-## Copyright (C) 2018-20xx CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
+# Copyright (C) 2018-2023 CEA, EDF
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
"""
TestIntersectionWithSpline.py
SketchConstraintDistanceHorizontal_1 = Sketch_1.setHorizontalDistance(SketchArc_1.center(), SketchAPI_Line(SketchLine_3).startPoint(), 20)
SketchConstraintLength_2 = Sketch_1.setLength(SketchLine_1.result(), 55)
model.do()
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_1f-SketchLine_2f")], model.selection(), 25, 25)
-Filling_1 = model.addFilling(Part_1_doc, [model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/From_Face_1"), model.selection("EDGE", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/To_Face_1")])
-Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_1_2f-SketchLine_1f-SketchLine_2f")])
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_1_2r-SketchLine_1f-SketchLine_2f")], model.selection(), 25, 25)
+Filling_1 = model.addFilling(Part_1_doc, [model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2][Extrusion_1_1/From_Face]"), model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_1/To_Face]")])
+Face_1 = model.addFace(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchArc_1_2r-SketchLine_1f-SketchLine_2f")])
Intersection_1 = model.addIntersection(Part_1_doc, [model.selection("FACE", "Filling_1_1"), model.selection("FACE", "Face_1_1")])
Sketch_2 = model.addSketch(Part_1_doc, model.defaultPlane("XOY"))
SketchLine_4 = Sketch_2.addLine(-34.11217447219568, 40, 20, -37.28019411294778)
SketchConstraintDistance_3 = Sketch_2.setDistance(SketchAPI_Point(SketchPoint_1).coordinates(), SketchLine_4.result(), "D", True)
SketchConstraintAngle_1 = Sketch_2.setAngle(SketchLine_5.result(), SketchLine_4.result(), 35)
model.do()
-Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_4f-SketchLine_5f-SketchLine_6f")], model.selection(), 10, 10)
+Extrusion_2 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_4r-SketchLine_5f-SketchLine_6f")], model.selection(), 10, 10)
ExtrusionFuse_1 = model.addExtrusionFuse(Part_1_doc, [], model.selection(), 10, 0, [model.selection("SOLID", "Extrusion_2_1")])
-Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/Generated_Face_3"))
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_2_1/Generated_Face&Sketch_2/SketchLine_4"))
SketchIntersectionPoint_1 = Sketch_3.addIntersectionPoint(model.selection("EDGE", "Intersection_1_1"), False)
[SketchPoint_2, SketchPoint_3] = SketchIntersectionPoint_1.intersectionPoints()
SketchCircle_1 = Sketch_3.addCircle(-33.22640570408476, 0, 5)
assert(SketchIntersectionPoint_1.feature().results().size() == 1)
model.testNbResults(ExtrusionFuse_1, 1)
-model.testNbSubResults(ExtrusionFuse_1, [1])
+model.testNbSubResults(ExtrusionFuse_1, [0])
model.testNbSubShapes(ExtrusionFuse_1, GeomAPI_Shape.SOLID, [1])
-model.testNbSubShapes(ExtrusionFuse_1, GeomAPI_Shape.FACE, [11])
-model.testNbSubShapes(ExtrusionFuse_1, GeomAPI_Shape.EDGE, [42])
-model.testNbSubShapes(ExtrusionFuse_1, GeomAPI_Shape.VERTEX, [84])
-model.testResultsVolumes(ExtrusionFuse_1, [89224.362837261898675933480262756])
+model.testNbSubShapes(ExtrusionFuse_1, GeomAPI_Shape.FACE, [9])
+model.testNbSubShapes(ExtrusionFuse_1, GeomAPI_Shape.EDGE, [30])
+model.testNbSubShapes(ExtrusionFuse_1, GeomAPI_Shape.VERTEX, [60])
+model.testResultsVolumes(ExtrusionFuse_1, [89638.890852351003559306263923645])
# change parameter and check intersection is NOT valid now
ParamD.setValue(50)
