-// Copyright (C) 2014-20xx CEA/DEN, EDF R&D
-// Name : SketchAPI_Sketch.cpp
-// Purpose:
+// Copyright (C) 2014-2017 CEA/DEN, EDF R&D
+//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License, or (at your option) any later version.
+//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// See http://www.salome-platform.org/ or
+// email : webmaster.salome@opencascade.com<mailto:webmaster.salome@opencascade.com>
//
-// History:
-// 07/06/16 - Sergey POKHODENKO - Creation of the file
-//--------------------------------------------------------------------------------------
#include "SketchAPI_Sketch.h"
//--------------------------------------------------------------------------------------
#include <SketchPlugin_Constraint.h>
#include <SketchPlugin_ConstraintCoincidence.h>
#include <SketchPlugin_ConstraintCollinear.h>
#include <SketchPlugin_ConstraintDistance.h>
+#include <SketchPlugin_ConstraintDistanceHorizontal.h>
+#include <SketchPlugin_ConstraintDistanceVertical.h>
#include <SketchPlugin_ConstraintEqual.h>
-#include <SketchPlugin_ConstraintFillet.h>
+#include <SketchPlugin_Fillet.h>
#include <SketchPlugin_ConstraintHorizontal.h>
#include <SketchPlugin_ConstraintLength.h>
#include <SketchPlugin_ConstraintMiddle.h>
#include <SketchPlugin_ConstraintPerpendicular.h>
#include <SketchPlugin_ConstraintRadius.h>
#include <SketchPlugin_ConstraintRigid.h>
-#include <SketchPlugin_ConstraintSplit.h>
+#include <SketchPlugin_Trim.h>
+#include <SketchPlugin_Split.h>
#include <SketchPlugin_ConstraintTangent.h>
#include <SketchPlugin_ConstraintVertical.h>
#include <SketcherPrs_Tools.h>
//--------------------------------------------------------------------------------------
+#include <ModelAPI_Events.h>
#include <ModelAPI_CompositeFeature.h>
#include <ModelAPI_ResultConstruction.h>
+#include <ModelHighAPI_Double.h>
#include <ModelHighAPI_Dumper.h>
#include <ModelHighAPI_RefAttr.h>
#include <ModelHighAPI_Selection.h>
#include <ModelHighAPI_Tools.h>
//--------------------------------------------------------------------------------------
#include "SketchAPI_Arc.h"
+#include "SketchAPI_MacroArc.h"
#include "SketchAPI_Circle.h"
#include "SketchAPI_IntersectionPoint.h"
#include "SketchAPI_Line.h"
+#include "SketchAPI_MacroCircle.h"
#include "SketchAPI_Mirror.h"
#include "SketchAPI_Point.h"
#include "SketchAPI_Projection.h"
#include "SketchAPI_Rotation.h"
#include "SketchAPI_Translation.h"
//--------------------------------------------------------------------------------------
+#include <GeomAPI_Dir2d.h>
+#include <GeomAPI_XY.h>
+#include <cmath>
+//--------------------------------------------------------------------------------------
SketchAPI_Sketch::SketchAPI_Sketch(
const std::shared_ptr<ModelAPI_Feature> & theFeature)
: ModelHighAPI_Interface(theFeature)
//--------------------------------------------------------------------------------------
std::shared_ptr<SketchAPI_IntersectionPoint> SketchAPI_Sketch::addIntersectionPoint(
- const ModelHighAPI_Selection & theExternal)
+ const ModelHighAPI_Selection & theExternal,
+ bool theKeepResult)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_IntersectionPoint::ID());
- return IntersectionPointPtr(new SketchAPI_IntersectionPoint(aFeature, theExternal));
+ IntersectionPointPtr anIntersection(new SketchAPI_IntersectionPoint(aFeature, theExternal));
+ anIntersection->setIncludeToResult(theKeepResult);
+ return anIntersection;
}
std::shared_ptr<SketchAPI_IntersectionPoint> SketchAPI_Sketch::addIntersectionPoint(
- const std::string & theExternalName)
+ const std::string & theExternalName,
+ bool theKeepResult)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_IntersectionPoint::ID());
- return IntersectionPointPtr(new SketchAPI_IntersectionPoint(aFeature, theExternalName));
+ IntersectionPointPtr anIntersection(new SketchAPI_IntersectionPoint(aFeature, theExternalName));
+ anIntersection->setIncludeToResult(theKeepResult);
+ return anIntersection;
}
//--------------------------------------------------------------------------------------
return CirclePtr(new SketchAPI_Circle(aFeature, theCenter, theRadius));
}
-std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(double theX1, double theY1,
- double theX2, double theY2,
- double theX3, double theY3)
+std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(double theCenterX,
+ double theCenterY,
+ double thePassedX,
+ double thePassedY)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
- compositeFeature()->addFeature(SketchPlugin_Circle::ID());
- return CirclePtr(new SketchAPI_Circle(aFeature, theX1, theY1, theX2, theY2, theX3, theY3));
+ compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
+ return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, theCenterX, theCenterY,
+ thePassedX, thePassedY));
}
-std::shared_ptr<SketchAPI_Circle> SketchAPI_Sketch::addCircle(
- const std::shared_ptr<GeomAPI_Pnt2d>& thePoint1,
- const std::shared_ptr<GeomAPI_Pnt2d>& thePoint2,
- const std::shared_ptr<GeomAPI_Pnt2d>& thePoint3)
+std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(
+ const std::shared_ptr<GeomAPI_Pnt2d>& theCenterPoint,
+ const std::shared_ptr<GeomAPI_Pnt2d>& thePassedPoint)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
- compositeFeature()->addFeature(SketchPlugin_Circle::ID());
- return CirclePtr(new SketchAPI_Circle(aFeature, thePoint1, thePoint2, thePoint3));
+ compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
+ return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, theCenterPoint, thePassedPoint));
+}
+
+std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(double theX1, double theY1,
+ double theX2, double theY2,
+ double theX3, double theY3)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
+ return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, theX1, theY1,
+ theX2, theY2,
+ theX3, theY3));
+}
+
+std::shared_ptr<SketchAPI_MacroCircle> SketchAPI_Sketch::addCircle(
+ const std::shared_ptr<GeomAPI_Pnt2d>& thePoint1,
+ const std::shared_ptr<GeomAPI_Pnt2d>& thePoint2,
+ const std::shared_ptr<GeomAPI_Pnt2d>& thePoint3)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_MacroCircle::ID());
+ return MacroCirclePtr(new SketchAPI_MacroCircle(aFeature, thePoint1, thePoint2, thePoint3));
}
std::shared_ptr<SketchAPI_Circle>
return ArcPtr(new SketchAPI_Arc(aFeature, theCenter, theStart, theEnd, theInversed));
}
-std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(double theStartX, double theStartY,
+std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(double theStartX, double theStartY,
double theEndX, double theEndY,
double thePassedX, double thePassedY)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
- compositeFeature()->addFeature(SketchPlugin_Arc::ID());
- return ArcPtr(new SketchAPI_Arc(aFeature,
- theStartX, theStartY,
- theEndX, theEndY,
- thePassedX, thePassedY));
+ compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
+ return MacroArcPtr(new SketchAPI_MacroArc(aFeature,
+ theStartX, theStartY,
+ theEndX, theEndY,
+ thePassedX, thePassedY));
}
-std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(
+std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
const std::shared_ptr<GeomAPI_Pnt2d>& theStart,
const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
const std::shared_ptr<GeomAPI_Pnt2d>& thePassed)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
- compositeFeature()->addFeature(SketchPlugin_Arc::ID());
- return ArcPtr(new SketchAPI_Arc(aFeature, theStart, theEnd, thePassed));
+ compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
+ return MacroArcPtr(new SketchAPI_MacroArc(aFeature, theStart, theEnd, thePassed));
}
-std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(
+std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
const ModelHighAPI_RefAttr& theTangentPoint,
double theEndX, double theEndY,
bool theInversed)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
- compositeFeature()->addFeature(SketchPlugin_Arc::ID());
- return ArcPtr(new SketchAPI_Arc(aFeature, theTangentPoint, theEndX, theEndY, theInversed));
+ compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
+ return MacroArcPtr(new SketchAPI_MacroArc(
+ aFeature, theTangentPoint, theEndX, theEndY, theInversed));
}
-std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(
+std::shared_ptr<SketchAPI_MacroArc> SketchAPI_Sketch::addArc(
const ModelHighAPI_RefAttr& theTangentPoint,
const std::shared_ptr<GeomAPI_Pnt2d>& theEnd,
bool theInversed)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
- compositeFeature()->addFeature(SketchPlugin_Arc::ID());
- return ArcPtr(new SketchAPI_Arc(aFeature, theTangentPoint, theEnd, theInversed));
+ compositeFeature()->addFeature(SketchPlugin_MacroArc::ID());
+ return MacroArcPtr(new SketchAPI_MacroArc(aFeature, theTangentPoint, theEnd, theInversed));
}
std::shared_ptr<SketchAPI_Arc> SketchAPI_Sketch::addArc(const ModelHighAPI_Selection & theExternal)
//--------------------------------------------------------------------------------------
std::shared_ptr<SketchAPI_Projection> SketchAPI_Sketch::addProjection(
- const ModelHighAPI_Selection & theExternalFeature)
+ const ModelHighAPI_Selection & theExternalFeature,
+ bool theKeepResult)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_Projection::ID());
- return ProjectionPtr(new SketchAPI_Projection(aFeature, theExternalFeature));
+ ProjectionPtr aProjection(new SketchAPI_Projection(aFeature, theExternalFeature));
+ aProjection->setIncludeToResult(theKeepResult);
+ return aProjection;
}
std::shared_ptr<SketchAPI_Projection> SketchAPI_Sketch::addProjection(
- const std::string & theExternalName)
+ const std::string & theExternalName,
+ bool theKeepResult)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_Projection::ID());
- return ProjectionPtr(new SketchAPI_Projection(aFeature, theExternalName));
+ ProjectionPtr aProjection(new SketchAPI_Projection(aFeature, theExternalName));
+ aProjection->setIncludeToResult(theKeepResult);
+ return aProjection;
}
//--------------------------------------------------------------------------------------
const ModelHighAPI_RefAttr & theCenter,
const ModelHighAPI_Double & theAngle,
const ModelHighAPI_Integer & theNumberOfObjects,
- bool theFullValue)
+ bool theFullValue,
+ bool theReversed)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_MultiRotation::ID());
return RotationPtr(
new SketchAPI_Rotation(aFeature, theObjects, theCenter,
- theAngle, theNumberOfObjects, theFullValue));
+ theAngle, theNumberOfObjects, theFullValue, theReversed));
}
//--------------------------------------------------------------------------------------
std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::addSplit(
- const ModelHighAPI_Reference& theFeature,
- const ModelHighAPI_RefAttr& thePoint1,
- const ModelHighAPI_RefAttr& thePoint2)
+ const ModelHighAPI_Reference& theFeature,
+ const std::shared_ptr<GeomAPI_Pnt2d>& thePositionPoint)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
- compositeFeature()->addFeature(SketchPlugin_ConstraintSplit::ID());
- fillAttribute(theFeature, aFeature->reference(SketchPlugin_Constraint::VALUE()));
- fillAttribute(thePoint1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
- fillAttribute(thePoint2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
- //aFeature->execute();
+ compositeFeature()->addFeature(SketchPlugin_Split::ID());
+ fillAttribute(theFeature, aFeature->reference(SketchPlugin_Split::SELECTED_OBJECT()));
+
+ AttributePtr anAttribute = aFeature->attribute(SketchPlugin_Split::SELECTED_POINT());
+ if (anAttribute->attributeType() == GeomDataAPI_Point2D::typeId()) {
+ AttributePoint2DPtr aPointAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(anAttribute);
+ fillAttribute(thePositionPoint, aPointAttr);
+ }
+
+ return InterfacePtr(new ModelHighAPI_Interface(aFeature));
+}
+
+//--------------------------------------------------------------------------------------
+std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::addTrim(
+ const ModelHighAPI_Reference& theFeature,
+ const std::shared_ptr<GeomAPI_Pnt2d>& thePositionPoint)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_Trim::ID());
+ fillAttribute(theFeature, aFeature->reference(SketchPlugin_Trim::SELECTED_OBJECT()));
+
+ AttributePtr anAttribute = aFeature->attribute(SketchPlugin_Trim::SELECTED_POINT());
+ if (anAttribute->attributeType() == GeomDataAPI_Point2D::typeId()) {
+ AttributePoint2DPtr aPointAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(anAttribute);
+ fillAttribute(thePositionPoint, aPointAttr);
+ }
+
return InterfacePtr(new ModelHighAPI_Interface(aFeature));
}
fillAttribute(SketcherPrs_Tools::ANGLE_DIRECT,
aFeature->integer(SketchPlugin_ConstraintAngle::TYPE_ID()));
// fill the value before llines to avoid calculation of angle value by the Angle feature
- fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
+ fillAttribute(theValue, aFeature->real(SketchPlugin_ConstraintAngle::ANGLE_VALUE_ID()));
fillAttribute(theLine1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
fillAttribute(theLine2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
aFeature->execute();
std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setDistance(
const ModelHighAPI_RefAttr & thePoint,
const ModelHighAPI_RefAttr & thePointOrLine,
- const ModelHighAPI_Double & theValue)
+ const ModelHighAPI_Double & theValue,
+ bool isSigned)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
compositeFeature()->addFeature(SketchPlugin_ConstraintDistance::ID());
fillAttribute(thePoint, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
fillAttribute(thePointOrLine, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
fillAttribute(theValue, aFeature->real(SketchPlugin_Constraint::VALUE()));
+ fillAttribute(isSigned, aFeature->boolean(SketchPlugin_ConstraintDistance::SIGNED()));
+ aFeature->execute();
+ return InterfacePtr(new ModelHighAPI_Interface(aFeature));
+}
+
+std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setSignedDistance(
+ const ModelHighAPI_RefAttr & thePoint,
+ const ModelHighAPI_RefAttr & thePointOrLine,
+ const ModelHighAPI_Double & theValue)
+{
+ return setDistance(thePoint, thePointOrLine, theValue, true);
+}
+
+std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setUnsignedDistance(
+ const ModelHighAPI_RefAttr & thePoint,
+ const ModelHighAPI_RefAttr & thePointOrLine,
+ const ModelHighAPI_Double & theValue)
+{
+ return setDistance(thePoint, thePointOrLine, theValue, false);
+}
+
+std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setHorizontalDistance(
+ const ModelHighAPI_RefAttr & thePoint1,
+ const ModelHighAPI_RefAttr & thePoint2,
+ const ModelHighAPI_Double & theValue)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_ConstraintDistanceHorizontal::ID());
+ fillAttribute(thePoint1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
+ fillAttribute(thePoint2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
+ fillAttribute(theValue,
+ aFeature->real(SketchPlugin_ConstraintDistanceAlongDir::DISTANCE_VALUE_ID()));
+ aFeature->execute();
+ return InterfacePtr(new ModelHighAPI_Interface(aFeature));
+}
+
+std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setVerticalDistance(
+ const ModelHighAPI_RefAttr & thePoint1,
+ const ModelHighAPI_RefAttr & thePoint2,
+ const ModelHighAPI_Double & theValue)
+{
+ std::shared_ptr<ModelAPI_Feature> aFeature =
+ compositeFeature()->addFeature(SketchPlugin_ConstraintDistanceVertical::ID());
+ fillAttribute(thePoint1, aFeature->refattr(SketchPlugin_Constraint::ENTITY_A()));
+ fillAttribute(thePoint2, aFeature->refattr(SketchPlugin_Constraint::ENTITY_B()));
+ fillAttribute(theValue,
+ aFeature->real(SketchPlugin_ConstraintDistanceAlongDir::DISTANCE_VALUE_ID()));
aFeature->execute();
return InterfacePtr(new ModelHighAPI_Interface(aFeature));
}
}
std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setFillet(
- const std::list<ModelHighAPI_RefAttr> & thePoints,
- const ModelHighAPI_Double & theRadius)
+ const ModelHighAPI_RefAttr & thePoint)
{
std::shared_ptr<ModelAPI_Feature> aFeature =
- compositeFeature()->addFeature(SketchPlugin_ConstraintFillet::ID());
- fillAttribute(thePoints, aFeature->data()->refattrlist(SketchPlugin_Constraint::ENTITY_A()));
- fillAttribute(theRadius, aFeature->real(SketchPlugin_Constraint::VALUE()));
- aFeature->execute();
+ compositeFeature()->addFeature(SketchPlugin_Fillet::ID());
+ fillAttribute(thePoint, aFeature->data()->refattr(SketchPlugin_Fillet::FILLET_POINT_ID()));
+ apply(); // finish operation to remove Fillet feature correcly
return InterfacePtr(new ModelHighAPI_Interface(aFeature));
}
+std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setFilletWithRadius(
+ const ModelHighAPI_RefAttr & thePoint,
+ const ModelHighAPI_Double & theRadius)
+{
+ CompositeFeaturePtr aSketch = compositeFeature();
+ int aNbSubs = aSketch->numberOfSubs();
+
+ // create fillet
+ InterfacePtr aFilletFeature = setFillet(thePoint);
+
+ // set radius for just created arc
+ FeaturePtr anArc = aSketch->subFeature(aNbSubs - 1);
+ if (anArc->getKind() == SketchPlugin_Arc::ID())
+ setRadius(ModelHighAPI_RefAttr(ObjectPtr(anArc->lastResult())), ModelHighAPI_Double(theRadius));
+
+ return aFilletFeature;
+}
+
std::shared_ptr<ModelHighAPI_Interface> SketchAPI_Sketch::setFixed(
const ModelHighAPI_RefAttr & theObject)
{
//--------------------------------------------------------------------------------------
+static std::shared_ptr<GeomAPI_Pnt2d> pointCoordinates(const AttributePtr& thePoint)
+{
+ AttributePoint2DPtr aPnt = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(thePoint);
+ if (aPnt)
+ return aPnt->pnt();
+ return std::shared_ptr<GeomAPI_Pnt2d>();
+}
+
+static std::shared_ptr<GeomAPI_Pnt2d> middlePointOnLine(const FeaturePtr& theFeature)
+{
+ AttributePoint2DPtr aStartAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ theFeature->attribute(SketchPlugin_Line::START_ID()));
+ AttributePoint2DPtr aEndAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ theFeature->attribute(SketchPlugin_Line::END_ID()));
+
+ if (!aStartAttr || !aEndAttr)
+ return std::shared_ptr<GeomAPI_Pnt2d>();
+
+ std::shared_ptr<GeomAPI_XY> aStartPoint = aStartAttr->pnt()->xy();
+ std::shared_ptr<GeomAPI_XY> aEndPoint = aEndAttr->pnt()->xy();
+ return std::shared_ptr<GeomAPI_Pnt2d>(
+ new GeomAPI_Pnt2d(aStartPoint->added(aEndPoint)->multiplied(0.5)));
+}
+
+static std::shared_ptr<GeomAPI_Pnt2d> pointOnCircle(const FeaturePtr& theFeature)
+{
+ AttributePoint2DPtr aCenter = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ theFeature->attribute(SketchPlugin_Circle::CENTER_ID()));
+ AttributeDoublePtr aRadius = theFeature->real(SketchPlugin_Circle::RADIUS_ID());
+
+ if (!aCenter || !aRadius)
+ return std::shared_ptr<GeomAPI_Pnt2d>();
+
+ return std::shared_ptr<GeomAPI_Pnt2d>(
+ new GeomAPI_Pnt2d(aCenter->x() + aRadius->value(), aCenter->y()));
+}
+
+static std::shared_ptr<GeomAPI_Pnt2d> middlePointOnArc(const FeaturePtr& theFeature)
+{
+ static const double PI = 3.141592653589793238463;
+
+ AttributePoint2DPtr aCenterAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ theFeature->attribute(SketchPlugin_Arc::CENTER_ID()));
+ AttributePoint2DPtr aStartAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ theFeature->attribute(SketchPlugin_Arc::START_ID()));
+ AttributePoint2DPtr aEndAttr = std::dynamic_pointer_cast<GeomDataAPI_Point2D>(
+ theFeature->attribute(SketchPlugin_Arc::END_ID()));
+
+ if (!aCenterAttr || !aStartAttr || !aEndAttr)
+ return std::shared_ptr<GeomAPI_Pnt2d>();
+
+ std::shared_ptr<GeomAPI_Dir2d> aStartDir(new GeomAPI_Dir2d(
+ aStartAttr->x() - aCenterAttr->x(), aStartAttr->y() - aCenterAttr->y()));
+ std::shared_ptr<GeomAPI_Dir2d> aEndDir(new GeomAPI_Dir2d(
+ aEndAttr->x() - aCenterAttr->x(), aEndAttr->y() - aCenterAttr->y()));
+
+ double anAngle = aStartDir->angle(aEndDir);
+ bool isReversed = theFeature->boolean(SketchPlugin_Arc::REVERSED_ID())->value();
+ if (isReversed && anAngle > 0.)
+ anAngle -= 2.0 * PI;
+ else if (!isReversed && anAngle <= 0.)
+ anAngle += 2.0 * PI;
+
+ double cosA = cos(anAngle);
+ double sinA = sin(anAngle);
+
+ // rotate start dir to find middle point on arc
+ double aRadius = aStartAttr->pnt()->distance(aCenterAttr->pnt());
+ double x = aCenterAttr->x() + aRadius * (aStartDir->x() * cosA - aStartDir->y() * sinA);
+ double y = aCenterAttr->y() + aRadius * (aStartDir->x() * sinA + aStartDir->y() * cosA);
+
+ return std::shared_ptr<GeomAPI_Pnt2d>(new GeomAPI_Pnt2d(x, y));
+}
+
+static std::shared_ptr<GeomAPI_Pnt2d> middlePoint(const ObjectPtr& theObject)
+{
+ FeaturePtr aFeature = ModelAPI_Feature::feature(theObject);
+ if (aFeature) {
+ const std::string& aFeatureKind = aFeature->getKind();
+ if (aFeatureKind == SketchPlugin_Point::ID())
+ return pointCoordinates(aFeature->attribute(SketchPlugin_Point::COORD_ID()));
+ else if (aFeatureKind == SketchPlugin_Line::ID())
+ return middlePointOnLine(aFeature);
+ else if (aFeatureKind == SketchPlugin_Circle::ID())
+ return pointOnCircle(aFeature);
+ else if (aFeatureKind == SketchPlugin_Arc::ID())
+ return middlePointOnArc(aFeature);
+ }
+ // do not move other types of features
+ return std::shared_ptr<GeomAPI_Pnt2d>();
+}
+
+void SketchAPI_Sketch::move(const ModelHighAPI_RefAttr& theMovedEntity,
+ const std::shared_ptr<GeomAPI_Pnt2d>& theTargetPoint)
+{
+ std::shared_ptr<ModelAPI_ObjectMovedMessage> aMessage(new ModelAPI_ObjectMovedMessage);
+ theMovedEntity.fillMessage(aMessage);
+
+ std::shared_ptr<GeomAPI_Pnt2d> anOriginalPosition;
+ if (aMessage->movedAttribute())
+ anOriginalPosition = pointCoordinates(aMessage->movedAttribute());
+ else
+ anOriginalPosition = middlePoint(aMessage->movedObject());
+
+ if (!anOriginalPosition)
+ return; // something has gone wrong, do not process movement
+
+ aMessage->setOriginalPosition(anOriginalPosition);
+ aMessage->setCurrentPosition(theTargetPoint);
+ Events_Loop::loop()->send(aMessage);
+}
+
+void SketchAPI_Sketch::move(const ModelHighAPI_RefAttr& theMovedEntity,
+ double theTargetX, double theTargetY)
+{
+ std::shared_ptr<GeomAPI_Pnt2d> aTargetPoint(new GeomAPI_Pnt2d(theTargetX, theTargetY));
+ move(theMovedEntity, aTargetPoint);
+}
+
+//--------------------------------------------------------------------------------------
+
+std::shared_ptr<GeomAPI_Pnt2d> SketchAPI_Sketch::to2D(const std::shared_ptr<GeomAPI_Pnt>& thePoint)
+{
+ FeaturePtr aBase = feature();
+ std::shared_ptr<GeomDataAPI_Point> aC = std::dynamic_pointer_cast<GeomDataAPI_Point>(
+ aBase->attribute(SketchPlugin_Sketch::ORIGIN_ID()));
+ std::shared_ptr<GeomDataAPI_Dir> aNorm = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ aBase->attribute(SketchPlugin_Sketch::NORM_ID()));
+ std::shared_ptr<GeomDataAPI_Dir> aX = std::dynamic_pointer_cast<GeomDataAPI_Dir>(
+ aBase->attribute(SketchPlugin_Sketch::DIRX_ID()));
+ std::shared_ptr<GeomAPI_Dir> aY(new GeomAPI_Dir(aNorm->dir()->cross(aX->dir())));
+
+ return thePoint->to2D(aC->pnt(), aX->dir(), aY);
+}
+
+//--------------------------------------------------------------------------------------
+
void SketchAPI_Sketch::dump(ModelHighAPI_Dumper& theDumper) const
{
FeaturePtr aBase = feature();
// Check the plane is coordinate plane
std::string aPlaneName = defaultPlane(anOrigin, aNormal, aDirX);
- if (anExternal->context()) { // checking for selected planes
- if (!aPlaneName.empty()) {
+ if(anExternal->context()) { // checking for selected planes
+ if (!aPlaneName.empty()
+ && anExternal->context()->data()
+ && anExternal->context()->data()->name() == aPlaneName) {
// dump sketch based on coordinate plane
theDumper << aBase << " = model.addSketch(" << aDocName
<< ", model.standardPlane(\"" << aPlaneName << "\"))" << std::endl;