-// Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2019 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
#include "SMDS_FacePosition.hxx"
#include "SMDS_IteratorOnIterators.hxx"
#include "SMDS_VolumeTool.hxx"
+#include "SMESHDS_Mesh.hxx"
#include "SMESH_Block.hxx"
#include "SMESH_HypoFilter.hxx"
+#include "SMESH_Mesh.hxx"
#include "SMESH_MeshAlgos.hxx"
+#include "SMESH_MeshEditor.hxx"
#include "SMESH_ProxyMesh.hxx"
#include "SMESH_subMesh.hxx"
namespace {
- inline SMESH_TNodeXYZ XYZ(const SMDS_MeshNode* n) { return SMESH_TNodeXYZ(n); }
+ inline SMESH_NodeXYZ XYZ(const SMDS_MeshNode* n) { return SMESH_NodeXYZ(n); }
enum { U_periodic = 1, V_periodic = 2 };
}
}
}
+//================================================================================
+/*!
+ * \brief Return SMESH_Gen
+ */
+//================================================================================
+
+SMESH_Gen* SMESH_MesherHelper::GetGen() const
+{
+ return GetMesh()->GetGen();
+}
+
+//================================================================================
+/*!
+ * \brief Return mesh DS
+ */
+//================================================================================
+
+SMESHDS_Mesh* SMESH_MesherHelper::GetMeshDS() const
+{
+ return GetMesh()->GetMeshDS();
+}
+
//=======================================================================
//function : IsQuadraticSubMesh
-//purpose : Check submesh for given shape: if all elements on this shape
+//purpose : Check sub-meshes of a given shape: if all elements on sub-shapes
// are quadratic, quadratic elements will be created.
-// Also fill myTLinkNodeMap
+// Fill myTLinkNodeMap
//=======================================================================
bool SMESH_MesherHelper::IsQuadraticSubMesh(const TopoDS_Shape& aSh)
SMESHDS_Mesh* meshDS = GetMeshDS();
// we can create quadratic elements only if all elements
// created on sub-shapes of given shape are quadratic
- // also we have to fill myTLinkNodeMap
myCreateQuadratic = true;
- mySeamShapeIds.clear();
- myDegenShapeIds.clear();
TopAbs_ShapeEnum subType( aSh.ShapeType()==TopAbs_FACE ? TopAbs_EDGE : TopAbs_FACE );
if ( aSh.ShapeType()==TopAbs_COMPOUND )
{
}
SMDSAbs_ElementType elemType( subType==TopAbs_FACE ? SMDSAbs_Face : SMDSAbs_Edge );
-
- //int nbOldLinks = myTLinkNodeMap.size();
-
if ( !myMesh->HasShapeToMesh() )
{
if (( myCreateQuadratic = myMesh->NbFaces( ORDER_QUADRATIC )))
double u2 = uv1.Coord(1);
myPar1[0] = Min( u1, u2 );
myPar2[0] = Max( u1, u2 );
+ myParIndex |= U_periodic;
}
else
{
double v2 = uv1.Coord(2);
myPar1[1] = Min( v1, v2 );
myPar2[1] = Max( v1, v2 );
+ myParIndex |= V_periodic;
}
}
else //if ( !isSeam )
{
double f,l, r = 0.2345;
Handle(Geom2d_Curve) C2d = BRep_Tool::CurveOnSurface( edge, face, f, l );
- uv2 = C2d->Value( f * r + l * ( 1.-r ));
- if ( du < Precision::PConfusion() )
- isSeam = ( Abs( uv1.Coord(1) - uv2.Coord(1) ) < Precision::PConfusion() );
+ if ( C2d.IsNull() )
+ {
+ isSeam = false;
+ }
else
- isSeam = ( Abs( uv1.Coord(2) - uv2.Coord(2) ) < Precision::PConfusion() );
+ {
+ uv2 = C2d->Value( f * r + l * ( 1.-r ));
+ if ( du < Precision::PConfusion() )
+ isSeam = ( Abs( uv1.Coord(1) - uv2.Coord(1) ) < Precision::PConfusion() );
+ else
+ isSeam = ( Abs( uv1.Coord(2) - uv2.Coord(2) ) < Precision::PConfusion() );
+ }
}
}
if ( isSeam )
}
}
+//=======================================================================
+/*!
+ * \brief Copy shape information from another helper. Used to improve performance
+ * since SetSubShape() can be time consuming if there are many edges
+ */
+//=======================================================================
+
+void SMESH_MesherHelper::CopySubShapeInfo(const SMESH_MesherHelper& other)
+{
+ this->myShape = other.myShape;
+ this->myShapeID = other.myShapeID;
+ this->myDegenShapeIds = other.myDegenShapeIds;
+ this->mySeamShapeIds = other.mySeamShapeIds;
+ this->myPar1[0] = other.myPar1[0];
+ this->myPar1[1] = other.myPar1[1];
+ this->myPar2[0] = other.myPar2[0];
+ this->myPar2[1] = other.myPar2[1];
+ this->myParIndex = other.myParIndex;
+ this->myFace2Surface = other.myFace2Surface;
+}
+
+//=======================================================================
+//function : ShapeToIndex
+//purpose : Convert a shape to its index in the SMESHDS_Mesh
+//=======================================================================
+
+int SMESH_MesherHelper::ShapeToIndex( const TopoDS_Shape& S ) const
+{
+ return GetMeshDS()->ShapeToIndex( S );
+}
+
//=======================================================================
//function : GetNodeUVneedInFaceNode
//purpose : Check if inFaceNode argument is necessary for call GetNodeUV(F,..)
{
gp_Pnt2d uv( Precision::Infinite(), Precision::Infinite() );
- const SMDS_PositionPtr Pos = n->GetPosition();
+ SMDS_PositionPtr pos = n->GetPosition();
bool uvOK = false;
- if ( Pos->GetTypeOfPosition() == SMDS_TOP_FACE )
+ if ( pos->GetTypeOfPosition() == SMDS_TOP_FACE )
{
// node has position on face
- const SMDS_FacePosition* fpos = static_cast<const SMDS_FacePosition*>( Pos );
+ SMDS_FacePositionPtr fpos = pos;
uv.SetCoord( fpos->GetUParameter(), fpos->GetVParameter() );
if ( check )
uvOK = CheckNodeUV( F, n, uv.ChangeCoord(), 2.*getFaceMaxTol( F )); // 2. from 22830
}
- else if ( Pos->GetTypeOfPosition() == SMDS_TOP_EDGE )
+ else if ( pos->GetTypeOfPosition() == SMDS_TOP_EDGE )
{
// node has position on EDGE => it is needed to find
// corresponding EDGE from FACE, get pcurve for this
// EDGE and retrieve value from this pcurve
- const SMDS_EdgePosition* epos = static_cast<const SMDS_EdgePosition*>( Pos );
+ SMDS_EdgePositionPtr epos = pos;
const int edgeID = n->getshapeId();
const TopoDS_Edge& E = TopoDS::Edge( GetMeshDS()->IndexToShape( edgeID ));
double f, l, u = epos->GetUParameter();
uv = newUV;
}
}
- else if ( Pos->GetTypeOfPosition() == SMDS_TOP_VERTEX )
+ else if ( pos->GetTypeOfPosition() == SMDS_TOP_VERTEX )
{
if ( int vertexID = n->getshapeId() ) {
const TopoDS_Vertex& V = TopoDS::Vertex(GetMeshDS()->IndexToShape(vertexID));
{
if ( !IsSubShape( V, F ))
{
- MESSAGE ( "SMESH_MesherHelper::GetNodeUV(); Vertex " << vertexID
- << " not in face " << GetMeshDS()->ShapeToIndex( F ) );
+ MESSAGE("GetNodeUV() Vertex "<< vertexID <<" not in face "<< GetMeshDS()->ShapeToIndex(F));
// get UV of a vertex closest to the node
double dist = 1e100;
gp_Pnt pn = XYZ( n );
if ( !C2d.IsNull() ) {
double u = ( V == IthVertex( 0, edge )) ? f : l;
uv = C2d->Value( u );
- uvOK = true;
+ gp_Pnt p = GetSurface( F )->Value( uv );
+ uvOK = ( p.Distance( BRep_Tool::Pnt( V )) < getFaceMaxTol( F ));
break;
}
}
// check that uv is correct
TopLoc_Location loc;
Handle(Geom_Surface) surface = BRep_Tool::Surface( F,loc );
- gp_Pnt nodePnt = XYZ( n ), surfPnt(0,0,0);
+ SMESH_NodeXYZ nXYZ( n );
+ gp_Pnt nodePnt = nXYZ, surfPnt(0,0,0);
double dist = 0;
if ( !loc.IsIdentity() ) nodePnt.Transform( loc.Transformation().Inverted() );
if ( infinit ||
(dist = nodePnt.Distance( surfPnt = surface->Value( uv.X(), uv.Y() ))) > tol )
{
setPosOnShapeValidity( shapeID, false );
- if ( !infinit && distXYZ ) {
- surfPnt.Transform( loc );
- distXYZ[0] = dist;
- distXYZ[1] = surfPnt.X(); distXYZ[2] = surfPnt.Y(); distXYZ[3]=surfPnt.Z();
- }
// uv incorrect, project the node to surface
- GeomAPI_ProjectPointOnSurf& projector = GetProjector( F, loc, tol );
- projector.Perform( nodePnt );
- if ( !projector.IsDone() || projector.NbPoints() < 1 )
- {
- MESSAGE( "SMESH_MesherHelper::CheckNodeUV() failed to project" );
- return false;
- }
- Quantity_Parameter U,V;
- projector.LowerDistanceParameters(U,V);
- uv.SetCoord( U,V );
- surfPnt = surface->Value( U, V );
- dist = nodePnt.Distance( surfPnt );
+ Handle(ShapeAnalysis_Surface) sprojector = GetSurface( F );
+ uv = sprojector->ValueOfUV( nXYZ, tol ).XY();
+ surfPnt = sprojector->Value( uv );
+ dist = surfPnt.Distance( nXYZ );
if ( distXYZ ) {
- surfPnt.Transform( loc );
distXYZ[0] = dist;
distXYZ[1] = surfPnt.X(); distXYZ[2] = surfPnt.Y(); distXYZ[3]=surfPnt.Z();
}
// store the fixed UV on the face
if ( myShape.IsSame(F) && shapeID == myShapeID && myFixNodeParameters )
const_cast<SMDS_MeshNode*>(n)->SetPosition
- ( SMDS_PositionPtr( new SMDS_FacePosition( U, V )));
+ ( SMDS_PositionPtr( new SMDS_FacePosition( uv.X(), uv.Y() )));
}
else if ( myShape.IsSame(F) && uv.Modulus() > numeric_limits<double>::min() )
{
//=======================================================================
//function : GetProjector
-//purpose : Return projector intitialized by given face without location, which is returned
+//purpose : Return projector initialized by given face without location, which is returned
//=======================================================================
GeomAPI_ProjectPointOnSurf& SMESH_MesherHelper::GetProjector(const TopoDS_Face& F,
const SMDS_PositionPtr pos = n->GetPosition();
if ( pos->GetTypeOfPosition()==SMDS_TOP_EDGE )
{
- const SMDS_EdgePosition* epos = static_cast<const SMDS_EdgePosition*>( pos );
- param = epos->GetUParameter();
+ param = pos->GetParameters()[0];
}
else if( pos->GetTypeOfPosition() == SMDS_TOP_VERTEX )
{
int vertexID = n->getshapeId();
const TopoDS_Vertex& V = TopoDS::Vertex(meshDS->IndexToShape(vertexID));
param = BRep_Tool::Parameter( V, E );
+
+ if ( inEdgeNode )
+ {
+ BRepAdaptor_Curve curve( E );
+ if ( curve.IsPeriodic() )
+ {
+ double uInEdge = GetNodeU( E, inEdgeNode );
+ param += ShapeAnalysis::AdjustByPeriod( param, uInEdge, curve.Period() );
+ }
+ }
}
}
if ( check )
MESSAGE( "SMESH_MesherHelper::CheckNodeU() failed to project" );
return false;
}
- Quantity_Parameter U = projector->LowerDistanceParameter();
+ Standard_Real U = projector->LowerDistanceParameter();
u = double( U );
- MESSAGE(" f " << f << " l " << l << " u " << u);
curvPnt = curve->Value( u );
dist = nodePnt.Distance( curvPnt );
if ( distXYZ ) {
}
if ( dist > tol )
{
- MESSAGE( "SMESH_MesherHelper::CheckNodeU(), invalid projection" );
- MESSAGE("distance " << dist << " " << tol );
+ MESSAGE( "CheckNodeU(), invalid projection; distance " << dist << "; tol " << tol );
return false;
}
// store the fixed U on the edge
// get type of shape for the new medium node
int faceID = -1, edgeID = -1;
- TopoDS_Edge E; double u [2];
+ TopoDS_Edge E; double u [2] = {0.,0.};
TopoDS_Face F; gp_XY uv[2];
bool uvOK[2] = { true, true };
const bool useCurSubShape = ( !myShape.IsNull() && myShape.ShapeType() == TopAbs_EDGE );
// get positions of the given nodes on shapes
if ( pos.second == TopAbs_FACE )
{
- F = TopoDS::Face(meshDS->IndexToShape( faceID = pos.first ));
+ F = TopoDS::Face( meshDS->IndexToShape( faceID = pos.first ));
uv[0] = GetNodeUV(F,n1,n2, force3d ? 0 : &uvOK[0]);
- if (( !force3d ) &&
- ( HasDegeneratedEdges() || GetSurface( F )->HasSingularities( 1e-7 )))
- {
- // IPAL52850 (degen VERTEX not at singularity)
- // project middle point to a surface
- SMESH_TNodeXYZ p1( n1 ), p2( n2 );
- gp_Pnt pMid = 0.5 * ( p1 + p2 );
- Handle(ShapeAnalysis_Surface) projector = GetSurface( F );
- gp_Pnt2d uvMid;
- if ( uvOK[0] )
- uvMid = projector->NextValueOfUV( uv[0], pMid, BRep_Tool::Tolerance( F ));
- else
- uvMid = projector->ValueOfUV( pMid, getFaceMaxTol( F ));
- if ( projector->Gap() * projector->Gap() < ( p1 - p2 ).SquareModulus() / 4 )
- {
- gp_Pnt pProj = projector->Value( uvMid );
- n12 = meshDS->AddNode( pProj.X(), pProj.Y(), pProj.Z() );
- meshDS->SetNodeOnFace( n12, faceID, uvMid.X(), uvMid.Y() );
- myTLinkNodeMap.insert( make_pair ( link, n12 ));
- return n12;
- }
- }
uv[1] = GetNodeUV(F,n2,n1, force3d ? 0 : &uvOK[1]);
}
else if ( pos.second == TopAbs_EDGE )
// nodes, else - medium between corresponding 3d points
if( ! F.IsNull() )
{
- //if ( uvOK[0] && uvOK[1] )
+ if ( IsDegenShape( n1->getshapeId() )) {
+ if ( myParIndex & U_periodic ) uv[0].SetCoord( 1, uv[1].Coord( 1 ));
+ else uv[0].SetCoord( 2, uv[1].Coord( 2 ));
+ }
+ else if ( IsDegenShape( n2->getshapeId() )) {
+ if ( myParIndex & U_periodic ) uv[1].SetCoord( 1, uv[0].Coord( 1 ));
+ else uv[1].SetCoord( 2, uv[0].Coord( 2 ));
+ }
+ TopLoc_Location loc;
+ Handle(Geom_Surface) S = BRep_Tool::Surface(F,loc);
+ gp_XY UV = GetMiddleUV( S, uv[0], uv[1] );
+ gp_Pnt P = S->Value( UV.X(), UV.Y() ).Transformed(loc);
+
+ SMESH_TNodeXYZ p1( n1 ), p2( n2 );
+ gp_Pnt pMid = 0.5 * ( p1 + p2 );
+ double distMid = pMid.SquareDistance( P );
+ double dist12 = ( p1 - p2 ).SquareModulus();
+ Handle(ShapeAnalysis_Surface) surfInfo = GetSurface( F );
+ if ( distMid > dist12 ||
+ HasDegeneratedEdges() ||
+ surfInfo->HasSingularities( 1e-7 ) )
{
- if ( IsDegenShape( n1->getshapeId() )) {
- if ( myParIndex & U_periodic ) uv[0].SetCoord( 1, uv[1].Coord( 1 ));
- else uv[0].SetCoord( 2, uv[1].Coord( 2 ));
- }
- else if ( IsDegenShape( n2->getshapeId() )) {
- if ( myParIndex & U_periodic ) uv[1].SetCoord( 1, uv[0].Coord( 1 ));
- else uv[1].SetCoord( 2, uv[0].Coord( 2 ));
- }
- TopLoc_Location loc;
- Handle(Geom_Surface) S = BRep_Tool::Surface(F,loc);
- gp_XY UV = GetMiddleUV( S, uv[0], uv[1] );
- gp_Pnt P = S->Value( UV.X(), UV.Y() ).Transformed(loc);
- n12 = meshDS->AddNode(P.X(), P.Y(), P.Z());
- // if ( mySetElemOnShape ) node is not elem!
- meshDS->SetNodeOnFace(n12, faceID, UV.X(), UV.Y());
- myTLinkNodeMap.insert(make_pair(link,n12));
- return n12;
+ // IPAL52850 (degen VERTEX not at singularity)
+ // project middle point to a surface
+ gp_Pnt2d uvMid;
+ if ( uvOK[0] )
+ uvMid = surfInfo->NextValueOfUV( uv[0], pMid, BRep_Tool::Tolerance( F ));
+ else
+ uvMid = surfInfo->ValueOfUV( pMid, getFaceMaxTol( F ));
+ if ( surfInfo->Gap() * surfInfo->Gap() < distMid )
+ P = surfInfo->Value( uvMid );
}
+ n12 = meshDS->AddNode(P.X(), P.Y(), P.Z());
+ // if ( mySetElemOnShape ) node is not elem!
+ meshDS->SetNodeOnFace(n12, faceID, UV.X(), UV.Y());
+ myTLinkNodeMap.insert(make_pair(link,n12));
+ return n12;
}
else if ( !E.IsNull() )
{
if ( !bestEdge.IsNull() )
{
- // move n12 to position of a successfull projection
+ // move n12 to position of a successful projection
//double tol = BRep_Tool::Tolerance(edges[ iOkEdge ]);
if ( !force3d /*&& distMiddleProj > 2*tol*/ )
{
const SMDS_MeshNode* n14 = GetMediumNode( n1, n4, force3d, TopAbs_SOLID );
const SMDS_MeshNode* n25 = GetMediumNode( n2, n5, force3d, TopAbs_SOLID );
const SMDS_MeshNode* n36 = GetMediumNode( n3, n6, force3d, TopAbs_SOLID );
+ if ( myCreateBiQuadratic )
+ {
+ const SMDS_MeshNode* n1245 = GetCentralNode( n1,n2,n4,n5,n12,n25,n45,n14,force3d );
+ const SMDS_MeshNode* n1346 = GetCentralNode( n1,n3,n4,n6,n31,n36,n64,n14,force3d );
+ const SMDS_MeshNode* n2356 = GetCentralNode( n2,n3,n6,n5,n23,n36,n56,n25,force3d );
- if(id)
- elem = meshDS->AddVolumeWithID(n1, n2, n3, n4, n5, n6,
- n12, n23, n31, n45, n56, n64, n14, n25, n36, id);
+ if(id)
+ elem = meshDS->AddVolumeWithID(n1, n2, n3, n4, n5, n6,
+ n12, n23, n31, n45, n56, n64, n14, n25, n36,
+ n1245, n2356, n1346, id);
+ else
+ elem = meshDS->AddVolume(n1, n2, n3, n4, n5, n6,
+ n12, n23, n31, n45, n56, n64, n14, n25, n36,
+ n1245, n2356, n1346);
+ }
else
- elem = meshDS->AddVolume(n1, n2, n3, n4, n5, n6,
- n12, n23, n31, n45, n56, n64, n14, n25, n36);
+ {
+ if(id)
+ elem = meshDS->AddVolumeWithID(n1, n2, n3, n4, n5, n6,
+ n12, n23, n31, n45, n56, n64, n14, n25, n36, id);
+ else
+ elem = meshDS->AddVolume(n1, n2, n3, n4, n5, n6,
+ n12, n23, n31, n45, n56, n64, n14, n25, n36);
+ }
}
if ( mySetElemOnShape && myShapeID > 0 )
meshDS->SetMeshElementOnShape( elem, myShapeID );
}
// get nodes on theBaseEdge sorted by param on edge and initialize theParam2ColumnMap with them
+ const SMDS_MeshNode* prevEndNodes[2] = { 0, 0 };
edge = theBaseSide.begin();
for ( int iE = 0; edge != theBaseSide.end(); ++edge, ++iE )
{
const double prevPar = theParam2ColumnMap.empty() ? 0 : theParam2ColumnMap.rbegin()->first;
for ( u_n = sortedBaseNN.begin(); u_n != sortedBaseNN.end(); u_n++ )
{
+ if ( u_n->second == prevEndNodes[0] ||
+ u_n->second == prevEndNodes[1] )
+ continue;
double par = prevPar + coeff * ( u_n->first - f );
TParam2ColumnMap::iterator u2nn =
theParam2ColumnMap.insert( theParam2ColumnMap.end(), make_pair( par, TNodeColumn()));
u2nn->second.push_back( u_n->second );
}
+ prevEndNodes[0] = sortedBaseNN.begin()->second;
+ prevEndNodes[1] = sortedBaseNN.rbegin()->second;
}
if ( theParam2ColumnMap.size() < 2 )
return false;
}
// nb rows of nodes
- size_t prevNbRows = theParam2ColumnMap.begin()->second.size(); // current, at least 1 here
+ size_t prevNbRows = theParam2ColumnMap.begin()->second.size(); // current, at least 1 here
size_t expectNbRows = faceSubMesh->NbElements() / ( theParam2ColumnMap.size()-1 ); // to be added
// fill theParam2ColumnMap column by column by passing from nodes on
//purpose : Return true if 2D mesh on FACE is ditorted
//=======================================================================
-bool SMESH_MesherHelper::IsDistorted2D( SMESH_subMesh* faceSM,
- bool checkUV)
+bool SMESH_MesherHelper::IsDistorted2D( SMESH_subMesh* faceSM,
+ bool checkUV,
+ SMESH_MesherHelper* faceHelper)
{
if ( !faceSM || faceSM->GetSubShape().ShapeType() != TopAbs_FACE )
return false;
bool haveBadFaces = false;
SMESH_MesherHelper helper( *faceSM->GetFather() );
+ if ( faceHelper )
+ helper.CopySubShapeInfo( *faceHelper );
helper.SetSubShape( faceSM->GetSubShape() );
const TopoDS_Face& F = TopoDS::Face( faceSM->GetSubShape() );
SMESHDS_SubMesh* smDS = helper.GetMeshDS()->MeshElements( F );
if ( !smDS || smDS->NbElements() == 0 ) return false;
+ bool subIdsValid = true; // shape ID of nodes is OK
+ if ( helper.HasSeam() )
+ {
+ // check if nodes are bound to seam edges
+ SMESH_subMeshIteratorPtr smIt = faceSM->getDependsOnIterator(/*includeSelf=*/false);
+ while ( smIt->more() && subIdsValid )
+ {
+ SMESH_subMesh* sm = smIt->next();
+ if ( helper.IsSeamShape( sm->GetId() ) && sm->IsEmpty() )
+ subIdsValid = false;
+ }
+ }
SMDS_ElemIteratorPtr faceIt = smDS->GetElements();
double prevArea = 0;
vector< const SMDS_MeshNode* > nodes;
for ( size_t i = 0; i < nodes.size(); ++n, ++i )
nodes[ i ] = *n;
- // avoid elems on degenarate shapes as UV on them can be wrong
+ // avoid elems on degenerate shapes as UV on them can be wrong
if ( helper.HasDegeneratedEdges() )
{
bool isOnDegen = false;
if ( isOnDegen )
continue;
}
- // prepare to getting UVs
+ // prepare for getting UVs
const SMDS_MeshNode* inFaceNode = 0;
if ( helper.HasSeam() ) {
for ( size_t i = 0; ( i < nodes.size() && !inFaceNode ); ++i )
if ( !helper.IsSeamShape( nodes[ i ]->getshapeId() ))
+ {
inFaceNode = nodes[ i ];
+ if ( !subIdsValid )
+ {
+ gp_XY uv = helper.GetNodeUV( F, inFaceNode );
+ if ( helper.IsOnSeam( uv ))
+ inFaceNode = NULL;
+ }
+ }
if ( !inFaceNode )
continue;
}
for ( size_t i = 0; i < nodes.size(); ++i )
uv[ i ] = helper.GetNodeUV( F, nodes[ i ], inFaceNode, toCheckUV );
+ if ( !subIdsValid ) // fix uv on seam
+ {
+ gp_XY uvInFace = helper.GetNodeUV( F, inFaceNode );
+ for ( size_t i = 0; i < uv.size(); ++i )
+ if ( helper.IsOnSeam( uv[i] ))
+ uv[i] = helper.getUVOnSeam( uv[i], uvInFace ).XY();
+ }
+
// compare orientation of triangles
double faceArea = 0;
for ( int iT = 0, nbT = nodes.size()-2; iT < nbT; ++iT )
* \brief Find out elements orientation on a geometrical face
* \param theFace - The face correctly oriented in the shape being meshed
* \retval bool - true if the face normal and the normal of first element
- * in the correspoding submesh point in different directions
+ * in the corresponding submesh point in different directions
*/
//================================================================================
TopoDS_Shape s0 = GetSubShapeByNode( nn[0], GetMeshDS() );
TopoDS_Shape s1 = GetSubShapeByNode( nn[1], GetMeshDS() );
TopoDS_Shape E = GetCommonAncestor( s0, s1, *myMesh, TopAbs_EDGE );
- if ( !E.IsNull() && !s0.IsSame( s1 ))
+ if ( !E.IsNull() && !s0.IsSame( s1 ) && E.Orientation() != TopAbs_INTERNAL )
{
// is E seam edge?
int nb = 0;
bool ok = true;
double u0 = GetNodeU( TopoDS::Edge( E ), nn[0], nn[1], &ok );
double u1 = GetNodeU( TopoDS::Edge( E ), nn[1], nn[0], &ok );
- // check that the 2 nodes are connected with a segment (IPAL53055)
- if ( SMESHDS_SubMesh* sm = GetMeshDS()->MeshElements( E ))
- if ( sm->NbElements() > 0 && !GetMeshDS()->FindEdge( nn[0], nn[1] ))
- ok = false;
+ if ( ok )
+ {
+ // check that the 2 nodes are connected with a segment (IPAL53055)
+ ok = false;
+ const SMDS_MeshElement* seg;
+ if ( SMESHDS_SubMesh* sm = GetMeshDS()->MeshElements( E ))
+ if (( sm->NbElements() > 0 ) &&
+ ( seg = GetMeshDS()->FindEdge( nn[0], nn[1] )))
+ ok = sm->Contains( seg );
+ }
if ( ok )
{
isReversed = ( u0 > u1 );
//=======================================================================
//function : IsSubShape
-//purpose :
+//purpose :
//=======================================================================
bool SMESH_MesherHelper::IsSubShape( const TopoDS_Shape& shape,
if ( shape.IsSame( exp.Current() ))
return true;
}
- SCRUTE((shape.IsNull()));
- SCRUTE((mainShape.IsNull()));
return false;
}
* of the FACE normal
* \return double - the angle (between -Pi and Pi), negative if the angle is concave,
* 1e100 in case of failure
- * \waring Care about order of the EDGEs and their orientation to be as they are
+ * \warning Care about order of the EDGEs and their orientation to be as they are
* within the FACE! Don't pass degenerated EDGEs neither!
*/
//================================================================================
return fabs(param-myPar1[i]) < fabs(param-myPar2[i]) ? myPar2[i] : myPar1[i];
}
+//=======================================================================
+//function : NbRealSeam
+//purpose : Return a number of real seam edges in the shape set through
+// IsQuadraticSubMesh() or SetSubShape(). A real seam edge encounters twice in a wire
+//=======================================================================
+
+size_t SMESH_MesherHelper::NbRealSeam() const
+{
+ size_t nb = 0;
+
+ std::set< int >::const_iterator id = mySeamShapeIds.begin();
+ for ( ; id != mySeamShapeIds.end(); ++id )
+ if ( *id < 0 ) ++nb;
+ else break;
+
+ return nb;
+}
+
+//=======================================================================
+//function : IsOnSeam
+//purpose : Check if UV is on seam. Return 0 if not, 1 for U seam, 2 for V seam
+//=======================================================================
+
+int SMESH_MesherHelper::IsOnSeam(const gp_XY& uv) const
+{
+ for ( int i = U_periodic; i <= V_periodic ; ++i )
+ if ( myParIndex & i )
+ {
+ double p = uv.Coord( i );
+ double tol = ( myPar2[i-1] - myPar1[i-1] ) / 100.;
+ if ( Abs( p - myPar1[i-1] ) < tol ||
+ Abs( p - myPar2[i-1] ) < tol )
+ return i;
+ }
+ return 0;
+}
+
namespace {
//=======================================================================
TopTools_ListIteratorOfListOfShape _ancIter;
TopAbs_ShapeEnum _type;
TopTools_MapOfShape _encountered;
- TAncestorsIterator( const TopTools_ListOfShape& ancestors, TopAbs_ShapeEnum type)
+ TopTools_IndexedMapOfShape _allowed;
+ TAncestorsIterator( const TopTools_ListOfShape& ancestors,
+ TopAbs_ShapeEnum type,
+ const TopoDS_Shape* container/* = 0*/)
: _ancIter( ancestors ), _type( type )
{
+ if ( container && !container->IsNull() )
+ TopExp::MapShapes( *container, type, _allowed);
if ( _ancIter.More() ) {
- if ( _ancIter.Value().ShapeType() != _type ) next();
+ if ( !isCurrentAllowed() ) next();
else _encountered.Add( _ancIter.Value() );
}
}
const TopoDS_Shape* s = _ancIter.More() ? & _ancIter.Value() : 0;
if ( _ancIter.More() )
for ( _ancIter.Next(); _ancIter.More(); _ancIter.Next())
- if ( _ancIter.Value().ShapeType() == _type && _encountered.Add( _ancIter.Value() ))
+ if ( isCurrentAllowed() && _encountered.Add( _ancIter.Value() ))
break;
return s;
}
+ bool isCurrentAllowed()
+ {
+ return (( _ancIter.Value().ShapeType() == _type ) &&
+ ( _allowed.IsEmpty() || _allowed.Contains( _ancIter.Value() )));
+ }
};
} // namespace
//=======================================================================
/*!
- * \brief Return iterator on ancestors of the given type
+ * \brief Return iterator on ancestors of the given type, included into a container shape
*/
//=======================================================================
PShapeIteratorPtr SMESH_MesherHelper::GetAncestors(const TopoDS_Shape& shape,
const SMESH_Mesh& mesh,
- TopAbs_ShapeEnum ancestorType)
+ TopAbs_ShapeEnum ancestorType,
+ const TopoDS_Shape* container)
{
- return PShapeIteratorPtr( new TAncestorsIterator( mesh.GetAncestors(shape), ancestorType));
+ return PShapeIteratorPtr
+ ( new TAncestorsIterator( mesh.GetAncestors(shape), ancestorType, container));
}
//=======================================================================
* \brief Make up a chain of links
* \param iSide - link to add first
* \param chain - chain to fill in
- * \param pos - postion of medium nodes the links should have
+ * \param pos - position of medium nodes the links should have
* \param error - out, specifies what is wrong
* \retval bool - false if valid chain can't be built; "valid" means that links
* of the chain belongs to rectangles bounding hexahedrons
if ( _sideIsAdded[ iSide ]) // already in chain
return true;
- if ( _sides.size() != 4 ) { // triangle - visit all my continous faces
+ if ( _sides.size() != 4 ) { // triangle - visit all my continuous faces
MSGBEG( *this );
TLinkSet links;
list< const QFace* > faces( 1, this );
if ( link->MediumPos() >= pos ) {
int nbLinkFaces = link->_faces.size();
if ( nbLinkFaces == 4 || (/*nbLinkFaces < 4 && */link->OnBoundary())) {
- // hexahedral mesh or boundary quadrangles - goto a continous face
+ // hexahedral mesh or boundary quadrangles - goto a continuous face
if ( const QFace* f = link->GetContinuesFace( this ))
if ( f->_sides.size() == 4 )
return f->GetLinkChain( *chLink, chain, pos, error );
* \brief Move medium node of theLink according to its distance from boundary
* \param theLink - link to fix
* \param theRefVec - movement of boundary
- * \param theLinks - all adjacent links of continous triangles
+ * \param theLinks - all adjacent links of continuous triangles
* \param theFaceHelper - helper is not used so far
* \param thePrevLen - distance from the boundary
* \param theStep - number of steps till movement propagation limit
{
// code is valid for convex faces only
gp_XYZ gc(0,0,0);
- for ( TIDSortedNodeSet::const_iterator n = begin(); n!=end(); ++n)
- gc += XYZ( *n ) / size();
- for (unsigned i = 0; i < _sides.size(); ++i )
+ for ( TIDSortedNodeSet::const_iterator n = begin(); n != end(); ++n )
+ gc += XYZ( *n ) / double( size() );
+ for ( size_t i = 0; i < _sides.size(); ++i )
{
if ( _sides[i] == bentLink ) continue;
gp_Vec linkNorm = _normal ^ gp_Vec( XYZ(_sides[i]->node1()), XYZ(_sides[i]->node2()));
return true;
}
return false;
-
+
}
//================================================================================
/*!
- * \brief Find pairs of continues faces
+ * \brief Find pairs of continues faces
*/
//================================================================================
// | Between _faces of link x2 two vertical faces are continues
// x1----x2-----x3 and two horizontal faces are continues. We set vertical faces
// | to _faces[0] and _faces[1] and horizontal faces to
- // v2 | v3 _faces[2] and _faces[3] (or vise versa).
+ // v2 | v3 _faces[2] and _faces[3] (or vice versa).
// x4
if ( _faces.empty() )
vector< TChain> & resultChains,
SMDS_TypeOfPosition pos )
{
- // put links in the set and evalute number of result chains by number of boundary links
+ // put links in the set and evaluate number of result chains by number of boundary links
TLinkSet linkSet;
size_t nbBndLinks = 0;
for ( TChain::iterator lnk = allLinks.begin(); lnk != allLinks.end(); ++lnk ) {
TopoDS_Shape shape = theHelper.GetSubShape().Oriented( TopAbs_FORWARD );
if ( shape.IsNull() ) return;
- if ( !theError ) theError = SMESH_ComputeError::New();
-
+ if ( !dynamic_cast<SMESH_BadInputElements*>( theError.get() ))
+ {
+ if ( !theError )
+ theError.reset( new SMESH_BadInputElements( meshDS ));
+ else
+ theError.reset( new SMESH_BadInputElements( meshDS,
+ theError->myName,
+ theError->myComment,
+ theError->myAlgo));
+ }
gp_XYZ faceNorm;
if ( shape.ShapeType() == TopAbs_FACE ) // 2D
const SMDS_MeshElement* f = faceIt->next();
if ( !faceSM->Contains( f ) ||
f->NbNodes() < 6 || // check quadratic triangles only
+ f->NbNodes() > 7 ||
!checkedFaces.insert( f ).second )
continue;
gp_XYZ pMid3D = 0.5 * ( pN0 + SMESH_TNodeXYZ( nOnEdge[1] ));
meshDS->MoveNode( n, pMid3D.X(), pMid3D.Y(), pMid3D.Z() );
MSG( "move OUT of face " << n );
- theError->myBadElements.push_back( f );
+ static_cast<SMESH_BadInputElements*>( theError.get() )->add( f );
}
}
}
}
}
- if ( !theError->myBadElements.empty() )
+ if ( theError->HasBadElems() )
theError->myName = EDITERR_NO_MEDIUM_ON_GEOM;
return;
< const SMDS_MeshElement*, vector< SMDS_ElemIteratorPtr > > TIterOnIter;
SMDS_ElemIteratorPtr faceIter( new TIterOnIter( faceIterVec ));
- // a seacher to check if a volume is close to a concave face
- std::auto_ptr< SMESH_ElementSearcher > faceSearcher
+ // search to check if a volume is close to a concave face
+ SMESHUtils::Deleter< SMESH_ElementSearcher > faceSearcher
( SMESH_MeshAlgos::GetElementSearcher( *theHelper.GetMeshDS(), faceIter ));
// classifier
gp_Pnt pMedium = SMESH_TNodeXYZ( linkIt->second );
double hMedium = faceNorm * gp_Vec( pOnFace0, pMedium ).XYZ();
double hVol = faceNorm * gp_Vec( pOnFace0, pInSolid ).XYZ();
- isDistorted = ( Abs( hMedium ) > Abs( hVol * 0.5 ));
+ if ( Abs( hMedium ) > Abs( hVol * 0.75 ))
+ {
+ SMESH_TNodeXYZ pI( nOnFace[i]), pJ( nOnFace[j]);
+ double angle = gp_Vec( pI, pMedium ).Angle( gp_Vec( pI, pJ ));
+ isDistorted = ( angle > M_PI / 20 );
+ }
}
}
}
MSG( "move OUT of solid " << nMedium );
}
}
- theError->myBadElements.push_back( vol );
+ static_cast<SMESH_BadInputElements*>( theError.get() )->add( vol );
}
} // loop on volumes sharing a node on FACE
} // loop on nodes on FACE
} // loop on FACEs of a SOLID
- if ( !theError->myBadElements.empty() )
+ if ( theError->HasBadElems() )
theError->myName = EDITERR_NO_MEDIUM_ON_GEOM;
} // 3D case
}
* \brief Move medium nodes of faces and volumes to fix distorted elements
* \param error - container of fixed distorted elements
* \param volumeOnly - to fix nodes on faces or not, if the shape is solid
- *
+ *
* Issue 0020307: EDF 992 SMESH : Linea/Quadratic with Medium Node on Geometry
*/
//=======================================================================
void SMESH_MesherHelper::FixQuadraticElements(SMESH_ComputeErrorPtr& compError,
bool volumeOnly)
{
+ //MESSAGE("FixQuadraticElements " << volumeOnly);
// setenv NO_FixQuadraticElements to know if FixQuadraticElements() is guilty of bad conversion
if ( getenv("NO_FixQuadraticElements") )
return;
}
// fix nodes on geom faces
#ifdef _DEBUG_
- int nbfaces = faces.Extent(); /*avoid "unused varianbles": */ nbfaces++, nbfaces--;
+ int nbfaces = nbSolids;
+ nbfaces = faces.Extent(); /*avoid "unused varianbles": */ nbfaces++, nbfaces--;
#endif
for ( TopTools_MapIteratorOfMapOfShape fIt( faces ); fIt.More(); fIt.Next() ) {
+ MESSAGE("FIX FACE " << nbfaces-- << " #" << GetMeshDS()->ShapeToIndex(fIt.Key()));
MSG("FIX FACE " << nbfaces-- << " #" << GetMeshDS()->ShapeToIndex(fIt.Key()));
SMESH_MesherHelper h(*myMesh);
h.SetSubShape( fIt.Key() );
MSG("Internal chain - ignore");
continue;
}
- // mesure chain length and compute link position along the chain
+ // measure chain length and compute link position along the chain
double chainLen = 0;
vector< double > linkPos;
TChain savedChain; // backup
gp_XY newUV = ApplyIn2D( s, oldUV, gp_XY( move.X(),move.Y()), gp_XY_Added );
gp_Pnt newPnt = s->Value( newUV.X(), newUV.Y());
move = gp_Vec( XYZ((*link1)->_mediumNode), newPnt.Transformed(loc) );
- if ( SMDS_FacePosition* nPos =
- dynamic_cast< SMDS_FacePosition* >((*link1)->_mediumNode->GetPosition()))
+ if ( SMDS_FacePositionPtr nPos = (*link1)->_mediumNode->GetPosition())
nPos->SetParameters( newUV.X(), newUV.Y() );
#ifdef _DEBUG_
if ( (XYZ((*link1)->node1()) - XYZ((*link1)->node2())).SquareModulus() <
"uv2: "<<uv2.X()<<", "<<uv2.Y()<<" \t" <<
"uvOld: "<<oldUV.X()<<", "<<oldUV.Y()<<" \t" <<
"newUV: "<<newUV.X()<<", "<<newUV.Y()<<" \t");
+ uv0.SetX( uv2.X() ); // avoid warning: variable set but not used
}
#endif
(*link1)->Move( move, /*sum=*/false, /*is2dFixed=*/true );
// 4. Move nodes
// -------------
- TIDSortedElemSet biQuadQuas, biQuadTris, triQuadHexa;
- const SMDS_MeshElement *biQuadQua, *triQuadHex;
+ TIDSortedElemSet biQuadQuas, biQuadTris, triQuadHexa, biQuadPenta;
const bool toFixCentralNodes = ( myMesh->NbBiQuadQuadrangles() +
myMesh->NbBiQuadTriangles() +
- myMesh->NbTriQuadraticHexas() );
+ myMesh->NbTriQuadraticHexas() +
+ myMesh->NbBiQuadPrisms());
double distXYZ[4];
faceHlp.ToFixNodeParameters( true );
// collect bi-quadratic elements
if ( toFixCentralNodes )
{
- biQuadQua = triQuadHex = 0;
SMDS_ElemIteratorPtr eIt = pLink->_mediumNode->GetInverseElementIterator();
while ( eIt->more() )
{
case SMDSEntity_BiQuad_Quadrangle: biQuadQuas.insert( e ); break;
case SMDSEntity_BiQuad_Triangle: biQuadTris.insert( e ); break;
case SMDSEntity_TriQuad_Hexa: triQuadHexa.insert( e ); break;
+ case SMDSEntity_BiQuad_Penta: biQuadPenta.insert( e ); break;
default:;
}
}
nCenterCoords.X(), nCenterCoords.Y(), nCenterCoords.Z());
}
}
+ // treat tri-quadratic hexahedra
+ {
+ SMDS_VolumeTool volExp;
+ TIDSortedElemSet::iterator pentIt = biQuadPenta.begin();
+ for ( ; pentIt != biQuadPenta.end(); ++pentIt )
+ {
+ MESSAGE("---");
+ volExp.Set( *pentIt, /*ignoreCentralNodes=*/false );
+ }
+ }
+#ifdef _DEBUG_
+ // avoid warning: defined but not used operator<<()
+ SMESH_Comment() << *links.begin() << *faces.begin();
+#endif
}
+
+//================================================================================
+/*!
+ * \brief DEBUG
+ */
+//================================================================================
+
+void SMESH_MesherHelper::WriteShape(const TopoDS_Shape& s)
+{
+ const char* name = "/tmp/shape.brep";
+ BRepTools::Write( s, name );
+#ifdef _DEBUG_
+ std::cout << name << std::endl;
+#endif
+}
+