id="Sketch"
nested="SketchPoint SketchIntersectionPoint SketchLine
SketchCircle SketchMacroCircle SketchArc SketchMacroArc
- SketchEllipse SketchMacroEllipse
+ SketchEllipse SketchMacroEllipse SketchEllipticArc SketchMacroEllipticArc
SketchRectangle
SketchProjection
SketchConstraintLength SketchConstraintRadius SketchConstraintDistance SketchConstraintDistanceHorizontal SketchConstraintDistanceVertical
enable_value="enable_by_preferences"/>
<sketch-2dpoint_selector id="EndPoint" accept_expressions="0" title="End point" tooltip="End point coordinates"
enable_value="enable_by_preferences"/>
- <labelvalue id="LineLength" accept_expressions="0" label="Length:" default="computed" icon="icons/Sketch/distance_value.png"
+ <labelvalue id="LineLength" accept_expressions="0" label="Length" default="computed" icon="icons/Sketch/distance_value.png"
tooltip="Line length" obligatory="0" enable_value="false"/>
<boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
<validator id="GeomValidators_Different" parameters="StartPoint,EndPoint"/>
</feature>
</group>
- <group id="Circular geometry">
+ <group id="Conical geometry">
<!-- SketchCircle is a hidden feature. It is created inside SketchMacroCircle. -->
<feature id="SketchCircle"
title="Circle"
enable_value="enable_by_preferences"/>
<labelvalue id="circle_radius"
icon="icons/Sketch/radius.png"
- label="Radius:"
+ label="Radius"
tooltip="Set radius"
default="computed"
accept_expressions="0"
</toolbox>
<labelvalue id="circle_radius"
icon="icons/Sketch/radius.png"
- label="Radius:"
+ label="Radius"
tooltip="Set radius"
default="computed"
accept_expressions="0"
<validator id="GeomValidators_Different" parameters="center_point,start_point,end_point"/>
<labelvalue id="radius"
icon="icons/Sketch/radius.png"
- label="Radius:"
+ label="Radius"
tooltip="Set radius"
accept_expressions="0"
min="0"
</labelvalue>
<labelvalue id="angle"
icon="icons/Sketch/angle.png"
- label="Angle:"
+ label="Angle"
tooltip="Set angle"
default="0"
use_reset="false"
</toolbox>
<labelvalue id="radius"
icon="icons/Sketch/radius.png"
- label="Radius:"
+ label="Radius"
tooltip="Set radius"
accept_expressions="0"
min="0"
</labelvalue>
<labelvalue id="angle"
icon="icons/Sketch/angle.png"
- label="Angle:"
+ label="Angle"
tooltip="Set angle"
default="0"
use_reset="false"
</sketch_shape_selector>
<!--<validator id="PartSet_FilletSelection"/>-->
</feature>
- <!-- SketchSplit -->
- <feature id="SketchSplit" title="Split"
- tooltip="Cut selected segment arc or circle on existing coincident points"
- icon="icons/Sketch/split.png"
- helpfile="splitFeature.html">
- <sketch_feature_point_selector
- id="SelectedObject"
- selection_attributes="SelectedObject SelectedPoint PreviewObject PreviewPoint"
- label="Segment"
- tooltip="Select segment for split"
- shape_types="edge"
- use_external="false">
- <validator id="SketchPlugin_SplitValidator"/>
- </sketch_feature_point_selector>
- <validator id="PartSet_SplitSelection"/>
- </feature>
- <!-- SketchTrim -->
- <feature id="SketchTrim" title="Trim"
- tooltip="Trim selected segment arc or circle on intersection points nearest to the graphic selection"
- icon="icons/Sketch/trim.png"
- helpfile="trimFeature.html">
- <sketch_feature_point_selector
- id="SelectedObject"
- selection_attributes="SelectedObject SelectedPoint PreviewObject PreviewPoint"
- label="Segment"
- tooltip="Select segment for trim"
- shape_types="edge"
- use_external="false">
- <validator id="SketchPlugin_TrimValidator"/>
- </sketch_feature_point_selector>
- <validator id="PartSet_SplitSelection"/>
- </feature>
- </group>
- <group id="Elliptic geometry">
<!-- SketchEllipse is a hidden feature. It is created inside SketchMacroEllipse. -->
<feature id="SketchEllipse"
title="Ellipse"
enable_value="enable_by_preferences"/>
<labelvalue id="ellipse_major_radius"
icon="icons/Sketch/radius_major.png"
- label="Major radius:"
+ label="Major radius"
tooltip="Set major radius"
default="computed"
accept_expressions="0"
</labelvalue>
<labelvalue id="ellipse_minor_radius"
icon="icons/Sketch/radius_minor.png"
- label="Minor radius:"
+ label="Minor radius"
tooltip="Set minor radius"
default="computed"
accept_expressions="0"
title="Passed point"
tooltip="Passed point coordinates"
accept_expressions="0"
- enable_value="enable_by_preferences">
- <!-- <validator id="SketchPlugin_CirclePassedPointValidator"/> -->
- </sketch-2dpoint_selector>
+ enable_value="enable_by_preferences"/>
</box>
<box id="by_major_axis_and_point"
icon="icons/Sketch/ellipse_axes_32x32.png"
enable_value="enable_by_preferences"/>
</box>
</toolbox>
-<!-- <validator id="GeomValidators_Different" parameters="center_point_ref,passed_point_ref"/> -->
<labelvalue id="major_radius"
icon="icons/Sketch/radius_major.png"
- label="Major radius:"
+ label="Major radius"
+ tooltip="Set major radius"
+ default="computed"
+ accept_expressions="0"
+ obligatory="0"
+ enable_value="enable_by_preferences">
+ <validator id="GeomValidators_Positive"/>
+ </labelvalue>
+ <labelvalue id="minor_radius"
+ icon="icons/Sketch/radius_minor.png"
+ label="Minor radius"
+ tooltip="Set minor radius"
+ default="computed"
+ accept_expressions="0"
+ obligatory="0"
+ enable_value="enable_by_preferences">
+ <validator id="GeomValidators_Positive"/>
+ </labelvalue>
+ <boolvalue id="Auxiliary"
+ tooltip="Construction element"
+ label="Auxiliary"
+ default="false"
+ obligatory="0"/>
+ </feature>
+
+ <!-- SketchEllipticArc is a hidden feature. It is created inside SketchMacroEllipse. -->
+ <feature id="SketchEllipticArc"
+ title="Elliptic arc"
+ tooltip="Create elliptic arc"
+ icon="icons/Sketch/elliptic_arc.png"
+ internal="1">
+ <sketch-2dpoint_selector id="ellipse_center"
+ title="Center"
+ tooltip="Center coordinates"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="ellipse_first_focus"
+ title="First focus"
+ tooltip="Focus coordinates"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="ellipse_second_focus"
+ title="Second focus"
+ tooltip="Focus coordinates"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="ellipse_major_axis_start_point"
+ title="Major axis start"
+ tooltip="Coordinates of point on negative direction of major axis"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="ellipse_major_axis_end_point"
+ title="Major axis end"
+ tooltip="Coordinates of point on positive direction of major axis"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="ellipse_minor_axis_start_point"
+ title="Minor axis start"
+ tooltip="Coordinates of point on negative direction of minor axis"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="ellipse_minor_axis_end_point"
+ title="Minor axis end"
+ tooltip="Coordinates of point on positive direction of minor axis"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="start_point"
+ title="Start point"
+ tooltip="Arc start point coordinates"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="end_point"
+ title="End point"
+ tooltip="Arc end point coordinates"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <labelvalue id="ellipse_major_radius"
+ icon="icons/Sketch/radius_major.png"
+ label="Major radius"
+ tooltip="Set major radius"
+ default="computed"
+ accept_expressions="0"
+ enable_value="enable_by_preferences">
+ </labelvalue>
+ <labelvalue id="ellipse_minor_radius"
+ icon="icons/Sketch/radius_minor.png"
+ label="Minor radius"
+ tooltip="Set minor radius"
+ default="computed"
+ accept_expressions="0"
+ enable_value="enable_by_preferences">
+ </labelvalue>
+ <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
+ </feature>
+ <!-- SketchMacroEllipticArc -->
+ <feature id="SketchMacroEllipticArc"
+ icon="icons/Sketch/elliptic_arc.png"
+ title="Elliptic arc"
+ tooltip="Create elliptic arc"
+ helpfile="ellipseFeature.html">
+ <sketch-2dpoint_selector id="center"
+ reference_attribute="center_ref"
+ title="Center point"
+ tooltip="Center point coordinates"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="major_axis_point"
+ reference_attribute="major_axis_point_ref"
+ title="Major axis point"
+ tooltip="Major axis point coordinates"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="start_point"
+ reference_attribute="start_point_ref"
+ title="Start point"
+ tooltip="Arc start point coordinates"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="end_point"
+ reference_attribute="end_point_ref"
+ title="End point"
+ tooltip="Arc end point coordinates"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <labelvalue id="major_radius"
+ icon="icons/Sketch/radius_major.png"
+ label="Major radius"
tooltip="Set major radius"
default="computed"
accept_expressions="0"
</labelvalue>
<labelvalue id="minor_radius"
icon="icons/Sketch/radius_minor.png"
- label="Minor radius:"
+ label="Minor radius"
tooltip="Set minor radius"
default="computed"
accept_expressions="0"
</feature>
</group>
+ <group id="Segmentation">
+ <!-- SketchSplit -->
+ <feature id="SketchSplit" title="Split"
+ tooltip="Cut selected segment arc or circle on existing coincident points"
+ icon="icons/Sketch/split.png"
+ helpfile="splitFeature.html">
+ <sketch_feature_point_selector
+ id="SelectedObject"
+ selection_attributes="SelectedObject SelectedPoint PreviewObject PreviewPoint"
+ label="Segment"
+ tooltip="Select segment for split"
+ shape_types="edge"
+ use_external="false">
+ <validator id="SketchPlugin_SplitValidator"/>
+ </sketch_feature_point_selector>
+ <validator id="PartSet_SplitSelection"/>
+ </feature>
+ <!-- SketchTrim -->
+ <feature id="SketchTrim" title="Trim"
+ tooltip="Trim selected segment arc or circle on intersection points nearest to the graphic selection"
+ icon="icons/Sketch/trim.png"
+ helpfile="trimFeature.html">
+ <sketch_feature_point_selector
+ id="SelectedObject"
+ selection_attributes="SelectedObject SelectedPoint PreviewObject PreviewPoint"
+ label="Segment"
+ tooltip="Select segment for trim"
+ shape_types="edge"
+ use_external="false">
+ <validator id="SketchPlugin_TrimValidator"/>
+ </sketch_feature_point_selector>
+ <validator id="PartSet_SplitSelection"/>
+ </feature>
+ </group>
+
<group id="Projection">
<!-- Projected feature -->
<feature
<validator id="SketchPlugin_ReplicationReference" parameters="ConstraintEntityC"/>
</sketch_shape_selector>
<sketch_multi_selector id="ConstraintMirrorList"
- label="Segments:"
+ label="Segments"
tooltip="Select list of objects to be mirrored"
shape_types="Edges"
use_external="true"
tooltip="Copy objects and move"
helpfile="translationFeature.html">
<sketch_multi_selector id="MultiTranslationList"
- label="Segments:"
+ label="Segments"
tooltip="Select list of objects to be translated"
shape_types="Edges"
use_external="true"
tooltip="Copy objects and rotate"
helpfile="rotationFeature.html">
<sketch_multi_selector id="MultiRotationList"
- label="Segments:"
+ label="Segments"
tooltip="Select list of objects to be rotated"
shape_types="Edges"
use_external="true"
icon="icons/Sketch/equal.png"
helpfile="equalFeature.html">
<sketch_shape_selector id="ConstraintEntityA"
- label="First object" tooltip="Select line, circle or arc" shape_types="edge">
+ label="First object" tooltip="Select edge" shape_types="edge">
<validator id="PartSet_DifferentObjects"/>
<validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
</sketch_shape_selector>
<sketch_shape_selector id="ConstraintEntityB"
- label="Second object" tooltip="Select line, circle or arc" shape_types="edge">
+ label="Second object" tooltip="Select edge" shape_types="edge">
<validator id="SketchPlugin_EqualAttr" parameters="ConstraintEntityA"/>
<validator id="PartSet_DifferentObjects"/>
<validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
