Cosmetics. Move XML files to the separate folder inside a corresponding project in VS.

[modules/shaper.git] / src / SketchPlugin / Test / TestIntersectionWithCircle.py

diff --git a/src/SketchPlugin/Test/TestIntersectionWithCircle.py b/src/SketchPlugin/Test/TestIntersectionWithCircle.py
index 47237e813efcc58ca049df377190d3b244541223..39087d33013f3d9e90c2585359400c69eacc0369 100644 (file)
--- a/src/SketchPlugin/Test/TestIntersectionWithCircle.py
+++ b/src/SketchPlugin/Test/TestIntersectionWithCircle.py
@@ -1,22 +1,21 @@
-## Copyright (C) 2018-20xx  CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
+# Copyright (C) 2018-2020  CEA/DEN, EDF R&D
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
 
 """
     TestIntersectionWithCircle.py
@@ -56,10 +55,10 @@ SketchConstraintLength_1 = Sketch_1.setLength(SketchLine_2.result(), 50)
 SketchConstraintRadius_1 = Sketch_1.setRadius(SketchArc_1.results()[1], 10)
 SketchConstraintDistance_1 = Sketch_1.setDistance(SketchArc_1.center(), SketchLine_2.result(), 19, True)
 model.do()
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_4f-SketchArc_1_2r")], model.selection(), 10, 0)
-Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face_4"), "D", True)
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2f-SketchLine_3f-SketchLine_4f-SketchArc_1_2r")], model.selection(), 10, 0)
+Plane_4 = model.addPlane(Part_1_doc, model.selection("FACE", "Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_2"), "D", True)
 Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Plane_1"))
-SketchIntersectionPoint_1 = Sketch_2.addIntersectionPoint(model.selection("EDGE", "Extrusion_1_1/Generated_Face_1&Extrusion_1_1/To_Face_1"), True)
+SketchIntersectionPoint_1 = Sketch_2.addIntersectionPoint(model.selection("EDGE", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_1/To_Face]"), True)
 SketchIntersectionPoint_1.result().setName("SketchIntersectionPoint_1")
 [SketchPoint_2, SketchPoint_3] = SketchIntersectionPoint_1.intersectionPoints()
 SketchCircle_1 = Sketch_2.addCircle(38.14142842854285, 10, 1)
@@ -83,7 +82,7 @@ SketchConstraintCoincidence_13 = Sketch_2.setCoincident(SketchArc_2.endPoint(),
 SketchConstraintDistanceVertical_2 = Sketch_2.setVerticalDistance(SketchAPI_Point(SketchPoint_3).coordinates(), SketchArc_2.startPoint(), 5)
 SketchConstraintTangent_1 = Sketch_2.setTangent(SketchArc_2.results()[1], SketchLine_6.result())
 model.do()
-RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_5r-SketchLine_6r-SketchLine_7r-SketchArc_2_2f")], model.selection("EDGE", "Sketch_2/Edge-SketchLine_5"), 360, 0, [model.selection("SOLID", "Extrusion_1_1")])
+RevolutionCut_1 = model.addRevolutionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchLine_7r-SketchLine_6r-SketchArc_2_2f-SketchLine_5r")], model.selection("EDGE", "Sketch_2/SketchLine_5"), 360, 0, [model.selection("SOLID", "Extrusion_1_1")])
 ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("FACE", "Sketch_2/Face-SketchCircle_1_2f")], model.selection(), 5, 5, [model.selection("SOLID", "RevolutionCut_1_1")])
 model.do()