-// Copyright (C) 2007-2020 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2021 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
// SMESH includes
#include "SMESHGUI.h"
-#include "SMESHGUI_AdaptDlg.h"
#include "SMESHGUI_Add0DElemsOnAllNodesDlg.h"
#include "SMESHGUI_AddMeshElementDlg.h"
#include "SMESHGUI_AddQuadraticElementDlg.h"
#include "SMESHGUI_GroupUtils.h"
#include "SMESHGUI_Hypotheses.h"
#include "SMESHGUI_HypothesesUtils.h"
+#include "SMESHGUI_MG_ADAPTDRIVER.h"
#include "SMESHGUI_Make2DFrom3DOp.h"
#include "SMESHGUI_MakeNodeAtPointDlg.h"
#include "SMESHGUI_Measurements.h"
#include "SMESH_ControlsDef.hxx"
#include "SMESH_ScalarBarActor.h"
#include "SMESH_TypeFilter.hxx"
+#include "SMESH_Component_Generator.hxx"
// SALOME GUI includes
#include <LightApp_DataOwner.h>
#include <vtkRenderer.h>
// SALOME KERNEL includes
+#include <Basics_Utils.hxx>
#include <SALOMEDSClient_ClientFactory.hxx>
#include <SALOMEDSClient_IParameters.hxx>
#include <SALOMEDSClient_SComponent.hxx>
#include <SALOMEDSClient_StudyBuilder.hxx>
-#include <SALOMEDS_Study.hxx>
#include <SALOMEDS_SObject.hxx>
-#include "utilities.h"
+#include <SALOMEDS_Study.hxx>
+#include <SALOME_GenericObj_wrap.hxx>
#include <SALOME_LifeCycleCORBA.hxx>
+#include <utilities.h>
// OCCT includes
#include <Standard_ErrorHandler.hxx>
#include <NCollection_DataMap.hxx>
#include <NCollection_DoubleMap.hxx>
-#include <Basics_Utils.hxx>
-
// Below macro, when uncommented, switches on simplified (more performant) algorithm
// of auto-color picking up
#define SIMPLE_AUTOCOLOR
theCommandID == SMESHOp::OpPopupImportCGNS ) {
filter.append( QObject::tr( "CGNS_FILES_FILTER" ) + " (*.cgns)" );
}
- else if ( theCommandID == SMESHOp::OpImportSAUV ||
- theCommandID == SMESHOp::OpPopupImportSAUV ) {
- filter.append( QObject::tr( "SAUV_FILES_FILTER" ) + " (*.sauv *.sauve)" );
- filter.append( QObject::tr( "ALL_FILES_FILTER" ) + " (*)" );
- }
else if ( theCommandID == SMESHOp::OpImportGMF ||
theCommandID == SMESHOp::OpPopupImportGMF ) {
filter.append( QObject::tr( "GMF_ASCII_FILES_FILTER" ) + " (*.mesh)" );
}
break;
}
- case SMESHOp::OpImportSAUV:
- case SMESHOp::OpPopupImportSAUV:
- {
- // SAUV format
- SMESH::DriverMED_ReadStatus res;
- aMeshes = theComponentMesh->CreateMeshesFromSAUV( filename.toUtf8().constData(), res );
- if ( res != SMESH::DRS_OK ) {
- errors.append( QString( "%1 :\n\t%2" ).arg( filename ).
- arg( QObject::tr( QString( "SMESH_DRS_%1" ).arg( res ).toLatin1().data() ) ) );
- }
- break;
- }
case SMESHOp::OpImportGMF:
case SMESHOp::OpPopupImportGMF:
{
theCommandID == SMESHOp::OpPopupExportSTL );
const bool isCGNS= ( theCommandID == SMESHOp::OpExportCGNS ||
theCommandID == SMESHOp::OpPopupExportCGNS );
- const bool isSAUV= ( theCommandID == SMESHOp::OpExportSAUV ||
- theCommandID == SMESHOp::OpPopupExportSAUV );
const bool isGMF = ( theCommandID == SMESHOp::OpExportGMF ||
theCommandID == SMESHOp::OpPopupExportGMF );
bool aCheckWarn = true;
if ( resMgr )
aCheckWarn = resMgr->booleanValue( "SMESH", "show_warning", false );
+
// get mesh object from selection and check duplication of their names
bool hasDuplicatedMeshNames = false;
QList< QPair< SMESH::SMESH_IDSource_var, QString > > aMeshList;
SMESH::SMESH_Mesh_var aMesh = aMeshOrGroup->GetMesh();
QString aMeshName = (*aMeshIter).second;
- if ( isMED || isCGNS || isSAUV ) // formats where group names must be unique
+ if ( isMED || isCGNS ) // formats where group names must be unique
{
// check for equal group names within each mesh
for( aMeshIter = aMeshList.begin(); aMeshIter != aMeshList.end(); aMeshIter++ ) {
format = "CGNS";
notSupportedElemTypes.push_back( SMESH::Entity_Ball );
}
- else if ( isSAUV )
- {
- format = "SAUV";
- notSupportedElemTypes.push_back( SMESH::Entity_Ball );
- notSupportedElemTypes.push_back( SMESH::Entity_BiQuad_Triangle );
- notSupportedElemTypes.push_back( SMESH::Entity_BiQuad_Quadrangle );
- notSupportedElemTypes.push_back( SMESH::Entity_TriQuad_Hexa );
- notSupportedElemTypes.push_back( SMESH::Entity_Hexagonal_Prism );
- notSupportedElemTypes.push_back( SMESH::Entity_Polygon );
- notSupportedElemTypes.push_back( SMESH::Entity_Quad_Polygon );
- notSupportedElemTypes.push_back( SMESH::Entity_Polyhedra );
- }
else if ( isGMF )
{
format = "GMF";
}
if ( ! notSupportedElemTypes.empty() )
{
- SMESH::long_array_var nbElems = aMeshOrGroup->GetMeshInfo();
+ SMESH::smIdType_array_var nbElems = aMeshOrGroup->GetMeshInfo();
for ( size_t iType = 0; iType < notSupportedElemTypes.size(); ++iType )
if ( nbElems[ notSupportedElemTypes[ iType ]] > 0 )
presentNotSupported.push_back( notSupportedElemTypes[ iType ]);
"SMESH_OCTAHEDRA","SMESH_POLYEDRONS","SMESH_QUADRATIC_POLYEDRONS","SMESH_BALLS"
};
// is typeMsg complete? (compilation failure mains that enum SMDSAbs_EntityType changed)
- const int nbTypes = sizeof( typeMsg ) / sizeof( const char* );
- int _assert[( nbTypes == SMESH::Entity_Last ) ? 2 : -1 ]; _assert[0]=_assert[1]=0;
+ static_assert( sizeof(typeMsg) / sizeof(const char*) == SMESH::Entity_Last,
+ "Update names of EntityType's!!!" );
QString andStr = " " + QObject::tr("SMESH_AND") + " ", comma(", ");
for ( size_t iType = 0; iType < presentNotSupported.size(); ++iType ) {
// Init the parameters with the default values
bool aIsASCII_STL = true;
- bool toCreateGroups = false;
- if ( resMgr )
- toCreateGroups = resMgr->booleanValue( "SMESH", "auto_groups", false );
- bool toOverwrite = true;
- bool toFindOutDim = true;
- double zTol = resMgr ? resMgr->doubleValue( "SMESH", "med_ztolerance", 0. ) : 0.;
+ bool toCreateGroups = resMgr->booleanValue( "SMESH", "auto_groups", false );
+ bool toOverwrite = true;
+ bool toFindOutDim = true;
+ bool saveNumbers = resMgr->booleanValue( "SMESH", "med_save_numbers", true );
+ bool toRenumber = true;
+ double zTol = resMgr->doubleValue( "SMESH", "med_ztolerance", 0. );
QString aFilter, aTitle = QObject::tr("SMESH_EXPORT_MESH");
QString anInitialPath = "";
QList< QPair< GEOM::ListOfFields_var, QString > > aFieldList;
// Get a file name to write in and additional options
- if ( isUNV || isDAT || isGMF ) // Export w/o options
+ if ( isGMF ) // Export w/o options
{
- if ( isUNV )
- aFilter = QObject::tr( "IDEAS_FILES_FILTER" ) + " (*.unv)";
- else if ( isDAT )
- aFilter = QObject::tr( "DAT_FILES_FILTER" ) + " (*.dat)";
- else if ( isGMF )
- aFilter = QObject::tr( "GMF_ASCII_FILES_FILTER" ) + " (*.mesh)" +
- ";;" + QObject::tr( "GMF_BINARY_FILES_FILTER" ) + " (*.meshb)";
- if ( anInitialPath.isEmpty() ) anInitialPath = SUIT_FileDlg::getLastVisitedPath();
+ aFilter = QObject::tr( "GMF_ASCII_FILES_FILTER" ) + " (*.mesh)" +
+ ";;" + QObject::tr( "GMF_BINARY_FILES_FILTER" ) + " (*.meshb)";
+ if ( anInitialPath.isEmpty() ) anInitialPath = SUIT_FileDlg::getLastVisitedPath();
+
aFilename = SUIT_FileDlg::getFileName(SMESHGUI::desktop(),
anInitialPath + QString("/") + aMeshName,
aFilter, aTitle, false);
}
- else if ( isCGNS )// Export to CGNS
+ else if ( isCGNS || isUNV || isDAT ) // Export to [ CGNS | UNV | DAT ] - one option
{
- const char* theByTypeResource = "cgns_group_elems_by_type";
- toCreateGroups = SMESHGUI::resourceMgr()->booleanValue( "SMESH", theByTypeResource, false );
+ const char* theOptionResource = isCGNS ? "cgns_group_elems_by_type" : "export_renumber";
+ bool option = resMgr->booleanValue( "SMESH", theOptionResource, false );
QStringList checkBoxes;
- checkBoxes << QObject::tr("CGNS_EXPORT_ELEMS_BY_TYPE");
+ checkBoxes << QObject::tr( isCGNS ? "CGNS_EXPORT_ELEMS_BY_TYPE" : "SMESH_RENUMBER" );
SalomeApp_CheckFileDlg* fd =
new SalomeApp_CheckFileDlg ( SMESHGUI::desktop(), false, checkBoxes, true, true );
fd->setWindowTitle( aTitle );
- fd->setNameFilter( QObject::tr( "CGNS_FILES_FILTER" ) + " (*.cgns)" );
+ if ( isCGNS )
+ fd->setNameFilter( QObject::tr( "CGNS_FILES_FILTER" ) + " (*.cgns)" );
+ else if ( isUNV )
+ fd->setNameFilter( QObject::tr( "IDEAS_FILES_FILTER" ) + " (*.unv)" );
+ else if ( isDAT )
+ fd->setNameFilter( QObject::tr( "DAT_FILES_FILTER" ) + " (*.dat)" );
if ( !anInitialPath.isEmpty() )
fd->setDirectory( anInitialPath );
- fd->selectFile(aMeshName);
+ fd->selectFile( aMeshName );
SMESHGUI_FileValidator* fv = new SMESHGUI_FileValidator( fd );
fd->setValidator( fv );
- fd->SetChecked( toCreateGroups, 0 );
+ fd->SetChecked( option, 0 );
if ( fd->exec() )
aFilename = fd->selectedFile();
- toOverwrite = fv->isOverwrite(aFilename);
- toCreateGroups = fd->IsChecked(0);
- SMESHGUI::resourceMgr()->setValue("SMESH", theByTypeResource, toCreateGroups );
+ toOverwrite = fv->isOverwrite( aFilename );
+ option = fd->IsChecked( 0 );
+ SMESHGUI::resourceMgr()->setValue("SMESH", theOptionResource, option );
+ ( isCGNS ? toCreateGroups : toRenumber ) = option;
delete fd;
}
}
delete fd;
}
- else if ( isMED || isSAUV ) // Export to MED or SAUV
+ else if ( isMED ) // Export to MED
{
int defaultVersion = 0;
QMap<QString, int> aFilterMap;
- if ( isMED ) {
- //filters << QObject::tr( "MED_FILES_FILTER" ) + " (*.med)";
- //QString vmed (aMesh->GetVersionString(-1, 2));
- SMESH::long_array_var mvok = aMesh->GetMEDVersionsCompatibleForAppend();
- if ( mvok->length() > 0)
- defaultVersion = mvok[0]; // the current version to set the default filter on it
- for ( CORBA::ULong i = 0; i < mvok->length(); ++i )
- {
- QString vs = (char*)( SMESH_Comment( mvok[i]/10 ) << "." << mvok[i]%10 );
- MESSAGE("MED version: " << vs.toStdString());
- aFilterMap.insert( QObject::tr( "MED_VX_FILES_FILTER" ).arg( vs ) + " (*.med)", mvok[i]);
- }
- }
- else { // isSAUV
- aFilterMap.insert("All files (*)", -1 );
- aFilterMap.insert("SAUV files (*.sauv)", defaultVersion ); // 0 = default filter (defaultVersion)
- aFilterMap.insert("SAUV files (*.sauve)", -1 );
+ //filters << QObject::tr( "MED_FILES_FILTER" ) + " (*.med)";
+ //QString vmed (aMesh->GetVersionString(-1, 2));
+ SMESH::long_array_var mvok = aMesh->GetMEDVersionsCompatibleForAppend();
+ if ( mvok->length() > 0)
+ defaultVersion = mvok[0]; // the current version to set the default filter on it
+ for ( CORBA::ULong i = 0; i < mvok->length(); ++i )
+ {
+ QString vs = (char*)( SMESH_Comment( mvok[i]/10 ) << "." << mvok[i]%10 );
+ aFilterMap.insert( QObject::tr( "MED_VX_FILES_FILTER" ).arg( vs ) + " (*.med)", mvok[i]);
}
QStringList filters;
QMap<QString, int>::const_iterator it = aFilterMap.begin();
aDefaultFilter = it.key();
}
QStringList checkBoxes;
- checkBoxes << QObject::tr("SMESH_AUTO_GROUPS") << QObject::tr("SMESH_AUTO_DIM");
+ checkBoxes << QObject::tr("SMESH_AUTO_GROUPS")
+ << QObject::tr("SMESH_AUTO_DIM")
+ << QObject::tr("SMESH_MED_SAVE_NUMS");
SMESHGUI_FieldSelectorWdg* fieldSelWdg = new SMESHGUI_FieldSelectorWdg();
QList< QWidget* > wdgList;
fd->selectNameFilter( aDefaultFilter );
fd->SetChecked( toCreateGroups, 0 );
fd->SetChecked( toFindOutDim, 1 );
+ fd->SetChecked( saveNumbers, 2 );
if ( !anInitialPath.isEmpty() )
fd->setDirectory( anInitialPath );
fd->selectFile(aMeshName);
}
toCreateGroups = fd->IsChecked(0);
toFindOutDim = fd->IsChecked(1);
+ saveNumbers = fd->IsChecked(2);
zTol = zTolCheck->isChecked() ? zTolSpin->value() : -1;
fieldSelWdg->GetSelectedFields();
if ( resMgr ) resMgr->setValue( "SMESH", "enable_ztolerance", zTolCheck->isChecked() );
// if ( SMESHGUI::automaticUpdate() )
// SMESH::UpdateView();
// }
- if ( isMED && isOkToWrite)
+ if ( isMED && isOkToWrite )
{
- MESSAGE("OK to write MED file "<< aFilename.toUtf8().constData());
aMeshIter = aMeshList.begin();
for( int aMeshIndex = 0; aMeshIter != aMeshList.end(); aMeshIter++, aMeshIndex++ )
{
SMESH::SMESH_Mesh_var aMeshItem = aMeshOrGroup->GetMesh();
const GEOM::ListOfFields& fields = aFieldList[ aMeshIndex ].first.in();
const QString& geoAssFields = aFieldList[ aMeshIndex ].second;
- const bool hasFields = ( fields.length() || !geoAssFields.isEmpty() );
- if ( !hasFields && aMeshOrGroup->_is_equivalent( aMeshItem ) && zTol < 0 )
- aMeshItem->ExportMED( aFilename.toUtf8().data(), toCreateGroups, aFormat,
- toOverwrite && aMeshIndex == 0, toFindOutDim );
- else
- aMeshItem->ExportPartToMED( aMeshOrGroup, aFilename.toUtf8().data(),
- toCreateGroups, aFormat,
- toOverwrite && aMeshIndex == 0, toFindOutDim,
- fields, geoAssFields.toLatin1().data(), zTol );
- }
- }
- else if ( isSAUV )
- {
- for( aMeshIter = aMeshList.begin(); aMeshIter != aMeshList.end(); aMeshIter++ )
- {
- SMESH::SMESH_Mesh_var aMeshItem = SMESH::SMESH_Mesh::_narrow( (*aMeshIter).first );
- if( !aMeshItem->_is_nil() )
- aMeshItem->ExportSAUV( aFilename.toUtf8().data(), toCreateGroups );
+
+ aMeshItem->ExportPartToMED( aMeshOrGroup, aFilename.toUtf8().data(),
+ toCreateGroups, aFormat,
+ toOverwrite && aMeshIndex == 0, toFindOutDim,
+ fields, geoAssFields.toLatin1().data(), zTol, saveNumbers );
}
}
else if ( isDAT )
{
if ( aMeshOrGroup->_is_equivalent( aMesh ))
- aMesh->ExportDAT( aFilename.toUtf8().data() );
+ aMesh->ExportDAT( aFilename.toUtf8().data(), toRenumber );
else
- aMesh->ExportPartToDAT( aMeshOrGroup, aFilename.toUtf8().data() );
+ aMesh->ExportPartToDAT( aMeshOrGroup, aFilename.toUtf8().data(), toRenumber );
}
else if ( isUNV )
{
if ( aMeshOrGroup->_is_equivalent( aMesh ))
- aMesh->ExportUNV( aFilename.toUtf8().data() );
+ aMesh->ExportUNV( aFilename.toUtf8().data(), toRenumber );
else
- aMesh->ExportPartToUNV( aMeshOrGroup, aFilename.toUtf8().data() );
+ aMesh->ExportPartToUNV( aMeshOrGroup, aFilename.toUtf8().data(), toRenumber );
}
else if ( isSTL )
{
aMesh->ExportGMF( aMeshOrGroup, aFilename.toUtf8().data(), toCreateGroups );
}
}
- catch (const SALOME::SALOME_Exception& S_ex){
+ catch (const SALOME::SALOME_Exception& S_ex)
+ {
wc.suspend();
- SUIT_MessageBox::warning(SMESHGUI::desktop(),
- QObject::tr("SMESH_WRN_WARNING"),
- QObject::tr("SMESH_EXPORT_FAILED") + SalomeApp_Tools::ExceptionToString(S_ex));
+ if ( S_ex.details.type == SALOME::COMM && // communicate about too large mesh
+ strncmp( "format=", S_ex.details.sourceFile.in(), 7 ) == 0 )
+
+ SUIT_MessageBox::critical(SMESHGUI::desktop(),
+ QObject::tr("SMESH_WRN_WARNING"),
+ QObject::tr(S_ex.details.text.in() ));
+ else
+ SUIT_MessageBox::warning(SMESHGUI::desktop(),
+ QObject::tr("SMESH_WRN_WARNING"),
+ QObject::tr("SMESH_EXPORT_FAILED") + SalomeApp_Tools::ExceptionToString(S_ex));
wc.resume();
}
}
SMESH::Controls::NumericalFunctor* aNumFun =
dynamic_cast<SMESH::Controls::NumericalFunctor*>( aFunctor.get() );
if ( aNumFun ) {
- std::vector<int> elements;
+ std::vector<smIdType> elements;
SMESH::SMESH_Mesh_var mesh = SMESH::IObjectToInterface<SMESH::SMESH_Mesh>(anIO);
if ( mesh->_is_nil() ) {
SMESH::SMESH_IDSource_var idSource =
SMESH::IObjectToInterface<SMESH::SMESH_IDSource>(anIO);
if ( !idSource->_is_nil() )
{
- SMESH::long_array_var ids = idSource->GetIDs();
+ SMESH::smIdType_array_var ids = idSource->GetIDs();
elements.resize( ids->length() );
for ( unsigned i = 0; i < elements.size(); ++i )
elements[i] = ids[i];
if ( anActor->GetControlMode() != aControl )
anActor->SetControlMode( aControl );
QString functorName = functorToString( anActor->GetFunctor() );
- int anEntitiesCount = anActor->GetNumberControlEntities();
+ smIdType anEntitiesCount = anActor->GetNumberControlEntities();
if (anEntitiesCount >= 0)
functorName = functorName + ": " + QString::number(anEntitiesCount);
anActor->GetScalarBarActor()->SetTitle( functorName.toUtf8().constData() );
*
*/
//=============================================================================
-SMESHGUI::SMESHGUI() :
-SalomeApp_Module( "SMESH" )
+SMESHGUI::SMESHGUI() : SalomeApp_Module( "SMESH" )
{
if ( CORBA::is_nil( myComponentSMESH ) )
{
CORBA::Boolean anIsEmbeddedMode;
- myComponentSMESH = SMESH_Client::GetSMESHGen(getApp()->orb(),anIsEmbeddedMode);
+ SALOME_NamingService_Abstract *ns = SalomeApp_Application::namingService();
+ if( dynamic_cast<SALOME_NamingService *>(ns) )
+ myComponentSMESH = SMESH_Client::GetSMESHGen(getApp()->orb(),anIsEmbeddedMode);
+ else
+ {
+ Engines::EngineComponent_var comp = RetrieveSMESHInstance();
+ myComponentSMESH = SMESH::SMESH_Gen::_narrow(comp);
+ }
+
//MESSAGE("-------------------------------> anIsEmbeddedMode=" << anIsEmbeddedMode);
// 0019923: EDF 765 SMESH : default values of hypothesis
long updateLimit = resMgr->integerValue( "SMESH", "update_limit", 500000 );
bool incrementalLimit = resMgr->booleanValue( "SMESH", "incremental_limit", false );
- SMESH::long_array_var info = theMesh->GetMeshInfo();
+ SMESH::smIdType_array_var info = theMesh->GetMeshInfo();
long nbOdElems = info[SMDSEntity_0D];
long nbEdges = info[SMDSEntity_Edge] + info[SMDSEntity_Quad_Edge];
long nbFaces = info[SMDSEntity_Triangle] + info[SMDSEntity_Quad_Triangle] + info[SMDSEntity_BiQuad_Triangle] +
case SMESHOp::OpImportMED:
case SMESHOp::OpImportSTL:
case SMESHOp::OpImportCGNS:
- case SMESHOp::OpImportSAUV:
case SMESHOp::OpImportGMF:
case SMESHOp::OpPopupImportDAT:
case SMESHOp::OpPopupImportUNV:
case SMESHOp::OpPopupImportMED:
case SMESHOp::OpPopupImportSTL:
case SMESHOp::OpPopupImportCGNS:
- case SMESHOp::OpPopupImportSAUV:
case SMESHOp::OpPopupImportGMF:
{
if(isStudyLocked()) break;
case SMESHOp::OpExportUNV:
case SMESHOp::OpExportSTL:
case SMESHOp::OpExportCGNS:
- case SMESHOp::OpExportSAUV:
case SMESHOp::OpExportGMF:
case SMESHOp::OpPopupExportDAT:
case SMESHOp::OpPopupExportMED:
case SMESHOp::OpPopupExportUNV:
case SMESHOp::OpPopupExportSTL:
case SMESHOp::OpPopupExportCGNS:
- case SMESHOp::OpPopupExportSAUV:
case SMESHOp::OpPopupExportGMF:
{
::ExportMeshToFile(theCommandID);
break;
}
// Adaptation - begin
+#ifndef DISABLE_MG_ADAPT
case SMESHOp::OpMGAdapt:
{
- SMESH::SMESH_Mesh_var aMesh = SMESH::SMESH_Mesh::_nil();
- SMESHGUI_AdaptDlg *objet = new SMESHGUI_AdaptDlg( this, theCommandID, aMesh);
+ if ( isStudyLocked() )
+ break;
+ EmitSignalDeactivateDialog();
+
+ SALOME::GenericObj_wrap< SMESH::MG_ADAPT > model = GetSMESHGen()->CreateMG_ADAPT();
+ bool isCreation = false;
+ ( new SMESHGUI_MG_ADAPTDRIVER( this, model, isCreation ))->show();
+ break;
}
+#endif
// Adaptation - end
case SMESHOp::OpSplitBiQuadratic:
case SMESHOp::OpConvertMeshToQuadratic:
try {
SMESH::SMESH_Mesh_var aMesh = aSubMesh->GetFather();
// get submesh elements list by types
- SMESH::long_array_var aNodes = aSubMesh->GetElementsByType(SMESH::NODE);
- SMESH::long_array_var aEdges = aSubMesh->GetElementsByType(SMESH::EDGE);
- SMESH::long_array_var aFaces = aSubMesh->GetElementsByType(SMESH::FACE);
- SMESH::long_array_var aVolumes = aSubMesh->GetElementsByType(SMESH::VOLUME);
+ SMESH::smIdType_array_var aNodes = aSubMesh->GetElementsByType(SMESH::NODE);
+ SMESH::smIdType_array_var aEdges = aSubMesh->GetElementsByType(SMESH::EDGE);
+ SMESH::smIdType_array_var aFaces = aSubMesh->GetElementsByType(SMESH::FACE);
+ SMESH::smIdType_array_var aVolumes = aSubMesh->GetElementsByType(SMESH::VOLUME);
// create group for each type o elements
QString aName = IObject->getName();
QStringList anEntryList;
try {
SUIT_OverrideCursor wc;
SMESH::SMESH_MeshEditor_var aMeshEditor = aMesh->GetMeshEditor();
- int removed = aMeshEditor->RemoveOrphanNodes();
+ smIdType removed = aMeshEditor->RemoveOrphanNodes();
SUIT_MessageBox::information(SMESHGUI::desktop(),
tr("SMESH_INFORMATION"),
tr("NB_NODES_REMOVED").arg(removed));
#ifdef WITH_CGNS
createSMESHAction( SMESHOp::OpImportCGNS, "IMPORT_CGNS" );
#endif
- createSMESHAction( SMESHOp::OpImportSAUV, "IMPORT_SAUV" );
createSMESHAction( SMESHOp::OpImportGMF, "IMPORT_GMF" );
createSMESHAction( SMESHOp::OpPopupImportUNV, "IMPORT_UNV");
createSMESHAction( SMESHOp::OpPopupImportMED, "IMPORT_MED");
#ifdef WITH_CGNS
createSMESHAction( SMESHOp::OpPopupImportCGNS, "IMPORT_CGNS" );
#endif
- createSMESHAction( SMESHOp::OpPopupImportSAUV, "IMPORT_SAUV" );
createSMESHAction( SMESHOp::OpPopupImportGMF, "IMPORT_GMF" );
createSMESHAction( SMESHOp::OpExportDAT, "DAT" );
#ifdef WITH_CGNS
createSMESHAction( SMESHOp::OpExportCGNS, "CGNS");
#endif
- createSMESHAction( SMESHOp::OpExportSAUV, "SAUV");
createSMESHAction( SMESHOp::OpExportGMF, "GMF" );
createSMESHAction( SMESHOp::OpPopupExportDAT, "DAT" );
createSMESHAction( SMESHOp::OpPopupExportMED, "MED" );
#ifdef WITH_CGNS
createSMESHAction( SMESHOp::OpPopupExportCGNS, "CGNS");
#endif
- createSMESHAction( SMESHOp::OpPopupExportSAUV, "SAUV");
createSMESHAction( SMESHOp::OpPopupExportGMF, "GMF" );
createSMESHAction( SMESHOp::OpFileInformation, "FILE_INFO" );
createSMESHAction( SMESHOp::OpDelete, "DELETE", "ICON_DELETE", Qt::Key_Delete );
createSMESHAction( SMESHOp::OpDisableAutoColor, "DISABLE_AUTO_COLOR" );
// Adaptation - begin
- createSMESHAction( SMESHOp::OpMGAdapt, "MG_ADAPT", "ICON_MG_ADAPT" );
+#ifndef DISABLE_MG_ADAPT
+ createSMESHAction( SMESHOp::OpMGAdapt, "MG_ADAPT", "ICON_MG_ADAPT" );
+#endif
// Adaptation - end
createSMESHAction( SMESHOp::OpMinimumDistance, "MEASURE_MIN_DIST", "ICON_MEASURE_MIN_DIST" );
meshId = createMenu( tr( "MEN_MESH" ), -1, 70, 10 ),
ctrlId = createMenu( tr( "MEN_CTRL" ), -1, 60, 10 ),
modifyId = createMenu( tr( "MEN_MODIFY" ), -1, 40, 10 ),
+#ifndef DISABLE_MG_ADAPT
adaptId = createMenu( tr( "MEN_ADAPT" ), -1, 80, 10 ),
+#endif
measureId = createMenu( tr( "MEN_MEASURE" ), -1, 50, 10 ),
viewId = createMenu( tr( "MEN_VIEW" ), -1, 2 );
#ifdef WITH_CGNS
createMenu( SMESHOp::OpImportCGNS, importId, -1 );
#endif
- createMenu( SMESHOp::OpImportSAUV, importId, -1 );
createMenu( SMESHOp::OpImportGMF, importId, -1 );
createMenu( SMESHOp::OpExportDAT, exportId, -1 );
createMenu( SMESHOp::OpExportMED, exportId, -1 );
#ifdef WITH_CGNS
createMenu( SMESHOp::OpExportCGNS, exportId, -1 );
#endif
- createMenu( SMESHOp::OpExportSAUV, exportId, -1 );
createMenu( SMESHOp::OpExportGMF, exportId, -1 );
createMenu( separator(), fileId, 10 );
createMenu( SMESHOp::OpPatternMapping, modifyId, -1 );
// Adaptation - begin
- createMenu( SMESHOp::OpMGAdapt, adaptId, -1 );
+#ifndef DISABLE_MG_ADAPT
+ createMenu( SMESHOp::OpMGAdapt, adaptId, -1 );
+#endif
// Adaptation - end
createMenu( SMESHOp::OpMinimumDistance, measureId, -1 );
connect( volumeMenu, SIGNAL( aboutToShow() ), this, SLOT( onUpdateControlActions() ) );
// ----- create toolbars --------------
- int meshTb = createTool( tr( "TB_MESH" ), QString( "SMESHMeshToolbar" ) ) ;
+ int meshTb = createTool( tr( "TB_MESH" ), QString( "SMESHMeshToolbar" ) ) ;
createTool( SMESHOp::OpCreateMesh, meshTb );
createTool( SMESHOp::OpCreateSubMesh, meshTb );
createTool( SMESHOp::OpEditMeshOrSubMesh, meshTb );
createTool( SMESHOp::OpEvaluate, meshTb );
createTool( SMESHOp::OpMeshOrder, meshTb );
- int infoTb = createTool( tr( "TB_INFO" ), QString( "SMESHInformationToolbar" ) ) ;
+ int infoTb = createTool( tr( "TB_INFO" ), QString( "SMESHInformationToolbar" ) ) ;
createTool( SMESHOp::OpMeshInformation, infoTb );
//createTool( SMESHOp::OpStdInfo, meshTb );
//createTool( SMESHOp::OpWhatIs, meshTb ); // VSR: issue #0021242 (eliminate "Mesh Element Information" command)
createTool( SMESHOp::OpFindElementByPoint, infoTb );
- int groupTb = createTool( tr( "TB_GROUP" ), QString( "SMESHGroupToolbar" ) ) ;
+ int groupTb = createTool( tr( "TB_GROUP" ), QString( "SMESHGroupToolbar" ) ) ;
createTool( SMESHOp::OpCreateGroup, groupTb );
createTool( SMESHOp::OpCreateGeometryGroup, groupTb );
createTool( SMESHOp::OpConstructGroup, groupTb );
createTool( SMESHOp::OpEditGroup, groupTb );
- int ctrl0dTb = createTool( tr( "TB_CTRL0D" ), QString( "SMESHNodeControlsToolbar" ) ) ;
+ int ctrl0dTb = createTool( tr( "TB_CTRL0D" ), QString( "SMESHNodeControlsToolbar" ) ) ;
createTool( SMESHOp::OpFreeNode, ctrl0dTb );
createTool( SMESHOp::OpEqualNode, ctrl0dTb );
//createTool( SMESHOp::OpNodeConnectivityNb, ctrl0dTb );
- int ctrl1dTb = createTool( tr( "TB_CTRL1D" ), QString( "SMESHEdgeControlsToolbar" ) ) ;
+ int ctrl1dTb = createTool( tr( "TB_CTRL1D" ), QString( "SMESHEdgeControlsToolbar" ) ) ;
createTool( SMESHOp::OpFreeBorder, ctrl1dTb );
createTool( SMESHOp::OpLength, ctrl1dTb );
createTool( SMESHOp::OpConnection, ctrl1dTb );
createTool( SMESHOp::OpEqualEdge, ctrl1dTb );
- int ctrl2dTb = createTool( tr( "TB_CTRL2D" ), QString( "SMESHFaceControlsToolbar" ) ) ;
+ int ctrl2dTb = createTool( tr( "TB_CTRL2D" ), QString( "SMESHFaceControlsToolbar" ) ) ;
createTool( SMESHOp::OpFreeEdge, ctrl2dTb );
createTool( SMESHOp::OpFreeFace, ctrl2dTb );
createTool( SMESHOp::OpBareBorderFace, ctrl2dTb );
createTool( SMESHOp::OpEqualFace, ctrl2dTb );
createTool( SMESHOp::OpDeflection2D, ctrl2dTb );
- int ctrl3dTb = createTool( tr( "TB_CTRL3D" ), QString( "SMESHVolumeControlsToolbar" ) ) ;
+ int ctrl3dTb = createTool( tr( "TB_CTRL3D" ), QString( "SMESHVolumeControlsToolbar" ) ) ;
createTool( SMESHOp::OpAspectRatio3D, ctrl3dTb );
createTool( SMESHOp::OpVolume, ctrl3dTb );
createTool( SMESHOp::OpMaxElementLength3D, ctrl3dTb );
createTool( SMESHOp::OpOverConstrainedVolume, ctrl3dTb );
createTool( SMESHOp::OpEqualVolume, ctrl3dTb );
- int addElemTb = createTool( tr( "TB_ADD" ), QString( "SMESHAddElementToolbar" ) ) ;
+ int addElemTb = createTool( tr( "TB_ADD" ), QString( "SMESHAddElementToolbar" ) ) ;
createTool( SMESHOp::OpNode, addElemTb );
createTool( SMESHOp::OpElem0D, addElemTb );
createTool( SMESHOp::OpElem0DOnElemNodes, addElemTb );
createTool( SMESHOp::OpHexagonalPrism, addElemTb );
createTool( SMESHOp::OpPolyhedron, addElemTb );
- int addNonElemTb = createTool( tr( "TB_ADDNON" ), QString( "SMESHAddElementToolbar" ) ) ;
+ int addNonElemTb = createTool( tr( "TB_ADDNON" ), QString( "SMESHAddElementToolbar" ) ) ;
createTool( SMESHOp::OpQuadraticEdge, addNonElemTb );
createTool( SMESHOp::OpQuadraticTriangle, addNonElemTb );
createTool( SMESHOp::OpBiQuadraticTriangle, addNonElemTb );
createTool( SMESHOp::OpQuadraticHexahedron, addNonElemTb );
createTool( SMESHOp::OpTriQuadraticHexahedron, addNonElemTb );
- int remTb = createTool( tr( "TB_REM" ), QString( "SMESHRemoveToolbar" ) ) ;
+ int remTb = createTool( tr( "TB_REM" ), QString( "SMESHRemoveToolbar" ) ) ;
createTool( SMESHOp::OpRemoveNodes, remTb );
createTool( SMESHOp::OpRemoveElements, remTb );
createTool( SMESHOp::OpRemoveOrphanNodes, remTb );
//createTool( SMESHOp::OpRenumberingNodes, renumbTb );
//createTool( SMESHOp::OpRenumberingElements, renumbTb );
- int transformTb = createTool( tr( "TB_TRANSFORM" ), QString( "SMESHTransformationToolbar" ) ) ;
+ int transformTb = createTool( tr( "TB_TRANSFORM" ), QString( "SMESHTransformationToolbar" ) ) ;
createTool( SMESHOp::OpMergeNodes, transformTb );
createTool( SMESHOp::OpMergeElements, transformTb );
createTool( SMESHOp::OpTranslation, transformTb );
createTool( SMESHOp::OpSewing, transformTb );
createTool( SMESHOp::OpDuplicateNodes, transformTb );
- int modifyTb = createTool( tr( "TB_MODIFY" ), QString( "SMESHModificationToolbar" ) ) ;
+ int modifyTb = createTool( tr( "TB_MODIFY" ), QString( "SMESHModificationToolbar" ) ) ;
createTool( SMESHOp::OpConvertMeshToQuadratic, modifyTb );
createTool( SMESHOp::OpCreateBoundaryElements, modifyTb );
createTool( SMESHOp::OpExtrusion, modifyTb );
createTool( SMESHOp::OpPatternMapping, modifyTb );
// Adaptation - begin
- int adaptTb = createTool( tr( "TB_ADAPTATION" ),QString( "SMESHAdaptationToolbar" ) ) ;
- createTool( SMESHOp::OpMGAdapt, adaptTb );
+#ifndef DISABLE_MG_ADAPT
+ int adaptTb = createTool( tr( "TB_ADAPTATION" ), QString( "SMESHAdaptationToolbar" ) ) ;
+ createTool( SMESHOp::OpMGAdapt, adaptTb );
+#endif
// Adaptation - end
- int measuremTb = createTool( tr( "TB_MEASUREM" ), QString( "SMESHMeasurementsToolbar" ) ) ;
+ int measuremTb = createTool( tr( "TB_MEASUREM" ), QString( "SMESHMeasurementsToolbar" ) ) ;
createTool( SMESHOp::OpMinimumDistance, measuremTb );
- int dispModeTb = createTool( tr( "TB_DISP_MODE" ), QString( "SMESHDisplayModeToolbar" ) );
+ int dispModeTb = createTool( tr( "TB_DISP_MODE" ), QString( "SMESHDisplayModeToolbar" ) );
createTool( SMESHOp::OpUpdate, dispModeTb );
QString lc = "$"; // VSR : instead of QtxPopupSelection::defEquality();
popupMgr()->insert( separator(), -1, 0 );
createPopupItem( SMESHOp::OpConvertMeshToQuadratic, OB, mesh_submesh, "&& " + hasElems );
createPopupItem( SMESHOp::OpCreateBoundaryElements, OB, mesh_group, "&& selcount=1 && dim>=2");
- popupMgr()->insert( separator(), -1, 0 );
// Adaptation - begin
- createPopupItem( SMESHOp::OpMGAdapt, OB, mesh );
+#ifndef DISABLE_MG_ADAPT
+ popupMgr()->insert( separator(), -1, 0 );
+ createPopupItem( SMESHOp::OpMGAdapt, OB, mesh );
+ popupMgr()->insert( separator(), -1, 0 );
+#endif
// Adaptation - end
QString only_one_non_empty = QString( " && %1=1 && numberOfNodes>0" ).arg( dc );
#ifdef WITH_CGNS
createPopupItem( SMESHOp::OpPopupExportCGNS, OB, mesh_group, multiple_non_empty, anId );
#endif
- createPopupItem( SMESHOp::OpPopupExportSAUV, OB, mesh_group, only_one_non_empty, anId );
createPopupItem( SMESHOp::OpPopupExportGMF, OB, mesh_group, only_one_non_empty, anId );
createPopupItem( SMESHOp::OpPopupExportDAT, OB, mesh_group, only_one_non_empty, anId );
#ifdef WITH_CGNS
createPopupItem( SMESHOp::OpPopupImportCGNS, OB, smesh, "", anId );
#endif
- createPopupItem( SMESHOp::OpPopupImportSAUV, OB, smesh, "", anId );
createPopupItem( SMESHOp::OpPopupImportGMF, OB, smesh, "", anId );
createPopupItem( SMESHOp::OpPopupImportDAT, OB, smesh, "", anId );
popupMgr()->insert( separator(), -1, 0 );
<< wrap("MED", "li")
<< wrap("STL", "li")
<< wrap("CGNS", "li")
- << wrap("SAUV", "li")
<< wrap("GMF", "li");
lab = tr("INFO_AVAILABLE_FORMATS") + ":" + wrap(items.join(""), "ul");
items.clear();
setPreferenceProperty( exportgroup, "columns", 2 );
addPreference( tr( "PREF_AUTO_GROUPS" ), exportgroup, LightApp_Preferences::Bool, "SMESH", "auto_groups" );
addPreference( tr( "PREF_SHOW_WARN" ), exportgroup, LightApp_Preferences::Bool, "SMESH", "show_warning" );
+ addPreference( tr( "PREF_MED_SAVE_NUMS" ), exportgroup, LightApp_Preferences::Bool, "SMESH", "med_save_numbers" );
int zTol = addPreference( tr( "PREF_ZTOLERANCE" ), exportgroup, LightApp_Preferences::DblSpin, "SMESH", "med_ztolerance" );
setPreferenceProperty( zTol, "precision", 10 );
setPreferenceProperty( zTol, "min", 0.0000000001 );
int size0d = addPreference(tr("PREF_SIZE_0D"), elemGroup,
LightApp_Preferences::IntSpin, "SMESH", "elem0d_size");
/* int ballSize = addPreference(tr("PREF_BALL_SIZE"), elemGroup,
- LightApp_Preferences::IntSpin, "SMESH", "ball_elem_size"); */
- double ballDiameter = addPreference(tr("PREF_BALL_DIAMETER"), elemGroup,
- LightApp_Preferences::DblSpin, "SMESH", "ball_elem_diameter");
- double ballScale = addPreference(tr("PREF_BALL_SCALE"), elemGroup,
- LightApp_Preferences::DblSpin, "SMESH", "ball_elem_scale");
- int elemW = addPreference(tr("PREF_WIDTH"), elemGroup,
- LightApp_Preferences::IntSpin, "SMESH", "element_width");
- int outW = addPreference(tr("PREF_OUTLINE_WIDTH"), elemGroup,
- LightApp_Preferences::IntSpin, "SMESH", "outline_width");
- int shrink = addPreference(tr("PREF_SHRINK_COEFF"), elemGroup,
- LightApp_Preferences::IntSpin, "SMESH", "shrink_coeff");
+ LightApp_Preferences::IntSpin, "SMESH", "ball_elem_size"); */
+ int ballDiameter = addPreference(tr("PREF_BALL_DIAMETER"), elemGroup,
+ LightApp_Preferences::DblSpin, "SMESH", "ball_elem_diameter");
+ int ballScale = addPreference(tr("PREF_BALL_SCALE"), elemGroup,
+ LightApp_Preferences::DblSpin, "SMESH", "ball_elem_scale");
+ int elemW = addPreference(tr("PREF_WIDTH"), elemGroup,
+ LightApp_Preferences::IntSpin, "SMESH", "element_width");
+ int outW = addPreference(tr("PREF_OUTLINE_WIDTH"), elemGroup,
+ LightApp_Preferences::IntSpin, "SMESH", "outline_width");
+ int shrink = addPreference(tr("PREF_SHRINK_COEFF"), elemGroup,
+ LightApp_Preferences::IntSpin, "SMESH", "shrink_coeff");
setPreferenceProperty( size0d, "min", 1 );
setPreferenceProperty( size0d, "max", 10 );
- // setPreferenceProperty( ballSize, "min", 1 );
- // setPreferenceProperty( ballSize, "max", 10 );
+ // setPreferenceProperty( ballSize, "min", 1 );
+ // setPreferenceProperty( ballSize, "max", 10 );
setPreferenceProperty( ballDiameter, "min", 1e-7 );
setPreferenceProperty( ballDiameter, "max", 1e9 );
addPreference( tr( "SMESH_DISTRIBUTION_COLOR" ), distributionGr, LightApp_Preferences::Color, "SMESH", "distribution_color" );
// Adaptation - begin
+#ifndef DISABLE_MG_ADAPT
// Adaptation tab ------------------------------------------------------------------------
int adaptTab = addPreference( tr( "ADAPT_PREF_TAB_GENERAL" ) );
int bloc, pref ;
aListOfTimeStep << tr( "ADAPT_PREF_MG_ADAPT_TIME_STEP_LAST" );
aListOfTimeStep << tr( "ADAPT_PREF_MG_ADAPT_TIME_STEP_C" );;
setPreferenceProperty( pref, "strings", aListOfTimeStep );
+#endif
// Adaptation - end
-
}
void SMESHGUI::preferencesChanged( const QString& sect, const QString& name )
{
if ( sect=="SMESH" ) {
- float sbX1 = 0.01, sbY1 = 0.01, sbW = 0.08, sbH = 0.08;
- float aTol = 1.00000009999999;
+ double sbX1 = 0.01, sbY1 = 0.01, sbW = 0.08, sbH = 0.08;
+ double aTol = 1.00000009999999;
std::string aWarning;
SUIT_ResourceMgr* aResourceMgr = SMESH::GetResourceMgr(this);
case SMESHOp::OpElem0DOnElemNodes: // Create 0D elements on all nodes
op = new SMESHGUI_Add0DElemsOnAllNodesOp();
break;
- // Adaptation - begin
- case SMESHOp::OpMGAdapt:
- break;
- // Adaptation - end
default:
break;
}