<source>MED_FILES_FILTER</source>
<translation>MED files</translation>
</message>
- <message>
- <source>SAUV_FILES_FILTER</source>
- <translation>SAUV files</translation>
- </message>
<message>
<source>IDEAS_FILES_FILTER</source>
<translation>IDEAS files</translation>
<message>
<source>EDITERR_NO_MEDIUM_ON_GEOM</source>
<translation>Some medium nodes not placed on geometry to avoid
- distorting elements shown in magenta</translation>
+ distorting elements shown in magenta.</translation>
</message>
<message>
<source>SMESH_GEOM</source>
<translation>Construct Group</translation>
</message>
<message>
- <source>MEN_REF_ALL</source>
+ <source>MEN_MG_ADAPT</source>
+ <translation>Remesh with MG_Adapt</translation>
+ </message>
+ <message>
+ <source>MEN_HOMARD_ADAPT</source>
<translation>Uniform refinement</translation>
</message>
<message>
- <source>MEN_REF_HOMARD</source>
- <translation>Adaptation with HOMARD</translation>
+ <source>Args</source>
+ <translation>Arguments</translation>
</message>
<message>
- <source>MEN_HOMARD_CREATE_CASE</source>
- <translation>New case for adaptation with HOMARD</translation>
+ <source>MeshOut</source>
+ <translation>Mesh Out</translation>
</message>
<message>
- <source>MEN_HOMARD_FOLLOW_ITERATION</source>
- <translation>Existing case</translation>
+ <source>MeshIn</source>
+ <translation>Mesh In</translation>
</message>
<message>
- <source>MEN_HOMARD_NEW_ITERATION</source>
- <translation>New iteration</translation>
+ <source>MEDFile</source>
+ <translation>MED file</translation>
</message>
<message>
- <source>MEN_HOMARD_COMPUTE</source>
- <translation>Compute</translation>
+ <source>Browser</source>
+ <translation>Browser</translation>
</message>
<message>
- <source>MEN_HOMARD_COMPUTE_PUBLISH</source>
- <translation>Compute and publish</translation>
+ <source>Publish_MG_ADAPT</source>
+ <translation>Publish</translation>
</message>
<message>
- <source>MEN_MG_ADAPT</source>
- <translation>Remesh with MG_Adapt</translation>
+ <source>SIZE_MAP_FIELD</source>
+ <translation>Size map field</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_FIELD_NAME</source>
+ <translation>Field Name</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_MED_FILE_1</source>
+ <translation>This MED file cannot be read.</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_MED_FILE_2</source>
+ <translation>No mesh in this MED file.</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_MED_FILE_3</source>
+ <translation>More than one mesh in this MED file.</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_MED_FILE_4</source>
+ <translation>The mesh in this MED file cannot be read.</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_MED_FILE_5</source>
+ <translation>No field in this MED file.</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_ERROR</source>
+ <translation>Error</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_CH_ST</source>
+ <translation>Chosen time step</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_RANK</source>
+ <translation>Rank</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_TSTP</source>
+ <translation>Time step </translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_NO_T_ST</source>
+ <translation>No time step</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_L_ST</source>
+ <translation>Last time step</translation>
+ </message>
+ <message>
+ <source>MeshName</source>
+ <translation>Mesh name</translation>
+ </message>
+ <message>
+ <source>LOCAL_MG_ADAPT</source>
+ <translation>Local</translation>
+ </message>
+ <message>
+ <source>BACKGRND_MG_ADAPT</source>
+ <translation>Background</translation>
+ </message>
+ <message>
+ <source>CNST_MG_ADAPT</source>
+ <translation>Constant</translation>
+ </message>
+ <message>
+ <source>MED_FILE_BCKG</source>
+ <translation>MED file background size map</translation>
+ </message>
+ <message>
+ <source>VALUE_MG_ADAPT</source>
+ <translation>Value</translation>
+ </message>
+ <message>
+ <source>SIZE_MAP_DEF</source>
+ <translation>Size map definition</translation>
+ </message>
+ <message>
+ <source>ADVOP</source>
+ <translation>Advanced Options</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_DIAG_1</source>
+ <translation>Adaptation succeeded.</translation>
+ </message>
+ <message>
+ <source>MG_ADAPT_DIAG_2</source>
+ <translation>Adaptation failed.</translation>
</message>
<message>
<source>MEN_CONV_TO_QUAD</source>
<source>MEN_EXPORT_GMF</source>
<translation>Export to GMF file</translation>
</message>
- <message>
- <source>MEN_EXPORT_SAUV</source>
- <translation>Export to SAUV file</translation>
- </message>
<message>
<source>MEN_EXPORT_STL</source>
<translation>Export to STL file</translation>
<source>MEN_GMF</source>
<translation>GMF file</translation>
</message>
- <message>
- <source>MEN_IMPORT_SAUV</source>
- <translation>SAUV file</translation>
- </message>
- <message>
- <source>MEN_SAUV</source>
- <translation>SAUV file</translation>
- </message>
<message>
<source>MEN_MERGE</source>
<translation>Merge Nodes</translation>
</message>
<message>
<source>MEN_SAVE_DISTRIBUTION</source>
- <translation>Export ...</translation>
+ <translation>Export the distribution...</translation>
</message>
<message>
<source>MEN_SHOW_DISTRIBUTION</source>
<source>SMESH_AUTO_DIM</source>
<translation>Automatically define space dimension</translation>
</message>
+ <message>
+ <source>SMESH_MED_SAVE_NUMS</source>
+ <translation>Export indices</translation>
+ </message>
<message>
<source>SMESH_ZTOLERANCE</source>
<translation>Z tolerance</translation>
<source>SMESH_RENUMBERING</source>
<translation>Renumbering</translation>
</message>
+ <message>
+ <source>SMESH_RENUMBER</source>
+ <translation>Renumber</translation>
+ </message>
<message>
<source>SMESH_RENUMBERING_ELEMENTS_TITLE</source>
<translation>Renumbering elements</translation>
<translation>None</translation>
</message>
<message>
- <source>ADAPT_PREF_HOMARD_PUBLICATION</source>
- <translation>Publication of meshes with HOMARD</translation>
- </message>
- <message>
- <source>ADAPT_PREF_HOMARD_PUBLICATION_MAILLAGE_IN</source>
- <translation>IN mesh</translation>
+ <source>ADAPT_WITH_HOMARD</source>
+ <translation>Adaptation with HOMARD</translation>
</message>
<message>
- <source>ADAPT_PREF_HOMARD_PUBLICATION_MAILLAGE_OUT</source>
- <translation>OUT mesh</translation>
+ <source>ADAPT_PREF_MG_ADAPT</source>
+ <translation>Adaptation with MG-Adapt</translation>
</message>
<message>
- <source>ADAPT_PREF_HOMARD_YACS</source>
- <translation>A YACS schema with HOMARD</translation>
+ <source>ADAPT_PREF_MG_ADAPT_FILE_MAILLAGE_OUT</source>
+ <translation>Write the OUT mesh</translation>
</message>
<message>
- <source>ADAPT_PREF_HOMARD_YACS_MAX_ITER</source>
- <translation>Maximal number of iterations</translation>
+ <source>ADAPT_PREF_MG_ADAPT_PUBLICATION_MAILLAGE_OUT</source>
+ <translation>Publication of the OUT mesh</translation>
</message>
<message>
- <source>ADAPT_PREF_HOMARD_YACS_MAX_NODE</source>
- <translation>Maximal number of nodes</translation>
+ <source>OPTION_VALUE_COLUMN</source>
+ <translation>Option</translation>
</message>
<message>
- <source>ADAPT_PREF_HOMARD_YACS_MAX_ELEM</source>
- <translation>Maximal number of elements</translation>
+ <source>OPTION_NAME_COLUMN</source>
+ <translation>Value</translation>
</message>
<message>
- <source>ADAPT_PREF_HOMARD_YACS_TYPE_CONVERGENCE</source>
- <translation>Test type for a YACS schema with HOMARD</translation>
+ <source>compute_ridges</source>
+ <translation>Compute ridges</translation>
</message>
<message>
- <source>ADAPT_PREF_MG_ADAPT</source>
- <translation>Adaptation with MG-Adapt</translation>
+ <source>max_memory</source>
+ <translation>Maximum memory (Mb)</translation>
</message>
<message>
- <source>ADAPT_PREF_MG_ADAPT_FILE_MAILLAGE_OUT</source>
- <translation>Write the OUT mesh</translation>
+ <source>Adaption</source>
+ <translation>adaptation</translation>
</message>
<message>
- <source>ADAPT_PREF_MG_ADAPT_PUBLICATION_MAILLAGE_OUT</source>
- <translation>Publication of the OUT mesh</translation>
+ <source>components</source>
+ <translation>Components</translation>
</message>
<message>
<source>ADAPT_PREF_MG_ADAPT_SIZE_MAP</source>
<source>ADAPT_PREF_MG_ADAPT_SIZE_MAP_BACKGROUND</source>
<translation>Background</translation>
</message>
- <message>
- <source>ADAPT_PREF_MG_ADAPT_TIME_STEP</source>
- <translation>Time step</translation>
- </message>
<message>
<source>ADAPT_PREF_MG_ADAPT_TIME_STEP_LAST</source>
<translation>Last</translation>
</message>
+ <message>
+ <source>ADAPT_PREF_MG_ADAPT_TIME_STEP</source>
+ <translation>Choosen time step</translation>
+ </message>
<message>
<source>ADAPT_PREF_MG_ADAPT_TIME_STEP_C</source>
<translation>Value</translation>
</message>
+ <message>
+ <source>MG_ADAPT_SELECT_FILE_0</source>
+ <translation>MG-ADAPT select file</translation>
+ </message>
+ <message>
+ <source>ADAPT_PREF_MG_ADAPT_ADVOP</source>
+ <translation>Advanced Options</translation>
+ </message>
<message>
<source>SMESH_VISU_PROBLEM</source>
<translation>Mesh visualization failed</translation>
<source>SMESH_Z</source>
<translation>Z</translation>
</message>
+ <message>
+ <source>SMESH_Z_SCALARBAR</source>
+ <translation>Z:</translation>
+ </message>
<message>
<source>STATE_ALGO_MISSING</source>
<translation>%3 %2D algorithm is missing</translation>
<source>STB_CONSTRUCT_GROUP</source>
<translation>Construct Group</translation>
</message>
- <message>
- <source>STB_REF_ALL</source>
- <translation>Uniform refinement</translation>
- </message>
- <message>
- <source>STB_REF_HOMARD</source>
- <translation>Refinement with HOMARD</translation>
- </message>
- <message>
- <source>STB_HOMARD_CREATE_CASE</source>
- <translation>Creation of a new case for adaptation with HOMARD</translation>
- </message>
- <message>
- <source>STB_HOMARD_FOLLOW_ITERATION</source>
- <translation>Creation of a new case: pursuit of a stored iteration</translation>
- </message>
- <message>
- <source>STB_HOMARD_NEW_ITERATION</source>
- <translation>Creation of a next iteration</translation>
- </message>
- <message>
- <source>STB_HOMARD_COMPUTE</source>
- <translation>Compute the refinement</translation>
- </message>
- <message>
- <source>STB_HOMARD_COMPUTE_PUBLISH</source>
- <translation>Compute the refinement and publish the final mesh</translation>
- </message>
- <message>
- <source>STB_EDIT</source>
- <translation>Edit</translation>
- </message>
<message>
<source>STB_MG_ADAPT</source>
<translation>Remesh with MG_Adapt</translation>
</message>
+ <message>
+ <source>STB_HOMARD_ADAPT</source>
+ <translation>Uniform refinement</translation>
+ </message>
<message>
<source>STB_CONV_TO_QUAD</source>
<translation>Convert to/from quadratic</translation>
<source>STB_EXPORT_GMF</source>
<translation>Export to GMF file</translation>
</message>
- <message>
- <source>STB_EXPORT_SAUV</source>
- <translation>Export to SAUV file</translation>
- </message>
<message>
<source>STB_EXPORT_STL</source>
<translation>Export to STL file</translation>
<source>STB_GMF</source>
<translation>Export GMF file</translation>
</message>
- <message>
- <source>STB_IMPORT_SAUV</source>
- <translation>Import SAUV file</translation>
- </message>
- <message>
- <source>STB_SAUV</source>
- <translation>Export SAUV file</translation>
- </message>
<message>
<source>STB_MERGE</source>
<translation>Merge nodes</translation>
<source>TOP_CONSTRUCT_GROUP</source>
<translation>Construct Group</translation>
</message>
- <message>
- <source>TOP_REF_ALL</source>
- <translation>Uniform refinement</translation>
- </message>
- <message>
- <source>TOP_HOMARD_CREATE_CASE</source>
- <translation>New case</translation>
- </message>
- <message>
- <source>TOP_HOMARD_FOLLOW_ITERATION</source>
- <translation>Existing case</translation>
- </message>
- <message>
- <source>TOP_HOMARD_NEW_ITERATION</source>
- <translation>New iteration</translation>
- </message>
- <message>
- <source>TOP_HOMARD_COMPUTE</source>
- <translation>Compute</translation>
- </message>
- <message>
- <source>TOP_HOMARD_COMPUTE_PUBLISH</source>
- <translation>Compute and publish</translation>
- </message>
<message>
<source>TOP_MG_ADAPT</source>
<translation>Remesh with MG_Adapt</translation>
</message>
+ <message>
+ <source>TOP_HOMARD_ADAPT</source>
+ <translation>Uniform refinement</translation>
+ </message>
<message>
<source>TOP_CONV_TO_QUAD</source>
<translation>Convert to/from quadratic</translation>
<source>TOP_EXPORT_MED</source>
<translation>Export to MED file</translation>
</message>
- <message>
- <source>TOP_EXPORT_SAUV</source>
- <translation>Export to SAUV file</translation>
- </message>
<message>
<source>TOP_EXPORT_STL</source>
<translation>Export to STL file</translation>
<source>TOP_GMF</source>
<translation>Export GMF file</translation>
</message>
- <message>
- <source>TOP_IMPORT_SAUV</source>
- <translation>Import SAUV file</translation>
- </message>
- <message>
- <source>TOP_SAUV</source>
- <translation>Export SAUV file</translation>
- </message>
<message>
<source>TOP_MERGE</source>
<translation>Merge nodes</translation>
</message>
<message>
<source>NB_GROUPS_CREATED</source>
- <translation>%1 groups of faces created</translation>
+ <translation>%1 group(s) of faces created</translation>
</message>
</context>
<context>
<source>PREF_SHOW_WARN</source>
<translation>Show warning when exporting group</translation>
</message>
+ <message>
+ <source>PREF_MED_SAVE_NUMS</source>
+ <translation>Save cell/node numbers to MED file</translation>
+ </message>
<message>
<source>PREF_ZTOLERANCE</source>
<translation>Z tolerance for MED export</translation>
<source>PREF_PREVIEW_CHUNK_SIZE</source>
<translation>Sub-shapes preview chunk size</translation>
</message>
+ <message>
+ <source>INFO_WELCOME_TO_SMESH</source>
+ <translation>Welcome to Mesh</translation>
+ </message>
+ <message>
+ <source>INFO_GRP_CREATE_MESH</source>
+ <translation>Create mesh</translation>
+ </message>
+ <message>
+ <source>INFO_DEFINE_ALGOS</source>
+ <translation>Choose algorithms</translation>
+ </message>
+ <message>
+ <source>INFO_DEFINE_HYPOS</source>
+ <translation>Define hypotheses</translation>
+ </message>
+ <message>
+ <source>INFO_COMPUTE</source>
+ <translation>Compute</translation>
+ </message>
+ <message>
+ <source>INFO_REFINE</source>
+ <translation>Add refinements</translation>
+ </message>
+ <message>
+ <source>INFO_REFINE_LOCAL_SIZE</source>
+ <translation>via local sizes with some hypotheses</translation>
+ </message>
+ <message>
+ <source>INFO_REFINE_SUBMESH</source>
+ <translation>via sub-meshes</translation>
+ </message>
+ <message>
+ <source>INFO_GRP_IMPORT_MESH</source>
+ <translation>Import mesh</translation>
+ </message>
+ <message>
+ <source>INFO_AVAILABLE_FORMATS</source>
+ <translation>Available formats</translation>
+ </message>
+ <message>
+ <source>INFO_GRP_CHECK_MESH</source>
+ <translation> Check mesh quality</translation>
+ </message>
+ <message>
+ <source>INFO_DISPLAY</source>
+ <translation>Display mesh</translation>
+ </message>
+ <message>
+ <source>INFO_QUALITY_INFO</source>
+ <translation>Display some quality criteria</translation>
+ </message>
+ <message>
+ <source>INFO_QUALITY_AREA</source>
+ <translation>area</translation>
+ </message>
+ <message>
+ <source>INFO_QUALITY_VOLUME</source>
+ <translation>volume</translation>
+ </message>
+ <message>
+ <source>INFO_QUALITY_ASPECT_RATION</source>
+ <translation>aspect ration</translation>
+ </message>
+ <message>
+ <source>INFO_CLIPPING</source>
+ <translation>Add clipping planes</translation>
+ </message>
</context>
<context>
<name>SMESHGUI_GroupDlg</name>
<source>OBJECT</source>
<translation>Object</translation>
</message>
+ <message>
+ <source>OBJECTS</source>
+ <translation>Objects</translation>
+ </message>
<message>
<source>POINT</source>
<translation>Point</translation>
<source>VOLUMES</source>
<translation>Volumes</translation>
</message>
+ <message>
+ <source>REF_GROUPS</source>
+ <translation>Ref. objects (optional)</translation>
+ </message>
<message>
<source>OUTSIDE_VOLUME_NORMAL</source>
<translation>Face normal outside volume</translation>