-## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
+# Copyright (C) 2014-2023 CEA, EDF
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
"""
TestCreateCircleByCenterAndPassed.py
subroutine to verify position of last circle in the sketch
"""
aLastCircle = model.lastSubFeature(theSketch, "SketchCircle")
- aCenter = geomDataAPI_Point2D(aLastCircle.attribute("circle_center"))
- verifyPointCoordinates(aCenter, theX, theY)
- aRadius = aLastCircle.real("circle_radius")
- assert aRadius.value() == theR, "Wrong radius {0}, expected {1}".format(aRadius.value(), theR)
-
-def verifyPointCoordinates(thePoint, theX, theY):
- assert thePoint.x() == theX and thePoint.y() == theY, "Wrong '{0}' point ({1}, {2}), expected ({3}, {4})".format(thePoint.id(), thePoint.x(), thePoint.y(), theX, theY)
+ model.assertCircle(aLastCircle, [theX, theY], theR)
def verifyPointOnLine(thePoint, theLine):
- aDistance = distancePointLine(thePoint, theLine)
+ aDistance = model.distancePointLine(thePoint, theLine)
assert aDistance < TOLERANCE, "Point is not on Line, distance: {0}".format(aDistance)
def verifyTangentCircles(theCircle1, theCircle2):
aRDiff = math.fabs(aRadius1 - aRadius2)
assert math.fabs(aRSum - aDistCC) < TOLERANCE or math.fabs(aRDiff - aDistCC) < TOLERANCE, "Circles do not tangent"
-def distancePointLine(thePoint, theLine):
- aLineStart = geomDataAPI_Point2D(theLine.attribute("StartPoint")).pnt().xy()
- aLineEnd = geomDataAPI_Point2D(theLine.attribute("EndPoint")).pnt().xy()
- aLineDir = aLineEnd.decreased(aLineStart)
- aLineLen = aLineEnd.distance(aLineStart)
- aPntDir = thePoint.pnt().xy().decreased(aLineStart)
- return math.fabs(aPntDir.cross(aLineDir) / aLineLen)
+def verifyTangentCircleLine(theCircle, theLine):
+ aCenter = geomDataAPI_Point2D(theCircle.attribute("circle_center"))
+ aRadius = theCircle.real("circle_radius").value()
+ aDistCL = model.distancePointLine(aCenter, theLine)
+ assert math.fabs(aDistCL - aRadius) < TOLERANCE, "Circle and line are not tangent"
#=========================================================================
aRadius = model.distancePointPoint(aPrevCenter, aPointCoord)
aSession.finishOperation()
assert (aSketchFeature.numberOfSubs() == 6)
-verifyPointCoordinates(aPointCoord, aPointCoordinates[0], aPointCoordinates[1])
+model.assertPoint(aPointCoord, aPointCoordinates)
verifyLastCircle(aSketchFeature, aPointCoord.x(), aPointCoord.y(), aRadius)
model.testNbSubFeatures(aSketch, "SketchConstraintCoincidence", 2)
aSession.finishOperation()
assert (aSketchFeature.numberOfSubs() == 10)
# check connected features do not change their positions
-verifyPointCoordinates(aPrevCenter, aPrevCenterXY[0], aPrevCenterXY[1])
+model.assertPoint(aPrevCenter, aPrevCenterXY)
assert(aPrevCircle.real("circle_radius").value() == aPrevRadius)
-verifyPointCoordinates(aStartPnt, aLineStart[0], aLineStart[1])
-verifyPointCoordinates(aEndPnt, aLineEnd[0], aLineEnd[1])
+model.assertLine(aLine, aLineStart, aLineEnd)
# verify newly created circle
aCircle = model.lastSubFeature(aSketchFeature, "SketchCircle")
aCenter = geomDataAPI_Point2D(aCircle.attribute("circle_center"))
-verifyPointCoordinates(aCenter, anExpectedCenter[0], anExpectedCenter[1])
+model.assertPoint(aCenter, anExpectedCenter)
verifyPointOnLine(aCenter, aLine)
verifyTangentCircles(aCircle, aPrevCircle)
model.testNbSubFeatures(aSketch, "SketchConstraintCoincidence", 3)
model.testNbSubFeatures(aSketch, "SketchConstraintTangent", 1)
+#=========================================================================
+# Test 5. Create a circle as a macro-feature by center and passed point on line
+#=========================================================================
+# create new circle
+aSession.startOperation()
+aCircle = aSketchFeature.addFeature("SketchMacroCircle")
+aCenter = geomDataAPI_Point2D(aCircle.attribute("center_point"))
+aCenterRef = aCircle.refattr("center_point_ref")
+aPassed = geomDataAPI_Point2D(aCircle.attribute("passed_point"))
+aPassedRef = aCircle.refattr("passed_point_ref")
+aCircleType = aCircle.string("circle_type")
+# initialize attributes
+aCircleType.setValue("circle_type_by_center_and_passed_points")
+anExpectedCenter = [(aLineStart[0] + aLineEnd[0]) * 0.5 + 10., (aLineStart[1] + aLineEnd[1]) * 0.5]
+aCenter.setValue(anExpectedCenter[0], anExpectedCenter[1])
+aPassedRef.setObject(aLine.lastResult())
+aPassed.setValue(aLineStart[0], aLineStart[1])
+aSession.finishOperation()
+assert (aSketchFeature.numberOfSubs() == 12)
+# check connected features do not change their positions
+model.assertLine(aLine, aLineStart, aLineEnd)
+# verify newly created circle
+aCircle = model.lastSubFeature(aSketchFeature, "SketchCircle")
+aCenter = geomDataAPI_Point2D(aCircle.attribute("circle_center"))
+model.assertPoint(aCenter, anExpectedCenter)
+verifyTangentCircleLine(aCircle, aLine)
+model.testNbSubFeatures(aSketch, "SketchConstraintCoincidence", 3)
+model.testNbSubFeatures(aSketch, "SketchConstraintTangent", 2)
+
#=========================================================================
# Test 5. Create a circle as a macro-feature by center and passed point placed on the same line
# Check the circle is not created
aSession.startOperation()
aDocument.removeFeature(aCircle)
aSession.finishOperation()
-assert (aSketchFeature.numberOfSubs() == 10)
+assert (aSketchFeature.numberOfSubs() == 12)
#=========================================================================
# End of test
