-## Copyright (C) 2018-20xx CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
+# Copyright (C) 2018-2023 CEA, EDF
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
"""
Test2119.py
SketchPoint_1 = Sketch_1.addPoint(model.selection("VERTEX", "PartSet/Origin"))
SketchConstraintCoincidence_14 = Sketch_1.setCoincident(SketchLine_1.endPoint(), SketchPoint_1.coordinates())
model.do()
-Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1f-SketchLine_2f-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f-SketchLine_9f-SketchLine_10f-SketchArc_1_2r-SketchArc_2_2r")], model.selection(), "b/2", "b/2")
-Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face_1"))
-SketchProjection_1 = Sketch_2.addProjection(model.selection("VERTEX", "Extrusion_1_1/Generated_Face_3&Extrusion_1_1/Generated_Face_2&Extrusion_1_1/To_Face_1"), False)
+Extrusion_1 = model.addExtrusion(Part_1_doc, [model.selection("FACE", "Sketch_1/Face-SketchLine_1r-SketchLine_2f-SketchArc_2_2r-SketchLine_3f-SketchLine_4f-SketchLine_5f-SketchLine_6f-SketchLine_7f-SketchLine_8f-SketchLine_9f-SketchArc_1_2r-SketchLine_10f")], model.selection(), "b/2", "b/2")
+Sketch_2 = model.addSketch(Part_1_doc, model.selection("FACE", "Extrusion_1_1/To_Face"))
+SketchProjection_1 = Sketch_2.addProjection(model.selection("VERTEX", "[Extrusion_1_1/Generated_Face&Sketch_1/SketchLine_9][Extrusion_1_1/Generated_Face&Sketch_1/SketchArc_1_2][Extrusion_1_1/To_Face]"), False)
SketchPoint_2 = SketchProjection_1.createdFeature()
SketchCircle_1 = Sketch_2.addCircle(-15, 35, 25)
SketchConstraintCoincidence_15 = Sketch_2.setCoincident(SketchCircle_1.center(), SketchPoint_2.result())
SketchConstraintRadius_3 = Sketch_2.setRadius(SketchCircle_1.results()[1], "50/2")
model.do()
-ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Wire-SketchCircle_1_2f")], model.selection(), 0, 13, [model.selection("SOLID", "Extrusion_1_1")])
-Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modfied_4"))
-SketchProjection_2 = Sketch_3.addProjection(model.selection("VERTEX", "ExtrusionCut_1_1/Modfied_2&ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_4"), False)
+ExtrusionCut_1 = model.addExtrusionCut(Part_1_doc, [model.selection("WIRE", "Sketch_2/Face-SketchCircle_1_2f_wire")], model.selection(), 0, 13, [model.selection("SOLID", "Extrusion_1_1")])
+Sketch_3 = model.addSketch(Part_1_doc, model.selection("FACE", "ExtrusionCut_1_1/Modified_Face&ExtrusionCut_1_1/From_Face"))
+SketchProjection_2 = Sketch_3.addProjection(model.selection("VERTEX", "ExtrusionCut_1_1/Generated_Vertex&ExtrusionCut_1_1/From_Face"), False)
SketchPoint_3 = SketchProjection_2.createdFeature()
-SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_3&ExtrusionCut_1_1/Modfied_4"), False)
+SketchProjection_3 = Sketch_3.addProjection(model.selection("EDGE", "([ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9])([Extrusion_1_1/From_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9])2([Extrusion_1_1/From_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2])2([ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9])2"), False)
SketchLine_11 = SketchProjection_3.createdFeature()
SketchArc_3 = Sketch_3.addArc(-15, 35, -15, 46.0103340429751, -17.02045759563166, 24.17663606626138, True)
SketchConstraintCoincidence_16 = Sketch_3.setCoincident(SketchPoint_3.result(), SketchArc_3.center())
SketchConstraintCoincidence_17 = Sketch_3.setCoincident(SketchLine_11.result(), SketchArc_3.startPoint())
-SketchProjection_4 = Sketch_3.addProjection(model.selection("EDGE", "ExtrusionCut_1_1/Modfied_2&ExtrusionCut_1_1/Modfied_4"), False)
+SketchProjection_4 = Sketch_3.addProjection(model.selection("EDGE", "([ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9])([Extrusion_1_1/From_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchLine_9])2([Extrusion_1_1/From_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2])2([ExtrusionCut_1_1/Modified_Face&Extrusion_1_1/To_Face][ExtrusionCut_1_1/Modified_Face&Sketch_1/SketchArc_1_2])2"), False)
SketchArc_4 = SketchProjection_4.createdFeature()
SketchConstraintCoincidence_18 = Sketch_3.setCoincident(SketchArc_3.endPoint(), SketchArc_4.results()[1])
SketchLine_12 = Sketch_3.addLine(-15, 46.0103340429751, -15, 35)
