-// Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+// Copyright (C) 2014-2020 CEA/DEN, EDF R&D
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
#include <SketchPlugin_ConstraintPerpendicular.h>
#include <SketchPlugin_ConstraintRadius.h>
#include <SketchPlugin_ConstraintRigid.h>
+#include <SketchPlugin_CurveFitting.h>
#include <SketchPlugin_Trim.h>
#include <SketchPlugin_Split.h>
#include <SketchPlugin_ConstraintTangent.h>
#include <SketchPlugin_ConstraintVertical.h>
+#include <SketchPlugin_MacroBSpline.h>
+#include <SketchPlugin_SketchCopy.h>
+#include <SketchPlugin_Offset.h>
#include <SketcherPrs_Tools.h>
//--------------------------------------------------------------------------------------
#include <ModelAPI_Events.h>
#include <ModelHighAPI_Tools.h>
//--------------------------------------------------------------------------------------
#include "SketchAPI_Arc.h"
+#include "SketchAPI_BSpline.h"
#include "SketchAPI_Circle.h"
#include "SketchAPI_Ellipse.h"
+#include "SketchAPI_EllipticArc.h"
#include "SketchAPI_IntersectionPoint.h"
#include "SketchAPI_Line.h"
#include "SketchAPI_MacroArc.h"
#include "SketchAPI_MacroCircle.h"
#include "SketchAPI_MacroEllipse.h"
+#include "SketchAPI_MacroEllipticArc.h"
#include "SketchAPI_Mirror.h"
+#include "SketchAPI_Offset.h"
#include "SketchAPI_Point.h"
#include "SketchAPI_Projection.h"
#include "SketchAPI_Rectangle.h"
#include <GeomAPI_ShapeExplorer.h>
#include <GeomAPI_XY.h>
#include <GeomAlgoAPI_SketchBuilder.h>
+
+#include <algorithm>
#include <cmath>
//--------------------------------------------------------------------------------------
SketchAPI_Sketch::SketchAPI_Sketch(
}
SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
- const std::string & theExternalName)
+ const std::wstring & theExternalName)
{
std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
return SketchPtr(
return SketchPtr(new SketchAPI_Sketch(aFeature, thePlaneObject));
}
+//--------------------------------------------------------------------------------------
+SketchPtr copySketch(const std::shared_ptr<ModelAPI_Document> & thePart,
+ const SketchPtr & theSketch)
+{
+ FeaturePtr aCopyer = thePart->addFeature(SketchPlugin_SketchCopy::ID());
+ aCopyer->reference(SketchPlugin_SketchCopy::BASE_ID())->setValue(theSketch->feature());
+ aCopyer->execute();
+
+ FeaturePtr aNewSketch = thePart->nextFeature(aCopyer);
+
+ // perform removing the macro-feature
+ thePart->removeFeature(aCopyer);
+ apply();
+
+ return SketchPtr(new SketchAPI_Sketch(aNewSketch));
+}
+
//--------------------------------------------------------------------------------------
std::list< std::shared_ptr<SketchAPI_Point> > SketchAPI_Sketch::getFreePoints()
compositeFeature()->addFeature(SketchPlugin_Point::ID());
return PointPtr(new SketchAPI_Point(aFeature, theExternal));
}
-std::shared_ptr<SketchAPI_Point> SketchAPI_Sketch::addPoint(const std::string & theExternalName)
+std::shared_ptr<SketchAPI_Point> SketchAPI_Sketch::addPoint(const std::wstring & theExternalName)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_Point::ID());
return anIntersection;
}
std::shared_ptr<SketchAPI_IntersectionPoint> SketchAPI_Sketch::addIntersectionPoint(
- const std::string & theExternalName,
+ const std::wstring & theExternalName,
bool theKeepResult)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_Line::ID());
return LinePtr(new SketchAPI_Line(aFeature, theExternal));
}
-std::shared_ptr<SketchAPI_Line> SketchAPI_Sketch::addLine(const std::string & theExternalName)
+std::shared_ptr<SketchAPI_Line> SketchAPI_Sketch::addLine(const std::wstring & theExternalName)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_Line::ID());
return RectanglePtr(new SketchAPI_Rectangle(aFeature, theStartPoint, theEndPoint));
}
+std::shared_ptr<SketchAPI_Rectangle> SketchAPI_Sketch::addRectangle(
+ double theX1, double theY1, double theX2, double theY2, bool isFirstPointCenter)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchAPI_Rectangle::ID());
+ return RectanglePtr(new SketchAPI_Rectangle(aFeature, theX1, theY1,
+ theX2, theY2, isFirstPointCenter));
+}
+std::shared_ptr<SketchAPI_Rectangle> SketchAPI_Sketch::addRectangle(
+ const std::shared_ptr<GeomAPI_Pnt2d> & theFirstPoint,
+ const std::shared_ptr<GeomAPI_Pnt2d> & theEndPoint, bool isFirstPointCenter)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchAPI_Rectangle::ID());
+ return RectanglePtr(new SketchAPI_Rectangle(aFeature, theFirstPoint, theEndPoint,
+ isFirstPointCenter));
+}
+
+std::shared_ptr<SketchAPI_Rectangle> SketchAPI_Sketch::addRectangleCentered(
+ double theX1, double theY1, double theX2, double theY2)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchAPI_Rectangle::ID());
+ return RectanglePtr(new SketchAPI_Rectangle(aFeature, theX1, theY1, theX2, theY2, true));
+}
+std::shared_ptr<SketchAPI_Rectangle> SketchAPI_Sketch::addRectangleCentered(
+ const std::shared_ptr<GeomAPI_Pnt2d> & theFirstPoint,
+ const std::shared_ptr<GeomAPI_Pnt2d> & theEndPoint)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchAPI_Rectangle::ID());
+ return RectanglePtr(new SketchAPI_Rectangle(aFeature, theFirstPoint, theEndPoint, true));
+}
+
//--------------------------------------------------------------------------------------
std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(double theCenterX,
double theCenterY,
return CirclePtr(new SketchAPI_Circle(aFeature, theExternal));
}
-std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(const std::string & theExternalName)
+std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(const std::wstring & theExternalName)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_Circle::ID());
return ArcPtr(new SketchAPI_Arc(aFeature, theExternal));
}
-std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(const std::string & theExternalName)
+std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(const std::wstring & theExternalName)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_Arc::ID());
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_MacroEllipse::ID());
return MacroEllipsePtr(new SketchAPI_MacroEllipse(aFeature,
- thePoint1X, thePoint1Y, thePoint2X, thePoint1Y, thePassedX, thePassedY, isPoint1Center));
+ thePoint1X, thePoint1Y, thePoint2X, thePoint2Y, thePassedX, thePassedY, isPoint1Center));
}
std::shared_ptr<SketchAPI_MacroEllipse> SketchAPI_Sketch::addEllipse(
- const std::pair<std::shared_ptr<GeomAPI_Pnt2d>, ModelHighAPI_RefAttr>& thePoint1,
- const std::pair<std::shared_ptr<GeomAPI_Pnt2d>, ModelHighAPI_RefAttr>& thePoint2,
- const std::pair<std::shared_ptr<GeomAPI_Pnt2d>, ModelHighAPI_RefAttr>& thePassedPoint,
+ const PointOrReference& thePoint1,
+ const PointOrReference& thePoint2,
+ const PointOrReference& thePassedPoint,
bool isPoint1Center)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
}
std::shared_ptr<SketchAPI_Ellipse> SketchAPI_Sketch::addEllipse(
- const std::string & theExternalName)
+ const std::wstring & theExternalName)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_Ellipse::ID());
}
//--------------------------------------------------------------------------------------
-std::shared_ptr<SketchAPI_Projection> SketchAPI_Sketch::addProjection(
- const ModelHighAPI_Selection & theExternalFeature,
- bool theKeepResult)
+std::shared_ptr<SketchAPI_EllipticArc> SketchAPI_Sketch::addEllipticArc(
+ double theCenterX, double theCenterY,
+ double theFocusX, double theFocusY,
+ double theStartX, double theStartY,
+ double theEndX, double theEndY,
+ bool theInversed)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
- compositeFeature()->addFeature(SketchPlugin_Projection::ID());
- ProjectionPtr aProjection(new SketchAPI_Projection(aFeature, theExternalFeature));
- aProjection->setIncludeToResult(theKeepResult);
- return aProjection;
+ compositeFeature()->addFeature(SketchPlugin_EllipticArc::ID());
+ return EllipticArcPtr(new SketchAPI_EllipticArc(aFeature,
+ theCenterX, theCenterY,
+ theFocusX, theFocusY,
+ theStartX, theStartY,
+ theEndX, theEndY,
+ theInversed));
+}
+
+std::shared_ptr<SketchAPI_MacroEllipticArc> SketchAPI_Sketch::addEllipticArc(
+ const PointOrReference& theCenter,
+ const PointOrReference& theMajorAxisPoint,
+ const PointOrReference& theStartPoint,
+ const PointOrReference& theEndPoint,
+ bool theInversed)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_MacroEllipticArc::ID());
+ return MacroEllipticArcPtr(new SketchAPI_MacroEllipticArc(aFeature,
+ theCenter.first, theCenter.second,
+ theMajorAxisPoint.first, theMajorAxisPoint.second,
+ theStartPoint.first, theStartPoint.second,
+ theEndPoint.first, theEndPoint.second,
+ theInversed));
+}
+
+std::shared_ptr<SketchAPI_EllipticArc> SketchAPI_Sketch::addEllipticArc(
+ const ModelHighAPI_Selection & theExternal)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_EllipticArc::ID());
+ return EllipticArcPtr(new SketchAPI_EllipticArc(aFeature, theExternal));
+}
+
+std::shared_ptr<SketchAPI_EllipticArc> SketchAPI_Sketch::addEllipticArc(
+ const std::wstring & theExternalName)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_EllipticArc::ID());
+ return EllipticArcPtr(new SketchAPI_EllipticArc(aFeature, theExternalName));
+}
+
+//--------------------------------------------------------------------------------------
+
+std::shared_ptr<SketchAPI_BSpline> SketchAPI_Sketch::addSpline(
+ const ModelHighAPI_Selection & external,
+ const int degree,
+ const std::list<PointOrReference>& poles,
+ const std::list<ModelHighAPI_Double>& weights,
+ const std::list<ModelHighAPI_Double>& knots,
+ const std::list<ModelHighAPI_Integer>& multiplicities,
+ const bool periodic)
+{
+ // split poles and references to other shapes
+ bool hasReference = false;
+ std::list<GeomPnt2dPtr> aPoints;
+ std::list<ModelHighAPI_RefAttr> aReferences;
+ for (std::list<PointOrReference>::const_iterator it = poles.begin(); it != poles.end(); ++it) {
+ aPoints.push_back(it->first);
+ aReferences.push_back(it->second);
+ if (!it->second.isEmpty())
+ hasReference = true;
+ }
+
+ BSplinePtr aBSpline;
+ CompositeFeaturePtr aSketch = compositeFeature();
+ if (hasReference) {
+ // use macro-feature to create coincidences to referred features
+ FeaturePtr aMacroFeature = aSketch->addFeature(
+ periodic ? SketchPlugin_MacroBSplinePeriodic::ID() : SketchPlugin_MacroBSpline::ID());
+ AttributePoint2DArrayPtr aPolesAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2DArray>(
+ aMacroFeature->attribute(SketchPlugin_MacroBSpline::POLES_ID()));
+ AttributeDoubleArrayPtr aWeightsAttr =
+ aMacroFeature->data()->realArray(SketchPlugin_MacroBSpline::WEIGHTS_ID());
+ AttributeRefAttrListPtr aPolesRefAttr =
+ aMacroFeature->data()->refattrlist(SketchPlugin_MacroBSpline::REF_POLES_ID());
+ // always generate a control polygon to apply coincidences correctly
+ aMacroFeature->boolean(SketchPlugin_MacroBSpline::CONTROL_POLYGON_ID())->setValue(true);
+ // initialize B-spline attributes
+ fillAttribute(aPoints, aPolesAttr);
+ if (weights.empty())
+ fillAttribute(std::list<ModelHighAPI_Double>(poles.size(), 1.0), aWeightsAttr);
+ else
+ fillAttribute(weights, aWeightsAttr);
+ fillAttribute(aReferences, aPolesRefAttr);
+ apply(); // to kill macro-feature
+
+ // find created B-spline feature
+ const std::string& aKindToFind =
+ periodic ? SketchPlugin_BSplinePeriodic::ID() : SketchPlugin_BSpline::ID();
+ int aNbSubs = aSketch->numberOfSubs();
+ for (int anIndex = aNbSubs - 1; anIndex >= 0; --anIndex) {
+ FeaturePtr aFeature = aSketch->subFeature(anIndex);
+ if (aFeature->getKind() == aKindToFind) {
+ aBSpline.reset(periodic ? new SketchAPI_BSplinePeriodic(aFeature)
+ : new SketchAPI_BSpline(aFeature));
+ aBSpline->execute();
+ break;
+ }
+ }
+ }
+ else {
+ // compute B-spline by parameters
+ FeaturePtr aFeature = aSketch->addFeature(
+ periodic ? SketchPlugin_BSplinePeriodic::ID() : SketchPlugin_BSpline::ID());
+
+ aBSpline.reset(periodic ? new SketchAPI_BSplinePeriodic(aFeature)
+ : new SketchAPI_BSpline(aFeature));
+ if (external.variantType() != ModelHighAPI_Selection::VT_Empty)
+ aBSpline->setByExternal(external);
+ else if (knots.empty() || multiplicities.empty())
+ aBSpline->setByDegreePolesAndWeights(degree, aPoints, weights);
+ else
+ aBSpline->setByParameters(degree, aPoints, weights, knots, multiplicities);
+ }
+ return aBSpline;
+}
+
+//--------------------------------------------------------------------------------------
+static std::shared_ptr<SketchAPI_BSpline> buildInterpolation(
+ const CompositeFeaturePtr& theSketch,
+ const FeaturePtr& theCurveFittingFeature,
+ const std::list<ModelHighAPI_RefAttr>& points,
+ const bool periodic,
+ const bool closed)
+{
+ AttributeBooleanPtr aPeriodicAttr =
+ theCurveFittingFeature->boolean(SketchPlugin_CurveFitting::PERIODIC_ID());
+ fillAttribute(periodic, aPeriodicAttr);
+ AttributeBooleanPtr aClosedAttr =
+ theCurveFittingFeature->boolean(SketchPlugin_CurveFitting::CLOSED_ID());
+ fillAttribute(closed, aClosedAttr);
+ AttributeRefAttrListPtr aPointsAttr =
+ theCurveFittingFeature->refattrlist(SketchPlugin_CurveFitting::POINTS_ID());
+ fillAttribute(points, aPointsAttr);
+ apply(); // to execute and kill the macro-feature
+
+ // find created B-spline feature
+ BSplinePtr aBSpline;
+ const std::string& aKindToFind =
+ periodic ? SketchPlugin_BSplinePeriodic::ID() : SketchPlugin_BSpline::ID();
+ int aNbSubs = theSketch->numberOfSubs();
+ for (int anIndex = aNbSubs - 1; anIndex >= 0; --anIndex) {
+ FeaturePtr aFeature = theSketch->subFeature(anIndex);
+ if (aFeature->getKind() == aKindToFind) {
+ aBSpline.reset(periodic ? new SketchAPI_BSplinePeriodic(aFeature)
+ : new SketchAPI_BSpline(aFeature));
+ aBSpline->execute();
+ break;
+ }
+ }
+ return aBSpline;
+}
+
+std::shared_ptr<SketchAPI_BSpline> SketchAPI_Sketch::addInterpolation(
+ const std::list<ModelHighAPI_RefAttr>& points,
+ const bool periodic,
+ const bool closed)
+{
+ CompositeFeaturePtr aSketch = compositeFeature();
+ FeaturePtr anInterpFeature = aSketch->addFeature(SketchPlugin_CurveFitting::ID());
+ anInterpFeature->string(SketchPlugin_CurveFitting::TYPE_ID())
+ ->setValue(SketchPlugin_CurveFitting::TYPE_INTERPOLATION_ID());
+ return buildInterpolation(aSketch, anInterpFeature, points, periodic, closed);
+}
+
+std::shared_ptr<SketchAPI_BSpline> SketchAPI_Sketch::addApproximation(
+ const std::list<ModelHighAPI_RefAttr>& points,
+ const ModelHighAPI_Double& precision,
+ const bool periodic,
+ const bool closed)
+{
+ CompositeFeaturePtr aSketch = compositeFeature();
+ FeaturePtr anInterpFeature = aSketch->addFeature(SketchPlugin_CurveFitting::ID());
+ anInterpFeature->string(SketchPlugin_CurveFitting::TYPE_ID())
+ ->setValue(SketchPlugin_CurveFitting::TYPE_APPROXIMATION_ID());
+ fillAttribute(precision, anInterpFeature->real(SketchPlugin_CurveFitting::PRECISION_ID()));
+ return buildInterpolation(aSketch, anInterpFeature, points, periodic, closed);
}
+//--------------------------------------------------------------------------------------
std::shared_ptr<SketchAPI_Projection> SketchAPI_Sketch::addProjection(
- const std::string & theExternalName,
- bool theKeepResult)
+ const ModelHighAPI_Selection & theExternalFeature,
+ bool keepResult,
+ bool keepRefToOriginal)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_Projection::ID());
- ProjectionPtr aProjection(new SketchAPI_Projection(aFeature, theExternalName));
- aProjection->setIncludeToResult(theKeepResult);
+ ProjectionPtr aProjection(new SketchAPI_Projection(aFeature));
+ aProjection->setIncludeToResult(keepResult);
+ aProjection->setKeepReferenceToOriginal(keepRefToOriginal);
+ aProjection->setExternalFeature(theExternalFeature);
return aProjection;
}
return MirrorPtr(new SketchAPI_Mirror(aFeature, theMirrorLine, theObjects));
}
+//--------------------------------------------------------------------------------------
+std::shared_ptr<SketchAPI_Offset> SketchAPI_Sketch::addOffset(
+ const std::list<std::shared_ptr<ModelAPI_Object> > & theObjects,
+ const ModelHighAPI_Double & theValue,
+ const bool theReversed)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_Offset::ID());
+ return OffsetPtr(new SketchAPI_Offset(aFeature, theObjects, theValue, theReversed));
+}
+
//--------------------------------------------------------------------------------------
std::shared_ptr<SketchAPI_Translation> SketchAPI_Sketch::addTranslation(
const std::list<std::shared_ptr<ModelAPI_Object> > & theObjects,
std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setAngle(
const ModelHighAPI_RefAttr & theLine1,
const ModelHighAPI_RefAttr & theLine2,
- const ModelHighAPI_Double & theValue)
+ const ModelHighAPI_Double & theValue,
+ const std::string& theType)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_ConstraintAngle::ID());
- fillAttribute(SketcherPrs_Tools::ANGLE_DIRECT,
- aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
- // fill the value before llines to avoid calculation of angle value by the Angle feature
+
+ const int aVersion = theType.empty() ? SketchPlugin_ConstraintAngle::THE_VERSION_0
+ : SketchPlugin_ConstraintAngle::THE_VERSION_1;
+ fillAttribute(aVersion, aFeature->integer(SketchPlugin_ConstraintAngle::VERSION_ID()));
+
+ int aType = (int)SketcherPrs_Tools::ANGLE_DIRECT;
+ fillAttribute(aType, aFeature->integer(SketchPlugin_ConstraintAngle::PREV_TYPE_ID()));
+ fillAttribute(aType, aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
+
+ if (aVersion == SketchPlugin_ConstraintAngle::THE_VERSION_0)
+ fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
+
fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
- fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
+
+ if (aVersion == SketchPlugin_ConstraintAngle::THE_VERSION_1) {
+ std::string aTypeLC = theType;
+ std::transform(aTypeLC.begin(), aTypeLC.end(), aTypeLC.begin(),
+ [](char c) { return static_cast<char>(::tolower(c)); });
+ if (aTypeLC == "supplementary")
+ aType = (int)SketcherPrs_Tools::ANGLE_COMPLEMENTARY;
+ else if (aTypeLC == "backward")
+ aType = (int)SketcherPrs_Tools::ANGLE_BACKWARD;
+
+ fillAttribute(aType, aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
+ fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
+ }
+
aFeature->execute();
return InterfacePtr(new ModelHighAPI_Interface(aFeature));
}
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_ConstraintAngle::ID());
+ fillAttribute(SketchPlugin_ConstraintAngle::THE_VERSION_0,
+ aFeature->integer(SketchPlugin_ConstraintAngle::VERSION_ID()));
fillAttribute(SketcherPrs_Tools::ANGLE_COMPLEMENTARY,
aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
+ fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
- fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
aFeature->execute();
return InterfacePtr(new ModelHighAPI_Interface(aFeature));
}
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_ConstraintAngle::ID());
+ fillAttribute(SketchPlugin_ConstraintAngle::THE_VERSION_0,
+ aFeature->integer(SketchPlugin_ConstraintAngle::VERSION_ID()));
fillAttribute(SketcherPrs_Tools::ANGLE_BACKWARD,
aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
+ fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
- fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
aFeature->execute();
return InterfacePtr(new ModelHighAPI_Interface(aFeature));
}
return std::shared_ptr<GeomAPI_Pnt2d>(new GeomAPI_Pnt2d(x, y));
}
-static std::shared_ptr<GeomAPI_Pnt2d> middlePoint(const ObjectPtr& theObject)
+static std::shared_ptr<GeomAPI_Pnt2d> pointOnEllipse(const FeaturePtr& theFeature,
+ bool isEllipse = true)
+{
+ const std::string& anAttrName = isEllipse ? SketchPlugin_Ellipse::MAJOR_AXIS_END_ID() :
+ SketchPlugin_EllipticArc::MAJOR_AXIS_END_ID();
+ AttributePoint2DPtr aMajorAxisEnd = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ theFeature->attribute(anAttrName));
+ return aMajorAxisEnd ? aMajorAxisEnd->pnt() : std::shared_ptr<GeomAPI_Pnt2d>();
+}
+
+static std::shared_ptr<GeomAPI_Pnt2d> middlePointOnBSpline(const FeaturePtr& theFeature,
+ SketchAPI_Sketch* theSketch)
+{
+ GeomAPI_Edge anEdge(theFeature->lastResult()->shape());
+ GeomPointPtr aMiddle = anEdge.middlePoint();
+ return theSketch->to2D(aMiddle);
+}
+
+static std::shared_ptr<GeomAPI_Pnt2d> middlePoint(const ObjectPtr& theObject,
+ SketchAPI_Sketch* theSketch)
{
std::shared_ptr<GeomAPI_Pnt2d> aMiddlePoint;
FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
aMiddlePoint = pointOnCircle(aFeature);
else if (aFeatureKind == SketchPlugin_Arc::ID())
aMiddlePoint = middlePointOnArc(aFeature);
+ else if (aFeatureKind == SketchPlugin_Ellipse::ID())
+ aMiddlePoint = pointOnEllipse(aFeature);
+ else if (aFeatureKind == SketchPlugin_EllipticArc::ID())
+ aMiddlePoint = pointOnEllipse(aFeature, false);
+ else if (aFeatureKind == SketchPlugin_BSpline::ID() ||
+ aFeatureKind == SketchPlugin_BSplinePeriodic::ID())
+ aMiddlePoint = middlePointOnBSpline(aFeature, theSketch);
}
return aMiddlePoint;
}
if (aMessage->movedAttribute())
anOriginalPosition = pointCoordinates(aMessage->movedAttribute());
else
- anOriginalPosition = middlePoint(aMessage->movedObject());
+ anOriginalPosition = middlePoint(aMessage->movedObject(), this);
if (!anOriginalPosition)
return; // something has gone wrong, do not process movement
aBase->attribute(SketchPlugin_Sketch::DIRX_ID()))->dir();
// Check the plane is coordinate plane
- std::string aPlaneName = defaultPlane(anOrigin, aNormal, aDirX);
+ std::wstring aPlaneName = defaultPlane(anOrigin, aNormal, aDirX);
if(anExternal->context()) { // checking for selected planes
if (!aPlaneName.empty()
&& anExternal->context()->data()
std::list<std::list<ResultPtr> > aFaces;
edgesOfSketchFaces(aCompFeat, aFaces);
+ /// remove faces that must not be dumped
+ std::vector< std::list<std::list<ResultPtr>>::iterator> aFacesToRemove;
+ for(auto itFaces = aFaces.begin(); itFaces != aFaces.end(); ++itFaces)
+ {
+ auto & facesGroup = *itFaces;
+ std::vector<std::list<ResultPtr>::iterator> subFacestoRemove;
+ for(auto itGroup = facesGroup.begin(); itGroup != facesGroup.end(); ++itGroup)
+ {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(*itGroup);
+ if(theDumper.isDumped(aFeature)){
+ subFacestoRemove.push_back(itGroup);
+ }
+ }
+ for(auto itGroup :subFacestoRemove){
+ facesGroup.erase(itGroup);
+ }
+
+ if(!facesGroup.size()){
+ aFacesToRemove.push_back(itFaces);
+ }
+ }
+ for(auto itFaces :aFacesToRemove){
+ aFaces.erase(itFaces);
+ }
+
+ if(!aFaces.size())
+ return;
+
const std::string& aSketchName = theDumper.name(aBase);
std::string aMethodName(".changeFacesOrder");
std::string aSpaceShift(aSketchName.size() + aMethodName.size(), ' ');
theDumper << *aFIt;
}
theDumper << "\n" << aSpaceShift << " ])" << std::endl;
+ // call model.do() for correct update of the document's labels related to the changed faces
+ theDumper << "model.do()" << std::endl;
}
}