-// Copyright (C) 2014-20xx CEA/DEN, EDF R&D -->
+// Copyright (C) 2014-2020 CEA/DEN, EDF R&D
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License, or (at your option) any later version.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+//
#include <SketchPlugin_Plugin.h>
#include <SketchPlugin_Sketch.h>
#include <SketchPlugin_Line.h>
#include <SketchPlugin_Point.h>
+#include <SketchPlugin_IntersectionPoint.h>
#include <SketchPlugin_Circle.h>
#include <SketchPlugin_Arc.h>
+#include <SketchPlugin_BSpline.h>
+#include <SketchPlugin_BSplinePeriodic.h>
+#include <SketchPlugin_Projection.h>
+#include <SketchPlugin_ConstraintAngle.h>
#include <SketchPlugin_ConstraintCoincidence.h>
+#include <SketchPlugin_ConstraintCoincidenceInternal.h>
+#include <SketchPlugin_ConstraintCollinear.h>
#include <SketchPlugin_ConstraintDistance.h>
+#include <SketchPlugin_ConstraintDistanceHorizontal.h>
+#include <SketchPlugin_ConstraintDistanceVertical.h>
+#include <SketchPlugin_ConstraintEqual.h>
+#include <SketchPlugin_Fillet.h>
+#include <SketchPlugin_ConstraintHorizontal.h>
#include <SketchPlugin_ConstraintLength.h>
+#include <SketchPlugin_ConstraintMiddle.h>
+#include <SketchPlugin_ConstraintMirror.h>
#include <SketchPlugin_ConstraintParallel.h>
#include <SketchPlugin_ConstraintPerpendicular.h>
#include <SketchPlugin_ConstraintRadius.h>
#include <SketchPlugin_ConstraintRigid.h>
+#include <SketchPlugin_ConstraintTangent.h>
+#include <SketchPlugin_ConstraintVertical.h>
+#include <SketchPlugin_MacroArc.h>
+#include <SketchPlugin_MacroBSpline.h>
+#include <SketchPlugin_MacroCircle.h>
+#include <SketchPlugin_MultiRotation.h>
+#include <SketchPlugin_MultiTranslation.h>
+#include <SketchPlugin_Offset.h>
+#include <SketchPlugin_Trim.h>
+#include <SketchPlugin_Split.h>
#include <SketchPlugin_Validators.h>
-#include <SketchPlugin_ResultValidators.h>
+#include <SketchPlugin_ExternalValidator.h>
+#include <SketchPlugin_Ellipse.h>
+#include <SketchPlugin_MacroEllipse.h>
+#include <SketchPlugin_EllipticArc.h>
+#include <SketchPlugin_MacroEllipticArc.h>
+#include <SketchPlugin_SketchDrawer.h>
+#include <SketchPlugin_SketchCopy.h>
+#include <SketchPlugin_CurveFitting.h>
+
+#include <SketcherPrs_Tools.h>
#include <Events_Loop.h>
#include <GeomDataAPI_Dir.h>
#include <Config_PropManager.h>
#include <memory>
+#include <sstream>
#ifdef _DEBUG
#include <iostream>
#endif
-using namespace std;
+#define SKETCH_ENTITY_COLOR "225,0,0"
+#define SKETCH_EXTERNAL_COLOR "170,0,225"
+#define SKETCH_AUXILIARY_COLOR "0,85,0"
+#define SKETCH_OVERCONSTRAINT_COLOR "255,0,0"
+#define SKETCH_FULLY_CONSTRAINED_COLOR "0,150,0"
+
+//#define SET_PLANES_COLOR_IN_PREFERENCES
// the only created instance of this plugin
static SketchPlugin_Plugin* MY_SKETCH_INSTANCE = new SketchPlugin_Plugin();
SessionPtr aMgr = ModelAPI_Session::get();
ModelAPI_ValidatorsFactory* aFactory = aMgr->validators();
aFactory->registerValidator("SketchPlugin_DistanceAttr",
- new SketchPlugin_DistanceAttrValidator);
- aFactory->registerValidator("SketchPlugin_DifferentObjects",
- new SketchPlugin_DifferentObjectsValidator);
- aFactory->registerValidator("SketchPlugin_ResultPoint", new SketchPlugin_ResultPointValidator);
- aFactory->registerValidator("SketchPlugin_ResultLine", new SketchPlugin_ResultLineValidator);
- aFactory->registerValidator("SketchPlugin_ResultArc", new SketchPlugin_ResultArcValidator);
+ new SketchPlugin_DistanceAttrValidator);
+ aFactory->registerValidator("SketchPlugin_ExternalValidator",
+ new SketchPlugin_ExternalValidator);
+ aFactory->registerValidator("SketchPlugin_TangentAttr",
+ new SketchPlugin_TangentAttrValidator);
+ aFactory->registerValidator("SketchPlugin_PerpendicularAttr",
+ new SketchPlugin_PerpendicularAttrValidator);
+ aFactory->registerValidator("SketchPlugin_NotFixed",
+ new SketchPlugin_NotFixedValidator);
+ aFactory->registerValidator("SketchPlugin_EqualAttr",
+ new SketchPlugin_EqualAttrValidator);
+ aFactory->registerValidator("SketchPlugin_MirrorAttr",
+ new SketchPlugin_MirrorAttrValidator);
+ aFactory->registerValidator("SketchPlugin_CoincidenceAttr",
+ new SketchPlugin_CoincidenceAttrValidator);
+ aFactory->registerValidator("SketchPlugin_CopyValidator",
+ new SketchPlugin_CopyValidator);
+ aFactory->registerValidator("SketchPlugin_SolverErrorValidator",
+ new SketchPlugin_SolverErrorValidator);
+ aFactory->registerValidator("SketchPlugin_FilletVertexValidator",
+ new SketchPlugin_FilletVertexValidator);
+ aFactory->registerValidator("SketchPlugin_SplitValidator",
+ new SketchPlugin_SplitValidator);
+ aFactory->registerValidator("SketchPlugin_TrimValidator",
+ new SketchPlugin_TrimValidator);
+ aFactory->registerValidator("SketchPlugin_MiddlePointAttr",
+ new SketchPlugin_MiddlePointAttrValidator);
+ aFactory->registerValidator("SketchPlugin_ArcTangentPoint",
+ new SketchPlugin_ArcTangentPointValidator);
+ aFactory->registerValidator("SketchPlugin_ArcTransversalPoint",
+ new SketchPlugin_ArcTransversalPointValidator);
+ aFactory->registerValidator("SketchPlugin_IntersectionValidator",
+ new SketchPlugin_IntersectionValidator);
+ aFactory->registerValidator("SketchPlugin_ProjectionValidator",
+ new SketchPlugin_ProjectionValidator);
+ aFactory->registerValidator("SketchPlugin_DifferentReference",
+ new SketchPlugin_DifferentReferenceValidator);
+ aFactory->registerValidator("SketchPlugin_DifferentPointReference",
+ new SketchPlugin_DifferentPointReferenceValidator);
+ aFactory->registerValidator("SketchPlugin_CirclePassedPointValidator",
+ new SketchPlugin_CirclePassedPointValidator);
+ aFactory->registerValidator("SketchPlugin_ThirdPointValidator",
+ new SketchPlugin_ThirdPointValidator);
+ aFactory->registerValidator("SketchPlugin_ArcEndPointValidator",
+ new SketchPlugin_ArcEndPointValidator);
+ aFactory->registerValidator("SketchPlugin_ArcEndPointIntersectionValidator",
+ new SketchPlugin_ArcEndPointIntersectionValidator);
+ aFactory->registerValidator("SketchPlugin_HasNoConstraint", new SketchPlugin_HasNoConstraint);
+ aFactory->registerValidator("SketchPlugin_ReplicationReference",
+ new SketchPlugin_ReplicationReferenceValidator);
+ aFactory->registerValidator("SketchPlugin_SketchFeatureValidator",
+ new SketchPlugin_SketchFeatureValidator);
+ aFactory->registerValidator("SketchPlugin_MultiRotationAngleValidator",
+ new SketchPlugin_MultiRotationAngleValidator);
+ aFactory->registerValidator("SketchPlugin_BSplineValidator",
+ new SketchPlugin_BSplineValidator);
+ aFactory->registerValidator("SketchPlugin_CurveFittingValidator",
+ new SketchPlugin_CurveFittingValidator);
// register this plugin
ModelAPI_Session::get()->registerPlugin(this);
+ Config_PropManager::registerProp("Visualization", "sketch_entity_color",
+ "Sketch entity color",
+ Config_Prop::Color, SKETCH_ENTITY_COLOR);
+
+ Config_PropManager::registerProp("Visualization", "sketch_external_color",
+ "Sketch external entity color",
+ Config_Prop::Color, SKETCH_EXTERNAL_COLOR);
+
+ Config_PropManager::registerProp("Visualization", "sketch_auxiliary_color",
+ "Sketch auxiliary entity color",
+ Config_Prop::Color, SKETCH_AUXILIARY_COLOR);
+
+ Config_PropManager::registerProp("Visualization", "sketch_overconstraint_color",
+ "Sketch overconstraint color",
+ Config_Prop::Color, SKETCH_OVERCONSTRAINT_COLOR);
+
+ Config_PropManager::registerProp("Visualization", "sketch_fully_constrained_color",
+ "Sketch fully constrained color",
+ Config_Prop::Color, SKETCH_FULLY_CONSTRAINED_COLOR);
+
+ Config_PropManager::registerProp("Visualization", "sketch_line_width",
+ "Sketch line width",
+ Config_Prop::IntSpin, "3");
+
// register sketcher properties
- Config_PropManager::registerProp("Sketch planes", "planes_color", "Color", Config_Prop::Color,
- SKETCH_PLANE_COLOR);
- Config_PropManager::registerProp("Sketch planes", "planes_size", "Size", Config_Prop::Double,
- PLANE_SIZE);
- Config_PropManager::registerProp("Sketch planes", "planes_thickness", "Thickness",
- Config_Prop::Integer, SKETCH_WIDTH);
-
- Config_PropManager::registerProp("Visualization", "parallel_color", "Parallel constraint color",
- Config_Prop::Color, PARALLEL_COLOR);
- Config_PropManager::registerProp("Visualization", "perpendicular_color",
- "Perpendicular constraint color", Config_Prop::Color,
- PERPENDICULAR_COLOR);
- Config_PropManager::registerProp("Visualization", "distance_color", "Distance color",
- Config_Prop::Color, DISTANCE_COLOR);
- Config_PropManager::registerProp("Visualization", "length_color", "Length color",
- Config_Prop::Color, LENGTH_COLOR);
- Config_PropManager::registerProp("Visualization", "radius_color", "Radius color",
- Config_Prop::Color, RADIUS_COLOR);
- Config_PropManager::registerProp("Visualization", "fixing_color", "Fixing color",
- Config_Prop::Color, FIXING_COLOR);
+#ifdef SET_PLANES_COLOR_IN_PREFERENCES
+ Config_PropManager::registerProp("Visualization", "yz_plane_color", "YZ plane color",
+ Config_Prop::Color, YZ_PLANE_COLOR);
+ Config_PropManager::registerProp("Visualization", "xz_plane_color", "XZ plane color",
+ Config_Prop::Color, XZ_PLANE_COLOR);
+ Config_PropManager::registerProp("Visualization", "xy_plane_color", "XY plane color",
+ Config_Prop::Color, XY_PLANE_COLOR);
+#endif
+
}
-FeaturePtr SketchPlugin_Plugin::createFeature(string theFeatureID)
+FeaturePtr SketchPlugin_Plugin::createFeature(std::string theFeatureID)
{
if (theFeatureID == SketchPlugin_Sketch::ID()) {
return FeaturePtr(new SketchPlugin_Sketch);
} else if (theFeatureID == SketchPlugin_Point::ID()) {
return FeaturePtr(new SketchPlugin_Point);
+ } else if (theFeatureID == SketchPlugin_IntersectionPoint::ID()) {
+ return FeaturePtr(new SketchPlugin_IntersectionPoint);
} else if (theFeatureID == SketchPlugin_Line::ID()) {
return FeaturePtr(new SketchPlugin_Line);
} else if (theFeatureID == SketchPlugin_Circle::ID()) {
return FeaturePtr(new SketchPlugin_Circle);
} else if (theFeatureID == SketchPlugin_Arc::ID()) {
return FeaturePtr(new SketchPlugin_Arc);
+ } else if (theFeatureID == SketchPlugin_BSpline::ID()) {
+ return FeaturePtr(new SketchPlugin_BSpline);
+ } else if (theFeatureID == SketchPlugin_BSplinePeriodic::ID()) {
+ return FeaturePtr(new SketchPlugin_BSplinePeriodic);
+ } else if (theFeatureID == SketchPlugin_Projection::ID()) {
+ return FeaturePtr(new SketchPlugin_Projection);
} else if (theFeatureID == SketchPlugin_ConstraintCoincidence::ID()) {
return FeaturePtr(new SketchPlugin_ConstraintCoincidence);
+ } else if (theFeatureID == SketchPlugin_ConstraintCoincidenceInternal::ID()) {
+ return FeaturePtr(new SketchPlugin_ConstraintCoincidenceInternal);
+ } else if (theFeatureID == SketchPlugin_ConstraintCollinear::ID()) {
+ return FeaturePtr(new SketchPlugin_ConstraintCollinear);
} else if (theFeatureID == SketchPlugin_ConstraintDistance::ID()) {
return FeaturePtr(new SketchPlugin_ConstraintDistance);
+ } else if (theFeatureID == SketchPlugin_ConstraintDistanceHorizontal::ID()) {
+ return FeaturePtr(new SketchPlugin_ConstraintDistanceHorizontal);
+ } else if (theFeatureID == SketchPlugin_ConstraintDistanceVertical::ID()) {
+ return FeaturePtr(new SketchPlugin_ConstraintDistanceVertical);
} else if (theFeatureID == SketchPlugin_ConstraintLength::ID()) {
return FeaturePtr(new SketchPlugin_ConstraintLength);
} else if (theFeatureID == SketchPlugin_ConstraintParallel::ID()) {
return FeaturePtr(new SketchPlugin_ConstraintRadius);
} else if (theFeatureID == SketchPlugin_ConstraintRigid::ID()) {
return FeaturePtr(new SketchPlugin_ConstraintRigid);
+ } else if (theFeatureID == SketchPlugin_ConstraintHorizontal::ID()) {
+ return FeaturePtr(new SketchPlugin_ConstraintHorizontal);
+ } else if (theFeatureID == SketchPlugin_ConstraintVertical::ID()) {
+ return FeaturePtr(new SketchPlugin_ConstraintVertical);
+ } else if (theFeatureID == SketchPlugin_ConstraintEqual::ID()) {
+ return FeaturePtr(new SketchPlugin_ConstraintEqual);
+ } else if (theFeatureID == SketchPlugin_ConstraintTangent::ID()) {
+ return FeaturePtr(new SketchPlugin_ConstraintTangent);
+ } else if (theFeatureID == SketchPlugin_ConstraintMiddle::ID()) {
+ return FeaturePtr(new SketchPlugin_ConstraintMiddle);
+ } else if (theFeatureID == SketchPlugin_ConstraintMirror::ID()) {
+ return FeaturePtr(new SketchPlugin_ConstraintMirror);
+ } else if (theFeatureID == SketchPlugin_Fillet::ID()) {
+ return FeaturePtr(new SketchPlugin_Fillet);
+ } else if (theFeatureID == SketchPlugin_MultiTranslation::ID()) {
+ return FeaturePtr(new SketchPlugin_MultiTranslation);
+ } else if (theFeatureID == SketchPlugin_MultiRotation::ID()) {
+ return FeaturePtr(new SketchPlugin_MultiRotation);
+ } else if (theFeatureID == SketchPlugin_ConstraintAngle::ID()) {
+ return FeaturePtr(new SketchPlugin_ConstraintAngle);
+ } else if (theFeatureID == SketchPlugin_Split::ID()) {
+ return FeaturePtr(new SketchPlugin_Split);
+ } else if (theFeatureID == SketchPlugin_Trim::ID()) {
+ return FeaturePtr(new SketchPlugin_Trim);
+ } else if (theFeatureID == SketchPlugin_MacroArc::ID()) {
+ return FeaturePtr(new SketchPlugin_MacroArc);
+ } else if (theFeatureID == SketchPlugin_MacroBSpline::ID()) {
+ return FeaturePtr(new SketchPlugin_MacroBSpline);
+ } else if (theFeatureID == SketchPlugin_MacroBSplinePeriodic::ID()) {
+ return FeaturePtr(new SketchPlugin_MacroBSplinePeriodic);
+ } else if (theFeatureID == SketchPlugin_MacroCircle::ID()) {
+ return FeaturePtr(new SketchPlugin_MacroCircle);
+ } else if (theFeatureID == SketchPlugin_Ellipse::ID()) {
+ return FeaturePtr(new SketchPlugin_Ellipse);
+ } else if (theFeatureID == SketchPlugin_MacroEllipse::ID()) {
+ return FeaturePtr(new SketchPlugin_MacroEllipse);
+ } else if (theFeatureID == SketchPlugin_EllipticArc::ID()) {
+ return FeaturePtr(new SketchPlugin_EllipticArc);
+ } else if (theFeatureID == SketchPlugin_MacroEllipticArc::ID()) {
+ return FeaturePtr(new SketchPlugin_MacroEllipticArc);
+ } else if (theFeatureID == SketchPlugin_CurveFitting::ID()) {
+ return FeaturePtr(new SketchPlugin_CurveFitting);
+ } else if (theFeatureID == SketchPlugin_SketchDrawer::ID()) {
+ return FeaturePtr(new SketchPlugin_SketchDrawer);
+ } else if (theFeatureID == SketchPlugin_SketchCopy::ID()) {
+ return FeaturePtr(new SketchPlugin_SketchCopy);
+ } else if (theFeatureID == SketchPlugin_Offset::ID()) {
+ return FeaturePtr(new SketchPlugin_Offset);
}
// feature of such kind is not found
return FeaturePtr();
}
+// LCOV_EXCL_START
void SketchPlugin_Plugin::processEvent(const std::shared_ptr<Events_Message>& theMessage)
{
const Events_ID kRequestEvent =
::getFeaturesState(const std::shared_ptr<ModelAPI_Feature>& theFeature) const
{
const Events_ID kResponseEvent = Events_Loop::loop()->eventByName(EVENT_FEATURE_STATE_RESPONSE);
- std::shared_ptr<ModelAPI_FeatureStateMessage> aMsg =
- std::make_shared<ModelAPI_FeatureStateMessage>(kResponseEvent, this);
+ std::shared_ptr<ModelAPI_FeatureStateMessage> aMsg(
+ new ModelAPI_FeatureStateMessage(kResponseEvent, this));
bool aHasSketchPlane = false;
std::shared_ptr<SketchPlugin_Sketch> aSketchFeature =
std::dynamic_pointer_cast<SketchPlugin_Sketch>(theFeature);
if (aSketchFeature.get()) {
std::shared_ptr<ModelAPI_Data> aData = aSketchFeature->data();
- std::shared_ptr<GeomDataAPI_Dir> aNormal =
- std::dynamic_pointer_cast<GeomDataAPI_Dir>(aData->attribute(SketchPlugin_Sketch::NORM_ID()));
- aHasSketchPlane = aNormal && !(aNormal->x() == 0 && aNormal->y() == 0 && aNormal->z() == 0);
-
- aMsg->setState(SketchPlugin_Point::ID(), aHasSketchPlane);
- aMsg->setState(SketchPlugin_Line::ID(), aHasSketchPlane);
- aMsg->setState(SketchPlugin_Circle::ID(), aHasSketchPlane);
- aMsg->setState(SketchPlugin_Arc::ID(), aHasSketchPlane);
- aMsg->setState(SketchPlugin_ConstraintCoincidence::ID(), aHasSketchPlane);
- aMsg->setState(SketchPlugin_ConstraintDistance::ID(), aHasSketchPlane);
- aMsg->setState(SketchPlugin_ConstraintLength::ID(), aHasSketchPlane);
- aMsg->setState(SketchPlugin_ConstraintParallel::ID(), aHasSketchPlane);
- aMsg->setState(SketchPlugin_ConstraintPerpendicular::ID(), aHasSketchPlane);
- aMsg->setState(SketchPlugin_ConstraintRadius::ID(), aHasSketchPlane);
- aMsg->setState(SketchPlugin_ConstraintRigid::ID(), aHasSketchPlane);
+ if (aData) {
+ std::shared_ptr<GeomDataAPI_Dir> aNormal =
+ std::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ aData->attribute(SketchPlugin_Sketch::NORM_ID()));
+ // it is important to check whether the normal attribute is initialized
+ // because it is possible that normal values are filled when the plane is checked on validity
+ aHasSketchPlane = aNormal && aNormal->isInitialized() &&
+ !(aNormal->x() == 0 && aNormal->y() == 0 && aNormal->z() == 0);
+
+ aMsg->setState(SketchPlugin_Point::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_IntersectionPoint::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_Line::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_Circle::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_Arc::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_BSpline::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_BSplinePeriodic::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_Ellipse::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_EllipticArc::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_Projection::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_ConstraintCoincidence::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_ConstraintCoincidenceInternal::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_ConstraintCollinear::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_ConstraintDistance::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_ConstraintLength::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_ConstraintParallel::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_ConstraintPerpendicular::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_ConstraintRadius::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_ConstraintRigid::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_ConstraintHorizontal::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_ConstraintVertical::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_ConstraintEqual::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_ConstraintTangent::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_ConstraintMiddle::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_ConstraintMirror::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_Fillet::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_ConstraintAngle::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_MultiRotation::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_MultiTranslation::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_Split::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_Trim::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_MacroArc::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_MacroBSpline::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_MacroBSplinePeriodic::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_MacroCircle::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_MacroEllipse::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_MacroEllipticArc::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_ConstraintDistanceHorizontal::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_ConstraintDistanceVertical::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_CurveFitting::ID(), aHasSketchPlane);
+ aMsg->setState(SketchPlugin_Offset::ID(), aHasSketchPlane);
+ // SketchRectangle is a python feature, so its ID is passed just as a string
+ aMsg->setState("SketchRectangle", aHasSketchPlane);
+ }
}
return aMsg;
}
+// LCOV_EXCL_STOP
