-// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2010 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
+
// File: SMESH_MesherHelper.cxx
// Created: 15.02.06 15:22:41
// Author: Sergey KUUL
#include <limits>
+using namespace std;
+
#define RETURN_BAD_RESULT(msg) { MESSAGE(msg); return false; }
namespace {
gp_XYZ XYZ(const SMDS_MeshNode* n) { return gp_XYZ(n->X(), n->Y(), n->Z()); }
+ enum { U_periodic = 1, V_periodic = 2 };
}
//================================================================================
//================================================================================
SMESH_MesherHelper::SMESH_MesherHelper(SMESH_Mesh& theMesh)
- : myPar1(0), myPar2(0), myParIndex(0), myMesh(&theMesh), myShapeID(0), myCreateQuadratic(false)
+ : myParIndex(0), myMesh(&theMesh), myShapeID(0), myCreateQuadratic(false)
{
+ myPar1[0] = myPar2[0] = myPar1[1] = myPar2[1] = 0;
mySetElemOnShape = ( ! myMesh->HasShapeToMesh() );
}
+//=======================================================================
+//function : ~SMESH_MesherHelper
+//purpose :
+//=======================================================================
+
+SMESH_MesherHelper::~SMESH_MesherHelper()
+{
+ {
+ TID2ProjectorOnSurf::iterator i_proj = myFace2Projector.begin();
+ for ( ; i_proj != myFace2Projector.end(); ++i_proj )
+ delete i_proj->second;
+ }
+ {
+ TID2ProjectorOnCurve::iterator i_proj = myEdge2Projector.begin();
+ for ( ; i_proj != myEdge2Projector.end(); ++i_proj )
+ delete i_proj->second;
+ }
+}
+
//=======================================================================
//function : IsQuadraticSubMesh
//purpose : Check submesh for given shape: if all elements on this shape
}
SMESHDS_Mesh* meshDS = GetMeshDS();
myShapeID = meshDS->ShapeToIndex(aSh);
+ myParIndex = 0;
// treatment of periodic faces
for ( TopExp_Explorer eF( aSh, TopAbs_FACE ); eF.More(); eF.Next() )
const TopoDS_Edge& edge = TopoDS::Edge( exp.Current() );
if ( BRep_Tool::IsClosed( edge, face )) {
// initialize myPar1, myPar2 and myParIndex
- if ( mySeamShapeIds.empty() ) {
- gp_Pnt2d uv1, uv2;
- BRep_Tool::UVPoints( edge, face, uv1, uv2 );
- if ( Abs( uv1.Coord(1) - uv2.Coord(1) ) < Abs( uv1.Coord(2) - uv2.Coord(2) ))
- {
- myParIndex = 1; // U periodic
- myPar1 = surface.FirstUParameter();
- myPar2 = surface.LastUParameter();
- }
- else {
- myParIndex = 2; // V periodic
- myPar1 = surface.FirstVParameter();
- myPar2 = surface.LastVParameter();
- }
+ gp_Pnt2d uv1, uv2;
+ BRep_Tool::UVPoints( edge, face, uv1, uv2 );
+ if ( Abs( uv1.Coord(1) - uv2.Coord(1) ) < Abs( uv1.Coord(2) - uv2.Coord(2) ))
+ {
+ myParIndex |= U_periodic;
+ myPar1[0] = surface.FirstUParameter();
+ myPar2[0] = surface.LastUParameter();
+ }
+ else {
+ myParIndex |= V_periodic;
+ myPar1[1] = surface.FirstVParameter();
+ myPar2[1] = surface.LastVParameter();
}
// store seam shape indices, negative if shape encounters twice
int edgeID = meshDS->ShapeToIndex( edge );
TopoDS_Shape SMESH_MesherHelper::GetSubShapeByNode(const SMDS_MeshNode* node,
SMESHDS_Mesh* meshDS)
{
- int shapeID = node->GetPosition()->GetShapeId();
+ int shapeID = node->getshapeId();
if ( 0 < shapeID && shapeID <= meshDS->MaxShapeIndex() )
return meshDS->IndexToShape( shapeID );
else
myTLinkNodeMap.insert( make_pair(link,n12));
}
+//================================================================================
+/*!
+ * \brief Return true if position of nodes on the shape hasn't yet been checked or
+ * the positions proved to be invalid
+ */
+//================================================================================
+
+bool SMESH_MesherHelper::toCheckPosOnShape(int shapeID ) const
+{
+ map< int,bool >::const_iterator id_ok = myNodePosShapesValidity.find( shapeID );
+ return ( id_ok == myNodePosShapesValidity.end() || !id_ok->second );
+}
+
+//================================================================================
+/*!
+ * \brief Set validity of positions of nodes on the shape.
+ * Once set, validity is not changed
+ */
+//================================================================================
+
+void SMESH_MesherHelper::setPosOnShapeValidity(int shapeID, bool ok ) const
+{
+ ((SMESH_MesherHelper*)this)->myNodePosShapesValidity.insert( make_pair( shapeID, ok));
+}
+
//=======================================================================
//function : GetUVOnSeam
//purpose : Select UV on either of 2 pcurves of a seam edge, closest to the given UV
gp_Pnt2d SMESH_MesherHelper::GetUVOnSeam( const gp_Pnt2d& uv1, const gp_Pnt2d& uv2 ) const
{
- double p1 = uv1.Coord( myParIndex );
- double p2 = uv2.Coord( myParIndex );
- double p3 = ( Abs( p1 - myPar1 ) < Abs( p1 - myPar2 )) ? myPar2 : myPar1;
- if ( Abs( p2 - p1 ) > Abs( p2 - p3 ))
- p1 = p3;
gp_Pnt2d result = uv1;
- result.SetCoord( myParIndex, p1 );
+ for ( int i = U_periodic; i <= V_periodic ; ++i )
+ {
+ if ( myParIndex & i )
+ {
+ double p1 = uv1.Coord( i );
+ double dp1 = Abs( p1-myPar1[i-1]), dp2 = Abs( p1-myPar2[i-1]);
+ if ( myParIndex == i ||
+ dp1 < ( myPar2[i-1] - myPar2[i-1] ) / 100. ||
+ dp2 < ( myPar2[i-1] - myPar2[i-1] ) / 100. )
+ {
+ double p2 = uv2.Coord( i );
+ double p1Alt = ( dp1 < dp2 ) ? myPar2[i-1] : myPar1[i-1];
+ if ( Abs( p2 - p1 ) > Abs( p2 - p1Alt ))
+ result.SetCoord( i, p1Alt );
+ }
+ }
+ }
return result;
}
const SMDS_MeshNode* n2,
bool* check) const
{
- gp_Pnt2d uv( 1e100, 1e100 );
+ gp_Pnt2d uv( Precision::Infinite(), Precision::Infinite() );
const SMDS_PositionPtr Pos = n->GetPosition();
bool uvOK = false;
if(Pos->GetTypeOfPosition()==SMDS_TOP_FACE)
{
// node has position on face
const SMDS_FacePosition* fpos =
- static_cast<const SMDS_FacePosition*>(n->GetPosition().get());
+ static_cast<const SMDS_FacePosition*>(n->GetPosition());
uv.SetCoord(fpos->GetUParameter(),fpos->GetVParameter());
if ( check )
- uvOK = CheckNodeUV( F, n, uv.ChangeCoord(), BRep_Tool::Tolerance( F ));
+ uvOK = CheckNodeUV( F, n, uv.ChangeCoord(), 10*MaxTolerance( F ));
}
else if(Pos->GetTypeOfPosition()==SMDS_TOP_EDGE)
{
// corresponding edge from face, get pcurve for this
// edge and retrieve value from this pcurve
const SMDS_EdgePosition* epos =
- static_cast<const SMDS_EdgePosition*>(n->GetPosition().get());
- int edgeID = Pos->GetShapeId();
+ static_cast<const SMDS_EdgePosition*>(n->GetPosition());
+ int edgeID = n->getshapeId();
TopoDS_Edge E = TopoDS::Edge(GetMeshDS()->IndexToShape(edgeID));
double f, l, u = epos->GetUParameter();
Handle(Geom2d_Curve) C2d = BRep_Tool::CurveOnSurface(E, F, f, l);
else
uv.SetCoord(0.,0.);
if ( check || !validU )
- uvOK = CheckNodeUV( F, n, uv.ChangeCoord(), BRep_Tool::Tolerance( E ),/*force=*/ !validU );
+ uvOK = CheckNodeUV( F, n, uv.ChangeCoord(), 10*MaxTolerance( F ),/*force=*/ !validU );
// for a node on a seam edge select one of UVs on 2 pcurves
if ( n2 && IsSeamShape( edgeID ) )
{
- uv = GetUVOnSeam( uv, GetNodeUV( F, n2, 0 ));
+ uv = GetUVOnSeam( uv, GetNodeUV( F, n2, 0, check ));
}
else
{ // adjust uv to period
}
else if(Pos->GetTypeOfPosition()==SMDS_TOP_VERTEX)
{
- if ( int vertexID = n->GetPosition()->GetShapeId() ) {
+ if ( int vertexID = n->getshapeId() ) {
const TopoDS_Vertex& V = TopoDS::Vertex(GetMeshDS()->IndexToShape(vertexID));
try {
uv = BRep_Tool::Parameters( V, F );
}
}
else {
+ uvOK = false;
TopTools_ListIteratorOfListOfShape it( myMesh->GetAncestors( V ));
for ( ; it.More(); it.Next() ) {
if ( it.Value().ShapeType() == TopAbs_EDGE ) {
if ( !C2d.IsNull() ) {
double u = ( V == TopExp::FirstVertex( edge ) ) ? f : l;
uv = C2d->Value( u );
+ uvOK = true;
break;
}
}
const double tol,
const bool force) const
{
- if ( force || !myOkNodePosShapes.count( n->GetPosition()->GetShapeId() ))
+ int shapeID = n->getshapeId();
+ if ( force || toCheckPosOnShape( shapeID ))
{
+ double toldis = tol;
+ double tolmin = 1.e-7*myMesh->GetMeshDS()->getMaxDim(); // nodes coordinates are stored in float format
+ if (toldis < tolmin) toldis = tolmin;
// check that uv is correct
TopLoc_Location loc;
Handle(Geom_Surface) surface = BRep_Tool::Surface( F,loc );
gp_Pnt nodePnt = XYZ( n );
if ( !loc.IsIdentity() ) nodePnt.Transform( loc.Transformation().Inverted() );
- if ( nodePnt.Distance( surface->Value( uv.X(), uv.Y() )) > tol )
+ if ( Precision::IsInfinite( uv.X() ) ||
+ Precision::IsInfinite( uv.Y() ) ||
+ nodePnt.Distance( surface->Value( uv.X(), uv.Y() )) > toldis )
{
+ setPosOnShapeValidity( shapeID, false );
// uv incorrect, project the node to surface
- GeomAPI_ProjectPointOnSurf projector( nodePnt, surface, tol );
+ GeomAPI_ProjectPointOnSurf& projector = GetProjector( F, loc, tol );
+ projector.Perform( nodePnt );
if ( !projector.IsDone() || projector.NbPoints() < 1 )
{
MESSAGE( "SMESH_MesherHelper::CheckNodeUV() failed to project" );
}
Quantity_Parameter U,V;
projector.LowerDistanceParameters(U,V);
- if ( nodePnt.Distance( surface->Value( U, V )) > tol )
+ uv.SetCoord( U,V );
+ if ( nodePnt.Distance( surface->Value( U, V )) > toldis )
{
MESSAGE( "SMESH_MesherHelper::CheckNodeUV(), invalid projection" );
return false;
}
- uv.SetCoord( U,V );
+ // store the fixed UV on the face
+ if ( myShape.IsSame(F) && shapeID == myShapeID )
+ const_cast<SMDS_MeshNode*>(n)->SetPosition
+ ( SMDS_PositionPtr( new SMDS_FacePosition( U, V )));
}
else if ( uv.Modulus() > numeric_limits<double>::min() )
{
- ((SMESH_MesherHelper*) this)->myOkNodePosShapes.insert( n->GetPosition()->GetShapeId() );
+ setPosOnShapeValidity( shapeID, true );
}
}
return true;
}
+//=======================================================================
+//function : GetProjector
+//purpose : Return projector intitialized by given face without location, which is returned
+//=======================================================================
+
+GeomAPI_ProjectPointOnSurf& SMESH_MesherHelper::GetProjector(const TopoDS_Face& F,
+ TopLoc_Location& loc,
+ double tol ) const
+{
+ Handle(Geom_Surface) surface = BRep_Tool::Surface( F,loc );
+ int faceID = GetMeshDS()->ShapeToIndex( F );
+ TID2ProjectorOnSurf& i2proj = const_cast< TID2ProjectorOnSurf&>( myFace2Projector );
+ TID2ProjectorOnSurf::iterator i_proj = i2proj.find( faceID );
+ if ( i_proj == i2proj.end() )
+ {
+ if ( tol == 0 ) tol = BRep_Tool::Tolerance( F );
+ double U1, U2, V1, V2;
+ surface->Bounds(U1, U2, V1, V2);
+ GeomAPI_ProjectPointOnSurf* proj = new GeomAPI_ProjectPointOnSurf();
+ proj->Init( surface, U1, U2, V1, V2, tol );
+ i_proj = i2proj.insert( make_pair( faceID, proj )).first;
+ }
+ return *( i_proj->second );
+}
+
+namespace
+{
+ gp_XY AverageUV(const gp_XY& uv1, const gp_XY& uv2) { return ( uv1 + uv2 ) / 2.; }
+ gp_XY_FunPtr(Added); // define gp_XY_Added pointer to function calling gp_XY::Added(gp_XY)
+ gp_XY_FunPtr(Subtracted);
+}
+
+//=======================================================================
+//function : applyIn2D
+//purpose : Perform given operation on two 2d points in parameric space of given surface.
+// It takes into account period of the surface. Use gp_XY_FunPtr macro
+// to easily define pointer to function of gp_XY class.
+//=======================================================================
+
+gp_XY SMESH_MesherHelper::applyIn2D(const Handle(Geom_Surface)& surface,
+ const gp_XY& uv1,
+ const gp_XY& uv2,
+ xyFunPtr fun,
+ const bool resultInPeriod)
+{
+ Standard_Boolean isUPeriodic = surface.IsNull() ? false : surface->IsUPeriodic();
+ Standard_Boolean isVPeriodic = surface.IsNull() ? false : surface->IsVPeriodic();
+ if ( !isUPeriodic && !isVPeriodic )
+ return fun(uv1,uv2);
+
+ // move uv2 not far than half-period from uv1
+ double u2 =
+ uv2.X()+(isUPeriodic ? ShapeAnalysis::AdjustByPeriod(uv2.X(),uv1.X(),surface->UPeriod()) :0);
+ double v2 =
+ uv2.Y()+(isVPeriodic ? ShapeAnalysis::AdjustByPeriod(uv2.Y(),uv1.Y(),surface->VPeriod()) :0);
+
+ // execute operation
+ gp_XY res = fun( uv1, gp_XY(u2,v2) );
+
+ // move result within period
+ if ( resultInPeriod )
+ {
+ Standard_Real UF,UL,VF,VL;
+ surface->Bounds(UF,UL,VF,VL);
+ if ( isUPeriodic )
+ res.SetX( res.X() + ShapeAnalysis::AdjustToPeriod(res.X(),UF,UL));
+ if ( isVPeriodic )
+ res.SetY( res.Y() + ShapeAnalysis::AdjustToPeriod(res.Y(),VF,VL));
+ }
+
+ return res;
+}
//=======================================================================
//function : GetMiddleUV
//purpose : Return middle UV taking in account surface period
const gp_XY& p1,
const gp_XY& p2)
{
- if ( surface.IsNull() )
- return 0.5 * ( p1 + p2 );
- //checking if surface is periodic
- Standard_Real UF,UL,VF,VL;
- surface->Bounds(UF,UL,VF,VL);
-
- Standard_Real u,v;
- Standard_Boolean isUPeriodic = surface->IsUPeriodic();
- if(isUPeriodic) {
- Standard_Real UPeriod = surface->UPeriod();
- Standard_Real p2x = p2.X()+ShapeAnalysis::AdjustByPeriod(p2.X(),p1.X(),UPeriod);
- Standard_Real pmid = (p1.X()+p2x)/2.;
- u = pmid+ShapeAnalysis::AdjustToPeriod(pmid,UF,UL);
- }
- else {
- u= (p1.X()+p2.X())/2.;
- }
- Standard_Boolean isVPeriodic = surface->IsVPeriodic();
- if(isVPeriodic) {
- Standard_Real VPeriod = surface->VPeriod();
- Standard_Real p2y = p2.Y()+ShapeAnalysis::AdjustByPeriod(p2.Y(),p1.Y(),VPeriod);
- Standard_Real pmid = (p1.Y()+p2y)/2.;
- v = pmid+ShapeAnalysis::AdjustToPeriod(pmid,VF,VL);
- }
- else {
- v = (p1.Y()+p2.Y())/2.;
- }
- return gp_XY( u,v );
+ return applyIn2D( surface, p1, p2, & AverageUV );
}
//=======================================================================
double SMESH_MesherHelper::GetNodeU(const TopoDS_Edge& E,
const SMDS_MeshNode* n,
+ const SMDS_MeshNode* inEdgeNode,
bool* check)
{
double param = 0;
- const SMDS_PositionPtr Pos = n->GetPosition();
- if(Pos->GetTypeOfPosition()==SMDS_TOP_EDGE) {
- const SMDS_EdgePosition* epos =
- static_cast<const SMDS_EdgePosition*>(n->GetPosition().get());
+ const SMDS_PositionPtr pos = n->GetPosition();
+ if ( pos->GetTypeOfPosition()==SMDS_TOP_EDGE )
+ {
+ const SMDS_EdgePosition* epos = static_cast<const SMDS_EdgePosition*>( pos );
param = epos->GetUParameter();
}
- else if(Pos->GetTypeOfPosition()==SMDS_TOP_VERTEX) {
- SMESHDS_Mesh * meshDS = GetMeshDS();
- int vertexID = n->GetPosition()->GetShapeId();
- const TopoDS_Vertex& V = TopoDS::Vertex(meshDS->IndexToShape(vertexID));
- param = BRep_Tool::Parameter( V, E );
+ else if( pos->GetTypeOfPosition() == SMDS_TOP_VERTEX )
+ {
+ if ( inEdgeNode && TopExp::FirstVertex( E ).IsSame( TopExp::LastVertex( E ))) // issue 0020128
+ {
+ Standard_Real f,l;
+ BRep_Tool::Range( E, f,l );
+ double uInEdge = GetNodeU( E, inEdgeNode );
+ param = ( fabs( uInEdge - f ) < fabs( l - uInEdge )) ? f : l;
+ }
+ else
+ {
+ SMESHDS_Mesh * meshDS = GetMeshDS();
+ int vertexID = n->getshapeId();
+ const TopoDS_Vertex& V = TopoDS::Vertex(meshDS->IndexToShape(vertexID));
+ param = BRep_Tool::Parameter( V, E );
+ }
}
if ( check )
- *check = CheckNodeU( E, n, param, BRep_Tool::Tolerance( E ));
+ {
+ double tol = BRep_Tool::Tolerance( E );
+ double f,l; BRep_Tool::Range( E, f,l );
+ bool force = ( param < f-tol || param > l+tol );
+ if ( !force && pos->GetTypeOfPosition()==SMDS_TOP_EDGE )
+ force = ( GetMeshDS()->ShapeToIndex( E ) != n->getshapeId() );
+
+ *check = CheckNodeU( E, n, param, 2*tol, force );
+ }
return param;
}
const SMDS_MeshNode* n,
double& u,
const double tol,
- const bool force) const
+ const bool force,
+ double* distance) const
{
- if ( force || !myOkNodePosShapes.count( n->GetPosition()->GetShapeId() ))
+ int shapeID = n->getshapeId();
+ if ( force || toCheckPosOnShape( shapeID ))
{
+ double toldis = tol;
+ double tolmin = 1.e-7*myMesh->GetMeshDS()->getMaxDim(); // nodes coordinates are stored in float format
+ if (toldis < tolmin) toldis = tolmin;
// check that u is correct
TopLoc_Location loc; double f,l;
Handle(Geom_Curve) curve = BRep_Tool::Curve( E,loc,f,l );
{
gp_Pnt nodePnt = SMESH_MeshEditor::TNodeXYZ( n );
if ( !loc.IsIdentity() ) nodePnt.Transform( loc.Transformation().Inverted() );
- if ( nodePnt.Distance( curve->Value( u )) > tol )
+ double dist = nodePnt.Distance( curve->Value( u ));
+ if ( distance ) *distance = dist;
+ if ( dist > toldis )
{
+ setPosOnShapeValidity( shapeID, false );
// u incorrect, project the node to the curve
- GeomAPI_ProjectPointOnCurve projector( nodePnt, curve, f, l );
- if ( projector.NbPoints() < 1 )
+ int edgeID = GetMeshDS()->ShapeToIndex( E );
+ TID2ProjectorOnCurve& i2proj = const_cast< TID2ProjectorOnCurve&>( myEdge2Projector );
+ TID2ProjectorOnCurve::iterator i_proj =
+ i2proj.insert( make_pair( edgeID, (GeomAPI_ProjectPointOnCurve*) 0 )).first;
+ if ( !i_proj->second )
+ {
+ i_proj->second = new GeomAPI_ProjectPointOnCurve();
+ i_proj->second->Init( curve, f, l );
+ }
+ GeomAPI_ProjectPointOnCurve* projector = i_proj->second;
+ projector->Perform( nodePnt );
+ if ( projector->NbPoints() < 1 )
{
MESSAGE( "SMESH_MesherHelper::CheckNodeU() failed to project" );
return false;
}
- Quantity_Parameter U = projector.LowerDistanceParameter();
- if ( nodePnt.Distance( curve->Value( U )) > tol )
+ Quantity_Parameter U = projector->LowerDistanceParameter();
+ u = double( U );
+ dist = nodePnt.Distance( curve->Value( U ));
+ if ( distance ) *distance = dist;
+ if ( dist > toldis )
{
MESSAGE( "SMESH_MesherHelper::CheckNodeU(), invalid projection" );
+ MESSAGE("distance " << nodePnt.Distance(curve->Value( U )) << " " << toldis);
return false;
}
- u = double( U );
+ // store the fixed U on the edge
+ if ( myShape.IsSame(E) && shapeID == myShapeID )
+ const_cast<SMDS_MeshNode*>(n)->SetPosition
+ ( SMDS_PositionPtr( new SMDS_EdgePosition( U )));
}
else if ( fabs( u ) > numeric_limits<double>::min() )
{
- ((SMESH_MesherHelper*) this)->myOkNodePosShapes.insert( n->GetPosition()->GetShapeId() );
+ setPosOnShapeValidity( shapeID, true );
+ }
+ if (( u < f-tol || u > l+tol ) && force )
+ {
+ // node is on vertex but is set on periodic but trimmed edge (issue 0020890)
+ try
+ {
+ // do not use IsPeriodic() as Geom_TrimmedCurve::IsPeriodic () returns false
+ double period = curve->Period();
+ u = ( u < f ) ? u + period : u - period;
+ }
+ catch (Standard_Failure& exc)
+ {
+ return false;
+ }
}
}
}
SMDS_MeshNode* n12;
SMESHDS_Mesh* meshDS = GetMeshDS();
+ if ( IsSeamShape( n1->getshapeId() ))
+ // to get a correct UV of a node on seam, the second node must have checked UV
+ std::swap( n1, n2 );
+
// get type of shape for the new medium node
int faceID = -1, edgeID = -1;
const SMDS_PositionPtr Pos1 = n1->GetPosition();
const SMDS_PositionPtr Pos2 = n2->GetPosition();
+ TopoDS_Edge E; double u [2];
+ TopoDS_Face F; gp_XY uv[2];
+ bool uvOK[2] = { false, false };
+
if( myShape.IsNull() )
{
if( Pos1->GetTypeOfPosition()==SMDS_TOP_FACE ) {
- faceID = Pos1->GetShapeId();
+ faceID = n1->getshapeId();
}
else if( Pos2->GetTypeOfPosition()==SMDS_TOP_FACE ) {
- faceID = Pos2->GetShapeId();
+ faceID = n2->getshapeId();
}
if( Pos1->GetTypeOfPosition()==SMDS_TOP_EDGE ) {
- edgeID = Pos1->GetShapeId();
+ edgeID = n1->getshapeId();
}
if( Pos2->GetTypeOfPosition()==SMDS_TOP_EDGE ) {
- edgeID = Pos2->GetShapeId();
+ edgeID = n2->getshapeId();
}
}
// get positions of the given nodes on shapes
- TopoDS_Edge E; double u [2];
- TopoDS_Face F; gp_XY uv[2];
- bool uvOK[2] = { false, false };
TopAbs_ShapeEnum shapeType = myShape.IsNull() ? TopAbs_SHAPE : myShape.ShapeType();
if ( faceID>0 || shapeType == TopAbs_FACE)
{
}
else if (edgeID>0 || shapeType == TopAbs_EDGE)
{
+ if ( Pos1->GetTypeOfPosition()==SMDS_TOP_EDGE &&
+ Pos2->GetTypeOfPosition()==SMDS_TOP_EDGE &&
+ n1->getshapeId() != n2->getshapeId() ) // issue 0021006
+ return getMediumNodeOnComposedWire(n1,n2,force3d);
+
if( myShape.IsNull() )
E = TopoDS::Edge(meshDS->IndexToShape(edgeID));
else {
E = TopoDS::Edge(myShape);
edgeID = myShapeID;
}
- u[0] = GetNodeU(E,n1, force3d ? 0 : &uvOK[0]);
- u[1] = GetNodeU(E,n2, force3d ? 0 : &uvOK[1]);
+ u[0] = GetNodeU(E,n1,n2, force3d ? 0 : &uvOK[0]);
+ u[1] = GetNodeU(E,n2,n1, force3d ? 0 : &uvOK[1]);
}
if(!force3d)
{
{
if ( uvOK[0] && uvOK[1] )
{
- if ( IsDegenShape( Pos1->GetShapeId() ))
- uv[0].SetCoord( myParIndex, uv[1].Coord( myParIndex ));
- else if ( IsDegenShape( Pos2->GetShapeId() ))
- uv[1].SetCoord( myParIndex, uv[0].Coord( myParIndex ));
+ if ( IsDegenShape( n1->getshapeId() )) {
+ if ( myParIndex & U_periodic ) uv[0].SetCoord( 1, uv[1].Coord( 1 ));
+ else uv[0].SetCoord( 2, uv[1].Coord( 2 ));
+ }
+ else if ( IsDegenShape( n2->getshapeId() )) {
+ if ( myParIndex & U_periodic ) uv[1].SetCoord( 1, uv[0].Coord( 1 ));
+ else uv[1].SetCoord( 2, uv[0].Coord( 2 ));
+ }
TopLoc_Location loc;
Handle(Geom_Surface) S = BRep_Tool::Surface(F,loc);
}
}
}
+
// 3d variant
double x = ( n1->X() + n2->X() )/2.;
double y = ( n1->Y() + n2->Y() )/2.;
double z = ( n1->Z() + n2->Z() )/2.;
n12 = meshDS->AddNode(x,y,z);
+
if ( !F.IsNull() )
{
gp_XY UV = ( uv[0] + uv[1] ) / 2.;
- CheckNodeUV( F, n12, UV, BRep_Tool::Tolerance( F ), /*force=*/true);
+ CheckNodeUV( F, n12, UV, 2*BRep_Tool::Tolerance( F ), /*force=*/true);
meshDS->SetNodeOnFace(n12, faceID, UV.X(), UV.Y() );
}
else if ( !E.IsNull() )
{
double U = ( u[0] + u[1] ) / 2.;
- CheckNodeU( E, n12, U, BRep_Tool::Tolerance( E ), /*force=*/true);
+ CheckNodeU( E, n12, U, 2*BRep_Tool::Tolerance( E ), /*force=*/true);
meshDS->SetNodeOnEdge(n12, edgeID, U);
}
- else
+ else if ( myShapeID > 0 )
{
meshDS->SetNodeInVolume(n12, myShapeID);
}
+
myTLinkNodeMap.insert( make_pair( link, n12 ));
return n12;
}
+//================================================================================
+/*!
+ * \brief Makes a medium node if nodes reside different edges
+ */
+//================================================================================
+
+const SMDS_MeshNode* SMESH_MesherHelper::getMediumNodeOnComposedWire(const SMDS_MeshNode* n1,
+ const SMDS_MeshNode* n2,
+ bool force3d)
+{
+ gp_Pnt middle = 0.5 * XYZ(n1) + 0.5 * XYZ(n2);
+ SMDS_MeshNode* n12 = AddNode( middle.X(), middle.Y(), middle.Z() );
+
+ // To find position on edge and 3D position for n12,
+ // project <middle> to 2 edges and select projection most close to <middle>
+
+ double u = 0, distMiddleProj = Precision::Infinite();
+ int iOkEdge = 0;
+ TopoDS_Edge edges[2];
+ for ( int is2nd = 0; is2nd < 2; ++is2nd )
+ {
+ // get an edge
+ const SMDS_MeshNode* n = is2nd ? n2 : n1;
+ TopoDS_Shape shape = GetSubShapeByNode( n, GetMeshDS() );
+ if ( shape.IsNull() || shape.ShapeType() != TopAbs_EDGE )
+ continue;
+
+ // project to get U of projection and distance from middle to projection
+ TopoDS_Edge edge = edges[ is2nd ] = TopoDS::Edge( shape );
+ double node2MiddleDist = middle.Distance( XYZ(n) );
+ double foundU = GetNodeU( edge, n ), foundDist = node2MiddleDist;
+ CheckNodeU( edge, n12, foundU, 2*BRep_Tool::Tolerance(edge), /*force=*/true, &foundDist );
+ if ( foundDist < node2MiddleDist )
+ {
+ distMiddleProj = foundDist;
+ u = foundU;
+ iOkEdge = is2nd;
+ }
+ }
+ if ( Precision::IsInfinite( distMiddleProj ))
+ {
+ // both projections failed; set n12 on the edge of n1 with U of a common vertex
+ TopoDS_Vertex vCommon;
+ if ( TopExp::CommonVertex( edges[0], edges[1], vCommon ))
+ u = BRep_Tool::Parameter( vCommon, edges[0] );
+ else
+ {
+ double f,l, u0 = GetNodeU( edges[0], n1 );
+ BRep_Tool::Range( edges[0],f,l );
+ u = ( fabs(u0-f) < fabs(u0-l) ) ? f : l;
+ }
+ iOkEdge = 0;
+ distMiddleProj = 0;
+ }
+
+ // move n12 to position of a successfull projection
+ double tol = BRep_Tool::Tolerance(edges[ iOkEdge ]);
+ if ( !force3d && distMiddleProj > 2*tol )
+ {
+ TopLoc_Location loc; double f,l;
+ Handle(Geom_Curve) curve = BRep_Tool::Curve( edges[iOkEdge],loc,f,l );
+ gp_Pnt p = curve->Value( u );
+ GetMeshDS()->MoveNode( n12, p.X(), p.Y(), p.Z() );
+ }
+
+ GetMeshDS()->SetNodeOnEdge(n12, edges[iOkEdge], u);
+
+ myTLinkNodeMap.insert( make_pair( SMESH_TLink(n1,n2), n12 ));
+
+ return n12;
+}
+
//=======================================================================
//function : AddNode
//purpose : Creates a node
return elem;
}
+//=======================================================================
+//function : AddPolygonalFace
+//purpose : Creates polygon, with additional nodes in quadratic mesh
+//=======================================================================
+
+SMDS_MeshFace* SMESH_MesherHelper::AddPolygonalFace (const vector<const SMDS_MeshNode*>& nodes,
+ const int id,
+ const bool force3d)
+{
+ SMESHDS_Mesh * meshDS = GetMeshDS();
+ SMDS_MeshFace* elem = 0;
+
+ if(!myCreateQuadratic) {
+ if(id)
+ elem = meshDS->AddPolygonalFaceWithID(nodes, id);
+ else
+ elem = meshDS->AddPolygonalFace(nodes);
+ }
+ else {
+ vector<const SMDS_MeshNode*> newNodes;
+ for ( int i = 0; i < nodes.size(); ++i )
+ {
+ const SMDS_MeshNode* n1 = nodes[i];
+ const SMDS_MeshNode* n2 = nodes[(i+1)/nodes.size()];
+ const SMDS_MeshNode* n12 = GetMediumNode(n1,n2,force3d);
+ newNodes.push_back( n1 );
+ newNodes.push_back( n12 );
+ }
+ if(id)
+ elem = meshDS->AddPolygonalFaceWithID(newNodes, id);
+ else
+ elem = meshDS->AddPolygonalFace(newNodes);
+ }
+ if ( mySetElemOnShape && myShapeID > 0 )
+ meshDS->SetMeshElementOnShape( elem, myShapeID );
+
+ return elem;
+}
+
//=======================================================================
//function : AddVolume
//purpose : Creates quadratic or linear prism
return elem;
}
+//=======================================================================
+//function : AddPolyhedralVolume
+//purpose : Creates polyhedron. In quadratic mesh, adds medium nodes
+//=======================================================================
+
+SMDS_MeshVolume*
+SMESH_MesherHelper::AddPolyhedralVolume (const std::vector<const SMDS_MeshNode*>& nodes,
+ const std::vector<int>& quantities,
+ const int id,
+ const bool force3d)
+{
+ SMESHDS_Mesh * meshDS = GetMeshDS();
+ SMDS_MeshVolume* elem = 0;
+ if(!myCreateQuadratic)
+ {
+ if(id)
+ elem = meshDS->AddPolyhedralVolumeWithID(nodes, quantities, id);
+ else
+ elem = meshDS->AddPolyhedralVolume(nodes, quantities);
+ }
+ else
+ {
+ vector<const SMDS_MeshNode*> newNodes;
+ vector<int> newQuantities;
+ for ( int iFace=0, iN=0; iFace < quantities.size(); ++iFace)
+ {
+ int nbNodesInFace = quantities[iFace];
+ newQuantities.push_back(0);
+ for ( int i = 0; i < nbNodesInFace; ++i )
+ {
+ const SMDS_MeshNode* n1 = nodes[ iN + i ];
+ newNodes.push_back( n1 );
+ newQuantities.back()++;
+
+ const SMDS_MeshNode* n2 = nodes[ iN + ( i+1==nbNodesInFace ? 0 : i+1 )];
+// if ( n1->GetPosition()->GetTypeOfPosition() != SMDS_TOP_3DSPACE &&
+// n2->GetPosition()->GetTypeOfPosition() != SMDS_TOP_3DSPACE )
+ {
+ const SMDS_MeshNode* n12 = GetMediumNode(n1,n2,force3d);
+ newNodes.push_back( n12 );
+ newQuantities.back()++;
+ }
+ }
+ iN += nbNodesInFace;
+ }
+ if(id)
+ elem = meshDS->AddPolyhedralVolumeWithID( newNodes, newQuantities, id );
+ else
+ elem = meshDS->AddPolyhedralVolume( newNodes, newQuantities );
+ }
+ if ( mySetElemOnShape && myShapeID > 0 )
+ meshDS->SetMeshElementOnShape( elem, myShapeID );
+
+ return elem;
+}
+
//=======================================================================
//function : LoadNodeColumns
//purpose : Load nodes bound to face into a map of node columns
const TopoDS_Edge& theBaseEdge,
SMESHDS_Mesh* theMesh)
{
- // get vertices of theBaseEdge
- TopoDS_Vertex vfb, vlb, vft; // first and last, bottom and top vertices
- TopoDS_Edge eFrw = TopoDS::Edge( theBaseEdge.Oriented( TopAbs_FORWARD ));
- TopExp::Vertices( eFrw, vfb, vlb );
-
- // find the other edges of theFace and orientation of e1
- TopoDS_Edge e1, e2, eTop;
- bool rev1, CumOri = false;
- TopExp_Explorer exp( theFace, TopAbs_EDGE );
- int nbEdges = 0;
- for ( ; exp.More(); exp.Next() ) {
- if ( ++nbEdges > 4 ) {
- return false; // more than 4 edges in theFace
- }
- TopoDS_Edge e = TopoDS::Edge( exp.Current() );
- if ( theBaseEdge.IsSame( e ))
- continue;
- TopoDS_Vertex vCommon;
- if ( !TopExp::CommonVertex( theBaseEdge, e, vCommon ))
- eTop = e;
- else if ( vCommon.IsSame( vfb )) {
- e1 = e;
- vft = TopExp::LastVertex( e1, CumOri );
- rev1 = vfb.IsSame( vft );
- if ( rev1 )
- vft = TopExp::FirstVertex( e1, CumOri );
- }
- else
- e2 = e;
- }
- if ( nbEdges < 4 ) {
- return false; // less than 4 edges in theFace
- }
- if ( e2.IsNull() && vfb.IsSame( vlb ))
- e2 = e1;
-
- // submeshes corresponding to shapes
- SMESHDS_SubMesh* smFace = theMesh->MeshElements( theFace );
- SMESHDS_SubMesh* smb = theMesh->MeshElements( theBaseEdge );
- SMESHDS_SubMesh* smt = theMesh->MeshElements( eTop );
- SMESHDS_SubMesh* sm1 = theMesh->MeshElements( e1 );
- SMESHDS_SubMesh* sm2 = theMesh->MeshElements( e2 );
- SMESHDS_SubMesh* smVfb = theMesh->MeshElements( vfb );
- SMESHDS_SubMesh* smVlb = theMesh->MeshElements( vlb );
- SMESHDS_SubMesh* smVft = theMesh->MeshElements( vft );
- if (!smFace || !smb || !smt || !sm1 || !sm2 || !smVfb || !smVlb || !smVft ) {
- RETURN_BAD_RESULT( "NULL submesh " <<smFace<<" "<<smb<<" "<<smt<<" "<<
- sm1<<" "<<sm2<<" "<<smVfb<<" "<<smVlb<<" "<<smVft);
- }
- if ( smb->NbNodes() != smt->NbNodes() || sm1->NbNodes() != sm2->NbNodes() ) {
- RETURN_BAD_RESULT(" Diff nb of nodes on opposite edges" );
- }
- if (smVfb->NbNodes() != 1 || smVlb->NbNodes() != 1 || smVft->NbNodes() != 1) {
- RETURN_BAD_RESULT("Empty submesh of vertex");
- }
- // define whether mesh is quadratic
- bool isQuadraticMesh = false;
- SMDS_ElemIteratorPtr eIt = smFace->GetElements();
- if ( !eIt->more() ) {
- RETURN_BAD_RESULT("No elements on the face");
- }
- const SMDS_MeshElement* e = eIt->next();
- isQuadraticMesh = e->IsQuadratic();
-
- if ( sm1->NbNodes() * smb->NbNodes() != smFace->NbNodes() ) {
- // check quadratic case
- if ( isQuadraticMesh ) {
- // what if there are quadrangles and triangles mixed?
-// int n1 = sm1->NbNodes()/2;
-// int n2 = smb->NbNodes()/2;
-// int n3 = sm1->NbNodes() - n1;
-// int n4 = smb->NbNodes() - n2;
-// int nf = sm1->NbNodes()*smb->NbNodes() - n3*n4;
-// if( nf != smFace->NbNodes() ) {
-// MESSAGE( "Wrong nb face nodes: " <<
-// sm1->NbNodes()<<" "<<smb->NbNodes()<<" "<<smFace->NbNodes());
-// return false;
-// }
- }
- else {
- RETURN_BAD_RESULT( "Wrong nb face nodes: " <<
- sm1->NbNodes()<<" "<<smb->NbNodes()<<" "<<smFace->NbNodes());
- }
- }
- // IJ size
- int vsize = sm1->NbNodes() + 2;
- int hsize = smb->NbNodes() + 2;
- if(isQuadraticMesh) {
- vsize = vsize - sm1->NbNodes()/2 -1;
- hsize = hsize - smb->NbNodes()/2 -1;
- }
-
- // load nodes from theBaseEdge
-
- std::set<const SMDS_MeshNode*> loadedNodes;
- const SMDS_MeshNode* nullNode = 0;
+ SMESHDS_SubMesh* faceSubMesh = theMesh->MeshElements( theFace );
+ if ( !faceSubMesh || faceSubMesh->NbElements() == 0 )
+ return false;
- std::vector<const SMDS_MeshNode*> & nVecf = theParam2ColumnMap[ 0.];
- nVecf.resize( vsize, nullNode );
- loadedNodes.insert( nVecf[ 0 ] = smVfb->GetNodes()->next() );
+ // get nodes on theBaseEdge sorted by param on edge and initialize theParam2ColumnMap with them
- std::vector<const SMDS_MeshNode*> & nVecl = theParam2ColumnMap[ 1.];
- nVecl.resize( vsize, nullNode );
- loadedNodes.insert( nVecl[ 0 ] = smVlb->GetNodes()->next() );
+ map< double, const SMDS_MeshNode*> sortedBaseNodes;
+ if ( !SMESH_Algo::GetSortedNodesOnEdge( theMesh, theBaseEdge,/*noMedium=*/true, sortedBaseNodes)
+ || sortedBaseNodes.size() < 2 )
+ return false;
- double f, l;
- BRep_Tool::Range( eFrw, f, l );
- double range = l - f;
- SMDS_NodeIteratorPtr nIt = smb->GetNodes();
- const SMDS_MeshNode* node;
- while ( nIt->more() ) {
- node = nIt->next();
- if(IsMedium(node, SMDSAbs_Edge))
- continue;
- const SMDS_EdgePosition* pos =
- dynamic_cast<const SMDS_EdgePosition*>( node->GetPosition().get() );
- if ( !pos ) {
- return false;
- }
- double u = ( pos->GetUParameter() - f ) / range;
- std::vector<const SMDS_MeshNode*> & nVec = theParam2ColumnMap[ u ];
- nVec.resize( vsize, nullNode );
- loadedNodes.insert( nVec[ 0 ] = node );
- }
- if ( theParam2ColumnMap.size() != hsize ) {
- RETURN_BAD_RESULT( "Wrong node positions on theBaseEdge" );
+ int nbRows = faceSubMesh->NbElements() / ( sortedBaseNodes.size()-1 ) + 1;
+ map< double, const SMDS_MeshNode*>::iterator u_n = sortedBaseNodes.begin();
+ double f = u_n->first, range = sortedBaseNodes.rbegin()->first - f;
+ for ( ; u_n != sortedBaseNodes.end(); u_n++ )
+ {
+ double par = ( u_n->first - f ) / range;
+ vector<const SMDS_MeshNode*>& nCol = theParam2ColumnMap[ par ];
+ nCol.resize( nbRows );
+ nCol[0] = u_n->second;
}
- // load nodes from e1
+ // fill theParam2ColumnMap column by column by passing from nodes on
+ // theBaseEdge up via mesh faces on theFace
- std::map< double, const SMDS_MeshNode*> sortedNodes; // sort by param on edge
- nIt = sm1->GetNodes();
- while ( nIt->more() ) {
- node = nIt->next();
- if(IsMedium(node))
- continue;
- const SMDS_EdgePosition* pos =
- dynamic_cast<const SMDS_EdgePosition*>( node->GetPosition().get() );
- if ( !pos ) {
- return false;
- }
- sortedNodes.insert( std::make_pair( pos->GetUParameter(), node ));
- }
- loadedNodes.insert( nVecf[ vsize - 1 ] = smVft->GetNodes()->next() );
- std::map< double, const SMDS_MeshNode*>::iterator u_n = sortedNodes.begin();
- int row = rev1 ? vsize - 1 : 0;
- int dRow = rev1 ? -1 : +1;
- for ( ; u_n != sortedNodes.end(); u_n++ ) {
- row += dRow;
- loadedNodes.insert( nVecf[ row ] = u_n->second );
- }
-
- // try to load the rest nodes
-
- // get all faces from theFace
- TIDSortedElemSet allFaces, foundFaces;
- eIt = smFace->GetElements();
- while ( eIt->more() ) {
- const SMDS_MeshElement* e = eIt->next();
- if ( e->GetType() == SMDSAbs_Face )
- allFaces.insert( e );
- }
- // Starting from 2 neighbour nodes on theBaseEdge, look for a face
- // the nodes belong to, and between the nodes of the found face,
- // look for a not loaded node considering this node to be the next
- // in a column of the starting second node. Repeat, starting
- // from nodes next to the previous starting nodes in their columns,
- // and so on while a face can be found. Then go the the next pair
- // of nodes on theBaseEdge.
- TParam2ColumnMap::iterator par_nVec_1 = theParam2ColumnMap.begin();
- TParam2ColumnMap::iterator par_nVec_2 = par_nVec_1;
- // loop on columns
- int col = 0;
- for ( par_nVec_2++; par_nVec_2 != theParam2ColumnMap.end(); par_nVec_1++, par_nVec_2++ ) {
- col++;
- row = 0;
- const SMDS_MeshNode* n1 = par_nVec_1->second[ row ];
- const SMDS_MeshNode* n2 = par_nVec_2->second[ row ];
- const SMDS_MeshElement* face = 0;
- bool lastColOnClosedFace = ( nVecf[ row ] == n2 );
- do {
- // look for a face by 2 nodes
- face = SMESH_MeshEditor::FindFaceInSet( n1, n2, allFaces, foundFaces );
- if ( face ) {
- int nbFaceNodes = face->NbNodes();
- if ( face->IsQuadratic() )
- nbFaceNodes /= 2;
- if ( nbFaceNodes>4 ) {
- RETURN_BAD_RESULT(" Too many nodes in a face: " << nbFaceNodes );
- }
- // look for a not loaded node of the <face>
- bool found = false;
- const SMDS_MeshNode* n3 = 0; // a node defferent from n1 and n2
- for ( int i = 0; i < nbFaceNodes && !found; ++i ) {
- node = face->GetNode( i );
- found = loadedNodes.insert( node ).second;
- if ( !found && node != n1 && node != n2 )
- n3 = node;
- }
- if ( lastColOnClosedFace && row + 1 < vsize ) {
- node = nVecf[ row + 1 ];
- found = ( face->GetNodeIndex( node ) >= 0 );
- }
- if ( found ) {
- if ( ++row > vsize - 1 ) {
- RETURN_BAD_RESULT( "Too many nodes in column "<< col <<": "<< row+1);
- }
- par_nVec_2->second[ row ] = node;
- foundFaces.insert( face );
- n2 = node;
- if ( nbFaceNodes==4 ) {
- n1 = par_nVec_1->second[ row ];
- }
- }
- else if ( nbFaceNodes==3 && n3 == par_nVec_1->second[ row + 1 ] ) {
- n1 = n3;
- }
- else {
- RETURN_BAD_RESULT( "Not quad mesh, column "<< col );
- }
+ TParam2ColumnMap::iterator par_nVec_2 = theParam2ColumnMap.begin();
+ TParam2ColumnMap::iterator par_nVec_1 = par_nVec_2++;
+ TIDSortedElemSet emptySet, avoidSet;
+ for ( ; par_nVec_2 != theParam2ColumnMap.end(); ++par_nVec_1, ++par_nVec_2 )
+ {
+ vector<const SMDS_MeshNode*>& nCol1 = par_nVec_1->second;
+ vector<const SMDS_MeshNode*>& nCol2 = par_nVec_2->second;
+
+ int i1, i2, iRow = 0;
+ const SMDS_MeshNode *n1 = nCol1[0], *n2 = nCol2[0];
+ // find face sharing node n1 and n2 and belonging to faceSubMesh
+ while ( const SMDS_MeshElement* face =
+ SMESH_MeshEditor::FindFaceInSet( n1, n2, emptySet, avoidSet, &i1, &i2))
+ {
+ if ( faceSubMesh->Contains( face ))
+ {
+ int nbNodes = face->IsQuadratic() ? face->NbNodes()/2 : face->NbNodes();
+ if ( nbNodes != 4 )
+ return false;
+ n1 = face->GetNode( (i2+2) % 4 ); // opposite corner of quadrangle face
+ n2 = face->GetNode( (i1+2) % 4 );
+ if ( ++iRow >= nbRows )
+ return false;
+ nCol1[ iRow ] = n1;
+ nCol2[ iRow ] = n2;
+ avoidSet.clear();
}
+ avoidSet.insert( face );
}
- while ( face && n1 && n2 );
-
- if ( row < vsize - 1 ) {
- MESSAGE( "Too few nodes in column "<< col <<": "<< row+1);
- MESSAGE( "Base node 1: "<< par_nVec_1->second[0]);
- MESSAGE( "Base node 2: "<< par_nVec_2->second[0]);
- if ( n1 ) { MESSAGE( "Current node 1: "<< n1); }
- else { MESSAGE( "Current node 1: NULL"); }
- if ( n2 ) { MESSAGE( "Current node 2: "<< n2); }
- else { MESSAGE( "Current node 2: NULL"); }
- MESSAGE( "first base node: "<< theParam2ColumnMap.begin()->second[0]);
- MESSAGE( "last base node: "<< theParam2ColumnMap.rbegin()->second[0]);
- return false;
- }
- } // loop on columns
-
+ if ( iRow + 1 < nbRows ) // compact if necessary
+ nCol1.resize( iRow + 1 ), nCol2.resize( iRow + 1 );
+ }
return true;
}
return ancestors.Extent();
}
+//=======================================================================
+//function : GetSubShapeOri
+//purpose : Return orientation of sub-shape in the main shape
+//=======================================================================
+
+TopAbs_Orientation SMESH_MesherHelper::GetSubShapeOri(const TopoDS_Shape& shape,
+ const TopoDS_Shape& subShape)
+{
+ TopAbs_Orientation ori = TopAbs_Orientation(-1);
+ if ( !shape.IsNull() && !subShape.IsNull() )
+ {
+ TopExp_Explorer e( shape, subShape.ShapeType() );
+ if ( shape.Orientation() >= TopAbs_INTERNAL ) // TopAbs_INTERNAL or TopAbs_EXTERNAL
+ e.Init( shape.Oriented(TopAbs_FORWARD), subShape.ShapeType() );
+ for ( ; e.More(); e.Next())
+ if ( subShape.IsSame( e.Current() ))
+ break;
+ if ( e.More() )
+ ori = e.Current().Orientation();
+ }
+ return ori;
+}
+
+//=======================================================================
+//function : IsSubShape
+//purpose :
+//=======================================================================
+
+bool SMESH_MesherHelper::IsSubShape( const TopoDS_Shape& shape,
+ const TopoDS_Shape& mainShape )
+{
+ if ( !shape.IsNull() && !mainShape.IsNull() )
+ {
+ for ( TopExp_Explorer exp( mainShape, shape.ShapeType());
+ exp.More();
+ exp.Next() )
+ if ( shape.IsSame( exp.Current() ))
+ return true;
+ }
+ SCRUTE((shape.IsNull()));
+ SCRUTE((mainShape.IsNull()));
+ return false;
+}
+
+//=======================================================================
+//function : IsSubShape
+//purpose :
+//=======================================================================
+
+bool SMESH_MesherHelper::IsSubShape( const TopoDS_Shape& shape, SMESH_Mesh* aMesh )
+{
+ if ( shape.IsNull() || !aMesh )
+ return false;
+ return
+ aMesh->GetMeshDS()->ShapeToIndex( shape ) ||
+ // PAL16202
+ (shape.ShapeType() == TopAbs_COMPOUND && aMesh->GetMeshDS()->IsGroupOfSubShapes( shape ));
+}
+
+//================================================================================
+/*!
+ * \brief Return maximal tolerance of shape
+ */
+//================================================================================
+
+double SMESH_MesherHelper::MaxTolerance( const TopoDS_Shape& shape )
+{
+ double tol = Precision::Confusion();
+ TopExp_Explorer exp;
+ for ( exp.Init( shape, TopAbs_FACE ); exp.More(); exp.Next() )
+ tol = Max( tol, BRep_Tool::Tolerance( TopoDS::Face( exp.Current())));
+ for ( exp.Init( shape, TopAbs_EDGE ); exp.More(); exp.Next() )
+ tol = Max( tol, BRep_Tool::Tolerance( TopoDS::Edge( exp.Current())));
+ for ( exp.Init( shape, TopAbs_VERTEX ); exp.More(); exp.Next() )
+ tol = Max( tol, BRep_Tool::Tolerance( TopoDS::Vertex( exp.Current())));
+
+ return tol;
+}
+
//=======================================================================
//function : IsQuadraticMesh
//purpose : Check mesh without geometry for: if all elements on this shape are quadratic,
double SMESH_MesherHelper::GetOtherParam(const double param) const
{
- return fabs(param-myPar1) < fabs(param-myPar2) ? myPar2 : myPar1;
+ int i = myParIndex & U_periodic ? 0 : 1;
+ return fabs(param-myPar1[i]) < fabs(param-myPar2[i]) ? myPar2[i] : myPar1[i];
}
+//#include <Perf_Meter.hxx>
+
//=======================================================================
namespace { // Structures used by FixQuadraticElements()
//=======================================================================
#define __DMP__(txt) \
-//cout << txt
+ //cout << txt
#define MSG(txt) __DMP__(txt<<endl)
#define MSGBEG(txt) __DMP__(txt)
- const double straightTol2 = 1e-33; // to detect straing links
+ //const double straightTol2 = 1e-33; // to detect straing links
+ bool isStraightLink(double linkLen2, double middleNodeMove2)
+ {
+ // straight if <node move> < 1/15 * <link length>
+ return middleNodeMove2 < 1/15./15. * linkLen2;
+ }
struct QFace;
// ---------------------------------------
{ _nodeMove += move; _nbMoves += sum ? (_nbMoves==0) : 1; }
gp_XYZ Move() const { return _nodeMove.XYZ() / _nbMoves; }
bool IsMoved() const { return (_nbMoves > 0 && !IsStraight()); }
- bool IsStraight() const { return _nodeMove.SquareMagnitude() <= straightTol2; }
-
+ bool IsStraight() const
+ { return isStraightLink( (XYZ(node1())-XYZ(node2())).SquareModulus(),
+ _nodeMove.SquareMagnitude());
+ }
bool operator<(const QLink& other) const {
return (node1()->GetID() == other.node1()->GetID() ?
node2()->GetID() < other.node2()->GetID() :
node1()->GetID() < other.node1()->GetID());
}
- struct PtrComparator {
- bool operator() (const QLink* l1, const QLink* l2 ) const { return *l1 < *l2; }
- };
+// struct PtrComparator {
+// bool operator() (const QLink* l1, const QLink* l2 ) const { return *l1 < *l2; }
+// };
};
// ---------------------------------------------------------
/*!
TChainLink(const QLink* qlink=0):_qlink(qlink) {
_qfaces[0] = _qfaces[1] = 0;
}
- void SetFace(const QFace* face) { int iF = _qfaces[0] ? 1 : 0; _qfaces[iF]=face; }
+ void SetFace(const QFace* face) const { int iF = _qfaces[0] ? 1 : 0; _qfaces[iF]=face; }
bool IsBoundary() const { return !_qfaces[1]; }
/*!
* \brief Face shared by two volumes and bound by QLinks
*/
- struct QFace: public TIDSortedElemSet
+ struct QFace: public TIDSortedNodeSet
{
mutable const SMDS_MeshElement* _volumes[2];
mutable vector< const QLink* > _sides;
mutable bool _sideIsAdded[4]; // added in chain of links
gp_Vec _normal;
+#ifdef _DEBUG_
+ mutable const SMDS_MeshElement* _face;
+#endif
- QFace( const vector< const QLink*>& links );
+ QFace( const vector< const QLink*>& links, const SMDS_MeshElement* face=0 );
void SetVolume(const SMDS_MeshElement* v) const { _volumes[ _volumes[0] ? 1 : 0 ] = v; }
for (int i=0; i<_sides.size(); ++i ) if ( _sides[i] == side ) return i;
return -1;
}
- bool GetLinkChain( int iSide, TChain& chain, SMDS_TypeOfPosition pos, int& error) const;
+ bool GetLinkChain( int iSide, TChain& chain, SMDS_TypeOfPosition pos, int& err) const;
- bool GetLinkChain( TChainLink& link, TChain& chain, SMDS_TypeOfPosition pos, int& error) const
+ bool GetLinkChain( TChainLink& link, TChain& chain, SMDS_TypeOfPosition pos, int& err) const
{
int i = LinkIndex( link._qlink );
if ( i < 0 ) return true;
_sideIsAdded[i] = true;
link.SetFace( this );
// continue from opposite link
- return GetLinkChain( (i+2)%_sides.size(), chain, pos, error );
+ return GetLinkChain( (i+2)%_sides.size(), chain, pos, err );
}
bool IsBoundary() const { return !_volumes[1]; }
bool Contains( const SMDS_MeshNode* node ) const { return count(node); }
+ bool IsSpoiled(const QLink* bentLink ) const;
+
TLinkInSet GetBoundaryLink( const TLinkSet& links,
const TChainLink& avoidLink,
TLinkInSet * notBoundaryLink = 0,
const SMDS_MeshNode* nodeToContain = 0,
- bool * isAdjacentUsed = 0) const;
+ bool * isAdjacentUsed = 0,
+ int nbRecursionsLeft = -1) const;
TLinkInSet GetLinkByNode( const TLinkSet& links,
const TChainLink& avoidLink,
ostream& operator << (ostream& out, const QFace& f)
{
out <<"QFace nodes: "/*<< &f << " "*/;
- for ( TIDSortedElemSet::const_iterator n = f.begin(); n != f.end(); ++n )
+ for ( TIDSortedNodeSet::const_iterator n = f.begin(); n != f.end(); ++n )
out << (*n)->GetID() << " ";
out << " \tvolumes: "
<< (f._volumes[0] ? f._volumes[0]->GetID() : 0) << " "
*/
//================================================================================
- QFace::QFace( const vector< const QLink*>& links )
+ QFace::QFace( const vector< const QLink*>& links, const SMDS_MeshElement* face )
{
_volumes[0] = _volumes[1] = 0;
_sides = links;
_normal /= sqrt( normSqSize );
else
_normal.SetCoord(1e-33,0,0);
+
+#ifdef _DEBUG_
+ _face = face;
+#endif
}
//================================================================================
/*!
- * \brief Make up chain of links
+ * \brief Make up a chain of links
* \param iSide - link to add first
* \param chain - chain to fill in
* \param pos - postion of medium nodes the links should have
if ( _sides.size() != 4 ) { // triangle - visit all my continous faces
MSGBEG( *this );
- for ( int i = 0; i < _sides.size(); ++i ) {
- if ( !_sideIsAdded[i] && _sides[i] ) {
- _sideIsAdded[i]=true;
- TChain::iterator chLink = chain.insert( chain.begin(), TChainLink(_sides[i]));
- chLink->SetFace( this );
- if ( _sides[i]->MediumPos() >= pos )
- if ( const QFace* f = _sides[i]->GetContinuesFace( this ))
- f->GetLinkChain( *chLink, chain, pos, error );
+ TLinkSet links;
+ list< const QFace* > faces( 1, this );
+ while ( !faces.empty() ) {
+ const QFace* face = faces.front();
+ for ( int i = 0; i < face->_sides.size(); ++i ) {
+ if ( !face->_sideIsAdded[i] && face->_sides[i] ) {
+ face->_sideIsAdded[i] = true;
+ // find a face side in the chain
+ TLinkInSet chLink = links.insert( TChainLink(face->_sides[i])).first;
+// TChain::iterator chLink = chain.begin();
+// for ( ; chLink != chain.end(); ++chLink )
+// if ( chLink->_qlink == face->_sides[i] )
+// break;
+// if ( chLink == chain.end() )
+// chLink = chain.insert( chain.begin(), TChainLink(face->_sides[i]));
+ // add a face to a chained link and put a continues face in the queue
+ chLink->SetFace( face );
+ if ( face->_sides[i]->MediumPos() >= pos )
+ if ( const QFace* contFace = face->_sides[i]->GetContinuesFace( face ))
+ faces.push_back( contFace );
+ }
}
+ faces.pop_front();
}
if ( error < ERR_TRI )
error = ERR_TRI;
+ chain.insert( chain.end(), links.begin(),links.end() );
return false;
}
_sideIsAdded[iSide] = true; // not to add this link to chain again
chLink->SetFace( this );
MSGBEG( *this );
- // propagate from rectangle to neighbour faces
+ // propagate from quadrangle to neighbour faces
if ( link->MediumPos() >= pos ) {
int nbLinkFaces = link->_faces.size();
- if ( nbLinkFaces == 4 || nbLinkFaces < 4 && link->OnBoundary()) {
+ if ( nbLinkFaces == 4 || (nbLinkFaces < 4 && link->OnBoundary())) {
// hexahedral mesh or boundary quadrangles - goto a continous face
if ( const QFace* f = link->GetContinuesFace( this ))
return f->GetLinkChain( *chLink, chain, pos, error );
* \param nodeToContain - node the returned link must contain; if provided, search
* also performed on adjacent faces
* \param isAdjacentUsed - returns true if link is found in adjacent faces
+ * \param nbRecursionsLeft - to limit recursion
*/
//================================================================================
const TChainLink& avoidLink,
TLinkInSet * notBoundaryLink,
const SMDS_MeshNode* nodeToContain,
- bool * isAdjacentUsed) const
+ bool * isAdjacentUsed,
+ int nbRecursionsLeft) const
{
TLinkInSet linksEnd = links.end(), boundaryLink = linksEnd;
continue;
TLinkInSet link = links.find( _sides[iL] );
if ( link == linksEnd ) continue;
+ if ( (*link)->MediumPos() > SMDS_TOP_FACE )
+ continue; // We work on faces here, don't go inside a solid
// check link
if ( link->IsBoundary() ) {
if ( boundaryLink != linksEnd ) break;
}
- if ( boundaryLink == linksEnd && nodeToContain ) // cellect adjacent faces
+ if ( boundaryLink == linksEnd && nodeToContain ) // collect adjacent faces
if ( const QFace* adj = link->NextFace( this ))
if ( adj->Contains( nodeToContain ))
adjacentFaces.push_back( make_pair( adj, link ));
}
if ( isAdjacentUsed ) *isAdjacentUsed = false;
- if ( boundaryLink == linksEnd && nodeToContain ) // check adjacent faces
+ if ( boundaryLink == linksEnd && nodeToContain && nbRecursionsLeft) // check adjacent faces
{
+ if ( nbRecursionsLeft < 0 )
+ nbRecursionsLeft = nodeToContain->NbInverseElements();
TFaceLinkList::iterator adj = adjacentFaces.begin();
for ( ; boundaryLink == linksEnd && adj != adjacentFaces.end(); ++adj )
- boundaryLink = adj->first->GetBoundaryLink( links, *(adj->second),
- 0, nodeToContain, isAdjacentUsed);
+ boundaryLink = adj->first->GetBoundaryLink( links, *(adj->second), 0, nodeToContain,
+ isAdjacentUsed, nbRecursionsLeft-1);
if ( isAdjacentUsed ) *isAdjacentUsed = true;
}
return boundaryLink;
int iL1 = (iL + 1) % 3, iL2 = (iL + 2) % 3; // indices of the two other links of triangle
TLinkInSet link1 = theLinks.find( _sides[iL1] );
TLinkInSet link2 = theLinks.find( _sides[iL2] );
+ if ( link1 == theLinks.end() || link2 == theLinks.end() )
+ return thePrevLen;
const QFace* f1 = link1->NextFace( this ); // adjacent faces
const QFace* f2 = link2->NextFace( this );
// propagate to adjacent faces till limit step or boundary
double len1 = thePrevLen + (theLink->MiddlePnt() - _sides[iL1]->MiddlePnt()).Modulus();
double len2 = thePrevLen + (theLink->MiddlePnt() - _sides[iL2]->MiddlePnt()).Modulus();
- gp_Vec linkDir1, linkDir2;
+ gp_Vec linkDir1(0,0,0); // initialize to avoid valgrind error ("Conditional jump...")
+ gp_Vec linkDir2(0,0,0);
try {
OCC_CATCH_SIGNALS;
if ( f1 )
return fullLen;
}
+ //================================================================================
+ /*!
+ * \brief Checks if the face is distorted due to bentLink
+ */
+ //================================================================================
+
+ bool QFace::IsSpoiled(const QLink* bentLink ) const
+ {
+ // code is valid for convex faces only
+ gp_XYZ gc(0,0,0);
+ for ( TIDSortedNodeSet::const_iterator n = begin(); n!=end(); ++n)
+ gc += XYZ( *n ) / size();
+ for (unsigned i = 0; i < _sides.size(); ++i )
+ {
+ if ( _sides[i] == bentLink ) continue;
+ gp_Vec linkNorm = _normal ^ gp_Vec( XYZ(_sides[i]->node1()), XYZ(_sides[i]->node2()));
+ gp_Vec vecOut( gc, _sides[i]->MiddlePnt() );
+ if ( linkNorm * vecOut < 0 )
+ linkNorm.Reverse();
+ double mag2 = linkNorm.SquareMagnitude();
+ if ( mag2 > numeric_limits<double>::min() )
+ linkNorm /= sqrt( mag2 );
+ gp_Vec vecBent ( _sides[i]->MiddlePnt(), bentLink->MediumPnt());
+ gp_Vec vecStraight( _sides[i]->MiddlePnt(), bentLink->MiddlePnt());
+ if ( vecBent * linkNorm > -0.1*vecStraight.Magnitude() )
+ return true;
+ }
+ return false;
+
+ }
+
//================================================================================
/*!
* \brief Find pairs of continues faces
TLinkSet linkSet( allLinks.begin(), allLinks.end());
TLinkInSet linkIt = linkSet.begin(), linksEnd = linkSet.end();
- // move in 2d if we are on geom face
-// TopoDS_Face face;
-// TopLoc_Location loc;
-// SMESH_MesherHelper faceHelper( *helper.GetMesh());
-// while ( linkIt->IsBoundary()) ++linkIt;
-// if ( linkIt == linksEnd ) return;
-// if ( (*linkIt)->MediumPos() == SMDS_TOP_FACE ) {
-// bool checkPos = true;
-// TopoDS_Shape f = helper.GetSubShapeByNode( (*linkIt)->_mediumNode, helper.GetMeshDS() );
-// if ( !f.IsNull() && f.ShapeType() == TopAbs_FACE ) {
-// face = TopoDS::Face( f );
-// helper.GetNodeUV( face, (*linkIt)->_mediumNode, 0, &checkPos);
-// if (checkPos)
-// face.Nullify();
-// else
-// faceHelper.SetSubShape( face );
-// }
-// }
for ( linkIt = linkSet.begin(); linkIt != linksEnd; ++linkIt)
{
if ( linkIt->IsBoundary() && !(*linkIt)->IsStraight() && linkIt->_qfaces[0])
{
-// if ( !face.IsNull() ) {
-// const SMDS_MeshNode* inFaceNode =
-// faceHelper.GetNodeUVneedInFaceNode() ? linkIt->_qfaces[0]->GetNodeInFace() : 0;
-// gp_XY uvm = helper.GetNodeUV( face, (*linkIt)->_mediumNode, inFaceNode );
-// gp_XY uv1 = helper.GetNodeUV( face, (*linkIt)->node1(), inFaceNode);
-// gp_XY uv2 = helper.GetNodeUV( face, (*linkIt)->node2(), inFaceNode);
-// gp_XY uvMove = uvm - helper.GetMiddleUV( BRep_Tool::Surface(face,loc), uv1, uv2);
-// gp_Vec move( uvMove.X(), uvMove.Y(), 0 );
-// linkIt->_qfaces[0]->MoveByBoundary( *linkIt, move, linkSet, &faceHelper );
-// }
-// else {
- linkIt->_qfaces[0]->MoveByBoundary( *linkIt, (*linkIt)->_nodeMove, linkSet );
- //}
+ // move iff a boundary link is bent towards inside of a face (issue 0021084)
+ const QFace* face = linkIt->_qfaces[0];
+ gp_XYZ pIn = ( face->_sides[0]->MiddlePnt() +
+ face->_sides[1]->MiddlePnt() +
+ face->_sides[2]->MiddlePnt() ) / 3.;
+ gp_XYZ insideDir( pIn - (*linkIt)->MiddlePnt());
+ bool linkBentInside = ((*linkIt)->_nodeMove.Dot( insideDir ) > 0 );
+ //if ( face->IsSpoiled( linkIt->_qlink ))
+ if ( linkBentInside )
+ face->MoveByBoundary( *linkIt, (*linkIt)->_nodeMove, linkSet );
}
}
}
enum TSplitTriaResult {
_OK, _NO_CORNERS, _FEW_ROWS, _MANY_ROWS, _NO_SIDELINK, _BAD_MIDQUAD, _NOT_RECT,
- _NO_MIDQUAD, _NO_UPTRIA, _BAD_SET_SIZE, _BAD_CORNER, _BAD_START, _NO_BOTLINK };
+ _NO_MIDQUAD, _NO_UPTRIA, _BAD_SET_SIZE, _BAD_CORNER, _BAD_START, _NO_BOTLINK, _TWISTED_CHAIN };
TSplitTriaResult splitTrianglesIntoChains( TChain & allLinks,
vector< TChain> & resultChains,
const QFace* botTria = botLink->_qfaces[0]; // bottom triangle bound by botLink
if ( !botTria )
{ // the column ends
+ if ( botLink == startLink )
+ return _TWISTED_CHAIN; // issue 0020951
linkSet.erase( botLink );
if ( iRow != rowChains.size() )
return _FEW_ROWS; // different nb of rows in columns
// next bottom link ends at the new corner
linkSet.erase( botLink );
botLink = upTria->GetLinkByNode( linkSet, (isCase2 ? *sideLink : *midQuadLink), corner );
- if ( botLink == linksEnd || botLink == (isCase2 ? midQuadLink : sideLink))
+ if ( botLink == linksEnd || botLink == midQuadLink || botLink == sideLink)
return _NO_BOTLINK;
+ if ( midQuadLink == startLink || sideLink == startLink )
+ return _TWISTED_CHAIN; // issue 0020951
linkSet.erase( midQuadLink );
linkSet.erase( sideLink );
return _OK;
}
-}
+} //namespace
//=======================================================================
/*!
void SMESH_MesherHelper::FixQuadraticElements(bool volumeOnly)
{
- // apply algorithm to solids or geom faces
+ // 0. Apply algorithm to solids or geom faces
// ----------------------------------------------
if ( myShape.IsNull() ) {
if ( !myMesh->HasShapeToMesh() ) return;
SetSubShape( myMesh->GetShapeToMesh() );
+#ifdef _DEBUG_
+ int nbSolids = 0;
+ TopTools_IndexedMapOfShape solids;
+ TopExp::MapShapes(myShape,TopAbs_SOLID,solids);
+ nbSolids = solids.Extent();
+#endif
TopTools_MapOfShape faces; // faces not in solid or in not meshed solid
for ( TopExp_Explorer f(myShape,TopAbs_FACE,TopAbs_SOLID); f.More(); f.Next() ) {
- faces.Add( f.Current() );
+ faces.Add( f.Current() ); // not in solid
}
for ( TopExp_Explorer s(myShape,TopAbs_SOLID); s.More(); s.Next() ) {
if ( myMesh->GetSubMesh( s.Current() )->IsEmpty() ) { // get faces of solid
for ( TopExp_Explorer f( s.Current(), TopAbs_FACE); f.More(); f.Next() )
- faces.Add( f.Current() );
+ faces.Add( f.Current() ); // in not meshed solid
}
else { // fix nodes in the solid and its faces
+ MSG("FIX SOLID " << nbSolids-- << " #" << GetMeshDS()->ShapeToIndex(s.Current()));
SMESH_MesherHelper h(*myMesh);
h.SetSubShape( s.Current() );
h.FixQuadraticElements(false);
}
}
// fix nodes on geom faces
+#ifdef _DEBUG_
+ int nbfaces = faces.Extent();
+#endif
for ( TopTools_MapIteratorOfMapOfShape fIt( faces ); fIt.More(); fIt.Next() ) {
+ MSG("FIX FACE " << nbfaces-- << " #" << GetMeshDS()->ShapeToIndex(fIt.Key()));
SMESH_MesherHelper h(*myMesh);
h.SetSubShape( fIt.Key() );
h.FixQuadraticElements(true);
}
+ //perf_print_all_meters(1);
return;
}
- // Find out type of elements and get iterator on them
+ // 1. Find out type of elements and get iterator on them
// ---------------------------------------------------
SMDS_ElemIteratorPtr elemIt;
if ( !elemIt || !elemIt->more() || elemType < SMDSAbs_Face )
return;
- // Fill in auxiliary data structures
+ // 2. Fill in auxiliary data structures
// ----------------------------------
set< QLink > links;
set< QFace >::iterator pFace;
bool isCurved = false;
- bool hasRectFaces = false;
- set<int> nbElemNodeSet;
+ //bool hasRectFaces = false;
+ //set<int> nbElemNodeSet;
if ( elemType == SMDSAbs_Volume )
{
for ( int iF = 0; iF < volTool.NbFaces(); ++iF ) // loop on faces of volume
{
int nbN = volTool.NbFaceNodes( iF );
- nbElemNodeSet.insert( nbN );
+ //nbElemNodeSet.insert( nbN );
const SMDS_MeshNode** faceNodes = volTool.GetFaceNodes( iF );
vector< const QLink* > faceLinks( nbN/2 );
for ( int iN = 0; iN < nbN; iN += 2 ) // loop on links of a face
if ( pFace->NbVolumes() == 0 )
pFace->AddSelfToLinks();
pFace->SetVolume( vol );
- hasRectFaces = hasRectFaces ||
- ( volTool.GetVolumeType() == SMDS_VolumeTool::QUAD_HEXA ||
- volTool.GetVolumeType() == SMDS_VolumeTool::QUAD_PENTA );
+// hasRectFaces = hasRectFaces ||
+// ( volTool.GetVolumeType() == SMDS_VolumeTool::QUAD_HEXA ||
+// volTool.GetVolumeType() == SMDS_VolumeTool::QUAD_PENTA );
+#ifdef _DEBUG_
+ if ( nbN == 6 )
+ pFace->_face = GetMeshDS()->FindFace(faceNodes[0],faceNodes[2],faceNodes[4]);
+ else
+ pFace->_face = GetMeshDS()->FindFace(faceNodes[0],faceNodes[2],
+ faceNodes[4],faceNodes[6] );
+#endif
}
}
set< QLink >::iterator pLink = links.begin();
const SMDS_MeshElement* face = elemIt->next();
if ( !face->IsQuadratic() )
continue;
- nbElemNodeSet.insert( face->NbNodes() );
+ //nbElemNodeSet.insert( face->NbNodes() );
int nbN = face->NbNodes()/2;
vector< const QLink* > faceLinks( nbN );
for ( int iN = 0; iN < nbN; ++iN ) // loop on links of a face
// store QFace
pFace = faces.insert( QFace( faceLinks )).first;
pFace->AddSelfToLinks();
- hasRectFaces = ( hasRectFaces || nbN == 4 );
+ //hasRectFaces = ( hasRectFaces || nbN == 4 );
}
}
if ( !isCurved )
return; // no curved edges of faces
- // Compute displacement of medium nodes
+ // 3. Compute displacement of medium nodes
// -------------------------------------
// two loops on faces: the first is to treat boundary links, the second is for internal ones
// not treat boundary of volumic submesh
int isInside = ( elemType == SMDSAbs_Volume && volumeOnly ) ? 1 : 0;
for ( ; isInside < 2; ++isInside ) {
- MSG( "--------------- LOOP " << isInside << " ------------------");
+ MSG( "--------------- LOOP (inside=" << isInside << ") ------------------");
SMDS_TypeOfPosition pos = isInside ? SMDS_TOP_3DSPACE : SMDS_TOP_FACE;
+ SMDS_TypeOfPosition bndPos = isInside ? SMDS_TOP_FACE : SMDS_TOP_EDGE;
for ( pFace = faces.begin(); pFace != faces.end(); ++pFace ) {
if ( bool(isInside) == pFace->IsBoundary() )
if ( !pFace->GetLinkChain( dir+2, rawChain, pos, error ) && error ==ERR_UNKNOWN ) continue;
vector< TChain > chains;
- if ( error == ERR_OK ) { // chains contains continues rectangles
+ if ( error == ERR_OK ) { // chain contains continues rectangles
chains.resize(1);
chains[0].splice( chains[0].begin(), rawChain );
}
- else if ( error == ERR_TRI ) { // chains contains continues triangles
+ else if ( error == ERR_TRI ) { // chain contains continues triangles
TSplitTriaResult res = splitTrianglesIntoChains( rawChain, chains, pos );
- if ( res != _OK ) { // not rectangles split into triangles
+ if ( res != _OK ) { // not quadrangles split into triangles
fixTriaNearBoundary( rawChain, *this );
break;
}
}
- else if ( error == ERR_PRISM ) { // side faces of prisms
+ else if ( error == ERR_PRISM ) { // quadrangle side faces of prisms
fixPrism( rawChain );
break;
}
TChain& chain = chains[iC];
if ( chain.empty() ) continue;
if ( chain.front()->IsStraight() && chain.back()->IsStraight() ) {
- MSG("3D straight");
+ MSG("3D straight - ignore");
+ continue;
+ }
+ if ( chain.front()->MediumPos() > bndPos ||
+ chain.back()->MediumPos() > bndPos ) {
+ MSG("Internal chain - ignore");
continue;
}
// mesure chain length and compute link position along the chain
// compute node displacement of end links in parametric space of face
const SMDS_MeshNode* nodeOnFace = (*(++chain.begin()))->_mediumNode;
TopoDS_Shape f = GetSubShapeByNode( nodeOnFace, GetMeshDS() );
- if ( !f.IsNull() && f.ShapeType() == TopAbs_FACE ) {
+ if ( !f.IsNull() && f.ShapeType() == TopAbs_FACE )
+ {
face = TopoDS::Face( f );
- for ( int is1 = 0; is1 < 2; ++is1 ) { // move0 or move1
+ Handle(Geom_Surface) surf = BRep_Tool::Surface(face,loc);
+ bool isStraight[2];
+ for ( int is1 = 0; is1 < 2; ++is1 ) // move0 or move1
+ {
TChainLink& link = is1 ? chain.back() : chain.front();
+ gp_XY uvm = GetNodeUV( face, link->_mediumNode, nodeOnFace, &checkUV);
gp_XY uv1 = GetNodeUV( face, link->node1(), nodeOnFace, &checkUV);
gp_XY uv2 = GetNodeUV( face, link->node2(), nodeOnFace, &checkUV);
- gp_XY uvm = GetNodeUV( face, link->_mediumNode, nodeOnFace, &checkUV);
- gp_XY uvMove = uvm - GetMiddleUV( BRep_Tool::Surface(face,loc), uv1, uv2);
- if ( is1 ) move1.SetCoord( uvMove.X(), uvMove.Y(), 0 );
- else move0.SetCoord( uvMove.X(), uvMove.Y(), 0 );
+ gp_XY uv12 = GetMiddleUV( surf, uv1, uv2);
+ // uvMove = uvm - uv12
+ gp_XY uvMove = applyIn2D(surf, uvm, uv12, gp_XY_Subtracted, /*inPeriod=*/false);
+ ( is1 ? move1 : move0 ).SetCoord( uvMove.X(), uvMove.Y(), 0 );
+ if ( !is1 ) // correct nodeOnFace for move1 (issue 0020919)
+ nodeOnFace = (*(++chain.rbegin()))->_mediumNode;
+ isStraight[is1] = isStraightLink( (uv2-uv1).SquareModulus(),uvMove.SquareModulus());
}
- if ( move0.SquareMagnitude() < straightTol2 &&
- move1.SquareMagnitude() < straightTol2 ) {
- MSG("2D straight");
+// if ( move0.SquareMagnitude() < straightTol2 &&
+// move1.SquareMagnitude() < straightTol2 ) {
+ if ( isStraight[0] && isStraight[1] ) {
+ MSG("2D straight - ignore");
continue; // straight - no need to move nodes of internal links
}
}
}
else {
// compute 3D displacement by 2D one
+ Handle(Geom_Surface) s = BRep_Tool::Surface(face,loc);
gp_XY oldUV = GetNodeUV( face, (*link1)->_mediumNode, 0, &checkUV);
- gp_XY newUV = oldUV + gp_XY( move.X(), move.Y() );
- gp_Pnt newPnt = BRep_Tool::Surface(face,loc)->Value( newUV.X(), newUV.Y());
+ gp_XY newUV = applyIn2D( s, oldUV, gp_XY( move.X(),move.Y()), gp_XY_Added);
+ gp_Pnt newPnt = s->Value( newUV.X(), newUV.Y());
move = gp_Vec( XYZ((*link1)->_mediumNode), newPnt.Transformed(loc) );
#ifdef _DEBUG_
if ( (XYZ((*link1)->node1()) - XYZ((*link1)->node2())).SquareModulus() <
{
gp_XY uv0 = GetNodeUV( face, (*link0)->_mediumNode, 0, &checkUV);
gp_XY uv2 = GetNodeUV( face, (*link2)->_mediumNode, 0, &checkUV);
- MSG( "uv0: "<<uv0.X()<<", "<<uv0.Y()<<" \t" <<
+ MSG( "TOO LONG MOVE \t" <<
+ "uv0: "<<uv0.X()<<", "<<uv0.Y()<<" \t" <<
"uv2: "<<uv2.X()<<", "<<uv2.Y()<<" \t" <<
"uvOld: "<<oldUV.X()<<", "<<oldUV.Y()<<" \t" <<
"newUV: "<<newUV.X()<<", "<<newUV.Y()<<" \t");
} // loop on faces
}
- // Move nodes
+ // 4. Move nodes
// -----------
for ( pLink = links.begin(); pLink != links.end(); ++pLink ) {
}
}
}
+
+//=======================================================================
+/*!
+ * \brief Iterator on ancestors of the given type
+ */
+//=======================================================================
+
+struct TAncestorsIterator : public SMDS_Iterator<const TopoDS_Shape*>
+{
+ TopTools_ListIteratorOfListOfShape _ancIter;
+ TopAbs_ShapeEnum _type;
+ TAncestorsIterator( const TopTools_ListOfShape& ancestors, TopAbs_ShapeEnum type)
+ : _ancIter( ancestors ), _type( type )
+ {
+ if ( _ancIter.More() && _ancIter.Value().ShapeType() != _type ) next();
+ }
+ virtual bool more()
+ {
+ return _ancIter.More();
+ }
+ virtual const TopoDS_Shape* next()
+ {
+ const TopoDS_Shape* s = _ancIter.More() ? & _ancIter.Value() : 0;
+ if ( _ancIter.More() )
+ for ( _ancIter.Next(); _ancIter.More(); _ancIter.Next())
+ if ( _ancIter.Value().ShapeType() == _type )
+ break;
+ return s;
+ }
+};
+
+//=======================================================================
+/*!
+ * \brief Return iterator on ancestors of the given type
+ */
+//=======================================================================
+
+PShapeIteratorPtr SMESH_MesherHelper::GetAncestors(const TopoDS_Shape& shape,
+ const SMESH_Mesh& mesh,
+ TopAbs_ShapeEnum ancestorType)
+{
+ return PShapeIteratorPtr( new TAncestorsIterator( mesh.GetAncestors(shape), ancestorType));
+}