<group id="Basic">
<feature
id="Sketch"
- nested="SketchPoint SketchLine SketchCircle SketchArc SketchConstraintLength SketchConstraintRadius SketchConstraintDistance SketchConstraintParallel SketchConstraintPerpendicular SketchConstraintRigid SketchConstraintHorizontal SketchConstraintVertical SketchConstraintEqual SketchConstraintTangent SketchConstraintFillet SketchConstraintCoincidence SketchConstraintMirror"
+ nested="SketchPoint SketchIntersectionPoint SketchLine SketchCircle SketchArc SketchRectangle SketchConstraintLength SketchConstraintRadius SketchConstraintDistance SketchConstraintParallel SketchConstraintPerpendicular SketchConstraintRigid SketchConstraintHorizontal SketchConstraintVertical SketchConstraintEqual SketchConstraintTangent SketchConstraintFillet SketchConstraintCoincidence SketchConstraintMirror SketchConstraintAngle SketchMultiRotation SketchMultiTranslation SketchConstraintCollinear SketchConstraintMiddle"
when_nested="accept abort"
title="Sketch"
tooltip="Create sketch"
<sketch-start-label id="External" title="Select a plane on which to create a sketch" tooltip="Select a plane on which to create a sketch">
<validator id="GeomValidators_Face" parameters="plane"/>
</sketch-start-label>
+ <error_label id="SolverError"/>
+ <validator id="SketchPlugin_SolverErrorValidator"/>
<!--icon=":pictures/x_point.png"-->
</feature>
+
+ <!-- SketchPoint -->
<feature id="SketchPoint" title="Point" tooltip="Create point" icon=":icons/point.png">
- <sketch-2dpoint_selector id="PointCoordindates" title="Point" tooltip="Point coordinates"/>
+ <sketch-2dpoint_selector id="PointCoordindates" accept_expressions="0" title="Point" tooltip="Point coordinates"/>
<boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
</feature>
+
+ <!-- Intersection Point -->
+ <feature
+ id="SketchIntersectionPoint"
+ title="Intersection Point"
+ tooltip="Create intersection point"
+ icon=":icons/point.png">
+ <sketch_shape_selector
+ id="ExternalLine"
+ label="Edge"
+ tooltip="Select external line."
+ shape_types="edge"
+ use_external="false"
+ use_sketch_plane="false">
+ <validator id="GeomValidators_ShapeType" parameters="line"/>
+ <validator id="SketchPlugin_IntersectionValidator"/>
+ </sketch_shape_selector>
+ </feature>
+
+ <!-- SketchLine -->
<feature id="SketchLine" title="Line" tooltip="Create line" icon=":icons/line.png">
- <sketch-2dpoint_selector id="StartPoint" title="Start point" tooltip="Start point coordinates" previous_feature_param="EndPoint"/>
- <sketch-2dpoint_selector id="EndPoint" title="End point" tooltip="End point coordinates"/>
+ <sketch-2dpoint_selector id="StartPoint" accept_expressions="0" title="Start point" tooltip="Start point coordinates" previous_feature_param="EndPoint"/>
+ <sketch-2dpoint_selector id="EndPoint" accept_expressions="0" title="End point" tooltip="End point coordinates"/>
<boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
+ <validator id="GeomValidators_Different" parameters="StartPoint,EndPoint"/>
</feature>
- <feature id="SketchCircle" title="Circle" tooltip="Create circle" icon=":icons/circle.png">
- <sketch-2dpoint_selector id="CircleCenter" title="Center" tooltip="Center coordinates"/>
- <point2ddistance id="CircleRadius" first_point="CircleCenter" label="Radius:" min="0" step="1.0" default="0" icon=":icons/radius.png" tooltip="Set radius">
- <validator id="GeomValidators_Positive"/>
- </point2ddistance>
+
+ <!-- SketchCircle -->
+ <feature
+ id="SketchCircle"
+ title="Circle"
+ tooltip="Create circle"
+ icon=":icons/circle.png">
+ <toolbox id="CircleType">
+ <box id="CenterRadius" title="Center and radius" icon=":icons/circle_pt_rad_32x32.png">
+ <sketch-2dpoint_selector id="CircleCenter" accept_expressions="0" title="Center" tooltip="Center coordinates"/>
+ <point2ddistance id="CircleRadius" accept_expressions="0" first_point="CircleCenter" label="Radius:" min="0" step="1.0" default="0" icon=":icons/radius.png" tooltip="Set radius">
+ <validator id="GeomValidators_Positive"/>
+ </point2ddistance>
+ </box>
+ <box id="ThreePoints" title="Three points" icon=":icons/circle_3pt_32x32.png">
+ <sketch-2dpoint_selector id="FirstPoint" accept_expressions="0" title="First point" tooltip="First point"/>
+ <sketch-2dpoint_selector id="SecondPoint" accept_expressions="0" title="Second point" tooltip="Second point"/>
+ <sketch-2dpoint_selector id="ThirdPoint" accept_expressions="0" title="Third point" tooltip="Third point"/>
+ </box>
+ </toolbox>
<boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
</feature>
- <feature id="SketchArc" title="Arc" tooltip="Create arc" icon=":icons/arc.png">
- <sketch-2dpoint_selector id="ArcCenter" title="Center" tooltip="Center of a circle"/>
- <sketch-2dpoint_selector id="ArcStartPoint" title="Start point" tooltip="Start point"/>
- <sketch-2dpoint_selector id="ArcEndPoint" title="End point" tooltip="End point"/>
+
+ <!-- SketchArc -->
+ <feature
+ id="SketchArc"
+ title="Arc"
+ tooltip="Create arc"
+ icon=":icons/arc.png">
+ <toolbox id="ArcType">
+ <box id="CenterStartEnd" title="Center and two points" icon=":icons/arc_base_32x32.png">
+ <sketch-2dpoint_selector id="ArcCenter" accept_expressions="0" title="Center" tooltip="Center of a circle"/>
+ <sketch-2dpoint_selector id="ArcStartPoint" accept_expressions="0" title="Start point" tooltip="Start point"/>
+ <sketch-2dpoint_selector id="ArcEndPoint" accept_expressions="0" title="End point" tooltip="End point"/>
+ <validator id="GeomValidators_Different" parameters="ArcCenter,ArcStartPoint,ArcEndPoint"/>
+ </box>
+ <box id="ThreePoints" title="Three points on arc" icon=":icons/arc_3pt_32x32.png">
+ <sketch-2dpoint_selector id="ArcStartPoint" accept_expressions="0" title="Start point" tooltip="Start point"/>
+ <sketch-2dpoint_selector id="ArcEndPoint" accept_expressions="0" title="End point" tooltip="End point"/>
+ <sketch-2dpoint_selector id="ArcPassedPoint" accept_expressions="0" title="Passed point" tooltip="Passed point"/>
+ <doublevalue id="ArcRadius" accept_expressions="0" label="Radius:" default="computed" icon=":icons/radius.png" tooltip="Set radius" obligatory="0">
+ <validator id="GeomValidators_Positive"/>
+ </doublevalue>
+ <doublevalue id="ArcAngle" label="Angle:" icon=":icons/angle.png" tooltip="Set angle" default="90" use_reset="false" obligatory="0"/>
+ <validator id="GeomValidators_Different" parameters="ArcStartPoint,ArcEndPoint,ArcPassedPoint"/>
+ </box>
+ <box id="Tangent" title="Tangent with edge" icon=":icons/arc_tang_32x32.png">
+ <sketch_shape_selector id="ArcTangentPoint" label="Start point" tooltip="Select point on line" shape_types="vertex">
+ <validator id="SketchPlugin_ArcTangentPoint" parameters="" />
+ </sketch_shape_selector>
+ <sketch-2dpoint_selector id="ArcEndPoint" accept_expressions="0" title="End point" tooltip="End point"/>
+ <doublevalue id="ArcRadius" accept_expressions="0" label="Radius:" default="computed" icon=":icons/radius.png" tooltip="Set radius" obligatory="0">
+ <validator id="GeomValidators_Positive"/>
+ </doublevalue>
+ <doublevalue id="ArcAngle" label="Angle:" icon=":icons/angle.png" tooltip="Set angle" default="90" use_reset="false" obligatory="0"/>
+ </box>
+ </toolbox>
<boolvalue id="Auxiliary" label="Auxiliary" default="false" tooltip="Construction element" obligatory="0"/>
</feature>
</group>
+
+ <group id="Macro">
+ <!-- SketchConstraintFillet -->
+ <feature id="SketchConstraintFillet" title="Fillet" tooltip="Create constraint defining fillet between two objects" icon=":icons/fillet.png">
+ <!--<sketch_shape_selector id="ConstraintEntityA"
+ label="Point" tooltip="Select point for fillet (should be shared by two entities only)" shape_types="vertex">
+ <validator id="SketchPlugin_FilletVertexValidator"/>
+ </sketch_shape_selector>-->
+ <sketch_multi_selector id="ConstraintEntityA"
+ label="Points:"
+ tooltip="Select points for fillets"
+ type_choice="Vertices">
+ <validator id="SketchPlugin_FilletVertexValidator"/>
+ </sketch_multi_selector>
+ <doublevalue label="Radius" tooltip="Fillet arc radius" id="ConstraintValue" accept_expressions="0" min="0" use_reset="false">
+ <validator id="GeomValidators_Positive"/>
+ </doublevalue>
+ <validator id="PartSet_FilletSelection"/>
+ </feature>
+ </group>
<group id="Constraints">
<!-- SketchConstraintDistance -->
tooltip="Select point, line end point, line, center of circle or arc."
shape_types="edge vertex">
<validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
- <validator id="GeomValidators_EdgeOrVertex"/>
- </sketch_shape_selector>/>
+ <validator id="PartSet_DifferentObjects"/>
+ <validator id="GeomValidators_ShapeType" parameters="vertex,line"/>
+ </sketch_shape_selector>
<sketch_shape_selector
id="ConstraintEntityB"
label="Second object"
<validator id="PartSet_DifferentObjects"/>
<validator id="SketchPlugin_DistanceAttr" parameters="ConstraintEntityA"/>
<validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
- <validator id="GeomValidators_EdgeOrVertex"/>
+ <validator id="GeomValidators_ShapeType" parameters="vertex,line"/>
</sketch_shape_selector>
- <sketch-2dpoint_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
+ <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
<doublevalue_editor label="Value" tooltip="Distance" id="ConstraintValue" default="computed" min="0">
<validator id="GeomValidators_Positive"/>
<!-- SketchConstraintLength -->
<feature id="SketchConstraintLength" title="Length" tooltip="Set fixed length of a line segment" icon=":icons/length.png">
<label title="Select a line on which to calculate length" tooltip="Select a line on which to calculate length"/>
- <shape_selector id="ConstraintEntityA" label="Line" tooltip="Select an line"
- shape_types="edge" >
- <validator id="GeomValidators_Edge" parameters="line"/>
- </shape_selector>
- <sketch-2dpoint_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
+ <shape_selector id="ConstraintEntityA" label="Line" tooltip="Select an line" shape_types="edge" >
+ <validator id="GeomValidators_ShapeType" parameters="line"/>
+ </shape_selector>
+ <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
<doublevalue_editor label="Value" tooltip="Length" id="ConstraintValue" default="computed">
<validator id="GeomValidators_Positive"/>
</doublevalue_editor>
<label title="Select a circle or an arc on which to calculate radius" tooltip="Select a circle or an arc on which to calculate radius"/>
<shape_selector id="ConstraintEntityA" label="Circle or Arc" tooltip="Select a circle or an arc"
shape_types="edge">
- <validator id="GeomValidators_Edge" parameters="circle"/>
+ <validator id="GeomValidators_ShapeType" parameters="circle"/>
</shape_selector>
- <sketch-2dpoint_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
- <doublevalue_editor label="Value" tooltip="Radius" id="ConstraintValue" default="computed"/>
+ <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
+ <doublevalue_editor label="Value" tooltip="Radius" id="ConstraintValue" default="computed">
+ <validator id="GeomValidators_Positive"/>
+ </doublevalue_editor>
<validator id="PartSet_RadiusSelection"/>
</feature>
-
- <!-- SketchConstraintParallel -->
+
+ <!-- SketchConstraintAngle -->
+ <feature id="SketchConstraintAngle" title="Angle" tooltip="Set fixed angle between two line segments" icon=":icons/angle_constr.png">
+ <sketch_shape_selector id="ConstraintEntityA" label="Line 1" tooltip="Select an line" shape_types="edge" >
+ <validator id="GeomValidators_ShapeType" parameters="line"/>
+ <validator id="PartSet_DifferentObjects"/>
+ <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
+ </sketch_shape_selector>
+ <sketch_shape_selector id="ConstraintEntityB" label="Line 2" tooltip="Select an line" shape_types="edge" >
+ <validator id="GeomValidators_ShapeType" parameters="line"/>
+ <validator id="PartSet_DifferentObjects"/>
+ <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
+ </sketch_shape_selector>
+ <sketch-2dpoint_flyout_selector id="ConstraintFlyoutValuePnt" default="computed" internal="1" obligatory="0"/>
+ <doublevalue_editor label="Value" tooltip="Angle" id="ConstraintValue" default="computed" min="0" max="180" />
+ <validator id="PartSet_AngleSelection"/>
+ </feature>
+
+ <!-- SketchConstraintParallel -->
<feature id="SketchConstraintParallel" title="Parallel" tooltip="Create constraint defining two parallel lines" icon=":icons/parallel.png">
<sketch_shape_selector id="ConstraintEntityA"
label="First line" tooltip="Select a line" shape_types="edge">
- <validator id="GeomValidators_Edge" parameters="line"/>
+ <validator id="GeomValidators_ShapeType" parameters="line"/>
<validator id="PartSet_DifferentObjects"/>
<validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
</sketch_shape_selector>
<sketch_shape_selector id="ConstraintEntityB" label="Second line" tooltip="Select a line"
shape_types="edge">
- <validator id="GeomValidators_Edge" parameters="line"/>
+ <validator id="GeomValidators_ShapeType" parameters="line"/>
<validator id="PartSet_DifferentObjects"/>
<validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
</sketch_shape_selector>
<sketch_shape_selector id="ConstraintEntityA"
label="First line" tooltip="Select an line"
shape_types="edge">
+ <validator id="PartSet_DifferentObjects"/>
<validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
- <validator id="GeomValidators_Edge" parameters="line"/>
+ <validator id="GeomValidators_ShapeType" parameters="line"/>
</sketch_shape_selector>
<sketch_shape_selector id="ConstraintEntityB"
shape_types="edge">
<validator id="PartSet_DifferentObjects"/>
<validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
- <validator id="GeomValidators_Edge" parameters="line"/>
+ <validator id="GeomValidators_ShapeType" parameters="line"/>
</sketch_shape_selector>
<validator id="PartSet_PerpendicularSelection"/>
</feature>
- <!-- SketchConstraintCoincedence -->
- <feature id="SketchConstraintCoincidence" title="Coincident" tooltip="Create constraint for the coincidence of two points" icon=":icons/coincedence.png">
- <sketch_shape_selector id="ConstraintEntityA" label="First point" tooltip="Select a first point" shape_types="vertex">
+ <!-- SketchConstraintCoincidence -->
+ <feature id="SketchConstraintCoincidence" title="Coincident" tooltip="Create constraint for the coincidence of two points or point on line or circle" icon=":icons/coincedence.png">
+ <sketch_shape_selector id="ConstraintEntityA" label="First object" tooltip="Select a first object" shape_types="vertex edge">
+ <validator id="PartSet_DifferentObjects"/>
<validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
</sketch_shape_selector>
- <sketch_shape_selector id="ConstraintEntityB" label="Second point" tooltip="Select a second point" shape_types="vertex">
+ <sketch_shape_selector id="ConstraintEntityB" label="Second object" tooltip="Select a second object" shape_types="vertex edge">
<validator id="PartSet_DifferentObjects"/>
<validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
+ <validator id="SketchPlugin_CoincidenceAttr" parameters="ConstraintEntityA"/>
</sketch_shape_selector>
<validator id="PartSet_CoincidentSelection"/>
</feature>
<!-- SketchConstraintRigid -->
<feature id="SketchConstraintRigid" title="Fixed" tooltip="Fix an object" icon=":icons/fixed.png">
- <shape_selector id="ConstraintEntityA" label="Object" tooltip="Select an object"
- shape_types="edge vertex">
- <validator id="PartSet_SketchEntityValidator" parameters="SketchPoint,SketchLine,SketchCircle,SketchArc"/>
+ <sketch_shape_selector id="ConstraintEntityA" label="Object"
+ tooltip="Select point, line end point, line, center of circle or arc."
+ shape_types="edge vertex">
+ <validator id="GeomValidators_ShapeType" parameters="vertex,line,circle"/>
<validator id="SketchPlugin_NotFixed"/>
- </shape_selector>
+ </sketch_shape_selector>
<validator id="PartSet_RigidSelection"/>
</feature>
-
- <!-- SketchConstraintHorizontal -->
+
+ <!-- SketchConstraintHorizontal -->
<feature id="SketchConstraintHorizontal" title="Horizontal" tooltip="Create constraint defining horizontal line" icon=":icons/horisontal.png">
<sketch_shape_selector id="ConstraintEntityA"
label="Line" tooltip="Select a line" shape_types="edge" use_external="false">
- <validator id="GeomValidators_Edge" parameters="line"/>
+ <validator id="GeomValidators_ShapeType" parameters="line"/>
</sketch_shape_selector>
<validator id="PartSet_HVDirSelection"/>
</feature>
<feature id="SketchConstraintVertical" title="Vertical" tooltip="Create constraint defining vertical line" icon=":icons/vertical.png">
<sketch_shape_selector id="ConstraintEntityA"
label="Line" tooltip="Select a line" shape_types="edge" use_external="false">
- <validator id="GeomValidators_Edge" parameters="line"/>
+ <validator id="GeomValidators_ShapeType" parameters="line"/>
</sketch_shape_selector>
<validator id="PartSet_HVDirSelection"/>
</feature>
icon=":icons/equal.png">
<sketch_shape_selector id="ConstraintEntityA"
label="First object" tooltip="Select line, circle or arc" shape_types="edge">
+ <validator id="PartSet_DifferentObjects"/>
<validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
</sketch_shape_selector>
<validator id="PartSet_DifferentObjects"/>
<validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
</sketch_shape_selector>
+ <validator id="PartSet_EqualSelection"/>
</feature>
<!-- SketchConstraintTangent -->
- <feature id="SketchConstraintTangent" title="Tangent" tooltip="Create constraint defining tangency of two objects" icon=":icons/tangent.png">
+ <feature id="SketchConstraintTangent" title="Tangent" tooltip="Create constraint defining tangency of two objects with common coincident point" icon=":icons/tangent.png">
<sketch_shape_selector id="ConstraintEntityA"
label="First object" tooltip="Select line or arc" shape_types="edge">
+ <validator id="SketchPlugin_TangentAttr" parameters="ConstraintEntityB"/>
+ <validator id="PartSet_DifferentObjects"/>
</sketch_shape_selector>
<sketch_shape_selector id="ConstraintEntityB"
label="Second object" tooltip="Select line or arc" shape_types="edge">
- <validator id="SketchPlugin_TangentAttr" parameters="ConstraintEntityA"/>
- <validator id="PartSet_DifferentObjects"/>
+ <validator id="SketchPlugin_TangentAttr" parameters="ConstraintEntityA"/>
+ <validator id="PartSet_DifferentObjects"/>
</sketch_shape_selector>
<validator id="PartSet_TangentSelection"/>
</feature>
-
- </group>
-
- <group id="Edit">
- <!-- SketchConstraintFillet -->
- <feature id="SketchConstraintFillet" title="Fillet" tooltip="Create constraint defining fillet between two objects" icon=":icons/fillet.png">
+ <!-- SketchConstraintCollinear -->
+ <feature id="SketchConstraintCollinear" title="Collinear" tooltip="Create constraint defining collinearity of two lines" icon=":icons/collinear.png">
<sketch_shape_selector id="ConstraintEntityA"
- label="First object" tooltip="Select line or arc" shape_types="edge">
+ label="First line" tooltip="Select a line" shape_types="edge">
+ <validator id="GeomValidators_ShapeType" parameters="line"/>
<validator id="PartSet_DifferentObjects"/>
</sketch_shape_selector>
-
+
<sketch_shape_selector id="ConstraintEntityB"
- label="Second object" tooltip="Select line or arc" shape_types="edge">
+ label="Second line" tooltip="Select a line" shape_types="edge">
+ <validator id="GeomValidators_ShapeType" parameters="line"/>
<validator id="PartSet_DifferentObjects"/>
</sketch_shape_selector>
+ <validator id="PartSet_CollinearSelection"/>
+ </feature>
- <doublevalue label="Value" tooltip="Fillet radius" id="ConstraintValue" min="0">
- <validator id="GeomValidators_Positive"/>
- </doublevalue>
- <validator id="PartSet_FilletSelection"/>
+ <!-- SketchConstraintMiddle -->
+ <feature id="SketchConstraintMiddle" title="Middle point" tooltip="Create constraint for setting middle point on a line" icon=":icons/middlepoint.png">
+ <sketch_shape_selector id="ConstraintEntityA" label="First object" tooltip="Select a first object" shape_types="vertex edge">
+ <validator id="PartSet_DifferentObjects"/>
+ <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityB"/>
+ <validator id="SketchPlugin_MiddlePointAttr" parameters="ConstraintEntityB"/>
+ </sketch_shape_selector>
+ <sketch_shape_selector id="ConstraintEntityB" label="Second object" tooltip="Select a second object" shape_types="vertex edge">
+ <validator id="PartSet_DifferentObjects"/>
+ <validator id="SketchPlugin_ExternalValidator" parameters="ConstraintEntityA"/>
+ <validator id="SketchPlugin_MiddlePointAttr" parameters="ConstraintEntityA"/>
+ </sketch_shape_selector>
+ <validator id="PartSet_MiddlePointSelection"/>
</feature>
-
+
+ </group>
+
+ <group id="Edit">
<!-- SketchConstraintMirror -->
<feature
id="SketchConstraintMirror"
tooltip="Create constraint, mirroring group of objects">
<sketch_shape_selector id="ConstraintEntityA"
label="Mirror line" tooltip="Select mirror line" shape_types="edge">
- <validator id="GeomValidators_Edge" parameters="line"/>
+ <validator id="GeomValidators_ShapeType" parameters="line"/>
</sketch_shape_selector>
- <multi_selector id="ConstraintMirrorList"
- label="List of objects"
+ <sketch_multi_selector id="ConstraintMirrorList"
+ label="Segments:"
tooltip="Select list of mirroring objects"
- type_choice="Edges">
+ type_choice="Edges"
+ use_external="true">
<validator id="SketchPlugin_MirrorAttr" />
- </multi_selector>
+ </sketch_multi_selector>
+ </feature>
+
+ <!-- SketchMultiTranslation -->
+ <feature
+ id="SketchMultiTranslation"
+ title="Translation" icon=":icons/translate.png"
+ tooltip="Multiple translation">
+ <sketch_multi_selector id="MultiTranslationList"
+ label="Segments:"
+ tooltip="Select list of translating objects"
+ type_choice="Edges"
+ use_external="true">
+ <validator id="SketchPlugin_CopyValidator" />
+ </sketch_multi_selector>
+ <toolbox id="ValueType">
+ <box id="SingleValue" title="Single value" icon=":icons/translate_32x32.png">
+ <groupbox title="Direction">
+ <sketch_shape_selector
+ id="MultiTranslationStartPoint"
+ label="Start point"
+ tooltip="Start point of translation"
+ shape_types="vertex">
+ <validator id="PartSet_DifferentObjects"/>
+ <validator id="GeomValidators_ShapeType" parameters="vertex"/>
+ </sketch_shape_selector>
+ <sketch_shape_selector
+ id="MultiTranslationEndPoint"
+ label="End point"
+ tooltip="Final point of translation"
+ shape_types="vertex">
+ <validator id="PartSet_DifferentObjects"/>
+ <validator id="GeomValidators_ShapeType" parameters="vertex"/>
+ </sketch_shape_selector>
+ </groupbox>
+ </box>
+ <box id="FullValue" title="Full value" icon=":icons/translate_full_32x32.png">
+ <groupbox title="Direction">
+ <sketch_shape_selector
+ id="MultiTranslationStartPoint"
+ label="Start point"
+ tooltip="Start point of translation"
+ shape_types="vertex">
+ <validator id="PartSet_DifferentObjects"/>
+ <validator id="GeomValidators_ShapeType" parameters="vertex"/>
+ </sketch_shape_selector>
+ <sketch_shape_selector
+ id="MultiTranslationEndPoint"
+ label="End point"
+ tooltip="Final point of translation"
+ shape_types="vertex">
+ <validator id="PartSet_DifferentObjects"/>
+ <validator id="GeomValidators_ShapeType" parameters="vertex"/>
+ </sketch_shape_selector>
+ </groupbox>
+ </box>
+ </toolbox>
+ <integervalue id="MultiTranslationObjects"
+ label="Total number of objects"
+ tooltip="Total number of objects"
+ default="2" min="2" use_reset="false">
+ <validator id="GeomValidators_Positive"/>
+ </integervalue>
+ </feature>
+
+ <!-- SketchMultiRotation -->
+ <feature
+ id="SketchMultiRotation"
+ title="Rotation" icon=":icons/rotate.png"
+ tooltip="Multiple rotation">
+ <sketch_multi_selector id="MultiRotationList"
+ label="Segments:"
+ tooltip="Select list of rotating objects"
+ type_choice="Edges"
+ use_external="true">
+ <validator id="SketchPlugin_CopyValidator" />
+ </sketch_multi_selector>
+ <sketch_shape_selector
+ id="MultiRotationCenter"
+ label="Center of rotation"
+ tooltip="Center of rotation"
+ shape_types="vertex">
+ <validator id="GeomValidators_ShapeType" parameters="vertex"/>
+ </sketch_shape_selector>
+ <toolbox id="AngleType">
+ <box id="SingleAngle" title="Single angle" icon=":icons/angle_up_32x32.png">
+ <doublevalue id="MultiRotationAngle"
+ label="Angle"
+ icon=":icons/angle.png"
+ tooltip="Rotation angle"
+ default="90" use_reset="false"/>
+ </box>
+ <box id="FullAngle" title="Full angle" icon=":icons/angle_up_full_32x32.png">
+ <doublevalue id="MultiRotationAngle"
+ label="Angle"
+ icon=":icons/angle.png"
+ tooltip="Rotation angle"
+ default="90" use_reset="false"/>
+ </box>
+ </toolbox>
+ <integervalue id="MultiRotationObjects"
+ label="Total number of objects"
+ tooltip="Total number of objects"
+ default="2" min="2" use_reset="false">
+ <validator id="GeomValidators_Positive"/>
+ </integervalue>
</feature>
</group>
</workbench>