# -*- coding: iso-8859-1 -*-
-# Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+# Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
#
# Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
# CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
# This library is free software; you can redistribute it and/or
# modify it under the terms of the GNU Lesser General Public
# License as published by the Free Software Foundation; either
-# version 2.1 of the License.
+# version 2.1 of the License, or (at your option) any later version.
#
# This library is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# Author : Sergey LITONIN
# Module : SMESH
#
-import smesh
+import salome
import SMESH_mechanic
-salome = smesh.salome
-mesh = SMESH_mechanic.mesh
-
+import SMESH, SALOMEDS
+from salome.smesh import smeshBuilder
+smesh = smeshBuilder.New()
+mesh = SMESH_mechanic.mesh
# ---- Criterion : AREA > 100
# create group
-aGroup = mesh.MakeGroup("Area > 100", smesh.FACE, smesh.FT_Area, smesh.FT_MoreThan, 100)
+aGroup = mesh.MakeGroup("Area > 100", SMESH.FACE, SMESH.FT_Area, SMESH.FT_MoreThan, 100)
# print result
anIds = aGroup.GetIDs()
-print "Criterion: Area > 100 Nb = ", len( anIds )
+print("Criterion: Area > 100 Nb = ", len( anIds ))
#for i in range( len( anIds ) ):
#print anIds[ i ]
# ---- Criterion : Taper > 3e-15
# create group
-aGroup = mesh.MakeGroup("Taper > 3e-15", smesh.FACE, smesh.FT_Taper, smesh.FT_MoreThan, 3e-15)
+aGroup = mesh.MakeGroup("Taper > 3e-15", SMESH.FACE, SMESH.FT_Taper, SMESH.FT_MoreThan, 3e-15)
# print result
anIds = aGroup.GetIDs()
-print "Criterion: Taper > 3e-15 Nb = ", len( anIds )
+print("Criterion: Taper > 3e-15 Nb = ", len( anIds ))
#for i in range( len( anIds ) ):
#print anIds[ i ]
# ---- Criterion : ASPECT RATIO > 1.3
# create group
-aGroup = mesh.MakeGroup("Aspect Ratio > 1.3", smesh.FACE, smesh.FT_AspectRatio, smesh.FT_MoreThan, 1.3)
+aGroup = mesh.MakeGroup("Aspect Ratio > 1.3", SMESH.FACE, SMESH.FT_AspectRatio, SMESH.FT_MoreThan, 1.3)
# print result
anIds = aGroup.GetIDs()
-print "Criterion: Aspect Ratio > 1.3 Nb = ", len( anIds )
+print("Criterion: Aspect Ratio > 1.3 Nb = ", len( anIds ))
#for i in range( len( anIds ) ):
#print anIds[ i ]
# ---- Criterion : MINIMUM ANGLE < 30
# create group
-aGroup = mesh.MakeGroup("Minimum Angle < 30", smesh.FACE, smesh.FT_MinimumAngle, smesh.FT_LessThan, 30)
+aGroup = mesh.MakeGroup("Minimum Angle < 30", SMESH.FACE, SMESH.FT_MinimumAngle, SMESH.FT_LessThan, 30)
# print result
anIds = aGroup.GetIDs()
-print "Criterion: Minimum Angle < 30 Nb = ", len( anIds )
+print("Criterion: Minimum Angle < 30 Nb = ", len( anIds ))
#for i in range( len( anIds ) ):
#print anIds[ i ]
# ---- Criterion : Warp > 2e-13
# create group
-aGroup = mesh.MakeGroup("Warp > 2e-13", smesh.FACE, smesh.FT_Warping, smesh.FT_MoreThan, 2e-13 )
+aGroup = mesh.MakeGroup("Warp > 2e-13", SMESH.FACE, SMESH.FT_Warping, SMESH.FT_MoreThan, 2e-13 )
# print result
anIds = aGroup.GetIDs()
-print "Criterion: Warp > 2e-13 Nb = ", len( anIds )
+print("Criterion: Warp > 2e-13 Nb = ", len( anIds ))
#for i in range( len( anIds ) ):
#print anIds[ i ]
# ---- Criterion : Skew > 18
# create group
-aGroup = mesh.MakeGroup("Skew > 18", smesh.FACE, smesh.FT_Skew, smesh.FT_MoreThan, 18 )
+aGroup = mesh.MakeGroup("Skew > 18", SMESH.FACE, SMESH.FT_Skew, SMESH.FT_MoreThan, 18 )
# print result
anIds = aGroup.GetIDs()
-print "Criterion: Skew > 18 Nb = ", len( anIds )
+print("Criterion: Skew > 18 Nb = ", len( anIds ))
#for i in range( len( anIds ) ):
#print anIds[ i ]
# Criterion : Length > 10
# create group
-aGroup = mesh.MakeGroup("Length > 10", smesh.FACE, smesh.FT_Length, smesh.FT_MoreThan, 10 )
+aGroup = mesh.MakeGroup("Length > 10", SMESH.FACE, SMESH.FT_Length, SMESH.FT_MoreThan, 10 )
# print result
anIds = aGroup.GetIDs()
-print "Criterion: Length > 10 Nb = ", len( anIds )
+print("Criterion: Length > 10 Nb = ", len( anIds ))
#for i in range( len( anIds ) ):
#print anIds[ i ]
# Criterion : Borders at multi-connections = 2
# create group
-aGroup = mesh.MakeGroup("Borders at multi-connections = 2", smesh.EDGE, smesh.FT_MultiConnection, smesh.FT_EqualTo, 2)
+aGroup = mesh.MakeGroup("Borders at multi-connections = 2", SMESH.EDGE, SMESH.FT_MultiConnection, SMESH.FT_EqualTo, 2)
# print result
anIds = aGroup.GetIDs()
-print "Criterion: Borders at multi-connections = 2 Nb = ", len( anIds )
+print("Criterion: Borders at multi-connections = 2 Nb = ", len( anIds ))
#for i in range( len( anIds ) ):
#print anIds[ i ]
# Criterion : Element Diameter 2D > 10
# create group
-aGroup = mesh.MakeGroup("Element Diameter 2D > 10", smesh.FACE, smesh.FT_MaxElementLength2D, smesh.FT_MoreThan, 10 )
+aGroup = mesh.MakeGroup("Element Diameter 2D > 10", SMESH.FACE, SMESH.FT_MaxElementLength2D, SMESH.FT_MoreThan, 10 )
# print result
anIds = aGroup.GetIDs()
-print "Criterion: Element Diameter 2D > 10 Nb = ", len( anIds )
+print("Criterion: Element Diameter 2D > 10 Nb = ", len( anIds ))
#for i in range( len( anIds ) ):
#print anIds[ i ]
-salome.sg.updateObjBrowser(1)
+salome.sg.updateObjBrowser()