-// Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+// Copyright (C) 2014-2022 CEA/DEN, EDF R&D
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
-// See http://www.salome-platform.org/ or
-// email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
#include "SketchPlugin_MacroArc.h"
#include "SketchPlugin_Arc.h"
+#include "SketchPlugin_ConstraintPerpendicular.h"
#include "SketchPlugin_ConstraintTangent.h"
#include "SketchPlugin_Sketch.h"
#include "SketchPlugin_Tools.h"
data()->addAttribute(TANGENT_POINT_ID(), ModelAPI_AttributeRefAttr::typeId());
data()->addAttribute(END_POINT_3_ID(), GeomDataAPI_Point2D::typeId());
+ data()->addAttribute(TRANSVERSAL_POINT_ID(), ModelAPI_AttributeRefAttr::typeId());
+ data()->addAttribute(END_POINT_4_ID(), GeomDataAPI_Point2D::typeId());
+
data()->addAttribute(REVERSED_ID(), ModelAPI_AttributeBoolean::typeId());
data()->addAttribute(RADIUS_ID(), ModelAPI_AttributeDouble::typeId());
SketchPlugin_Tools::resetAttribute(this, PASSED_POINT_REF_ID());
SketchPlugin_Tools::resetAttribute(this, TANGENT_POINT_ID());
SketchPlugin_Tools::resetAttribute(this, END_POINT_3_ID());
+ SketchPlugin_Tools::resetAttribute(this, TRANSVERSAL_POINT_ID());
+ SketchPlugin_Tools::resetAttribute(this, END_POINT_4_ID());
SketchPlugin_Tools::resetAttribute(this, REVERSED_ID());
SketchPlugin_Tools::resetAttribute(this, RADIUS_ID());
SketchPlugin_Tools::resetAttribute(this, ANGLE_ID());
else if(anArcType == ARC_TYPE_BY_THREE_POINTS())
fillByThreePassedPoints();
else if(anArcType == ARC_TYPE_BY_TANGENT_EDGE())
- fillByTangentEdge();
+ fillByEdge(false);
+ else if (anArcType == ARC_TYPE_BY_TRANSVERSAL_LINE())
+ fillByEdge(true);
double aRadius = 0;
double anAngle = 0;
anAIS.reset(new GeomAPI_AISObject());
}
anAIS->createShape(aCompound);
+ SketchPlugin_Tools::customizeFeaturePrs(anAIS, boolean(AUXILIARY_ID())->value());
return anAIS;
}
// Create constraints.
std::string anArcType = string(ARC_TYPE())->value();
if(anArcType == ARC_TYPE_BY_CENTER_AND_POINTS()) {
- SketchPlugin_Tools::createConstraint(this,
+ SketchPlugin_Tools::createCoincidenceOrTangency(this,
CENTER_POINT_REF_ID(),
anArcFeature->attribute(SketchPlugin_Arc::CENTER_ID()),
ObjectPtr(),
false);
- SketchPlugin_Tools::createConstraint(this,
+ SketchPlugin_Tools::createCoincidenceOrTangency(this,
START_POINT_REF_ID(),
anArcFeature->attribute(SketchPlugin_Arc::START_ID()),
ObjectPtr(),
false);
- SketchPlugin_Tools::createConstraint(this,
+ SketchPlugin_Tools::createCoincidenceOrTangency(this,
END_POINT_REF_ID(),
anArcFeature->attribute(SketchPlugin_Arc::END_ID()),
ObjectPtr(),
false);
} else if(anArcType == ARC_TYPE_BY_THREE_POINTS()) {
- SketchPlugin_Tools::createConstraint(this,
+ SketchPlugin_Tools::createCoincidenceOrTangency(this,
START_POINT_REF_ID(),
anArcFeature->attribute(SketchPlugin_Arc::START_ID()),
ObjectPtr(),
false);
- SketchPlugin_Tools::createConstraint(this,
+ SketchPlugin_Tools::createCoincidenceOrTangency(this,
END_POINT_REF_ID(),
anArcFeature->attribute(SketchPlugin_Arc::END_ID()),
ObjectPtr(),
false);
- SketchPlugin_Tools::createConstraint(this,
+ SketchPlugin_Tools::createCoincidenceOrTangency(this,
PASSED_POINT_REF_ID(),
AttributePtr(),
anArcFeature->lastResult(),
true);
- } else if(anArcType == ARC_TYPE_BY_TANGENT_EDGE()) {
- // constraints for tangent arc
- SketchPlugin_Tools::createConstraint(this,
- TANGENT_POINT_ID(),
+ } else {
+ // coincident with connection point
+ const std::string& aPointAttr = anArcType == ARC_TYPE_BY_TANGENT_EDGE() ?
+ TANGENT_POINT_ID() : TRANSVERSAL_POINT_ID();
+ SketchPlugin_Tools::createCoincidenceOrTangency(this,
+ aPointAttr,
anArcFeature->attribute(SketchPlugin_Arc::START_ID()),
ObjectPtr(),
false);
- FeaturePtr aTangent = sketch()->addFeature(SketchPlugin_ConstraintTangent::ID());
- AttributeRefAttrPtr aRefAttrA = aTangent->refattr(SketchPlugin_Constraint::ENTITY_A());
- AttributeRefAttrPtr aTgPntRefAttr = refattr(TANGENT_POINT_ID());
+ // tangent or perpendicular constraint
+ FeaturePtr aStartPointConstraint;
+ if (anArcType == ARC_TYPE_BY_TANGENT_EDGE())
+ aStartPointConstraint = sketch()->addFeature(SketchPlugin_ConstraintTangent::ID());
+ else
+ aStartPointConstraint = sketch()->addFeature(SketchPlugin_ConstraintPerpendicular::ID());
+ // setting attributes of the start point constraint
+ AttributeRefAttrPtr aRefAttrA =
+ aStartPointConstraint->refattr(SketchPlugin_Constraint::ENTITY_A());
+ AttributeRefAttrPtr aTgPntRefAttr = refattr(aPointAttr);
FeaturePtr aTgFeature = ModelAPI_Feature::feature(aTgPntRefAttr->attr()->owner());
aRefAttrA->setObject(aTgFeature->lastResult());
- AttributeRefAttrPtr aRefAttrB = aTangent->refattr(SketchPlugin_Constraint::ENTITY_B());
+ AttributeRefAttrPtr aRefAttrB =
+ aStartPointConstraint->refattr(SketchPlugin_Constraint::ENTITY_B());
aRefAttrB->setObject(anArcFeature->lastResult());
// constraint for end point
- SketchPlugin_Tools::createConstraint(this,
+ SketchPlugin_Tools::createCoincidenceOrTangency(this,
END_POINT_REF_ID(),
anArcFeature->attribute(SketchPlugin_Arc::END_ID()),
ObjectPtr(),
Events_Loop::loop()->send(aMessage);
}
+// LCOV_EXCL_START
std::string SketchPlugin_MacroArc::processEvent(const std::shared_ptr<Events_Message>& theMessage)
{
std::string aFilledAttributeName;
aFilledAttributeName = ARC_TYPE();
if(anArcType == ARC_TYPE_BY_TANGENT_EDGE()) {
aFilledAttributeName = TANGENT_POINT_ID();
- AttributeRefAttrPtr aRefAttr = std::dynamic_pointer_cast<ModelAPI_AttributeRefAttr>(
- attribute(aFilledAttributeName));
- FeaturePtr aCreatedFeature = aReentrantMessage->createdFeature();
+ AttributeRefAttrPtr aRefAttr = refattr(aFilledAttributeName);
aRefAttr->setAttr(aCreatedFeature->attribute(SketchPlugin_Arc::END_ID()));
}
+ else if (anArcType == ARC_TYPE_BY_TRANSVERSAL_LINE()) {
+ AttributeRefAttrPtr aRefAttr = refattr(TRANSVERSAL_POINT_ID());
+ AttributePtr anAttribute = aReentrantMessage->selectedAttribute();
+ if (anAttribute) {
+ aRefAttr->setAttr(anAttribute);
+ aFilledAttributeName = TRANSVERSAL_POINT_ID();
+ }
+ }
else {
ObjectPtr anObject = aReentrantMessage->selectedObject();
AttributePtr anAttribute = aReentrantMessage->selectedAttribute();
if (aRefAttr.get()) {
if (anAttribute.get()) {
if (!anAttribute->owner().get() || !anAttribute->owner()->data()->isValid()) {
- FeaturePtr aCreatedFeature = aReentrantMessage->createdFeature();
if (aCreatedFeature.get()) {
std::string anID = anAttribute->id();
std::string anArcID;
aRefAttr->setAttr(anAttribute);
}
else if (anObject.get()) {
- // if presentation of previous reentrant macro arc is used, the object is invalid,
- // we should use result of previous feature of the message(Arc)
- if (!anObject->data()->isValid()) {
- FeaturePtr aCreatedFeature = aReentrantMessage->createdFeature();
- if (aCreatedFeature.get())
- anObject = aCreatedFeature->lastResult();
- }
- aRefAttr->setObject(anObject);
+ // if attribute is NULL, only object is defined, it should be processed outside
+ // the feature because it might be an external feature, that will be
+ // removed/created again after restart operation
+ // #2468 - Crash when sketching circles successively on a repetition
+ aFilledAttributeName = ARC_TYPE();
}
}
}
}
return aFilledAttributeName;
}
+// LCOV_EXCL_STOP
FeaturePtr SketchPlugin_MacroArc::createArcFeature()
{
return;
GeomAPI_Circ2d aCircleForArc(myCenter, myStart);
+ // avoid degerated arc, when the center and the start points are equal
+ if (!aCircleForArc.implPtr<void*>())
+ return;
bool aWasBlocked = data()->blockSendAttributeUpdated(true);
// check the end point is referred to another feature
myParamBefore = aEndParam;
}
-void SketchPlugin_MacroArc::fillByTangentEdge()
+void SketchPlugin_MacroArc::fillByEdge(bool theTransversal)
{
- AttributeRefAttrPtr aTangentAttr = refattr(TANGENT_POINT_ID());
+ const std::string& aStartPoint = theTransversal ? TRANSVERSAL_POINT_ID() : TANGENT_POINT_ID();
+ const std::string& aEndPoint = theTransversal ? END_POINT_4_ID() : END_POINT_3_ID();
+
+ AttributeRefAttrPtr aTangentAttr = refattr(aStartPoint);
if (!aTangentAttr->isInitialized())
return;
- AttributePoint2DPtr aTangentPointAttr =
+ AttributePoint2DPtr aConnectionPointAttr =
std::dynamic_pointer_cast<GeomDataAPI_Point2D>(aTangentAttr->attr());
- if (!aTangentPointAttr->isInitialized())
+ if (!aConnectionPointAttr->isInitialized())
return;
AttributePoint2DPtr anEndPointAttr =
- std::dynamic_pointer_cast<GeomDataAPI_Point2D>(attribute(END_POINT_3_ID()));
+ std::dynamic_pointer_cast<GeomDataAPI_Point2D>(attribute(aEndPoint));
if (!anEndPointAttr->isInitialized())
return;
- myStart = aTangentPointAttr->pnt();
+ myStart = aConnectionPointAttr->pnt();
myEnd = anEndPointAttr->pnt();
if (myStart->isEqual(myEnd))
return;
// obtain a shape the tangent point belongs to
- FeaturePtr aTangentFeature = ModelAPI_Feature::feature(aTangentPointAttr->owner());
- std::shared_ptr<GeomAPI_Shape> aTangentShape = aTangentFeature->lastResult()->shape();
+ FeaturePtr aConnectedFeature = ModelAPI_Feature::feature(aConnectionPointAttr->owner());
+ std::shared_ptr<GeomAPI_Shape> aTangentShape = aConnectedFeature->lastResult()->shape();
GeomAlgoAPI_Circ2dBuilder aCircBuilder(SketchPlugin_Sketch::plane(sketch()));
aCircBuilder.addPassingPoint(myStart);
aCircBuilder.addPassingPoint(myEnd);
- aCircBuilder.addTangentCurve(aTangentShape);
+ if (theTransversal)
+ aCircBuilder.setTransversalLine(aTangentShape);
+ else
+ aCircBuilder.addTangentCurve(aTangentShape);
std::shared_ptr<GeomAPI_Circ2d> aCircle = aCircBuilder.circle();
if (!aCircle)
