSimpleShape = -1, maxShape = TopAbs_EDGE;
+ TopoDS_Edge edge;
+ for ( size_t i = 0; i < theSinuFace._sinuEdges.size(); ++i )
{
- int shapeType = (int) getHypShape( mesh, theSinuFace._sinuEdges[i] );
- if ( shapeType > mostSimpleShape )
+ TopAbs_ShapeEnum shapeType = getHypShape( mesh, theSinuFace._sinuEdges[i] );
+ if ( mostSimpleShape < shapeType && shapeType < maxShape )
+ {
edge = theSinuFace._sinuEdges[i];
+ mostSimpleShape = shapeType;
+ }
}
SMESH_Algo* algo = the1dAlgo;
- if ( mostSimpleShape != TopAbs_SHAPE )
+ if ( mostSimpleShape > -1 )
{
algo = mesh->GetSubMesh( edge )->GetAlgo();
SMESH_Hypothesis::Hypothesis_Status status;
TmpMesh tmpMesh;
tmpMesh.ShapeToMesh( branchEdge );
try {
- mesh->GetGen()->Compute( tmpMesh, branchEdge, true, true ); // make nodes on VERTEXes
+ mesh->GetGen()->Compute( tmpMesh, branchEdge, SMESH_Gen::SHAPE_ONLY_UPWARD ); // make nodes on VERTEXes
if ( !algo->Compute( tmpMesh, branchEdge ))
return false;
}
{
const SMDS_MeshNode* _node;
double _u;
- int _edgeInd; // index in theSinuEdges vector
+ size_t _edgeInd; // index in theSinuEdges vector
NodePoint(): _node(0), _u(0), _edgeInd(-1) {}
NodePoint(const SMDS_MeshNode* n, double u, size_t iEdge ): _node(n), _u(u), _edgeInd(iEdge) {}
NodePoint(const SMESH_MAT2d::BoundaryPoint& p) : _node(0), _u(p._param), _edgeInd(p._edgeIndex) {}
gp_Pnt Point(const vector< Handle(Geom_Curve) >& curves) const
{
- return curves[ _edgeInd ]->Value( _u );
+ return _node ? SMESH_TNodeXYZ(_node) : curves[ _edgeInd ]->Value( _u );
}
};
+ typedef multimap< double, pair< NodePoint, NodePoint > > TMAPar2NPoints;
//================================================================================
/*!
* \param [in] theDivPoints - projections of VERTEXes to MA
* \param [in] theSinuEdges - the sinuous EDGEs
* \param [in] theSideEdgeIDs - indices of sinuous EDGEs per side
- * \param [in] theIsEdgeComputed - is sinuous EGDE is meshed
+ * \param [in] theIsEdgeComputed - is sinuous EDGE is meshed
* \param [in,out] thePointsOnE - the map to fill
* \param [out] theNodes2Merge - the map of nodes to merge
*/
//================================================================================
- bool projectVertices( SMESH_MesherHelper& theHelper,
- const SMESH_MAT2d::MedialAxis& theMA,
- const vector< SMESH_MAT2d::BranchPoint >& theDivPoints,
- const vector< std::size_t > & theEdgeIDs1,
- const vector< std::size_t > & theEdgeIDs2,
- const vector< bool >& theIsEdgeComputed,
- map< double, pair< NodePoint, NodePoint > > & thePointsOnE,
- SinuousFace& theSinuFace)
+ bool projectVertices( SMESH_MesherHelper& theHelper,
+ const SMESH_MAT2d::MedialAxis& theMA,
+ vector< SMESH_MAT2d::BranchPoint >& theDivPoints,
+ const vector< std::size_t > & theEdgeIDs1,
+ const vector< std::size_t > & theEdgeIDs2,
+ const vector< bool >& theIsEdgeComputed,
+ TMAPar2NPoints & thePointsOnE,
+ SinuousFace& theSinuFace)
{
+ if ( theDivPoints.empty() )
+ return true;
+
SMESHDS_Mesh* meshDS = theHelper.GetMeshDS();
- const vector<TopoDS_Edge>& theSinuEdges = theSinuFace._sinuEdges;
+ const vector< TopoDS_Edge >& theSinuEdges = theSinuFace._sinuEdges;
const vector< Handle(Geom_Curve) >& theCurves = theSinuFace._sinuCurves;
double uMA;
- SMESH_MAT2d::BoundaryPoint bp[2];
+ SMESH_MAT2d::BoundaryPoint bp[2]; // 2 sinuous sides
const SMESH_MAT2d::Branch& branch = *theMA.getBranch(0);
+ {
+ // add to thePointsOnE NodePoint's of ends of theSinuEdges
+ if ( !branch.getBoundaryPoints( 0., bp[0], bp[1] ) ||
+ !theMA.getBoundary().moveToClosestEdgeEnd( bp[0] )) return false;
+ if ( !theSinuFace.IsRing() &&
+ !theMA.getBoundary().moveToClosestEdgeEnd( bp[1] )) return false;
+ NodePoint np0( bp[0] ), np1( bp[1] );
+ findVertexAndNode( np0, theSinuEdges, meshDS );
+ findVertexAndNode( np1, theSinuEdges, meshDS );
+ thePointsOnE.insert( make_pair( -0.1, make_pair( np0, np1 )));
+ }
+ if ( !theSinuFace.IsRing() )
+ {
+ if ( !branch.getBoundaryPoints( 1., bp[0], bp[1] ) ||
+ !theMA.getBoundary().moveToClosestEdgeEnd( bp[0] ) ||
+ !theMA.getBoundary().moveToClosestEdgeEnd( bp[1] )) return false;
+ NodePoint np0( bp[0] ), np1( bp[1] );
+ findVertexAndNode( np0, theSinuEdges, meshDS );
+ findVertexAndNode( np1, theSinuEdges, meshDS );
+ thePointsOnE.insert( make_pair( 1.1, make_pair( np0, np1)));
+ }
+ else
+ {
+ // project a VERTEX of outer sinuous side corresponding to branch(0.)
+ // which is not included into theDivPoints
+ if ( ! ( theDivPoints[0]._iEdge == 0 &&
+ theDivPoints[0]._edgeParam == 0. )) // recursive call
+ {
+ SMESH_MAT2d::BranchPoint brp( &branch, 0, 0. );
+ vector< SMESH_MAT2d::BranchPoint > divPoint( 1, brp );
+ vector< std::size_t > edgeIDs1(2), edgeIDs2(2);
+ edgeIDs1[0] = theEdgeIDs1.back();
+ edgeIDs1[1] = theEdgeIDs1[0];
+ edgeIDs2[0] = theEdgeIDs2.back();
+ edgeIDs2[1] = theEdgeIDs2[0];
+ projectVertices( theHelper, theMA, divPoint, edgeIDs1, edgeIDs2,
+ theIsEdgeComputed, thePointsOnE, theSinuFace );
+ }
+ }
- // add to thePointsOnE NodePoint's of ends of theSinuEdges
- if ( !branch.getBoundaryPoints( 0., bp[0], bp[1] ) ||
- !theMA.getBoundary().moveToClosestEdgeEnd( bp[0] ) ||
- !theMA.getBoundary().moveToClosestEdgeEnd( bp[1] )) return false;
- NodePoint np0( bp[0]), np1( bp[1] );
- findVertexAndNode( np0, theSinuEdges, meshDS );
- findVertexAndNode( np1, theSinuEdges, meshDS );
- thePointsOnE.insert( make_pair( -0.1, make_pair( np0, np1 )));
-
- if ( !branch.getBoundaryPoints( 1., bp[0], bp[1] ) ||
- !theMA.getBoundary().moveToClosestEdgeEnd( bp[0] ) ||
- !theMA.getBoundary().moveToClosestEdgeEnd( bp[1] )) return false;
- np0 = bp[0]; np1 = bp[1];
- findVertexAndNode( np0, theSinuEdges, meshDS );
- findVertexAndNode( np1, theSinuEdges, meshDS );
- thePointsOnE.insert( make_pair( 1.1, make_pair( np0, np1)));
-
- // project theDivPoints
-
- if ( theDivPoints.empty() )
- return true;
+ // project theDivPoints and keep projections to merge
+ TMAPar2NPoints::iterator u2NP;
+ vector< TMAPar2NPoints::iterator > projToMerge;
for ( size_t i = 0; i < theDivPoints.size(); ++i )
{
if ( !branch.getParameter( theDivPoints[i], uMA ))
findVertexAndNode( np[0], theSinuEdges, meshDS, theEdgeIDs1[i], theEdgeIDs1[i+1] ),
findVertexAndNode( np[1], theSinuEdges, meshDS, theEdgeIDs2[i], theEdgeIDs2[i+1] )
};
+ const size_t iVert = isVertex[0] ? 0 : 1; // side with a VERTEX
+ const size_t iNode = 1 - iVert; // opposite (meshed?) side
- map< double, pair< NodePoint, NodePoint > >::iterator u2NP =
- thePointsOnE.insert( make_pair( uMA, make_pair( np[0], np[1]))).first;
+ if ( isVertex[0] != isVertex[1] ) // try to find an opposite VERTEX
+ {
+ theMA.getBoundary().moveToClosestEdgeEnd( bp[iNode] ); // EDGE -> VERTEX
+ SMESH_MAT2d::BranchPoint brp;
+ theMA.getBoundary().getBranchPoint( bp[iNode], brp ); // WIRE -> MA
+ SMESH_MAT2d::BoundaryPoint bp2[2];
+ branch.getBoundaryPoints( brp, bp2[0], bp2[1] ); // MA -> WIRE
+ NodePoint np2[2] = { NodePoint( bp2[0]), NodePoint( bp2[1]) };
+ findVertexAndNode( np2[0], theSinuEdges, meshDS );
+ findVertexAndNode( np2[1], theSinuEdges, meshDS );
+ if ( np2[ iVert ]._node == np[ iVert ]._node &&
+ np2[ iNode ]._node)
+ {
+ np[ iNode ] = np2[ iNode ];
+ isVertex[ iNode ] = true;
+ }
+ }
+
+ u2NP = thePointsOnE.insert( make_pair( uMA, make_pair( np[0], np[1])));
if ( !isVertex[0] && !isVertex[1] ) return false; // error
if ( isVertex[0] && isVertex[1] )
continue;
- const size_t iVert = isVertex[0] ? 0 : 1;
- const size_t iNode = 1 - iVert;
- bool isOppComputed = theIsEdgeComputed[ np[ iNode ]._edgeInd ];
- if ( !isOppComputed )
- continue;
+ // bool isOppComputed = theIsEdgeComputed[ np[ iNode ]._edgeInd ];
+ // if ( isOppComputed )
+ projToMerge.push_back( u2NP );
+ }
+
+ // merge projections
+
+ for ( size_t i = 0; i < projToMerge.size(); ++i )
+ {
+ u2NP = projToMerge[i];
+ const size_t iVert = get( u2NP->second, 0 )._node ? 0 : 1; // side with a VERTEX
+ const size_t iNode = 1 - iVert; // opposite (meshed?) side
// a VERTEX is projected on a meshed EDGE; there are two options:
// 1) a projected point is joined with a closet node if a strip between this and neighbor
// projection is set to the BoundaryPoint of this projection
// evaluate distance to neighbor projections
- const double rShort = 0.2;
- bool isShortPrev[2], isShortNext[2];
- map< double, pair< NodePoint, NodePoint > >::iterator u2NPPrev = u2NP, u2NPNext = u2NP;
+ const double rShort = 0.33;
+ bool isShortPrev[2], isShortNext[2], isPrevCloser[2];
+ TMAPar2NPoints::iterator u2NPPrev = u2NP, u2NPNext = u2NP;
--u2NPPrev; ++u2NPNext;
- // bool hasPrev = ( u2NP != thePointsOnE.begin() );
- // bool hasNext = ( u2NPNext != thePointsOnE.end() );
- // if ( !hasPrev ) u2NPPrev = u2NP0;
- // if ( !hasNext ) u2NPNext = u2NP1;
+ if ( u2NPNext == thePointsOnE.end() )
+ u2NPNext = thePointsOnE.begin(); // hope theSinuFace.IsRing()
for ( int iS = 0; iS < 2; ++iS ) // side with Vertex and side with Nodes
{
NodePoint np = get( u2NP->second, iS );
double distPrev = p.Distance( pPrev );
double distNext = p.Distance( pNext );
double r = distPrev / ( distPrev + distNext );
- isShortPrev[iS] = ( r < rShort );
- isShortNext[iS] = (( 1 - r ) > ( 1 - rShort ));
+ isShortPrev [iS] = ( r < rShort );
+ isShortNext [iS] = (( 1 - r ) < rShort );
+ isPrevCloser[iS] = (( r < 0.5 ) && ( theSinuFace.IsRing() || u2NPPrev->first > 0 ));
}
- // if ( !hasPrev ) isShortPrev[0] = isShortPrev[1] = false;
- // if ( !hasNext ) isShortNext[0] = isShortNext[1] = false;
- map< double, pair< NodePoint, NodePoint > >::iterator u2NPClose;
+ TMAPar2NPoints::iterator u2NPClose;
if (( isShortPrev[0] && isShortPrev[1] ) || // option 2) -> remove a too close projection
( isShortNext[0] && isShortNext[1] ))
{
- u2NPClose = isShortPrev[0] ? u2NPPrev : u2NPNext;
+ u2NPClose = isPrevCloser[0] ? u2NPPrev : u2NPNext;
NodePoint& npProj = get( u2NP->second, iNode ); // NP of VERTEX projection
+ NodePoint& npVert = get( u2NP->second, iVert ); // NP of VERTEX
NodePoint npCloseN = get( u2NPClose->second, iNode ); // NP close to npProj
- NodePoint npCloseV = get( u2NPClose->second, iVert ); // NP close to VERTEX
- if ( !npCloseV._node )
+ NodePoint npCloseV = get( u2NPClose->second, iVert ); // NP close to npVert
+ if ( !npCloseV._node || npCloseV._node == npVert._node )
{
npProj = npCloseN;
- thePointsOnE.erase( isShortPrev[0] ? u2NPPrev : u2NPNext );
+ thePointsOnE.erase( u2NPClose );
continue;
}
else
{
- // can't remove the neighbor projection as it is also from VERTEX, -> option 1)
+ // can't remove the neighbor projection as it is also from VERTEX -> option 1)
}
}
// else: option 1) - wide enough -> "duplicate" existing node
{
- u2NPClose = isShortPrev[ iNode ] ? u2NPPrev : u2NPNext;
+ u2NPClose = isPrevCloser[ iNode ] ? u2NPPrev : u2NPNext;
NodePoint& npProj = get( u2NP->second, iNode ); // NP of VERTEX projection
NodePoint& npCloseN = get( u2NPClose->second, iNode ); // NP close to npProj
npProj = npCloseN;
//theNodes2Merge[ npCloseN._node ].push_back( npProj._node );
}
}
+
+ // remove auxiliary NodePoint's of ends of theSinuEdges
+ for ( u2NP = thePointsOnE.begin(); u2NP->first < 0; )
+ thePointsOnE.erase( u2NP++ );
+ thePointsOnE.erase( 1.1 );
+
return true;
}
+ double getUOnEdgeByPoint( const size_t iEdge,
+ const NodePoint* point,
+ SinuousFace& sinuFace )
+ {
+ if ( point->_edgeInd == iEdge )
+ return point->_u;
+
+ TopoDS_Vertex V0 = TopExp::FirstVertex( sinuFace._sinuEdges[ iEdge ]);
+ TopoDS_Vertex V1 = TopExp::LastVertex ( sinuFace._sinuEdges[ iEdge ]);
+ gp_Pnt p0 = BRep_Tool::Pnt( V0 );
+ gp_Pnt p1 = BRep_Tool::Pnt( V1 );
+ gp_Pnt p = point->Point( sinuFace._sinuCurves );
+
+ double f,l;
+ BRep_Tool::Range( sinuFace._sinuEdges[ iEdge ], f,l );
+ return p.SquareDistance( p0 ) < p.SquareDistance( p1 ) ? f : l;
+ }
+
//================================================================================
/*!
* \brief Move coincident nodes to make node params on EDGE unique
*/
//================================================================================
- void separateNodes( SMESH_MesherHelper& theHelper,
- map< double, pair< NodePoint, NodePoint > > & thePointsOnE,
- SinuousFace& theSinuFace )
+ void separateNodes( SMESH_MesherHelper& theHelper,
+ const SMESH_MAT2d::MedialAxis& /*theMA*/,
+ TMAPar2NPoints & thePointsOnE,
+ SinuousFace& theSinuFace,
+ const vector< bool >& theIsComputedEdge)
{
if ( thePointsOnE.size() < 2 )
return;
SMESHDS_Mesh* meshDS = theHelper.GetMeshDS();
- const vector<TopoDS_Edge>& theSinuEdges = theSinuFace._sinuEdges;
+ const vector<TopoDS_Edge>& theSinuEdges = theSinuFace._sinuEdges;
+ const vector< Handle(Geom_Curve) >& curves = theSinuFace._sinuCurves;
+
+ //SMESH_MAT2d::BoundaryPoint bp[2];
+ //const SMESH_MAT2d::Branch& branch = *theMA.getBranch(0);
- typedef map< double, pair< NodePoint, NodePoint > >::iterator TIterator;
+ typedef TMAPar2NPoints::iterator TIterator;
- for ( int iSide = 0; iSide < 2; ++iSide )
+ for ( int iSide = 0; iSide < 2; ++iSide ) // loop on two sinuous sides
{
- TIterator u2NP0, u2NP1, u2NP = thePointsOnE.begin();
+ // get a tolerance to compare points
+ double tol = Precision::Confusion();
+ for ( size_t i = 0; i < theSinuFace._sinuSide[ iSide ].size(); ++i )
+ tol = Max( tol , BRep_Tool::Tolerance( theSinuFace._sinuSide[ iSide ][ i ]));
+
+ // find coincident points
+ TIterator u2NP = thePointsOnE.begin();
+ vector< TIterator > sameU2NP( 1, u2NP++ );
while ( u2NP != thePointsOnE.end() )
{
- while ( u2NP != thePointsOnE.end() &&
- get( u2NP->second, iSide )._node )
- ++u2NP; // skip NP with an existing node (VERTEXes must be meshed)
- if ( u2NP == thePointsOnE.end() )
- break;
-
- // find a range of not meshed NP on one EDGE
- u2NP0 = u2NP;
- if ( !findVertexAndNode( get( u2NP0->second, iSide ), theSinuEdges ))
- --u2NP0;
- int iCurEdge = get( u2NP->second, iSide )._edgeInd;
- int nbNP = 1;
- while ( get( u2NP->second, iSide )._edgeInd == iCurEdge &&
- get( u2NP->second, iSide )._node == 0 )
- ++u2NP, ++nbNP;
- u2NP1 = u2NP; // end of not meshed NP on iCurEdge
-
- // fix parameters of extremity NP of the range
- NodePoint* np0 = & get( u2NP0->second, iSide );
- NodePoint* np1 = & get( u2NP1->second, iSide );
- const TopoDS_Edge& edge = TopoDS::Edge( theSinuFace._sinuEdges[ iCurEdge ]);
- if ( np0->_node && np0->_edgeInd != iCurEdge )
+ for ( ; u2NP != thePointsOnE.end(); ++u2NP )
{
- np0->_u = theHelper.GetNodeU( edge, np0->_node );
- np0->_edgeInd = iCurEdge;
- }
- if ( np1->_node && np1->_edgeInd != iCurEdge )
- {
- np1->_u = theHelper.GetNodeU( edge, np1->_node );
- np1->_edgeInd = iCurEdge;
+ NodePoint& np1 = get( sameU2NP.back()->second, iSide );
+ NodePoint& np2 = get( u2NP ->second, iSide );
+
+ if (( !np1._node || !np2._node ) &&
+ ( np1.Point( curves ).SquareDistance( np2.Point( curves )) < tol*tol ))
+ {
+ sameU2NP.push_back( u2NP );
+ }
+ else if ( sameU2NP.size() == 1 )
+ {
+ sameU2NP[ 0 ] = u2NP;
+ }
+ else
+ {
+ break;
+ }
}
- // find coincident NPs
- double f,l;
- BRep_Tool::Range( edge, f,l );
- double tol = 1e-2* (l-f) / nbNP;
- TIterator u2NPEq = thePointsOnE.end();
- u2NP = u2NP0;
- for ( ++u2NP; u2NP0 != u2NP1; ++u2NP, ++u2NP0 )
+ if ( sameU2NP.size() > 1 )
{
- np0 = & get( u2NP0->second, iSide );
- np1 = & get( u2NP->second, iSide );
- bool coincides = ( Abs( np0->_u - np1->_u ) < tol );
- if ( coincides && u2NPEq == thePointsOnE.end() )
- u2NPEq = u2NP0;
-
- if (( u2NPEq != thePointsOnE.end() ) &&
- ( u2NP == u2NP1 || !coincides ))
+ // find an existing node on VERTEX among sameU2NP and get underlying EDGEs
+ const SMDS_MeshNode* existingNode = 0;
+ set< size_t > edgeInds;
+ NodePoint* np;
+ for ( size_t i = 0; i < sameU2NP.size(); ++i )
+ {
+ np = &get( sameU2NP[i]->second, iSide );
+ if ( np->_node )
+ if ( !existingNode || np->_node->GetPosition()->GetDim() == 0 )
+ existingNode = np->_node;
+ edgeInds.insert( np->_edgeInd );
+ }
+ list< const SMDS_MeshNode* >& mergeNodes = theSinuFace._nodesToMerge[ existingNode ];
+
+ TIterator u2NPprev = sameU2NP.front();
+ TIterator u2NPnext = sameU2NP.back() ;
+ if ( u2NPprev->first < 0. ) ++u2NPprev;
+ if ( u2NPnext->first > 1. ) --u2NPnext;
+
+ set< size_t >::iterator edgeID = edgeInds.begin();
+ for ( ; edgeID != edgeInds.end(); ++edgeID )
{
- if ( !get( u2NPEq->second, iSide )._node )
- --u2NPEq;
- if ( coincides && !get( u2NP->second, iSide )._node && u2NP0 != u2NP1 )
- ++u2NP;
-
- // distribute nodes between u2NPEq and u2NP
- size_t nbSeg = std::distance( u2NPEq, u2NP );
- double du = 1. / nbSeg * ( get( u2NP->second, iSide )._u -
- get( u2NPEq->second, iSide )._u );
- double u = get( u2NPEq->second, iSide )._u + du;
-
- const SMDS_MeshNode* closeNode =
- get(( coincides ? u2NP : u2NPEq )->second, iSide )._node;
- list< const SMDS_MeshNode* >& eqNodes = theSinuFace._nodesToMerge[ closeNode ];
-
- for ( ++u2NPEq; u2NPEq != u2NP; ++u2NPEq, u += du )
+ // get U range on iEdge within which the equal points will be distributed
+ double u0, u1;
+ np = &get( u2NPprev->second, iSide );
+ u0 = getUOnEdgeByPoint( *edgeID, np, theSinuFace );
+
+ np = &get( u2NPnext->second, iSide );
+ u1 = getUOnEdgeByPoint( *edgeID, np, theSinuFace );
+
+ if ( u0 == u1 )
{
- np0 = & get( u2NPEq->second, iSide );
- np0->_u = u;
- gp_Pnt p = np0->Point( theSinuFace._sinuCurves );
- np0->_node = meshDS->AddNode( p.X(), p.Y(), p.Z() );
- meshDS->SetNodeOnEdge( np0->_node, theSinuEdges[ np0->_edgeInd ], np0->_u );
- if ( !closeNode )
- eqNodes = theSinuFace._nodesToMerge[ closeNode = np0->_node ];
- else
- eqNodes.push_back( np0->_node );
+ if ( u2NPprev != thePointsOnE.begin() ) --u2NPprev;
+ if ( u2NPnext != --thePointsOnE.end() ) ++u2NPnext;
+ np = &get( u2NPprev->second, iSide );
+ u0 = getUOnEdgeByPoint( *edgeID, np, theSinuFace );
+ np = &get( u2NPnext->second, iSide );
+ u1 = getUOnEdgeByPoint( *edgeID, np, theSinuFace );
+ }
+
+ // distribute points and create nodes
+ double du = ( u1 - u0 ) / ( sameU2NP.size() + 1 /*!existingNode*/ );
+ double u = u0 + du;
+ for ( size_t i = 0; i < sameU2NP.size(); ++i )
+ {
+ np = &get( sameU2NP[i]->second, iSide );
+ if ( !np->_node && *edgeID == np->_edgeInd )
+ {
+ np->_u = u;
+ u += du;
+ gp_Pnt p = np->Point( curves );
+ np->_node = meshDS->AddNode( p.X(), p.Y(), p.Z() );
+ meshDS->SetNodeOnEdge( np->_node, theSinuEdges[ *edgeID ], np->_u );
+
+ if ( theIsComputedEdge[ *edgeID ])
+ mergeNodes.push_back( np->_node );
+ }
}
}
+
+ sameU2NP.resize( 1 );
+ u2NP = ++sameU2NP.back();
+ sameU2NP[ 0 ] = u2NP;
+
+ } // if ( sameU2NP.size() > 1 )
+ } // while ( u2NP != thePointsOnE.end() )
+ } // for ( int iSide = 0; iSide < 2; ++iSide )
+
+ return;
+ } // separateNodes()
+
+
+ //================================================================================
+ /*!
+ * \brief Find association of nodes existing on the sinuous sides of a ring
+ *
+ * TMAPar2NPoints filled here is used in setQuadSides() only if theSinuFace.IsRing()
+ * to find most distant nodes of the inner and the outer wires
+ */
+ //================================================================================
+
+ void assocNodes( SMESH_MesherHelper& theHelper,
+ SinuousFace& theSinuFace,
+ const SMESH_MAT2d::MedialAxis& theMA,
+ TMAPar2NPoints & thePointsOnE )
+ {
+ SMESH_Mesh* mesh = theHelper.GetMesh();
+ SMESHDS_Mesh* meshDS = theHelper.GetMeshDS();
+
+ list< TopoDS_Edge > ee1( theSinuFace._sinuSide [0].begin(), theSinuFace._sinuSide [0].end() );
+ list< TopoDS_Edge > ee2( theSinuFace._sinuSide [1].begin(), theSinuFace._sinuSide [1].end() );
+ StdMeshers_FaceSide sideOut( theSinuFace.Face(), ee1, mesh, true, true, &theHelper );
+ StdMeshers_FaceSide sideIn ( theSinuFace.Face(), ee2, mesh, true, true, &theHelper );
+ const UVPtStructVec& uvsOut = sideOut.GetUVPtStruct();
+ const UVPtStructVec& uvsIn = sideIn.GetUVPtStruct();
+ // if ( uvs1.size() != uvs2.size() )
+ // return;
+
+ const SMESH_MAT2d::Branch& branch = *theMA.getBranch(0);
+ SMESH_MAT2d::BoundaryPoint bp[2];
+ SMESH_MAT2d::BranchPoint brp;
+
+ map< double, const SMDS_MeshNode* > nodeParams; // params of existing nodes
+ map< double, const SMDS_MeshNode* >::iterator u2n;
+
+ // find a node of sideOut most distant from sideIn
+
+ vector< BRepAdaptor_Curve > curvesIn( theSinuFace._sinuSide[1].size() );
+ for ( size_t iE = 0; iE < theSinuFace._sinuSide[1].size(); ++iE )
+ curvesIn[ iE ].Initialize( theSinuFace._sinuSide[1][iE] );
+
+ double maxDist = 0;
+ SMESH_MAT2d::BoundaryPoint bpIn; // closest IN point
+ const SMDS_MeshNode* nOut = 0;
+ const size_t nbEOut = theSinuFace._sinuSide[0].size();
+ for ( size_t iE = 0; iE < nbEOut; ++iE )
+ {
+ const TopoDS_Edge& E = theSinuFace._sinuSide[0][iE];
+
+ if ( !SMESH_Algo::GetSortedNodesOnEdge( meshDS, E, /*skipMedium=*/true, nodeParams ))
+ return;
+ for ( u2n = nodeParams.begin(); u2n != nodeParams.end(); ++u2n )
+ {
+ // point on EDGE (u2n) --> MA point (brp)
+ if ( !theMA.getBoundary().getBranchPoint( iE, u2n->first, brp ) ||
+ !branch.getBoundaryPoints( brp, bp[0], bp[1] ))
+ return;
+ gp_Pnt pOut = SMESH_TNodeXYZ( u2n->second );
+ gp_Pnt pIn = curvesIn[ bp[1]._edgeIndex - nbEOut ].Value( bp[1]._param );
+ double dist = pOut.SquareDistance( pIn );
+ if ( dist > maxDist )
+ {
+ maxDist = dist;
+ nOut = u2n->second;
+ bpIn = bp[1];
}
- u2NP = u2NP1;
- while ( get( u2NP->second, iSide )._edgeInd != iCurEdge )
- --u2NP;
- u2NP++;
}
}
- }
+ const SMDS_MeshNode* nIn = 0;
+ if ( !SMESH_Algo::GetSortedNodesOnEdge( meshDS,
+ theSinuFace._sinuEdges[ bpIn._edgeIndex ],
+ /*skipMedium=*/true,
+ nodeParams ))
+ return;
+ u2n = nodeParams.lower_bound( bpIn._param );
+ if ( u2n == nodeParams.end() )
+ nIn = nodeParams.rbegin()->second;
+ else
+ nIn = u2n->second;
+
+ // find position of distant nodes in uvsOut and uvsIn
+ size_t iDistOut, iDistIn;
+ for ( iDistOut = 0; iDistOut < uvsOut.size(); ++iDistOut )
+ {
+ if ( uvsOut[iDistOut].node == nOut )
+ break;
+ }
+ for ( iDistIn = 0; iDistIn < uvsIn.size(); ++iDistIn )
+ {
+ if ( uvsIn[iDistIn].node == nIn )
+ break;
+ }
+ if ( iDistOut == uvsOut.size() || iDistIn == uvsIn.size() )
+ return;
+
+ // store opposite nodes in thePointsOnE (param and EDGE have no sense)
+ pair< NodePoint, NodePoint > oppNodes( NodePoint( nOut, 0, 0 ), NodePoint( nIn, 0, 0));
+ thePointsOnE.insert( make_pair( uvsOut[ iDistOut ].normParam, oppNodes ));
+ int iOut = iDistOut, iIn = iDistIn;
+ int i, nbNodes = std::min( uvsOut.size(), uvsIn.size() );
+ if ( nbNodes > 5 ) nbNodes = 5;
+ for ( i = 0, ++iOut, --iIn; i < nbNodes; ++iOut, --iIn, ++i )
+ {
+ iOut = theHelper.WrapIndex( iOut, uvsOut.size() );
+ iIn = theHelper.WrapIndex( iIn, uvsIn.size() );
+ oppNodes.first._node = uvsOut[ iOut ].node;
+ oppNodes.second._node = uvsIn[ iIn ].node;
+ thePointsOnE.insert( make_pair( uvsOut[ iOut ].normParam, oppNodes ));
+ }
+
+ return;
+ } // assocNodes()
+
+ //================================================================================
+ /*!
+ * \brief Setup sides of SinuousFace::_quad
+ * \param [in] theHelper - helper
+ * \param [in] thePointsOnEdges - NodePoint's on sinuous sides
+ * \param [in,out] theSinuFace - the FACE
+ * \param [in] the1dAlgo - algorithm to use for radial discretization of a ring FACE
+ * \return bool - is OK
+ */
+ //================================================================================
+
+ bool setQuadSides(SMESH_MesherHelper& theHelper,
+ const TMAPar2NPoints& thePointsOnEdges,
+ SinuousFace& theFace,
+ SMESH_Algo* the1dAlgo)
+ {
+ SMESH_Mesh* mesh = theHelper.GetMesh();
+ const TopoDS_Face& face = theFace._quad->face;
+ SMESH_ProxyMesh::Ptr proxyMesh = StdMeshers_ViscousLayers2D::Compute( *mesh, face );
+ if ( !proxyMesh )
+ return false;
+
+ list< TopoDS_Edge > side[4];
+ side[0].insert( side[0].end(), theFace._shortSide[0].begin(), theFace._shortSide[0].end() );
+ side[1].insert( side[1].end(), theFace._sinuSide [1].begin(), theFace._sinuSide [1].end() );
+ side[2].insert( side[2].end(), theFace._shortSide[1].begin(), theFace._shortSide[1].end() );
+ side[3].insert( side[3].end(), theFace._sinuSide [0].begin(), theFace._sinuSide [0].end() );
+
+ for ( int i = 0; i < 4; ++i )
+ {
+ theFace._quad->side[i] = StdMeshers_FaceSide::New( face, side[i], mesh, i < QUAD_TOP_SIDE,
+ /*skipMediumNodes=*/true,
+ &theHelper, proxyMesh );
+ }
+
+ if ( theFace.IsRing() )
+ {
+ // --------------------------------------
+ // Discretize a ring in radial direction
+ // --------------------------------------
+
+ if ( thePointsOnEdges.size() < 4 )
+ return false;
+
+ int nbOut = theFace._quad->side[ 1 ].GetUVPtStruct().size();
+ int nbIn = theFace._quad->side[ 3 ].GetUVPtStruct().size();
+ if ( nbOut == 0 || nbIn == 0 )
+ return false;
+
+ // find most distant opposite nodes
+ double maxDist = 0, dist;
+ TMAPar2NPoints::const_iterator u2NPdist, u2NP = thePointsOnEdges.begin();
+ for ( ; u2NP != thePointsOnEdges.end(); ++u2NP )
+ {
+ SMESH_TNodeXYZ xyz( u2NP->second.first._node ); // node out
+ dist = xyz.SquareDistance( u2NP->second.second._node );// node in
+ if ( dist > maxDist )
+ {
+ u2NPdist = u2NP;
+ maxDist = dist;
+ }
+ }
+ // compute distribution of radial nodes
+ list< double > params; // normalized params
+ static_cast< StdMeshers_QuadFromMedialAxis_1D2D::Algo1D* >
+ ( the1dAlgo )->ComputeDistribution( theHelper,
+ SMESH_TNodeXYZ( u2NPdist->second.first._node ),
+ SMESH_TNodeXYZ( u2NPdist->second.second._node ),
+ params );
+
+ // add a radial quad side
+
+ theHelper.SetElementsOnShape( true );
+ u2NP = thePointsOnEdges.begin();
+ const SMDS_MeshNode* nOut = u2NP->second.first._node;
+ const SMDS_MeshNode* nIn = u2NP->second.second._node;
+ nOut = proxyMesh->GetProxyNode( nOut );
+ nIn = proxyMesh->GetProxyNode( nIn );
+ gp_XY uvOut = theHelper.GetNodeUV( face, nOut );
+ gp_XY uvIn = theHelper.GetNodeUV( face, nIn );
+ Handle(Geom_Surface) surface = BRep_Tool::Surface( face );
+ UVPtStructVec uvsNew; UVPtStruct uvPt;
+ uvPt.node = nOut;
+ uvPt.u = uvOut.X();
+ uvPt.v = uvOut.Y();
+ uvsNew.push_back( uvPt );
+ for (list<double>::iterator itU = params.begin(); itU != params.end(); ++itU )
+ {
+ gp_XY uv = ( 1 - *itU ) * uvOut + *itU * uvIn; // applied in direction Out -> In
+ gp_Pnt p = surface->Value( uv.X(), uv.Y() );
+ uvPt.node = theHelper.AddNode( p.X(), p.Y(), p.Z(), /*id=*/0, uv.X(), uv.Y() );
+ uvPt.u = uv.X();
+ uvPt.v = uv.Y();
+ uvsNew.push_back( uvPt );
+ }
+ uvPt.node = nIn;
+ uvPt.u = uvIn.X();
+ uvPt.v = uvIn.Y();
+ uvsNew.push_back( uvPt );
+
+ theFace._quad->side[ 0 ] = StdMeshers_FaceSide::New( uvsNew );
+ theFace._quad->side[ 2 ] = theFace._quad->side[ 0 ];
+ if ( nbIn != nbOut )
+ theFace._quad->side[ 2 ] = StdMeshers_FaceSide::New( uvsNew );
+
+ // assure that the outer sinuous side starts at nOut
+ {
+ const UVPtStructVec& uvsOut = theFace._quad->side[ 3 ].GetUVPtStruct(); // _sinuSide[0]
+ size_t i; // find UVPtStruct holding nOut
+ for ( i = 0; i < uvsOut.size(); ++i )
+ if ( nOut == uvsOut[i].node )
+ break;
+ if ( i == uvsOut.size() )
+ return false;
+
+ if ( i != 0 && i != uvsOut.size()-1 )
+ {
+ // create a new OUT quad side
+ uvsNew.clear();
+ uvsNew.reserve( uvsOut.size() );
+ uvsNew.insert( uvsNew.end(), uvsOut.begin() + i, uvsOut.end() );
+ uvsNew.insert( uvsNew.end(), uvsOut.begin() + 1, uvsOut.begin() + i + 1);
+ theFace._quad->side[ 3 ] = StdMeshers_FaceSide::New( uvsNew );
+ }
+ }
+
+ // rotate the IN side if opposite nodes of IN and OUT sides don't match
+
+ const SMDS_MeshNode * nIn0 = theFace._quad->side[ 1 ].First().node;
+ if ( nIn0 != nIn )
+ {
+ nIn = proxyMesh->GetProxyNode( nIn );
+ const UVPtStructVec& uvsIn = theFace._quad->side[ 1 ].GetUVPtStruct(); // _sinuSide[1]
+ size_t i; // find UVPtStruct holding nIn
+ for ( i = 0; i < uvsIn.size(); ++i )
+ if ( nIn == uvsIn[i].node )
+ break;
+ if ( i == uvsIn.size() )
+ return false;
+
+ // create a new IN quad side
+ uvsNew.clear();
+ uvsNew.reserve( uvsIn.size() );
+ uvsNew.insert( uvsNew.end(), uvsIn.begin() + i, uvsIn.end() );
+ uvsNew.insert( uvsNew.end(), uvsIn.begin() + 1, uvsIn.begin() + i + 1);
+ theFace._quad->side[ 1 ] = StdMeshers_FaceSide::New( uvsNew );
+ }
+
+ if ( theFace._quad->side[ 1 ].GetUVPtStruct().empty() ||
+ theFace._quad->side[ 3 ].GetUVPtStruct().empty() )
+ return false;
+
+ } // if ( theFace.IsRing() )
+
+ return true;
+
+ } // setQuadSides()
//================================================================================
/*!
* \brief Divide the sinuous EDGEs by projecting the division point of Medial
- * Axis to the EGDEs
+ * Axis to the EDGEs
* \param [in] theHelper - the helper
* \param [in] theMinSegLen - minimal segment length
* \param [in] theMA - the Medial Axis
* \param [in] theMAParams - parameters of division points of \a theMA
* \param [in] theSinuEdges - the EDGEs to make nodes on
* \param [in] theSinuSide0Size - the number of EDGEs in the 1st sinuous side
+ * \param [in] the1dAlgo - algorithm to use for radial discretization of a ring FACE
* \return bool - is OK or not
*/
//================================================================================
double /*theMinSegLen*/,
SMESH_MAT2d::MedialAxis& theMA,
vector<double>& theMAParams,
- SinuousFace& theSinuFace)
+ SinuousFace& theSinuFace,
+ SMESH_Algo* the1dAlgo)
{
if ( theMA.nbBranches() != 1 )
return false;
// get data of sinuous EDGEs and remove unnecessary nodes
const vector< TopoDS_Edge >& theSinuEdges = theSinuFace._sinuEdges;
vector< Handle(Geom_Curve) >& curves = theSinuFace._sinuCurves;
- vector< int > edgeIDs( theSinuEdges.size() );
- vector< bool > isComputed( theSinuEdges.size() );
+ vector< int > edgeIDs ( theSinuEdges.size() ); // IDs in the main shape
+ vector< bool > isComputed( theSinuEdges.size() );
curves.resize( theSinuEdges.size(), 0 );
+ bool allComputed = true;
for ( size_t i = 0; i < theSinuEdges.size(); ++i )
{
curves[i] = BRep_Tool::Curve( theSinuEdges[i], f,l );
SMESH_subMesh* sm = mesh->GetSubMesh( theSinuEdges[i] );
edgeIDs [i] = sm->GetId();
isComputed[i] = ( !sm->IsEmpty() );
- if ( isComputed[i] )
- {
- TopAbs_ShapeEnum shape = getHypShape( mesh, theSinuEdges[i] );
- if ( shape == TopAbs_SHAPE || shape <= TopAbs_FACE )
- {
- // EDGE computed using global hypothesis -> clear it
- bool hasComputedFace = false;
- PShapeIteratorPtr faceIt = theHelper.GetAncestors( theSinuEdges[i], *mesh, TopAbs_FACE );
- while ( const TopoDS_Shape* face = faceIt->next() )
- if (( !face->IsSame( theSinuFace.Face())) &&
- ( hasComputedFace = !mesh->GetSubMesh( *face )->IsEmpty() ))
- break;
- if ( !hasComputedFace )
- sm->ComputeStateEngine( SMESH_subMesh::CLEAN );
- isComputed[i] = false;
- }
- }
+ if ( !isComputed[i] )
+ allComputed = false;
}
const SMESH_MAT2d::Branch& branch = *theMA.getBranch(0);
SMESH_MAT2d::BoundaryPoint bp[2];
- vector< std::size_t > edgeIDs1, edgeIDs2;
- vector< SMESH_MAT2d::BranchPoint > divPoints;
- branch.getOppositeGeomEdges( edgeIDs1, edgeIDs2, divPoints );
- for ( size_t i = 0; i < edgeIDs1.size(); ++i )
- if ( isComputed[ edgeIDs1[i]] &&
- isComputed[ edgeIDs2[i]])
- return false;
-
- // map param on MA to parameters of nodes on a pair of theSinuEdges
- typedef map< double, pair< NodePoint, NodePoint > > TMAPar2NPoints;
TMAPar2NPoints pointsOnE;
- vector<double> maParams;
-
- // compute params of nodes on EDGEs by projecting division points from MA
- //const double tol = 1e-5 * theMAParams.back();
- size_t iEdgePair = 0;
- while ( iEdgePair < edgeIDs1.size() )
+ // check that computed EDGEs are opposite and equally meshed
+ if ( allComputed )
{
- if ( isComputed[ edgeIDs1[ iEdgePair ]] ||
- isComputed[ edgeIDs2[ iEdgePair ]])
- {
- // "projection" from one side to the other
+ // int nbNodes[2] = { 0, 0 };
+ // for ( int iSide = 0; iSide < 2; ++iSide ) // loop on two sinuous sides
+ // nbNodes[ iSide ] += meshDS->MeshElements( theSinuFace._sinuSide[ iSide ])->NbNodes() - 1;
- size_t iEdgeComputed = edgeIDs1[iEdgePair], iSideComputed = 0;
- if ( !isComputed[ iEdgeComputed ])
- ++iSideComputed, iEdgeComputed = edgeIDs2[iEdgePair];
+ // if ( nbNodes[0] != nbNodes[1] )
+ // return false;
- map< double, const SMDS_MeshNode* > nodeParams; // params of existing nodes
- if ( !SMESH_Algo::GetSortedNodesOnEdge( meshDS, theSinuEdges[ iEdgeComputed ], /*skipMedium=*/true, nodeParams ))
- return false;
-
- SMESH_MAT2d::BoundaryPoint& bndPnt = bp[ 1-iSideComputed ];
- SMESH_MAT2d::BranchPoint brp;
- NodePoint npN, npB;
- NodePoint& np0 = iSideComputed ? npB : npN;
- NodePoint& np1 = iSideComputed ? npN : npB;
+ if ( theSinuFace.IsRing() )
+ assocNodes( theHelper, theSinuFace, theMA, pointsOnE );
+ }
+ else
+ {
+ vector< std::size_t > edgeIDs1, edgeIDs2; // indices in theSinuEdges
+ vector< SMESH_MAT2d::BranchPoint > divPoints;
+ branch.getOppositeGeomEdges( edgeIDs1, edgeIDs2, divPoints );
- double maParam1st, maParamLast, maParam;
- if ( !theMA.getBoundary().getBranchPoint( iEdgeComputed, nodeParams.begin()->first, brp ))
+ for ( size_t i = 0; i < edgeIDs1.size(); ++i )
+ if ( isComputed[ edgeIDs1[i]] &&
+ isComputed[ edgeIDs2[i]] )
+ {
+ int nbNodes1 = meshDS->MeshElements(edgeIDs[ edgeIDs1[i]] )->NbNodes();
+ int nbNodes2 = meshDS->MeshElements(edgeIDs[ edgeIDs2[i]] )->NbNodes();
+ if ( nbNodes1 != nbNodes2 )
return false;
- branch.getParameter( brp, maParam1st );
- if ( !theMA.getBoundary().getBranchPoint( iEdgeComputed, nodeParams.rbegin()->first, brp ))
+ if (( int(i)-1 >= 0 ) &&
+ ( edgeIDs1[i-1] == edgeIDs1[i] ||
+ edgeIDs2[i-1] == edgeIDs2[i] ))
return false;
- branch.getParameter( brp, maParamLast );
+ if (( i+1 < edgeIDs1.size() ) &&
+ ( edgeIDs1[i+1] == edgeIDs1[i] ||
+ edgeIDs2[i+1] == edgeIDs2[i] ))
+ return false;
+ }
+
+ // map (param on MA) to (parameters of nodes on a pair of theSinuEdges)
+ vector<double> maParams;
+ set<int> projectedEdges; // treated EDGEs which 'isComputed'
+
+ // compute params of nodes on EDGEs by projecting division points from MA
+
+ for ( size_t iEdgePair = 0; iEdgePair < edgeIDs1.size(); ++iEdgePair )
+ // loop on pairs of opposite EDGEs
+ {
+ if ( projectedEdges.count( edgeIDs1[ iEdgePair ]) ||
+ projectedEdges.count( edgeIDs2[ iEdgePair ]) )
+ continue;
- map< double, const SMDS_MeshNode* >::iterator u2n = nodeParams.begin(), u2nEnd = --nodeParams.end();
- TMAPar2NPoints::iterator end = pointsOnE.end(), pos = end;
- TMAPar2NPoints::iterator & hint = (maParamLast > maParam1st) ? end : pos;
- for ( ++u2n; u2n != u2nEnd; ++u2n )
+ // --------------------------------------------------------------------------------
+ if ( isComputed[ edgeIDs1[ iEdgePair ]] != // one EDGE is meshed
+ isComputed[ edgeIDs2[ iEdgePair ]])
{
- if ( !theMA.getBoundary().getBranchPoint( iEdgeComputed, u2n->first, brp ))
+ // "projection" from one side to the other
+
+ size_t iEdgeComputed = edgeIDs1[iEdgePair], iSideComputed = 0;
+ if ( !isComputed[ iEdgeComputed ])
+ ++iSideComputed, iEdgeComputed = edgeIDs2[iEdgePair];
+
+ map< double, const SMDS_MeshNode* > nodeParams; // params of existing nodes
+ if ( !SMESH_Algo::GetSortedNodesOnEdge( meshDS, theSinuEdges[ iEdgeComputed ], /*skipMedium=*/true, nodeParams ))
return false;
- if ( !branch.getBoundaryPoints( brp, bp[0], bp[1] ))
+
+ projectedEdges.insert( iEdgeComputed );
+
+ SMESH_MAT2d::BoundaryPoint& bndPnt = bp[ 1-iSideComputed ];
+ SMESH_MAT2d::BranchPoint brp;
+ NodePoint npN, npB; // NodePoint's initialized by node and BoundaryPoint
+ NodePoint& np0 = iSideComputed ? npB : npN;
+ NodePoint& np1 = iSideComputed ? npN : npB;
+
+ double maParam1st, maParamLast, maParam;
+ if ( !theMA.getBoundary().getBranchPoint( iEdgeComputed, nodeParams.begin()->first, brp ))
return false;
- if ( !branch.getParameter( brp, maParam ))
+ branch.getParameter( brp, maParam1st );
+ if ( !theMA.getBoundary().getBranchPoint( iEdgeComputed, nodeParams.rbegin()->first, brp ))
return false;
+ branch.getParameter( brp, maParamLast );
- npN = NodePoint( u2n->second, u2n->first, iEdgeComputed );
- npB = NodePoint( bndPnt );
- pos = pointsOnE.insert( hint, make_pair( maParam, make_pair( np0, np1 )));
+ map< double, const SMDS_MeshNode* >::iterator u2n = nodeParams.begin(), u2nEnd = nodeParams.end();
+ TMAPar2NPoints::iterator end = pointsOnE.end(), pos = end;
+ TMAPar2NPoints::iterator & hint = (maParamLast > maParam1st) ? end : pos;
+ for ( ++u2n, --u2nEnd; u2n != u2nEnd; ++u2n )
+ {
+ // point on EDGE (u2n) --> MA point (brp)
+ if ( !theMA.getBoundary().getBranchPoint( iEdgeComputed, u2n->first, brp ))
+ return false;
+ // MA point --> points on 2 EDGEs (bp)
+ if ( !branch.getBoundaryPoints( brp, bp[0], bp[1] ) ||
+ !branch.getParameter( brp, maParam ))
+ return false;
+
+ npN = NodePoint( u2n->second, u2n->first, iEdgeComputed );
+ npB = NodePoint( bndPnt );
+ pos = pointsOnE.insert( hint, make_pair( maParam, make_pair( np0, np1 )));
+ }
}
+ // --------------------------------------------------------------------------------
+ else if ( !isComputed[ edgeIDs1[ iEdgePair ]] && // none of EDGEs is meshed
+ !isComputed[ edgeIDs2[ iEdgePair ]])
+ {
+ // "projection" from MA
+ maParams.clear();
+ if ( !getParamsForEdgePair( iEdgePair, divPoints, theMAParams, maParams ))
+ return false;
- // move iEdgePair forward
- while ( iEdgePair < edgeIDs1.size() )
- if ( edgeIDs1[ iEdgePair ] == bp[0]._edgeIndex &&
- edgeIDs2[ iEdgePair ] == bp[1]._edgeIndex )
- break;
- else
- ++iEdgePair;
- }
- else
- {
- // projection from MA
- maParams.clear();
- if ( !getParamsForEdgePair( iEdgePair, divPoints, theMAParams, maParams ))
- return false;
+ for ( size_t i = 1; i < maParams.size()-1; ++i )
+ {
+ if ( !branch.getBoundaryPoints( maParams[i], bp[0], bp[1] ))
+ return false;
- for ( size_t i = 1; i < maParams.size()-1; ++i )
+ pointsOnE.insert( pointsOnE.end(), make_pair( maParams[i], make_pair( NodePoint(bp[0]),
+ NodePoint(bp[1]))));
+ }
+ }
+ // --------------------------------------------------------------------------------
+ else if ( isComputed[ edgeIDs1[ iEdgePair ]] && // equally meshed EDGES
+ isComputed[ edgeIDs2[ iEdgePair ]])
{
- if ( !branch.getBoundaryPoints( maParams[i], bp[0], bp[1] ))
+ // add existing nodes
+
+ size_t iE0 = edgeIDs1[ iEdgePair ];
+ size_t iE1 = edgeIDs2[ iEdgePair ];
+ map< double, const SMDS_MeshNode* > nodeParams[2]; // params of existing nodes
+ if ( !SMESH_Algo::GetSortedNodesOnEdge( meshDS, theSinuEdges[ iE0 ],
+ /*skipMedium=*/false, nodeParams[0] ) ||
+ !SMESH_Algo::GetSortedNodesOnEdge( meshDS, theSinuEdges[ iE1 ],
+ /*skipMedium=*/false, nodeParams[1] ) ||
+ nodeParams[0].size() != nodeParams[1].size() )
return false;
- pointsOnE.insert( pointsOnE.end(), make_pair( maParams[i], make_pair( NodePoint(bp[0]),
- NodePoint(bp[1]))));
+ if ( nodeParams[0].size() <= 2 )
+ continue; // nodes on VERTEXes only
+
+ bool reverse = ( theSinuEdges[0].Orientation() == theSinuEdges[1].Orientation() );
+ double maParam;
+ SMESH_MAT2d::BranchPoint brp;
+ std::pair< NodePoint, NodePoint > npPair;
+
+ map< double, const SMDS_MeshNode* >::iterator
+ u2n0F = ++nodeParams[0].begin(),
+ u2n1F = ++nodeParams[1].begin();
+ map< double, const SMDS_MeshNode* >::reverse_iterator
+ u2n1R = ++nodeParams[1].rbegin();
+ for ( ; u2n0F != nodeParams[0].end(); ++u2n0F )
+ {
+ if ( !theMA.getBoundary().getBranchPoint( iE0, u2n0F->first, brp ) ||
+ !branch.getParameter( brp, maParam ))
+ return false;
+
+ npPair.first = NodePoint( u2n0F->second, u2n0F->first, iE0 );
+ if ( reverse )
+ {
+ npPair.second = NodePoint( u2n1R->second, u2n1R->first, iE1 );
+ ++u2n1R;
+ }
+ else
+ {
+ npPair.second = NodePoint( u2n1F->second, u2n1F->first, iE1 );
+ ++u2n1F;
+ }
+ pointsOnE.insert( make_pair( maParam, npPair ));
+ }
}
- }
- ++iEdgePair;
- }
+ } // loop on pairs of opposite EDGEs
- if ( !projectVertices( theHelper, theMA, divPoints, edgeIDs1, edgeIDs2,
- isComputed, pointsOnE, theSinuFace ))
- return false;
+ if ( !projectVertices( theHelper, theMA, divPoints, edgeIDs1, edgeIDs2,
+ isComputed, pointsOnE, theSinuFace ))
+ return false;
- separateNodes( theHelper, pointsOnE, theSinuFace );
+ separateNodes( theHelper, theMA, pointsOnE, theSinuFace, isComputed );
- // create nodes
- TMAPar2NPoints::iterator u2np = pointsOnE.begin();
- for ( ; u2np != pointsOnE.end(); ++u2np )
- {
- NodePoint* np[2] = { & u2np->second.first, & u2np->second.second };
- for ( int iSide = 0; iSide < 2; ++iSide )
+ // create nodes
+ TMAPar2NPoints::iterator u2np = pointsOnE.begin();
+ for ( ; u2np != pointsOnE.end(); ++u2np )
{
- if ( np[ iSide ]->_node ) continue;
- size_t iEdge = np[ iSide ]->_edgeInd;
- double u = np[ iSide ]->_u;
- gp_Pnt p = curves[ iEdge ]->Value( u );
- np[ iSide ]->_node = meshDS->AddNode( p.X(), p.Y(), p.Z() );
- meshDS->SetNodeOnEdge( np[ iSide ]->_node, edgeIDs[ iEdge ], u );
+ NodePoint* np[2] = { & u2np->second.first, & u2np->second.second };
+ for ( int iSide = 0; iSide < 2; ++iSide )
+ {
+ if ( np[ iSide ]->_node ) continue;
+ size_t iEdge = np[ iSide ]->_edgeInd;
+ double u = np[ iSide ]->_u;
+ gp_Pnt p = curves[ iEdge ]->Value( u );
+ np[ iSide ]->_node = meshDS->AddNode( p.X(), p.Y(), p.Z() );
+ meshDS->SetNodeOnEdge( np[ iSide ]->_node, edgeIDs[ iEdge ], u );
+ }
}
- }
- // create mesh segments on EDGEs
- theHelper.SetElementsOnShape( false );
- TopoDS_Face face = TopoDS::Face( theHelper.GetSubShape() );
- for ( size_t i = 0; i < theSinuEdges.size(); ++i )
- {
- SMESH_subMesh* sm = mesh->GetSubMesh( theSinuEdges[i] );
- if ( sm->GetSubMeshDS() && sm->GetSubMeshDS()->NbElements() > 0 )
- continue;
+ // create mesh segments on EDGEs
+ theHelper.SetElementsOnShape( false );
+ TopoDS_Face face = TopoDS::Face( theHelper.GetSubShape() );
+ for ( size_t i = 0; i < theSinuEdges.size(); ++i )
+ {
+ SMESH_subMesh* sm = mesh->GetSubMesh( theSinuEdges[i] );
+ if ( sm->GetSubMeshDS() && sm->GetSubMeshDS()->NbElements() > 0 )
+ continue;
- StdMeshers_FaceSide side( face, theSinuEdges[i], mesh,
- /*isFwd=*/true, /*skipMediumNodes=*/true );
- vector<const SMDS_MeshNode*> nodes = side.GetOrderedNodes();
- for ( size_t in = 1; in < nodes.size(); ++in )
+ StdMeshers_FaceSide side( face, theSinuEdges[i], mesh,
+ /*isFwd=*/true, /*skipMediumNodes=*/true, &theHelper );
+ vector<const SMDS_MeshNode*> nodes = side.GetOrderedNodes();
+ for ( size_t in = 1; in < nodes.size(); ++in )
+ {
+ const SMDS_MeshElement* seg = theHelper.AddEdge( nodes[in-1], nodes[in], 0, false );
+ meshDS->SetMeshElementOnShape( seg, edgeIDs[ i ] );
+ }
+ }
+
+ // update sub-meshes on VERTEXes
+ for ( size_t i = 0; i < theSinuEdges.size(); ++i )
{
- const SMDS_MeshElement* seg = theHelper.AddEdge( nodes[in-1], nodes[in], 0, false );
- meshDS->SetMeshElementOnShape( seg, edgeIDs[ i ] );
+ mesh->GetSubMesh( theHelper.IthVertex( 0, theSinuEdges[i] ))
+ ->ComputeStateEngine( SMESH_subMesh::CHECK_COMPUTE_STATE );
+ mesh->GetSubMesh( theHelper.IthVertex( 1, theSinuEdges[i] ))
+ ->ComputeStateEngine( SMESH_subMesh::CHECK_COMPUTE_STATE );
}
}
- // update sub-meshes on VERTEXes
- for ( size_t i = 0; i < theSinuEdges.size(); ++i )
- {
- mesh->GetSubMesh( theHelper.IthVertex( 0, theSinuEdges[i] ))
- ->ComputeStateEngine( SMESH_subMesh::CHECK_COMPUTE_STATE );
- mesh->GetSubMesh( theHelper.IthVertex( 1, theSinuEdges[i] ))
- ->ComputeStateEngine( SMESH_subMesh::CHECK_COMPUTE_STATE );
- }
+ // Setup sides of a quadrangle
+ if ( !setQuadSides( theHelper, pointsOnE, theSinuFace, the1dAlgo ))
+ return false;
return true;
}
bool computeShortEdges( SMESH_MesherHelper& theHelper,
const vector<TopoDS_Edge>& theShortEdges,
- SMESH_Algo* the1dAlgo )
+ SMESH_Algo* the1dAlgo,
+ const bool theHasRadialHyp,
+ const bool /*theIs2nd*/)
{
+ SMESH_Hypothesis::Hypothesis_Status aStatus;
for ( size_t i = 0; i < theShortEdges.size(); ++i )
{
- theHelper.GetGen()->Compute( *theHelper.GetMesh(), theShortEdges[i], true, true );
+ if ( !theHasRadialHyp )
+ // use global hyps
+ theHelper.GetGen()->Compute( *theHelper.GetMesh(), theShortEdges[i],
+ SMESH_Gen::SHAPE_ONLY_UPWARD );
SMESH_subMesh* sm = theHelper.GetMesh()->GetSubMesh(theShortEdges[i] );
if ( sm->IsEmpty() )
{
+ // use 2D hyp or minSegLen
try {
+ // compute VERTEXes
+ SMESH_subMeshIteratorPtr smIt = sm->getDependsOnIterator(/*includeSelf=*/false);
+ while ( smIt->more() )
+ smIt->next()->ComputeStateEngine( SMESH_subMesh::COMPUTE );
+
+ // compute EDGE
+ the1dAlgo->CheckHypothesis( *theHelper.GetMesh(), theShortEdges[i], aStatus );
if ( !the1dAlgo->Compute( *theHelper.GetMesh(), theShortEdges[i] ))
return false;
}
const double dksi = 0.5, deta = 0.5;
const double dksi2 = dksi*dksi, deta2 = deta*deta;
double err = 0., g11, g22, g12;
- int nbErr = 0;
+ //int nbErr = 0;
FaceQuadStruct& q = *quad;
UVPtStruct pNew;
- double refArea = area( q.UVPt(0,0), q.UVPt(1,0), q.UVPt(1,1) );
+ //double refArea = area( q.UVPt(0,0), q.UVPt(1,0), q.UVPt(1,1) );
for ( int iLoop = 0; iLoop < nbLoops; ++iLoop )
{
} // namespace
+//================================================================================
+/*!
+ * \brief Sets event listener which removes mesh from EDGEs when 2D hyps change
+ */
+//================================================================================
+
+void StdMeshers_QuadFromMedialAxis_1D2D::SetEventListener(SMESH_subMesh* faceSubMesh)
+{
+ faceSubMesh->SetEventListener( new EdgeCleaner, 0, faceSubMesh );
+}
+
//================================================================================
/*!
* \brief Create quadrangle elements
*/
//================================================================================
-bool StdMeshers_QuadFromMedialAxis_1D2D::computeQuads( SMESH_MesherHelper& theHelper,
- const TopoDS_Face& theFace,
- const vector<TopoDS_Edge> theSinuEdges[2],
- const vector<TopoDS_Edge> theShortEdges[2])
+bool StdMeshers_QuadFromMedialAxis_1D2D::computeQuads( SMESH_MesherHelper& theHelper,
+ FaceQuadStruct::Ptr theQuad)
{
- SMESH_Mesh* mesh = theHelper.GetMesh();
- SMESH_ProxyMesh::Ptr proxyMesh = StdMeshers_ViscousLayers2D::Compute( *mesh, theFace );
- if ( !proxyMesh )
- return false;
-
- StdMeshers_Quadrangle_2D::myProxyMesh = proxyMesh;
StdMeshers_Quadrangle_2D::myHelper = &theHelper;
StdMeshers_Quadrangle_2D::myNeedSmooth = false;
StdMeshers_Quadrangle_2D::myCheckOri = false;
StdMeshers_Quadrangle_2D::myQuadList.clear();
- // fill FaceQuadStruct
-
- list< TopoDS_Edge > side[4];
- side[0].insert( side[0].end(), theShortEdges[0].begin(), theShortEdges[0].end() );
- side[1].insert( side[1].end(), theSinuEdges[1].begin(), theSinuEdges[1].end() );
- side[2].insert( side[2].end(), theShortEdges[1].begin(), theShortEdges[1].end() );
- side[3].insert( side[3].end(), theSinuEdges[0].begin(), theSinuEdges[0].end() );
-
- FaceQuadStruct::Ptr quad( new FaceQuadStruct );
- quad->side.resize( 4 );
- quad->face = theFace;
- for ( int i = 0; i < 4; ++i )
- {
- quad->side[i] = StdMeshers_FaceSide::New( theFace, side[i], mesh, i < QUAD_TOP_SIDE,
- /*skipMediumNodes=*/true, proxyMesh );
- }
- int nbNodesShort0 = quad->side[0].NbPoints();
- int nbNodesShort1 = quad->side[2].NbPoints();
+ int nbNodesShort0 = theQuad->side[0].NbPoints();
+ int nbNodesShort1 = theQuad->side[2].NbPoints();
+ int nbNodesSinu0 = theQuad->side[1].NbPoints();
+ int nbNodesSinu1 = theQuad->side[3].NbPoints();
// compute UV of internal points
- myQuadList.push_back( quad );
- if ( !StdMeshers_Quadrangle_2D::setNormalizedGrid( quad ))
- return false;
+ myQuadList.push_back( theQuad );
+ // if ( !StdMeshers_Quadrangle_2D::setNormalizedGrid( theQuad ))
+ // return false;
// elliptic smooth of internal points to get boundary cell normal to the boundary
- ellipticSmooth( quad, 1 );
-
+ bool isRing = theQuad->side[0].grid->Edge(0).IsNull();
+ if ( !isRing ) {
+ if ( !StdMeshers_Quadrangle_2D::setNormalizedGrid( theQuad ))
+ return false;
+ ellipticSmooth( theQuad, 1 );
+ }
// create quadrangles
bool ok;
- if ( nbNodesShort0 == nbNodesShort1 )
- ok = StdMeshers_Quadrangle_2D::computeQuadDominant( *mesh, theFace, quad );
+ theHelper.SetElementsOnShape( true );
+ if ( nbNodesShort0 == nbNodesShort1 && nbNodesSinu0 == nbNodesSinu1 )
+ ok = StdMeshers_Quadrangle_2D::computeQuadDominant( *theHelper.GetMesh(),
+ theQuad->face, theQuad );
else
- ok = StdMeshers_Quadrangle_2D::computeTriangles( *mesh, theFace, quad );
+ ok = StdMeshers_Quadrangle_2D::computeTriangles( *theHelper.GetMesh(),
+ theQuad->face, theQuad );
- StdMeshers_Quadrangle_2D::myProxyMesh.reset();
StdMeshers_Quadrangle_2D::myHelper = 0;
return ok;
if ( getSinuousEdges( helper, sinuFace ))
{
- _progress = 0.2;
-
- // if ( sinuFace._sinuEdges.size() > 2 )
- // return error(COMPERR_BAD_SHAPE, "Not yet supported case" );
+ _progress = 0.4;
double minSegLen = getMinSegLen( helper, sinuFace._sinuEdges );
SMESH_MAT2d::MedialAxis ma( F, sinuFace._sinuEdges, minSegLen, /*ignoreCorners=*/true );
if ( !_regular1D )
- _regular1D = new Algo1D( _studyId, _gen );
+ _regular1D = new Algo1D( _gen );
_regular1D->SetSegmentLength( minSegLen );
vector<double> maParams;
if ( ! divideMA( helper, ma, sinuFace, _regular1D, minSegLen, maParams ))
return error(COMPERR_BAD_SHAPE);
- _progress = 0.4;
+ _progress = 0.8;
+ if ( _hyp2D )
+ _regular1D->SetRadialDistribution( _hyp2D );
- if ( !computeShortEdges( helper, sinuFace._shortSide[0], _regular1D ) ||
- !computeShortEdges( helper, sinuFace._shortSide[1], _regular1D ))
+ if ( !computeShortEdges( helper, sinuFace._shortSide[0], _regular1D, _hyp2D, 0 ) ||
+ !computeShortEdges( helper, sinuFace._shortSide[1], _regular1D, _hyp2D, 1 ))
return error("Failed to mesh short edges");
- _progress = 0.6;
+ _progress = 0.85;
- if ( !computeSinuEdges( helper, minSegLen, ma, maParams, sinuFace ))
+ if ( !computeSinuEdges( helper, minSegLen, ma, maParams, sinuFace, _regular1D ))
return error("Failed to mesh sinuous edges");
- _progress = 0.8;
+ _progress = 0.9;
- bool ok = computeQuads( helper, F, sinuFace._sinuSide, sinuFace._shortSide );
+ bool ok = computeQuads( helper, sinuFace._quad );
if ( ok )
mergeNodes( helper, sinuFace );
return StdMeshers_Quadrangle_2D::Evaluate(theMesh,theShape,theResMap);
}
+//================================================================================
+/*!
+ * \brief Return true if the algorithm can mesh this shape
+ * \param [in] aShape - shape to check
+ * \param [in] toCheckAll - if true, this check returns OK if all shapes are OK,
+ * else, returns OK if at least one shape is OK
+ */
+//================================================================================
+
+bool StdMeshers_QuadFromMedialAxis_1D2D::IsApplicable( const TopoDS_Shape & aShape,
+ bool toCheckAll )
+{
+ TmpMesh tmpMesh;
+ SMESH_MesherHelper helper( tmpMesh );
+
+ int nbFoundFaces = 0;
+ for (TopExp_Explorer exp( aShape, TopAbs_FACE ); exp.More(); exp.Next(), ++nbFoundFaces )
+ {
+ const TopoDS_Face& face = TopoDS::Face( exp.Current() );
+ SinuousFace sinuFace( face );
+ bool isApplicable = getSinuousEdges( helper, sinuFace );
+
+ if ( toCheckAll && !isApplicable ) return false;
+ if ( !toCheckAll && isApplicable ) return true;
+ }
+ return ( toCheckAll && nbFoundFaces != 0 );
+}
+