-// Copyright (C) 2007-2012 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2020 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
-// SMESH SMESH : idl implementation based on 'SMESH' unit's calsses
+// SMESH SMESH : idl implementation based on 'SMESH' unit's classes
// File : StdMeshers_ProjectionUtils.cxx
// Created : Fri Oct 27 10:24:28 2006
// Author : Edward AGAPOV (eap)
//
#include "StdMeshers_ProjectionUtils.hxx"
-#include "StdMeshers_ProjectionSource1D.hxx"
-#include "StdMeshers_ProjectionSource2D.hxx"
-#include "StdMeshers_ProjectionSource3D.hxx"
-
+#include "SMDS_EdgePosition.hxx"
+#include "SMDS_FacePosition.hxx"
+#include "SMESHDS_Mesh.hxx"
#include "SMESH_Algo.hxx"
#include "SMESH_Block.hxx"
#include "SMESH_Gen.hxx"
+#include "SMESH_HypoFilter.hxx"
#include "SMESH_Hypothesis.hxx"
#include "SMESH_Mesh.hxx"
+#include "SMESH_MeshAlgos.hxx"
+#include "SMESH_MeshEditor.hxx"
#include "SMESH_MesherHelper.hxx"
#include "SMESH_subMesh.hxx"
#include "SMESH_subMeshEventListener.hxx"
-#include "SMDS_EdgePosition.hxx"
+#include "StdMeshers_ProjectionSource1D.hxx"
+#include "StdMeshers_ProjectionSource2D.hxx"
+#include "StdMeshers_ProjectionSource3D.hxx"
#include "utilities.h"
#include <BRepAdaptor_Surface.hxx>
+#include <BRepMesh_Delaun.hxx>
#include <BRepTools.hxx>
#include <BRepTools_WireExplorer.hxx>
#include <BRep_Builder.hxx>
#include <BRep_Tool.hxx>
#include <Bnd_Box.hxx>
+#include <Geom2d_Curve.hxx>
+#include <Geom_Curve.hxx>
#include <TopAbs.hxx>
#include <TopExp.hxx>
#include <TopExp_Explorer.hxx>
#include <TopoDS_Shape.hxx>
#include <gp_Pnt.hxx>
#include <gp_Vec.hxx>
+#include <math_Gauss.hxx>
#include <numeric>
+#include <limits>
using namespace std;
#define RETURN_BAD_RESULT(msg) { MESSAGE(")-: Error: " << msg); return false; }
#define CONT_BAD_RESULT(msg) { MESSAGE(")-: Error: " << msg); continue; }
#define SHOW_SHAPE(v,msg) \
-// { \
-// if ( (v).IsNull() ) cout << msg << " NULL SHAPE" << endl; \
-// else if ((v).ShapeType() == TopAbs_VERTEX) {\
-// gp_Pnt p = BRep_Tool::Pnt( TopoDS::Vertex( (v) ));\
-// cout<<msg<<" "<<shapeIndex((v))<<" ( "<<p.X()<<", "<<p.Y()<<", "<<p.Z()<<" )"<<endl;} \
-// else {\
-// cout << msg << " "; TopAbs::Print((v).ShapeType(),cout) <<" "<<shapeIndex((v))<<endl;}\
-// }
+ // { show_shape((v),(msg)); }
#define SHOW_LIST(msg,l) \
-// { \
-// cout << msg << " ";\
-// list< TopoDS_Edge >::const_iterator e = l.begin();\
-// for ( int i = 0; e != l.end(); ++e, ++i ) {\
-// cout << i << "V (" << TopExp::FirstVertex( *e, true ).TShape().operator->() << ") "\
-// << i << "E (" << e->TShape().operator->() << "); "; }\
-// cout << endl;\
-// }
+ // { show_list((msg),(l)); }
-#define HERE StdMeshers_ProjectionUtils
+namespace HERE = StdMeshers_ProjectionUtils;
namespace {
- static SMESHDS_Mesh* theMeshDS[2] = { 0, 0 }; // used to debug only
+ static SMESHDS_Mesh* theMeshDS[2] = { 0, 0 }; // used for debug only
long shapeIndex(const TopoDS_Shape& S)
{
if ( theMeshDS[0] && theMeshDS[1] )
return max(theMeshDS[0]->ShapeToIndex(S), theMeshDS[1]->ShapeToIndex(S) );
return long(S.TShape().operator->());
}
-
+ void show_shape( TopoDS_Shape v, const char* msg ) // debug
+ {
+ if ( v.IsNull() ) cout << msg << " NULL SHAPE" << endl;
+ else if (v.ShapeType() == TopAbs_VERTEX) {
+ gp_Pnt p = BRep_Tool::Pnt( TopoDS::Vertex( v ));
+ cout<<msg<<" "<<shapeIndex((v))<<" ( "<<p.X()<<", "<<p.Y()<<", "<<p.Z()<<" )"<<endl;}
+ else {
+ cout << msg << " "; TopAbs::Print((v).ShapeType(),cout) <<" "<<shapeIndex((v))<<endl;}
+ }
+ void show_list( const char* msg, const list< TopoDS_Edge >& l ) // debug
+ {
+ cout << msg << " ";
+ list< TopoDS_Edge >::const_iterator e = l.begin();
+ for ( int i = 0; e != l.end(); ++e, ++i ) {
+ cout << i << "V (" << TopExp::FirstVertex( *e, true ).TShape().operator->() << ") "
+ << i << "E (" << e->TShape().operator->() << "); "; }
+ cout << endl;
+ }
//================================================================================
/*!
* \brief Write shape for debug purposes
*/
//================================================================================
- bool _StoreBadShape(const TopoDS_Shape& shape)
+ bool storeShapeForDebug(const TopoDS_Shape& shape)
{
#ifdef _DEBUG_
const char* type[] ={"COMPOUND","COMPSOLID","SOLID","SHELL","FACE","WIRE","EDGE","VERTEX"};
BRepTools::Write( shape, SMESH_Comment("/tmp/") << type[shape.ShapeType()] << "_"
<< shape.TShape().operator->() << ".brep");
+ if ( !theMeshDS[0] ) {
+ show_shape( TopoDS_Shape(), "avoid warning: show_shape() defined but not used");
+ show_list( "avoid warning: show_list() defined but not used", list< TopoDS_Edge >() );
+ }
#endif
return false;
}
*/
//================================================================================
- void Reverse( list< TopoDS_Edge > & edges, const int nbEdges, const int firstEdge=0)
+ void reverseEdges( list< TopoDS_Edge > & edges, const int nbEdges, const int firstEdge=0)
{
SHOW_LIST("BEFORE REVERSE", edges);
*/
//================================================================================
- bool IsPropagationPossible( SMESH_Mesh* theMesh1, SMESH_Mesh* theMesh2 )
+ bool isPropagationPossible( SMESH_Mesh* theMesh1, SMESH_Mesh* theMesh2 )
{
if ( theMesh1 != theMesh2 ) {
TopoDS_Shape mainShape1 = theMesh1->GetMeshDS()->ShapeToMesh();
*/
//================================================================================
- bool FixAssocByPropagation( const int nbEdges,
+ bool fixAssocByPropagation( const int nbEdges,
list< TopoDS_Edge > & edges1,
list< TopoDS_Edge > & edges2,
SMESH_Mesh* theMesh1,
SMESH_Mesh* theMesh2)
{
- if ( nbEdges == 2 && IsPropagationPossible( theMesh1, theMesh2 ) )
+ if ( nbEdges == 2 && isPropagationPossible( theMesh1, theMesh2 ) )
{
list< TopoDS_Edge >::iterator eIt2 = ++edges2.begin(); // 2nd edge of the 2nd face
TopoDS_Edge edge2 = HERE::GetPropagationEdge( theMesh1, *eIt2, edges1.front() ).second;
if ( !edge2.IsNull() ) { // propagation found for the second edge
- Reverse( edges2, nbEdges );
+ reverseEdges( edges2, nbEdges );
return true;
}
}
return false;
}
+ //================================================================================
+ /*!
+ * \brief Associate faces having one edge in the outer wire.
+ * No check is done if there is really only one outer edge
+ */
+ //================================================================================
+
+ bool assocFewEdgesFaces( const TopoDS_Face& face1,
+ SMESH_Mesh* mesh1,
+ const TopoDS_Face& face2,
+ SMESH_Mesh* mesh2,
+ HERE::TShapeShapeMap & theMap)
+ {
+ TopoDS_Vertex v1 = TopoDS::Vertex( HERE::OuterShape( face1, TopAbs_VERTEX ));
+ TopoDS_Vertex v2 = TopoDS::Vertex( HERE::OuterShape( face2, TopAbs_VERTEX ));
+ TopoDS_Vertex VV1[2] = { v1, v1 };
+ TopoDS_Vertex VV2[2] = { v2, v2 };
+ list< TopoDS_Edge > edges1, edges2;
+ if ( int nbE = HERE::FindFaceAssociation( face1, VV1, face2, VV2, edges1, edges2 ))
+ {
+ HERE::InsertAssociation( face1, face2, theMap );
+ fixAssocByPropagation( nbE, edges1, edges2, mesh1, mesh2 );
+ list< TopoDS_Edge >::iterator eIt1 = edges1.begin();
+ list< TopoDS_Edge >::iterator eIt2 = edges2.begin();
+ for ( ; eIt1 != edges1.end(); ++eIt1, ++eIt2 )
+ {
+ HERE::InsertAssociation( *eIt1, *eIt2, theMap );
+ v1 = SMESH_MesherHelper::IthVertex( 0, *eIt1 );
+ v2 = SMESH_MesherHelper::IthVertex( 0, *eIt2 );
+ HERE::InsertAssociation( v1, v2, theMap );
+ }
+ theMap.SetAssocType( HERE::TShapeShapeMap::FEW_EF );
+ return true;
+ }
+ return false;
+ }
+
//================================================================================
/*!
* \brief Look for a group containing a target shape and similar to a source group
*/
//================================================================================
- TopoDS_Shape FindGroupContaining(const TopoDS_Shape& tgtShape,
+ TopoDS_Shape findGroupContaining(const TopoDS_Shape& tgtShape,
const SMESH_Mesh* tgtMesh1,
const TopoDS_Shape& srcGroup)
{
list<SMESH_subMesh*> subMeshes = tgtMesh1->GetGroupSubMeshesContaining(tgtShape);
list<SMESH_subMesh*>::iterator sm = subMeshes.begin();
int type, last = TopAbs_SHAPE;
- StdMeshers_ProjectionUtils util;
for ( ; sm != subMeshes.end(); ++sm ) {
const TopoDS_Shape & group = (*sm)->GetSubShape();
// check if group is similar to srcGroup
for ( type = srcGroup.ShapeType(); type < last; ++type)
- if ( util.Count( srcGroup, (TopAbs_ShapeEnum)type, 0) !=
- util.Count( group, (TopAbs_ShapeEnum)type, 0))
+ if ( SMESH_MesherHelper::Count( srcGroup, (TopAbs_ShapeEnum)type, 0) !=
+ SMESH_MesherHelper::Count( group, (TopAbs_ShapeEnum)type, 0))
break;
if ( type == last )
return group;
*/
//================================================================================
- bool AssocGroupsByPropagation(const TopoDS_Shape& theGroup1,
+ bool assocGroupsByPropagation(const TopoDS_Shape& theGroup1,
const TopoDS_Shape& theGroup2,
SMESH_Mesh& theMesh,
HERE::TShapeShapeMap& theMap)
// get edges of the face
TopoDS_Edge edgeGr1, edgeGr2, verticEdge2;
list< TopoDS_Edge > edges; list< int > nbEdgesInWire;
- SMESH_Block::GetOrderedEdges( face, v1, edges, nbEdgesInWire);
+ SMESH_Block::GetOrderedEdges( face, edges, nbEdgesInWire, v1);
if ( nbEdgesInWire.front() != 4 )
- return _StoreBadShape( face );
+ return storeShapeForDebug( face );
list< TopoDS_Edge >::iterator edge = edges.begin();
if ( verticEdge.IsSame( *edge )) {
edgeGr2 = *(++edge);
if ( gr1It.Value().ShapeType() == TopAbs_FACE )
{
// find a boundary edge of group1 to start from
- TopoDS_Shape bndEdge = StdMeshers_ProjectionUtils::GetBoundaryEdge( theGroup1, theMesh );
+ TopoDS_Shape bndEdge = HERE::GetBoundaryEdge( theGroup1, theMesh );
if ( bndEdge.IsNull() )
return false;
}
}
}
+ theMap.SetAssocType( HERE::TShapeShapeMap::PROPAGATION );
return true;
}
const gp_Pnt2d& uv,
const double& tol2d )
{
- TopoDS_Vertex VV[2];
- TopExp::Vertices( edge, VV[0], VV[1], true);
- gp_Pnt2d v1UV = BRep_Tool::Parameters( VV[vIndex], face);
+ TopoDS_Vertex V = SMESH_MesherHelper::IthVertex( vIndex, edge, /*CumOri=*/true );
+ gp_Pnt2d v1UV = BRep_Tool::Parameters( V, face);
double dist2d = v1UV.Distance( uv );
return dist2d < tol2d;
}
*/
//================================================================================
- TopoDS_Shape getOuterEdge( const TopoDS_Shape theShape1, SMESH_Mesh& mesh )
+ bool getOuterEdges( const TopoDS_Shape shape,
+ SMESH_Mesh& mesh,
+ std::list< TopoDS_Edge >& allBndEdges )
{
- TopoDS_Shape edge;
- if ( theShape1.ShapeType() == TopAbs_COMPOUND )
+ if ( shape.ShapeType() == TopAbs_COMPOUND )
{
- TopoDS_Iterator it( theShape1 );
- if ( it.Value().ShapeType() == TopAbs_FACE ) // group of FACEs
+ TopoDS_Iterator it( shape );
+ if ( it.More() && it.Value().ShapeType() == TopAbs_FACE ) // group of FACEs
{
// look for a boundary EDGE of a group
- edge = StdMeshers_ProjectionUtils::GetBoundaryEdge( theShape1, mesh );
- if ( !edge.IsNull() )
- return edge;
+ StdMeshers_ProjectionUtils::GetBoundaryEdge( shape, mesh, &allBndEdges );
+ if ( !allBndEdges.empty() )
+ return true;
}
}
- edge = theShape1;
- TopExp_Explorer expF( theShape1, TopAbs_FACE ), expE;
+ SMESH_MesherHelper helper( mesh );
+ helper.SetSubShape( shape );
+
+ TopExp_Explorer expF( shape, TopAbs_FACE ), expE;
if ( expF.More() ) {
for ( ; expF.More(); expF.Next() ) {
- edge.Nullify();
TopoDS_Shape wire =
StdMeshers_ProjectionUtils::OuterShape( TopoDS::Face( expF.Current() ), TopAbs_WIRE );
- for ( expE.Init( wire, TopAbs_EDGE ); edge.IsNull() && expE.More(); expE.Next() )
- if ( !SMESH_MesherHelper::IsClosedEdge( TopoDS::Edge( expE.Current() )))
- edge = expE.Current();
- if ( !edge.IsNull() )
- break;
+ for ( expE.Init( wire, TopAbs_EDGE ); expE.More(); expE.Next() )
+ if ( ! helper.IsClosedEdge( TopoDS::Edge( expE.Current() )))
+ {
+ if ( helper.IsSeamShape( expE.Current() ))
+ allBndEdges.push_back( TopoDS::Edge( expE.Current() ));
+ else
+ allBndEdges.push_front( TopoDS::Edge( expE.Current() ));
+ }
}
- } else if (edge.ShapeType() != TopAbs_EDGE) { // no faces
- edge.Nullify();
- for ( expE.Init( theShape1, TopAbs_EDGE ); edge.IsNull() && expE.More(); expE.Next() )
- if ( !SMESH_MesherHelper::IsClosedEdge( TopoDS::Edge( expE.Current() )))
- edge = expE.Current();
}
- return edge;
+ else if ( shape.ShapeType() != TopAbs_EDGE) { // no faces
+ for ( expE.Init( shape, TopAbs_EDGE ); expE.More(); expE.Next() )
+ if ( ! helper.IsClosedEdge( TopoDS::Edge( expE.Current() )))
+ {
+ if ( helper.IsSeamShape( expE.Current() ))
+ allBndEdges.push_back( TopoDS::Edge( expE.Current() ));
+ else
+ allBndEdges.push_front( TopoDS::Edge( expE.Current() ));
+ }
+ }
+ else if ( shape.ShapeType() == TopAbs_EDGE ) {
+ if ( ! helper.IsClosedEdge( TopoDS::Edge( shape )))
+ allBndEdges.push_back( TopoDS::Edge( shape ));
+ }
+ return !allBndEdges.empty();
}
+ /*!
+ * \brief Converter used in Delaunay constructor
+ */
+ struct SideVector2UVPtStructVec
+ {
+ std::vector< const UVPtStructVec* > _uvVecs;
+
+ SideVector2UVPtStructVec( const TSideVector& wires )
+ {
+ _uvVecs.resize( wires.size() );
+ for ( size_t i = 0; i < wires.size(); ++i )
+ _uvVecs[ i ] = & wires[i]->GetUVPtStruct();
+ }
+
+ operator const std::vector< const UVPtStructVec* > & () const
+ {
+ return _uvVecs;
+ }
+ };
+
} // namespace
//=======================================================================
-/*!
- * \brief Looks for association of all sub-shapes of two shapes
- * \param theShape1 - target shape
- * \param theMesh1 - mesh built on shape 1
- * \param theShape2 - source shape
- * \param theMesh2 - mesh built on shape 2
- * \param theAssociation - association map to be filled that may
- * contain association of one or two pairs of vertices
- * \retval bool - true if association found
+/*
+ * Looks for association of all sub-shapes of two shapes
+ * \param theShape1 - target shape
+ * \param theMesh1 - mesh built on shape 1
+ * \param theShape2 - source shape
+ * \param theMesh2 - mesh built on shape 2
+ * \param theAssociation - association map to be filled that may
+ * contain association of one or two pairs of vertices
+ * \retval bool - true if association found
*/
//=======================================================================
TShapeShapeMap & theMap)
{
// Structure of this long function is following
- // 1) Group->group projection: theShape1 is a group member,
- // theShape2 is a group. We find a group theShape1 is in and recall self.
+ // 1) Group -> Group projection: theShape1 is a group member,
+ // theShape2 is another group. We find the group theShape1 is in and recall self.
// 2) Accosiate same shapes with different location (partners).
- // 3) If vertex association is given, perform accosiation according to shape type:
+ // 3) If vertex association is given, perform association according to shape type:
// switch ( ShapeType ) {
// case TopAbs_EDGE:
// case ...:
// =================================================================================
// 1) Is it the case of associating a group member -> another group? (PAL16202, 16203)
// =================================================================================
- if ( theShape1.ShapeType() != theShape2.ShapeType() ) {
+ if ( theShape1.ShapeType() != theShape2.ShapeType() )
+ {
TopoDS_Shape group1, group2;
if ( theShape1.ShapeType() == TopAbs_COMPOUND ) {
group1 = theShape1;
- group2 = FindGroupContaining( theShape2, theMesh2, group1 );
+ group2 = findGroupContaining( theShape2, theMesh2, group1 );
}
else if ( theShape2.ShapeType() == TopAbs_COMPOUND ) {
group2 = theShape2;
- group1 = FindGroupContaining( theShape1, theMesh1, group2 );
+ group1 = findGroupContaining( theShape1, theMesh1, group2 );
}
if ( group1.IsNull() || group2.IsNull() )
RETURN_BAD_RESULT("Different shape types");
TShapePairsList::iterator s1_s2 = shapesQueue.begin();
for ( ; s1_s2 != shapesQueue.end(); ++s1_s2 )
{
+ if ( theMap.IsBound( s1_s2->first )) // avoid re-binding for a seam edge
+ continue; // to avoid this: Forward seam -> Reversed seam
InsertAssociation( s1_s2->first, s1_s2->second, theMap );
TopoDS_Iterator s1It( s1_s2->first), s2It( s1_s2->second );
for ( ; s1It.More(); s1It.Next(), s2It.Next() )
shapesQueue.push_back( make_pair( s1It.Value(), s2It.Value() ));
}
+ theMap.SetAssocType( TShapeShapeMap::PARTNER );
return true;
}
//======================================================================
// 3) HAS initial vertex association
//======================================================================
+ bool isVCloseness = ( theMap._assocType == TShapeShapeMap::CLOSE_VERTEX );
+ theMap.SetAssocType( TShapeShapeMap::INIT_VERTEX );
switch ( theShape1.ShapeType() ) {
// ----------------------------------------------------------------------
case TopAbs_EDGE: { // TopAbs_EDGE
// ----------------------------------------------------------------------
- if ( theMap.Extent() != 2 )
+ if ( theMap.Extent() != 1 )
RETURN_BAD_RESULT("Wrong map extent " << theMap.Extent() );
TopoDS_Edge edge1 = TopoDS::Edge( theShape1 );
TopoDS_Edge edge2 = TopoDS::Edge( theShape2 );
}
}
list< TopoDS_Edge > edges1, edges2;
- int nbE = FindFaceAssociation( face1, VV1, face2, VV2, edges1, edges2 );
+ int nbE = FindFaceAssociation( face1, VV1, face2, VV2, edges1, edges2, isVCloseness );
if ( !nbE ) RETURN_BAD_RESULT("FindFaceAssociation() failed");
- FixAssocByPropagation( nbE, edges1, edges2, theMesh1, theMesh2 );
+ fixAssocByPropagation( nbE, edges1, edges2, theMesh1, theMesh2 );
list< TopoDS_Edge >::iterator eIt1 = edges1.begin();
list< TopoDS_Edge >::iterator eIt2 = edges2.begin();
RETURN_BAD_RESULT("edge2 does not belong to theShape2");
}
//
- // Look for 2 corresponing faces:
+ // Look for 2 corresponding faces:
//
TopoDS_Shape F1, F2;
// get a face sharing edge1 (F1)
- TopoDS_Shape FF2[2];
TopTools_ListIteratorOfListOfShape ancestIt1( edgeToFace1.FindFromKey( edge1 ));
for ( ; F1.IsNull() && ancestIt1.More(); ancestIt1.Next() )
if ( ancestIt1.Value().ShapeType() == TopAbs_FACE )
- F1 = ancestIt1.Value().Oriented( TopAbs_FORWARD );
+ F1 = ancestIt1.Value().Oriented //( TopAbs_FORWARD );
+ ( SMESH_MesherHelper::GetSubShapeOri( theShape1, ancestIt1.Value() ));
if ( F1.IsNull() )
RETURN_BAD_RESULT(" Face1 not found");
// get 2 faces sharing edge2 (one of them is F2)
+ TopoDS_Shape FF2[2];
TopTools_ListIteratorOfListOfShape ancestIt2( edgeToFace2.FindFromKey( edge2 ));
for ( int i = 0; FF2[1].IsNull() && ancestIt2.More(); ancestIt2.Next() )
if ( ancestIt2.Value().ShapeType() == TopAbs_FACE )
- FF2[ i++ ] = ancestIt2.Value().Oriented( TopAbs_FORWARD );
+ FF2[ i++ ] = ancestIt2.Value().Oriented // ( TopAbs_FORWARD );
+ ( SMESH_MesherHelper::GetSubShapeOri( theShape2, ancestIt2.Value() ));
// get oriented edge1 and edge2 from F1 and FF2[0]
for ( exp.Init( F1, TopAbs_EDGE ); exp.More(); exp.Next() )
F2 = FF2[ 1 ];
}
- TopTools_MapOfShape boundEdges;
-
// association of face sub-shapes and neighbour faces
list< pair < TopoDS_Face, TopoDS_Edge > > FE1, FE2;
list< pair < TopoDS_Face, TopoDS_Edge > >::iterator fe1, fe2;
TopExp::Vertices( edge1, VV1[0], VV1[1], true );
TopExp::Vertices( edge2, VV2[0], VV2[1], true );
list< TopoDS_Edge > edges1, edges2;
- int nbE = FindFaceAssociation( face1, VV1, face2, VV2, edges1, edges2 );
+ int nbE = FindFaceAssociation( face1, VV1, face2, VV2, edges1, edges2, isVCloseness );
if ( !nbE ) RETURN_BAD_RESULT("FindFaceAssociation() failed");
InsertAssociation( face1, face2, theMap ); // assoc faces
- MESSAGE("Assoc FACE " << theMesh1->GetMeshDS()->ShapeToIndex( face1 )<<
- " to " << theMesh2->GetMeshDS()->ShapeToIndex( face2 ));
+ // MESSAGE("Assoc FACE " << theMesh1->GetMeshDS()->ShapeToIndex( face1 )<<
+ // " to " << theMesh2->GetMeshDS()->ShapeToIndex( face2 ));
if ( nbE == 2 && (edge1.IsSame( edges1.front())) != (edge2.IsSame( edges2.front())))
{
- Reverse( edges2, nbE );
+ reverseEdges( edges2, nbE );
}
list< TopoDS_Edge >::iterator eIt1 = edges1.begin();
list< TopoDS_Edge >::iterator eIt2 = edges2.begin();
for ( ; eIt1 != edges1.end(); ++eIt1, ++eIt2 )
{
- if ( !boundEdges.Add( *eIt1 )) continue; // already associated
- InsertAssociation( *eIt1, *eIt2, theMap ); // assoc edges
- MESSAGE("Assoc edge " << theMesh1->GetMeshDS()->ShapeToIndex( *eIt1 )<<
- " to " << theMesh2->GetMeshDS()->ShapeToIndex( *eIt2 ));
+ if ( !InsertAssociation( *eIt1, *eIt2, theMap )) // assoc edges
+ continue; // already associated
VV1[0] = TopExp::FirstVertex( *eIt1, true );
VV2[0] = TopExp::FirstVertex( *eIt2, true );
InsertAssociation( VV1[0], VV2[0], theMap ); // assoc vertices
- MESSAGE("Assoc vertex " << theMesh1->GetMeshDS()->ShapeToIndex( VV1[0] )<<
- " to " << theMesh2->GetMeshDS()->ShapeToIndex( VV2[0] ));
// add adjacent faces to process
TopoDS_Face nextFace1 = GetNextFace( edgeToFace1, *eIt1, face1 );
TopoDS_Face nextFace2 = GetNextFace( edgeToFace2, *eIt2, face2 );
if ( !nextFace1.IsNull() && !nextFace2.IsNull() ) {
+ if ( SMESH_MesherHelper::GetSubShapeOri( nextFace1, *eIt1 ) == eIt1->Orientation() )
+ nextFace1.Reverse();
+ if ( SMESH_MesherHelper::GetSubShapeOri( nextFace2, *eIt2 ) == eIt2->Orientation() )
+ nextFace2.Reverse();
FE1.push_back( make_pair( nextFace1, *eIt1 ));
FE2.push_back( make_pair( nextFace2, *eIt2 ));
}
// Maybe groups contain only one member
TopoDS_Iterator it1( theShape1 ), it2( theShape2 );
TopAbs_ShapeEnum memberType = it1.Value().ShapeType();
- int nbMembers = Count( theShape1, memberType, true );
+ int nbMembers = SMESH_MesherHelper::Count( theShape1, memberType, true );
if ( nbMembers == 0 ) return true;
if ( nbMembers == 1 ) {
return FindSubShapeAssociation( it1.Value(), theMesh1, it2.Value(), theMesh2, theMap );
if ( groupEdges[ is2ndGroup ].Contains( f.Current() ))
if ( ++nbGroupEdges > 1 )
break;
- bool add = (nbGroupEdges > 1 || Count( face, TopAbs_EDGE, true ) == 1 );
+ bool add = (nbGroupEdges > 1 ||
+ SMESH_MesherHelper::Count( face, TopAbs_EDGE, true ) == 1 );
if ( !add ) {
add = true;
for ( TopExp_Explorer v( face, TopAbs_VERTEX ); add && v.More(); v.Next())
}
// Associate shells
//
- int nbFaces1 = Count( shell1, TopAbs_FACE, 0 );
- int nbFaces2 = Count( shell2, TopAbs_FACE, 0 );
+ int nbFaces1 = SMESH_MesherHelper::Count( shell1, TopAbs_FACE, 0 );
+ int nbFaces2 = SMESH_MesherHelper::Count( shell2, TopAbs_FACE, 0 );
if ( nbFaces1 != nbFaces2 )
RETURN_BAD_RESULT("Different nb of faces found for shells");
if ( nbFaces1 > 0 ) {
v2e[0].UnBind( V[0] );
v2e[1].UnBind( V[1] );
InsertAssociation( e0, e1, theMap );
- MESSAGE("Assoc edge " << theMesh1->GetMeshDS()->ShapeToIndex( e0 )<<
- " to " << theMesh2->GetMeshDS()->ShapeToIndex( e1 ));
+ // MESSAGE("Assoc edge " << theMesh1->GetMeshDS()->ShapeToIndex( e0 )<<
+ // " to " << theMesh2->GetMeshDS()->ShapeToIndex( e1 ));
V[0] = GetNextVertex( e0, V[0] );
V[1] = GetNextVertex( e1, V[1] );
if ( !V[0].IsNull() ) {
InsertAssociation( V[0], V[1], theMap );
- MESSAGE("Assoc vertex " << theMesh1->GetMeshDS()->ShapeToIndex( V[0] )<<
- " to " << theMesh2->GetMeshDS()->ShapeToIndex( V[1] ));
+ // MESSAGE("Assoc vertex " << theMesh1->GetMeshDS()->ShapeToIndex( V[0] )<<
+ // " to " << theMesh2->GetMeshDS()->ShapeToIndex( V[1] ));
}
}
else if ( nbE0 == 2 )
InsertAssociation( e0b, e1b, theMap );
InsertAssociation( e0n, e1n, theMap );
InsertAssociation( v0n, v1n, theMap );
- MESSAGE("Assoc edge " << theMesh1->GetMeshDS()->ShapeToIndex( e0b )<<
- " to " << theMesh2->GetMeshDS()->ShapeToIndex( e1b ));
- MESSAGE("Assoc edge " << theMesh1->GetMeshDS()->ShapeToIndex( e0n )<<
- " to " << theMesh2->GetMeshDS()->ShapeToIndex( e1n ));
- MESSAGE("Assoc vertex " << theMesh1->GetMeshDS()->ShapeToIndex( v0n )<<
- " to " << theMesh2->GetMeshDS()->ShapeToIndex( v1n ));
+ // MESSAGE("Assoc edge " << theMesh1->GetMeshDS()->ShapeToIndex( e0b )<<
+ // " to " << theMesh2->GetMeshDS()->ShapeToIndex( e1b ));
+ // MESSAGE("Assoc edge " << theMesh1->GetMeshDS()->ShapeToIndex( e0n )<<
+ // " to " << theMesh2->GetMeshDS()->ShapeToIndex( e1n ));
+ // MESSAGE("Assoc vertex " << theMesh1->GetMeshDS()->ShapeToIndex( v0n )<<
+ // " to " << theMesh2->GetMeshDS()->ShapeToIndex( v1n ));
v2e[0].UnBind( V[0] );
v2e[1].UnBind( V[1] );
V[0] = v0n;
// ----------------------------------------------------------------------
TopoDS_Edge edge1 = TopoDS::Edge( theShape1 );
TopoDS_Edge edge2 = TopoDS::Edge( theShape2 );
- if ( IsPropagationPossible( theMesh1, theMesh2 ))
+ if ( isPropagationPossible( theMesh1, theMesh2 ))
{
TopoDS_Edge prpEdge = GetPropagationEdge( theMesh1, edge2, edge1 ).second;
if ( !prpEdge.IsNull() )
InsertAssociation( edge1, prpEdge, theMap ); // insert with a proper orientation
}
InsertAssociation( theShape1, theShape2, theMap );
+ theMap.SetAssocType( TShapeShapeMap::PROPAGATION );
return true; // done
}
}
case TopAbs_FACE: {
// ----------------------------------------------------------------------
- if ( IsPropagationPossible( theMesh1, theMesh2 )) // try by propagation in one mesh
+ if ( isPropagationPossible( theMesh1, theMesh2 )) // try by propagation in one mesh
{
TopoDS_Face face1 = TopoDS::Face(theShape1);
TopoDS_Face face2 = TopoDS::Face(theShape2);
if ( face2.Orientation() >= TopAbs_INTERNAL ) face2.Orientation( TopAbs_FORWARD );
TopoDS_Edge edge1, edge2;
// get outer edge of theShape1
- edge1 = TopoDS::Edge( OuterShape( face1, TopAbs_EDGE ));
- // find out if any edge of face2 is a propagation edge of outer edge1
- map<int,TopoDS_Edge> propag_edges; // use map to find the closest propagation edge
- for ( TopExp_Explorer exp( face2, TopAbs_EDGE ); exp.More(); exp.Next() ) {
- edge2 = TopoDS::Edge( exp.Current() );
- pair<int,TopoDS_Edge> step_edge = GetPropagationEdge( theMesh1, edge2, edge1 );
- if ( !step_edge.second.IsNull() ) { // propagation found
- propag_edges.insert( step_edge );
- if ( step_edge.first == 1 ) break; // most close found
+ TopoDS_Shape wire = OuterShape( face1, TopAbs_WIRE );
+ //edge1 = TopoDS::Edge( OuterShape( face1, TopAbs_EDGE ));
+ // use map to find the closest propagation edge
+ map<int, pair< TopoDS_Edge, TopoDS_Edge > > propag_edges;
+ for ( TopoDS_Iterator edgeIt( wire ); edgeIt.More(); edgeIt.Next() )
+ {
+ edge1 = TopoDS::Edge( edgeIt.Value() );
+ // find out if any edge of face2 is a propagation edge of outer edge1
+ for ( TopExp_Explorer exp( face2, TopAbs_EDGE ); exp.More(); exp.Next() ) {
+ edge2 = TopoDS::Edge( exp.Current() );
+ pair<int,TopoDS_Edge> step_edge = GetPropagationEdge( theMesh1, edge2, edge1 );
+ if ( !step_edge.second.IsNull() ) { // propagation found
+ propag_edges.insert( make_pair( step_edge.first,
+ ( make_pair( edge1, step_edge.second ))));
+ if ( step_edge.first == 1 ) break; // most close found
+ }
}
+ if ( !propag_edges.empty() && propag_edges.begin()->first == 1 ) break;
}
if ( !propag_edges.empty() ) // propagation found
{
- edge2 = propag_edges.begin()->second;
+ edge1 = propag_edges.begin()->second.first;
+ edge2 = propag_edges.begin()->second.second;
TopoDS_Vertex VV1[2], VV2[2];
TopExp::Vertices( edge1, VV1[0], VV1[1], true );
TopExp::Vertices( edge2, VV2[0], VV2[1], true );
// take care of proper association of propagated edges
bool same1 = edge1.IsSame( edges1.front() );
bool same2 = edge2.IsSame( edges2.front() );
+ if ( !same1 && !same2 )
+ {
+ same1 = ( edges1.back().Orientation() == edge1.Orientation() );
+ same2 = ( edges2.back().Orientation() == edge2.Orientation() );
+ }
if ( same1 != same2 )
{
- Reverse(edges2, nbE);
+ reverseEdges(edges2, nbE);
if ( nbE != 2 ) // 2 degen edges of 4 (issue 0021144)
edges2.splice( edges2.end(), edges2, edges2.begin());
}
for ( ; eIt1 != edges1.end(); ++eIt1, ++eIt2 )
{
InsertAssociation( *eIt1, *eIt2, theMap );
- VV1[0] = TopExp::FirstVertex( *eIt1, true );
- VV2[0] = TopExp::FirstVertex( *eIt2, true );
+ VV1[0] = SMESH_MesherHelper::IthVertex( 0, *eIt1, true );
+ VV2[0] = SMESH_MesherHelper::IthVertex( 0, *eIt2, true );
InsertAssociation( VV1[0], VV2[0], theMap );
}
InsertAssociation( theShape1, theShape2, theMap );
+ theMap.SetAssocType( TShapeShapeMap::PROPAGATION );
return true;
}
}
}
case TopAbs_COMPOUND: {
// ----------------------------------------------------------------------
- if ( IsPropagationPossible( theMesh1, theMesh2 )) {
+ if ( isPropagationPossible( theMesh1, theMesh2 )) {
// try to accosiate all using propagation
- if ( AssocGroupsByPropagation( theShape1, theShape2, *theMesh1, theMap ))
+ if ( assocGroupsByPropagation( theShape1, theShape2, *theMesh1, theMap ))
return true;
// find a boundary edge of theShape1
if ( !VV1[1].IsNull() ) {
InsertAssociation( VV1[0], VV2[0], theMap );
InsertAssociation( VV1[1], VV2[1], theMap );
- return FindSubShapeAssociation( theShape1, theMesh1, theShape2, theMesh2, theMap);
+ TShapeShapeMap::EAssocType asType = theMap._assocType;
+ theMap.SetAssocType( TShapeShapeMap::PROPAGATION );
+ if ( FindSubShapeAssociation( theShape1, theMesh1, theShape2, theMesh2, theMap ))
+ return true;
+ theMap._assocType = asType;
}
}
break; // try by vertex closeness
TopoDS_Vertex VV1[2], VV2[2];
if ( vMap1.Extent() != vMap2.Extent() )
- RETURN_BAD_RESULT("Different nb of vertices");
+ {
+ if ( SMESH_MesherHelper:: Count( theShape1, TopAbs_EDGE, /*ignoreSame=*/false ) !=
+ SMESH_MesherHelper:: Count( theShape2, TopAbs_EDGE, /*ignoreSame=*/false ))
+ RETURN_BAD_RESULT("Different nb of vertices");
+ }
- if ( vMap1.Extent() == 1 ) {
+ if ( vMap1.Extent() == 1 || vMap2.Extent() == 1 ) {
InsertAssociation( vMap1(1), vMap2(1), theMap );
if ( theShape1.ShapeType() == TopAbs_EDGE ) {
+ if ( vMap1.Extent() == 2 )
+ InsertAssociation( vMap1(2), vMap2(1), theMap );
+ else if ( vMap2.Extent() == 2 )
+ InsertAssociation( vMap2(2), vMap1(1), theMap );
InsertAssociation( theShape1, theShape2, theMap );
return true;
}
const TopoDS_Shape& v1 = vMap1(i);
if ( vMap2.Contains( v1 ))
{
- // find an egde sharing v1 and sharing at the same time another common vertex
+ // find an edge sharing v1 and sharing at the same time another common vertex
PShapeIteratorPtr edgeIt = SMESH_MesherHelper::GetAncestors( v1, *theMesh1, TopAbs_EDGE);
bool edgeFound = false;
while ( edgeIt->more() && !edgeFound )
{
InsertAssociation( VV1[0], VV1[0], theMap );
InsertAssociation( VV1[1], VV1[1], theMap );
- if (FindSubShapeAssociation( theShape1, theMesh1, theShape2, theMesh2, theMap ))
+ TShapeShapeMap::EAssocType asType = theMap._assocType;
+ theMap.SetAssocType( TShapeShapeMap::COMMON_VERTEX );
+ if ( FindSubShapeAssociation( theShape1, theMesh1, theShape2, theMesh2, theMap ))
return true;
+ theMap._assocType = asType;
}
}
}
// Find transformation to make the shapes be of similar size at same location
Bnd_Box box[2];
- for ( int i = 1; i <= vMap1.Extent(); ++i ) {
+ for ( int i = 1; i <= vMap1.Extent(); ++i )
box[ 0 ].Add( BRep_Tool::Pnt ( TopoDS::Vertex( vMap1( i ))));
+ for ( int i = 1; i <= vMap2.Extent(); ++i )
box[ 1 ].Add( BRep_Tool::Pnt ( TopoDS::Vertex( vMap2( i ))));
- }
gp_Pnt gc[2]; // box center
double x0,y0,z0, x1,y1,z1;
// Find 2 closest vertices
// get 2 linked vertices of shape 1 not belonging to an inner wire of a face
- TopoDS_Shape edge = getOuterEdge( theShape1, *theMesh1 );
- if ( edge.IsNull() || edge.ShapeType() != TopAbs_EDGE )
- RETURN_BAD_RESULT("Edge not found");
-
- TopExp::Vertices( TopoDS::Edge( edge.Oriented(TopAbs_FORWARD)), VV1[0], VV1[1]);
- if ( VV1[0].IsSame( VV1[1] ))
- RETURN_BAD_RESULT("Only closed edges");
-
- // find vertices closest to 2 linked vertices of shape 1
- for ( int i1 = 0; i1 < 2; ++i1 )
+ std::list< TopoDS_Edge > allBndEdges1;
+ if ( !getOuterEdges( theShape1, *theMesh1, allBndEdges1 ))
{
- double dist2 = DBL_MAX;
- gp_Pnt p1 = BRep_Tool::Pnt( VV1[ i1 ]);
- p1.Translate( vec01 );
- p1.Scale( gc[1], scale );
- for ( int i2 = 1; i2 <= vMap2.Extent(); ++i2 )
+ if ( theShape1.ShapeType() != TopAbs_FACE )
+ RETURN_BAD_RESULT("Edge not found");
+ return assocFewEdgesFaces( TopoDS::Face( theShape1 ), theMesh1,
+ TopoDS::Face( theShape2 ), theMesh2, theMap );
+ }
+ std::list< TopoDS_Edge >::iterator edge1 = allBndEdges1.begin();
+ double minDist = std::numeric_limits<double>::max();
+ for ( int nbChecked=0; edge1 != allBndEdges1.end() && nbChecked++ < 10; ++edge1 )
+ {
+ TopoDS_Vertex edge1VV[2];
+ TopExp::Vertices( TopoDS::Edge( edge1->Oriented(TopAbs_FORWARD)), edge1VV[0], edge1VV[1]);
+ if ( edge1VV[0].IsSame( edge1VV[1] ))
+ continue;//RETURN_BAD_RESULT("Only closed edges");
+
+ // find vertices closest to 2 linked vertices of shape 1
+ double dist2[2] = { 1e+100, 1e+100 };
+ TopoDS_Vertex edge2VV[2];
+ for ( int i1 = 0; i1 < 2; ++i1 )
{
- TopoDS_Vertex V2 = TopoDS::Vertex( vMap2( i2 ));
- gp_Pnt p2 = BRep_Tool::Pnt ( V2 );
- double d2 = p1.SquareDistance( p2 );
- if ( d2 < dist2 && !V2.IsSame( VV2[ 0 ])) {
- VV2[ i1 ] = V2; dist2 = d2;
+ gp_Pnt p1 = BRep_Tool::Pnt( edge1VV[ i1 ]);
+ p1.Scale( gc[0], scale );
+ p1.Translate( vec01 );
+ if ( !i1 ) {
+ // select a closest vertex among all ones in vMap2
+ for ( int i2 = 1; i2 <= vMap2.Extent(); ++i2 )
+ {
+ TopoDS_Vertex V2 = TopoDS::Vertex( vMap2( i2 ));
+ gp_Pnt p2 = BRep_Tool::Pnt ( V2 );
+ double d2 = p1.SquareDistance( p2 );
+ if ( d2 < dist2[ 0 ] && d2 < minDist ) {
+ edge2VV[ 0 ] = V2;
+ dist2 [ 0 ] = d2;
+ }
+ }
}
+ else if ( !edge2VV[0].IsNull() ) {
+ // select a closest vertex among ends of edges meeting at edge2VV[0]
+ PShapeIteratorPtr edgeIt = SMESH_MesherHelper::GetAncestors( edge2VV[0],
+ *theMesh2, TopAbs_EDGE);
+ while ( const TopoDS_Shape* edge2 = edgeIt->next() )
+ for ( TopoDS_Iterator itV2( *edge2 ); itV2.More(); itV2.Next() )
+ {
+ if ( itV2.Value().IsSame( edge2VV[ 0 ])) continue;
+ if ( !vMap2.Contains( itV2.Value() )) continue;
+ TopoDS_Vertex V2 = TopoDS::Vertex( itV2.Value() );
+ gp_Pnt p2 = BRep_Tool::Pnt ( V2 );
+ double d2 = p1.SquareDistance( p2 );
+ if ( d2 < dist2[1] && d2 < minDist ) {
+ edge2VV[ 1 ] = V2;
+ dist2 [ 1 ] = d2;
+ }
+ }
+ }
+ }
+ if ( dist2[0] + dist2[1] < minDist ) {
+ VV1[0] = edge1VV[0];
+ VV1[1] = edge1VV[1];
+ VV2[0] = edge2VV[0];
+ VV2[1] = edge2VV[1];
+ minDist = dist2[0] + dist2[1];
+ if ( minDist < 1e-10 )
+ break;
}
}
+ theMap.SetAssocType( TShapeShapeMap::CLOSE_VERTEX );
InsertAssociation( VV1[ 0 ], VV2[ 0 ], theMap );
InsertAssociation( VV1[ 1 ], VV2[ 1 ], theMap );
- MESSAGE("Initial assoc VERT " << theMesh1->GetMeshDS()->ShapeToIndex( VV1[ 0 ] )<<
- " to " << theMesh2->GetMeshDS()->ShapeToIndex( VV2[ 0 ] )<<
- "\nand VERT " << theMesh1->GetMeshDS()->ShapeToIndex( VV1[ 1 ] )<<
- " to " << theMesh2->GetMeshDS()->ShapeToIndex( VV2[ 1 ] ));
+ // MESSAGE("Initial assoc VERT " << theMesh1->GetMeshDS()->ShapeToIndex( VV1[ 0 ] )<<
+ // " to " << theMesh2->GetMeshDS()->ShapeToIndex( VV2[ 0 ] )<<
+ // "\nand VERT " << theMesh1->GetMeshDS()->ShapeToIndex( VV1[ 1 ] )<<
+ // " to " << theMesh2->GetMeshDS()->ShapeToIndex( VV2[ 1 ] ));
if ( theShape1.ShapeType() == TopAbs_EDGE ) {
InsertAssociation( theShape1, theShape2, theMap );
return true;
}
//================================================================================
-/*!
- * \brief Find association of edges of faces
- * \param face1 - face 1
- * \param VV1 - vertices of face 1
- * \param face2 - face 2
- * \param VV2 - vertices of face 2 associated with ones of face 1
- * \param edges1 - out list of edges of face 1
- * \param edges2 - out list of edges of face 2
- * \retval int - nb of edges in an outer wire in a success case, else zero
+/*
+ * Find association of edges of faces
+ * \param face1 - face 1
+ * \param VV1 - vertices of face 1
+ * \param face2 - face 2
+ * \param VV2 - vertices of face 2 associated with ones of face 1
+ * \param edges1 - out list of edges of face 1
+ * \param edges2 - out list of edges of face 2
+ * \param isClosenessAssoc - is association starting by VERTEX closeness
+ * \retval int - nb of edges in an outer wire in a success case, else zero
*/
//================================================================================
const TopoDS_Face& face2,
TopoDS_Vertex VV2[2],
list< TopoDS_Edge > & edges1,
- list< TopoDS_Edge > & edges2)
+ list< TopoDS_Edge > & edges2,
+ const bool isClosenessAssoc)
{
bool OK = false;
list< int > nbEInW1, nbEInW2;
+ list< TopoDS_Edge >::iterator edgeIt;
int i_ok_wire_algo = -1;
for ( int outer_wire_algo = 0; outer_wire_algo < 2 && !OK; ++outer_wire_algo )
{
edges1.clear();
edges2.clear();
- if ( SMESH_Block::GetOrderedEdges( face1, VV1[0], edges1, nbEInW1, outer_wire_algo) !=
- SMESH_Block::GetOrderedEdges( face2, VV2[0], edges2, nbEInW2, outer_wire_algo) )
+ if ( SMESH_Block::GetOrderedEdges( face1, edges1, nbEInW1, VV1[0], outer_wire_algo) !=
+ SMESH_Block::GetOrderedEdges( face2, edges2, nbEInW2, VV2[0], outer_wire_algo) )
CONT_BAD_RESULT("Different number of wires in faces ");
- if ( nbEInW1 != nbEInW2 )
- CONT_BAD_RESULT("Different number of edges in faces: " <<
+ if ( nbEInW1 != nbEInW2 && outer_wire_algo == 0 &&
+ ( std::accumulate( nbEInW1.begin(), nbEInW1.end(), 0) !=
+ std::accumulate( nbEInW2.begin(), nbEInW2.end(), 0)))
+ RETURN_BAD_RESULT("Different number of edges in faces");
+
+ if ( nbEInW1.front() != nbEInW2.front() )
+ CONT_BAD_RESULT("Different number of edges in the outer wire: " <<
nbEInW1.front() << " != " << nbEInW2.front());
i_ok_wire_algo = outer_wire_algo;
// Define if we need to reverse one of wires to make edges in lists match each other
bool reverse = false;
+ const bool severalWires = ( nbEInW1.size() > 1 );
- list< TopoDS_Edge >::iterator edgeIt;
- if ( !VV1[1].IsSame( TopExp::LastVertex( edges1.front(), true ))) {
+ if ( !VV1[1].IsSame( TopExp::LastVertex( edges1.front(), true )))
+ {
reverse = true;
- edgeIt = --edges1.end();
// check if the second vertex belongs to the first or last edge in the wire
+ edgeIt = --edges1.end(); // pointer to the last edge in the outer wire
+ if ( severalWires ) {
+ edgeIt = edges1.begin();
+ std::advance( edgeIt, nbEInW1.front()-1 );
+ }
+ if ( TopExp::FirstVertex( *edgeIt ).IsSame( TopExp::LastVertex( *edgeIt )) &&
+ SMESH_Algo::isDegenerated( *edgeIt )) {
+ --edgeIt; // skip a degenerated edge (test 3D_mesh_Projection_00/A3)
+ }
if ( !VV1[1].IsSame( TopExp::FirstVertex( *edgeIt, true ))) {
- bool KO = true; // belongs to none
- if ( nbEInW1.size() > 1 ) { // several wires
- edgeIt = edges1.begin();
- std::advance( edgeIt, nbEInW1.front()-1 );
- KO = !VV1[1].IsSame( TopExp::FirstVertex( *edgeIt, true ));
- }
- if ( KO )
- CONT_BAD_RESULT("GetOrderedEdges() failed");
+ CONT_BAD_RESULT("GetOrderedEdges() failed");
}
}
- edgeIt = --edges2.end();
- if ( !VV2[1].IsSame( TopExp::LastVertex( edges2.front(), true ))) {
+ if ( !VV2[1].IsSame( TopExp::LastVertex( edges2.front(), true )))
+ {
reverse = !reverse;
// check if the second vertex belongs to the first or last edge in the wire
+ edgeIt = --edges2.end(); // pointer to the last edge in the outer wire
+ if ( severalWires ) {
+ edgeIt = edges2.begin();
+ std::advance( edgeIt, nbEInW2.front()-1 );
+ }
+ if ( TopExp::FirstVertex( *edgeIt ).IsSame( TopExp::LastVertex( *edgeIt )) &&
+ SMESH_Algo::isDegenerated( *edgeIt )) {
+ --edgeIt; // skip a degenerated edge
+ }
if ( !VV2[1].IsSame( TopExp::FirstVertex( *edgeIt, true ))) {
- bool KO = true; // belongs to none
- if ( nbEInW2.size() > 1 ) { // several wires
- edgeIt = edges2.begin();
- std::advance( edgeIt, nbEInW2.front()-1 );
- KO = !VV2[1].IsSame( TopExp::FirstVertex( *edgeIt, true ));
- }
- if ( KO )
- CONT_BAD_RESULT("GetOrderedEdges() failed");
+ CONT_BAD_RESULT("GetOrderedEdges() failed");
}
}
if ( reverse )
{
- Reverse( edges2 , nbEInW2.front());
+ reverseEdges( edges2 , nbEInW2.front());
+
+ if ( SMESH_Algo::isDegenerated( edges2.front() ))
+ {
+ // move a degenerated edge to the back of the outer wire
+ edgeIt = edges2.end();
+ if ( severalWires ) {
+ edgeIt = edges2.begin();
+ std::advance( edgeIt, nbEInW2.front() );
+ }
+ edges2.splice( edgeIt, edges2, edges2.begin() );
+ }
if (( VV1[1].IsSame( TopExp::LastVertex( edges1.front(), true ))) !=
( VV2[1].IsSame( TopExp::LastVertex( edges2.front(), true ))))
CONT_BAD_RESULT("GetOrderedEdges() failed");
OK = true;
} // loop algos getting an outer wire
+
+ if ( OK && nbEInW1.front() > 4 ) // care of a case where faces are closed (23032)
+ {
+ // check if the first edges are seam ones
+ list< TopoDS_Edge >::iterator revSeam1, revSeam2;
+ revSeam1 = std::find( ++edges1.begin(), edges1.end(), edges1.front().Reversed());
+ revSeam2 = edges2.end();
+ if ( revSeam1 != edges1.end() )
+ revSeam2 = std::find( ++edges2.begin(), edges2.end(), edges2.front().Reversed());
+ if ( revSeam2 != edges2.end() ) // two seams detected
+ {
+ bool reverse =
+ std::distance( edges1.begin(), revSeam1 ) != std::distance( edges2.begin(), revSeam2 );
+ if ( !reverse && isClosenessAssoc )
+ {
+ // compare orientations of a non-seam edges using 3D closeness;
+ // look for a non-seam edges
+ list< TopoDS_Edge >::iterator edge1 = ++edges1.begin();
+ list< TopoDS_Edge >::iterator edge2 = ++edges2.begin();
+ for ( ; edge1 != edges1.end(); ++edge1, ++edge2 )
+ {
+ if (( edge1 == revSeam1 ) ||
+ ( SMESH_Algo::isDegenerated( *edge1 )) ||
+ ( std::find( ++edges1.begin(), edges1.end(), edge1->Reversed()) != edges1.end() ))
+ continue;
+ gp_Pnt p1 = BRep_Tool::Pnt( VV1[0] );
+ gp_Pnt p2 = BRep_Tool::Pnt( VV2[0] );
+ gp_Vec vec2to1( p2, p1 );
+
+ gp_Pnt pp1[2], pp2[2];
+ const double r = 0.2345;
+ double f,l;
+ Handle(Geom_Curve) C = BRep_Tool::Curve( *edge1, f,l );
+ pp1[0] = C->Value( f * r + l * ( 1. - r ));
+ pp1[1] = C->Value( l * r + f * ( 1. - r ));
+ if ( edge1->Orientation() == TopAbs_REVERSED )
+ std::swap( pp1[0], pp1[1] );
+ C = BRep_Tool::Curve( *edge2, f,l );
+ if ( C.IsNull() ) return 0;
+ pp2[0] = C->Value( f * r + l * ( 1. - r )).Translated( vec2to1 );
+ pp2[1] = C->Value( l * r + f * ( 1. - r )).Translated( vec2to1 );
+ if ( edge2->Orientation() == TopAbs_REVERSED )
+ std::swap( pp2[0], pp2[1] );
+
+ double dist00 = pp1[0].SquareDistance( pp2[0] );
+ double dist01 = pp1[0].SquareDistance( pp2[1] );
+ reverse = ( dist00 > dist01 );
+ break;
+ }
+ }
+ if ( reverse ) // make a seam counterpart be the first
+ {
+ list< TopoDS_Edge >::iterator outWireEnd = edges2.begin();
+ std::advance( outWireEnd, nbEInW2.front() );
+ edges2.splice( outWireEnd, edges2, edges2.begin(), ++revSeam2 );
+ reverseEdges( edges2 , nbEInW2.front());
+ }
+ }
+ }
// Try to orient all (if !OK) or only internal wires (issue 0020996) by UV similarity
+
if (( !OK || nbEInW1.size() > 1 ) && i_ok_wire_algo > -1 )
{
// Check that Vec(VV1[0],VV1[1]) in 2D on face1 is the same
// as Vec(VV2[0],VV2[1]) on face2
double vTol = BRep_Tool::Tolerance( VV1[0] );
- BRepAdaptor_Surface surface1( face1, false );
+ BRepAdaptor_Surface surface1( face1, true );
+ BRepAdaptor_Surface surface2( face2, true );
+ // TODO: use TrsfFinder2D to superpose the faces
+ gp_Pnt2d v0f1UV( surface1.FirstUParameter(), surface1.FirstVParameter() );
+ gp_Pnt2d v0f2UV( surface2.FirstUParameter(), surface2.FirstVParameter() );
+ gp_Pnt2d v1f1UV( surface1.LastUParameter(), surface1.LastVParameter() );
+ gp_Pnt2d v1f2UV( surface2.LastUParameter(), surface2.LastVParameter() );
double vTolUV =
surface1.UResolution( vTol ) + surface1.VResolution( vTol ); // let's be tolerant
- gp_Pnt2d v0f1UV = BRep_Tool::Parameters( VV1[0], face1 );
- gp_Pnt2d v0f2UV = BRep_Tool::Parameters( VV2[0], face2 );
- gp_Pnt2d v1f1UV = BRep_Tool::Parameters( VV1[1], face1 );
- gp_Pnt2d v1f2UV = BRep_Tool::Parameters( VV2[1], face2 );
+ // VV1[0] = TopExp::FirstVertex( edges1.front(), true ); // ori is important if face is closed
+ // VV1[1] = TopExp::LastVertex ( edges1.front(), true );
+ // VV2[0] = TopExp::FirstVertex( edges2.front(), true );
+ // VV2[1] = TopExp::LastVertex ( edges2.front(), true );
+ // gp_Pnt2d v0f1UV = BRep_Tool::Parameters( VV1[0], face1 );
+ // gp_Pnt2d v0f2UV = BRep_Tool::Parameters( VV2[0], face2 );
+ // gp_Pnt2d v1f1UV = BRep_Tool::Parameters( VV1[1], face1 );
+ // gp_Pnt2d v1f2UV = BRep_Tool::Parameters( VV2[1], face2 );
gp_Vec2d v01f1Vec( v0f1UV, v1f1UV );
gp_Vec2d v01f2Vec( v0f2UV, v1f2UV );
if ( Abs( v01f1Vec.X()-v01f2Vec.X()) < vTolUV &&
{
edges1.clear();
edges2.clear();
- SMESH_Block::GetOrderedEdges( face1, VV1[0], edges1, nbEInW1, i_ok_wire_algo);
- SMESH_Block::GetOrderedEdges( face2, VV2[0], edges2, nbEInW2, i_ok_wire_algo);
+ SMESH_Block::GetOrderedEdges( face1, edges1, nbEInW1, VV1[0], i_ok_wire_algo);
+ SMESH_Block::GetOrderedEdges( face2, edges2, nbEInW2, VV2[0], i_ok_wire_algo);
}
gp_XY dUV = v0f2UV.XY() - v0f1UV.XY(); // UV shift between 2 faces
+ //
// skip edges of the outer wire (if the outer wire is OK)
- list< int >::iterator nbEInW = nbEInW1.begin();
- list< TopoDS_Edge >::iterator edge1Beg = edges1.begin(), edge2Beg = edges2.begin();
- if ( OK )
- {
- for ( int i = 0; i < *nbEInW; ++i )
- ++edge1Beg, ++edge2Beg;
- ++nbEInW;
- }
- for ( ; nbEInW != nbEInW1.end(); ++nbEInW ) // loop on wires
+ list< int >::iterator nbE2, nbE1 = nbEInW1.begin();
+ list< TopoDS_Edge >::iterator edge2Beg, edge1Beg = edges1.begin();
+ if ( OK ) std::advance( edge1Beg, *nbE1++ );
+ list< TopoDS_Edge >::iterator edge2End, edge1End;
+ //
+ // find corresponding wires of face2
+ for ( int iW1 = OK; nbE1 != nbEInW1.end(); ++nbE1, ++iW1 ) // loop on wires of face1
{
- // reach an end of edges of a current wire
- list< TopoDS_Edge >::iterator edge1End = edge1Beg, edge2End = edge2Beg;
- for ( int i = 0; i < *nbEInW; ++i )
- ++edge1End, ++edge2End;
- // rotate edges2 untill coincident with edges1 in 2D
- v0f1UV = BRep_Tool::Parameters( TopExp::FirstVertex(*edge1Beg,true), face1 );
- v1f1UV = BRep_Tool::Parameters( TopExp::LastVertex (*edge1Beg,true), face1 );
+ // reach an end of edges of a current wire1
+ edge1End = edge1Beg;
+ std::advance( edge1End, *nbE1 );
+ // UV on face1 to find on face2
+ TopoDS_Vertex v01 = SMESH_MesherHelper::IthVertex(0,*edge1Beg);
+ TopoDS_Vertex v11 = SMESH_MesherHelper::IthVertex(1,*edge1Beg);
+ v0f1UV = BRep_Tool::Parameters( v01, face1 );
+ v1f1UV = BRep_Tool::Parameters( v11, face1 );
v0f1UV.ChangeCoord() += dUV;
v1f1UV.ChangeCoord() += dUV;
- int i = *nbEInW;
- while ( --i > 0 && !sameVertexUV( *edge2Beg, face2, 0, v0f1UV, vTolUV ))
- edges2.splice( edge2End, edges2, edge2Beg++ ); // move edge2Beg to place before edge2End
- if ( sameVertexUV( *edge2Beg, face2, 0, v0f1UV, vTolUV ))
+ //
+ // look through wires of face2
+ edge2Beg = edges2.begin();
+ nbE2 = nbEInW2.begin();
+ if ( OK ) std::advance( edge2Beg, *nbE2++ );
+ for ( int iW2 = OK; nbE2 != nbEInW2.end(); ++nbE2, ++iW2 ) // loop on wires of face2
{
- if ( nbEInW == nbEInW1.begin() )
- OK = true; // OK is for the first wire
- // reverse edges2 if needed
- if ( !sameVertexUV( *edge2Beg, face2, 1, v1f1UV, vTolUV ))
+ // reach an end of edges of a current wire2
+ edge2End = edge2Beg;
+ std::advance( edge2End, *nbE2 );
+ if ( *nbE1 == *nbE2 && iW2 >= iW1 )
{
- Reverse( edges2 , *nbEInW, distance( edges2.begin(),edge2Beg ));
- // set correct edge2End
- edge2End = edges2.begin();
- std::advance( edge2End, std::accumulate( nbEInW1.begin(), nbEInW, *nbEInW));
+ // rotate edge2 until coincides with edge1 in 2D
+ int i = *nbE2;
+ bool sameUV = false;
+ while ( !( sameUV = sameVertexUV( *edge2Beg, face2, 0, v0f1UV, vTolUV )) && --i > 0 )
+ // move edge2Beg to place before edge2End
+ edges2.splice( edge2End, edges2, edge2Beg++ );
+
+ if ( sameUV )
+ {
+ if ( iW1 == 0 ) OK = true; // OK is for the first wire
+
+ // reverse edges2 if needed
+ if ( SMESH_MesherHelper::IsClosedEdge( *edge1Beg ))
+ {
+ // Commented (so far?) as it's not checked if orientation must be same or reversed
+ // double f,l;
+ // Handle(Geom2d_Curve) c1 = BRep_Tool::CurveOnSurface( *edge1Beg, face1,f,l );
+ // if ( edge1Beg->Orientation() == TopAbs_REVERSED )
+ // std::swap( f,l );
+ // gp_Pnt2d uv1 = dUV + c1->Value( f * 0.8 + l * 0.2 ).XY();
+
+ // Handle(Geom2d_Curve) c2 = BRep_Tool::CurveOnSurface( *edge2Beg, face2,f,l );
+ // if ( edge2Beg->Orientation() == TopAbs_REVERSED )
+ // std::swap( f,l );
+ // gp_Pnt2d uv2 = c2->Value( f * 0.8 + l * 0.2 );
+ // gp_Pnt2d uv3 = c2->Value( l * 0.8 + f * 0.2 );
+
+ // if ( uv1.SquareDistance( uv2 ) > uv1.SquareDistance( uv3 ))
+ // edge2Beg->Reverse();
+ }
+ else
+ {
+ if ( !sameVertexUV( *edge2Beg, face2, 1, v1f1UV, vTolUV ))
+ reverseEdges( edges2 , *nbE2, std::distance( edges2.begin(),edge2Beg ));
+ }
+
+ // put wire2 at a right place within edges2
+ if ( iW1 != iW2 ) {
+ list< TopoDS_Edge >::iterator place2 = edges2.begin();
+ std::advance( place2, std::distance( edges1.begin(), edge1Beg ));
+ edges2.splice( place2, edges2, edge2Beg, edge2End );
+ // move nbE2 as well
+ list< int >::iterator placeNbE2 = nbEInW2.begin();
+ std::advance( placeNbE2, iW1 );
+ nbEInW2.splice( placeNbE2, nbEInW2, nbE2 );
+ }
+ break;
+ }
}
+ // prepare for the next wire loop
+ edge2Beg = edge2End;
}
- // prepare to the next wire loop
- edge1Beg = edge1End, edge2Beg = edge2End;
+ edge1Beg = edge1End;
+ }
+ }
+ }
+
+ const int nbEdges = nbEInW1.front();
+ if ( OK && nbEdges == 2 )
+ {
+ // if wires include 2 edges, it's impossible to associate them using
+ // topological information only. Try to use length of edges for association.
+ double l1[2], l2[2];
+ edgeIt = edges1.begin();
+ l1[0] = SMESH_Algo::EdgeLength( *edgeIt++ );
+ l1[1] = SMESH_Algo::EdgeLength( *edgeIt++ );
+ if ( Abs( l1[0] - l1[1] ) > 0.1 * Max( l1[0], l1[1] ) )
+ {
+ edgeIt = edges2.begin();
+ l2[0] = SMESH_Algo::EdgeLength( *edgeIt++ );
+ l2[1] = SMESH_Algo::EdgeLength( *edgeIt++ );
+ if (( l1[0] < l1[1] ) != ( l2[0] < l2[1] ))
+ {
+ reverseEdges( edges2, nbEdges );
}
}
}
}
//=======================================================================
-/*!
- * \brief Inserts association theShape1 <-> theShape2 to TShapeShapeMap
- * \param theShape1 - target shape
- * \param theShape2 - source shape
- * \param theAssociationMap - association map
- * \retval bool - true if there was no association for these shapes before
+/*
+ * Inserts association theShape1 <-> theShape2 to TShapeShapeMap
+ * \param theShape1 - target shape
+ * \param theShape2 - source shape
+ * \param theAssociationMap - association map
+ * \retval bool - true if there was no association for these shapes before
*/
//=======================================================================
}
//=======================================================================
-/*!
- * \brief Finds an edge by its vertices in a main shape of the mesh
- * \param aMesh - the mesh
- * \param V1 - vertex 1
- * \param V2 - vertex 2
- * \retval TopoDS_Edge - found edge
+/*
+ * Finds an edge by its vertices in a main shape of the mesh
+ * \param aMesh - the mesh
+ * \param V1 - vertex 1
+ * \param V2 - vertex 2
+ * \retval TopoDS_Edge - found edge
*/
//=======================================================================
}
//================================================================================
-/*!
- * \brief Return another face sharing an edge
- * \param edgeToFaces - data map of descendants to ancestors
- * \param edge - edge
- * \param face - face
- * \retval TopoDS_Face - found face
+/*
+ * Return another face sharing an edge
+ * \param edgeToFaces - data map of descendants to ancestors
+ * \param edge - edge
+ * \param face - face
+ * \retval TopoDS_Face - found face
*/
//================================================================================
}
//================================================================================
-/*!
- * \brief Return other vertex of an edge
+/*
+ * Return other vertex of an edge
*/
//================================================================================
}
//================================================================================
-/*!
- * \brief Return a propagation edge
- * \param aMesh - mesh
- * \param theEdge - edge to find by propagation
- * \param fromEdge - start edge for propagation
- * \retval pair<int,TopoDS_Edge> - propagation step and found edge
+/*
+ * Return a propagation edge
+ * \param aMesh - mesh
+ * \param anEdge - edge to find by propagation
+ * \param fromEdge - start edge for propagation
+ * \param chain - return, if !NULL, a propagation chain passed till
+ * anEdge; if anEdge.IsNull() then a full propagation chain is returned;
+ * fromEdge is the 1st in the chain
+ * \retval pair<int,TopoDS_Edge> - propagation step and found edge
*/
//================================================================================
pair<int,TopoDS_Edge>
-StdMeshers_ProjectionUtils::GetPropagationEdge( SMESH_Mesh* aMesh,
- const TopoDS_Edge& theEdge,
- const TopoDS_Edge& fromEdge)
+StdMeshers_ProjectionUtils::GetPropagationEdge( SMESH_Mesh* aMesh,
+ const TopoDS_Edge& anEdge,
+ const TopoDS_Edge& fromEdge,
+ TopTools_IndexedMapOfShape* chain)
{
- TopTools_IndexedMapOfShape aChain;
+ TopTools_IndexedMapOfShape locChain;
+ TopTools_IndexedMapOfShape& aChain = chain ? *chain : locChain;
int step = 0;
+ //TopTools_IndexedMapOfShape checkedWires;
+ BRepTools_WireExplorer aWE;
+ TopoDS_Shape fourEdges[4];
+
// List of edges, added to chain on the previous cycle pass
TopTools_ListOfShape listPrevEdges;
- listPrevEdges.Append(fromEdge);
+ listPrevEdges.Append( fromEdge );
+ aChain.Add( fromEdge );
// Collect all edges pass by pass
- while (listPrevEdges.Extent() > 0) {
+ while (listPrevEdges.Extent() > 0)
+ {
step++;
// List of edges, added to chain on this cycle pass
TopTools_ListOfShape listCurEdges;
// Find the next portion of edges
TopTools_ListIteratorOfListOfShape itE (listPrevEdges);
- for (; itE.More(); itE.Next()) {
- TopoDS_Shape anE = itE.Value();
+ for (; itE.More(); itE.Next())
+ {
+ const TopoDS_Shape& anE = itE.Value();
// Iterate on faces, having edge <anE>
TopTools_ListIteratorOfListOfShape itA (aMesh->GetAncestors(anE));
- for (; itA.More(); itA.Next()) {
- TopoDS_Shape aW = itA.Value();
+ for (; itA.More(); itA.Next())
+ {
+ const TopoDS_Shape& aW = itA.Value();
// There are objects of different type among the ancestors of edge
- if (aW.ShapeType() == TopAbs_WIRE) {
- TopoDS_Shape anOppE;
-
- BRepTools_WireExplorer aWE (TopoDS::Wire(aW));
- Standard_Integer nb = 1, found = 0;
- TopTools_Array1OfShape anEdges (1,4);
- for (; aWE.More(); aWE.Next(), nb++) {
- if (nb > 4) {
- found = 0;
+ if ( aW.ShapeType() == TopAbs_WIRE /*&& checkedWires.Add( aW )*/)
+ {
+ Standard_Integer nb = 0, found = -1;
+ for ( aWE.Init( TopoDS::Wire( aW )); aWE.More(); aWE.Next() ) {
+ if (nb+1 > 4) {
+ found = -1;
break;
}
- anEdges(nb) = aWE.Current();
- if (anEdges(nb).IsSame(anE)) found = nb;
+ fourEdges[ nb ] = aWE.Current();
+ if ( aWE.Current().IsSame( anE )) found = nb;
+ nb++;
}
-
- if (nb == 5 && found > 0) {
+ if (nb == 4 && found >= 0) {
// Quadrangle face found, get an opposite edge
- Standard_Integer opp = found + 2;
- if (opp > 4) opp -= 4;
- anOppE = anEdges(opp);
+ TopoDS_Shape& anOppE = fourEdges[( found + 2 ) % 4 ];
// add anOppE to aChain if ...
- if (!aChain.Contains(anOppE)) { // ... anOppE is not in aChain
+ int prevChainSize = aChain.Extent();
+ if ( aChain.Add(anOppE) > prevChainSize ) { // ... anOppE is not in aChain
// Add found edge to the chain oriented so that to
- // have it co-directed with a forward MainEdge
+ // have it co-directed with a fromEdge
TopAbs_Orientation ori = anE.Orientation();
- if ( anEdges(opp).Orientation() == anEdges(found).Orientation() )
+ if ( anOppE.Orientation() == fourEdges[found].Orientation() )
ori = TopAbs::Reverse( ori );
anOppE.Orientation( ori );
- if ( anOppE.IsSame( theEdge ))
+ if ( anOppE.IsSame( anEdge ))
return make_pair( step, TopoDS::Edge( anOppE ));
- aChain.Add(anOppE);
listCurEdges.Append(anOppE);
}
- } // if (nb == 5 && found > 0)
+ } // if (nb == 4 && found >= 0)
} // if (aF.ShapeType() == TopAbs_WIRE)
- } // for (; itF.More(); itF.Next())
- } // for (; itE.More(); itE.Next())
+ } // loop on ancestors of anE
+ } // loop on listPrevEdges
listPrevEdges = listCurEdges;
} // while (listPrevEdges.Extent() > 0)
}
//================================================================================
- /*!
- * \brief Find corresponding nodes on two faces
- * \param face1 - the first face
- * \param mesh1 - mesh containing elements on the first face
- * \param face2 - the second face
- * \param mesh2 - mesh containing elements on the second face
- * \param assocMap - map associating sub-shapes of the faces
- * \param node1To2Map - map containing found matching nodes
- * \retval bool - is a success
- */
+/*
+ * Find corresponding nodes on two faces
+ * \param face1 - the first face
+ * \param mesh1 - mesh containing elements on the first face
+ * \param face2 - the second face
+ * \param mesh2 - mesh containing elements on the second face
+ * \param assocMap - map associating sub-shapes of the faces
+ * \param node1To2Map - map containing found matching nodes
+ * \retval bool - is a success
+ */
//================================================================================
bool StdMeshers_ProjectionUtils::
{
SMESHDS_Mesh* meshDS1 = mesh1->GetMeshDS();
SMESHDS_Mesh* meshDS2 = mesh2->GetMeshDS();
-
+
SMESH_MesherHelper helper1( *mesh1 );
SMESH_MesherHelper helper2( *mesh2 );
helper1.SetSubShape( face1 );
helper2.SetSubShape( face2 );
- if ( helper1.HasSeam() != helper2.HasSeam() )
+ if ( helper1.HasRealSeam() != helper2.HasRealSeam() )
RETURN_BAD_RESULT("Different faces' geometry");
// Data to call SMESH_MeshEditor::FindMatchingNodes():
eE.Next();
// edge 1
if ( !assocMap.IsBound( e2, /*is2nd=*/true ))
- RETURN_BAD_RESULT("Association not found for edge " << meshDS2->ShapeToIndex( e2 ));
+ continue;
+ //RETURN_BAD_RESULT("Association not found for edge " << meshDS2->ShapeToIndex( e2 ));
TopoDS_Edge e1 = TopoDS::Edge( assocMap( e2, /*is2nd=*/true ));
if ( !helper1.IsSubShape( e1, face1 ))
RETURN_BAD_RESULT("Wrong association, edge " << meshDS1->ShapeToIndex( e1 ) <<
// get 2 matching vertices
TopoDS_Vertex V2 = TopExp::FirstVertex( TopoDS::Edge( edge2 ));
if ( !assocMap.IsBound( V2, /*is2nd=*/true ))
- RETURN_BAD_RESULT("Association not found for vertex " << meshDS2->ShapeToIndex( V2 ));
+ {
+ V2 = TopExp::LastVertex( TopoDS::Edge( edge2 ));
+ if ( !assocMap.IsBound( V2, /*is2nd=*/true ))
+ RETURN_BAD_RESULT("Association not found for vertex " << meshDS2->ShapeToIndex( V2 ));
+ }
TopoDS_Vertex V1 = TopoDS::Vertex( assocMap( V2, /*is2nd=*/true ));
// nodes on vertices
// 2. face sets
- set<const SMDS_MeshElement*> Elems1, Elems2;
- for ( int is2 = 0; is2 < 2; ++is2 )
+ int assocRes;
+ for ( int iAttempt = 0; iAttempt < 2; ++iAttempt )
{
- set<const SMDS_MeshElement*> & elems = is2 ? Elems2 : Elems1;
- SMESHDS_SubMesh* sm = is2 ? SM2 : SM1;
- SMESH_MesherHelper* helper = is2 ? &helper2 : &helper1;
- const TopoDS_Face & face = is2 ? face2 : face1;
- SMDS_ElemIteratorPtr eIt = sm->GetElements();
-
- if ( !helper->IsRealSeam( is2 ? edge2 : edge1 ))
- {
- while ( eIt->more() ) elems.insert( eIt->next() );
- }
- else
+ set<const SMDS_MeshElement*> Elems1, Elems2;
+ for ( int is2 = 0; is2 < 2; ++is2 )
{
- // the only suitable edge is seam, i.e. it is a sphere.
- // FindMatchingNodes() will not know which way to go from any edge.
- // So we ignore all faces having nodes on edges or vertices except
- // one of faces sharing current start nodes
-
- // find a face to keep
- const SMDS_MeshElement* faceToKeep = 0;
- const SMDS_MeshNode* vNode = is2 ? vNode2 : vNode1;
- const SMDS_MeshNode* eNode = is2 ? eNode2[0] : eNode1[0];
- TIDSortedElemSet inSet, notInSet;
-
- const SMDS_MeshElement* f1 =
- SMESH_MeshEditor::FindFaceInSet( vNode, eNode, inSet, notInSet );
- if ( !f1 ) RETURN_BAD_RESULT("The first face on seam not found");
- notInSet.insert( f1 );
-
- const SMDS_MeshElement* f2 =
- SMESH_MeshEditor::FindFaceInSet( vNode, eNode, inSet, notInSet );
- if ( !f2 ) RETURN_BAD_RESULT("The second face on seam not found");
-
- // select a face with less UV of vNode
- const SMDS_MeshNode* notSeamNode[2] = {0, 0};
- for ( int iF = 0; iF < 2; ++iF ) {
- const SMDS_MeshElement* f = ( iF ? f2 : f1 );
- for ( int i = 0; !notSeamNode[ iF ] && i < f->NbNodes(); ++i ) {
- const SMDS_MeshNode* node = f->GetNode( i );
- if ( !helper->IsSeamShape( node->getshapeId() ))
- notSeamNode[ iF ] = node;
- }
+ set<const SMDS_MeshElement*> & elems = is2 ? Elems2 : Elems1;
+ SMESHDS_SubMesh* sm = is2 ? SM2 : SM1;
+ SMESH_MesherHelper* helper = is2 ? &helper2 : &helper1;
+ const TopoDS_Face & face = is2 ? face2 : face1;
+ SMDS_ElemIteratorPtr eIt = sm->GetElements();
+
+ if ( !helper->IsRealSeam( is2 ? edge2 : edge1 ))
+ {
+ while ( eIt->more() ) elems.insert( elems.end(), eIt->next() );
}
- gp_Pnt2d uv1 = helper->GetNodeUV( face, vNode, notSeamNode[0] );
- gp_Pnt2d uv2 = helper->GetNodeUV( face, vNode, notSeamNode[1] );
- if ( uv1.X() + uv1.Y() > uv2.X() + uv2.Y() )
- faceToKeep = f2;
else
- faceToKeep = f1;
-
- // fill elem set
- elems.insert( faceToKeep );
- while ( eIt->more() ) {
- const SMDS_MeshElement* f = eIt->next();
- int nbNodes = f->NbNodes();
- if ( f->IsQuadratic() )
- nbNodes /= 2;
- bool onBnd = false;
- for ( int i = 0; !onBnd && i < nbNodes; ++i ) {
- const SMDS_MeshNode* node = f->GetNode( i );
- onBnd = ( node->GetPosition()->GetTypeOfPosition() != SMDS_TOP_FACE);
+ {
+ // the only suitable edge is seam, i.e. it is a sphere.
+ // FindMatchingNodes() will not know which way to go from any edge.
+ // So we ignore all faces having nodes on edges or vertices except
+ // one of faces sharing current start nodes
+
+ // find a face to keep
+ const SMDS_MeshElement* faceToKeep = 0;
+ const SMDS_MeshNode* vNode = is2 ? vNode2 : vNode1;
+ const SMDS_MeshNode* eNode = is2 ? eNode2[0] : eNode1[0];
+ TIDSortedElemSet inSet, notInSet;
+
+ const SMDS_MeshElement* f1 =
+ SMESH_MeshAlgos::FindFaceInSet( vNode, eNode, inSet, notInSet );
+ if ( !f1 ) RETURN_BAD_RESULT("The first face on seam not found");
+ notInSet.insert( f1 );
+
+ const SMDS_MeshElement* f2 =
+ SMESH_MeshAlgos::FindFaceInSet( vNode, eNode, inSet, notInSet );
+ if ( !f2 ) RETURN_BAD_RESULT("The second face on seam not found");
+
+ // select a face with less UV of vNode
+ const SMDS_MeshNode* notSeamNode[2] = {0, 0};
+ for ( int iF = 0; iF < 2; ++iF ) {
+ const SMDS_MeshElement* f = ( iF ? f2 : f1 );
+ for ( int i = 0; !notSeamNode[ iF ] && i < f->NbNodes(); ++i ) {
+ const SMDS_MeshNode* node = f->GetNode( i );
+ if ( !helper->IsSeamShape( node->getshapeId() ))
+ notSeamNode[ iF ] = node;
+ }
}
- if ( !onBnd )
- elems.insert( f );
- }
- // add also faces adjacent to faceToKeep
- int nbNodes = faceToKeep->NbNodes();
- if ( faceToKeep->IsQuadratic() ) nbNodes /= 2;
- notInSet.insert( f1 );
- notInSet.insert( f2 );
- for ( int i = 0; i < nbNodes; ++i ) {
- const SMDS_MeshNode* n1 = faceToKeep->GetNode( i );
- const SMDS_MeshNode* n2 = faceToKeep->GetNode(( i+1 ) % nbNodes );
- f1 = SMESH_MeshEditor::FindFaceInSet( n1, n2, inSet, notInSet );
- if ( f1 )
- elems.insert( f1 );
- }
- } // case on a sphere
- } // loop on 2 faces
-
- // int quadFactor = (*Elems1.begin())->IsQuadratic() ? 2 : 1;
+ gp_Pnt2d uv1 = helper->GetNodeUV( face, vNode, notSeamNode[0] );
+ gp_Pnt2d uv2 = helper->GetNodeUV( face, vNode, notSeamNode[1] );
+ if ( uv1.X() + uv1.Y() > uv2.X() + uv2.Y() )
+ faceToKeep = f2;
+ else
+ faceToKeep = f1;
+
+ // fill elem set
+ elems.insert( faceToKeep );
+ while ( eIt->more() ) {
+ const SMDS_MeshElement* f = eIt->next();
+ int nbNodes = f->NbNodes();
+ if ( f->IsQuadratic() )
+ nbNodes /= 2;
+ bool onBnd = false;
+ for ( int i = 0; !onBnd && i < nbNodes; ++i ) {
+ const SMDS_MeshNode* node = f->GetNode( i );
+ onBnd = ( node->GetPosition()->GetTypeOfPosition() != SMDS_TOP_FACE);
+ }
+ if ( !onBnd )
+ elems.insert( f );
+ }
+ // add also faces adjacent to faceToKeep
+ int nbNodes = faceToKeep->NbNodes();
+ if ( faceToKeep->IsQuadratic() ) nbNodes /= 2;
+ notInSet.insert( f1 );
+ notInSet.insert( f2 );
+ for ( int i = 0; i < nbNodes; ++i ) {
+ const SMDS_MeshNode* n1 = faceToKeep->GetNode( i );
+ const SMDS_MeshNode* n2 = faceToKeep->GetNode(( i+1 ) % nbNodes );
+ f1 = SMESH_MeshAlgos::FindFaceInSet( n1, n2, inSet, notInSet );
+ if ( f1 )
+ elems.insert( f1 );
+ }
+ } // case on a sphere
+ } // loop on 2 faces
+
+ node1To2Map.clear();
+ assocRes = SMESH_MeshEditor::FindMatchingNodes( Elems1, Elems2,
+ vNode1, vNode2,
+ eNode1[0], eNode2[0],
+ node1To2Map);
+ if (( assocRes != SMESH_MeshEditor::SEW_OK ) &&
+ ( eNode1[1] || eNode2[1] )) // there is another node to try (on a closed EDGE)
+ {
+ node1To2Map.clear();
+ if ( eNode1[1] ) std::swap( eNode1[0], eNode1[1] );
+ else std::swap( eNode2[0], eNode2[1] );
+ continue; // one more attempt
+ }
- node1To2Map.clear();
- int res = SMESH_MeshEditor::FindMatchingNodes( Elems1, Elems2,
- vNode1, vNode2,
- eNode1[0], eNode2[0],
- node1To2Map);
- if ( res != SMESH_MeshEditor::SEW_OK )
- RETURN_BAD_RESULT("FindMatchingNodes() result " << res );
+ break;
+ }
+ if ( assocRes != SMESH_MeshEditor::SEW_OK )
+ RETURN_BAD_RESULT("FindMatchingNodes() result " << assocRes );
// On a sphere, add matching nodes on the edge
SMDS_NodeIteratorPtr nIt = edgeSM->GetNodes();
while ( nIt->more() ) {
const SMDS_MeshNode* node = nIt->next();
- const SMDS_EdgePosition* pos =
- static_cast<const SMDS_EdgePosition*>(node->GetPosition());
+ SMDS_EdgePositionPtr pos = node->GetPosition();
pos2nodes.insert( make_pair( pos->GetUParameter(), node ));
}
- if ( pos2nodes.size() != edgeSM->NbNodes() )
+ if ((int) pos2nodes.size() != edgeSM->NbNodes() )
RETURN_BAD_RESULT("Equal params of nodes on edge "
<< smDS->ShapeToIndex( edge ) << " of face " << is2 );
}
node1To2Map.insert( make_pair( vNode1, vNode2 ));
}
-// don't know why this condition is usually true :(
-// if ( node1To2Map.size() * quadFactor < SM1->NbNodes() )
-// MESSAGE("FindMatchingNodes() found too few node pairs starting from nodes ("
-// << vNode1->GetID() << " - " << eNode1[0]->GetID() << ") ("
-// << vNode2->GetID() << " - " << eNode2[0]->GetID() << "):"
-// << node1To2Map.size() * quadFactor << " < " << SM1->NbNodes());
-
+ // don't know why this condition is usually true :(
+ // if ( node1To2Map.size() * quadFactor < SM1->NbNodes() )
+ // MESSAGE("FindMatchingNodes() found too few node pairs starting from nodes ("
+ // << vNode1->GetID() << " - " << eNode1[0]->GetID() << ") ("
+ // << vNode2->GetID() << " - " << eNode2[0]->GetID() << "):"
+ // << node1To2Map.size() * quadFactor << " < " << SM1->NbNodes());
+
return true;
}
//================================================================================
- /*!
- * \brief Return any sub-shape of a face belonging to the outer wire
- * \param face - the face
- * \param type - type of sub-shape to return
- * \retval TopoDS_Shape - the found sub-shape
- */
+/*
+ * Return any sub-shape of a face belonging to the outer wire
+ * \param face - the face
+ * \param type - type of sub-shape to return
+ * \retval TopoDS_Shape - the found sub-shape
+ */
//================================================================================
TopoDS_Shape StdMeshers_ProjectionUtils::OuterShape( const TopoDS_Face& face,
}
//================================================================================
- /*!
- * \brief Check that submesh is computed and try to compute it if is not
- * \param sm - submesh to compute
- * \param iterationNb - int used to stop infinite recursive call
- * \retval bool - true if computed
- */
+/*
+ * Check that sub-mesh is computed and try to compute it if is not
+ * \param sm - sub-mesh to compute
+ * \param iterationNb - int used to stop infinite recursive call
+ * \retval bool - true if computed
+ */
//================================================================================
bool StdMeshers_ProjectionUtils::MakeComputed(SMESH_subMesh * sm, const int iterationNb)
if ( sm->IsMeshComputed() )
return true;
- SMESH_Mesh* mesh = sm->GetFather();
- SMESH_Gen* gen = mesh->GetGen();
- SMESH_Algo* algo = sm->GetAlgo();
+ SMESH_Mesh* mesh = sm->GetFather();
+ SMESH_Gen* gen = mesh->GetGen();
+ SMESH_Algo* algo = sm->GetAlgo();
+ TopoDS_Shape shape = sm->GetSubShape();
if ( !algo )
{
- if ( sm->GetSubShape().ShapeType() != TopAbs_COMPOUND )
- RETURN_BAD_RESULT("No algo assigned to submesh " << sm->GetId());
- // group
- bool computed = true;
- for ( TopoDS_Iterator grMember( sm->GetSubShape() ); grMember.More(); grMember.Next())
- if ( SMESH_subMesh* grSub = mesh->GetSubMesh( grMember.Value() ))
- if ( !MakeComputed( grSub, iterationNb + 1 ))
- computed = false;
- return computed;
+ if ( shape.ShapeType() != TopAbs_COMPOUND )
+ {
+ // No algo assigned to a non-compound sub-mesh.
+ // Try to find an all-dimensional algo of an upper dimension
+ int dim = gen->GetShapeDim( shape );
+ for ( ++dim; ( dim <= 3 && !algo ); ++dim )
+ {
+ SMESH_HypoFilter hypoFilter( SMESH_HypoFilter::IsAlgo() );
+ hypoFilter.And( SMESH_HypoFilter::HasDim( dim ));
+ list <const SMESHDS_Hypothesis * > hyps;
+ list< TopoDS_Shape > assignedTo;
+ int nbAlgos =
+ mesh->GetHypotheses( shape, hypoFilter, hyps, true, &assignedTo );
+ if ( nbAlgos > 1 ) // concurrent algos
+ {
+ vector<SMESH_subMesh*> smList; // where an algo is assigned
+ list< TopoDS_Shape >::iterator shapeIt = assignedTo.begin();
+ for ( ; shapeIt != assignedTo.end(); ++shapeIt )
+ smList.push_back( mesh->GetSubMesh( *shapeIt ));
+
+ mesh->SortByMeshOrder( smList );
+ algo = smList.front()->GetAlgo();
+ shape = smList.front()->GetSubShape();
+ }
+ else if ( nbAlgos == 1 )
+ {
+ algo = (SMESH_Algo*) hyps.front();
+ shape = assignedTo.front();
+ }
+ }
+ if ( !algo )
+ return false;
+ }
+ else
+ {
+ // group
+ bool computed = true;
+ for ( TopoDS_Iterator grMember( shape ); grMember.More(); grMember.Next())
+ if ( SMESH_subMesh* grSub = mesh->GetSubMesh( grMember.Value() ))
+ if ( !MakeComputed( grSub, iterationNb + 1 ))
+ computed = false;
+ return computed;
+ }
}
string algoType = algo->GetName();
if ( algoType.substr(0, 11) != "Projection_")
- return gen->Compute( *mesh, sm->GetSubShape() );
+ return gen->Compute( *mesh, shape, SMESH_Gen::SHAPE_ONLY );
// try to compute source mesh
const list <const SMESHDS_Hypothesis *> & hyps =
- algo->GetUsedHypothesis( *mesh, sm->GetSubShape() );
+ algo->GetUsedHypothesis( *mesh, shape );
TopoDS_Shape srcShape;
SMESH_Mesh* srcMesh = 0;
}
}
if ( srcShape.IsNull() ) // no projection source defined
- return gen->Compute( *mesh, sm->GetSubShape() );
+ return gen->Compute( *mesh, shape, /*shapeOnly=*/true );
- if ( srcShape.IsSame( sm->GetSubShape() ))
+ if ( srcShape.IsSame( shape ))
RETURN_BAD_RESULT("Projection from self");
if ( !srcMesh )
srcMesh = mesh;
- if ( MakeComputed( srcMesh->GetSubMesh( srcShape ), iterationNb + 1 ))
- return gen->Compute( *mesh, sm->GetSubShape() );
+ if ( MakeComputed( srcMesh->GetSubMesh( srcShape ), iterationNb + 1 ) &&
+ gen->Compute( *mesh, shape, SMESH_Gen::SHAPE_ONLY ))
+ return sm->IsMeshComputed();
return false;
}
+
//================================================================================
-/*!
- * \brief Count nb of sub-shapes
- * \param shape - the shape
- * \param type - the type of sub-shapes to count
- * \retval int - the calculated number
+/*
+ * Returns an error message to show in case if MakeComputed( sm ) fails.
*/
//================================================================================
-int StdMeshers_ProjectionUtils::Count(const TopoDS_Shape& shape,
- const TopAbs_ShapeEnum type,
- const bool ignoreSame)
+std::string StdMeshers_ProjectionUtils::SourceNotComputedError( SMESH_subMesh * sm,
+ SMESH_Algo* projAlgo )
{
- if ( ignoreSame ) {
- TopTools_IndexedMapOfShape map;
- TopExp::MapShapes( shape, type, map );
- return map.Extent();
- }
- else {
- int nb = 0;
- for ( TopExp_Explorer exp( shape, type ); exp.More(); exp.Next() )
- ++nb;
- return nb;
+ const char usualMessage [] = "Source mesh not computed";
+ if ( !projAlgo )
+ return usualMessage;
+ if ( !sm || sm->GetAlgoState() != SMESH_subMesh::NO_ALGO )
+ return usualMessage; // algo is OK, anything else is KO.
+
+ // Try to find a type of all-dimensional algorithm that would compute the
+ // given sub-mesh if it could be launched before projection
+ const TopoDS_Shape shape = sm->GetSubShape();
+ const int shapeDim = SMESH_Gen::GetShapeDim( shape );
+
+ for ( int dimIncrement = 1; shapeDim + dimIncrement < 4; ++dimIncrement )
+ {
+ SMESH_HypoFilter filter( SMESH_HypoFilter::IsAlgo() );
+ filter.And( filter.HasDim( shapeDim + dimIncrement ));
+
+ SMESH_Algo* algo = (SMESH_Algo*) sm->GetFather()->GetHypothesis( shape, filter, true );
+ if ( algo && !algo->NeedDiscreteBoundary() )
+ return SMESH_Comment("\"")
+ << algo->GetFeatures()._label << "\""
+ << " can't be used to compute the source mesh for \""
+ << projAlgo->GetFeatures()._label << "\" in this case";
}
+ return usualMessage;
}
//================================================================================
-/*!
- * \brief Return a boundary EDGE of edgeContainer
+/*
+ * Return a boundary EDGE (or all boundary EDGEs) of edgeContainer
*/
//================================================================================
-TopoDS_Edge StdMeshers_ProjectionUtils::GetBoundaryEdge(const TopoDS_Shape& edgeContainer,
- const SMESH_Mesh& mesh)
+TopoDS_Edge
+StdMeshers_ProjectionUtils::GetBoundaryEdge(const TopoDS_Shape& edgeContainer,
+ const SMESH_Mesh& mesh,
+ std::list< TopoDS_Edge >* allBndEdges)
{
TopTools_IndexedMapOfShape facesOfEdgeContainer, facesNearEdge;
TopExp::MapShapes( edgeContainer, TopAbs_FACE, facesOfEdgeContainer );
if ( facesOfEdgeContainer.Contains( *face ))
if ( facesNearEdge.Add( *face ) && facesNearEdge.Extent() > 1 )
break;
- if ( facesNearEdge.Extent() == 1 )
- return edge;
+ if ( facesNearEdge.Extent() == 1 ) {
+ if ( allBndEdges )
+ allBndEdges->push_back( edge );
+ else
+ return edge;
+ }
}
return TopoDS_Edge();
namespace { // Definition of event listeners
- SMESH_subMeshEventListener* GetSrcSubMeshListener();
+ SMESH_subMeshEventListener* getSrcSubMeshListener();
//================================================================================
/*!
eventType == SMESH_subMesh::ALGO_EVENT)
{
// delete current source listener
- subMesh->DeleteEventListener( GetSrcSubMeshListener() );
+ subMesh->DeleteEventListener( getSrcSubMeshListener() );
// let algo set a new one
if ( SMESH_Algo* algo = subMesh->GetAlgo() )
algo->SetEventListener( subMesh );
*/
//================================================================================
- SMESH_subMeshEventListener* GetHypModifWaiter() {
+ SMESH_subMeshEventListener* getHypModifWaiter() {
static HypModifWaiter aHypModifWaiter;
return &aHypModifWaiter;
}
*/
//================================================================================
- SMESH_subMeshEventListener* GetSrcSubMeshListener() {
+ SMESH_subMeshEventListener* getSrcSubMeshListener() {
static SMESH_subMeshEventListener srcListener(false, // won't be deleted by submesh
"StdMeshers_ProjectionUtils::SrcSubMeshListener");
return &srcListener;
}
//================================================================================
-/*!
- * \brief Set event listeners to submesh with projection algo
- * \param subMesh - submesh with projection algo
- * \param srcShape - source shape
- * \param srcMesh - source mesh
+/*
+ * Set event listeners to submesh with projection algo
+ * \param subMesh - submesh with projection algo
+ * \param srcShape - source shape
+ * \param srcMesh - source mesh
*/
//================================================================================
TopoDS_Shape srcShape,
SMESH_Mesh* srcMesh)
{
- // Set listener that resets an event listener on source submesh when
+ // Set the listener that resets an event listener on source submesh when
// "ProjectionSource*D" hypothesis is modified since source shape can be changed
- subMesh->SetEventListener( GetHypModifWaiter(),0,subMesh);
+ subMesh->SetEventListener( getHypModifWaiter(),0,subMesh);
// Set an event listener to submesh of the source shape
if ( !srcShape.IsNull() )
if ( srcSM != subMesh )
{
SMESH_subMeshEventListenerData* data =
- srcSM->GetEventListenerData(GetSrcSubMeshListener());
+ srcSM->GetEventListenerData(getSrcSubMeshListener());
if ( data )
data->mySubMeshes.push_back( subMesh );
else
data = SMESH_subMeshEventListenerData::MakeData( subMesh );
- subMesh->SetEventListener ( GetSrcSubMeshListener(), data, srcSM );
+ subMesh->SetEventListener ( getSrcSubMeshListener(), data, srcSM );
}
}
}
else
{
- subMesh->SetEventListener( GetSrcSubMeshListener(),
- SMESH_subMeshEventListenerData::MakeData( subMesh ),
- srcShapeSM );
+ if ( SMESH_subMeshEventListenerData* data =
+ srcShapeSM->GetEventListenerData( getSrcSubMeshListener() ))
+ {
+ bool alreadyIn =
+ (std::find( data->mySubMeshes.begin(),
+ data->mySubMeshes.end(), subMesh ) != data->mySubMeshes.end() );
+ if ( !alreadyIn )
+ data->mySubMeshes.push_back( subMesh );
+ }
+ else
+ {
+ subMesh->SetEventListener( getSrcSubMeshListener(),
+ SMESH_subMeshEventListenerData::MakeData( subMesh ),
+ srcShapeSM );
+ }
}
}
}
}
+
+namespace StdMeshers_ProjectionUtils
+{
+
+ //================================================================================
+ /*!
+ * \brief Computes transformation between two sets of 2D points using
+ * a least square approximation
+ *
+ * See "Surface Mesh Projection For Hexahedral Mesh Generation By Sweeping"
+ * by X.Roca, J.Sarrate, A.Huerta. (2.2)
+ */
+ //================================================================================
+
+ bool TrsfFinder2D::Solve( const vector< gp_XY >& srcPnts,
+ const vector< gp_XY >& tgtPnts )
+ {
+ // find gravity centers
+ gp_XY srcGC( 0,0 ), tgtGC( 0,0 );
+ for ( size_t i = 0; i < srcPnts.size(); ++i )
+ {
+ srcGC += srcPnts[i];
+ tgtGC += tgtPnts[i];
+ }
+ srcGC /= srcPnts.size();
+ tgtGC /= tgtPnts.size();
+
+ // find trsf
+
+ math_Matrix mat (1,4,1,4, 0.);
+ math_Vector vec (1,4, 0.);
+
+ // cout << "m1 = smesh.Mesh('src')" << endl
+ // << "m2 = smesh.Mesh('tgt')" << endl;
+ double xx = 0, xy = 0, yy = 0;
+ for ( size_t i = 0; i < srcPnts.size(); ++i )
+ {
+ gp_XY srcUV = srcPnts[i] - srcGC;
+ gp_XY tgtUV = tgtPnts[i] - tgtGC;
+ xx += srcUV.X() * srcUV.X();
+ yy += srcUV.Y() * srcUV.Y();
+ xy += srcUV.X() * srcUV.Y();
+ vec( 1 ) += srcUV.X() * tgtUV.X();
+ vec( 2 ) += srcUV.Y() * tgtUV.X();
+ vec( 3 ) += srcUV.X() * tgtUV.Y();
+ vec( 4 ) += srcUV.Y() * tgtUV.Y();
+ // cout << "m1.AddNode( " << srcUV.X() << ", " << srcUV.Y() << ", 0 )" << endl
+ // << "m2.AddNode( " << tgtUV.X() << ", " << tgtUV.Y() << ", 0 )" << endl;
+ }
+ mat( 1,1 ) = mat( 3,3 ) = xx;
+ mat( 2,2 ) = mat( 4,4 ) = yy;
+ mat( 1,2 ) = mat( 2,1 ) = mat( 3,4 ) = mat( 4,3 ) = xy;
+
+ math_Gauss solver( mat );
+ if ( !solver.IsDone() )
+ return false;
+ solver.Solve( vec );
+ if ( vec.Norm2() < gp::Resolution() )
+ return false;
+ // cout << vec( 1 ) << "\t " << vec( 2 ) << endl
+ // << vec( 3 ) << "\t " << vec( 4 ) << endl;
+
+ _trsf.SetTranslationPart( tgtGC );
+ _srcOrig = srcGC;
+
+ gp_Mat2d& M = const_cast< gp_Mat2d& >( _trsf.VectorialPart());
+ M( 1,1 ) = vec( 1 );
+ M( 2,1 ) = vec( 2 ); // | 1 3 | -- is it correct ????????
+ M( 1,2 ) = vec( 3 ); // | 2 4 |
+ M( 2,2 ) = vec( 4 );
+
+ return true;
+ }
+
+ //================================================================================
+ /*!
+ * \brief Transforms a 2D points using a found transformation
+ */
+ //================================================================================
+
+ gp_XY TrsfFinder2D::Transform( const gp_Pnt2d& srcUV ) const
+ {
+ gp_XY uv = srcUV.XY() - _srcOrig ;
+ _trsf.Transforms( uv );
+ return uv;
+ }
+
+ //================================================================================
+ /*!
+ * \brief Computes transformation between two sets of 3D points using
+ * a least square approximation
+ *
+ * See "Surface Mesh Projection For Hexahedral Mesh Generation By Sweeping"
+ * by X.Roca, J.Sarrate, A.Huerta. (2.4)
+ */
+ //================================================================================
+
+ bool TrsfFinder3D::Solve( const vector< gp_XYZ > & srcPnts,
+ const vector< gp_XYZ > & tgtPnts )
+ {
+ // find gravity center
+ gp_XYZ srcGC( 0,0,0 ), tgtGC( 0,0,0 );
+ for ( size_t i = 0; i < srcPnts.size(); ++i )
+ {
+ srcGC += srcPnts[i];
+ tgtGC += tgtPnts[i];
+ }
+ srcGC /= srcPnts.size();
+ tgtGC /= tgtPnts.size();
+
+ gp_XYZ srcOrig = 2 * srcGC - tgtGC;
+ gp_XYZ tgtOrig = srcGC;
+
+ // find trsf
+
+ math_Matrix mat (1,9,1,9, 0.);
+ math_Vector vec (1,9, 0.);
+
+ double xx = 0, yy = 0, zz = 0;
+ double xy = 0, xz = 0, yz = 0;
+ for ( size_t i = 0; i < srcPnts.size(); ++i )
+ {
+ gp_XYZ src = srcPnts[i] - srcOrig;
+ gp_XYZ tgt = tgtPnts[i] - tgtOrig;
+ xx += src.X() * src.X();
+ yy += src.Y() * src.Y();
+ zz += src.Z() * src.Z();
+ xy += src.X() * src.Y();
+ xz += src.X() * src.Z();
+ yz += src.Y() * src.Z();
+ vec( 1 ) += src.X() * tgt.X();
+ vec( 2 ) += src.Y() * tgt.X();
+ vec( 3 ) += src.Z() * tgt.X();
+ vec( 4 ) += src.X() * tgt.Y();
+ vec( 5 ) += src.Y() * tgt.Y();
+ vec( 6 ) += src.Z() * tgt.Y();
+ vec( 7 ) += src.X() * tgt.Z();
+ vec( 8 ) += src.Y() * tgt.Z();
+ vec( 9 ) += src.Z() * tgt.Z();
+ }
+ mat( 1,1 ) = mat( 4,4 ) = mat( 7,7 ) = xx;
+ mat( 2,2 ) = mat( 5,5 ) = mat( 8,8 ) = yy;
+ mat( 3,3 ) = mat( 6,6 ) = mat( 9,9 ) = zz;
+ mat( 1,2 ) = mat( 2,1 ) = mat( 4,5 ) = mat( 5,4 ) = mat( 7,8 ) = mat( 8,7 ) = xy;
+ mat( 1,3 ) = mat( 3,1 ) = mat( 4,6 ) = mat( 6,4 ) = mat( 7,9 ) = mat( 9,7 ) = xz;
+ mat( 2,3 ) = mat( 3,2 ) = mat( 5,6 ) = mat( 6,5 ) = mat( 8,9 ) = mat( 9,8 ) = yz;
+
+ math_Gauss solver( mat );
+ if ( !solver.IsDone() )
+ return false;
+ solver.Solve( vec );
+ if ( vec.Norm2() < gp::Resolution() )
+ return false;
+ // cout << endl
+ // << vec( 1 ) << "\t " << vec( 2 ) << "\t " << vec( 3 ) << endl
+ // << vec( 4 ) << "\t " << vec( 5 ) << "\t " << vec( 6 ) << endl
+ // << vec( 7 ) << "\t " << vec( 8 ) << "\t " << vec( 9 ) << endl;
+
+ _srcOrig = srcOrig;
+ _trsf.SetTranslationPart( tgtOrig );
+
+ gp_Mat& M = const_cast< gp_Mat& >( _trsf.VectorialPart() );
+ M.SetRows( gp_XYZ( vec( 1 ), vec( 2 ), vec( 3 )),
+ gp_XYZ( vec( 4 ), vec( 5 ), vec( 6 )),
+ gp_XYZ( vec( 7 ), vec( 8 ), vec( 9 )));
+ return true;
+ }
+
+ //================================================================================
+ /*!
+ * \brief Transforms a 3D point using a found transformation
+ */
+ //================================================================================
+
+ gp_XYZ TrsfFinder3D::Transform( const gp_Pnt& srcP ) const
+ {
+ gp_XYZ p = srcP.XYZ() - _srcOrig;
+ _trsf.Transforms( p );
+ return p;
+ }
+
+ //================================================================================
+ /*!
+ * \brief Transforms a 3D vector using a found transformation
+ */
+ //================================================================================
+
+ gp_XYZ TrsfFinder3D::TransformVec( const gp_Vec& v ) const
+ {
+ return v.XYZ().Multiplied( _trsf.VectorialPart() );
+ }
+ //================================================================================
+ /*!
+ * \brief Inversion
+ */
+ //================================================================================
+
+ bool TrsfFinder3D::Invert()
+ {
+ if (( _trsf.Form() == gp_Translation ) &&
+ ( _srcOrig.X() != 0 || _srcOrig.Y() != 0 || _srcOrig.Z() != 0 ))
+ {
+ // seems to be defined via Solve()
+ gp_XYZ newSrcOrig = _trsf.TranslationPart();
+ gp_Mat& M = const_cast< gp_Mat& >( _trsf.VectorialPart() );
+ const double D = M.Determinant();
+ if ( D < 1e-3 * ( newSrcOrig - _srcOrig ).Modulus() )
+ {
+#ifdef _DEBUG_
+ cerr << "TrsfFinder3D::Invert()"
+ << "D " << M.Determinant() << " IsSingular " << M.IsSingular() << endl;
+#endif
+ return false;
+ }
+ gp_Mat Minv = M.Inverted();
+ _trsf.SetTranslationPart( _srcOrig );
+ _srcOrig = newSrcOrig;
+ M = Minv;
+ }
+ else
+ {
+ _trsf.Invert();
+ }
+ return true;
+ }
+
+ //================================================================================
+ /*!
+ * \brief triangulate the srcFace in 2D
+ * \param [in] srcWires - boundary of the src FACE
+ */
+ //================================================================================
+
+ Morph::Morph(const TSideVector& srcWires):
+ _delaunay( srcWires, /*checkUV=*/true )
+ {
+ _srcSubMesh = srcWires[0]->GetMesh()->GetSubMesh( srcWires[0]->Face() );
+ }
+
+ //================================================================================
+ /*!
+ * \brief Move non-marked target nodes
+ * \param [in,out] tgtHelper - helper
+ * \param [in] tgtWires - boundary nodes of the target FACE; must be in the
+ * same order as the nodes in srcWires given in the constructor
+ * \param [in] src2tgtNodes - map of src -> tgt nodes
+ * \param [in] moveAll - to move all nodes; if \c false, move only non-marked nodes
+ * \return bool - Ok or not
+ */
+ //================================================================================
+
+ bool Morph::Perform(SMESH_MesherHelper& tgtHelper,
+ const TSideVector& tgtWires,
+ Handle(ShapeAnalysis_Surface) tgtSurface,
+ const TNodeNodeMap& src2tgtNodes,
+ const bool moveAll)
+ {
+ // get tgt boundary points corresponding to src boundary nodes
+ size_t nbP = 0;
+ for ( size_t iW = 0; iW < tgtWires.size(); ++iW )
+ nbP += tgtWires[iW]->NbPoints() - 1; // 1st and last points coincide
+ if ( nbP != _delaunay.GetBndNodes().size() )
+ return false;
+
+ std::vector< gp_XY > tgtUV( nbP );
+ for ( size_t iW = 0, iP = 0; iW < tgtWires.size(); ++iW )
+ {
+ const UVPtStructVec& tgtPnt = tgtWires[iW]->GetUVPtStruct();
+ for ( int i = 0, nb = tgtPnt.size() - 1; i < nb; ++i, ++iP )
+ {
+ tgtUV[ iP ] = tgtPnt[i].UV();
+ }
+ }
+
+ SMESHDS_Mesh* tgtMesh = tgtHelper.GetMeshDS();
+ const SMDS_MeshNode *srcNode, *tgtNode;
+
+ // un-mark internal src nodes in order iterate them using _delaunay
+ int nbSrcNodes = 0;
+ SMDS_NodeIteratorPtr nIt = _srcSubMesh->GetSubMeshDS()->GetNodes();
+ if ( !nIt || !nIt->more() ) return true;
+ if ( moveAll )
+ {
+ nbSrcNodes = _srcSubMesh->GetSubMeshDS()->NbNodes();
+ while ( nIt->more() )
+ nIt->next()->setIsMarked( false );
+ }
+ else
+ {
+ while ( nIt->more() )
+ nbSrcNodes += int( !nIt->next()->isMarked() );
+ }
+
+ // Move tgt nodes
+
+ double bc[3]; // barycentric coordinates
+ int nodeIDs[3]; // nodes of a delaunay triangle
+
+ _delaunay.InitTraversal( nbSrcNodes );
+
+ while (( srcNode = _delaunay.NextNode( bc, nodeIDs )))
+ {
+ // compute new coordinates for a corresponding tgt node
+ gp_XY uvNew( 0., 0. ), nodeUV;
+ for ( int i = 0; i < 3; ++i )
+ uvNew += bc[i] * tgtUV[ nodeIDs[i]];
+ gp_Pnt xyz = tgtSurface->Value( uvNew );
+
+ // find and move tgt node
+ TNodeNodeMap::const_iterator n2n = src2tgtNodes.find( srcNode );
+ if ( n2n == src2tgtNodes.end() ) continue;
+ tgtNode = n2n->second;
+ tgtMesh->MoveNode( tgtNode, xyz.X(), xyz.Y(), xyz.Z() );
+
+ if ( SMDS_FacePositionPtr pos = tgtNode->GetPosition() )
+ pos->SetParameters( uvNew.X(), uvNew.Y() );
+
+ --nbSrcNodes;
+ }
+
+ return nbSrcNodes == 0;
+
+ } // Morph::Perform
+
+ //=======================================================================
+ //function : Delaunay
+ //purpose : construct from face sides
+ //=======================================================================
+
+ Delaunay::Delaunay( const TSideVector& wires, bool checkUV ):
+ SMESH_Delaunay( SideVector2UVPtStructVec( wires ),
+ TopoDS::Face( wires[0]->FaceHelper()->GetSubShape() ),
+ wires[0]->FaceHelper()->GetSubShapeID() )
+ {
+ _wire = wires[0]; // keep a wire to assure _helper to keep alive
+ _helper = _wire->FaceHelper();
+ _checkUVPtr = checkUV ? & _checkUV : 0;
+ }
+
+ //=======================================================================
+ //function : Delaunay
+ //purpose : construct from UVPtStructVec's
+ //=======================================================================
+
+ Delaunay::Delaunay( const std::vector< const UVPtStructVec* > & boundaryNodes,
+ SMESH_MesherHelper& faceHelper,
+ bool checkUV):
+ SMESH_Delaunay( boundaryNodes,
+ TopoDS::Face( faceHelper.GetSubShape() ),
+ faceHelper.GetSubShapeID() )
+ {
+ _helper = & faceHelper;
+ _checkUVPtr = checkUV ? & _checkUV : 0;
+ }
+
+ //=======================================================================
+ //function : getNodeUV
+ //purpose :
+ //=======================================================================
+
+ gp_XY Delaunay::getNodeUV( const TopoDS_Face& face, const SMDS_MeshNode* node ) const
+ {
+ return _helper->GetNodeUV( face, node, 0, _checkUVPtr );
+ }
+
+
+} // namespace StdMeshers_ProjectionUtils