-// Copyright (C) 2007-2016 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2022 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
#include "SMESH_HypoFilter.hxx"
#include "SMESH_Mesh.hxx"
#include "SMESH_MeshAlgos.hxx"
+#include "SMESH_MeshEditor.hxx"
#include "SMESH_ProxyMesh.hxx"
#include "SMESH_subMesh.hxx"
#include <Geom_RectangularTrimmedSurface.hxx>
#include <Geom_Surface.hxx>
#include <ShapeAnalysis.hxx>
+#include <ShapeAnalysis_Curve.hxx>
#include <TopExp.hxx>
#include <TopExp_Explorer.hxx>
#include <TopTools_ListIteratorOfListOfShape.hxx>
namespace {
- inline SMESH_TNodeXYZ XYZ(const SMDS_MeshNode* n) { return SMESH_TNodeXYZ(n); }
+ inline SMESH_NodeXYZ XYZ(const SMDS_MeshNode* n) { return SMESH_NodeXYZ(n); }
enum { U_periodic = 1, V_periodic = 2 };
}
//=======================================================================
//function : IsQuadraticSubMesh
-//purpose : Check submesh for given shape: if all elements on this shape
+//purpose : Check sub-meshes of a given shape: if all elements on sub-shapes
// are quadratic, quadratic elements will be created.
-// Also fill myTLinkNodeMap
+// Fill myTLinkNodeMap
//=======================================================================
bool SMESH_MesherHelper::IsQuadraticSubMesh(const TopoDS_Shape& aSh)
SMESHDS_Mesh* meshDS = GetMeshDS();
// we can create quadratic elements only if all elements
// created on sub-shapes of given shape are quadratic
- // also we have to fill myTLinkNodeMap
myCreateQuadratic = true;
- mySeamShapeIds.clear();
- myDegenShapeIds.clear();
TopAbs_ShapeEnum subType( aSh.ShapeType()==TopAbs_FACE ? TopAbs_EDGE : TopAbs_FACE );
if ( aSh.ShapeType()==TopAbs_COMPOUND )
{
}
SMDSAbs_ElementType elemType( subType==TopAbs_FACE ? SMDSAbs_Face : SMDSAbs_Edge );
-
- //int nbOldLinks = myTLinkNodeMap.size();
-
if ( !myMesh->HasShapeToMesh() )
{
if (( myCreateQuadratic = myMesh->NbFaces( ORDER_QUADRATIC )))
}
}
+//=======================================================================
+/*!
+ * \brief Copy shape information from another helper. Used to improve performance
+ * since SetSubShape() can be time consuming if there are many edges
+ */
+//=======================================================================
+
+void SMESH_MesherHelper::CopySubShapeInfo(const SMESH_MesherHelper& other)
+{
+ this->myShape = other.myShape;
+ this->myShapeID = other.myShapeID;
+ this->myDegenShapeIds = other.myDegenShapeIds;
+ this->mySeamShapeIds = other.mySeamShapeIds;
+ this->myPar1[0] = other.myPar1[0];
+ this->myPar1[1] = other.myPar1[1];
+ this->myPar2[0] = other.myPar2[0];
+ this->myPar2[1] = other.myPar2[1];
+ this->myParIndex = other.myParIndex;
+ this->myFace2Surface = other.myFace2Surface;
+}
+
//=======================================================================
//function : ShapeToIndex
//purpose : Convert a shape to its index in the SMESHDS_Mesh
{
gp_Pnt2d uv( Precision::Infinite(), Precision::Infinite() );
- const SMDS_PositionPtr Pos = n->GetPosition();
+ SMDS_PositionPtr pos = n->GetPosition();
bool uvOK = false;
- if ( Pos->GetTypeOfPosition() == SMDS_TOP_FACE )
+ if ( pos->GetTypeOfPosition() == SMDS_TOP_FACE )
{
// node has position on face
- const SMDS_FacePosition* fpos = static_cast<const SMDS_FacePosition*>( Pos );
+ SMDS_FacePositionPtr fpos = pos;
uv.SetCoord( fpos->GetUParameter(), fpos->GetVParameter() );
if ( check )
uvOK = CheckNodeUV( F, n, uv.ChangeCoord(), 2.*getFaceMaxTol( F )); // 2. from 22830
}
- else if ( Pos->GetTypeOfPosition() == SMDS_TOP_EDGE )
+ else if ( pos->GetTypeOfPosition() == SMDS_TOP_EDGE )
{
// node has position on EDGE => it is needed to find
// corresponding EDGE from FACE, get pcurve for this
// EDGE and retrieve value from this pcurve
- const SMDS_EdgePosition* epos = static_cast<const SMDS_EdgePosition*>( Pos );
- const int edgeID = n->getshapeId();
- const TopoDS_Edge& E = TopoDS::Edge( GetMeshDS()->IndexToShape( edgeID ));
+ SMDS_EdgePositionPtr epos = pos;
+ const int edgeID = n->getshapeId();
+ const TopoDS_Edge& E = TopoDS::Edge( GetMeshDS()->IndexToShape( edgeID ));
double f, l, u = epos->GetUParameter();
- Handle(Geom2d_Curve) C2d = BRep_Tool::CurveOnSurface( E, F, f, l );
+ Handle(Geom2d_Curve) C2d = BRep_Tool::CurveOnSurface( E, F, f, l );
bool validU = ( !C2d.IsNull() && ( f < u ) && ( u < l ));
if ( validU ) uv = C2d->Value( u );
else uv.SetCoord( Precision::Infinite(),0.);
uv = newUV;
}
}
- else if ( Pos->GetTypeOfPosition() == SMDS_TOP_VERTEX )
+ else if ( pos->GetTypeOfPosition() == SMDS_TOP_VERTEX )
{
if ( int vertexID = n->getshapeId() ) {
const TopoDS_Vertex& V = TopoDS::Vertex(GetMeshDS()->IndexToShape(vertexID));
if ( !C2d.IsNull() ) {
double u = ( V == IthVertex( 0, edge )) ? f : l;
uv = C2d->Value( u );
- uvOK = true;
+ gp_Pnt p = GetSurface( F )->Value( uv );
+ uvOK = ( p.Distance( BRep_Tool::Pnt( V )) < getFaceMaxTol( F ));
break;
}
}
if ( isSeam )
uv = getUVOnSeam( uv, GetNodeUV( F, n2, 0 ));
}
+ else if ( myParIndex && n2 )
+ {
+ gp_Pnt2d oldUV = uv;
+ gp_Pnt2d uv2 = GetNodeUV( F, n2, 0 );
+ if ( myParIndex & 1 )
+ uv.SetX( uv.X() + ShapeAnalysis::AdjustToPeriod( uv.X(), myPar1[0], myPar2[0]));
+ if ( myParIndex & 2 )
+ uv.SetY( uv.Y() + ShapeAnalysis::AdjustToPeriod( uv.Y(), myPar1[1], myPar2[1]));
+ if ( uv.SquareDistance( uv2 ) > oldUV.SquareDistance( uv2 ))
+ uv = oldUV;
+ }
}
}
else
// check that uv is correct
TopLoc_Location loc;
Handle(Geom_Surface) surface = BRep_Tool::Surface( F,loc );
- gp_Pnt nodePnt = XYZ( n ), surfPnt(0,0,0);
+ SMESH_NodeXYZ nXYZ( n );
+ gp_Pnt nodePnt = nXYZ, surfPnt(0,0,0);
double dist = 0;
if ( !loc.IsIdentity() ) nodePnt.Transform( loc.Transformation().Inverted() );
if ( infinit ||
(dist = nodePnt.Distance( surfPnt = surface->Value( uv.X(), uv.Y() ))) > tol )
{
setPosOnShapeValidity( shapeID, false );
- if ( !infinit && distXYZ ) {
- surfPnt.Transform( loc );
- distXYZ[0] = dist;
- distXYZ[1] = surfPnt.X(); distXYZ[2] = surfPnt.Y(); distXYZ[3]=surfPnt.Z();
- }
// uv incorrect, project the node to surface
- GeomAPI_ProjectPointOnSurf& projector = GetProjector( F, loc, tol );
- projector.Perform( nodePnt );
- if ( !projector.IsDone() || projector.NbPoints() < 1 )
- {
- MESSAGE( "SMESH_MesherHelper::CheckNodeUV() failed to project" );
- return false;
- }
- Quantity_Parameter U,V;
- projector.LowerDistanceParameters(U,V);
- uv.SetCoord( U,V );
- surfPnt = surface->Value( U, V );
- dist = nodePnt.Distance( surfPnt );
+ Handle(ShapeAnalysis_Surface) sprojector = GetSurface( F );
+ uv = sprojector->ValueOfUV( nXYZ, tol ).XY();
+ surfPnt = sprojector->Value( uv );
+ dist = surfPnt.Distance( nXYZ );
if ( distXYZ ) {
- surfPnt.Transform( loc );
distXYZ[0] = dist;
distXYZ[1] = surfPnt.X(); distXYZ[2] = surfPnt.Y(); distXYZ[3]=surfPnt.Z();
}
// store the fixed UV on the face
if ( myShape.IsSame(F) && shapeID == myShapeID && myFixNodeParameters )
const_cast<SMDS_MeshNode*>(n)->SetPosition
- ( SMDS_PositionPtr( new SMDS_FacePosition( U, V )));
+ ( SMDS_PositionPtr( new SMDS_FacePosition( uv.X(), uv.Y() )));
}
else if ( myShape.IsSame(F) && uv.Modulus() > numeric_limits<double>::min() )
{
//=======================================================================
//function : GetProjector
-//purpose : Return projector intitialized by given face without location, which is returned
+//purpose : Return projector initialized by given face without location, which is returned
//=======================================================================
GeomAPI_ProjectPointOnSurf& SMESH_MesherHelper::GetProjector(const TopoDS_Face& F,
return *( i_proj->second );
}
+//=======================================================================
+//function : GetProjector
+//purpose : Return projector initialized by given face, which is returned
+//=======================================================================
+
+GeomAPI_ProjectPointOnSurf& SMESH_MesherHelper::GetProjector(const TopoDS_Face& F,
+ double tol ) const
+{
+ Handle(Geom_Surface) surface = BRep_Tool::Surface( F );
+ int faceID = GetMeshDS()->ShapeToIndex( F );
+ TID2ProjectorOnSurf& i2proj = const_cast< TID2ProjectorOnSurf&>( myFace2Projector );
+ TID2ProjectorOnSurf::iterator i_proj = i2proj.find( faceID );
+ if ( i_proj == i2proj.end() )
+ {
+ if ( tol == 0 ) tol = BRep_Tool::Tolerance( F );
+ double U1, U2, V1, V2;
+ surface->Bounds(U1, U2, V1, V2);
+ GeomAPI_ProjectPointOnSurf* proj = new GeomAPI_ProjectPointOnSurf();
+ proj->Init( surface, U1, U2, V1, V2, tol );
+ i_proj = i2proj.insert( make_pair( faceID, proj )).first;
+ }
+ return *( i_proj->second );
+}
+
+//=======================================================================
+//function : GetPCProjector
+//purpose : Return projector initialized by given EDGE
+//=======================================================================
+
+GeomAPI_ProjectPointOnCurve& SMESH_MesherHelper::GetPCProjector(const TopoDS_Edge& E ) const
+{
+ int edgeID = GetMeshDS()->ShapeToIndex( E );
+ TID2ProjectorOnCurve& i2proj = const_cast< TID2ProjectorOnCurve&>( myEdge2Projector );
+ TID2ProjectorOnCurve::iterator i_proj = i2proj.insert( make_pair( edgeID, nullptr )).first;
+ if ( !i_proj->second )
+ {
+ double f,l;
+ Handle(Geom_Curve) curve = BRep_Tool::Curve( E,f,l );
+ i_proj->second = new GeomAPI_ProjectPointOnCurve();
+ i_proj->second->Init( curve, f, l );
+ }
+ GeomAPI_ProjectPointOnCurve* projector = i_proj->second;
+ return *projector;
+}
+
//=======================================================================
//function : GetSurface
//purpose : Return a cached ShapeAnalysis_Surface of a FACE
const SMDS_PositionPtr pos = n->GetPosition();
if ( pos->GetTypeOfPosition()==SMDS_TOP_EDGE )
{
- const SMDS_EdgePosition* epos = static_cast<const SMDS_EdgePosition*>( pos );
- param = epos->GetUParameter();
+ param = pos->GetParameters()[0];
}
else if( pos->GetTypeOfPosition() == SMDS_TOP_VERTEX )
{
int vertexID = n->getshapeId();
const TopoDS_Vertex& V = TopoDS::Vertex(meshDS->IndexToShape(vertexID));
param = BRep_Tool::Parameter( V, E );
+
+ if ( inEdgeNode )
+ {
+ BRepAdaptor_Curve curve( E );
+ if ( curve.IsPeriodic() )
+ {
+ double uInEdge = GetNodeU( E, inEdgeNode );
+ param += ShapeAnalysis::AdjustByPeriod( param, uInEdge, curve.Period() );
+ }
+ }
}
}
if ( check )
{
setPosOnShapeValidity( shapeID, false );
// u incorrect, project the node to the curve
- int edgeID = GetMeshDS()->ShapeToIndex( E );
- TID2ProjectorOnCurve& i2proj = const_cast< TID2ProjectorOnCurve&>( myEdge2Projector );
- TID2ProjectorOnCurve::iterator i_proj =
- i2proj.insert( make_pair( edgeID, (GeomAPI_ProjectPointOnCurve*) 0 )).first;
- if ( !i_proj->second )
- {
- i_proj->second = new GeomAPI_ProjectPointOnCurve();
- i_proj->second->Init( curve, f, l );
- }
- GeomAPI_ProjectPointOnCurve* projector = i_proj->second;
- projector->Perform( nodePnt );
- if ( projector->NbPoints() < 1 )
- {
- MESSAGE( "SMESH_MesherHelper::CheckNodeU() failed to project" );
- return false;
- }
- Quantity_Parameter U = projector->LowerDistanceParameter();
- u = double( U );
- curvPnt = curve->Value( u );
- dist = nodePnt.Distance( curvPnt );
+ //GeomAPI_ProjectPointOnCurve& projector = GetPCProjector( E ); -- bug in OCCT-7.5.3p1
+ GeomAdaptor_Curve curveAd( curve, f, l );
+ ShapeAnalysis_Curve projector;
+ dist = projector.Project( curveAd, nodePnt, tol, curvPnt, u, false );
+ // if ( projector.NbPoints() < 1 )
+ // {
+ // MESSAGE( "SMESH_MesherHelper::CheckNodeU() failed to project" );
+ // return false;
+ // }
if ( distXYZ ) {
+ curvPnt = curve->Value( u );
curvPnt.Transform( loc );
distXYZ[0] = dist;
distXYZ[1] = curvPnt.X(); distXYZ[2] = curvPnt.Y(); distXYZ[3]=curvPnt.Z();
// store the fixed U on the edge
if ( myShape.IsSame(E) && shapeID == myShapeID && myFixNodeParameters )
const_cast<SMDS_MeshNode*>(n)->SetPosition
- ( SMDS_PositionPtr( new SMDS_EdgePosition( U )));
+ ( SMDS_PositionPtr( new SMDS_EdgePosition( u )));
}
else if ( fabs( u ) > numeric_limits<double>::min() )
{
// get positions of the given nodes on shapes
if ( pos.second == TopAbs_FACE )
{
- F = TopoDS::Face(meshDS->IndexToShape( faceID = pos.first ));
+ F = TopoDS::Face( meshDS->IndexToShape( faceID = pos.first ));
uv[0] = GetNodeUV(F,n1,n2, force3d ? 0 : &uvOK[0]);
- if (( !force3d ) &&
- ( HasDegeneratedEdges() || GetSurface( F )->HasSingularities( 1e-7 )))
- {
- // IPAL52850 (degen VERTEX not at singularity)
- // project middle point to a surface
- SMESH_TNodeXYZ p1( n1 ), p2( n2 );
- gp_Pnt pMid = 0.5 * ( p1 + p2 );
- Handle(ShapeAnalysis_Surface) projector = GetSurface( F );
- gp_Pnt2d uvMid;
- if ( uvOK[0] )
- uvMid = projector->NextValueOfUV( uv[0], pMid, BRep_Tool::Tolerance( F ));
- else
- uvMid = projector->ValueOfUV( pMid, getFaceMaxTol( F ));
- if ( projector->Gap() * projector->Gap() < ( p1 - p2 ).SquareModulus() / 4 )
- {
- gp_Pnt pProj = projector->Value( uvMid );
- n12 = meshDS->AddNode( pProj.X(), pProj.Y(), pProj.Z() );
- meshDS->SetNodeOnFace( n12, faceID, uvMid.X(), uvMid.Y() );
- myTLinkNodeMap.insert( make_pair ( link, n12 ));
- return n12;
- }
- }
uv[1] = GetNodeUV(F,n2,n1, force3d ? 0 : &uvOK[1]);
}
else if ( pos.second == TopAbs_EDGE )
// nodes, else - medium between corresponding 3d points
if( ! F.IsNull() )
{
- //if ( uvOK[0] && uvOK[1] )
+ if ( IsDegenShape( n1->getshapeId() )) {
+ if ( myParIndex & U_periodic ) uv[0].SetCoord( 1, uv[1].Coord( 1 ));
+ else uv[0].SetCoord( 2, uv[1].Coord( 2 ));
+ }
+ else if ( IsDegenShape( n2->getshapeId() )) {
+ if ( myParIndex & U_periodic ) uv[1].SetCoord( 1, uv[0].Coord( 1 ));
+ else uv[1].SetCoord( 2, uv[0].Coord( 2 ));
+ }
+ TopLoc_Location loc;
+ Handle(Geom_Surface) S = BRep_Tool::Surface(F,loc);
+ gp_XY UV = GetMiddleUV( S, uv[0], uv[1] );
+ gp_Pnt P = S->Value( UV.X(), UV.Y() ).Transformed(loc);
+
+ SMESH_TNodeXYZ p1( n1 ), p2( n2 );
+ gp_Pnt pMid = 0.5 * ( p1 + p2 );
+ double distMid = pMid.SquareDistance( P );
+ double dist12 = ( p1 - p2 ).SquareModulus();
+ Handle(ShapeAnalysis_Surface) surfInfo = GetSurface( F );
+ if ( distMid > dist12 ||
+ HasDegeneratedEdges() ||
+ surfInfo->HasSingularities( 1e-7 ) )
{
- if ( IsDegenShape( n1->getshapeId() )) {
- if ( myParIndex & U_periodic ) uv[0].SetCoord( 1, uv[1].Coord( 1 ));
- else uv[0].SetCoord( 2, uv[1].Coord( 2 ));
- }
- else if ( IsDegenShape( n2->getshapeId() )) {
- if ( myParIndex & U_periodic ) uv[1].SetCoord( 1, uv[0].Coord( 1 ));
- else uv[1].SetCoord( 2, uv[0].Coord( 2 ));
- }
- TopLoc_Location loc;
- Handle(Geom_Surface) S = BRep_Tool::Surface(F,loc);
- gp_XY UV = GetMiddleUV( S, uv[0], uv[1] );
- gp_Pnt P = S->Value( UV.X(), UV.Y() ).Transformed(loc);
- n12 = meshDS->AddNode(P.X(), P.Y(), P.Z());
- // if ( mySetElemOnShape ) node is not elem!
- meshDS->SetNodeOnFace(n12, faceID, UV.X(), UV.Y());
- myTLinkNodeMap.insert(make_pair(link,n12));
- return n12;
+ // IPAL52850 (degen VERTEX not at singularity)
+ // project middle point to a surface
+ gp_Pnt2d uvMid;
+ if ( uvOK[0] )
+ uvMid = surfInfo->NextValueOfUV( uv[0], pMid, BRep_Tool::Tolerance( F ));
+ else
+ uvMid = surfInfo->ValueOfUV( pMid, getFaceMaxTol( F ));
+ if ( surfInfo->Gap() * surfInfo->Gap() < distMid )
+ P = surfInfo->Value( uvMid );
}
+ n12 = meshDS->AddNode(P.X(), P.Y(), P.Z());
+ // if ( mySetElemOnShape ) node is not elem!
+ meshDS->SetNodeOnFace(n12, faceID, UV.X(), UV.Y());
+ myTLinkNodeMap.insert(make_pair(link,n12));
+ return n12;
}
else if ( !E.IsNull() )
{
if ( !bestEdge.IsNull() )
{
- // move n12 to position of a successfull projection
+ // move n12 to position of a successful projection
//double tol = BRep_Tool::Tolerance(edges[ iOkEdge ]);
if ( !force3d /*&& distMiddleProj > 2*tol*/ )
{
//purpose : Creates a node
//=======================================================================
-SMDS_MeshNode* SMESH_MesherHelper::AddNode(double x, double y, double z, int ID,
+SMDS_MeshNode* SMESH_MesherHelper::AddNode(double x, double y, double z, smIdType ID,
double u, double v)
{
SMESHDS_Mesh * meshDS = GetMeshDS();
SMDS_MeshEdge* SMESH_MesherHelper::AddEdge(const SMDS_MeshNode* n1,
const SMDS_MeshNode* n2,
- const int id,
+ const smIdType id,
const bool force3d)
{
SMESHDS_Mesh * meshDS = GetMeshDS();
SMDS_MeshFace* SMESH_MesherHelper::AddFace(const SMDS_MeshNode* n1,
const SMDS_MeshNode* n2,
const SMDS_MeshNode* n3,
- const int id,
+ const smIdType id,
const bool force3d)
{
SMESHDS_Mesh * meshDS = GetMeshDS();
const SMDS_MeshNode* n2,
const SMDS_MeshNode* n3,
const SMDS_MeshNode* n4,
- const int id,
+ const smIdType id,
const bool force3d)
{
SMESHDS_Mesh * meshDS = GetMeshDS();
//=======================================================================
SMDS_MeshFace* SMESH_MesherHelper::AddPolygonalFace (const vector<const SMDS_MeshNode*>& nodes,
- const int id,
+ const smIdType id,
const bool force3d)
{
SMESHDS_Mesh * meshDS = GetMeshDS();
const SMDS_MeshNode* n4,
const SMDS_MeshNode* n5,
const SMDS_MeshNode* n6,
- const int id,
+ const smIdType id,
const bool force3d)
{
SMESHDS_Mesh * meshDS = GetMeshDS();
const SMDS_MeshNode* n14 = GetMediumNode( n1, n4, force3d, TopAbs_SOLID );
const SMDS_MeshNode* n25 = GetMediumNode( n2, n5, force3d, TopAbs_SOLID );
const SMDS_MeshNode* n36 = GetMediumNode( n3, n6, force3d, TopAbs_SOLID );
+ if ( myCreateBiQuadratic )
+ {
+ const SMDS_MeshNode* n1245 = GetCentralNode( n1,n2,n4,n5,n12,n25,n45,n14,force3d );
+ const SMDS_MeshNode* n1346 = GetCentralNode( n1,n3,n4,n6,n31,n36,n64,n14,force3d );
+ const SMDS_MeshNode* n2356 = GetCentralNode( n2,n3,n6,n5,n23,n36,n56,n25,force3d );
- if(id)
- elem = meshDS->AddVolumeWithID(n1, n2, n3, n4, n5, n6,
- n12, n23, n31, n45, n56, n64, n14, n25, n36, id);
+ if(id)
+ elem = meshDS->AddVolumeWithID(n1, n2, n3, n4, n5, n6,
+ n12, n23, n31, n45, n56, n64, n14, n25, n36,
+ n1245, n2356, n1346, id);
+ else
+ elem = meshDS->AddVolume(n1, n2, n3, n4, n5, n6,
+ n12, n23, n31, n45, n56, n64, n14, n25, n36,
+ n1245, n2356, n1346);
+ }
else
- elem = meshDS->AddVolume(n1, n2, n3, n4, n5, n6,
- n12, n23, n31, n45, n56, n64, n14, n25, n36);
+ {
+ if(id)
+ elem = meshDS->AddVolumeWithID(n1, n2, n3, n4, n5, n6,
+ n12, n23, n31, n45, n56, n64, n14, n25, n36, id);
+ else
+ elem = meshDS->AddVolume(n1, n2, n3, n4, n5, n6,
+ n12, n23, n31, n45, n56, n64, n14, n25, n36);
+ }
}
if ( mySetElemOnShape && myShapeID > 0 )
meshDS->SetMeshElementOnShape( elem, myShapeID );
const SMDS_MeshNode* n2,
const SMDS_MeshNode* n3,
const SMDS_MeshNode* n4,
- const int id,
+ const smIdType id,
const bool force3d)
{
SMESHDS_Mesh * meshDS = GetMeshDS();
const SMDS_MeshNode* n3,
const SMDS_MeshNode* n4,
const SMDS_MeshNode* n5,
- const int id,
+ const smIdType id,
const bool force3d)
{
SMDS_MeshVolume* elem = 0;
const SMDS_MeshNode* n6,
const SMDS_MeshNode* n7,
const SMDS_MeshNode* n8,
- const int id,
+ const smIdType id,
const bool force3d)
{
SMESHDS_Mesh * meshDS = GetMeshDS();
const SMDS_MeshNode* n10,
const SMDS_MeshNode* n11,
const SMDS_MeshNode* n12,
- const int id,
- bool force3d)
+ const smIdType id,
+ bool /*force3d*/)
{
SMESHDS_Mesh * meshDS = GetMeshDS();
SMDS_MeshVolume* elem = 0;
SMDS_MeshVolume*
SMESH_MesherHelper::AddPolyhedralVolume (const std::vector<const SMDS_MeshNode*>& nodes,
const std::vector<int>& quantities,
- const int id,
+ const smIdType id,
const bool force3d)
{
SMESHDS_Mesh * meshDS = GetMeshDS();
}
// get nodes on theBaseEdge sorted by param on edge and initialize theParam2ColumnMap with them
+ const SMDS_MeshNode* prevEndNodes[2] = { 0, 0 };
edge = theBaseSide.begin();
for ( int iE = 0; edge != theBaseSide.end(); ++edge, ++iE )
{
const double prevPar = theParam2ColumnMap.empty() ? 0 : theParam2ColumnMap.rbegin()->first;
for ( u_n = sortedBaseNN.begin(); u_n != sortedBaseNN.end(); u_n++ )
{
+ if ( u_n->second == prevEndNodes[0] ||
+ u_n->second == prevEndNodes[1] )
+ continue;
double par = prevPar + coeff * ( u_n->first - f );
TParam2ColumnMap::iterator u2nn =
theParam2ColumnMap.insert( theParam2ColumnMap.end(), make_pair( par, TNodeColumn()));
u2nn->second.push_back( u_n->second );
}
+ prevEndNodes[0] = sortedBaseNN.begin()->second;
+ prevEndNodes[1] = sortedBaseNN.rbegin()->second;
}
if ( theParam2ColumnMap.size() < 2 )
return false;
}
// nb rows of nodes
- size_t prevNbRows = theParam2ColumnMap.begin()->second.size(); // current, at least 1 here
+ size_t prevNbRows = theParam2ColumnMap.begin()->second.size(); // current, at least 1 here
size_t expectNbRows = faceSubMesh->NbElements() / ( theParam2ColumnMap.size()-1 ); // to be added
// fill theParam2ColumnMap column by column by passing from nodes on
theParam2ColumnMap.begin()->second.size() == prevNbRows + expectNbRows );
}
-namespace
+//================================================================================
+/*!
+ * \brief Return true if a node is at a corner of a 2D structured mesh of FACE
+ */
+//================================================================================
+
+bool SMESH_MesherHelper::IsCornerOfStructure( const SMDS_MeshNode* n,
+ const SMESHDS_SubMesh* faceSM,
+ SMESH_MesherHelper& faceAnalyser )
{
- //================================================================================
- /*!
- * \brief Return true if a node is at a corner of a 2D structured mesh of FACE
- */
- //================================================================================
+ int nbFacesInSM = 0;
+ if ( n ) {
+ SMDS_ElemIteratorPtr fIt = n->GetInverseElementIterator( SMDSAbs_Face );
+ while ( fIt->more() )
+ nbFacesInSM += faceSM->Contains( fIt->next() );
+ }
+ if ( nbFacesInSM == 1 )
+ return true;
- bool isCornerOfStructure( const SMDS_MeshNode* n,
- const SMESHDS_SubMesh* faceSM,
- SMESH_MesherHelper& faceAnalyser )
+ if ( nbFacesInSM == 2 && n->GetPosition()->GetTypeOfPosition() == SMDS_TOP_VERTEX )
{
- int nbFacesInSM = 0;
- if ( n ) {
- SMDS_ElemIteratorPtr fIt = n->GetInverseElementIterator( SMDSAbs_Face );
- while ( fIt->more() )
- nbFacesInSM += faceSM->Contains( fIt->next() );
- }
- if ( nbFacesInSM == 1 )
- return true;
-
- if ( nbFacesInSM == 2 && n->GetPosition()->GetTypeOfPosition() == SMDS_TOP_VERTEX )
- {
- return faceAnalyser.IsRealSeam( n->getshapeId() );
- }
- return false;
+ return faceAnalyser.IsRealSeam( n->getshapeId() );
}
+ return false;
}
//=======================================================================
int nbRemainEdges = nbEdgesInWires.front();
do {
TopoDS_Vertex V = IthVertex( 0, edges.front() );
- isCorner = isCornerOfStructure( SMESH_Algo::VertexNode( V, meshDS ),
+ isCorner = IsCornerOfStructure( SMESH_Algo::VertexNode( V, meshDS ),
fSM, faceAnalyser);
if ( !isCorner ) {
edges.splice( edges.end(), edges, edges.begin() );
for ( ; n != nodes.end(); ++n )
{
++nbEdges;
- if ( isCornerOfStructure( *n, fSM, faceAnalyser )) {
+ if ( IsCornerOfStructure( *n, fSM, faceAnalyser )) {
nbEdgesInSide.push_back( nbEdges );
nbEdges = 0;
}
//purpose : Return true if 2D mesh on FACE is ditorted
//=======================================================================
-bool SMESH_MesherHelper::IsDistorted2D( SMESH_subMesh* faceSM,
- bool checkUV)
+bool SMESH_MesherHelper::IsDistorted2D( SMESH_subMesh* faceSM,
+ bool checkUV,
+ SMESH_MesherHelper* faceHelper)
{
if ( !faceSM || faceSM->GetSubShape().ShapeType() != TopAbs_FACE )
return false;
bool haveBadFaces = false;
SMESH_MesherHelper helper( *faceSM->GetFather() );
+ if ( faceHelper )
+ helper.CopySubShapeInfo( *faceHelper );
helper.SetSubShape( faceSM->GetSubShape() );
const TopoDS_Face& F = TopoDS::Face( faceSM->GetSubShape() );
SMESHDS_SubMesh* smDS = helper.GetMeshDS()->MeshElements( F );
if ( !smDS || smDS->NbElements() == 0 ) return false;
+ bool subIdsValid = true; // shape ID of nodes is OK
+ if ( helper.HasSeam() )
+ {
+ // check if nodes are bound to seam edges
+ SMESH_subMeshIteratorPtr smIt = faceSM->getDependsOnIterator(/*includeSelf=*/false);
+ while ( smIt->more() && subIdsValid )
+ {
+ SMESH_subMesh* sm = smIt->next();
+ if ( helper.IsSeamShape( sm->GetId() ) && sm->IsEmpty() )
+ subIdsValid = false;
+ }
+ }
SMDS_ElemIteratorPtr faceIt = smDS->GetElements();
double prevArea = 0;
vector< const SMDS_MeshNode* > nodes;
for ( size_t i = 0; i < nodes.size(); ++n, ++i )
nodes[ i ] = *n;
- // avoid elems on degenarate shapes as UV on them can be wrong
+ // avoid elems on degenerate shapes as UV on them can be wrong
if ( helper.HasDegeneratedEdges() )
{
bool isOnDegen = false;
if ( isOnDegen )
continue;
}
- // prepare to getting UVs
+ // prepare for getting UVs
const SMDS_MeshNode* inFaceNode = 0;
if ( helper.HasSeam() ) {
for ( size_t i = 0; ( i < nodes.size() && !inFaceNode ); ++i )
if ( !helper.IsSeamShape( nodes[ i ]->getshapeId() ))
+ {
inFaceNode = nodes[ i ];
+ if ( !subIdsValid )
+ {
+ gp_XY uv = helper.GetNodeUV( F, inFaceNode );
+ if ( helper.IsOnSeam( uv ))
+ inFaceNode = NULL;
+ }
+ }
if ( !inFaceNode )
continue;
}
for ( size_t i = 0; i < nodes.size(); ++i )
uv[ i ] = helper.GetNodeUV( F, nodes[ i ], inFaceNode, toCheckUV );
+ if ( !subIdsValid ) // fix uv on seam
+ {
+ gp_XY uvInFace = helper.GetNodeUV( F, inFaceNode );
+ for ( size_t i = 0; i < uv.size(); ++i )
+ if ( helper.IsOnSeam( uv[i] ))
+ uv[i] = helper.getUVOnSeam( uv[i], uvInFace ).XY();
+ }
+
// compare orientation of triangles
double faceArea = 0;
for ( int iT = 0, nbT = nodes.size()-2; iT < nbT; ++iT )
* \brief Find out elements orientation on a geometrical face
* \param theFace - The face correctly oriented in the shape being meshed
* \retval bool - true if the face normal and the normal of first element
- * in the correspoding submesh point in different directions
+ * in the corresponding submesh point in different directions
*/
//================================================================================
if ( !aSubMeshDSFace )
return isReversed;
- // find an element on a bounday of theFace
+ // find an element on a boundary of theFace
SMDS_ElemIteratorPtr iteratorElem = aSubMeshDSFace->GetElements();
const SMDS_MeshNode* nn[2];
while ( iteratorElem->more() ) // loop on elements on theFace
TopoDS_Shape s0 = GetSubShapeByNode( nn[0], GetMeshDS() );
TopoDS_Shape s1 = GetSubShapeByNode( nn[1], GetMeshDS() );
TopoDS_Shape E = GetCommonAncestor( s0, s1, *myMesh, TopAbs_EDGE );
- if ( !E.IsNull() && !s0.IsSame( s1 ))
+ if ( !E.IsNull() && !s0.IsSame( s1 ) && E.Orientation() != TopAbs_INTERNAL )
{
// is E seam edge?
int nb = 0;
bool ok = true;
double u0 = GetNodeU( TopoDS::Edge( E ), nn[0], nn[1], &ok );
double u1 = GetNodeU( TopoDS::Edge( E ), nn[1], nn[0], &ok );
- // check that the 2 nodes are connected with a segment (IPAL53055)
- const SMDS_MeshElement* seg;
- if ( SMESHDS_SubMesh* sm = GetMeshDS()->MeshElements( E ))
- if (( sm->NbElements() > 0 ) &&
- ( seg = GetMeshDS()->FindEdge( nn[0], nn[1] )))
- ok = sm->Contains( seg );
+ if ( ok )
+ {
+ // check that the 2 nodes are connected with a segment (IPAL53055)
+ ok = false;
+ const SMDS_MeshElement* seg;
+ if ( SMESHDS_SubMesh* sm = GetMeshDS()->MeshElements( E ))
+ if (( sm->NbElements() > 0 ) &&
+ ( seg = GetMeshDS()->FindEdge( nn[0], nn[1] )))
+ ok = sm->Contains( seg );
+ }
if ( ok )
{
isReversed = ( u0 > u1 );
//=======================================================================
//function : IsSubShape
-//purpose :
+//purpose :
//=======================================================================
bool SMESH_MesherHelper::IsSubShape( const TopoDS_Shape& shape,
* of the FACE normal
* \return double - the angle (between -Pi and Pi), negative if the angle is concave,
* 1e100 in case of failure
- * \waring Care about order of the EDGEs and their orientation to be as they are
+ * \warning Care about order of the EDGEs and their orientation to be as they are
* within the FACE! Don't pass degenerated EDGEs neither!
*/
//================================================================================
SMESH_MesherHelper:: MType SMESH_MesherHelper::IsQuadraticMesh()
{
- int NbAllEdgsAndFaces=0;
- int NbQuadFacesAndEdgs=0;
- int NbFacesAndEdges=0;
+ smIdType NbAllEdgsAndFaces=0;
+ smIdType NbQuadFacesAndEdgs=0;
+ smIdType NbFacesAndEdges=0;
//All faces and edges
NbAllEdgsAndFaces = myMesh->NbEdges() + myMesh->NbFaces();
if ( NbAllEdgsAndFaces == 0 )
return fabs(param-myPar1[i]) < fabs(param-myPar2[i]) ? myPar2[i] : myPar1[i];
}
+//=======================================================================
+//function : NbRealSeam
+//purpose : Return a number of real seam edges in the shape set through
+// IsQuadraticSubMesh() or SetSubShape(). A real seam edge encounters twice in a wire
+//=======================================================================
+
+size_t SMESH_MesherHelper::NbRealSeam() const
+{
+ size_t nb = 0;
+
+ std::set< int >::const_iterator id = mySeamShapeIds.begin();
+ for ( ; id != mySeamShapeIds.end(); ++id )
+ if ( *id < 0 ) ++nb;
+ else break;
+
+ return nb;
+}
+
+//=======================================================================
+//function : IsOnSeam
+//purpose : Check if UV is on seam. Return 0 if not, 1 for U seam, 2 for V seam
+//=======================================================================
+
+int SMESH_MesherHelper::IsOnSeam(const gp_XY& uv) const
+{
+ for ( int i = U_periodic; i <= V_periodic ; ++i )
+ if ( myParIndex & i )
+ {
+ double p = uv.Coord( i );
+ double tol = ( myPar2[i-1] - myPar1[i-1] ) / 100.;
+ if ( Abs( p - myPar1[i-1] ) < tol ||
+ Abs( p - myPar2[i-1] ) < tol )
+ return i;
+ }
+ return 0;
+}
+
namespace {
//=======================================================================
TopTools_ListIteratorOfListOfShape _ancIter;
TopAbs_ShapeEnum _type;
TopTools_MapOfShape _encountered;
- TAncestorsIterator( const TopTools_ListOfShape& ancestors, TopAbs_ShapeEnum type)
+ TopTools_IndexedMapOfShape _allowed;
+ TAncestorsIterator( const TopTools_ListOfShape& ancestors,
+ TopAbs_ShapeEnum type,
+ const TopoDS_Shape* container/* = 0*/)
: _ancIter( ancestors ), _type( type )
{
+ if ( container && !container->IsNull() )
+ TopExp::MapShapes( *container, type, _allowed);
if ( _ancIter.More() ) {
- if ( _ancIter.Value().ShapeType() != _type ) next();
+ if ( !isCurrentAllowed() ) next();
else _encountered.Add( _ancIter.Value() );
}
}
const TopoDS_Shape* s = _ancIter.More() ? & _ancIter.Value() : 0;
if ( _ancIter.More() )
for ( _ancIter.Next(); _ancIter.More(); _ancIter.Next())
- if ( _ancIter.Value().ShapeType() == _type && _encountered.Add( _ancIter.Value() ))
+ if ( isCurrentAllowed() && _encountered.Add( _ancIter.Value() ))
break;
return s;
}
+ bool isCurrentAllowed()
+ {
+ return (( _ancIter.Value().ShapeType() == _type ) &&
+ ( _allowed.IsEmpty() || _allowed.Contains( _ancIter.Value() )));
+ }
};
} // namespace
//=======================================================================
/*!
- * \brief Return iterator on ancestors of the given type
+ * \brief Return iterator on ancestors of the given type, included into a container shape
*/
//=======================================================================
PShapeIteratorPtr SMESH_MesherHelper::GetAncestors(const TopoDS_Shape& shape,
const SMESH_Mesh& mesh,
- TopAbs_ShapeEnum ancestorType)
+ TopAbs_ShapeEnum ancestorType,
+ const TopoDS_Shape* container)
{
- return PShapeIteratorPtr( new TAncestorsIterator( mesh.GetAncestors(shape), ancestorType));
+ return PShapeIteratorPtr
+ ( new TAncestorsIterator( mesh.GetAncestors(shape), ancestorType, container));
}
//=======================================================================
//================================================================================
/*!
- * \brief Construct QFace from QLinks
+ * \brief Construct QFace from QLinks
*/
//================================================================================
gp_Vec v1( XYZ( l1->node2()), XYZ( l1->node1()));
gp_Vec v2( XYZ( l2->node1()), XYZ( l2->node2()));
if ( l1->node1() != l2->node1() && l1->node2() != l2->node2() )
- v1.Reverse();
+ v1.Reverse();
_normal += v1 ^ v2;
}
double normSqSize = _normal.SquareMagnitude();
#ifdef _DEBUG_
_face = face;
+#else
+ (void)face; // unused in release mode
#endif
}
//================================================================================
* \brief Make up a chain of links
* \param iSide - link to add first
* \param chain - chain to fill in
- * \param pos - postion of medium nodes the links should have
+ * \param pos - position of medium nodes the links should have
* \param error - out, specifies what is wrong
* \retval bool - false if valid chain can't be built; "valid" means that links
* of the chain belongs to rectangles bounding hexahedrons
if ( _sideIsAdded[ iSide ]) // already in chain
return true;
- if ( _sides.size() != 4 ) { // triangle - visit all my continous faces
+ if ( _sides.size() != 4 ) { // triangle - visit all my continuous faces
MSGBEG( *this );
TLinkSet links;
list< const QFace* > faces( 1, this );
if ( link->MediumPos() >= pos ) {
int nbLinkFaces = link->_faces.size();
if ( nbLinkFaces == 4 || (/*nbLinkFaces < 4 && */link->OnBoundary())) {
- // hexahedral mesh or boundary quadrangles - goto a continous face
+ // hexahedral mesh or boundary quadrangles - goto a continuous face
if ( const QFace* f = link->GetContinuesFace( this ))
if ( f->_sides.size() == 4 )
return f->GetLinkChain( *chLink, chain, pos, error );
* \brief Move medium node of theLink according to its distance from boundary
* \param theLink - link to fix
* \param theRefVec - movement of boundary
- * \param theLinks - all adjacent links of continous triangles
+ * \param theLinks - all adjacent links of continuous triangles
* \param theFaceHelper - helper is not used so far
* \param thePrevLen - distance from the boundary
* \param theStep - number of steps till movement propagation limit
*/
//================================================================================
- bool QFace::IsSpoiled(const QLink* bentLink ) const
- {
- // code is valid for convex faces only
- gp_XYZ gc(0,0,0);
- for ( TIDSortedNodeSet::const_iterator n = begin(); n!=end(); ++n)
- gc += XYZ( *n ) / size();
- for (unsigned i = 0; i < _sides.size(); ++i )
- {
- if ( _sides[i] == bentLink ) continue;
- gp_Vec linkNorm = _normal ^ gp_Vec( XYZ(_sides[i]->node1()), XYZ(_sides[i]->node2()));
- gp_Vec vecOut( gc, _sides[i]->MiddlePnt() );
- if ( linkNorm * vecOut < 0 )
- linkNorm.Reverse();
- double mag2 = linkNorm.SquareMagnitude();
- if ( mag2 > numeric_limits<double>::min() )
- linkNorm /= sqrt( mag2 );
- gp_Vec vecBent ( _sides[i]->MiddlePnt(), bentLink->MediumPnt());
- gp_Vec vecStraight( _sides[i]->MiddlePnt(), bentLink->MiddlePnt());
- if ( vecBent * linkNorm > -0.1*vecStraight.Magnitude() )
- return true;
- }
- return false;
-
- }
+ // bool QFace::IsSpoiled(const QLink* bentLink ) const
+ // {
+ // // code is valid for convex faces only
+ // gp_XYZ gc(0,0,0);
+ // for ( TIDSortedNodeSet::const_iterator n = begin(); n != end(); ++n )
+ // gc += XYZ( *n ) / double( size() );
+ // for ( size_t i = 0; i < _sides.size(); ++i )
+ // {
+ // if ( _sides[i] == bentLink ) continue;
+ // gp_Vec linkNorm = _normal ^ gp_Vec( XYZ(_sides[i]->node1()), XYZ(_sides[i]->node2()));
+ // gp_Vec vecOut( gc, _sides[i]->MiddlePnt() );
+ // if ( linkNorm * vecOut < 0 )
+ // linkNorm.Reverse();
+ // double mag2 = linkNorm.SquareMagnitude();
+ // if ( mag2 > numeric_limits<double>::min() )
+ // linkNorm /= sqrt( mag2 );
+ // gp_Vec vecBent ( _sides[i]->MiddlePnt(), bentLink->MediumPnt());
+ // gp_Vec vecStraight( _sides[i]->MiddlePnt(), bentLink->MiddlePnt());
+ // if ( vecBent * linkNorm > -0.1*vecStraight.Magnitude() )
+ // return true;
+ // }
+ // return false;
+
+ // }
//================================================================================
/*!
- * \brief Find pairs of continues faces
+ * \brief Find pairs of continues faces
*/
//================================================================================
// | Between _faces of link x2 two vertical faces are continues
// x1----x2-----x3 and two horizontal faces are continues. We set vertical faces
// | to _faces[0] and _faces[1] and horizontal faces to
- // v2 | v3 _faces[2] and _faces[3] (or vise versa).
+ // v2 | v3 _faces[2] and _faces[3] (or vice versa).
// x4
if ( _faces.empty() )
vector< TChain> & resultChains,
SMDS_TypeOfPosition pos )
{
- // put links in the set and evalute number of result chains by number of boundary links
+ // put links in the set and evaluate number of result chains by number of boundary links
TLinkSet linkSet;
size_t nbBndLinks = 0;
for ( TChain::iterator lnk = allLinks.begin(); lnk != allLinks.end(); ++lnk ) {
TopoDS_Shape shape = theHelper.GetSubShape().Oriented( TopAbs_FORWARD );
if ( shape.IsNull() ) return;
- if ( !theError ) theError = SMESH_ComputeError::New();
-
+ if ( !dynamic_cast<SMESH_BadInputElements*>( theError.get() ))
+ {
+ if ( !theError )
+ theError.reset( new SMESH_BadInputElements( meshDS ));
+ else
+ theError.reset( new SMESH_BadInputElements( meshDS,
+ theError->myName,
+ theError->myComment,
+ theError->myAlgo));
+ }
gp_XYZ faceNorm;
if ( shape.ShapeType() == TopAbs_FACE ) // 2D
if ( curvNorm * D2 > 0 )
continue; // convex edge
}
- catch ( Standard_Failure )
+ catch ( Standard_Failure& )
{
continue;
}
const SMDS_MeshElement* f = faceIt->next();
if ( !faceSM->Contains( f ) ||
f->NbNodes() < 6 || // check quadratic triangles only
+ f->NbNodes() > 7 ||
!checkedFaces.insert( f ).second )
continue;
gp_XYZ pMid3D = 0.5 * ( pN0 + SMESH_TNodeXYZ( nOnEdge[1] ));
meshDS->MoveNode( n, pMid3D.X(), pMid3D.Y(), pMid3D.Z() );
MSG( "move OUT of face " << n );
- theError->myBadElements.push_back( f );
+ static_cast<SMESH_BadInputElements*>( theError.get() )->add( f );
}
}
}
}
}
- if ( !theError->myBadElements.empty() )
+ if ( theError->HasBadElems() )
theError->myName = EDITERR_NO_MEDIUM_ON_GEOM;
return;
if ( concaveU || concaveV )
concaveFaces.push_back( face );
}
- catch ( Standard_Failure )
+ catch ( Standard_Failure& )
{
concaveFaces.push_back( face );
}
< const SMDS_MeshElement*, vector< SMDS_ElemIteratorPtr > > TIterOnIter;
SMDS_ElemIteratorPtr faceIter( new TIterOnIter( faceIterVec ));
- // a seacher to check if a volume is close to a concave face
- std::auto_ptr< SMESH_ElementSearcher > faceSearcher
+ // search to check if a volume is close to a concave face
+ SMESHUtils::Deleter< SMESH_ElementSearcher > faceSearcher
( SMESH_MeshAlgos::GetElementSearcher( *theHelper.GetMeshDS(), faceIter ));
// classifier
gp_Pnt pMedium = SMESH_TNodeXYZ( linkIt->second );
double hMedium = faceNorm * gp_Vec( pOnFace0, pMedium ).XYZ();
double hVol = faceNorm * gp_Vec( pOnFace0, pInSolid ).XYZ();
- isDistorted = ( Abs( hMedium ) > Abs( hVol * 0.5 ));
+ if ( Abs( hMedium ) > Abs( hVol * 0.75 ))
+ {
+ SMESH_TNodeXYZ pI( nOnFace[i]), pJ( nOnFace[j]);
+ double angle = gp_Vec( pI, pMedium ).Angle( gp_Vec( pI, pJ ));
+ isDistorted = ( angle > M_PI / 20 );
+ }
}
}
}
MSG( "move OUT of solid " << nMedium );
}
}
- theError->myBadElements.push_back( vol );
+ static_cast<SMESH_BadInputElements*>( theError.get() )->add( vol );
}
} // loop on volumes sharing a node on FACE
} // loop on nodes on FACE
} // loop on FACEs of a SOLID
- if ( !theError->myBadElements.empty() )
+ if ( theError->HasBadElems() )
theError->myName = EDITERR_NO_MEDIUM_ON_GEOM;
} // 3D case
}
* \brief Move medium nodes of faces and volumes to fix distorted elements
* \param error - container of fixed distorted elements
* \param volumeOnly - to fix nodes on faces or not, if the shape is solid
- *
+ *
* Issue 0020307: EDF 992 SMESH : Linea/Quadratic with Medium Node on Geometry
*/
//=======================================================================
void SMESH_MesherHelper::FixQuadraticElements(SMESH_ComputeErrorPtr& compError,
bool volumeOnly)
{
+ //MESSAGE("FixQuadraticElements " << volumeOnly);
// setenv NO_FixQuadraticElements to know if FixQuadraticElements() is guilty of bad conversion
if ( getenv("NO_FixQuadraticElements") )
return;
SMESH_MesherHelper h(*myMesh);
h.SetSubShape( s.Current() );
h.ToFixNodeParameters(true);
- h.FixQuadraticElements( compError, false );
+ try {
+ OCC_CATCH_SIGNALS;
+ h.FixQuadraticElements( compError, false );
+ }
+ catch(...) {
+ if ( compError && compError->myComment.empty() )
+ compError->myComment = "SMESH_MesherHelper::FixQuadraticElements() failed";
+ }
}
}
// fix nodes on geom faces
#ifdef _DEBUG_
int nbfaces = nbSolids;
- nbfaces = faces.Extent(); /*avoid "unused varianbles": */ nbfaces++, nbfaces--;
+ nbfaces = faces.Extent(); /*avoid "unused varianbles": */ nbfaces++, nbfaces--;
#endif
for ( TopTools_MapIteratorOfMapOfShape fIt( faces ); fIt.More(); fIt.Next() ) {
+ MESSAGE("FIX FACE " << nbfaces-- << " #" << GetMeshDS()->ShapeToIndex(fIt.Key()));
MSG("FIX FACE " << nbfaces-- << " #" << GetMeshDS()->ShapeToIndex(fIt.Key()));
SMESH_MesherHelper h(*myMesh);
h.SetSubShape( fIt.Key() );
h.ToFixNodeParameters(true);
- h.FixQuadraticElements( compError, true);
+ try {
+ OCC_CATCH_SIGNALS;
+ h.FixQuadraticElements( compError, true);
+ }
+ catch(...) {
+ if ( compError && compError->myComment.empty() )
+ compError->myComment = "SMESH_MesherHelper::FixQuadraticElements() failed";
+ }
}
//perf_print_all_meters(1);
if ( compError && compError->myName == EDITERR_NO_MEDIUM_ON_GEOM )
MSG("Internal chain - ignore");
continue;
}
- // mesure chain length and compute link position along the chain
+ // measure chain length and compute link position along the chain
double chainLen = 0;
vector< double > linkPos;
TChain savedChain; // backup
while ( len < numeric_limits<double>::min() ) { // remove degenerated link
if ( savedChain.empty() ) savedChain = chain;
link1 = chain.erase( link1 );
- if ( link1 == chain.end() )
+ if ( link1 == chain.end() ) {
+ link1 = --chain.end();
break;
+ }
len = ((*link0)->MiddlePnt() - (*link1)->MiddlePnt()).Modulus();
}
chainLen += len;
linkPos.push_back( chainLen );
}
}
+ if ( chain.begin() == --chain.end() ) // chain.size() == 1
+ continue;
+
gp_Vec move0 = chain.front()->_nodeMove;
gp_Vec move1 = chain.back ()->_nodeMove;
try {
gp_Vec x = x01.Normalized() + x12.Normalized();
trsf.SetTransformation( gp_Ax3( gp::Origin(), link1->Normal(), x), gp_Ax3() );
- } catch ( Standard_Failure ) {
+ } catch ( Standard_Failure& ) {
trsf.Invert();
}
move.Transform(trsf);
gp_XY newUV = ApplyIn2D( s, oldUV, gp_XY( move.X(),move.Y()), gp_XY_Added );
gp_Pnt newPnt = s->Value( newUV.X(), newUV.Y());
move = gp_Vec( XYZ((*link1)->_mediumNode), newPnt.Transformed(loc) );
- if ( SMDS_FacePosition* nPos =
- dynamic_cast< SMDS_FacePosition* >((*link1)->_mediumNode->GetPosition()))
+ if ( SMDS_FacePositionPtr nPos = (*link1)->_mediumNode->GetPosition())
nPos->SetParameters( newUV.X(), newUV.Y() );
#ifdef _DEBUG_
if ( (XYZ((*link1)->node1()) - XYZ((*link1)->node2())).SquareModulus() <
// 4. Move nodes
// -------------
- TIDSortedElemSet biQuadQuas, biQuadTris, triQuadHexa;
+ TIDSortedElemSet biQuadQuas, biQuadTris, triQuadHexa, biQuadPenta;
const bool toFixCentralNodes = ( myMesh->NbBiQuadQuadrangles() +
myMesh->NbBiQuadTriangles() +
- myMesh->NbTriQuadraticHexas() );
+ myMesh->NbTriQuadraticHexas() +
+ myMesh->NbBiQuadPrisms());
double distXYZ[4];
faceHlp.ToFixNodeParameters( true );
case SMDSEntity_BiQuad_Quadrangle: biQuadQuas.insert( e ); break;
case SMDSEntity_BiQuad_Triangle: biQuadTris.insert( e ); break;
case SMDSEntity_TriQuad_Hexa: triQuadHexa.insert( e ); break;
+ case SMDSEntity_BiQuad_Penta: biQuadPenta.insert( e ); break;
default:;
}
}
nCenterCoords.X(), nCenterCoords.Y(), nCenterCoords.Z());
}
}
-#ifdef _DEBUG_
- // avoid warning: defined but not used operator<<()
- SMESH_Comment() << *links.begin() << *faces.begin();
-#endif
+ // treat tri-quadratic hexahedra
+ {
+ SMDS_VolumeTool volExp;
+ TIDSortedElemSet::iterator pentIt = biQuadPenta.begin();
+ for ( ; pentIt != biQuadPenta.end(); ++pentIt )
+ {
+ MESSAGE("---");
+ volExp.Set( *pentIt, /*ignoreCentralNodes=*/false );
+ }
+ }
+
+ if ( false )
+ // avoid warning: defined but not used operator<<()
+ SMESH_Comment() << *links.begin() << *faces.begin();
+
+ return;
}
//================================================================================