-// Copyright (C) 2007-2013 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2014 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
// This library is free software; you can redistribute it and/or
// modify it under the terms of the GNU Lesser General Public
// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// version 2.1 of the License, or (at your option) any later version.
//
// This library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
}
else
{
- const map<int,SMESHDS_SubMesh*>& id2sm = GetMeshDS()->SubMeshes();
- map<int,SMESHDS_SubMesh*>::const_iterator id_sm = id2sm.begin();
- for ( ; id_sm != id2sm.end(); ++id_sm )
- if ( id_sm->second->Contains( theElem ))
- return id_sm->first;
+ SMESHDS_SubMeshIteratorPtr smIt = GetMeshDS()->SubMeshes();
+ while ( const SMESHDS_SubMesh* sm = smIt->next() )
+ if ( sm->Contains( theElem ))
+ return sm->GetID();
}
- //MESSAGE ("::FindShape() - SHAPE NOT FOUND")
return 0;
}
// put nodes in array and find out indices of the same ones
const SMDS_MeshNode* aNodes [6];
- int sameInd [] = { 0, 0, 0, 0, 0, 0 };
+ int sameInd [] = { -1, -1, -1, -1, -1, -1 };
int i = 0;
SMDS_ElemIteratorPtr it = theTria1->nodesIterator();
while ( it->more() ) {
}
// find indices of 1,2 and of A,B in theTria1
- int iA = 0, iB = 0, i1 = 0, i2 = 0;
+ int iA = -1, iB = 0, i1 = 0, i2 = 0;
for ( i = 0; i < 6; i++ ) {
- if ( sameInd [ i ] == 0 ) {
+ if ( sameInd [ i ] == -1 ) {
if ( i < 3 ) i1 = i;
else i2 = i;
}
else if (i < 3) {
- if ( iA ) iB = i;
- else iA = i;
+ if ( iA >= 0) iB = i;
+ else iA = i;
}
}
// nodes 1 and 2 should not be the same
avoidSet.clear();
avoidSet.insert(theFace);
- NLink link( theFace->GetNode( 0 ), 0 );
+ NLink link( theFace->GetNode( 0 ), (SMDS_MeshNode *) 0 );
const int nbNodes = theFace->NbCornerNodes();
for ( int i = 0; i < nbNodes; ++i ) // loop on links of theFace
const int* thePentaTo3[6] = { thePentaTo3_1, thePentaTo3_2, thePentaTo3_3,
thePentaTo3_4, thePentaTo3_5, thePentaTo3_6 };
+ // Methods of splitting hexahedron into prisms
+
+ const int theHexTo4Prisms_BT[6*4+1] = // bottom-top
+ {
+ 0, 1, 8, 4, 5, 9, 1, 2, 8, 5, 6, 9, 2, 3, 8, 6, 7, 9, 3, 0, 8, 7, 4, 9, -1
+ };
+ const int theHexTo4Prisms_LR[6*4+1] = // left-right
+ {
+ 1, 0, 8, 2, 3, 9, 0, 4, 8, 3, 7, 9, 4, 5, 8, 7, 6, 9, 5, 1, 8, 6, 2, 9, -1
+ };
+ const int theHexTo4Prisms_FB[6*4+1] = // front-back
+ {
+ 0, 3, 9, 1, 2, 8, 3, 7, 9, 2, 6, 8, 7, 4, 9, 6, 5, 8, 4, 0, 9, 5, 1, 8, -1
+ };
+
+ const int theHexTo2Prisms_BT_1[6*2+1] =
+ {
+ 0, 1, 3, 4, 5, 7, 1, 2, 3, 5, 6, 7, -1
+ };
+ const int theHexTo2Prisms_BT_2[6*2+1] =
+ {
+ 0, 1, 2, 4, 5, 6, 0, 2, 3, 4, 6, 7, -1
+ };
+ const int* theHexTo2Prisms_BT[2] = { theHexTo2Prisms_BT_1, theHexTo2Prisms_BT_2 };
+
+ const int theHexTo2Prisms_LR_1[6*2+1] =
+ {
+ 1, 0, 4, 2, 3, 7, 1, 4, 5, 2, 7, 6, -1
+ };
+ const int theHexTo2Prisms_LR_2[6*2+1] =
+ {
+ 1, 0, 4, 2, 3, 7, 1, 4, 5, 2, 7, 6, -1
+ };
+ const int* theHexTo2Prisms_LR[2] = { theHexTo2Prisms_LR_1, theHexTo2Prisms_LR_2 };
+
+ const int theHexTo2Prisms_FB_1[6*2+1] =
+ {
+ 0, 3, 4, 1, 2, 5, 3, 7, 4, 2, 6, 5, -1
+ };
+ const int theHexTo2Prisms_FB_2[6*2+1] =
+ {
+ 0, 3, 7, 1, 2, 7, 0, 7, 4, 1, 6, 5, -1
+ };
+ const int* theHexTo2Prisms_FB[2] = { theHexTo2Prisms_FB_1, theHexTo2Prisms_FB_2 };
+
+
struct TTriangleFacet //!< stores indices of three nodes of tetra facet
{
int _n1, _n2, _n3;
TTriangleFacet(int n1, int n2, int n3): _n1(n1), _n2(n2), _n3(n3) {}
bool contains(int n) const { return ( n == _n1 || n == _n2 || n == _n3 ); }
- bool hasAdjacentTetra( const SMDS_MeshElement* elem ) const;
+ bool hasAdjacentVol( const SMDS_MeshElement* elem,
+ const SMDSAbs_GeometryType geom = SMDSGeom_TETRA) const;
};
struct TSplitMethod
{
- int _nbTetra;
+ int _nbSplits;
+ int _nbCorners;
const int* _connectivity; //!< foursomes of tetra connectivy finished by -1
bool _baryNode; //!< additional node is to be created at cell barycenter
bool _ownConn; //!< to delete _connectivity in destructor
map<int, const SMDS_MeshNode*> _faceBaryNode; //!< map face index to node at BC of face
TSplitMethod( int nbTet=0, const int* conn=0, bool addNode=false)
- : _nbTetra(nbTet), _connectivity(conn), _baryNode(addNode), _ownConn(false) {}
+ : _nbSplits(nbTet), _nbCorners(4), _connectivity(conn), _baryNode(addNode), _ownConn(false) {}
~TSplitMethod() { if ( _ownConn ) delete [] _connectivity; _connectivity = 0; }
bool hasFacet( const TTriangleFacet& facet ) const
{
- const int* tetConn = _connectivity;
- for ( ; tetConn[0] >= 0; tetConn += 4 )
- if (( facet.contains( tetConn[0] ) +
- facet.contains( tetConn[1] ) +
- facet.contains( tetConn[2] ) +
- facet.contains( tetConn[3] )) == 3 )
- return true;
+ if ( _nbCorners == 4 )
+ {
+ const int* tetConn = _connectivity;
+ for ( ; tetConn[0] >= 0; tetConn += 4 )
+ if (( facet.contains( tetConn[0] ) +
+ facet.contains( tetConn[1] ) +
+ facet.contains( tetConn[2] ) +
+ facet.contains( tetConn[3] )) == 3 )
+ return true;
+ }
+ else // prism, _nbCorners == 6
+ {
+ const int* prismConn = _connectivity;
+ for ( ; prismConn[0] >= 0; prismConn += 6 )
+ {
+ if (( facet.contains( prismConn[0] ) &&
+ facet.contains( prismConn[1] ) &&
+ facet.contains( prismConn[2] ))
+ ||
+ ( facet.contains( prismConn[3] ) &&
+ facet.contains( prismConn[4] ) &&
+ facet.contains( prismConn[5] )))
+ return true;
+ }
+ }
return false;
}
};
//=======================================================================
/*!
- * \brief return TSplitMethod for the given element
+ * \brief return TSplitMethod for the given element to split into tetrahedra
*/
//=======================================================================
- TSplitMethod getSplitMethod( SMDS_VolumeTool& vol, const int theMethodFlags)
+ TSplitMethod getTetraSplitMethod( SMDS_VolumeTool& vol, const int theMethodFlags)
{
const int iQ = vol.Element()->IsQuadratic() ? 2 : 1;
{
TTriangleFacet t012( nInd[0*iQ], nInd[1*iQ], nInd[2*iQ] );
TTriangleFacet t123( nInd[1*iQ], nInd[2*iQ], nInd[3*iQ] );
- if ( t012.hasAdjacentTetra( vol.Element() )) triaSplits.push_back( t012 );
- else if ( t123.hasAdjacentTetra( vol.Element() )) triaSplits.push_back( t123 );
+ if ( t012.hasAdjacentVol( vol.Element() )) triaSplits.push_back( t012 );
+ else if ( t123.hasAdjacentVol( vol.Element() )) triaSplits.push_back( t123 );
}
else
{
TTriangleFacet t023( nInd[ iQ * ( iCom )],
nInd[ iQ * ( (iCom+2)%nbNodes )],
nInd[ iQ * ( (iCom+3)%nbNodes )]);
- if ( t012.hasAdjacentTetra( vol.Element() ) && t023.hasAdjacentTetra( vol.Element() ))
+ if ( t012.hasAdjacentVol( vol.Element() ) && t023.hasAdjacentVol( vol.Element() ))
{
triaSplits.push_back( t012 );
triaSplits.push_back( t023 );
default:
nbVariants = 0;
}
- for ( int variant = 0; variant < nbVariants && method._nbTetra == 0; ++variant )
+ for ( int variant = 0; variant < nbVariants && method._nbSplits == 0; ++variant )
{
// check method compliancy with adjacent tetras,
// all found splits must be among facets of tetras described by this method
method = TSplitMethod( nbTet, connVariants[variant] );
- if ( hasAdjacentSplits && method._nbTetra > 0 )
+ if ( hasAdjacentSplits && method._nbSplits > 0 )
{
bool facetCreated = true;
for ( int iF = 0; facetCreated && iF < triaSplitsByFace.size(); ++iF )
}
}
}
- if ( method._nbTetra < 1 )
+ if ( method._nbSplits < 1 )
{
// No standard method is applicable, use a generic solution:
// each facet of a volume is split into triangles and
connectivity[ connSize++ ] = baryCenInd;
}
}
- method._nbTetra += nbTet;
+ method._nbSplits += nbTet;
} // loop on volume faces
return method;
}
+ //=======================================================================
+ /*!
+ * \brief return TSplitMethod to split haxhedron into prisms
+ */
+ //=======================================================================
+
+ TSplitMethod getPrismSplitMethod( SMDS_VolumeTool& vol,
+ const int methodFlags,
+ const int facetToSplit)
+ {
+ // order of facets in HEX according to SMDS_VolumeTool::Hexa_F :
+ // B, T, L, B, R, F
+ const int iF = ( facetToSplit < 2 ) ? 0 : 1 + ( facetToSplit-2 ) % 2; // [0,1,2]
+
+ if ( methodFlags == SMESH_MeshEditor::HEXA_TO_4_PRISMS )
+ {
+ static TSplitMethod to4methods[4]; // order BT, LR, FB
+ if ( to4methods[iF]._nbSplits == 0 )
+ {
+ switch ( iF ) {
+ case 0:
+ to4methods[iF]._connectivity = theHexTo4Prisms_BT;
+ to4methods[iF]._faceBaryNode[ 0 ] = 0;
+ to4methods[iF]._faceBaryNode[ 1 ] = 0;
+ break;
+ case 1:
+ to4methods[iF]._connectivity = theHexTo4Prisms_LR;
+ to4methods[iF]._faceBaryNode[ 2 ] = 0;
+ to4methods[iF]._faceBaryNode[ 4 ] = 0;
+ break;
+ case 2:
+ to4methods[iF]._connectivity = theHexTo4Prisms_FB;
+ to4methods[iF]._faceBaryNode[ 3 ] = 0;
+ to4methods[iF]._faceBaryNode[ 5 ] = 0;
+ break;
+ default: return to4methods[3];
+ }
+ to4methods[iF]._nbSplits = 4;
+ to4methods[iF]._nbCorners = 6;
+ }
+ return to4methods[iF];
+ }
+ // else if ( methodFlags == HEXA_TO_2_PRISMS )
+
+ TSplitMethod method;
+
+ const int iQ = vol.Element()->IsQuadratic() ? 2 : 1;
+
+ const int nbVariants = 2, nbSplits = 2;
+ const int** connVariants = 0;
+ switch ( iF ) {
+ case 0: connVariants = theHexTo2Prisms_BT; break;
+ case 1: connVariants = theHexTo2Prisms_LR; break;
+ case 2: connVariants = theHexTo2Prisms_FB; break;
+ default: return method;
+ }
+
+ // look for prisms adjacent via facetToSplit and an opposite one
+ for ( int is2nd = 0; is2nd < 2; ++is2nd )
+ {
+ int iFacet = is2nd ? vol.GetOppFaceIndexOfHex( facetToSplit ) : facetToSplit;
+ int nbNodes = vol.NbFaceNodes( iFacet ) / iQ;
+ if ( nbNodes != 4 ) return method;
+
+ const int* nInd = vol.GetFaceNodesIndices( iFacet );
+ TTriangleFacet t012( nInd[0*iQ], nInd[1*iQ], nInd[2*iQ] );
+ TTriangleFacet t123( nInd[1*iQ], nInd[2*iQ], nInd[3*iQ] );
+ TTriangleFacet* t;
+ if ( t012.hasAdjacentVol( vol.Element(), SMDSGeom_PENTA ))
+ t = &t012;
+ else if ( t123.hasAdjacentVol( vol.Element(), SMDSGeom_PENTA ))
+ t = &t123;
+ else
+ continue;
+
+ // there are adjacent prism
+ for ( int variant = 0; variant < nbVariants; ++variant )
+ {
+ // check method compliancy with adjacent prisms,
+ // the found prism facets must be among facets of prisms described by current method
+ method._nbSplits = nbSplits;
+ method._nbCorners = 6;
+ method._connectivity = connVariants[ variant ];
+ if ( method.hasFacet( *t ))
+ return method;
+ }
+ }
+
+ // No adjacent prisms. Select a variant with a best aspect ratio.
+
+ double badness[2] = { 0, 0 };
+ static SMESH::Controls::NumericalFunctorPtr aspectRatio( new SMESH::Controls::AspectRatio);
+ const SMDS_MeshNode** nodes = vol.GetNodes();
+ for ( int variant = 0; variant < nbVariants; ++variant )
+ for ( int is2nd = 0; is2nd < 2; ++is2nd )
+ {
+ int iFacet = is2nd ? vol.GetOppFaceIndexOfHex( facetToSplit ) : facetToSplit;
+ const int* nInd = vol.GetFaceNodesIndices( iFacet );
+
+ method._connectivity = connVariants[ variant ];
+ TTriangleFacet t012( nInd[0*iQ], nInd[1*iQ], nInd[2*iQ] );
+ TTriangleFacet t123( nInd[1*iQ], nInd[2*iQ], nInd[3*iQ] );
+ TTriangleFacet* t = ( method.hasFacet( t012 )) ? & t012 : & t123;
+
+ SMDS_FaceOfNodes tria ( nodes[ t->_n1 ],
+ nodes[ t->_n2 ],
+ nodes[ t->_n3 ] );
+ badness[ variant ] += getBadRate( &tria, aspectRatio );
+ }
+ const int iBetter = ( badness[1] < badness[0] && badness[0]-badness[1] > 0.1 * badness[0] );
+
+ method._nbSplits = nbSplits;
+ method._nbCorners = 6;
+ method._connectivity = connVariants[ iBetter ];
+
+ return method;
+ }
+
//================================================================================
/*!
* \brief Check if there is a tetraherdon adjacent to the given element via this facet
*/
//================================================================================
- bool TTriangleFacet::hasAdjacentTetra( const SMDS_MeshElement* elem ) const
+ bool TTriangleFacet::hasAdjacentVol( const SMDS_MeshElement* elem,
+ const SMDSAbs_GeometryType geom ) const
{
// find the tetrahedron including the three nodes of facet
const SMDS_MeshNode* n1 = elem->GetNode(_n1);
while ( volIt1->more() )
{
const SMDS_MeshElement* v = volIt1->next();
- SMDSAbs_EntityType type = v->GetEntityType();
- if ( type != SMDSEntity_Tetra && type != SMDSEntity_Quad_Tetra )
+ if ( v->GetGeomType() != geom )
continue;
- if ( type == SMDSEntity_Quad_Tetra && v->GetNodeIndex( n1 ) > 3 )
+ const int lastCornerInd = v->NbCornerNodes() - 1;
+ if ( v->IsQuadratic() && v->GetNodeIndex( n1 ) > lastCornerInd )
continue; // medium node not allowed
const int ind2 = v->GetNodeIndex( n2 );
- if ( ind2 < 0 || 3 < ind2 )
+ if ( ind2 < 0 || lastCornerInd < ind2 )
continue;
const int ind3 = v->GetNodeIndex( n3 );
- if ( ind3 < 0 || 3 < ind3 )
+ if ( ind3 < 0 || lastCornerInd < ind3 )
continue;
return true;
}
} // namespace
//=======================================================================
-//function : SplitVolumesIntoTetra
-//purpose : Split volume elements into tetrahedra.
+//function : SplitVolumes
+//purpose : Split volume elements into tetrahedra or prisms.
+// If facet ID < 0, element is split into tetrahedra,
+// else a hexahedron is split into prisms so that the given facet is
+// split into triangles
//=======================================================================
-void SMESH_MeshEditor::SplitVolumesIntoTetra (const TIDSortedElemSet & theElems,
- const int theMethodFlags)
+void SMESH_MeshEditor::SplitVolumes (const TFacetOfElem & theElems,
+ const int theMethodFlags)
{
// std-like iterator on coordinates of nodes of mesh element
typedef SMDS_StdIterator< SMESH_TNodeXYZ, SMDS_ElemIteratorPtr > NXyzIterator;
NXyzIterator xyzEnd;
SMDS_VolumeTool volTool;
- SMESH_MesherHelper helper( *GetMesh());
+ SMESH_MesherHelper helper( *GetMesh()), fHelper(*GetMesh());
+ fHelper.ToFixNodeParameters( true );
SMESHDS_SubMesh* subMesh = 0;//GetMeshDS()->MeshElements(1);
SMESHDS_SubMesh* fSubMesh = 0;//subMesh;
map< TVolumeFaceKey, const SMDS_MeshNode* > volFace2BaryNode;
double bc[3];
- TIDSortedElemSet::const_iterator elem = theElems.begin();
- for ( ; elem != theElems.end(); ++elem )
+ TFacetOfElem::const_iterator elem2facet = theElems.begin();
+ for ( ; elem2facet != theElems.end(); ++elem2facet )
{
- if ( (*elem)->GetType() != SMDSAbs_Volume )
+ const SMDS_MeshElement* elem = elem2facet->first;
+ const int facetToSplit = elem2facet->second;
+ if ( elem->GetType() != SMDSAbs_Volume )
continue;
- SMDSAbs_EntityType geomType = (*elem)->GetEntityType();
+ const SMDSAbs_EntityType geomType = elem->GetEntityType();
if ( geomType == SMDSEntity_Tetra || geomType == SMDSEntity_Quad_Tetra )
continue;
- if ( !volTool.Set( *elem, /*ignoreCentralNodes=*/false )) continue; // strange...
+ if ( !volTool.Set( elem, /*ignoreCentralNodes=*/false )) continue; // strange...
- TSplitMethod splitMethod = getSplitMethod( volTool, theMethodFlags );
- if ( splitMethod._nbTetra < 1 ) continue;
+ TSplitMethod splitMethod = ( facetToSplit < 0 ?
+ getTetraSplitMethod( volTool, theMethodFlags ) :
+ getPrismSplitMethod( volTool, theMethodFlags, facetToSplit ));
+ if ( splitMethod._nbSplits < 1 ) continue;
// find submesh to add new tetras to
- if ( !subMesh || !subMesh->Contains( *elem ))
+ if ( !subMesh || !subMesh->Contains( elem ))
{
- int shapeID = FindShape( *elem );
+ int shapeID = FindShape( elem );
helper.SetSubShape( shapeID ); // helper will add tetras to the found submesh
subMesh = GetMeshDS()->MeshElements( shapeID );
}
int iQ;
- if ( (*elem)->IsQuadratic() )
+ if ( elem->IsQuadratic() )
{
iQ = 2;
// add quadratic links to the helper
iQ = 1;
helper.SetIsQuadratic( false );
}
- vector<const SMDS_MeshNode*> nodes( (*elem)->begin_nodes(), (*elem)->end_nodes() );
+ vector<const SMDS_MeshNode*> nodes( volTool.GetNodes(),
+ volTool.GetNodes() + elem->NbNodes() );
helper.SetElementsOnShape( true );
if ( splitMethod._baryNode )
{
}
}
- // make tetras
- vector<const SMDS_MeshElement* > tetras( splitMethod._nbTetra ); // splits of a volume
- const int* tetConn = splitMethod._connectivity;
- for ( int i = 0; i < splitMethod._nbTetra; ++i, tetConn += 4 )
- newElems.Append( tetras[ i ] = helper.AddVolume( nodes[ tetConn[0] ],
- nodes[ tetConn[1] ],
- nodes[ tetConn[2] ],
- nodes[ tetConn[3] ]));
+ // make new volumes
+ vector<const SMDS_MeshElement* > splitVols( splitMethod._nbSplits ); // splits of a volume
+ const int* volConn = splitMethod._connectivity;
+ if ( splitMethod._nbCorners == 4 ) // tetra
+ for ( int i = 0; i < splitMethod._nbSplits; ++i, volConn += splitMethod._nbCorners )
+ newElems.Append( splitVols[ i ] = helper.AddVolume( nodes[ volConn[0] ],
+ nodes[ volConn[1] ],
+ nodes[ volConn[2] ],
+ nodes[ volConn[3] ]));
+ else // prisms
+ for ( int i = 0; i < splitMethod._nbSplits; ++i, volConn += splitMethod._nbCorners )
+ newElems.Append( splitVols[ i ] = helper.AddVolume( nodes[ volConn[0] ],
+ nodes[ volConn[1] ],
+ nodes[ volConn[2] ],
+ nodes[ volConn[3] ],
+ nodes[ volConn[4] ],
+ nodes[ volConn[5] ]));
- ReplaceElemInGroups( *elem, tetras, GetMeshDS() );
+ ReplaceElemInGroups( elem, splitVols, GetMeshDS() );
// Split faces on sides of the split volume
map<int, const SMDS_MeshNode*>::iterator iF_n = splitMethod._faceBaryNode.find(iF);
if ( iF_n != splitMethod._faceBaryNode.end() )
{
+ const SMDS_MeshNode *baryNode = iF_n->second;
for ( int iN = 0; iN < nbNodes*iQ; iN += iQ )
{
const SMDS_MeshNode* n1 = fNodes[iN];
const SMDS_MeshNode *n2 = fNodes[(iN+iQ)%(nbNodes*iQ)];
- const SMDS_MeshNode *n3 = iF_n->second;
+ const SMDS_MeshNode *n3 = baryNode;
if ( !volTool.IsFaceExternal( iF ))
swap( n2, n3 );
triangles.push_back( helper.AddFace( n1,n2,n3 ));
-
- if ( fSubMesh && n3->getshapeId() < 1 )
- fSubMesh->AddNode( n3 );
+ }
+ if ( fSubMesh ) // update position of the bary node on geometry
+ {
+ if ( subMesh )
+ subMesh->RemoveNode( baryNode, false );
+ GetMeshDS()->SetNodeOnFace( baryNode, fSubMesh->GetID() );
+ const TopoDS_Shape& s = GetMeshDS()->IndexToShape( fSubMesh->GetID() );
+ if ( !s.IsNull() && s.ShapeType() == TopAbs_FACE )
+ {
+ fHelper.SetSubShape( s );
+ gp_XY uv( 1e100, 1e100 );
+ double distXYZ[4];
+ if ( !fHelper.CheckNodeUV( TopoDS::Face( s ), baryNode,
+ uv, /*tol=*/1e-7, /*force=*/true, distXYZ ) &&
+ uv.X() < 1e100 )
+ {
+ // node is too far from the surface
+ GetMeshDS()->MoveNode( baryNode, distXYZ[1], distXYZ[2], distXYZ[3] );
+ const_cast<SMDS_MeshNode*>( baryNode )->SetPosition
+ ( SMDS_PositionPtr( new SMDS_FacePosition( uv.X(), uv.Y() )));
+ }
+ }
}
}
else
}
}
list< TTriangleFacet >::iterator facet = facets.begin();
+ if ( facet == facets.end() )
+ break;
for ( ; facet != facets.end(); ++facet )
{
if ( !volTool.IsFaceExternal( iF ))
}
ReplaceElemInGroups( face, triangles, GetMeshDS() );
GetMeshDS()->RemoveFreeElement( face, fSubMesh, /*fromGroups=*/false );
- }
+ } // while a face based on facet nodes exists
} // loop on volume faces to split them into triangles
- GetMeshDS()->RemoveFreeElement( *elem, subMesh, /*fromGroups=*/false );
+ GetMeshDS()->RemoveFreeElement( elem, subMesh, /*fromGroups=*/false );
if ( geomType == SMDSEntity_TriQuad_Hexa )
{
GetMeshDS()->RemoveNode( volNodes[i] );
}
} // loop on volumes to split
-
+
myLastCreatedNodes = newNodes;
myLastCreatedElems = newElems;
}
+//=======================================================================
+//function : GetHexaFacetsToSplit
+//purpose : For hexahedra that will be split into prisms, finds facets to
+// split into triangles. Only hexahedra adjacent to the one closest
+// to theFacetNormal.Location() are returned.
+//param [in,out] theHexas - the hexahedra
+//param [in] theFacetNormal - facet normal
+//param [out] theFacets - the hexahedra and found facet IDs
+//=======================================================================
+
+void SMESH_MeshEditor::GetHexaFacetsToSplit( TIDSortedElemSet& theHexas,
+ const gp_Ax1& theFacetNormal,
+ TFacetOfElem & theFacets)
+{
+ #define THIS_METHOD "SMESH_MeshEditor::GetHexaFacetsToSplit(): "
+
+ // Find a hexa closest to the location of theFacetNormal
+
+ const SMDS_MeshElement* startHex;
+ {
+ // get SMDS_ElemIteratorPtr on theHexas
+ typedef const SMDS_MeshElement* TValue;
+ typedef TIDSortedElemSet::iterator TSetIterator;
+ typedef SMDS::SimpleAccessor<TValue,TSetIterator> TAccesor;
+ typedef SMDS_MeshElement::GeomFilter TFilter;
+ typedef SMDS_SetIterator < TValue, TSetIterator, TAccesor, TFilter > TElemSetIter;
+ SMDS_ElemIteratorPtr elemIt = SMDS_ElemIteratorPtr
+ ( new TElemSetIter( theHexas.begin(),
+ theHexas.end(),
+ SMDS_MeshElement::GeomFilter( SMDSGeom_HEXA )));
+
+ SMESH_ElementSearcher* searcher =
+ SMESH_MeshAlgos::GetElementSearcher( *myMesh->GetMeshDS(), elemIt );
+
+ startHex = searcher->FindClosestTo( theFacetNormal.Location(), SMDSAbs_Volume );
+
+ delete searcher;
+
+ if ( !startHex )
+ throw SALOME_Exception( THIS_METHOD "startHex not found");
+ }
+
+ // Select a facet of startHex by theFacetNormal
+
+ SMDS_VolumeTool vTool( startHex );
+ double norm[3], dot, maxDot = 0;
+ int facetID = -1;
+ for ( int iF = 0; iF < vTool.NbFaces(); ++iF )
+ if ( vTool.GetFaceNormal( iF, norm[0], norm[1], norm[2] ))
+ {
+ dot = Abs( theFacetNormal.Direction().Dot( gp_Dir( norm[0], norm[1], norm[2] )));
+ if ( dot > maxDot )
+ {
+ facetID = iF;
+ maxDot = dot;
+ }
+ }
+ if ( facetID < 0 )
+ throw SALOME_Exception( THIS_METHOD "facet of startHex not found");
+
+ // Fill theFacets starting from facetID of startHex
+
+ // facets used for seach of volumes adjacent to already treated ones
+ typedef pair< TFacetOfElem::iterator, int > TElemFacets;
+ typedef map< TVolumeFaceKey, TElemFacets > TFacetMap;
+ TFacetMap facetsToCheck;
+
+ set<const SMDS_MeshNode*> facetNodes;
+ const SMDS_MeshElement* curHex;
+
+ const bool allHex = ( theHexas.size() == myMesh->NbHexas() );
+
+ while ( startHex )
+ {
+ // move in two directions from startHex via facetID
+ for ( int is2nd = 0; is2nd < 2; ++is2nd )
+ {
+ curHex = startHex;
+ int curFacet = facetID;
+ if ( is2nd ) // do not treat startHex twice
+ {
+ vTool.Set( curHex );
+ if ( vTool.IsFreeFace( curFacet, &curHex ))
+ {
+ curHex = 0;
+ }
+ else
+ {
+ vTool.GetFaceNodes( curFacet, facetNodes );
+ vTool.Set( curHex );
+ curFacet = vTool.GetFaceIndex( facetNodes );
+ }
+ }
+ while ( curHex )
+ {
+ // store a facet to split
+ if ( curHex->GetGeomType() != SMDSGeom_HEXA )
+ {
+ theFacets.insert( make_pair( curHex, -1 ));
+ break;
+ }
+ if ( !allHex && !theHexas.count( curHex ))
+ break;
+
+ pair< TFacetOfElem::iterator, bool > facetIt2isNew =
+ theFacets.insert( make_pair( curHex, curFacet ));
+ if ( !facetIt2isNew.second )
+ break;
+
+ // remember not-to-split facets in facetsToCheck
+ int oppFacet = vTool.GetOppFaceIndexOfHex( curFacet );
+ for ( int iF = 0; iF < vTool.NbFaces(); ++iF )
+ {
+ if ( iF == curFacet && iF == oppFacet )
+ continue;
+ TVolumeFaceKey facetKey ( vTool, iF );
+ TElemFacets elemFacet( facetIt2isNew.first, iF );
+ pair< TFacetMap::iterator, bool > it2isnew =
+ facetsToCheck.insert( make_pair( facetKey, elemFacet ));
+ if ( !it2isnew.second )
+ facetsToCheck.erase( it2isnew.first ); // adjacent hex already checked
+ }
+ // pass to a volume adjacent via oppFacet
+ if ( vTool.IsFreeFace( oppFacet, &curHex ))
+ {
+ curHex = 0;
+ }
+ else
+ {
+ // get a new curFacet
+ vTool.GetFaceNodes( oppFacet, facetNodes );
+ vTool.Set( curHex );
+ curFacet = vTool.GetFaceIndex( facetNodes, /*hint=*/curFacet );
+ }
+ }
+ } // move in two directions from startHex via facetID
+
+ // Find a new startHex by facetsToCheck
+
+ startHex = 0;
+ facetID = -1;
+ TFacetMap::iterator fIt = facetsToCheck.begin();
+ while ( !startHex && fIt != facetsToCheck.end() )
+ {
+ const TElemFacets& elemFacets = fIt->second;
+ const SMDS_MeshElement* hex = elemFacets.first->first;
+ int splitFacet = elemFacets.first->second;
+ int lateralFacet = elemFacets.second;
+ facetsToCheck.erase( fIt );
+ fIt = facetsToCheck.begin();
+
+ vTool.Set( hex );
+ if ( vTool.IsFreeFace( lateralFacet, &curHex ) ||
+ curHex->GetGeomType() != SMDSGeom_HEXA )
+ continue;
+ if ( !allHex && !theHexas.count( curHex ))
+ continue;
+
+ startHex = curHex;
+
+ // find a facet of startHex to split
+
+ set<const SMDS_MeshNode*> lateralNodes;
+ vTool.GetFaceNodes( lateralFacet, lateralNodes );
+ vTool.GetFaceNodes( splitFacet, facetNodes );
+ int oppLateralFacet = vTool.GetOppFaceIndexOfHex( lateralFacet );
+ vTool.Set( startHex );
+ lateralFacet = vTool.GetFaceIndex( lateralNodes, oppLateralFacet );
+
+ // look for a facet of startHex having common nodes with facetNodes
+ // but not lateralFacet
+ for ( int iF = 0; iF < vTool.NbFaces(); ++iF )
+ {
+ if ( iF == lateralFacet )
+ continue;
+ int nbCommonNodes = 0;
+ const SMDS_MeshNode** nn = vTool.GetFaceNodes( iF );
+ for ( int iN = 0, nbN = vTool.NbFaceNodes( iF ); iN < nbN; ++iN )
+ nbCommonNodes += facetNodes.count( nn[ iN ]);
+
+ if ( nbCommonNodes >= 2 )
+ {
+ facetID = iF;
+ break;
+ }
+ }
+ if ( facetID < 0 )
+ throw SALOME_Exception( THIS_METHOD "facet of a new startHex not found");
+ }
+ } // while ( startHex )
+}
+
//=======================================================================
//function : AddToSameGroups
//purpose : add elemToAdd to the groups the elemInGroups belongs to
//=======================================================================
void SMESH_MeshEditor::makeWalls (TNodeOfNodeListMap & mapNewNodes,
- TElemOfElemListMap & newElemsMap,
+ TTElemOfElemListMap & newElemsMap,
TElemOfVecOfNnlmiMap & elemNewNodesMap,
TIDSortedElemSet& elemSet,
const int nbSteps,
// Make a ceiling for each element ie an equal element of last new nodes.
// Find free links of faces - make edges and sweep them into faces.
- TElemOfElemListMap::iterator itElem = newElemsMap.begin();
+ TTElemOfElemListMap::iterator itElem = newElemsMap.begin();
TElemOfVecOfNnlmiMap::iterator itElemNodes = elemNewNodesMap.begin();
for ( ; itElem != newElemsMap.end(); itElem++, itElemNodes++ )
{
TNodeOfNodeListMap mapNewNodes;
TElemOfVecOfNnlmiMap mapElemNewNodes;
- TElemOfElemListMap newElemsMap;
+ TTElemOfElemListMap newElemsMap;
const bool isQuadraticMesh = bool( myMesh->NbEdges(ORDER_QUADRATIC) +
myMesh->NbFaces(ORDER_QUADRATIC) +
//=======================================================================
SMESH_MeshEditor::PGroupIDs
-SMESH_MeshEditor::ExtrusionSweep (TIDSortedElemSet & theElems,
- const gp_Vec& theStep,
- const int theNbSteps,
- TElemOfElemListMap& newElemsMap,
- const bool theMakeGroups,
- const int theFlags,
- const double theTolerance)
+SMESH_MeshEditor::ExtrusionSweep (TIDSortedElemSet & theElems,
+ const gp_Vec& theStep,
+ const int theNbSteps,
+ TTElemOfElemListMap& newElemsMap,
+ const bool theMakeGroups,
+ const int theFlags,
+ const double theTolerance)
{
ExtrusParam aParams;
aParams.myDir = gp_Dir(theStep);
//=======================================================================
SMESH_MeshEditor::PGroupIDs
-SMESH_MeshEditor::ExtrusionSweep (TIDSortedElemSet & theElems,
- ExtrusParam& theParams,
- TElemOfElemListMap& newElemsMap,
- const bool theMakeGroups,
- const int theFlags,
- const double theTolerance)
+SMESH_MeshEditor::ExtrusionSweep (TIDSortedElemSet & theElems,
+ ExtrusParam& theParams,
+ TTElemOfElemListMap& newElemsMap,
+ const bool theMakeGroups,
+ const int theFlags,
+ const double theTolerance)
{
myLastCreatedElems.Clear();
myLastCreatedNodes.Clear();
if( aS.ShapeType() == TopAbs_EDGE ) {
aTrackEdge = TopoDS::Edge( aS );
// the Edge must not be degenerated
- if ( BRep_Tool::Degenerated( aTrackEdge ) )
+ if ( SMESH_Algo::isDegenerated( aTrackEdge ) )
return EXTR_BAD_PATH_SHAPE;
TopExp::Vertices( aTrackEdge, aV1, aV2 );
aItN = theTrack->GetFather()->GetSubMesh( aV1 )->GetSubMeshDS()->GetNodes();
else if( aS.ShapeType() == TopAbs_EDGE ) {
aTrackEdge = TopoDS::Edge( aS );
// the Edge must not be degenerated
- if ( BRep_Tool::Degenerated( aTrackEdge ) )
+ if ( SMESH_Algo::isDegenerated( aTrackEdge ) )
return EXTR_BAD_PATH_SHAPE;
TopExp::Vertices( aTrackEdge, aV1, aV2 );
const SMDS_MeshNode* aN1 = SMESH_Algo::VertexNode( aV1, pMeshDS );
TopExp_Explorer eExp(aS, TopAbs_EDGE);
for(; eExp.More(); eExp.Next()) {
TopoDS_Edge E = TopoDS::Edge( eExp.Current() );
- if( BRep_Tool::Degenerated(E) ) continue;
+ if( SMESH_Algo::isDegenerated(E) ) continue;
SMESH_subMesh* SM = theTrack->GetSubMesh(E);
if(SM) {
LSM.push_back(SM);
for( ; itPP != fullList.end(); itPP++) {
aPPs.push_back( *itPP );
if ( theHasAngles && itAngles != theAngles.end() )
- aPPs.back().SetAngle( *itAngles );
+ aPPs.back().SetAngle( *itAngles++ );
}
TNodeOfNodeListMap mapNewNodes;
TElemOfVecOfNnlmiMap mapElemNewNodes;
- TElemOfElemListMap newElemsMap;
+ TTElemOfElemListMap newElemsMap;
TIDSortedElemSet::iterator itElem;
// source elements for each generated one
SMESH_SequenceOfElemPtr srcElems, srcNodes;
if ( ( theMakeGroups && theCopy ) ||
( theMakeGroups && theTargetMesh ) )
- newGroupIDs = generateGroups( srcNodes, srcElems, groupPostfix, theTargetMesh );
+ newGroupIDs = generateGroups( srcNodes, srcElems, groupPostfix, theTargetMesh, false );
return newGroupIDs;
}
//=======================================================================
/*!
* \brief Create groups of elements made during transformation
- * \param nodeGens - nodes making corresponding myLastCreatedNodes
- * \param elemGens - elements making corresponding myLastCreatedElems
- * \param postfix - to append to names of new groups
+ * \param nodeGens - nodes making corresponding myLastCreatedNodes
+ * \param elemGens - elements making corresponding myLastCreatedElems
+ * \param postfix - to append to names of new groups
+ * \param targetMesh - mesh to create groups in
+ * \param topPresent - is there "top" elements that are created by sweeping
*/
//=======================================================================
SMESH_MeshEditor::generateGroups(const SMESH_SequenceOfElemPtr& nodeGens,
const SMESH_SequenceOfElemPtr& elemGens,
const std::string& postfix,
- SMESH_Mesh* targetMesh)
+ SMESH_Mesh* targetMesh,
+ const bool topPresent)
{
PGroupIDs newGroupIDs( new list<int> );
SMESH_Mesh* mesh = targetMesh ? targetMesh : GetMesh();
// Sort existing groups by types and collect their names
- // to store an old group and a generated new ones
+ // containers to store an old group and generated new ones;
+ // 1st new group is for result elems of different type than a source one;
+ // 2nd new group is for same type result elems ("top" group at extrusion)
using boost::tuple;
using boost::make_tuple;
typedef tuple< SMESHDS_GroupBase*, SMESHDS_Group*, SMESHDS_Group* > TOldNewGroup;
// Loop on nodes and elements to add them in new groups
+ vector< const SMDS_MeshElement* > resultElems;
for ( int isNodes = 0; isNodes < 2; ++isNodes )
{
const SMESH_SequenceOfElemPtr& gens = isNodes ? nodeGens : elemGens;
continue;
}
// collect all elements made by the iElem-th sourceElem
- list< const SMDS_MeshElement* > resultElems;
+ resultElems.clear();
if ( const SMDS_MeshElement* resElem = elems( iElem ))
if ( resElem != sourceElem )
resultElems.push_back( resElem );
if ( resElem != sourceElem )
resultElems.push_back( resElem );
- // there must be a top element
const SMDS_MeshElement* topElem = 0;
- if ( isNodes )
+ if ( isNodes ) // there must be a top element
{
topElem = resultElems.back();
resultElems.pop_back();
}
else
{
- list< const SMDS_MeshElement* >::reverse_iterator resElemIt = resultElems.rbegin();
+ vector< const SMDS_MeshElement* >::reverse_iterator resElemIt = resultElems.rbegin();
for ( ; resElemIt != resultElems.rend() ; ++resElemIt )
if ( (*resElemIt)->GetType() == sourceElem->GetType() )
{
topElem = *resElemIt;
- resultElems.erase( --(resElemIt.base()) ); // erase *resElemIt
+ *resElemIt = 0; // erase *resElemIt
break;
}
}
-
// add resultElems to groups originted from ones the sourceElem belongs to
list< TOldNewGroup >::iterator gOldNew, gLast = groupsOldNew.end();
for ( gOldNew = groupsOldNew.begin(); gOldNew != gLast; ++gOldNew )
{
// fill in a new group
SMDS_MeshGroup & newGroup = gOldNew->get<1>()->SMDSGroup();
- list< const SMDS_MeshElement* >::iterator resLast = resultElems.end(), resElemIt;
+ vector< const SMDS_MeshElement* >::iterator resLast = resultElems.end(), resElemIt;
for ( resElemIt = resultElems.begin(); resElemIt != resLast; ++resElemIt )
- newGroup.Add( *resElemIt );
+ if ( *resElemIt )
+ newGroup.Add( *resElemIt );
// fill a "top" group
if ( topElem )
{
SMDS_MeshGroup & newTopGroup = gOldNew->get<2>()->SMDSGroup();
newTopGroup.Add( topElem );
- }
+ }
}
}
} // loop on created elements
SMESHDS_GroupBase* oldGroupDS = orderedOldNewGroups[i]->get<0>();
SMESHDS_Group* newGroups[2] = { orderedOldNewGroups[i]->get<1>(),
orderedOldNewGroups[i]->get<2>() };
- const int nbNewGroups = !newGroups[0]->IsEmpty() + !newGroups[1]->IsEmpty();
for ( int is2nd = 0; is2nd < 2; ++is2nd )
{
SMESHDS_Group* newGroupDS = newGroups[ is2nd ];
newGroupDS->SetType( newGroupDS->GetElements()->next()->GetType() );
// make a name
- const bool isTop = ( nbNewGroups == 2 &&
+ const bool isTop = ( topPresent &&
newGroupDS->GetType() == oldGroupDS->GetType() &&
is2nd );
string name = oldGroupDS->GetStoreName();
+ { // remove trailing whitespaces (issue 22599)
+ size_t size = name.size();
+ while ( size > 1 && isspace( name[ size-1 ]))
+ --size;
+ if ( size != name.size() )
+ {
+ name.resize( size );
+ oldGroupDS->SetStoreName( name.c_str() );
+ }
+ }
if ( !targetMesh ) {
string suffix = ( isTop ? "top": postfix.c_str() );
name += "_";
aHelper.SetIsQuadratic( true );
aHelper.SetIsBiQuadratic( theToBiQuad );
aHelper.SetElementsOnShape(true);
+ aHelper.ToFixNodeParameters( true );
// convert elements assigned to sub-meshes
int nbCheckedElems = 0;
if ( !volume ) continue;
const SMDSAbs_EntityType type = volume->GetEntityType();
- if (( theToBiQuad && type == SMDSEntity_TriQuad_Hexa ) ||
- ( !theToBiQuad && type == SMDSEntity_Quad_Hexa ))
+ if ( volume->IsQuadratic() )
{
- aHelper.AddTLinks( static_cast< const SMDS_MeshVolume* >( volume ));
- continue;
+ bool alreadyOK;
+ switch ( type )
+ {
+ case SMDSEntity_Quad_Hexa: alreadyOK = !theToBiQuad; break;
+ case SMDSEntity_TriQuad_Hexa: alreadyOK = theToBiQuad; break;
+ default: alreadyOK = true;
+ }
+ if ( alreadyOK )
+ {
+ aHelper.AddTLinks( static_cast< const SMDS_MeshVolume* >( volume ));
+ continue;
+ }
}
const int id = volume->GetID();
vector<const SMDS_MeshNode *> nodes (volume->begin_nodes(), volume->end_nodes());
//================================================================================
/*!
- \brief Identify the elements that will be affected by node duplication (actual duplication is not performed.
+ \brief Identify the elements that will be affected by node duplication (actual duplication is not performed).
This method is the first step of DoubleNodeElemGroupsInRegion.
\param theElems - list of groups of elements (edges or faces) to be replicated
\param theNodesNot - list of groups of nodes not to replicated
\param theShape - shape to detect affected elements (element which geometric center
- located on or inside shape).
+ located on or inside shape). If the shape is null, detection is done on faces orientations
+ (select elements with a gravity center on the side given by faces normals).
+ This mode (null shape) is faster, but works only when theElems are faces, with coherents orientations.
The replicated nodes should be associated to affected elements.
\return groups of affected elements
\sa DoubleNodeElemGroupsInRegion()
TIDSortedElemSet& theAffectedElems)
{
if ( theShape.IsNull() )
- return false;
-
- const double aTol = Precision::Confusion();
- auto_ptr< BRepClass3d_SolidClassifier> bsc3d;
- auto_ptr<_FaceClassifier> aFaceClassifier;
- if ( theShape.ShapeType() == TopAbs_SOLID )
{
- bsc3d.reset( new BRepClass3d_SolidClassifier(theShape));;
- bsc3d->PerformInfinitePoint(aTol);
- }
- else if (theShape.ShapeType() == TopAbs_FACE )
- {
- aFaceClassifier.reset( new _FaceClassifier(TopoDS::Face(theShape)));
+ std::set<const SMDS_MeshNode*> alreadyCheckedNodes;
+ std::set<const SMDS_MeshElement*> alreadyCheckedElems;
+ std::set<const SMDS_MeshElement*> edgesToCheck;
+ alreadyCheckedNodes.clear();
+ alreadyCheckedElems.clear();
+ edgesToCheck.clear();
+
+ // --- iterates on elements to be replicated and get elements by back references from their nodes
+
+ TIDSortedElemSet::const_iterator elemItr = theElems.begin();
+ int ielem;
+ for ( ielem=1; elemItr != theElems.end(); ++elemItr )
+ {
+ SMDS_MeshElement* anElem = (SMDS_MeshElement*)*elemItr;
+ if (!anElem || (anElem->GetType() != SMDSAbs_Face))
+ continue;
+ gp_XYZ normal;
+ SMESH_MeshAlgos::FaceNormal( anElem, normal, /*normalized=*/true );
+ MESSAGE("element " << ielem++ << " normal " << normal.X() << " " << normal.Y() << " " << normal.Z());
+ std::set<const SMDS_MeshNode*> nodesElem;
+ nodesElem.clear();
+ SMDS_ElemIteratorPtr nodeItr = anElem->nodesIterator();
+ while ( nodeItr->more() )
+ {
+ const SMDS_MeshNode* aNode = cast2Node(nodeItr->next());
+ nodesElem.insert(aNode);
+ }
+ std::set<const SMDS_MeshNode*>::iterator nodit = nodesElem.begin();
+ for (; nodit != nodesElem.end(); nodit++)
+ {
+ MESSAGE(" noeud ");
+ const SMDS_MeshNode* aNode = *nodit;
+ if ( !aNode || theNodesNot.find(aNode) != theNodesNot.end() )
+ continue;
+ if (alreadyCheckedNodes.find(aNode) != alreadyCheckedNodes.end())
+ continue;
+ alreadyCheckedNodes.insert(aNode);
+ SMDS_ElemIteratorPtr backElemItr = aNode->GetInverseElementIterator();
+ while ( backElemItr->more() )
+ {
+ MESSAGE(" backelem ");
+ const SMDS_MeshElement* curElem = backElemItr->next();
+ if (alreadyCheckedElems.find(curElem) != alreadyCheckedElems.end())
+ continue;
+ if (theElems.find(curElem) != theElems.end())
+ continue;
+ alreadyCheckedElems.insert(curElem);
+ double x=0, y=0, z=0;
+ int nb = 0;
+ SMDS_ElemIteratorPtr nodeItr2 = curElem->nodesIterator();
+ while ( nodeItr2->more() )
+ {
+ const SMDS_MeshNode* anotherNode = cast2Node(nodeItr2->next());
+ x += anotherNode->X();
+ y += anotherNode->Y();
+ z += anotherNode->Z();
+ nb++;
+ }
+ gp_XYZ p;
+ p.SetCoord( x/nb -aNode->X(),
+ y/nb -aNode->Y(),
+ z/nb -aNode->Z() );
+ MESSAGE(" check " << p.X() << " " << p.Y() << " " << p.Z());
+ if (normal*p > 0)
+ {
+ MESSAGE(" --- inserted")
+ theAffectedElems.insert( curElem );
+ }
+ else if (curElem->GetType() == SMDSAbs_Edge)
+ edgesToCheck.insert(curElem);
+ }
+ }
+ }
+ // --- add also edges lying on the set of faces (all nodes in alreadyCheckedNodes)
+ std::set<const SMDS_MeshElement*>::iterator eit = edgesToCheck.begin();
+ for( ; eit != edgesToCheck.end(); eit++)
+ {
+ bool onside = true;
+ const SMDS_MeshElement* anEdge = *eit;
+ SMDS_ElemIteratorPtr nodeItr = anEdge->nodesIterator();
+ while ( nodeItr->more() )
+ {
+ const SMDS_MeshNode* aNode = cast2Node(nodeItr->next());
+ if (alreadyCheckedNodes.find(aNode) == alreadyCheckedNodes.end())
+ {
+ onside = false;
+ break;
+ }
+ }
+ if (onside)
+ {
+ MESSAGE(" --- edge onside inserted")
+ theAffectedElems.insert(anEdge);
+ }
+ }
}
-
- // iterates on indicated elements and get elements by back references from their nodes
- TIDSortedElemSet::const_iterator elemItr = theElems.begin();
- for ( ; elemItr != theElems.end(); ++elemItr )
+ else
{
- SMDS_MeshElement* anElem = (SMDS_MeshElement*)*elemItr;
- if (!anElem)
- continue;
+ const double aTol = Precision::Confusion();
+ auto_ptr< BRepClass3d_SolidClassifier> bsc3d;
+ auto_ptr<_FaceClassifier> aFaceClassifier;
+ if ( theShape.ShapeType() == TopAbs_SOLID )
+ {
+ bsc3d.reset( new BRepClass3d_SolidClassifier(theShape));;
+ bsc3d->PerformInfinitePoint(aTol);
+ }
+ else if (theShape.ShapeType() == TopAbs_FACE )
+ {
+ aFaceClassifier.reset( new _FaceClassifier(TopoDS::Face(theShape)));
+ }
- SMDS_ElemIteratorPtr nodeItr = anElem->nodesIterator();
- while ( nodeItr->more() )
+ // iterates on indicated elements and get elements by back references from their nodes
+ TIDSortedElemSet::const_iterator elemItr = theElems.begin();
+ int ielem;
+ for ( ielem = 1; elemItr != theElems.end(); ++elemItr )
{
- const SMDS_MeshNode* aNode = cast2Node(nodeItr->next());
- if ( !aNode || theNodesNot.find(aNode) != theNodesNot.end() )
+ MESSAGE("element " << ielem++);
+ SMDS_MeshElement* anElem = (SMDS_MeshElement*)*elemItr;
+ if (!anElem)
continue;
- SMDS_ElemIteratorPtr backElemItr = aNode->GetInverseElementIterator();
- while ( backElemItr->more() )
+ SMDS_ElemIteratorPtr nodeItr = anElem->nodesIterator();
+ while ( nodeItr->more() )
{
- const SMDS_MeshElement* curElem = backElemItr->next();
- if ( curElem && theElems.find(curElem) == theElems.end() &&
- ( bsc3d.get() ?
- isInside( curElem, *bsc3d, aTol ) :
- isInside( curElem, *aFaceClassifier, aTol )))
- theAffectedElems.insert( curElem );
+ MESSAGE(" noeud ");
+ const SMDS_MeshNode* aNode = cast2Node(nodeItr->next());
+ if ( !aNode || theNodesNot.find(aNode) != theNodesNot.end() )
+ continue;
+ SMDS_ElemIteratorPtr backElemItr = aNode->GetInverseElementIterator();
+ while ( backElemItr->more() )
+ {
+ MESSAGE(" backelem ");
+ const SMDS_MeshElement* curElem = backElemItr->next();
+ if ( curElem && theElems.find(curElem) == theElems.end() &&
+ ( bsc3d.get() ?
+ isInside( curElem, *bsc3d, aTol ) :
+ isInside( curElem, *aFaceClassifier, aTol )))
+ theAffectedElems.insert( curElem );
+ }
}
}
}
gp_Vec v2(p0, g2);
gp_Vec n1 = vref.Crossed(v1);
gp_Vec n2 = vref.Crossed(v2);
- return n2.AngleWithRef(n1, vref);
+ try {
+ return n2.AngleWithRef(n1, vref);
+ }
+ catch ( Standard_Failure ) {
+ }
+ return Max( v1.Magnitude(), v2.Magnitude() );
}
/*!
* If there is no shared faces between the group #n and the group #p in the list, the group j_n_p is not created.
* All the flat elements are gathered into the group named "joints3D" (or "joints2D" in 2D situation).
* The flat element of the multiple junctions between the simple junction are stored in a group named "jointsMultiples".
- * @param theElems - list of groups of volumes, where a group of volume is a set of
- * SMDS_MeshElements sorted by Id.
- * @param createJointElems - if TRUE, create the elements
- * @return TRUE if operation has been completed successfully, FALSE otherwise
+ * \param theElems - list of groups of volumes, where a group of volume is a set of
+ * SMDS_MeshElements sorted by Id.
+ * \param createJointElems - if TRUE, create the elements
+ * \param onAllBoundaries - if TRUE, the nodes and elements are also created on
+ * the boundary between \a theDomains and the rest mesh
+ * \return TRUE if operation has been completed successfully, FALSE otherwise
*/
bool SMESH_MeshEditor::DoubleNodesOnGroupBoundaries( const std::vector<TIDSortedElemSet>& theElems,
- bool createJointElems)
+ bool createJointElems,
+ bool onAllBoundaries)
{
MESSAGE("----------------------------------------------");
MESSAGE("SMESH_MeshEditor::doubleNodesOnGroupBoundaries");
MESSAGE(".. Number of domains :"<<theElems.size());
+ TIDSortedElemSet theRestDomElems;
+ const int iRestDom = -1;
+ const int idom0 = onAllBoundaries ? iRestDom : 0;
+ const int nbDomains = theElems.size();
+
// Check if the domains do not share an element
- for (int idom = 0; idom < theElems.size()-1; idom++)
+ for (int idom = 0; idom < nbDomains-1; idom++)
{
// MESSAGE("... Check of domain #" << idom);
const TIDSortedElemSet& domain = theElems[idom];
TIDSortedElemSet::const_iterator elemItr = domain.begin();
for (; elemItr != domain.end(); ++elemItr)
{
- SMDS_MeshElement* anElem = (SMDS_MeshElement*) *elemItr;
+ const SMDS_MeshElement* anElem = *elemItr;
int idombisdeb = idom + 1 ;
for (int idombis = idombisdeb; idombis < theElems.size(); idombis++) // check if the element belongs to a domain further in the list
{
}
}
- for (int idom = 0; idom < theElems.size(); idom++)
+ for (int idom = 0; idom < nbDomains; idom++)
{
// --- build a map (face to duplicate --> volume to modify)
TIDSortedElemSet::const_iterator elemItr = domain.begin();
for (; elemItr != domain.end(); ++elemItr)
{
- SMDS_MeshElement* anElem = (SMDS_MeshElement*) *elemItr;
+ const SMDS_MeshElement* anElem = *elemItr;
if (!anElem)
continue;
int vtkId = anElem->getVtkId();
{
int smdsId = meshDS->fromVtkToSmds(neighborsVtkIds[n]);
const SMDS_MeshElement* elem = meshDS->FindElement(smdsId);
- if (! domain.count(elem)) // neighbor is in another domain : face is shared
+ if (elem && ! domain.count(elem)) // neighbor is in another domain : face is shared
{
bool ok = false ;
- for (int idombis = 0; idombis < theElems.size(); idombis++) // check if the neighbor belongs to another domain of the list
+ for (int idombis = 0; idombis < theElems.size() && !ok; idombis++) // check if the neighbor belongs to another domain of the list
{
// MESSAGE("Domain " << idombis);
const TIDSortedElemSet& domainbis = theElems[idombis];
if ( domainbis.count(elem)) ok = true ; // neighbor is in a correct domain : face is kept
}
- if ( ok ) // the characteristics of the face is stored
+ if ( ok || onAllBoundaries ) // the characteristics of the face is stored
{
DownIdType face(downIds[n], downTypes[n]);
- if (!faceDomains.count(face))
- faceDomains[face] = emptyMap; // create an empty entry for face
if (!faceDomains[face].count(idom))
{
faceDomains[face][idom] = vtkId; // volume associated to face in this domain
celldom[vtkId] = idom;
//MESSAGE(" cell with a border " << vtkId << " domain " << idom);
}
+ if ( !ok )
+ {
+ theRestDomElems.insert( elem );
+ faceDomains[face][iRestDom] = neighborsVtkIds[n];
+ celldom[neighborsVtkIds[n]] = iRestDom;
+ }
}
}
}
// explore the nodes of the face and see if they belong to a cell in the domain,
// which has only a node or an edge on the border (not a shared face)
- for (int idomain = 0; idomain < theElems.size(); idomain++)
+ for (int idomain = idom0; idomain < nbDomains; idomain++)
{
//MESSAGE("Domain " << idomain);
- const TIDSortedElemSet& domain = theElems[idomain];
+ const TIDSortedElemSet& domain = (idomain == iRestDom) ? theRestDomElems : theElems[idomain];
itface = faceDomains.begin();
for (; itface != faceDomains.end(); ++itface)
{
- std::map<int, int> domvol = itface->second;
+ const std::map<int, int>& domvol = itface->second;
if (!domvol.count(idomain))
continue;
DownIdType face = itface->first;
//no cells created after BuildDownWardConnectivity
}
DownIdType aCell(downId, vtkType);
- if (!cellDomains.count(aCell))
- cellDomains[aCell] = emptyMap; // create an empty entry for cell
cellDomains[aCell][idomain] = vtkId;
celldom[vtkId] = idomain;
//MESSAGE(" cell " << vtkId << " domain " << idomain);
std::map<int, std::vector<int> > mutipleNodesToFace; // nodes multi domains with domain order to transform in Face (junction between 3 or more 2D domains)
MESSAGE(".. Duplication of the nodes");
- for (int idomain = 0; idomain < theElems.size(); idomain++)
+ for (int idomain = idom0; idomain < nbDomains; idomain++)
{
itface = faceDomains.begin();
for (; itface != faceDomains.end(); ++itface)
{
- std::map<int, int> domvol = itface->second;
+ const std::map<int, int>& domvol = itface->second;
if (!domvol.count(idomain))
continue;
DownIdType face = itface->first;
for (; itn != oldNodes.end(); ++itn)
{
int oldId = *itn;
- //MESSAGE("-+-+-a node " << oldId);
- if (!nodeDomains.count(oldId))
- nodeDomains[oldId] = emptyMap; // create an empty entry for node
if (nodeDomains[oldId].empty())
{
nodeDomains[oldId][idomain] = oldId; // keep the old node in the first domain
//MESSAGE("-+-+-b oldNode " << oldId << " domain " << idomain);
}
- std::map<int, int>::iterator itdom = domvol.begin();
+ std::map<int, int>::const_iterator itdom = domvol.begin();
for (; itdom != domvol.end(); ++itdom)
{
int idom = itdom->first;
}
MESSAGE(".. Creation of elements");
- for (int idomain = 0; idomain < theElems.size(); idomain++)
+ for (int idomain = idom0; idomain < nbDomains; idomain++)
{
itface = faceDomains.begin();
for (; itface != faceDomains.end(); ++itface)
for (int id=0; id < doms.size(); id++)
{
int idom = doms[id];
+ const TIDSortedElemSet& domain = (idom == iRestDom) ? theRestDomElems : theElems[idom];
for (int ivol=0; ivol<nbvol; ivol++)
{
int smdsId = meshDS->fromVtkToSmds(vtkVolIds[ivol]);
SMDS_MeshElement* elem = (SMDS_MeshElement*)meshDS->FindElement(smdsId);
- if (theElems[idom].count(elem))
+ if (domain.count(elem))
{
SMDS_VtkVolume* svol = dynamic_cast<SMDS_VtkVolume*>(elem);
domvol[idom] = svol;
feDom.clear();
MESSAGE(".. Modification of elements");
- for (int idomain = 0; idomain < theElems.size(); idomain++)
+ for (int idomain = idom0; idomain < nbDomains; idomain++)
{
std::map<int, std::map<int, int> >::const_iterator itnod = nodeDomains.begin();
for (; itnod != nodeDomains.end(); ++itnod)