-// Copyright (C) 2014-2019 CEA/DEN, EDF R&D
+// Copyright (C) 2014-2021 CEA/DEN, EDF R&D
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
#include <SketchPlugin_ConstraintPerpendicular.h>
#include <SketchPlugin_ConstraintRadius.h>
#include <SketchPlugin_ConstraintRigid.h>
+#include <SketchPlugin_CurveFitting.h>
#include <SketchPlugin_Trim.h>
#include <SketchPlugin_Split.h>
#include <SketchPlugin_ConstraintTangent.h>
#include <SketchPlugin_ConstraintVertical.h>
#include <SketchPlugin_MacroBSpline.h>
+#include <SketchPlugin_SketchCopy.h>
+#include <SketchPlugin_Offset.h>
#include <SketcherPrs_Tools.h>
//--------------------------------------------------------------------------------------
#include <ModelAPI_Events.h>
#include "SketchAPI_MacroEllipse.h"
#include "SketchAPI_MacroEllipticArc.h"
#include "SketchAPI_Mirror.h"
+#include "SketchAPI_Offset.h"
#include "SketchAPI_Point.h"
#include "SketchAPI_Projection.h"
#include "SketchAPI_Rectangle.h"
}
SketchPtr addSketch(const std::shared_ptr<ModelAPI_Document> & thePart,
- const std::string & theExternalName)
+ const std::wstring & theExternalName)
{
std::shared_ptr<ModelAPI_Feature> aFeature = thePart->addFeature(SketchAPI_Sketch::ID());
return SketchPtr(
return SketchPtr(new SketchAPI_Sketch(aFeature, thePlaneObject));
}
+//--------------------------------------------------------------------------------------
+SketchPtr copySketch(const std::shared_ptr<ModelAPI_Document> & thePart,
+ const SketchPtr & theSketch)
+{
+ FeaturePtr aCopyer = thePart->addFeature(SketchPlugin_SketchCopy::ID());
+ aCopyer->reference(SketchPlugin_SketchCopy::BASE_ID())->setValue(theSketch->feature());
+ aCopyer->execute();
+
+ FeaturePtr aNewSketch = thePart->nextFeature(aCopyer);
+
+ // perform removing the macro-feature
+ thePart->removeFeature(aCopyer);
+ apply();
+
+ return SketchPtr(new SketchAPI_Sketch(aNewSketch));
+}
+
//--------------------------------------------------------------------------------------
std::list< std::shared_ptr<SketchAPI_Point> > SketchAPI_Sketch::getFreePoints()
compositeFeature()->addFeature(SketchPlugin_Point::ID());
return PointPtr(new SketchAPI_Point(aFeature, theExternal));
}
-std::shared_ptr<SketchAPI_Point> SketchAPI_Sketch::addPoint(const std::string & theExternalName)
+std::shared_ptr<SketchAPI_Point> SketchAPI_Sketch::addPoint(const std::wstring & theExternalName)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_Point::ID());
return anIntersection;
}
std::shared_ptr<SketchAPI_IntersectionPoint> SketchAPI_Sketch::addIntersectionPoint(
- const std::string & theExternalName,
+ const std::wstring & theExternalName,
bool theKeepResult)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_Line::ID());
return LinePtr(new SketchAPI_Line(aFeature, theExternal));
}
-std::shared_ptr<SketchAPI_Line> SketchAPI_Sketch::addLine(const std::string & theExternalName)
+std::shared_ptr<SketchAPI_Line> SketchAPI_Sketch::addLine(const std::wstring & theExternalName)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_Line::ID());
return CirclePtr(new SketchAPI_Circle(aFeature, theExternal));
}
-std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(const std::string & theExternalName)
+std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(const std::wstring & theExternalName)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_Circle::ID());
return ArcPtr(new SketchAPI_Arc(aFeature, theExternal));
}
-std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(const std::string & theExternalName)
+std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(const std::wstring & theExternalName)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_Arc::ID());
}
std::shared_ptr<SketchAPI_Ellipse> SketchAPI_Sketch::addEllipse(
- const std::string & theExternalName)
+ const std::wstring & theExternalName)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_Ellipse::ID());
}
std::shared_ptr<SketchAPI_EllipticArc> SketchAPI_Sketch::addEllipticArc(
- const std::string & theExternalName)
+ const std::wstring & theExternalName)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_EllipticArc::ID());
}
//--------------------------------------------------------------------------------------
-std::shared_ptr<SketchAPI_Projection> SketchAPI_Sketch::addProjection(
- const ModelHighAPI_Selection & theExternalFeature,
- bool theKeepResult)
+static std::shared_ptr<SketchAPI_BSpline> buildInterpolation(
+ const CompositeFeaturePtr& theSketch,
+ const FeaturePtr& theCurveFittingFeature,
+ const std::list<ModelHighAPI_RefAttr>& points,
+ const bool periodic,
+ const bool closed)
+{
+ AttributeBooleanPtr aPeriodicAttr =
+ theCurveFittingFeature->boolean(SketchPlugin_CurveFitting::PERIODIC_ID());
+ fillAttribute(periodic, aPeriodicAttr);
+ AttributeBooleanPtr aClosedAttr =
+ theCurveFittingFeature->boolean(SketchPlugin_CurveFitting::CLOSED_ID());
+ fillAttribute(closed, aClosedAttr);
+ AttributeRefAttrListPtr aPointsAttr =
+ theCurveFittingFeature->refattrlist(SketchPlugin_CurveFitting::POINTS_ID());
+ fillAttribute(points, aPointsAttr);
+ apply(); // to execute and kill the macro-feature
+
+ // find created B-spline feature
+ BSplinePtr aBSpline;
+ const std::string& aKindToFind =
+ periodic ? SketchPlugin_BSplinePeriodic::ID() : SketchPlugin_BSpline::ID();
+ int aNbSubs = theSketch->numberOfSubs();
+ for (int anIndex = aNbSubs - 1; anIndex >= 0; --anIndex) {
+ FeaturePtr aFeature = theSketch->subFeature(anIndex);
+ if (aFeature->getKind() == aKindToFind) {
+ aBSpline.reset(periodic ? new SketchAPI_BSplinePeriodic(aFeature)
+ : new SketchAPI_BSpline(aFeature));
+ aBSpline->execute();
+ break;
+ }
+ }
+ return aBSpline;
+}
+
+std::shared_ptr<SketchAPI_BSpline> SketchAPI_Sketch::addInterpolation(
+ const std::list<ModelHighAPI_RefAttr>& points,
+ const bool periodic,
+ const bool closed)
{
- std::shared_ptr<ModelAPI_Feature> aFeature =
- compositeFeature()->addFeature(SketchPlugin_Projection::ID());
- ProjectionPtr aProjection(new SketchAPI_Projection(aFeature, theExternalFeature));
- aProjection->setIncludeToResult(theKeepResult);
- return aProjection;
+ CompositeFeaturePtr aSketch = compositeFeature();
+ FeaturePtr anInterpFeature = aSketch->addFeature(SketchPlugin_CurveFitting::ID());
+ anInterpFeature->string(SketchPlugin_CurveFitting::TYPE_ID())
+ ->setValue(SketchPlugin_CurveFitting::TYPE_INTERPOLATION_ID());
+ return buildInterpolation(aSketch, anInterpFeature, points, periodic, closed);
}
+std::shared_ptr<SketchAPI_BSpline> SketchAPI_Sketch::addApproximation(
+ const std::list<ModelHighAPI_RefAttr>& points,
+ const ModelHighAPI_Double& precision,
+ const bool periodic,
+ const bool closed)
+{
+ CompositeFeaturePtr aSketch = compositeFeature();
+ FeaturePtr anInterpFeature = aSketch->addFeature(SketchPlugin_CurveFitting::ID());
+ anInterpFeature->string(SketchPlugin_CurveFitting::TYPE_ID())
+ ->setValue(SketchPlugin_CurveFitting::TYPE_APPROXIMATION_ID());
+ fillAttribute(precision, anInterpFeature->real(SketchPlugin_CurveFitting::PRECISION_ID()));
+ return buildInterpolation(aSketch, anInterpFeature, points, periodic, closed);
+}
+
+//--------------------------------------------------------------------------------------
std::shared_ptr<SketchAPI_Projection> SketchAPI_Sketch::addProjection(
- const std::string & theExternalName,
- bool theKeepResult)
+ const ModelHighAPI_Selection & theExternalFeature,
+ bool keepResult,
+ bool keepRefToOriginal)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_Projection::ID());
- ProjectionPtr aProjection(new SketchAPI_Projection(aFeature, theExternalName));
- aProjection->setIncludeToResult(theKeepResult);
+ ProjectionPtr aProjection(new SketchAPI_Projection(aFeature));
+ aProjection->setIncludeToResult(keepResult);
+ aProjection->setKeepReferenceToOriginal(keepRefToOriginal);
+ aProjection->setExternalFeature(theExternalFeature);
return aProjection;
}
return MirrorPtr(new SketchAPI_Mirror(aFeature, theMirrorLine, theObjects));
}
+//--------------------------------------------------------------------------------------
+std::shared_ptr<SketchAPI_Offset> SketchAPI_Sketch::addOffset(
+ const std::list<std::shared_ptr<ModelAPI_Object> > & theObjects,
+ const ModelHighAPI_Double & theValue,
+ const bool theReversed)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_Offset::ID());
+ return OffsetPtr(new SketchAPI_Offset(aFeature, theObjects, theValue, theReversed));
+}
+
//--------------------------------------------------------------------------------------
std::shared_ptr<SketchAPI_Translation> SketchAPI_Sketch::addTranslation(
const std::list<std::shared_ptr<ModelAPI_Object> > & theObjects,
if (aVersion == SketchPlugin_ConstraintAngle::THE_VERSION_1) {
std::string aTypeLC = theType;
- std::transform(aTypeLC.begin(), aTypeLC.end(), aTypeLC.begin(), ::tolower);
+ std::transform(aTypeLC.begin(), aTypeLC.end(), aTypeLC.begin(),
+ [](char c) { return static_cast<char>(::tolower(c)); });
if (aTypeLC == "supplementary")
aType = (int)SketcherPrs_Tools::ANGLE_COMPLEMENTARY;
else if (aTypeLC == "backward")
aBase->attribute(SketchPlugin_Sketch::DIRX_ID()))->dir();
// Check the plane is coordinate plane
- std::string aPlaneName = defaultPlane(anOrigin, aNormal, aDirX);
+ std::wstring aPlaneName = defaultPlane(anOrigin, aNormal, aDirX);
if(anExternal->context()) { // checking for selected planes
if (!aPlaneName.empty()
&& anExternal->context()->data()
