-<!--
-Copyright (C) 2014-2017 CEA/DEN, EDF R&D
-
-This library is free software; you can redistribute it and/or
-modify it under the terms of the GNU Lesser General Public
-License as published by the Free Software Foundation; either
-version 2.1 of the License, or (at your option) any later version.
-
-This library is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-Lesser General Public License for more details.
-
-You should have received a copy of the GNU Lesser General Public
-License along with this library; if not, write to the Free Software
-Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-See http:##www.salome-platform.org/ or
-email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
--->
-
<plugin>
<workbench id="Sketch">
<group id="Linear geometry">
id="Sketch"
nested="SketchPoint SketchIntersectionPoint SketchLine
SketchCircle SketchMacroCircle SketchArc SketchMacroArc
+ SketchEllipse SketchMacroEllipse SketchEllipticArc SketchMacroEllipticArc
+ SketchBSpline SketchMacroBSpline SketchMacroBSplinePeriodic SketchBSplinePeriodic
SketchRectangle
SketchProjection
+ SketchCurveFitting
SketchConstraintLength SketchConstraintRadius SketchConstraintDistance SketchConstraintDistanceHorizontal SketchConstraintDistanceVertical
SketchConstraintParallel SketchConstraintPerpendicular
SketchConstraintRigid SketchConstraintHorizontal SketchConstraintVertical
SketchConstraintEqual SketchConstraintTangent
SketchFillet SketchSplit SketchTrim
- SketchConstraintCoincidence
+ SketchConstraintCoincidence SketchConstraintCoincidenceInternal
SketchConstraintMirror SketchConstraintAngle
SketchMultiRotation SketchMultiTranslation
+ SketchOffset
SketchConstraintCollinear SketchConstraintMiddle"
when_nested="accept abort"
title="Sketch"
tooltip="Create sketch"
- icon="icons/Sketch/sketch.png">
- <sketch-start-label id="External" title="Select a plane on which to create a sketch" tooltip="Select a plane on which to create a sketch">
+ icon="icons/Sketch/sketch.png"
+ helpfile="SketchPlugin.html">
+ <sketch-start-label id="External" geometrical_selection="true" title="Select a plane on which to create a sketch" tooltip="Select a plane on which to create a sketch">
<validator id="GeomValidators_Face" parameters="plane"/>
</sketch-start-label>
- <label id="SolverDOF"/>
- <label id="SolverError" styleSheet="color : red; font : bold"/>
+ <undo_label id="SolverError" isHTML="true" />
<validator id="SketchPlugin_SolverErrorValidator"/>
</feature>
<!-- SketchPoint -->
- <feature id="SketchPoint" title="Point" tooltip="Create point" icon="icons/Sketch/point.png">
+ <feature id="SketchPoint" title="Point" tooltip="Create point" icon="icons/Sketch/point.png"
+ helpfile="pointFeature.html">
<sketch-2dpoint_selector id="PointCoordinates" accept_expressions="0" title="Point" tooltip="Point coordinates"
enable_value="enable_by_preferences"/>
- <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
+ <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0" change_visual_attributes="true"/>
</feature>
<!-- SketchLine -->
- <feature id="SketchLine" title="Line" tooltip="Create line" icon="icons/Sketch/line.png">
+ <feature id="SketchLine" title="Line" tooltip="Create line" icon="icons/Sketch/line.png"
+ helpfile="lineFeature.html">
<sketch-2dpoint_selector id="StartPoint" accept_expressions="0" title="Start point" tooltip="Start point coordinates"
enable_value="enable_by_preferences"/>
<sketch-2dpoint_selector id="EndPoint" accept_expressions="0" title="End point" tooltip="End point coordinates"
enable_value="enable_by_preferences"/>
- <labelvalue id="LineLength" accept_expressions="0" label="Length:" default="computed" icon="icons/Sketch/distance_value.png"
+ <labelvalue id="LineLength" accept_expressions="0" label="Length" default="computed" icon="icons/Sketch/distance_value.png"
tooltip="Line length" obligatory="0" enable_value="false"/>
- <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
+ <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0" change_visual_attributes="true"/>
<validator id="GeomValidators_Different" parameters="StartPoint,EndPoint"/>
</feature>
</group>
- <group id="Circular geometry">
+ <group id="Conical geometry">
<!-- SketchCircle is a hidden feature. It is created inside SketchMacroCircle. -->
<feature id="SketchCircle"
title="Circle"
enable_value="enable_by_preferences"/>
<labelvalue id="circle_radius"
icon="icons/Sketch/radius.png"
- label="Radius:"
+ label="Radius"
tooltip="Set radius"
default="computed"
accept_expressions="0"
enable_value="enable_by_preferences">
</labelvalue>
- <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
+ <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0" change_visual_attributes="true"/>
</feature>
<!-- SketchMacroCircle -->
<feature id="SketchMacroCircle"
icon="icons/Sketch/circle.png"
title="Circle"
- tooltip="Create circle">
+ tooltip="Create circle"
+ helpfile="circleFeature.html">
<toolbox id="circle_type" modified_in_edit="edit_circle_type">
<box id="circle_type_by_center_and_passed_points"
icon="icons/Sketch/circle_pt_rad_32x32.png"
</toolbox>
<labelvalue id="circle_radius"
icon="icons/Sketch/radius.png"
- label="Radius:"
+ label="Radius"
tooltip="Set radius"
default="computed"
accept_expressions="0"
obligatory="0"
enable_value="enable_by_preferences">
- <validator id="GeomValidators_Positive"/>
</labelvalue>
<boolvalue id="Auxiliary"
tooltip="Construction element"
label="Auxiliary"
default="false"
- obligatory="0"/>
+ obligatory="0"
+ change_visual_attributes="true"/>
</feature>
<!-- SketchArc -->
<validator id="GeomValidators_Different" parameters="center_point,start_point,end_point"/>
<labelvalue id="radius"
icon="icons/Sketch/radius.png"
- label="Radius:"
+ label="Radius"
tooltip="Set radius"
accept_expressions="0"
min="0"
</labelvalue>
<labelvalue id="angle"
icon="icons/Sketch/angle.png"
- label="Angle:"
+ label="Angle"
tooltip="Set angle"
default="0"
use_reset="false"
label="Auxiliary"
tooltip="Construction element"
default="false"
- obligatory="0"/>
+ obligatory="0"
+ change_visual_attributes="true"/>
</feature>
<!-- SketchMacroArc -->
id="SketchMacroArc"
title="Arc"
tooltip="Create arc"
- icon="icons/Sketch/arc.png">
+ icon="icons/Sketch/arc.png"
+ helpfile="arcFeature.html">
<toolbox id="arc_type" modified_in_edit="edit_arc_type">
<box id="by_center_and_points"
icon="icons/Sketch/arc_base_32x32.png"
<validator id="SketchPlugin_ArcEndPointValidator" parameters="end_point_ref"/>
</sketch-2dpoint_selector>
</box>
+ <box id="by_transversal_line"
+ icon="icons/Sketch/arc_perp_32x32.png"
+ title="Perpendicular to line">
+ <sketch_shape_selector id="transversal_point"
+ label="Point on the perpendicular line"
+ tooltip="Select point on line"
+ shape_types="vertex">
+ <validator id="SketchPlugin_ArcTransversalPoint"/>
+ </sketch_shape_selector>
+ <sketch-2dpoint_selector id="end_point_4"
+ reference_attribute="end_point_ref"
+ title="End point"
+ tooltip="End point"
+ accept_expressions="0"
+ enable_value="enable_by_preferences">
+ <validator id="SketchPlugin_ArcEndPointValidator" parameters="end_point_ref"/>
+ </sketch-2dpoint_selector>
+ </box>
</toolbox>
<labelvalue id="radius"
icon="icons/Sketch/radius.png"
- label="Radius:"
+ label="Radius"
tooltip="Set radius"
accept_expressions="0"
min="0"
</labelvalue>
<labelvalue id="angle"
icon="icons/Sketch/angle.png"
- label="Angle:"
+ label="Angle"
tooltip="Set angle"
default="0"
use_reset="false"
label="Auxiliary"
tooltip="Construction element"
default="false"
- obligatory="0"/>
+ obligatory="0"
+ change_visual_attributes="true"/>
</feature>
<!-- SketchFillet -->
<feature id="SketchFillet"
title="Fillet"
- tooltip="Create constraint defining fillet between two objects"
- icon="icons/Sketch/fillet.png">
+ tooltip="Create constraint defining fillet between two connected segments"
+ icon="icons/Sketch/fillet.png"
+ helpfile="filletFeature.html">
<sketch_shape_selector id="fillet_point"
label="Point"
tooltip="Select point for fillet (should be shared by two entities only)"
</sketch_shape_selector>
<!--<validator id="PartSet_FilletSelection"/>-->
</feature>
- <!-- SketchSplit -->
- <feature id="SketchSplit" title="Split"
- tooltip="Cut selected segment arc or circle on existing coincident points"
- icon="icons/Sketch/split.png">
- <sketch_feature_point_selector
- id="SelectedObject"
- selection_attributes="SelectedObject SelectedPoint PreviewObject PreviewPoint"
- label="Segment"
- tooltip="Select segment for split"
- shape_types="edge"
- use_external="false">
- <validator id="SketchPlugin_SplitValidator"/>
- </sketch_feature_point_selector>
- <validator id="PartSet_SplitSelection"/>
- </feature>
- <!-- SketchTrim -->
- <feature id="SketchTrim" title="Trim"
- tooltip="Trim selected segment arc or circle on intersection points nearest to the graphic selection"
- icon="icons/Sketch/trim.png">
- <sketch_feature_point_selector
- id="SelectedObject"
- selection_attributes="SelectedObject SelectedPoint PreviewObject PreviewPoint"
- label="Segment"
- tooltip="Select segment for trim"
- shape_types="edge"
- use_external="false">
- <validator id="SketchPlugin_TrimValidator"/>
- </sketch_feature_point_selector>
- <validator id="PartSet_SplitSelection"/>
- </feature>
- </group>
-<excluded>
- <group id="Elliptic geometry">
<!-- SketchEllipse is a hidden feature. It is created inside SketchMacroEllipse. -->
<feature id="SketchEllipse"
title="Ellipse"
tooltip="Center coordinates"
accept_expressions="0"
enable_value="enable_by_preferences"/>
- <sketch-2dpoint_selector id="ellipse_focus"
- title="Focus"
+ <sketch-2dpoint_selector id="ellipse_first_focus"
+ title="First focus"
tooltip="Focus coordinates"
accept_expressions="0"
enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="ellipse_second_focus"
+ title="Second focus"
+ tooltip="Focus coordinates"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="ellipse_major_axis_start_point"
+ title="Major axis start"
+ tooltip="Coordinates of point on negative direction of major axis"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="ellipse_major_axis_end_point"
+ title="Major axis end"
+ tooltip="Coordinates of point on positive direction of major axis"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="ellipse_minor_axis_start_point"
+ title="Minor axis start"
+ tooltip="Coordinates of point on negative direction of minor axis"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="ellipse_minor_axis_end_point"
+ title="Minor axis end"
+ tooltip="Coordinates of point on positive direction of minor axis"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
<labelvalue id="ellipse_major_radius"
- icon="icons/Sketch/radius.png"
- label="Major radius:"
+ icon="icons/Sketch/radius_major.png"
+ label="Major radius"
tooltip="Set major radius"
default="computed"
accept_expressions="0"
enable_value="enable_by_preferences">
</labelvalue>
<labelvalue id="ellipse_minor_radius"
- icon="icons/Sketch/radius.png"
- label="Minor radius:"
+ icon="icons/Sketch/radius_minor.png"
+ label="Minor radius"
tooltip="Set minor radius"
default="computed"
accept_expressions="0"
enable_value="enable_by_preferences">
</labelvalue>
- <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
+ <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0" change_visual_attributes="true"/>
</feature>
<!-- SketchMacroEllipse -->
<feature id="SketchMacroEllipse"
icon="icons/Sketch/ellipse.png"
title="Ellipse"
- tooltip="Create ellipse">
- <sketch-2dpoint_selector id="center_point"
- reference_attribute="center_point_ref"
+ tooltip="Create ellipse"
+ helpfile="ellipseFeature.html">
+ <toolbox id="ellipse_type" modified_in_edit="edit_ellipse_type">
+ <box id="by_center_axis_point"
+ icon="icons/Sketch/ellipse_cent_rad_32x32.png"
+ title="Center, major semi-axis and passing point">
+ <sketch-2dpoint_selector id="first_point"
+ reference_attribute="first_point_ref"
+ title="Center point"
+ tooltip="Center point coordinates"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="second_point"
+ reference_attribute="second_point_ref"
+ title="Major axis point"
+ tooltip="Major axis point coordinates"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="passed_point"
+ reference_attribute="passed_point_ref"
+ title="Passed point"
+ tooltip="Passed point coordinates"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <validator id="GeomValidators_Different" parameters="first_point,second_point,passed_point"/>
+ <validator id="SketchPlugin_DifferentPointReference" parameters="first_point_ref,second_point_ref"/>
+ </box>
+ <box id="by_major_axis_and_point"
+ icon="icons/Sketch/ellipse_axes_32x32.png"
+ title="Major axis and passing point">
+ <sketch-2dpoint_selector id="first_point_1"
+ reference_attribute="first_point_ref_1"
+ title="Major axis start point"
+ tooltip="Major axis start point coordinates"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="second_point_1"
+ reference_attribute="second_point_ref_1"
+ title="Major axis end point"
+ tooltip="Major axis end point coordinates"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="passed_point_1"
+ reference_attribute="passed_point_ref_1"
+ title="Passed point"
+ tooltip="Passed point coordinates"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <validator id="GeomValidators_Different" parameters="first_point_1,second_point_1,passed_point_1"/>
+ <validator id="SketchPlugin_DifferentPointReference" parameters="first_point_ref_1,second_point_ref_1"/>
+ </box>
+ </toolbox>
+ <labelvalue id="major_radius"
+ icon="icons/Sketch/radius_major.png"
+ label="Major radius"
+ tooltip="Set major radius"
+ default="computed"
+ accept_expressions="0"
+ obligatory="0"
+ enable_value="enable_by_preferences">
+ </labelvalue>
+ <labelvalue id="minor_radius"
+ icon="icons/Sketch/radius_minor.png"
+ label="Minor radius"
+ tooltip="Set minor radius"
+ default="computed"
+ accept_expressions="0"
+ obligatory="0"
+ enable_value="enable_by_preferences">
+ </labelvalue>
+ <boolvalue id="Auxiliary"
+ tooltip="Construction element"
+ label="Auxiliary"
+ default="false"
+ obligatory="0"
+ change_visual_attributes="true"/>
+ </feature>
+
+ <!-- SketchEllipticArc is a hidden feature. It is created inside SketchMacroEllipse. -->
+ <feature id="SketchEllipticArc"
+ title="Elliptic arc"
+ tooltip="Create elliptic arc"
+ icon="icons/Sketch/elliptic_arc.png"
+ internal="1">
+ <sketch-2dpoint_selector id="ellipse_center"
+ title="Center"
+ tooltip="Center coordinates"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="ellipse_first_focus"
+ title="First focus"
+ tooltip="Focus coordinates"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="ellipse_second_focus"
+ title="Second focus"
+ tooltip="Focus coordinates"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="ellipse_major_axis_start_point"
+ title="Major axis start"
+ tooltip="Coordinates of point on negative direction of major axis"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="ellipse_major_axis_end_point"
+ title="Major axis end"
+ tooltip="Coordinates of point on positive direction of major axis"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="ellipse_minor_axis_start_point"
+ title="Minor axis start"
+ tooltip="Coordinates of point on negative direction of minor axis"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="ellipse_minor_axis_end_point"
+ title="Minor axis end"
+ tooltip="Coordinates of point on positive direction of minor axis"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="start_point"
+ title="Start point"
+ tooltip="Arc start point coordinates"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="end_point"
+ title="End point"
+ tooltip="Arc end point coordinates"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <labelvalue id="ellipse_major_radius"
+ icon="icons/Sketch/radius_major.png"
+ label="Major radius"
+ tooltip="Set major radius"
+ default="computed"
+ accept_expressions="0"
+ enable_value="enable_by_preferences">
+ </labelvalue>
+ <labelvalue id="ellipse_minor_radius"
+ icon="icons/Sketch/radius_minor.png"
+ label="Minor radius"
+ tooltip="Set minor radius"
+ default="computed"
+ accept_expressions="0"
+ enable_value="enable_by_preferences">
+ </labelvalue>
+ <boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0" change_visual_attributes="true"/>
+ </feature>
+ <!-- SketchMacroEllipticArc -->
+ <feature id="SketchMacroEllipticArc"
+ icon="icons/Sketch/elliptic_arc.png"
+ title="Elliptic arc"
+ tooltip="Create elliptic arc"
+ helpfile="ellipseFeature.html">
+ <sketch-2dpoint_selector id="center"
+ reference_attribute="center_ref"
title="Center point"
tooltip="Center point coordinates"
accept_expressions="0"
tooltip="Major axis point coordinates"
accept_expressions="0"
enable_value="enable_by_preferences"/>
- <sketch-2dpoint_selector id="passed_point"
- reference_attribute="passed_point_ref"
- title="Passed point"
- tooltip="Passed point coordinates"
+ <sketch-2dpoint_selector id="start_point"
+ reference_attribute="start_point_ref"
+ title="Start point"
+ tooltip="Arc start point coordinates"
accept_expressions="0"
- enable_value="enable_by_preferences">
-<!-- <validator id="SketchPlugin_CirclePassedPointValidator"/> -->
- </sketch-2dpoint_selector>
-<!-- <validator id="GeomValidators_Different" parameters="center_point_ref,passed_point_ref"/> -->
- <labelvalue id="ellipse_major_radius"
- icon="icons/Sketch/radius.png"
- label="Major radius:"
+ enable_value="enable_by_preferences"/>
+ <sketch-2dpoint_selector id="end_point"
+ reference_attribute="end_point_ref"
+ title="End point"
+ tooltip="Arc end point coordinates"
+ accept_expressions="0"
+ enable_value="enable_by_preferences"/>
+ <labelvalue id="major_radius"
+ icon="icons/Sketch/radius_major.png"
+ label="Major radius"
tooltip="Set major radius"
default="computed"
accept_expressions="0"
obligatory="0"
enable_value="enable_by_preferences">
- <validator id="GeomValidators_Positive"/>
</labelvalue>
- <labelvalue id="ellipse_minor_radius"
- icon="icons/Sketch/radius.png"
- label="Minor radius:"
+ <labelvalue id="minor_radius"
+ icon="icons/Sketch/radius_minor.png"
+ label="Minor radius"
tooltip="Set minor radius"
default="computed"
accept_expressions="0"
obligatory="0"
enable_value="enable_by_preferences">
- <validator id="GeomValidators_Positive"/>
</labelvalue>
<boolvalue id="Auxiliary"
tooltip="Construction element"
label="Auxiliary"
default="false"
- obligatory="0"/>
+ obligatory="0"
+ change_visual_attributes="true"/>
+ <validator id="GeomValidators_Different" parameters="center,major_axis_point"/>
+ <validator id="SketchPlugin_DifferentPointReference" parameters="center_ref,major_axis_point_ref"/>
+ <validator id="GeomValidators_Different" parameters="start_point,end_point"/>
+ <validator id="SketchPlugin_DifferentPointReference" parameters="start_point_ref,end_point_ref"/>
</feature>
</group>
-</excluded>
- <group id="Projection">
- <!-- Intersection Point -->
- <!-- feature
- id="SketchIntersectionPoint"
- title="Intersection Point"
- tooltip="Create intersection point"
- icon="icons/Sketch/intersection_point.png">
- <sketch_shape_selector
- id="ExternalLine"
- label="Edge"
- tooltip="Select external line."
- shape_types="edge"
- use_external="false"
- use_sketch_plane="false">
- <validator id="GeomValidators_ShapeType" parameters="line"/>
- <validator id="SketchPlugin_IntersectionValidator"/>
- </sketch_shape_selector>
- </feature -->
+ <group id="Parametric curves">
+ <!-- SketchBSpline is a hidden feature. It is created inside SketchMacroBSpline. -->
+ <feature id="SketchBSpline"
+ title="B-spline"
+ tooltip="Create B-spline curve"
+ icon="icons/Sketch/bspline.png"
+ helpfile="bsplineFeature.html"
+ internal="1">
+ <bspline-panel id="poles"
+ weights="weights"
+ title="Poles and weights"
+ tooltip="B-spline poles and weights"
+ enable_value="enable_by_preferences">
+ <validator id="SketchPlugin_BSplineValidator"/>
+ </bspline-panel>
+ <boolvalue id="Auxiliary"
+ label="Auxiliary"
+ default="false"
+ tooltip="Construction element"
+ obligatory="0"
+ change_visual_attributes="true"/>
+ </feature>
+
+ <!-- SketchBSplinePeriodic is a hidden feature. It is created inside SketchMacroBSplinePeriodic. -->
+ <feature id="SketchBSplinePeriodic"
+ title="Periodic B-spline"
+ tooltip="Create periodic B-spline curve"
+ icon="icons/Sketch/bspline_p.png"
+ helpfile="bsplineFeature.html"
+ internal="1">
+ <bspline-panel id="poles"
+ weights="weights"
+ title="Poles and weights"
+ tooltip="B-spline poles and weights"
+ enable_value="enable_by_preferences">
+ <validator id="SketchPlugin_BSplineValidator"/>
+ </bspline-panel>
+ <boolvalue id="Auxiliary"
+ label="Auxiliary"
+ default="false"
+ tooltip="Construction element"
+ obligatory="0"
+ change_visual_attributes="true"/>
+ </feature>
+
+ <!-- SketchMacroBSpline -->
+ <feature id="SketchMacroBSpline"
+ title="B-spline"
+ tooltip="Create B-spline curve"
+ icon="icons/Sketch/bspline.png"
+ helpfile="bsplineFeature.html">
+ <sketch-bspline_selector id="poles"
+ weights="weights"
+ reference_attribute="poles_ref"
+ title="Poles"
+ tooltip="B-spline poles"
+ enable_value="enable_by_preferences">
+ <validator id="SketchPlugin_BSplineValidator"/>
+ </sketch-bspline_selector>
+ <boolvalue id="need_control_poly"
+ label="Create control polygon"
+ default="true"
+ tooltip="Specify if the control polygon should be created"/>
+ <boolvalue id="Auxiliary"
+ label="Auxiliary"
+ default="false"
+ tooltip="Construction element"
+ obligatory="0"
+ change_visual_attributes="true"/>
+ </feature>
+
+ <!-- SketchMacroBSplinePeriodic -->
+ <feature id="SketchMacroBSplinePeriodic"
+ title="Periodic B-spline"
+ tooltip="Create periodic B-spline curve"
+ icon="icons/Sketch/bspline_p.png"
+ helpfile="bsplineFeature.html">
+ <sketch-bspline_selector id="poles"
+ weights="weights"
+ reference_attribute="poles_ref"
+ title="Poles"
+ tooltip="B-spline poles"
+ enable_value="enable_by_preferences">
+ <validator id="SketchPlugin_BSplineValidator"/>
+ </sketch-bspline_selector>
+ <boolvalue id="need_control_poly"
+ label="Create control polygon"
+ default="true"
+ tooltip="Specify if the control polygon should be created"/>
+ <boolvalue id="Auxiliary"
+ label="Auxiliary"
+ default="false"
+ tooltip="Construction element"
+ obligatory="0"
+ change_visual_attributes="true"/>
+ </feature>
+
+ <!-- Curve fitting -->
+ <feature id="SketchCurveFitting"
+ title="Curve fitting"
+ tooltip="Create curve passing through the points"
+ icon="icons/Sketch/curvefitting.png"
+ helpfile="curveFittingFeature.html">
+ <sketch_multi_selector id="points"
+ label="Points"
+ tooltip="Select points for curve fitting"
+ shape_types="Vertices"
+ use_external="true"
+ greed="true">
+ </sketch_multi_selector>
+ <switch id="type">
+ <case id="interpolation_type" title="Interpolation"/>
+ <case id="approximation_type" title="Approximation">
+ <doublevalue id="precision"
+ label="Precision"
+ tooltip="Maximal distance from selected points to the curve"
+ default="0.001"
+ min="1.e-7"
+ use_reset="false">
+ <validator id="GeomValidators_Positive" parameters="0"/>
+ </doublevalue>
+ </case>
+ </switch>
+ <boolvalue id="need_control_poly"
+ label="Create control polygon"
+ default="true"
+ tooltip="Specify if the control polygon should be created"/>
+ <optionalbox id="periodic"
+ title="Periodic"
+ tooltip="Make curve periodic"
+ default="false"
+ has_frame="false"
+ enable_on_check="false"
+ show_title="true">
+ <boolvalue id="closed"
+ label="Closed"
+ default="false"
+ tooltip="Make curve closed, but not periodic"
+ obligatory="1"/>
+ </optionalbox>
+ <boolvalue id="Auxiliary"
+ label="Auxiliary"
+ default="false"
+ tooltip="Construction element"
+ obligatory="0"
+ change_visual_attributes="true"/>
+ <validator id="SketchPlugin_CurveFittingValidator"/>
+ <action id="reorder_points"
+ label="Reorder points"
+ tooltip="Sort selected points to minimize the distance heighbors"/>
+ </feature>
+ </group>
+
+ <group id="Segmentation">
+ <!-- SketchSplit -->
+ <feature id="SketchSplit" title="Split"
+ tooltip="Cut selected segment arc or circle on existing coincident points"
+ icon="icons/Sketch/split.png"
+ helpfile="splitFeature.html">
+ <sketch_feature_point_selector
+ id="SelectedObject"
+ selection_attributes="SelectedObject SelectedPoint PreviewObject PreviewPoint"
+ label="Segment"
+ tooltip="Select segment for split"
+ shape_types="edge"
+ use_external="false">
+ <validator id="SketchPlugin_SplitValidator"/>
+ </sketch_feature_point_selector>
+ <validator id="PartSet_SplitSelection"/>
+ </feature>
+ <!-- SketchTrim -->
+ <feature id="SketchTrim" title="Trim"
+ tooltip="Trim selected segment arc or circle on intersection points nearest to the graphic selection"
+ icon="icons/Sketch/trim.png"
+ helpfile="trimFeature.html">
+ <sketch_feature_point_selector
+ id="SelectedObject"
+ selection_attributes="SelectedObject SelectedPoint PreviewObject PreviewPoint"
+ label="Segment"
+ tooltip="Select segment for trim"
+ shape_types="edge"
+ use_external="false">
+ <validator id="SketchPlugin_TrimValidator"/>
+ </sketch_feature_point_selector>
+ <validator id="PartSet_SplitSelection"/>
+ </feature>
+ </group>
+ <group id="Projection">
<!-- Projected feature -->
<feature
id="SketchProjection"
title="Projection"
tooltip="Project feature onto sketch plane"
- icon="icons/Sketch/projection.png">
+ icon="icons/Sketch/projection.png"
+ helpfile="projectionFeature.html">
<sketch_shape_selector
id="ExternalFeature"
- label="Edge"
- tooltip="Select external edge."
+ label="Object"
+ tooltip="Select external edge or vertex."
shape_types="edge vertex"
use_external="true"
can_create_external="false"
use_sketch_plane="false">
<validator id="SketchPlugin_ProjectionValidator"/>
</sketch_shape_selector>
- <boolvalue id="IncludeToResult" label="Include into the sketch result" default="true" tooltip="Include projected feature into the sketch result"/>
+ <radiobox id="keep_reference"
+ align_subs="vertical">
+ <radio id="true"
+ title="Keep reference to the original shape"
+ tooltip="The reference to the original curve is stored. So it can be changed later.">
+ <boolvalue id="IncludeToResult"
+ label="Include into the sketch result"
+ default="true"
+ tooltip="Include projected feature into the sketch result"
+ change_visual_attributes="true"/>
+ </radio>
+ <radio id="false"
+ title="Break connection with the original shape"
+ tooltip="A sketch entity will be created without connection to the selected shape.">
+ <boolvalue id="make_fixed"
+ label="Make projected curve fixed"
+ default="true"
+ tooltip="Assign the Fixed constraint to the result of projection"/>
+ </radio>
+ </radiobox>
<validator id="PartSet_ProjectionSelection"/>
</feature>
+
+ <!-- Intersection Point -->
+ <feature
+ id="SketchIntersectionPoint"
+ title="Intersection"
+ tooltip="Intersect edge with sketch plane"
+ icon="icons/Sketch/intersection.png"
+ helpfile="intersectionFeature.html">
+ <sketch_shape_selector
+ id="ExternalFeature"
+ label="Object"
+ tooltip="Select external edge."
+ shape_types="edge"
+ use_external="true"
+ can_create_external="false"
+ use_sketch_plane="false">
+ <validator id="SketchPlugin_IntersectionValidator"/>
+ </sketch_shape_selector>
+ <boolvalue id="IncludeToResult" label="Include into the sketch result" default="true" tooltip="Include projected feature into the sketch result"
+ change_visual_attributes="true"/>
+ <validator id="PartSet_IntersectionSelection"/>
+ </feature>
</group>
<group id="Replication">
<feature
id="SketchConstraintMirror"
title="Mirror copy" icon="icons/Sketch/mirror.png"
- tooltip="Create constraint, mirroring group of objects">
+ tooltip="Create constraint, mirroring group of objects"
+ helpfile="mirrorFeature.html">
<sketch_shape_selector id="ConstraintEntityA"
label="Mirror line" tooltip="Select mirror line" shape_types="edge">
<validator id="GeomValidators_ShapeType" parameters="line"/>
- <validator id="SketchPlugin_ReplicationReference" parameters="ConstraintEntityC"/>
+ <validator id="SketchPlugin_ReplicationReference" parameters="ConstraintEntityC,ConstraintEntityB"/>
</sketch_shape_selector>
<sketch_multi_selector id="ConstraintMirrorList"
- label="Segments:"
+ label="Segments"
tooltip="Select list of objects to be mirrored"
- type_choice="Edges"
+ shape_types="Edges"
use_external="true"
greed ="true">
<validator id="SketchPlugin_MirrorAttr" />
<feature
id="SketchMultiTranslation"
title="Linear copy" icon="icons/Sketch/translate.png"
- tooltip="Copy objects and move">
+ tooltip="Copy objects and move"
+ helpfile="translationFeature.html">
<sketch_multi_selector id="MultiTranslationList"
- label="Segments:"
+ label="Segments"
tooltip="Select list of objects to be translated"
- type_choice="Edges"
+ shape_types="Edges"
use_external="true"
greed ="true">
<validator id="SketchPlugin_CopyValidator" />
shape_types="vertex">
<validator id="PartSet_DifferentObjects"/>
<validator id="GeomValidators_ShapeType" parameters="vertex"/>
- <validator id="SketchPlugin_ReplicationReference" parameters="ConstraintEntityB"/>
+ <validator id="SketchPlugin_ReplicationReference" parameters="ConstraintEntityB,ConstraintEntityA"/>
</sketch_shape_selector>
<sketch_shape_selector
id="MultiTranslationEndPoint"
shape_types="vertex">
<validator id="PartSet_DifferentObjects"/>
<validator id="GeomValidators_ShapeType" parameters="vertex"/>
- <validator id="SketchPlugin_ReplicationReference" parameters="ConstraintEntityB"/>
+ <validator id="SketchPlugin_ReplicationReference" parameters="ConstraintEntityB,ConstraintEntityA"/>
</sketch_shape_selector>
</groupbox>
</box>
shape_types="vertex">
<validator id="PartSet_DifferentObjects"/>
<validator id="GeomValidators_ShapeType" parameters="vertex"/>
- <validator id="SketchPlugin_ReplicationReference" parameters="ConstraintEntityB"/>
+ <validator id="SketchPlugin_ReplicationReference" parameters="ConstraintEntityB,ConstraintEntityA"/>
</sketch_shape_selector>
<sketch_shape_selector
id="MultiTranslationEndPoint"
shape_types="vertex">
<validator id="PartSet_DifferentObjects"/>
<validator id="GeomValidators_ShapeType" parameters="vertex"/>
- <validator id="SketchPlugin_ReplicationReference" parameters="ConstraintEntityB"/>
+ <validator id="SketchPlugin_ReplicationReference" parameters="ConstraintEntityB,ConstraintEntityA"/>
</sketch_shape_selector>
</groupbox>
</box>
<feature
id="SketchMultiRotation"
title="Angular copy" icon="icons/Sketch/rotate.png"
- tooltip="Copy objects and rotate">
+ tooltip="Copy objects and rotate"
+ helpfile="rotationFeature.html">
<sketch_multi_selector id="MultiRotationList"
- label="Segments:"
+ label="Segments"
tooltip="Select list of objects to be rotated"
- type_choice="Edges"
+ shape_types="Edges"
use_external="true"
greed ="true">
<validator id="SketchPlugin_CopyValidator" />
tooltip="Center of rotation"
shape_types="vertex">
<validator id="GeomValidators_ShapeType" parameters="vertex"/>
- <validator id="SketchPlugin_ReplicationReference" parameters="ConstraintEntityB"/>
+ <validator id="SketchPlugin_ReplicationReference" parameters="ConstraintEntityB,ConstraintEntityA"/>
</sketch_shape_selector>
<toolbox id="AngleType">
- <box id="SingleAngle" title="Single angle" icon="icons/Sketch/angle_up_32x32.png">
+ <box id="FullAngle" title="Full angle" icon="icons/Sketch/angle_up_full_32x32.png">
<doublevalue id="MultiRotationAngle"
label="Angle"
icon="icons/Sketch/angle.png"
tooltip="Rotation angle"
- default="90" use_reset="false"/>
+ default="360" min="0" max="360"
+ use_reset="false">
+ <validator id="SketchPlugin_MultiRotationAngleValidator" />
+ </doublevalue>
+ <boolvalue id="MultiRotationReversed"
+ label="Reversed"
+ tooltip="Reverse angular copy"
+ default="false"
+ obligatory="0"/>
</box>
- <box id="FullAngle" title="Full angle" icon="icons/Sketch/angle_up_full_32x32.png">
+ <box id="SingleAngle" title="Single angle" icon="icons/Sketch/angle_up_32x32.png">
<doublevalue id="MultiRotationAngle"
label="Angle"
icon="icons/Sketch/angle.png"
tooltip="Rotation angle"
- default="90" use_reset="false"/>
+ default="90" min="0" max="360"
+ use_reset="false">
+ <validator id="SketchPlugin_MultiRotationAngleValidator" />
+ </doublevalue>
+ <boolvalue id="MultiRotationReversed"
+ label="Reversed"
+ tooltip="Reverse angular copy"
+ default="false"
+ obligatory="0"/>
</box>
</toolbox>
<integervalue id="MultiRotationObjects"
label="Total number of objects"
tooltip="Total number of objects"
- default="2" min="2" use_reset="false">
+ default="4" min="2" use_reset="false">
<validator id="GeomValidators_Positive" parameters="1"/>
</integervalue>
<validator id="PartSet_MultyTranslationSelection" />
</feature>
+
+ <!-- Offset curve -->
+ <feature id="SketchOffset"
+ title="Offset"
+ tooltip="Offset a curve to a distance"
+ icon="icons/Sketch/offset.png"
+ helpfile="offsetFeature.html">
+ <toolbox id="offset_joint">
+ <box id="KeepDistance"
+ icon="icons/Sketch/offset_keep_distance_32x32.png"
+ title="Keep distance"/>
+ <box id="Arcs"
+ icon="icons/Sketch/offset_arcs_32x32.png"
+ title="Arcs"/>
+ <box id="Lines"
+ icon="icons/Sketch/offset_lines_32x32.png"
+ title="Lines"/>
+ </toolbox>
+ <sketch_multi_selector id="segments"
+ label="Edges"
+ tooltip="Select edges to offset"
+ shape_types="Edges"
+ use_external="true"
+ greed="true">
+ <validator id="SketchPlugin_CopyValidator" />
+ </sketch_multi_selector>
+ <doublevalue id="offset_value"
+ label="Offset value"
+ tooltip="Offset value"
+ default="1" min="0.000001"
+ use_reset="false">
+ <validator id="GeomValidators_Positive" parameters="1e-07"/>
+ </doublevalue>
+ <boolvalue id="reversed"
+ label="Reversed"
+ tooltip="Reverse the offset"
+ default="false"
+ obligatory="0"/>
+ <boolvalue id="approx"
+ label="Approx by segments and arcs"
+ tooltip="Approx by segments and arcs"
+ default="false"
+ obligatory="0"/>
+ <action id="add_wire"
+ label="Select wire"
+ tooltip="Add the list of segments composing a wire with the selected items through the coincidence by boundary points"/>
+ </feature>
</group>
<group id="Dimensional constraints">
- <!-- SketchConstraintDistance -->
+ <!-- SketchConstraintDistance -->
<feature
id="SketchConstraintDistance"
title="Distance"
tooltip="Set fixed distance from a point to an object"
- icon="icons/Sketch/distance.png">
+ icon="icons/Sketch/distance.png"
+ helpfile="distanceFeature.html">
<label title="Select objects for distance definition. Following objects can be accepted: point, line or arc end point, center of circle or arc."/>
<sketch_shape_selector
id="ConstraintEntityA"
<validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
<validator id="PartSet_DifferentObjects"/>
<validator id="GeomValidators_ShapeType" parameters="vertex,line"/>
- <validator id="PartSet_DifferentPoints" parameters="ConstraintEntityB"/>
</sketch_shape_selector>
<sketch_shape_selector
id="ConstraintEntityB"
<validator id="SketchPlugin_DistanceAttr" parameters="ConstraintEntityA"/>
<validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
<validator id="GeomValidators_ShapeType" parameters="vertex,line"/>
- <validator id="PartSet_DifferentPoints" parameters="ConstraintEntityA"/>
</sketch_shape_selector>
<sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
<doublevalue_editor label="Value" tooltip="Distance" id="ConstraintValue" default="computed" min="0">
- <validator id="GeomValidators_Positive"/>
+ <validator id="GeomValidators_Positive" parameters="-1.e-10"/>
</doublevalue_editor>
<module_choice id="LocationType"
id="SketchConstraintDistanceHorizontal"
title="Horizontal Distance"
tooltip="Set horizontal distance between two points"
- icon="icons/Sketch/distance_h.png">
+ icon="icons/Sketch/distance_h.png"
+ helpfile="horizontalDistFeature.html">
<label title="Select points for distance definition."/>
<sketch_shape_selector
id="ConstraintEntityA"
<sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
<doublevalue_editor label="Value" tooltip="Distance" id="DistanceValue" default="computed" min="0">
- <validator id="GeomValidators_Positive"/>
+ <validator id="GeomValidators_Positive" parameters="-1.e-10"/>
</doublevalue_editor>
<module_choice id="LocationType"
id="SketchConstraintDistanceVertical"
title="Vertical Distance"
tooltip="Set vertical distance between two points"
- icon="icons/Sketch/distance_v.png">
+ icon="icons/Sketch/distance_v.png"
+ helpfile="verticalDistFeature.html">
<label title="Select points for distance definition."/>
<sketch_shape_selector
id="ConstraintEntityA"
<sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
<doublevalue_editor label="Value" tooltip="Distance" id="DistanceValue" default="computed" min="0">
- <validator id="GeomValidators_Positive"/>
+ <validator id="GeomValidators_Positive" parameters="-1.e-10"/>
</doublevalue_editor>
<module_choice id="LocationType"
</feature>
<!-- SketchConstraintLength -->
- <feature id="SketchConstraintLength" title="Length" tooltip="Set fixed length of a line segment" icon="icons/Sketch/length.png">
+ <feature id="SketchConstraintLength" title="Length" tooltip="Set fixed length of a line segment" icon="icons/Sketch/length.png"
+ helpfile="lengthFeature.html">
<label title="Select a line on which to calculate length" tooltip="Select a line on which to calculate length"/>
<shape_selector id="ConstraintEntityA" label="Line" tooltip="Select a line" shape_types="edge" >
<validator id="GeomValidators_ShapeType" parameters="line"/>
</feature>
<!-- SketchConstraintAngle -->
- <feature id="SketchConstraintAngle" title="Angle" tooltip="Set fixed angle between two line segments" icon="icons/Sketch/angle_constr.png">
- <sketch_shape_selector id="ConstraintEntityA" label="Line 1" tooltip="Select a line" shape_types="edge" >
+ <feature id="SketchConstraintAngle" title="Angle" tooltip="Set fixed angle between two line segments" icon="icons/Sketch/angle_constr.png"
+ helpfile="angleFeature.html">
+ <sketch_feature_point_selector
+ id="ConstraintEntityA"
+ selection_attributes="ConstraintEntityA SelectedPointA"
+ label="Line 1"
+ tooltip="Select a line"
+ shape_types="edge"
+ use_external="true">
<validator id="GeomValidators_ShapeType" parameters="line"/>
<validator id="PartSet_DifferentObjects"/>
<validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
- </sketch_shape_selector>
- <sketch_shape_selector id="ConstraintEntityB" label="Line 2" tooltip="Select a line" shape_types="edge" >
+ </sketch_feature_point_selector>
+ <sketch_feature_point_selector
+ id="ConstraintEntityB"
+ selection_attributes="ConstraintEntityB SelectedPointB"
+ label="Line 2"
+ tooltip="Select a line"
+ shape_types="edge"
+ use_external="true">
<validator id="GeomValidators_ShapeType" parameters="line"/>
<validator id="PartSet_DifferentObjects"/>
<validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
- </sketch_shape_selector>
+ </sketch_feature_point_selector>
<sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
<doublevalue_editor label="Value" tooltip="Angle" id="AngleValue" default="computed" min="0" max="360" />
<validator id="PartSet_AngleSelection"/>
buttons_dir="horizontal"
label="Angle type"
tooltip="Type of angle"
- string_list="Direct Complementary Additional"
+ string_list="Direct Supplementary Additional"
icons_list="icons/Sketch/angle_direct.png icons/Sketch/angle_complementary.png icons/Sketch/angle_backward.png"
default="0"
/>
</feature>
<!-- SketchConstraintRadius -->
- <feature id="SketchConstraintRadius" title="Radius" tooltip="Set fixed radius of a circle or an arc" icon="icons/Sketch/radius_constr.png">
+ <feature id="SketchConstraintRadius" title="Radius" tooltip="Set fixed radius of a circle or an arc" icon="icons/Sketch/radius_constr.png"
+ helpfile="radiusFeature.html">
<label title="Select a circle or an arc on which to calculate radius" tooltip="Select a circle or an arc on which to calculate radius"/>
<shape_selector id="ConstraintEntityA" label="Circle or Arc" tooltip="Select a circle or an arc"
shape_types="edge">
<group id="Geometrical constraints">
<!-- SketchConstraintHorizontal -->
- <feature id="SketchConstraintHorizontal" title="Horizontal" tooltip="Create constraint defining horizontal line" icon="icons/Sketch/horisontal.png">
+ <feature id="SketchConstraintHorizontal" title="Horizontal" tooltip="Create constraint defining horizontal line" icon="icons/Sketch/horisontal.png"
+ helpfile="horizontalFeature.html">
<sketch_shape_selector id="ConstraintEntityA"
label="Line" tooltip="Select a line" shape_types="edge" use_external="false">
<validator id="GeomValidators_ShapeType" parameters="line"/>
</feature>
<!-- SketchConstraintVertical -->
- <feature id="SketchConstraintVertical" title="Vertical" tooltip="Create constraint defining vertical line" icon="icons/Sketch/vertical.png">
+ <feature id="SketchConstraintVertical" title="Vertical" tooltip="Create constraint defining vertical line" icon="icons/Sketch/vertical.png"
+ helpfile="verticalFeature.html">
<sketch_shape_selector id="ConstraintEntityA"
label="Line" tooltip="Select a line" shape_types="edge" use_external="false">
<validator id="GeomValidators_ShapeType" parameters="line"/>
</feature>
<!-- SketchConstraintRigid -->
- <feature id="SketchConstraintRigid" title="Fixed" tooltip="Fix an object" icon="icons/Sketch/fixed.png">
+ <feature id="SketchConstraintRigid" title="Fixed" tooltip="Fix an object" icon="icons/Sketch/fixed.png"
+ helpfile="rigidFeature.html">
<sketch_shape_selector id="ConstraintEntityA" label="Object"
- tooltip="Select point, line end point, line, center of circle or arc."
+ tooltip="Select point, curve or its boundary point."
shape_types="edge vertex">
- <validator id="GeomValidators_ShapeType" parameters="vertex,line,circle"/>
+ <validator id="GeomValidators_ShapeType" parameters="vertex,edge"/>
<validator id="SketchPlugin_NotFixed"/>
</sketch_shape_selector>
<validator id="PartSet_RigidSelection"/>
<!-- SketchConstraintParallel -->
<feature id="SketchConstraintParallel" title="Parallel" tooltip="Create constraint defining two parallel lines"
- icon="icons/Sketch/parallel.png">
+ icon="icons/Sketch/parallel.png" helpfile="parallelFeature.html">
<sketch_shape_selector id="ConstraintEntityA"
label="First line" tooltip="Select a line" shape_types="edge">
<validator id="GeomValidators_ShapeType" parameters="line"/>
<validator id="PartSet_ParallelSelection"/>
</feature>
- <!-- SketchConstraintPerpendicular -->
+ <!-- SketchConstraintPerpendicular -->
<feature id="SketchConstraintPerpendicular" title="Perpendicular"
- tooltip="Create constraint defining two perpendicular lines"
- icon="icons/Sketch/perpendicular.png">
+ tooltip="Create constraint defining two orthogonal objects"
+ icon="icons/Sketch/perpendicular.png"
+ helpfile="perpendicularFeature.html">
<sketch_shape_selector id="ConstraintEntityA"
- label="First line" tooltip="Select a line"
+ label="First object" tooltip="Select line or arc"
shape_types="edge">
<validator id="PartSet_DifferentObjects"/>
<validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
- <validator id="GeomValidators_ShapeType" parameters="line"/>
+ <validator id="SketchPlugin_PerpendicularAttr" parameters="ConstraintEntityB"/>
+ <validator id="GeomValidators_ShapeType" parameters="edge"/>
</sketch_shape_selector>
<sketch_shape_selector id="ConstraintEntityB"
- label="Second line" tooltip="Select a line"
+ label="Second object" tooltip="Select line or arc"
shape_types="edge">
- <validator id="PartSet_DifferentObjects"/>
+ <validator id="PartSet_DifferentObjects"/>
<validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
- <validator id="GeomValidators_ShapeType" parameters="line"/>
+ <validator id="SketchPlugin_PerpendicularAttr" parameters="ConstraintEntityA"/>
+ <validator id="GeomValidators_ShapeType" parameters="edge"/>
</sketch_shape_selector>
<validator id="PartSet_PerpendicularSelection"/>
</feature>
<!-- SketchConstraintTangent -->
- <feature id="SketchConstraintTangent" title="Tangent" tooltip="Create constraint defining tangency of two objects with common coincident point" icon="icons/Sketch/tangent.png">
+ <feature id="SketchConstraintTangent" title="Tangent" tooltip="Create constraint defining tangency of two segments with common coincident point" icon="icons/Sketch/tangent.png"
+ helpfile="tangentFeature.html">
<sketch_shape_selector id="ConstraintEntityA"
label="First object" tooltip="Select line or arc" shape_types="edge">
<validator id="SketchPlugin_TangentAttr" parameters="ConstraintEntityB"/>
</feature>
<!-- SketchConstraintCoincidence -->
- <feature id="SketchConstraintCoincidence" title="Coincident" tooltip="Create constraint for the coincidence of two points or point on line or circle" icon="icons/Sketch/coincedence.png">
+ <feature id="SketchConstraintCoincidence" title="Coincident" tooltip="Create constraint for the coincidence of two points or point on line or circle" icon="icons/Sketch/coincedence.png"
+ helpfile="coincedenceFeature.html">
<sketch_shape_selector id="ConstraintEntityA" label="First object" tooltip="Select a first object" shape_types="vertex edge">
<validator id="PartSet_DifferentObjects"/>
<validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
</sketch_shape_selector>
<validator id="PartSet_CoincidentSelection"/>
</feature>
+ <!-- SketchConstraintCoincidenceInternal -->
+ <feature id="SketchConstraintCoincidenceInternal" title="Internal Coincidence" tooltip="Internal coincidence" icon="icons/Sketch/coincedence.png"
+ helpfile="coincedenceFeature.html" internal="1">
+ <sketch_shape_selector id="ConstraintEntityA" label="First object" tooltip="Select a first object" shape_types="vertex">
+ <validator id="PartSet_DifferentObjects"/>
+ <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
+ </sketch_shape_selector>
+ <sketch_shape_selector id="ConstraintEntityB" label="Second object" tooltip="Select a second object" shape_types="vertex">
+ <validator id="PartSet_DifferentObjects"/>
+ <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
+ <validator id="SketchPlugin_CoincidenceAttr" parameters="ConstraintEntityA"/>
+ </sketch_shape_selector>
+ <validator id="PartSet_CoincidentSelection"/>
+ </feature>
<!-- SketchConstraintMiddle -->
- <feature id="SketchConstraintMiddle" title="Middle point" tooltip="Create constraint for setting middle point on a line" icon="icons/Sketch/middlepoint.png">
+ <feature id="SketchConstraintMiddle" title="Middle point" tooltip="Create constraint for setting middle point on a line"
+ icon="icons/Sketch/middlepoint.png"
+ helpfile="middleFeature.html">
<sketch_shape_selector id="ConstraintEntityA" label="First object" tooltip="Select a first object" shape_types="vertex edge">
<validator id="PartSet_DifferentObjects"/>
<validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
<!-- SketchConstraintEqual -->
<feature id="SketchConstraintEqual" title="Equal"
- tooltip="Create constraint defining equal lengths of two lines or line and arc or equal radii of two arcs or two circles or arc and circle"
- icon="icons/Sketch/equal.png">
+ tooltip="Create constraint defining equal lengths of two lines or line and arc or equal radiuses of two arcs or two circles or arc and circle"
+ icon="icons/Sketch/equal.png"
+ helpfile="equalFeature.html">
<sketch_shape_selector id="ConstraintEntityA"
- label="First object" tooltip="Select line, circle or arc" shape_types="edge">
+ label="First object" tooltip="Select edge" shape_types="edge">
+ <validator id="SketchPlugin_EqualAttr" parameters="ConstraintEntityB"/>
<validator id="PartSet_DifferentObjects"/>
<validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
</sketch_shape_selector>
<sketch_shape_selector id="ConstraintEntityB"
- label="Second object" tooltip="Select line, circle or arc" shape_types="edge">
+ label="Second object" tooltip="Select edge" shape_types="edge">
<validator id="SketchPlugin_EqualAttr" parameters="ConstraintEntityA"/>
<validator id="PartSet_DifferentObjects"/>
<validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
<validator id="PartSet_EqualSelection"/>
</feature>
- <!-- SketchConstraintCollinear -->
- <feature id="SketchConstraintCollinear" title="Collinear" tooltip="Create constraint defining collinearity of two lines" icon="icons/Sketch/collinear.png">
+ <!-- SketchConstraintCollinear -->
+ <feature id="SketchConstraintCollinear" title="Collinear" tooltip="Create constraint defining collinearity of two lines"
+ icon="icons/Sketch/collinear.png"
+ helpfile="collinearFeature.html">
<sketch_shape_selector id="ConstraintEntityA"
label="First line" tooltip="Select a line" shape_types="edge">
<validator id="GeomValidators_ShapeType" parameters="line"/>
</sketch_shape_selector>
<validator id="PartSet_CollinearSelection"/>
</feature>
-
</group>
-
</workbench>
</plugin>
