-## Copyright (C) 2014-2017 CEA/DEN, EDF R&D
-##
-## This library is free software; you can redistribute it and/or
-## modify it under the terms of the GNU Lesser General Public
-## License as published by the Free Software Foundation; either
-## version 2.1 of the License, or (at your option) any later version.
-##
-## This library is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-## Lesser General Public License for more details.
-##
-## You should have received a copy of the GNU Lesser General Public
-## License along with this library; if not, write to the Free Software
-## Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-##
-## See http:##www.salome-platform.org/ or
-## email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
-##
+# Copyright (C) 2014-2024 CEA, EDF
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of the GNU Lesser General Public
+# License as published by the Free Software Foundation; either
+# version 2.1 of the License, or (at your option) any later version.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+#
+import math
import unittest
import ModelAPI
import SketchAPI
+from salome.shaper import geom
+from salome.shaper import model
+
class SketchTestCase(unittest.TestCase):
def setUp(self):
+ model.begin()
self.session = ModelAPI.ModelAPI_Session.get()
- self.doc = self.session.moduleDocument()
+ aPartSet = self.session.moduleDocument()
+ self.doc = model.addPart(aPartSet).document()
+ model.addCylinder(self.doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 5, 10)
+ model.addCylinder(self.doc, model.selection("VERTEX", "PartSet/Origin"), model.selection("EDGE", "PartSet/OZ"), 10, 10, 90)
+ self.sketch = model.addSketch(self.doc, model.defaultPlane("XOY"))
def tearDown(self):
+ model.end()
+ assert(model.checkPythonDump())
self.session.closeAll()
-# TODO(spo): add tests.
+ def checkPoint(self, thePoint, theReference):
+ self.assertAlmostEqual(thePoint.x(), theReference.x(), 6)
+ self.assertAlmostEqual(thePoint.y(), theReference.y(), 6)
+
+ def test_circle_by_point(self):
+ """ Test 1. Create point by GeomAPI_Pnt and circle coincident by the center
+ """
+ point = geom.Pnt2d(10., 10.)
+ aPoint = self.sketch.addPoint(point)
+ aCircle = self.sketch.addCircle(point, 10.)
+ aCoincidence = self.sketch.setCoincident(aPoint.coordinates(), aCircle.center())
+ model.do()
+ self.checkPoint(aPoint.coordinates(), point)
+ self.checkPoint(aCircle.center(), point)
+
+ def test_circle_by_external(self):
+ """ Test 2. Create point and circle by external features
+ """
+ aPoint = self.sketch.addPoint("PartSet/Origin")
+ aCircle = self.sketch.addCircle("[Cylinder_1_1/Face_1][Cylinder_1_1/Face_3]")
+ model.do()
+ point = geom.Pnt2d(0., 0.)
+ self.checkPoint(aPoint.coordinates(), point)
+ self.checkPoint(aCircle.center(), point)
+
+ def test_circle_center_passed(self):
+ """ Test 3. Create circle by center and passed point
+ """
+ aCenter = geom.Pnt2d(10., 10.)
+ aPassed = geom.Pnt2d(20., 30.)
+
+ self.sketch.addCircle(aCenter.x(), aCenter.y(), aPassed.x(), aPassed.y())
+ model.do()
+ aCircle1 = SketchAPI.SketchAPI_Circle(model.lastSubFeature(self.sketch, "SketchCircle"))
+
+ self.sketch.addCircle(aCenter, aPassed)
+ model.do()
+ aCircle2 = SketchAPI.SketchAPI_Circle(model.lastSubFeature(self.sketch, "SketchCircle"))
+
+ aRadius = math.sqrt((aCenter.x()-aPassed.x())**2 + (aCenter.y()-aPassed.y())**2)
+ self.checkPoint(aCircle1.center(), aCenter)
+ self.assertAlmostEqual(aCircle1.radius().value(), aRadius, 6)
+ self.checkPoint(aCircle2.center(), aCenter)
+ self.assertAlmostEqual(aCircle2.radius().value(), aRadius, 6)
+
+ def test_circle_by_three_points(self):
+ """ Test 4. Create circle by three passed points
+ """
+ aCenter = geom.Pnt2d(10., 10.)
+ aRadius = 5.
+
+ self.sketch.addCircle(aCenter.x() - aRadius, aCenter.y(), aCenter.x() + aRadius, aCenter.y(), aCenter.x(), aCenter.y() + aRadius)
+ model.do()
+ aCircle = SketchAPI.SketchAPI_Circle(model.lastSubFeature(self.sketch, "SketchCircle"))
+
+ self.checkPoint(aCircle.center(), aCenter)
+ self.assertAlmostEqual(aCircle.radius().value(), aRadius, 6)
+
+ def test_arc_by_three_points(self):
+ """ Test 5. Create arc by three passed points
+ """
+ aCenter = geom.Pnt2d(10., 10.)
+ aRadius = 5.
+
+ aPoint1 = geom.Pnt2d(aCenter.x() - aRadius, aCenter.y())
+ aPoint2 = geom.Pnt2d(aCenter.x() + aRadius, aCenter.y())
+ aPoint3 = geom.Pnt2d(aCenter.x(), aCenter.y() + aRadius)
+
+ self.sketch.addArc(aPoint1.x(), aPoint1.y(), aPoint2.x(), aPoint2.y(), aPoint3.x(), aPoint3.y())
+ model.do()
+ anArc1 = SketchAPI.SketchAPI_Arc(model.lastSubFeature(self.sketch, "SketchArc"))
+
+ self.checkPoint(anArc1.center(), aCenter)
+ self.assertAlmostEqual(anArc1.radius().value(), aRadius, 6)
+
+ self.sketch.addArc(aPoint1, aPoint2, aPoint3)
+ model.do()
+ anArc2 = SketchAPI.SketchAPI_Arc(model.lastSubFeature(self.sketch, "SketchArc"))
+
+ self.checkPoint(anArc2.center(), aCenter)
+ self.assertAlmostEqual(anArc2.radius().value(), aRadius, 6)
+
+ def test_arc_by_tangent_point(self):
+ """ Test 6. Create arc tangent to a line
+ """
+ aTgPnt = geom.Pnt2d(10., 0.)
+ aRadius = 5.
+
+ aLine = self.sketch.addLine(0., 0., aTgPnt.x(), aTgPnt.y())
+ model.do()
+
+ aPassed = geom.Pnt2d(aTgPnt.x(), aTgPnt.y() + 2. * aRadius)
+ self.sketch.addArc(aLine.endPoint(), aPassed, False)
+ model.do()
+ anArc = SketchAPI.SketchAPI_Arc(model.lastSubFeature(self.sketch, "SketchArc"))
+
+ aCenter = geom.Pnt2d(aTgPnt.x(), aTgPnt.y() + aRadius)
+ self.checkPoint(anArc.center(), aCenter)
+ self.assertAlmostEqual(anArc.radius().value(), aRadius, 6)
+
+ def test_arc_by_external(self):
+ """ Test 7. Create arc by external feature
+ """
+ anArc = self.sketch.addArc(model.selection("EDGE", "[Cylinder_2_1/Face_1][Cylinder_2_1/Face_3]"))
+ model.do()
+ point = geom.Pnt2d(0., 0.)
+ self.checkPoint(anArc.center(), point)
+ self.assertAlmostEqual(anArc.radius().value(), 10, 6)
+
+ def test_arc_by_name(self):
+ """ Test 8. Create arc by external feature
+ """
+ anArc = self.sketch.addArc("[Cylinder_2_1/Face_1][Cylinder_2_1/Face_3]")
+ model.do()
+ point = geom.Pnt2d(0., 0.)
+ self.checkPoint(anArc.center(), point)
+ self.assertAlmostEqual(anArc.radius().value(), 10, 6)
+
+ def test_point_by_intersection(self):
+ """ Test 9. Create point as intersection with external edge given by a name
+ """
+ self.sketch.addIntersectionPoint("[Cylinder_2_1/Face_1][Cylinder_2_1/Face_4]")
+ model.do()
+ aPoint = SketchAPI.SketchAPI_Point(model.lastSubFeature(self.sketch, "SketchPoint"))
+
+ point = geom.Pnt2d(10., 0.)
+ self.checkPoint(aPoint.coordinates(), point)
+
+ def test_arc_by_projection(self):
+ """ Test 10. Create arc by projection of external feature
+ """
+ self.sketch.addProjection(model.selection("EDGE", "[Cylinder_2_1/Face_1][Cylinder_2_1/Face_3]"))
+ model.do()
+ anArc = SketchAPI.SketchAPI_Arc(model.lastSubFeature(self.sketch, "SketchArc"))
+
+ point = geom.Pnt2d(0., 0.)
+ self.checkPoint(anArc.center(), point)
+ self.assertAlmostEqual(anArc.radius().value(), 10, 6)
+
if __name__ == "__main__":
- unittest.main()
+ test_program = unittest.main(exit=False)
+ assert test_program.result.wasSuccessful(), "Test failed"