#include <SketchPlugin_ConstraintCollinear.h>
#include <SketchPlugin_ConstraintDistance.h>
#include <SketchPlugin_ConstraintEqual.h>
-#include <SketchPlugin_ConstraintFillet.h>
+#include <SketchPlugin_Fillet.h>
#include <SketchPlugin_ConstraintHorizontal.h>
#include <SketchPlugin_ConstraintLength.h>
#include <SketchPlugin_ConstraintMiddle.h>
#include <SketchPlugin_ConstraintRadius.h>
#include <SketchPlugin_ConstraintRigid.h>
#include <SketchPlugin_ConstraintSplit.h>
+#include <SketchPlugin_Trim.h>
#include <SketchPlugin_ConstraintTangent.h>
#include <SketchPlugin_ConstraintVertical.h>
#include <SketcherPrs_Tools.h>
//--------------------------------------------------------------------------------------
#include <ModelAPI_CompositeFeature.h>
#include <ModelAPI_ResultConstruction.h>
+#include <ModelHighAPI_Double.h>
#include <ModelHighAPI_Dumper.h>
#include <ModelHighAPI_RefAttr.h>
#include <ModelHighAPI_Selection.h>
#include <ModelHighAPI_Tools.h>
//--------------------------------------------------------------------------------------
#include "SketchAPI_Arc.h"
+#include "SketchAPI_MacroArc.h"
#include "SketchAPI_Circle.h"
#include "SketchAPI_IntersectionPoint.h"
#include "SketchAPI_Line.h"
+#include "SketchAPI_MacroCircle.h"
#include "SketchAPI_Mirror.h"
#include "SketchAPI_Point.h"
#include "SketchAPI_Projection.h"
const std::shared_ptr<ModelHighAPI_Interface> & theConstraint,
const ModelHighAPI_Double & theValue)
{
- // TODO(spo): check somehow that the feature is a constraint or eliminate
- // crash if the feature have no real attribute VALUE
fillAttribute(theValue, theConstraint->feature()->real(SketchPlugin_Constraint::VALUE()));
// theConstraint->execute();
SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
const std::shared_ptr<GeomAPI_Ax3> & thePlane)
{
- // TODO(spo): check that thePart is not empty
std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
return SketchPtr(new SketchAPI_Sketch(aFeature, thePlane));
}
SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
const ModelHighAPI_Selection & theExternal)
{
- // TODO(spo): check that thePart is not empty
std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
return SketchPtr(new SketchAPI_Sketch(aFeature, theExternal));
}
SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
const std::string & theExternalName)
{
- // TODO(spo): check that thePart is not empty
std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
return SketchPtr(
new SketchAPI_Sketch(aFeature, ModelHighAPI_Selection("FACE", theExternalName)));
return CirclePtr(new SketchAPI_Circle(aFeature, theCenter, theRadius));
}
-std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(double theX1, double theY1,
- double theX2, double theY2,
- double theX3, double theY3)
+std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(double theCenterX,
+ double theCenterY,
+ double thePassedX,
+ double thePassedY)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
- compositeFeature()->addFeature(SketchPlugin_Circle::ID());
- return CirclePtr(new SketchAPI_Circle(aFeature, theX1, theY1, theX2, theY2, theX3, theY3));
+ compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
+ return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, theCenterX, theCenterY,
+ thePassedX, thePassedY));
}
-std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(
- const std::shared_ptr<GeomAPI_Pnt2d>& thePoint1,
- const std::shared_ptr<GeomAPI_Pnt2d>& thePoint2,
- const std::shared_ptr<GeomAPI_Pnt2d>& thePoint3)
+std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(
+ const std::shared_ptr<GeomAPI_Pnt2d>& theCenterPoint,
+ const std::shared_ptr<GeomAPI_Pnt2d>& thePassedPoint)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
- compositeFeature()->addFeature(SketchPlugin_Circle::ID());
- return CirclePtr(new SketchAPI_Circle(aFeature, thePoint1, thePoint2, thePoint3));
+ compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
+ return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, theCenterPoint, thePassedPoint));
+}
+
+std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(double theX1, double theY1,
+ double theX2, double theY2,
+ double theX3, double theY3)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
+ return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, theX1, theY1,
+ theX2, theY2,
+ theX3, theY3));
+}
+
+std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(
+ const std::shared_ptr<GeomAPI_Pnt2d>& thePoint1,
+ const std::shared_ptr<GeomAPI_Pnt2d>& thePoint2,
+ const std::shared_ptr<GeomAPI_Pnt2d>& thePoint3)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
+ return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, thePoint1, thePoint2, thePoint3));
}
std::shared_ptr<SketchAPI_Circle>
return ArcPtr(new SketchAPI_Arc(aFeature, theCenter, theStart, theEnd, theInversed));
}
-std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(double theStartX, double theStartY,
+std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(double theStartX, double theStartY,
double theEndX, double theEndY,
double thePassedX, double thePassedY)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
- compositeFeature()->addFeature(SketchPlugin_Arc::ID());
- return ArcPtr(new SketchAPI_Arc(aFeature,
- theStartX, theStartY,
- theEndX, theEndY,
- thePassedX, thePassedY));
+ compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
+ return MacroArcPtr(new SketchAPI_MacroArc(aFeature,
+ theStartX, theStartY,
+ theEndX, theEndY,
+ thePassedX, thePassedY));
}
-std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(
+std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
const std::shared_ptr<GeomAPI_Pnt2d>& theStart,
const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
const std::shared_ptr<GeomAPI_Pnt2d>& thePassed)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
- compositeFeature()->addFeature(SketchPlugin_Arc::ID());
- return ArcPtr(new SketchAPI_Arc(aFeature, theStart, theEnd, thePassed));
+ compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
+ return MacroArcPtr(new SketchAPI_MacroArc(aFeature, theStart, theEnd, thePassed));
}
-std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(
+std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
const ModelHighAPI_RefAttr& theTangentPoint,
double theEndX, double theEndY,
bool theInversed)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
- compositeFeature()->addFeature(SketchPlugin_Arc::ID());
- return ArcPtr(new SketchAPI_Arc(aFeature, theTangentPoint, theEndX, theEndY, theInversed));
+ compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
+ return MacroArcPtr(new SketchAPI_MacroArc(
+ aFeature, theTangentPoint, theEndX, theEndY, theInversed));
}
-std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(
+std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
const ModelHighAPI_RefAttr& theTangentPoint,
const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
bool theInversed)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
- compositeFeature()->addFeature(SketchPlugin_Arc::ID());
- return ArcPtr(new SketchAPI_Arc(aFeature, theTangentPoint, theEnd, theInversed));
+ compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
+ return MacroArcPtr(new SketchAPI_MacroArc(aFeature, theTangentPoint, theEnd, theInversed));
}
std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(const ModelHighAPI_Selection & theExternal)
return InterfacePtr(new ModelHighAPI_Interface(aFeature));
}
+//--------------------------------------------------------------------------------------
+std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::addTrim(
+ const ModelHighAPI_Reference& theFeature,
+ const std::shared_ptr<GeomAPI_Pnt2d>& thePositionPoint)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_Trim::ID());
+ fillAttribute(theFeature, aFeature->reference(SketchPlugin_Trim::SELECTED_OBJECT()));
+
+ AttributePtr anAttribute = aFeature->attribute(SketchPlugin_Trim::SELECTED_POINT());
+ if (anAttribute->attributeType() == GeomDataAPI_Point2D::typeId()) {
+ AttributePoint2DPtr aPointAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(anAttribute);
+ fillAttribute(thePositionPoint, aPointAttr);
+ }
+
+ return InterfacePtr(new ModelHighAPI_Interface(aFeature));
+}
+
//--------------------------------------------------------------------------------------
std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setAngle(
const ModelHighAPI_RefAttr & theLine1,
compositeFeature()->addFeature(SketchPlugin_ConstraintAngle::ID());
fillAttribute(SketcherPrs_Tools::ANGLE_DIRECT,
aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
+ // fill the value before llines to avoid calculation of angle value by the Angle feature
+ fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
- fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
aFeature->execute();
return InterfacePtr(new ModelHighAPI_Interface(aFeature));
}
}
std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setFillet(
- const std::list<ModelHighAPI_RefAttr> & thePoints,
- const ModelHighAPI_Double & theRadius)
+ const ModelHighAPI_RefAttr & thePoint)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
- compositeFeature()->addFeature(SketchPlugin_ConstraintFillet::ID());
- fillAttribute(thePoints, aFeature->data()->refattrlist(SketchPlugin_Constraint::ENTITY_A()));
- fillAttribute(theRadius, aFeature->real(SketchPlugin_Constraint::VALUE()));
- aFeature->execute();
+ compositeFeature()->addFeature(SketchPlugin_Fillet::ID());
+ fillAttribute(thePoint, aFeature->data()->refattr(SketchPlugin_Fillet::FILLET_POINT_ID()));
+ apply(); // finish operation to remove Fillet feature correcly
return InterfacePtr(new ModelHighAPI_Interface(aFeature));
}
+std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setFilletWithRadius(
+ const ModelHighAPI_RefAttr & thePoint,
+ const ModelHighAPI_Double & theRadius)
+{
+ CompositeFeaturePtr aSketch = compositeFeature();
+ int aNbSubs = aSketch->numberOfSubs();
+
+ // create fillet
+ InterfacePtr aFilletFeature = setFillet(thePoint);
+
+ // set radius for just created arc
+ FeaturePtr anArc = aSketch->subFeature(aNbSubs - 1);
+ if (anArc->getKind() == SketchPlugin_Arc::ID())
+ setRadius(ModelHighAPI_RefAttr(ObjectPtr(anArc->lastResult())), ModelHighAPI_Double(theRadius));
+
+ return aFilletFeature;
+}
+
std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setFixed(
const ModelHighAPI_RefAttr & theObject)
{
//--------------------------------------------------------------------------------------
+std::shared_ptr<GeomAPI_Pnt2d> SketchAPI_Sketch::to2D(const std::shared_ptr<GeomAPI_Pnt>& thePoint)
+{
+ FeaturePtr aBase = feature();
+ std::shared_ptr<GeomDataAPI_Point> aC = std::dynamic_pointer_cast<GeomDataAPI_Point>(
+ aBase->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
+ std::shared_ptr<GeomDataAPI_Dir> aNorm = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ aBase->attribute(SketchPlugin_Sketch::NORM_ID()));
+ std::shared_ptr<GeomDataAPI_Dir> aX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ aBase->attribute(SketchPlugin_Sketch::DIRX_ID()));
+ std::shared_ptr<GeomAPI_Dir> aY(new GeomAPI_Dir(aNorm->dir()->cross(aX->dir())));
+
+ return thePoint->to2D(aC->pnt(), aX->dir(), aY);
+}
+
+//--------------------------------------------------------------------------------------
+
void SketchAPI_Sketch::dump(ModelHighAPI_Dumper& theDumper) const
{
FeaturePtr aBase = feature();
// Check the plane is coordinate plane
std::string aPlaneName = defaultPlane(anOrigin, aNormal, aDirX);
- if (anExternal->context()) { // checking for selected planes
- if (!aPlaneName.empty()) {
+ if(anExternal->context()) { // checking for selected planes
+ if (!aPlaneName.empty()
+ && anExternal->context()->data()
+ && anExternal->context()->data()->name() == aPlaneName) {
// dump sketch based on coordinate plane
theDumper << aBase << " = model.addSketch(" << aDocName
<< ", model.standardPlane(\"" << aPlaneName << "\"))" << std::endl;
