-// Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+// Copyright (C) 2014-2019 CEA/DEN, EDF R&D
//
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
//
// You should have received a copy of the GNU Lesser General Public
// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
-// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
#include "SketchAPI_Sketch.h"
#include <SketchPlugin_ConstraintCoincidence.h>
#include <SketchPlugin_ConstraintCollinear.h>
#include <SketchPlugin_ConstraintDistance.h>
+#include <SketchPlugin_ConstraintDistanceHorizontal.h>
+#include <SketchPlugin_ConstraintDistanceVertical.h>
#include <SketchPlugin_ConstraintEqual.h>
#include <SketchPlugin_Fillet.h>
#include <SketchPlugin_ConstraintHorizontal.h>
#include <SketchPlugin_ConstraintVertical.h>
#include <SketcherPrs_Tools.h>
//--------------------------------------------------------------------------------------
+#include <ModelAPI_Events.h>
#include <ModelAPI_CompositeFeature.h>
#include <ModelAPI_ResultConstruction.h>
#include <ModelHighAPI_Double.h>
#include <ModelHighAPI_Tools.h>
//--------------------------------------------------------------------------------------
#include "SketchAPI_Arc.h"
-#include "SketchAPI_MacroArc.h"
+#include "SketchAPI_BSpline.h"
#include "SketchAPI_Circle.h"
+#include "SketchAPI_Ellipse.h"
+#include "SketchAPI_EllipticArc.h"
#include "SketchAPI_IntersectionPoint.h"
#include "SketchAPI_Line.h"
+#include "SketchAPI_MacroArc.h"
#include "SketchAPI_MacroCircle.h"
+#include "SketchAPI_MacroEllipse.h"
+#include "SketchAPI_MacroEllipticArc.h"
#include "SketchAPI_Mirror.h"
#include "SketchAPI_Point.h"
#include "SketchAPI_Projection.h"
#include "SketchAPI_Rotation.h"
#include "SketchAPI_Translation.h"
//--------------------------------------------------------------------------------------
+#include <GeomAPI_Curve.h>
+#include <GeomAPI_Dir2d.h>
+#include <GeomAPI_PlanarEdges.h>
+#include <GeomAPI_ShapeExplorer.h>
+#include <GeomAPI_XY.h>
+#include <GeomAlgoAPI_SketchBuilder.h>
+
+#include <algorithm>
+#include <cmath>
+//--------------------------------------------------------------------------------------
SketchAPI_Sketch::SketchAPI_Sketch(
const std::shared_ptr<ModelAPI_Feature> & theFeature)
: ModelHighAPI_Interface(theFeature)
execute();
}
+void SketchAPI_Sketch::setPlane(const ModelHighAPI_Selection & thePlane,
+ bool theRemoveExternalDependency)
+{
+ FeaturePtr aSketch = feature();
+
+ DocumentPtr aDoc = aSketch->document();
+ bool useVisible = false;
+ FeaturePtr aCurFeatureBefore = aDoc->currentFeature(useVisible);
+ aDoc->setCurrentFeature(aSketch, useVisible);
+
+ if (theRemoveExternalDependency)
+ aSketch->customAction(SketchPlugin_Sketch::ACTION_REMOVE_EXTERNAL());
+
+ setExternal(thePlane);
+
+ aDoc->setCurrentFeature(aCurFeatureBefore, useVisible);
+}
+
+//--------------------------------------------------------------------------------------
void SketchAPI_Sketch::setExternal(const ModelHighAPI_Selection & theExternal)
{
fillAttribute(theExternal, myexternal);
}
+//--------------------------------------------------------------------------------------
+std::list< std::shared_ptr<SketchAPI_Point> > SketchAPI_Sketch::getFreePoints()
+{
+ std::list< std::shared_ptr<SketchAPI_Point> > aFreePoints;
+ std::list<ResultPtr> aPoints = SketcherPrs_Tools::getFreePoints(compositeFeature());
+ for (std::list<ResultPtr>::iterator anIt = aPoints.begin(); anIt != aPoints.end(); ++anIt) {
+ FeaturePtr aFeature = ModelAPI_Feature::feature(*anIt);
+ PointPtr aPoint(new SketchAPI_Point(aFeature));
+ aFreePoints.push_back(aPoint);
+ }
+ return aFreePoints;
+}
+
+//--------------------------------------------------------------------------------------
+static GeomCurvePtr untrimmedCurve(GeomShapePtr theShape)
+{
+ GeomCurvePtr aCurve(new GeomAPI_Curve(theShape));
+ if (aCurve->isTrimmed())
+ aCurve = aCurve->basisCurve();
+ return aCurve;
+}
+
+void SketchAPI_Sketch::changeFacesOrder(
+ const std::list<std::list<ModelHighAPI_Selection> >& theFaces)
+{
+ // collect faces of the sketch
+ ResultConstructionPtr aSketchResult =
+ std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(feature()->lastResult());
+ if (!aSketchResult) {
+ // sketch is nested to a boolean operation, thus, it has no result yet.
+ feature()->execute();
+ aSketchResult =
+ std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(feature()->lastResult());
+ }
+ std::list<GeomFacePtr> aFaces;
+ int aFacesNum = aSketchResult->facesNum();
+ for (int i = 0; i < aFacesNum; ++i)
+ aFaces.push_back(aSketchResult->face(i));
+ // find new faces order according to the given lists of edges
+ std::list<GeomFacePtr> aNewFacesOrder;
+ std::list<std::list<ModelHighAPI_Selection> >::const_iterator anIt = theFaces.begin();
+ for (; anIt != theFaces.end(); ++anIt) {
+ // find the appropriate face
+ std::list<GeomFacePtr>::iterator aFIt = aFaces.begin();
+ for (; aFIt != aFaces.end(); ++aFIt) {
+ std::list<ModelHighAPI_Selection>::const_iterator aEdgeIt = anIt->begin();
+ GeomAPI_ShapeExplorer aFExp(*aFIt, GeomAPI_Shape::EDGE);
+ for (; aEdgeIt != anIt->end() && aFExp.more(); ++aEdgeIt, aFExp.next()) {
+ ResultPtr aCurRes = aEdgeIt->resultSubShapePair().first;
+ if (!aCurRes)
+ break;
+ GeomCurvePtr aCurve1 = untrimmedCurve(aCurRes->shape());
+ GeomCurvePtr aCurve2 = untrimmedCurve(aFExp.current());
+ if (!aCurve1->isEqual(aCurve2))
+ break;
+ }
+
+ if (aEdgeIt == anIt->end() && !aFExp.more()) {
+ // face is found
+ aNewFacesOrder.push_back(*aFIt);
+ aFaces.erase(aFIt);
+ break;
+ }
+ }
+ }
+ // place the rest faces at the end of new faces list
+ if (!aFaces.empty())
+ aNewFacesOrder.insert(aNewFacesOrder.end(), aFaces.begin(), aFaces.end());
+ // update the result of the sketch with the new order of faces
+ aSketchResult->setFacesOrder(aNewFacesOrder);
+}
+
//--------------------------------------------------------------------------------------
std::shared_ptr<SketchAPI_Point> SketchAPI_Sketch::addPoint(
double theX, double theY)
//--------------------------------------------------------------------------------------
std::shared_ptr<SketchAPI_IntersectionPoint> SketchAPI_Sketch::addIntersectionPoint(
- const ModelHighAPI_Selection & theExternal)
+ const ModelHighAPI_Selection & theExternal,
+ bool theKeepResult)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_IntersectionPoint::ID());
- return IntersectionPointPtr(new SketchAPI_IntersectionPoint(aFeature, theExternal));
+ IntersectionPointPtr anIntersection(new SketchAPI_IntersectionPoint(aFeature, theExternal));
+ anIntersection->setIncludeToResult(theKeepResult);
+ return anIntersection;
}
std::shared_ptr<SketchAPI_IntersectionPoint> SketchAPI_Sketch::addIntersectionPoint(
- const std::string & theExternalName)
+ const std::string & theExternalName,
+ bool theKeepResult)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_IntersectionPoint::ID());
- return IntersectionPointPtr(new SketchAPI_IntersectionPoint(aFeature, theExternalName));
+ IntersectionPointPtr anIntersection(new SketchAPI_IntersectionPoint(aFeature, theExternalName));
+ anIntersection->setIncludeToResult(theKeepResult);
+ return anIntersection;
}
//--------------------------------------------------------------------------------------
std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(const std::string & theExternalName)
{
- // TODO(spo): Add constraint SketchConstraintRigid like in PythonAPI. Is it necessary?
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_Circle::ID());
return CirclePtr(new SketchAPI_Circle(aFeature, theExternalName));
std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
const ModelHighAPI_RefAttr& theTangentPoint,
double theEndX, double theEndY,
- bool theInversed)
+ bool theInversed,
+ bool theTransversal)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
- return MacroArcPtr(new SketchAPI_MacroArc(
- aFeature, theTangentPoint, theEndX, theEndY, theInversed));
+ MacroArcPtr aMacroArc(new SketchAPI_MacroArc(aFeature));
+ if (theTransversal)
+ aMacroArc->setByTransversal(theTangentPoint, theEndX, theEndY, theInversed);
+ else
+ aMacroArc->setByTangent(theTangentPoint, theEndX, theEndY, theInversed);
+ return aMacroArc;
}
std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
const ModelHighAPI_RefAttr& theTangentPoint,
const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
- bool theInversed)
+ bool theInversed,
+ bool theTransversal)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
- return MacroArcPtr(new SketchAPI_MacroArc(aFeature, theTangentPoint, theEnd, theInversed));
+ MacroArcPtr aMacroArc(new SketchAPI_MacroArc(aFeature));
+ if (theTransversal)
+ aMacroArc->setByTransversal(theTangentPoint, theEnd, theInversed);
+ else
+ aMacroArc->setByTangent(theTangentPoint, theEnd, theInversed);
+ return aMacroArc;
}
std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(const ModelHighAPI_Selection & theExternal)
std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(const std::string & theExternalName)
{
- // TODO(spo): Add constraint SketchConstraintRigid like in PythonAPI. Is it necessary?
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_Arc::ID());
return ArcPtr(new SketchAPI_Arc(aFeature, theExternalName));
}
+//--------------------------------------------------------------------------------------
+std::shared_ptr<SketchAPI_Ellipse> SketchAPI_Sketch::addEllipse(
+ double theCenterX, double theCenterY,
+ double theFocusX, double theFocusY,
+ double theMinorRadius)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_Ellipse::ID());
+ return EllipsePtr(new SketchAPI_Ellipse(aFeature,
+ theCenterX, theCenterY, theFocusX, theFocusY, theMinorRadius));
+}
+
+std::shared_ptr<SketchAPI_Ellipse> SketchAPI_Sketch::addEllipse(
+ const std::shared_ptr<GeomAPI_Pnt2d>& theCenter,
+ const std::shared_ptr<GeomAPI_Pnt2d>& theFocus,
+ double theMinorRadius)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_Ellipse::ID());
+ return EllipsePtr(new SketchAPI_Ellipse(aFeature, theCenter, theFocus, theMinorRadius));
+}
+
+std::shared_ptr<SketchAPI_MacroEllipse> SketchAPI_Sketch::addEllipse(
+ double thePoint1X, double thePoint1Y,
+ double thePoint2X, double thePoint2Y,
+ double thePassedX, double thePassedY,
+ bool isPoint1Center)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_MacroEllipse::ID());
+ return MacroEllipsePtr(new SketchAPI_MacroEllipse(aFeature,
+ thePoint1X, thePoint1Y, thePoint2X, thePoint2Y, thePassedX, thePassedY, isPoint1Center));
+}
+
+std::shared_ptr<SketchAPI_MacroEllipse> SketchAPI_Sketch::addEllipse(
+ const std::pair<std::shared_ptr<GeomAPI_Pnt2d>, ModelHighAPI_RefAttr>& thePoint1,
+ const std::pair<std::shared_ptr<GeomAPI_Pnt2d>, ModelHighAPI_RefAttr>& thePoint2,
+ const std::pair<std::shared_ptr<GeomAPI_Pnt2d>, ModelHighAPI_RefAttr>& thePassedPoint,
+ bool isPoint1Center)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_MacroEllipse::ID());
+ MacroEllipsePtr anEllipse;
+ if (thePoint1.second.isEmpty() &&
+ thePoint2.second.isEmpty() &&
+ thePassedPoint.second.isEmpty()) {
+ anEllipse.reset(new SketchAPI_MacroEllipse(aFeature,
+ thePoint1.first, thePoint2.first, thePassedPoint.first, isPoint1Center));
+ }
+ else {
+ anEllipse.reset(new SketchAPI_MacroEllipse(aFeature,
+ thePoint1.first, thePoint1.second,
+ thePoint2.first, thePoint2.second,
+ thePassedPoint.first, thePassedPoint.second,
+ isPoint1Center));
+ }
+ return anEllipse;
+}
+
+std::shared_ptr<SketchAPI_Ellipse> SketchAPI_Sketch::addEllipse(
+ const ModelHighAPI_Selection & theExternal)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_Ellipse::ID());
+ return EllipsePtr(new SketchAPI_Ellipse(aFeature, theExternal));
+}
+
+std::shared_ptr<SketchAPI_Ellipse> SketchAPI_Sketch::addEllipse(
+ const std::string & theExternalName)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_Ellipse::ID());
+ return EllipsePtr(new SketchAPI_Ellipse(aFeature, theExternalName));
+}
+
+//--------------------------------------------------------------------------------------
+std::shared_ptr<SketchAPI_EllipticArc> SketchAPI_Sketch::addEllipticArc(
+ double theCenterX, double theCenterY,
+ double theFocusX, double theFocusY,
+ double theStartX, double theStartY,
+ double theEndX, double theEndY,
+ bool theInversed)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_EllipticArc::ID());
+ return EllipticArcPtr(new SketchAPI_EllipticArc(aFeature,
+ theCenterX, theCenterY,
+ theFocusX, theFocusY,
+ theStartX, theStartY,
+ theEndX, theEndY,
+ theInversed));
+}
+
+std::shared_ptr<SketchAPI_MacroEllipticArc> SketchAPI_Sketch::addEllipticArc(
+ const std::pair<std::shared_ptr<GeomAPI_Pnt2d>, ModelHighAPI_RefAttr>& theCenter,
+ const std::pair<std::shared_ptr<GeomAPI_Pnt2d>, ModelHighAPI_RefAttr>& theMajorAxisPoint,
+ const std::pair<std::shared_ptr<GeomAPI_Pnt2d>, ModelHighAPI_RefAttr>& theStartPoint,
+ const std::pair<std::shared_ptr<GeomAPI_Pnt2d>, ModelHighAPI_RefAttr>& theEndPoint,
+ bool theInversed)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_MacroEllipticArc::ID());
+ return MacroEllipticArcPtr(new SketchAPI_MacroEllipticArc(aFeature,
+ theCenter.first, theCenter.second,
+ theMajorAxisPoint.first, theMajorAxisPoint.second,
+ theStartPoint.first, theStartPoint.second,
+ theEndPoint.first, theEndPoint.second,
+ theInversed));
+}
+
+std::shared_ptr<SketchAPI_EllipticArc> SketchAPI_Sketch::addEllipticArc(
+ const ModelHighAPI_Selection & theExternal)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_EllipticArc::ID());
+ return EllipticArcPtr(new SketchAPI_EllipticArc(aFeature, theExternal));
+}
+
+std::shared_ptr<SketchAPI_EllipticArc> SketchAPI_Sketch::addEllipticArc(
+ const std::string & theExternalName)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_EllipticArc::ID());
+ return EllipticArcPtr(new SketchAPI_EllipticArc(aFeature, theExternalName));
+}
+
+//--------------------------------------------------------------------------------------
+
+std::shared_ptr<SketchAPI_BSpline> SketchAPI_Sketch::addSpline(
+ const ModelHighAPI_Selection & external,
+ const int degree,
+ const std::list<std::shared_ptr<GeomAPI_Pnt2d> >& poles,
+ const std::list<ModelHighAPI_Double>& weights,
+ const std::list<ModelHighAPI_Double>& knots,
+ const std::list<ModelHighAPI_Integer>& multiplicities,
+ const bool periodic)
+{
+ FeaturePtr aFeature = compositeFeature()->addFeature(
+ periodic ? SketchPlugin_BSplinePeriodic::ID() : SketchPlugin_BSpline::ID());
+
+ BSplinePtr aBSpline(periodic ? new SketchAPI_BSplinePeriodic(aFeature)
+ : new SketchAPI_BSpline(aFeature));
+ if (external.variantType() != ModelHighAPI_Selection::VT_Empty)
+ aBSpline->setByExternal(external);
+ else if (knots.empty() || multiplicities.empty())
+ aBSpline->setByDegreePolesAndWeights(degree, poles, weights);
+ else
+ aBSpline->setByParameters(degree, poles, weights, knots, multiplicities);
+
+ return aBSpline;
+}
+
//--------------------------------------------------------------------------------------
std::shared_ptr<SketchAPI_Projection> SketchAPI_Sketch::addProjection(
- const ModelHighAPI_Selection & theExternalFeature)
+ const ModelHighAPI_Selection & theExternalFeature,
+ bool theKeepResult)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_Projection::ID());
- return ProjectionPtr(new SketchAPI_Projection(aFeature, theExternalFeature));
+ ProjectionPtr aProjection(new SketchAPI_Projection(aFeature, theExternalFeature));
+ aProjection->setIncludeToResult(theKeepResult);
+ return aProjection;
}
std::shared_ptr<SketchAPI_Projection> SketchAPI_Sketch::addProjection(
- const std::string & theExternalName)
+ const std::string & theExternalName,
+ bool theKeepResult)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_Projection::ID());
- return ProjectionPtr(new SketchAPI_Projection(aFeature, theExternalName));
+ ProjectionPtr aProjection(new SketchAPI_Projection(aFeature, theExternalName));
+ aProjection->setIncludeToResult(theKeepResult);
+ return aProjection;
}
//--------------------------------------------------------------------------------------
const ModelHighAPI_RefAttr & theCenter,
const ModelHighAPI_Double & theAngle,
const ModelHighAPI_Integer & theNumberOfObjects,
- bool theFullValue)
+ bool theFullValue,
+ bool theReversed)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_MultiRotation::ID());
return RotationPtr(
new SketchAPI_Rotation(aFeature, theObjects, theCenter,
- theAngle, theNumberOfObjects, theFullValue));
+ theAngle, theNumberOfObjects, theFullValue, theReversed));
}
//--------------------------------------------------------------------------------------
std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setAngle(
const ModelHighAPI_RefAttr & theLine1,
const ModelHighAPI_RefAttr & theLine2,
- const ModelHighAPI_Double & theValue)
+ const ModelHighAPI_Double & theValue,
+ const std::string& theType)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_ConstraintAngle::ID());
- fillAttribute(SketcherPrs_Tools::ANGLE_DIRECT,
- aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
- // fill the value before llines to avoid calculation of angle value by the Angle feature
- fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
+
+ const int aVersion = theType.empty() ? SketchPlugin_ConstraintAngle::THE_VERSION_0
+ : SketchPlugin_ConstraintAngle::THE_VERSION_1;
+ fillAttribute(aVersion, aFeature->integer(SketchPlugin_ConstraintAngle::VERSION_ID()));
+
+ int aType = (int)SketcherPrs_Tools::ANGLE_DIRECT;
+ fillAttribute(aType, aFeature->integer(SketchPlugin_ConstraintAngle::PREV_TYPE_ID()));
+ fillAttribute(aType, aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
+
+ if (aVersion == SketchPlugin_ConstraintAngle::THE_VERSION_0)
+ fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
+
fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
+
+ if (aVersion == SketchPlugin_ConstraintAngle::THE_VERSION_1) {
+ std::string aTypeLC = theType;
+ std::transform(aTypeLC.begin(), aTypeLC.end(), aTypeLC.begin(), ::tolower);
+ if (aTypeLC == "supplementary")
+ aType = (int)SketcherPrs_Tools::ANGLE_COMPLEMENTARY;
+ else if (aTypeLC == "backward")
+ aType = (int)SketcherPrs_Tools::ANGLE_BACKWARD;
+
+ fillAttribute(aType, aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
+ fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
+ }
+
aFeature->execute();
return InterfacePtr(new ModelHighAPI_Interface(aFeature));
}
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_ConstraintAngle::ID());
+ fillAttribute(SketchPlugin_ConstraintAngle::THE_VERSION_0,
+ aFeature->integer(SketchPlugin_ConstraintAngle::VERSION_ID()));
fillAttribute(SketcherPrs_Tools::ANGLE_COMPLEMENTARY,
aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
-// fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
aFeature->execute();
return InterfacePtr(new ModelHighAPI_Interface(aFeature));
}
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_ConstraintAngle::ID());
+ fillAttribute(SketchPlugin_ConstraintAngle::THE_VERSION_0,
+ aFeature->integer(SketchPlugin_ConstraintAngle::VERSION_ID()));
fillAttribute(SketcherPrs_Tools::ANGLE_BACKWARD,
aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
-// fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
aFeature->execute();
return InterfacePtr(new ModelHighAPI_Interface(aFeature));
}
std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setDistance(
const ModelHighAPI_RefAttr & thePoint,
const ModelHighAPI_RefAttr & thePointOrLine,
- const ModelHighAPI_Double & theValue)
+ const ModelHighAPI_Double & theValue,
+ bool isSigned)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_ConstraintDistance::ID());
fillAttribute(thePoint, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
fillAttribute(thePointOrLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
+ fillAttribute(isSigned, aFeature->boolean(SketchPlugin_ConstraintDistance::SIGNED()));
+ aFeature->execute();
+ return InterfacePtr(new ModelHighAPI_Interface(aFeature));
+}
+
+std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setSignedDistance(
+ const ModelHighAPI_RefAttr & thePoint,
+ const ModelHighAPI_RefAttr & thePointOrLine,
+ const ModelHighAPI_Double & theValue)
+{
+ return setDistance(thePoint, thePointOrLine, theValue, true);
+}
+
+std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setUnsignedDistance(
+ const ModelHighAPI_RefAttr & thePoint,
+ const ModelHighAPI_RefAttr & thePointOrLine,
+ const ModelHighAPI_Double & theValue)
+{
+ return setDistance(thePoint, thePointOrLine, theValue, false);
+}
+
+std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setHorizontalDistance(
+ const ModelHighAPI_RefAttr & thePoint1,
+ const ModelHighAPI_RefAttr & thePoint2,
+ const ModelHighAPI_Double & theValue)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_ConstraintDistanceHorizontal::ID());
+ fillAttribute(thePoint1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
+ fillAttribute(thePoint2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
+ fillAttribute(theValue,
+ aFeature->real(SketchPlugin_ConstraintDistanceAlongDir::DISTANCE_VALUE_ID()));
+ aFeature->execute();
+ return InterfacePtr(new ModelHighAPI_Interface(aFeature));
+}
+
+std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setVerticalDistance(
+ const ModelHighAPI_RefAttr & thePoint1,
+ const ModelHighAPI_RefAttr & thePoint2,
+ const ModelHighAPI_Double & theValue)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_ConstraintDistanceVertical::ID());
+ fillAttribute(thePoint1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
+ fillAttribute(thePoint2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
+ fillAttribute(theValue,
+ aFeature->real(SketchPlugin_ConstraintDistanceAlongDir::DISTANCE_VALUE_ID()));
aFeature->execute();
return InterfacePtr(new ModelHighAPI_Interface(aFeature));
}
//--------------------------------------------------------------------------------------
+static std::shared_ptr<GeomAPI_Pnt2d> pointCoordinates(const AttributePtr& thePoint)
+{
+ AttributePoint2DPtr aPnt = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(thePoint);
+ return aPnt ? aPnt->pnt() : std::shared_ptr<GeomAPI_Pnt2d>();
+}
+
+static std::shared_ptr<GeomAPI_Pnt2d> middlePointOnLine(const FeaturePtr& theFeature)
+{
+ AttributePoint2DPtr aStartAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ theFeature->attribute(SketchPlugin_Line::START_ID()));
+ AttributePoint2DPtr aEndAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ theFeature->attribute(SketchPlugin_Line::END_ID()));
+
+ if (!aStartAttr || !aEndAttr)
+ return std::shared_ptr<GeomAPI_Pnt2d>();
+
+ std::shared_ptr<GeomAPI_XY> aStartPoint = aStartAttr->pnt()->xy();
+ std::shared_ptr<GeomAPI_XY> aEndPoint = aEndAttr->pnt()->xy();
+ return std::shared_ptr<GeomAPI_Pnt2d>(
+ new GeomAPI_Pnt2d(aStartPoint->added(aEndPoint)->multiplied(0.5)));
+}
+
+static std::shared_ptr<GeomAPI_Pnt2d> pointOnCircle(const FeaturePtr& theFeature)
+{
+ AttributePoint2DPtr aCenter = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ theFeature->attribute(SketchPlugin_Circle::CENTER_ID()));
+ AttributeDoublePtr aRadius = theFeature->real(SketchPlugin_Circle::RADIUS_ID());
+
+ if (!aCenter || !aRadius)
+ return std::shared_ptr<GeomAPI_Pnt2d>();
+
+ return std::shared_ptr<GeomAPI_Pnt2d>(
+ new GeomAPI_Pnt2d(aCenter->x() + aRadius->value(), aCenter->y()));
+}
+
+static std::shared_ptr<GeomAPI_Pnt2d> middlePointOnArc(const FeaturePtr& theFeature)
+{
+ static const double PI = 3.141592653589793238463;
+
+ AttributePoint2DPtr aCenterAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ theFeature->attribute(SketchPlugin_Arc::CENTER_ID()));
+ AttributePoint2DPtr aStartAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ theFeature->attribute(SketchPlugin_Arc::START_ID()));
+ AttributePoint2DPtr aEndAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ theFeature->attribute(SketchPlugin_Arc::END_ID()));
+
+ if (!aCenterAttr || !aStartAttr || !aEndAttr)
+ return std::shared_ptr<GeomAPI_Pnt2d>();
+
+ std::shared_ptr<GeomAPI_Dir2d> aStartDir(new GeomAPI_Dir2d(
+ aStartAttr->x() - aCenterAttr->x(), aStartAttr->y() - aCenterAttr->y()));
+ std::shared_ptr<GeomAPI_Dir2d> aEndDir(new GeomAPI_Dir2d(
+ aEndAttr->x() - aCenterAttr->x(), aEndAttr->y() - aCenterAttr->y()));
+
+ double anAngle = aStartDir->angle(aEndDir);
+ bool isReversed = theFeature->boolean(SketchPlugin_Arc::REVERSED_ID())->value();
+ if (isReversed && anAngle > 0.)
+ anAngle -= 2.0 * PI;
+ else if (!isReversed && anAngle <= 0.)
+ anAngle += 2.0 * PI;
+
+ double cosA = cos(anAngle);
+ double sinA = sin(anAngle);
+
+ // rotate start dir to find middle point on arc
+ double aRadius = aStartAttr->pnt()->distance(aCenterAttr->pnt());
+ double x = aCenterAttr->x() + aRadius * (aStartDir->x() * cosA - aStartDir->y() * sinA);
+ double y = aCenterAttr->y() + aRadius * (aStartDir->x() * sinA + aStartDir->y() * cosA);
+
+ return std::shared_ptr<GeomAPI_Pnt2d>(new GeomAPI_Pnt2d(x, y));
+}
+
+static std::shared_ptr<GeomAPI_Pnt2d> pointOnEllipse(const FeaturePtr& theFeature,
+ bool isEllipse = true)
+{
+ const std::string& anAttrName = isEllipse ? SketchPlugin_Ellipse::MAJOR_AXIS_END_ID() :
+ SketchPlugin_EllipticArc::MAJOR_AXIS_END_ID();
+ AttributePoint2DPtr aMajorAxisEnd = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ theFeature->attribute(anAttrName));
+ return aMajorAxisEnd ? aMajorAxisEnd->pnt() : std::shared_ptr<GeomAPI_Pnt2d>();
+}
+
+static std::shared_ptr<GeomAPI_Pnt2d> middlePointOnBSpline(const FeaturePtr& theFeature,
+ const CompositeFeaturePtr& theSketch)
+{
+ GeomAPI_Edge anEdge(theFeature->lastResult()->shape());
+ GeomPointPtr aMiddle = anEdge.middlePoint();
+
+ std::shared_ptr<SketchPlugin_Sketch> aSketch =
+ std::dynamic_pointer_cast<SketchPlugin_Sketch>(theSketch);
+ return aSketch->to2D(aMiddle);
+}
+
+static std::shared_ptr<GeomAPI_Pnt2d> middlePoint(const ObjectPtr& theObject,
+ const CompositeFeaturePtr& theSketch)
+{
+ std::shared_ptr<GeomAPI_Pnt2d> aMiddlePoint;
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
+ if (aFeature) {
+ // move only features of the following types
+ const std::string& aFeatureKind = aFeature->getKind();
+ if (aFeatureKind == SketchPlugin_Point::ID())
+ aMiddlePoint = pointCoordinates(aFeature->attribute(SketchPlugin_Point::COORD_ID()));
+ else if (aFeatureKind == SketchPlugin_Line::ID())
+ aMiddlePoint = middlePointOnLine(aFeature);
+ else if (aFeatureKind == SketchPlugin_Circle::ID())
+ aMiddlePoint = pointOnCircle(aFeature);
+ else if (aFeatureKind == SketchPlugin_Arc::ID())
+ aMiddlePoint = middlePointOnArc(aFeature);
+ else if (aFeatureKind == SketchPlugin_Ellipse::ID())
+ aMiddlePoint = pointOnEllipse(aFeature);
+ else if (aFeatureKind == SketchPlugin_EllipticArc::ID())
+ aMiddlePoint = pointOnEllipse(aFeature, false);
+ else if (aFeatureKind == SketchPlugin_BSpline::ID() ||
+ aFeatureKind == SketchPlugin_BSplinePeriodic::ID())
+ aMiddlePoint = middlePointOnBSpline(aFeature, theSketch);
+ }
+ return aMiddlePoint;
+}
+
+void SketchAPI_Sketch::move(const ModelHighAPI_RefAttr& theMovedEntity,
+ const std::shared_ptr<GeomAPI_Pnt2d>& theTargetPoint)
+{
+ std::shared_ptr<ModelAPI_ObjectMovedMessage> aMessage(new ModelAPI_ObjectMovedMessage);
+ theMovedEntity.fillMessage(aMessage);
+
+ std::shared_ptr<GeomAPI_Pnt2d> anOriginalPosition;
+ if (aMessage->movedAttribute())
+ anOriginalPosition = pointCoordinates(aMessage->movedAttribute());
+ else
+ anOriginalPosition = middlePoint(aMessage->movedObject(), compositeFeature());
+
+ if (!anOriginalPosition)
+ return; // something has gone wrong, do not process movement
+
+ aMessage->setOriginalPosition(anOriginalPosition);
+ aMessage->setCurrentPosition(theTargetPoint);
+ Events_Loop::loop()->send(aMessage);
+}
+
+void SketchAPI_Sketch::move(const ModelHighAPI_RefAttr& theMovedEntity,
+ double theTargetX, double theTargetY)
+{
+ std::shared_ptr<GeomAPI_Pnt2d> aTargetPoint(new GeomAPI_Pnt2d(theTargetX, theTargetY));
+ move(theMovedEntity, aTargetPoint);
+}
+
+//--------------------------------------------------------------------------------------
+
std::shared_ptr<GeomAPI_Pnt2d> SketchAPI_Sketch::to2D(const std::shared_ptr<GeomAPI_Pnt>& thePoint)
{
FeaturePtr aBase = feature();
//--------------------------------------------------------------------------------------
+static bool isDifferent(GeomFacePtr theFace1, GeomFacePtr theFace2)
+{
+ // collect edges of the first face
+ std::list<GeomShapePtr> anEdges1;
+ for (GeomAPI_ShapeExplorer anExp(theFace1, GeomAPI_Shape::EDGE); anExp.more(); anExp.next())
+ anEdges1.push_back(anExp.current());
+ // compare edges of faces
+ for (GeomAPI_ShapeExplorer anExp(theFace2, GeomAPI_Shape::EDGE); anExp.more(); anExp.next()) {
+ GeomShapePtr aCurrent = anExp.current();
+ bool isFound = false;
+ std::list<GeomShapePtr>::iterator anIt1 = anEdges1.begin();
+ for (; anIt1 != anEdges1.end(); ++anIt1)
+ if (aCurrent->isSameGeometry(*anIt1)) {
+ isFound = true;
+ anEdges1.erase(anIt1);
+ break;
+ }
+ if (!isFound)
+ return true;
+ }
+ return !anEdges1.empty();
+}
+
+static bool isCustomFacesOrder(CompositeFeaturePtr theSketch)
+{
+ ResultConstructionPtr aSketchResult =
+ std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(theSketch->lastResult());
+ if (!aSketchResult)
+ return false;
+
+ std::shared_ptr<GeomAPI_PlanarEdges> aWires =
+ std::dynamic_pointer_cast<GeomAPI_PlanarEdges>(aSketchResult->shape());
+ if (!aWires)
+ return false;
+
+ // collect faces constructed by SketchBuilder algorithm
+ GeomAlgoAPI_SketchBuilder aSketchBuilder(aWires->origin(), aWires->dirX(),
+ aWires->norm(), aWires);
+ const ListOfShape& aFaces = aSketchBuilder.faces();
+
+ // compare faces stored in sketch with faces generated by SketchBuilder
+ int aNbSketchFaces = aSketchResult->facesNum();
+ int aFaceIndex = 0;
+ for (ListOfShape::const_iterator aFIt = aFaces.begin();
+ aFIt != aFaces.end() && aFaceIndex < aNbSketchFaces;
+ ++aFIt, ++aFaceIndex) {
+ GeomFacePtr aSketchFace = aSketchResult->face(aFaceIndex);
+ GeomFacePtr aCurFace = (*aFIt)->face();
+ if (isDifferent(aSketchFace, aCurFace))
+ return true;
+ }
+ return false;
+}
+
+static void edgesOfSketchFaces(CompositeFeaturePtr theSketch,
+ std::list<std::list<ResultPtr> >& theEdges)
+{
+ ResultConstructionPtr aSketchResult =
+ std::dynamic_pointer_cast<ModelAPI_ResultConstruction>(theSketch->lastResult());
+ if (!aSketchResult)
+ return;
+
+ // collect curves of the sketch
+ std::map<GeomCurvePtr, ResultPtr, GeomAPI_Curve::Comparator> aCurves;
+ int aSubNum = theSketch->numberOfSubs();
+ for (int a = 0; a < aSubNum; ++a) {
+ FeaturePtr aSub = theSketch->subFeature(a);
+ const std::list<ResultPtr>& aResults = aSub->results();
+ std::list<ResultPtr>::const_iterator aRes = aResults.cbegin();
+ for (; aRes != aResults.cend(); aRes++) {
+ GeomShapePtr aCurShape = (*aRes)->shape();
+ if (aCurShape && aCurShape->isEdge())
+ aCurves[untrimmedCurve(aCurShape)] = *aRes;
+ }
+ }
+
+ // convert each face to the list of results of its edges
+ int aFacesNum = aSketchResult->facesNum();
+ for (int a = 0; a < aFacesNum; ++a) {
+ theEdges.push_back(std::list<ResultPtr>());
+ std::list<ResultPtr>& aCurEdges = theEdges.back();
+
+ GeomFacePtr aFace = aSketchResult->face(a);
+ for (GeomAPI_ShapeExplorer anExp(aFace, GeomAPI_Shape::EDGE);
+ anExp.more(); anExp.next()) {
+ GeomCurvePtr aCurrent = untrimmedCurve(anExp.current());
+ aCurEdges.push_back(aCurves[aCurrent]);
+ }
+ }
+}
+
+//--------------------------------------------------------------------------------------
+
void SketchAPI_Sketch::dump(ModelHighAPI_Dumper& theDumper) const
{
FeaturePtr aBase = feature();
// dump sketch's subfeatures
CompositeFeaturePtr aCompFeat = std::dynamic_pointer_cast<ModelAPI_CompositeFeature>(aBase);
theDumper.processSubs(aCompFeat, true);
+
+ // if face order differs to the order generated by SketchBuilder,
+ // dump the list of faces for correct execution of the script
+ if (isCustomFacesOrder(aCompFeat)) {
+ std::list<std::list<ResultPtr> > aFaces;
+ edgesOfSketchFaces(aCompFeat, aFaces);
+
+ const std::string& aSketchName = theDumper.name(aBase);
+ std::string aMethodName(".changeFacesOrder");
+ std::string aSpaceShift(aSketchName.size() + aMethodName.size(), ' ');
+
+ theDumper << aSketchName << aMethodName << "([";
+ for (std::list<std::list<ResultPtr> >::iterator aFIt = aFaces.begin();
+ aFIt != aFaces.end(); ++aFIt) {
+ if (aFIt != aFaces.begin())
+ theDumper << ",\n" << aSpaceShift << " ";
+ theDumper << *aFIt;
+ }
+ theDumper << "\n" << aSpaceShift << " ])" << std::endl;
+ // call model.do() for correct update of the document's labels related to the changed faces
+ theDumper << "model.do()" << std::endl;
+ }
}