-// Copyright (C) 2007-2019 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2021 CEA/DEN, EDF R&D, OPEN CASCADE
//
// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
#ifndef WIN32
#include <boost/thread/thread.hpp>
#include <boost/bind.hpp>
-#else
+#else
#include <pthread.h>
#endif
+#include <boost/filesystem.hpp>
+namespace fs=boost::filesystem;
+
// maximum stored group name length in MED file
#define MAX_MED_GROUP_NAME_LENGTH 80
//=============================================================================
/*!
- *
+ *
*/
//=============================================================================
-SMESH_Mesh::SMESH_Mesh(int theLocalId,
+SMESH_Mesh::SMESH_Mesh(int theLocalId,
SMESH_Gen* theGen,
bool theIsEmbeddedMode,
SMESHDS_Document* theDocument):
if(MYDEBUG) MESSAGE("SMESH_Mesh::SMESH_Mesh(int localId)");
_id = theLocalId;
_gen = theGen;
- _myDocument = theDocument;
- _myMeshDS = theDocument->NewMesh(theIsEmbeddedMode,theLocalId);
+ _document = theDocument;
+ _meshDS = theDocument->NewMesh(theIsEmbeddedMode,theLocalId);
_isShapeToMesh = false;
_isAutoColor = false;
_isModified = false;
_shapeDiagonal = 0.0;
_callUp = NULL;
- _myMeshDS->ShapeToMesh( PseudoShape() );
+ _meshDS->ShapeToMesh( PseudoShape() );
_subMeshHolder = new SubMeshHolder;
+ // Temporary folder that will be used by parallel computation
+ tmp_folder = fs::temp_directory_path()/fs::unique_path(fs::path("SMESH_%%%%-%%%%"));
+ fs::create_directories(tmp_folder);
+
+ // assure unique persistent ID
+ if ( _document->NbMeshes() > 1 )
+ {
+ std::set< int > ids;
+ for ( _document->InitMeshesIterator(); _document->MoreMesh(); )
+ {
+ SMESHDS_Mesh * meshDS =_document->NextMesh();
+ if ( meshDS != _meshDS )
+ ids.insert( meshDS->GetPersistentId() );
+ }
+
+ if ( ids.count( _meshDS->GetPersistentId() ))
+ {
+ int uniqueID = *ids.rbegin() + 1;
+ _meshDS->SetPersistentId( uniqueID );
+ }
+ }
}
//================================================================================
_groupId( 0 ),
_nbSubShapes( 0 ),
_isShapeToMesh( false ),
- _myDocument( 0 ),
- _myMeshDS( 0 ),
+ _document( 0 ),
+ _meshDS( 0 ),
_gen( 0 ),
_isAutoColor( false ),
_isModified( false ),
{
if(MYDEBUG) MESSAGE("SMESH_Mesh::~SMESH_Mesh");
- if ( _myDocument ) // avoid destructing _myMeshDS from ~SMESH_Gen()
- _myDocument->RemoveMesh( _id );
- _myDocument = 0;
+ if ( _document ) // avoid destructing _meshDS from ~SMESH_Gen()
+ _document->RemoveMesh( _id );
+ _document = 0;
// remove self from studyContext
if ( _gen )
studyContext->mapMesh.erase( _id );
}
- _myMeshDS->ClearMesh();
+ _meshDS->ClearMesh();
// issue 0020340: EDF 1022 SMESH : Crash with FindNodeClosestTo in a second new study
// Notify event listeners at least that something happens
if ( _callUp) delete _callUp;
_callUp = 0;
- if ( _myMeshDS ) {
- // delete _myMeshDS, in a thread in order not to block closing a study with large meshes
+ if ( _meshDS ) {
+ // delete _meshDS, in a thread in order not to block closing a study with large meshes
#ifndef WIN32
- boost::thread aThread(boost::bind( & deleteMeshDS, _myMeshDS ));
+ boost::thread aThread(boost::bind( & deleteMeshDS, _meshDS ));
#else
pthread_t thread;
- int result=pthread_create(&thread, NULL, deleteMeshDS, (void*)_myMeshDS);
+ int result=pthread_create(&thread, NULL, deleteMeshDS, (void*)_meshDS);
#endif
}
}
bool SMESH_Mesh::MeshExists( int meshId ) const
{
- return _myDocument ? bool( _myDocument->GetMesh( meshId )) : false;
+ return _document ? bool( _document->GetMesh( meshId )) : false;
}
//================================================================================
if ( !aShape.IsNull() && _isShapeToMesh ) {
if ( aShape.ShapeType() != TopAbs_COMPOUND && // group contents is allowed to change
- _myMeshDS->ShapeToMesh().ShapeType() != TopAbs_COMPOUND )
+ _meshDS->ShapeToMesh().ShapeType() != TopAbs_COMPOUND )
throw SALOME_Exception(LOCALIZED ("a shape to mesh has already been defined"));
}
// clear current data
- if ( !_myMeshDS->ShapeToMesh().IsNull() )
+ if ( !_meshDS->ShapeToMesh().IsNull() )
{
// removal of a shape to mesh, delete objects referring to sub-shapes:
// - sub-meshes
std::map <int, SMESH_Group *>::iterator i_gr = _mapGroup.begin();
while ( i_gr != _mapGroup.end() ) {
if ( dynamic_cast<SMESHDS_GroupOnGeom*>( i_gr->second->GetGroupDS() )) {
- _myMeshDS->RemoveGroup( i_gr->second->GetGroupDS() );
+ _meshDS->RemoveGroup( i_gr->second->GetGroupDS() );
delete i_gr->second;
_mapGroup.erase( i_gr++ );
}
// clear SMESHDS
TopoDS_Shape aNullShape;
- _myMeshDS->ShapeToMesh( aNullShape );
+ _meshDS->ShapeToMesh( aNullShape );
_shapeDiagonal = 0.0;
}
// set a new geometry
if ( !aShape.IsNull() )
{
- _myMeshDS->ShapeToMesh(aShape);
+ _meshDS->ShapeToMesh(aShape);
_isShapeToMesh = true;
- _nbSubShapes = _myMeshDS->MaxShapeIndex();
+ _nbSubShapes = _meshDS->MaxShapeIndex();
// fill map of ancestors
fillAncestorsMap(aShape);
{
_isShapeToMesh = false;
_shapeDiagonal = 0.0;
- _myMeshDS->ShapeToMesh( PseudoShape() );
+ _meshDS->ShapeToMesh( PseudoShape() );
}
_isModified = false;
}
TopoDS_Shape SMESH_Mesh::GetShapeToMesh() const
{
- return _myMeshDS->ShapeToMesh();
+ return _meshDS->ShapeToMesh();
}
//=======================================================================
if ( HasShapeToMesh() ) // remove all nodes and elements
{
// clear mesh data
- _myMeshDS->ClearMesh();
+ _meshDS->ClearMesh();
// update compute state of submeshes
if ( SMESH_subMesh *sm = GetSubMeshContaining( GetShapeToMesh() ) )
_isShapeToMesh = false;
DriverUNV_R_SMDS_Mesh myReader;
- myReader.SetMesh(_myMeshDS);
+ myReader.SetMesh(_meshDS);
myReader.SetFile(theFileName);
myReader.SetMeshId(-1);
myReader.Perform();
{
SMDS_MeshGroup* aGroup = gr2names->first;
const std::string& aName = gr2names->second;
- SMESHDS_Group* aGroupDS = new SMESHDS_Group( anId++, _myMeshDS, aGroup->GetType() );
+ SMESHDS_Group* aGroupDS = new SMESHDS_Group( anId++, _meshDS, aGroup->GetType() );
aGroupDS->SMDSGroup() = std::move( *aGroup );
aGroupDS->SetStoreName( aName.c_str() );
AddGroup( aGroupDS );
_isShapeToMesh = false;
DriverMED_R_SMESHDS_Mesh myReader;
- myReader.SetMesh(_myMeshDS);
+ myReader.SetMesh(_meshDS);
myReader.SetMeshId(-1);
myReader.SetFile(theFileName);
myReader.SetMeshName(theMeshName);
}
}
- _myMeshDS->Modified();
- _myMeshDS->CompactMesh();
+ _meshDS->Modified();
+ _meshDS->CompactMesh();
return (int) status;
}
_isShapeToMesh = false;
DriverSTL_R_SMDS_Mesh myReader;
- myReader.SetMesh(_myMeshDS);
+ myReader.SetMesh(_meshDS);
myReader.SetFile(theFileName);
myReader.SetMeshId(-1);
myReader.Perform();
#ifdef WITH_CGNS
DriverCGNS_Read myReader;
- myReader.SetMesh(_myMeshDS);
+ myReader.SetMesh(_meshDS);
myReader.SetFile(theFileName);
myReader.SetMeshId(theMeshIndex);
res = myReader.Perform();
bool theMakeRequiredGroups)
{
DriverGMF_Read myReader;
- myReader.SetMesh(_myMeshDS);
+ myReader.SetMesh(_meshDS);
myReader.SetFile(theFileName);
myReader.SetMakeRequiredGroups( theMakeRequiredGroups );
myReader.Perform();
//=============================================================================
/*!
- *
+ *
*/
//=============================================================================
SMESH_Hypothesis::Hypothesis_Status
SMESH_Mesh::AddHypothesis(const TopoDS_Shape & aSubShape,
int anHypId,
- std::string* anError ) throw(SALOME_Exception)
+ std::string* anError )
{
- Unexpect aCatch(SalomeException);
if(MYDEBUG) MESSAGE("SMESH_Mesh::AddHypothesis");
if ( anError )
//=============================================================================
/*!
- *
+ *
*/
//=============================================================================
SMESH_Hypothesis::Hypothesis_Status
SMESH_Mesh::RemoveHypothesis(const TopoDS_Shape & aSubShape,
- int anHypId) throw( SALOME_Exception )
+ int anHypId)
{
- Unexpect aCatch(SalomeException);
if(MYDEBUG) MESSAGE("SMESH_Mesh::RemoveHypothesis");
StudyContextStruct *sc = _gen->GetStudyContext();
SMESH_Hypothesis *anHyp = sc->mapHypothesis[anHypId];
if(MYDEBUG) { SCRUTE(anHyp->GetType()); }
- // shape
+ // shape
bool isAlgo = ( !anHyp->GetType() == SMESHDS_Hypothesis::PARAM_ALGO );
SMESH_subMesh::algo_event event = isAlgo ? SMESH_subMesh::REMOVE_ALGO : SMESH_subMesh::REMOVE_HYP;
//=============================================================================
/*!
- *
+ *
*/
//=============================================================================
const std::list<const SMESHDS_Hypothesis*>&
SMESH_Mesh::GetHypothesisList(const TopoDS_Shape & aSubShape) const
- throw(SALOME_Exception)
{
- return _myMeshDS->GetHypothesis(aSubShape);
+ return _meshDS->GetHypothesis(aSubShape);
}
//=======================================================================
{
const TopoDS_Shape & aSubShape = aSubMesh->GetSubShape();
- const std::list<const SMESHDS_Hypothesis*>& hypList = _myMeshDS->GetHypothesis(aSubShape);
+ const std::list<const SMESHDS_Hypothesis*>& hypList = _meshDS->GetHypothesis(aSubShape);
std::list<const SMESHDS_Hypothesis*>::const_iterator hyp = hypList.begin();
for ( ; hyp != hypList.end(); hyp++ ) {
const SMESH_Hypothesis * h = cSMESH_Hyp( *hyp );
const_cast< std::vector< SMESH_subMesh * > & > ( aSubMesh->GetAncestors() );
SortByMeshOrder( ancestors );
- std::vector<SMESH_subMesh*>::const_iterator smIt = ancestors.begin();
+ std::vector<SMESH_subMesh*>::const_iterator smIt = ancestors.begin();
for ( ; smIt != ancestors.end(); smIt++ )
{
const TopoDS_Shape& curSh = (*smIt)->GetSubShape();
- const std::list<const SMESHDS_Hypothesis*>& hypList = _myMeshDS->GetHypothesis(curSh);
+ const std::list<const SMESHDS_Hypothesis*>& hypList = _meshDS->GetHypothesis(curSh);
std::list<const SMESHDS_Hypothesis*>::const_iterator hyp = hypList.begin();
for ( ; hyp != hypList.end(); hyp++ ) {
const SMESH_Hypothesis * h = cSMESH_Hyp( *hyp );
// get hypos from aSubShape
{
const TopoDS_Shape & aSubShape = aSubMesh->GetSubShape();
- const std::list<const SMESHDS_Hypothesis*>& hypList = _myMeshDS->GetHypothesis(aSubShape);
+ const std::list<const SMESHDS_Hypothesis*>& hypList = _meshDS->GetHypothesis(aSubShape);
for ( hyp = hypList.begin(); hyp != hypList.end(); hyp++ )
{
const SMESH_Hypothesis* h = cSMESH_Hyp( *hyp );
for ( ; smIt != ancestors.end(); smIt++ )
{
const TopoDS_Shape& curSh = (*smIt)->GetSubShape();
- const std::list<const SMESHDS_Hypothesis*>& hypList = _myMeshDS->GetHypothesis(curSh);
+ const std::list<const SMESHDS_Hypothesis*>& hypList = _meshDS->GetHypothesis(curSh);
for ( hyp = hypList.begin(); hyp != hypList.end(); hyp++ )
{
const SMESH_Hypothesis* h = cSMESH_Hyp( *hyp );
//=============================================================================
/*!
- *
+ *
*/
//=============================================================================
-const std::list<SMESHDS_Command*> & SMESH_Mesh::GetLog() throw(SALOME_Exception)
+const std::list<SMESHDS_Command*> & SMESH_Mesh::GetLog()
{
- Unexpect aCatch(SalomeException);
- return _myMeshDS->GetScript()->GetCommands();
+ return _meshDS->GetScript()->GetCommands();
}
//=============================================================================
/*!
- *
+ *
*/
//=============================================================================
-void SMESH_Mesh::ClearLog() throw(SALOME_Exception)
+void SMESH_Mesh::ClearLog()
{
- Unexpect aCatch(SalomeException);
- _myMeshDS->GetScript()->Clear();
+ _meshDS->GetScript()->Clear();
}
//=============================================================================
//=============================================================================
SMESH_subMesh * SMESH_Mesh::GetSubMesh(const TopoDS_Shape & aSubShape)
- throw(SALOME_Exception)
{
- int index = _myMeshDS->ShapeToIndex(aSubShape);
+ int index = _meshDS->ShapeToIndex(aSubShape);
if ( !index && aSubShape.IsNull() )
return 0;
TopoDS_Iterator it( aSubShape );
if ( it.More() )
{
- index = _myMeshDS->AddCompoundSubmesh( aSubShape, it.Value().ShapeType() );
+ index = _meshDS->AddCompoundSubmesh( aSubShape, it.Value().ShapeType() );
// fill map of Ancestors
while ( _nbSubShapes < index )
- fillAncestorsMap( _myMeshDS->IndexToShape( ++_nbSubShapes ));
+ fillAncestorsMap( _meshDS->IndexToShape( ++_nbSubShapes ));
}
}
// if ( !index )
SMESH_subMesh* aSubMesh = _subMeshHolder->Get( index );
if ( !aSubMesh )
{
- aSubMesh = new SMESH_subMesh(index, this, _myMeshDS, aSubShape);
+ aSubMesh = new SMESH_subMesh(index, this, _meshDS, aSubShape);
_subMeshHolder->Add( index, aSubMesh );
// include non-computable sub-meshes in SMESH_subMesh::_ancestors of sub-submeshes
//=============================================================================
SMESH_subMesh *SMESH_Mesh::GetSubMeshContaining(const TopoDS_Shape & aSubShape) const
- throw(SALOME_Exception)
{
- int index = _myMeshDS->ShapeToIndex(aSubShape);
+ int index = _meshDS->ShapeToIndex(aSubShape);
return GetSubMeshContaining( index );
}
//=============================================================================
SMESH_subMesh *SMESH_Mesh::GetSubMeshContaining(const int aShapeID) const
-throw(SALOME_Exception)
{
SMESH_subMesh *aSubMesh = _subMeshHolder->Get( aShapeID );
-
return aSubMesh;
}
std::list<SMESH_subMesh*>
SMESH_Mesh::GetGroupSubMeshesContaining(const TopoDS_Shape & aSubShape) const
- throw(SALOME_Exception)
{
std::list<SMESH_subMesh*> found;
// algorithm parameter
if (algo)
{
- // look trough hypotheses used by algo
+ // look through hypotheses used by algo
const SMESH_HypoFilter* hypoKind;
if (( hypoKind = algo->GetCompatibleHypoFilter( !hyp->IsAuxiliary() ))) {
std::list <const SMESHDS_Hypothesis * > usedHyps;
void SMESH_Mesh::NotifySubMeshesHypothesisModification(const SMESH_Hypothesis* hyp)
{
- Unexpect aCatch(SalomeException);
if ( !GetMeshDS()->IsUsedHypothesis( hyp ))
return;
- int nbEntities = ( _myMeshDS->NbNodes() + _myMeshDS->NbElements() );
+ smIdType nbEntities = ( _meshDS->NbNodes() + _meshDS->NbElements() );
if ( hyp && _callUp && !_callUp->IsLoaded() ) // for not loaded mesh (#16648)
{
_callUp->HypothesisModified( hyp->GetID(), /*updateIcons=*/true );
- nbEntities = ( _myMeshDS->NbNodes() + _myMeshDS->NbElements() ); // after loading mesh
+ nbEntities = ( _meshDS->NbNodes() + _meshDS->NbElements() ); // after loading mesh
}
SMESH_Algo *algo;
HasModificationsToDiscard(); // to reset _isModified flag if mesh becomes empty
GetMeshDS()->Modified();
- int newNbEntities = ( _myMeshDS->NbNodes() + _myMeshDS->NbElements() );
+ smIdType newNbEntities = ( _meshDS->NbNodes() + _meshDS->NbElements() );
if ( hyp && _callUp )
_callUp->HypothesisModified( hyp->GetID(), newNbEntities != nbEntities );
}
* Auto color functionality
*/
//=============================================================================
-void SMESH_Mesh::SetAutoColor(bool theAutoColor) throw(SALOME_Exception)
+void SMESH_Mesh::SetAutoColor(bool theAutoColor)
{
- Unexpect aCatch(SalomeException);
_isAutoColor = theAutoColor;
}
-bool SMESH_Mesh::GetAutoColor() throw(SALOME_Exception)
+bool SMESH_Mesh::GetAutoColor()
{
- Unexpect aCatch(SalomeException);
return _isAutoColor;
}
//================================================================================
/*!
- * \brief Export the mesh to a med file
- * \param [in] file - name of the MED file
- * \param [in] theMeshName - name of this mesh
- * \param [in] theAutoGroups - boolean parameter for creating/not creating
- * the groups Group_On_All_Nodes, Group_On_All_Faces, ... ;
- * the typical use is auto_groups=false.
- * \param [in] theMinor - define the minor version (y, where version is x.y.z) of MED file format.
- * The theMinor must be between 0 and the current minor version of MED file library.
- * If theMinor is equal to -1, the minor version is not changed (default).
- * The major version (x, where version is x.y.z) cannot be changed.
- * \param [in] meshPart - mesh data to export
- * \param [in] theAutoDimension - if \c true, a space dimension of a MED mesh can be either
- * - 1D if all mesh nodes lie on OX coordinate axis, or
- * - 2D if all mesh nodes lie on XOY coordinate plane, or
- * - 3D in the rest cases.
- * If \a theAutoDimension is \c false, the space dimension is always 3.
- * \param [in] theAddODOnVertices - to create 0D elements on all vertices
- * \param [in] theAllElemsToGroup - to make every element to belong to any group (PAL23413)
- * \param [in] ZTolerance - tolerance in Z direction. If Z coordinate of a node is close to zero
- * within a given tolerance, the coordinate is set to zero.
- * If \a ZTolerance is negative, the node coordinates are kept as is.
- * \return int - mesh index in the file
+ * \brief Export the mesh to a writer
*/
//================================================================================
-void SMESH_Mesh::ExportMED(const char * file,
- const char* theMeshName,
- bool theAutoGroups,
- int theVersion,
- const SMESHDS_Mesh* meshPart,
- bool theAutoDimension,
- bool theAddODOnVertices,
- double theZTolerance,
- bool theAllElemsToGroup)
-throw(SALOME_Exception)
+void SMESH_Mesh::exportMEDCommmon(DriverMED_W_SMESHDS_Mesh& theWriter,
+ const char* theMeshName,
+ bool theAutoGroups,
+ const SMESHDS_Mesh* theMeshPart,
+ bool theAutoDimension,
+ bool theAddODOnVertices,
+ double theZTolerance,
+ bool theSaveNumbers)
{
- MESSAGE("MED_VERSION:"<< theVersion);
+ Driver_Mesh::Status status = Driver_Mesh::DRS_OK;
+
SMESH_TRY;
- DriverMED_W_SMESHDS_Mesh myWriter;
- myWriter.SetFile ( file , theVersion);
- myWriter.SetMesh ( meshPart ? (SMESHDS_Mesh*) meshPart : _myMeshDS );
- myWriter.SetAutoDimension( theAutoDimension );
- myWriter.AddODOnVertices ( theAddODOnVertices );
- myWriter.SetZTolerance ( theZTolerance );
+ theWriter.SetMesh ( theMeshPart ? (SMESHDS_Mesh*) theMeshPart : _meshDS );
+ theWriter.SetAutoDimension( theAutoDimension );
+ theWriter.AddODOnVertices ( theAddODOnVertices );
+ theWriter.SetZTolerance ( theZTolerance );
+ theWriter.SetSaveNumbers ( theSaveNumbers );
if ( !theMeshName )
- myWriter.SetMeshId ( _id );
+ theWriter.SetMeshId ( _id );
else {
- myWriter.SetMeshId ( -1 );
- myWriter.SetMeshName ( theMeshName );
+ theWriter.SetMeshId ( -1 );
+ theWriter.SetMeshName ( theMeshName );
}
if ( theAutoGroups ) {
- myWriter.AddGroupOfNodes();
- myWriter.AddGroupOfEdges();
- myWriter.AddGroupOfFaces();
- myWriter.AddGroupOfVolumes();
- myWriter.AddGroupOf0DElems();
- myWriter.AddGroupOfBalls();
+ theWriter.AddGroupOfNodes();
+ theWriter.AddGroupOfEdges();
+ theWriter.AddGroupOfFaces();
+ theWriter.AddGroupOfVolumes();
+ theWriter.AddGroupOf0DElems();
+ theWriter.AddGroupOfBalls();
}
- if ( theAllElemsToGroup )
- myWriter.AddAllToGroup();
// Pass groups to writer. Provide unique group names.
//set<string> aGroupNames; // Corrected for Mantis issue 0020028
- if ( !meshPart )
+ if ( !theMeshPart )
{
std::map< SMDSAbs_ElementType, std::set<std::string> > aGroupNames;
char aString [256];
aGroupName.resize(MAX_MED_GROUP_NAME_LENGTH);
}
aGroupDS->SetStoreName( aGroupName.c_str() );
- myWriter.AddGroup( aGroupDS );
+ theWriter.AddGroup( aGroupDS );
}
}
}
// Perform export
- myWriter.Perform();
+ status = theWriter.Perform();
SMESH_CATCH( SMESH::throwSalomeEx );
+
+ if ( status == Driver_Mesh::DRS_TOO_LARGE_MESH )
+ throw TooLargeForExport("MED");
}
//================================================================================
/*!
- * \brief Export the mesh to a SAUV file
+ * Same as SMESH_Mesh::ExportMED except for \a file and \a theVersion
*/
//================================================================================
-void SMESH_Mesh::ExportSAUV(const char *file,
- const char* theMeshName,
- bool theAutoGroups)
- throw(SALOME_Exception)
+MEDCoupling::MCAuto<MEDCoupling::DataArrayByte>
+SMESH_Mesh::ExportMEDCoupling(const char* theMeshName,
+ bool theAutoGroups,
+ const SMESHDS_Mesh* theMeshPart,
+ bool theAutoDimension,
+ bool theAddODOnVertices,
+ double theZTolerance,
+ bool theSaveNumbers)
{
- std::string medfilename(file);
- medfilename += ".med";
- std::string cmd;
-#ifdef WIN32
- cmd = "%PYTHONBIN% ";
-#else
- cmd = "python3 ";
-#endif
- cmd += "-c \"";
- cmd += "from medutilities import my_remove ; my_remove(r'" + medfilename + "')";
- cmd += "\"";
- system(cmd.c_str());
- ExportMED(medfilename.c_str(), theMeshName, theAutoGroups, /*minor=*/-1,
- /*meshPart=*/NULL, /*theAutoDimension=*/false, /*theAddODOnVertices=*/false,
- /*zTol=*/-1, /*theAllElemsToGroup=*/true ); // theAllElemsToGroup is for PAL0023413
-#ifdef WIN32
- cmd = "%PYTHONBIN% ";
-#else
- cmd = "python3 ";
-#endif
- cmd += "-c \"";
- cmd += "from medutilities import convert ; convert(r'" + medfilename + "', 'MED', 'GIBI', 1, r'" + file + "')";
- cmd += "\"";
- system(cmd.c_str());
-#ifdef WIN32
- cmd = "%PYTHONBIN% ";
-#else
- cmd = "python3 ";
-#endif
- cmd += "-c \"";
- cmd += "from medutilities import my_remove ; my_remove(r'" + medfilename + "')";
- cmd += "\"";
- system(cmd.c_str());
+ DriverMED_W_SMESHDS_Mesh_Mem writer;
+ this->exportMEDCommmon( writer, theMeshName, theAutoGroups, theMeshPart, theAutoDimension,
+ theAddODOnVertices, theZTolerance, theSaveNumbers);
+ return writer.getData();
+}
+
+//================================================================================
+/*!
+ * \brief Export the mesh to a med file
+ * \param [in] theFile - name of the MED file
+ * \param [in] theMeshName - name of this mesh
+ * \param [in] theAutoGroups - boolean parameter for creating/not creating
+ * the groups Group_On_All_Nodes, Group_On_All_Faces, ... ;
+ * the typical use is auto_groups=false.
+ * \param [in] theVersion - define the minor (xy, where version is x.y.z) of MED file format.
+ * If theVersion is equal to -1, the minor version is not changed (default).
+ * \param [in] theMeshPart - mesh data to export
+ * \param [in] theAutoDimension - if \c true, a space dimension of a MED mesh can be either
+ * - 1D if all mesh nodes lie on OX coordinate axis, or
+ * - 2D if all mesh nodes lie on XOY coordinate plane, or
+ * - 3D in the rest cases.
+ * If \a theAutoDimension is \c false, the space dimension is always 3.
+ * \param [in] theAddODOnVertices - to create 0D elements on all vertices
+ * \param [in] theZTolerance - tolerance in Z direction. If Z coordinate of a node is close to zero
+ * within a given tolerance, the coordinate is set to zero.
+ * If \a ZTolerance is negative, the node coordinates are kept as is.
+ * \param [in] theSaveNumbers : enable saving numbers of nodes and cells.
+ * \return int - mesh index in the file
+ */
+//================================================================================
+
+void SMESH_Mesh::ExportMED(const char * theFile,
+ const char* theMeshName,
+ bool theAutoGroups,
+ int theVersion,
+ const SMESHDS_Mesh* theMeshPart,
+ bool theAutoDimension,
+ bool theAddODOnVertices,
+ double theZTolerance,
+ bool theSaveNumbers)
+{
+ MESSAGE("MED_VERSION:"<< theVersion);
+ DriverMED_W_SMESHDS_Mesh writer;
+ writer.SetFile( theFile, theVersion );
+ this->exportMEDCommmon( writer, theMeshName, theAutoGroups, theMeshPart, theAutoDimension, theAddODOnVertices, theZTolerance, theSaveNumbers );
}
//================================================================================
//================================================================================
void SMESH_Mesh::ExportDAT(const char * file,
- const SMESHDS_Mesh* meshPart) throw(SALOME_Exception)
+ const SMESHDS_Mesh* meshPart,
+ const bool renumber)
{
- Unexpect aCatch(SalomeException);
- DriverDAT_W_SMDS_Mesh myWriter;
- myWriter.SetFile( file );
- myWriter.SetMesh( meshPart ? (SMESHDS_Mesh*) meshPart : _myMeshDS );
- myWriter.SetMeshId(_id);
- myWriter.Perform();
+ Driver_Mesh::Status status;
+ SMESH_TRY;
+
+ DriverDAT_W_SMDS_Mesh writer;
+ writer.SetFile( file );
+ writer.SetMesh( meshPart ? (SMESHDS_Mesh*) meshPart : _meshDS );
+ writer.SetMeshId(_id);
+ writer.SetRenumber( renumber );
+ status = writer.Perform();
+
+ SMESH_CATCH( SMESH::throwSalomeEx );
+
+ if ( status == Driver_Mesh::DRS_TOO_LARGE_MESH )
+ throw TooLargeForExport("DAT");
}
//================================================================================
//================================================================================
void SMESH_Mesh::ExportUNV(const char * file,
- const SMESHDS_Mesh* meshPart) throw(SALOME_Exception)
+ const SMESHDS_Mesh* meshPart,
+ const bool renumber)
{
- Unexpect aCatch(SalomeException);
- DriverUNV_W_SMDS_Mesh myWriter;
- myWriter.SetFile( file );
- myWriter.SetMesh( meshPart ? (SMESHDS_Mesh*) meshPart : _myMeshDS );
- myWriter.SetMeshId(_id);
- // myWriter.SetGroups(_mapGroup);
+ Driver_Mesh::Status status;
+
+ SMESH_TRY;
+ DriverUNV_W_SMDS_Mesh writer;
+ writer.SetFile( file );
+ writer.SetMesh( meshPart ? (SMESHDS_Mesh*) meshPart : _meshDS );
+ writer.SetMeshId(_id);
+ writer.SetRenumber( renumber );
// pass group names to SMESHDS
if ( !meshPart )
if ( aGroupDS ) {
std::string aGroupName = aGroup->GetName();
aGroupDS->SetStoreName( aGroupName.c_str() );
- myWriter.AddGroup( aGroupDS );
+ writer.AddGroup( aGroupDS );
}
}
}
- myWriter.Perform();
+ status = writer.Perform();
+
+ SMESH_CATCH( SMESH::throwSalomeEx );
+
+ if ( status == Driver_Mesh::DRS_TOO_LARGE_MESH )
+ throw TooLargeForExport("UNV");
}
//================================================================================
void SMESH_Mesh::ExportSTL(const char * file,
const bool isascii,
const char * name,
- const SMESHDS_Mesh* meshPart) throw(SALOME_Exception)
+ const SMESHDS_Mesh* meshPart)
{
- Unexpect aCatch(SalomeException);
- DriverSTL_W_SMDS_Mesh myWriter;
- myWriter.SetFile( file );
- myWriter.SetIsAscii( isascii );
- myWriter.SetMesh( meshPart ? (SMESHDS_Mesh*) meshPart : _myMeshDS);
- myWriter.SetMeshId(_id);
- if ( name ) myWriter.SetName( name );
- myWriter.Perform();
+ Driver_Mesh::Status status;
+ SMESH_TRY;
+
+ DriverSTL_W_SMDS_Mesh writer;
+ writer.SetFile( file );
+ writer.SetIsAscii( isascii );
+ writer.SetMesh( meshPart ? (SMESHDS_Mesh*) meshPart : _meshDS);
+ writer.SetMeshId(_id);
+ if ( name ) writer.SetName( name );
+ status = writer.Perform();
+
+ SMESH_CATCH( SMESH::throwSalomeEx );
+
+ if ( status == Driver_Mesh::DRS_TOO_LARGE_MESH )
+ throw TooLargeForExport("STL");
}
//================================================================================
const char * meshName,
const bool groupElemsByType)
{
+
int res = Driver_Mesh::DRS_FAIL;
+ SMESH_TRY;
// pass group names to SMESHDS
std::map<int, SMESH_Group*>::iterator it = _mapGroup.begin();
}
#ifdef WITH_CGNS
- DriverCGNS_Write myWriter;
- myWriter.SetFile( file );
- myWriter.SetMesh( const_cast<SMESHDS_Mesh*>( meshDS ));
- myWriter.SetMeshName( SMESH_Comment("Mesh_") << meshDS->GetPersistentId());
+ DriverCGNS_Write writer;
+ writer.SetFile( file );
+ writer.SetMesh( const_cast<SMESHDS_Mesh*>( meshDS ));
+ writer.SetMeshName( SMESH_Comment("Mesh_") << meshDS->GetPersistentId());
if ( meshName && meshName[0] )
- myWriter.SetMeshName( meshName );
- myWriter.SetElementsByType( groupElemsByType );
- res = myWriter.Perform();
+ writer.SetMeshName( meshName );
+ writer.SetElementsByType( groupElemsByType );
+ res = writer.Perform();
if ( res != Driver_Mesh::DRS_OK )
{
- SMESH_ComputeErrorPtr err = myWriter.GetError();
+ SMESH_ComputeErrorPtr err = writer.GetError();
if ( err && !err->IsOK() && !err->myComment.empty() )
throw SALOME_Exception(("Export failed: " + err->myComment ).c_str() );
}
#endif
+ SMESH_CATCH( SMESH::throwSalomeEx );
+
+ if ( res == Driver_Mesh::DRS_TOO_LARGE_MESH )
+ throw TooLargeForExport("CGNS");
+
if ( res != Driver_Mesh::DRS_OK )
throw SALOME_Exception("Export failed");
}
const SMESHDS_Mesh* meshDS,
bool withRequiredGroups)
{
- DriverGMF_Write myWriter;
- myWriter.SetFile( file );
- myWriter.SetMesh( const_cast<SMESHDS_Mesh*>( meshDS ));
- myWriter.SetExportRequiredGroups( withRequiredGroups );
+ Driver_Mesh::Status status;
+ SMESH_TRY;
+
+ DriverGMF_Write writer;
+ writer.SetFile( file );
+ writer.SetMesh( const_cast<SMESHDS_Mesh*>( meshDS ));
+ writer.SetExportRequiredGroups( withRequiredGroups );
+
+ status = writer.Perform();
- myWriter.Perform();
+ SMESH_CATCH( SMESH::throwSalomeEx );
+
+ if ( status == Driver_Mesh::DRS_TOO_LARGE_MESH )
+ throw TooLargeForExport("GMF");
}
//================================================================================
const SMESH_subMesh* curSM = _gen->GetCurrentSubMesh();
// get progress of a current algo
- TColStd_MapOfInteger currentSubIds;
+ TColStd_MapOfInteger currentSubIds;
if ( curSM )
if ( SMESH_Algo* algo = curSM->GetAlgo() )
{
*/
//================================================================================
-int SMESH_Mesh::NbNodes() const throw(SALOME_Exception)
+smIdType SMESH_Mesh::NbNodes() const
{
- Unexpect aCatch(SalomeException);
- return _myMeshDS->NbNodes();
+ return _meshDS->NbNodes();
}
//================================================================================
*/
//================================================================================
-int SMESH_Mesh::Nb0DElements() const throw(SALOME_Exception)
+smIdType SMESH_Mesh::Nb0DElements() const
{
- Unexpect aCatch(SalomeException);
- return _myMeshDS->GetMeshInfo().Nb0DElements();
+ return _meshDS->GetMeshInfo().Nb0DElements();
}
//================================================================================
*/
//================================================================================
-int SMESH_Mesh::NbEdges(SMDSAbs_ElementOrder order) const throw(SALOME_Exception)
+smIdType SMESH_Mesh::NbEdges(SMDSAbs_ElementOrder order) const
{
- Unexpect aCatch(SalomeException);
- return _myMeshDS->GetMeshInfo().NbEdges(order);
+ return _meshDS->GetMeshInfo().NbEdges(order);
}
//================================================================================
*/
//================================================================================
-int SMESH_Mesh::NbFaces(SMDSAbs_ElementOrder order) const throw(SALOME_Exception)
+smIdType SMESH_Mesh::NbFaces(SMDSAbs_ElementOrder order) const
{
- Unexpect aCatch(SalomeException);
- return _myMeshDS->GetMeshInfo().NbFaces(order);
+ return _meshDS->GetMeshInfo().NbFaces(order);
}
//================================================================================
*/
//================================================================================
-int SMESH_Mesh::NbTriangles(SMDSAbs_ElementOrder order) const throw(SALOME_Exception)
+smIdType SMESH_Mesh::NbTriangles(SMDSAbs_ElementOrder order) const
{
- Unexpect aCatch(SalomeException);
- return _myMeshDS->GetMeshInfo().NbTriangles(order);
+ return _meshDS->GetMeshInfo().NbTriangles(order);
}
//================================================================================
*/
//================================================================================
-int SMESH_Mesh::NbBiQuadTriangles() const throw(SALOME_Exception)
+smIdType SMESH_Mesh::NbBiQuadTriangles() const
{
- Unexpect aCatch(SalomeException);
- return _myMeshDS->GetMeshInfo().NbBiQuadTriangles();
+ return _meshDS->GetMeshInfo().NbBiQuadTriangles();
}
//================================================================================
*/
//================================================================================
-int SMESH_Mesh::NbQuadrangles(SMDSAbs_ElementOrder order) const throw(SALOME_Exception)
+smIdType SMESH_Mesh::NbQuadrangles(SMDSAbs_ElementOrder order) const
{
- Unexpect aCatch(SalomeException);
- return _myMeshDS->GetMeshInfo().NbQuadrangles(order);
+ return _meshDS->GetMeshInfo().NbQuadrangles(order);
}
//================================================================================
*/
//================================================================================
-int SMESH_Mesh::NbBiQuadQuadrangles() const throw(SALOME_Exception)
+smIdType SMESH_Mesh::NbBiQuadQuadrangles() const
{
- Unexpect aCatch(SalomeException);
- return _myMeshDS->GetMeshInfo().NbBiQuadQuadrangles();
+ return _meshDS->GetMeshInfo().NbBiQuadQuadrangles();
}
//================================================================================
*/
//================================================================================
-int SMESH_Mesh::NbPolygons(SMDSAbs_ElementOrder order) const throw(SALOME_Exception)
+smIdType SMESH_Mesh::NbPolygons(SMDSAbs_ElementOrder order) const
{
- Unexpect aCatch(SalomeException);
- return _myMeshDS->GetMeshInfo().NbPolygons(order);
+ return _meshDS->GetMeshInfo().NbPolygons(order);
}
//================================================================================
*/
//================================================================================
-int SMESH_Mesh::NbVolumes(SMDSAbs_ElementOrder order) const throw(SALOME_Exception)
+smIdType SMESH_Mesh::NbVolumes(SMDSAbs_ElementOrder order) const
{
- Unexpect aCatch(SalomeException);
- return _myMeshDS->GetMeshInfo().NbVolumes(order);
+ return _meshDS->GetMeshInfo().NbVolumes(order);
}
//================================================================================
*/
//================================================================================
-int SMESH_Mesh::NbTetras(SMDSAbs_ElementOrder order) const throw(SALOME_Exception)
+smIdType SMESH_Mesh::NbTetras(SMDSAbs_ElementOrder order) const
{
- Unexpect aCatch(SalomeException);
- return _myMeshDS->GetMeshInfo().NbTetras(order);
+ return _meshDS->GetMeshInfo().NbTetras(order);
}
//================================================================================
*/
//================================================================================
-int SMESH_Mesh::NbHexas(SMDSAbs_ElementOrder order) const throw(SALOME_Exception)
+smIdType SMESH_Mesh::NbHexas(SMDSAbs_ElementOrder order) const
{
- Unexpect aCatch(SalomeException);
- return _myMeshDS->GetMeshInfo().NbHexas(order);
+ return _meshDS->GetMeshInfo().NbHexas(order);
}
//================================================================================
*/
//================================================================================
-int SMESH_Mesh::NbTriQuadraticHexas() const throw(SALOME_Exception)
+smIdType SMESH_Mesh::NbTriQuadraticHexas() const
{
- Unexpect aCatch(SalomeException);
- return _myMeshDS->GetMeshInfo().NbTriQuadHexas();
+ return _meshDS->GetMeshInfo().NbTriQuadHexas();
}
//================================================================================
*/
//================================================================================
-int SMESH_Mesh::NbPyramids(SMDSAbs_ElementOrder order) const throw(SALOME_Exception)
+smIdType SMESH_Mesh::NbPyramids(SMDSAbs_ElementOrder order) const
{
- Unexpect aCatch(SalomeException);
- return _myMeshDS->GetMeshInfo().NbPyramids(order);
+ return _meshDS->GetMeshInfo().NbPyramids(order);
}
//================================================================================
*/
//================================================================================
-int SMESH_Mesh::NbPrisms(SMDSAbs_ElementOrder order) const throw(SALOME_Exception)
+smIdType SMESH_Mesh::NbPrisms(SMDSAbs_ElementOrder order) const
{
- Unexpect aCatch(SalomeException);
- return _myMeshDS->GetMeshInfo().NbPrisms(order);
+ return _meshDS->GetMeshInfo().NbPrisms(order);
}
-int SMESH_Mesh::NbQuadPrisms() const throw (SALOME_Exception)
+smIdType SMESH_Mesh::NbQuadPrisms() const
{
- Unexpect aCatch(SalomeException);
- return _myMeshDS->GetMeshInfo().NbQuadPrisms();
+ return _meshDS->GetMeshInfo().NbQuadPrisms();
}
-int SMESH_Mesh::NbBiQuadPrisms() const throw (SALOME_Exception)
+smIdType SMESH_Mesh::NbBiQuadPrisms() const
{
- Unexpect aCatch(SalomeException);
- return _myMeshDS->GetMeshInfo().NbBiQuadPrisms();
+ return _meshDS->GetMeshInfo().NbBiQuadPrisms();
}
*/
//================================================================================
-int SMESH_Mesh::NbHexagonalPrisms() const throw(SALOME_Exception)
+smIdType SMESH_Mesh::NbHexagonalPrisms() const
{
- Unexpect aCatch(SalomeException);
- return _myMeshDS->GetMeshInfo().NbHexPrisms();
+ return _meshDS->GetMeshInfo().NbHexPrisms();
}
//================================================================================
*/
//================================================================================
-int SMESH_Mesh::NbPolyhedrons() const throw(SALOME_Exception)
+smIdType SMESH_Mesh::NbPolyhedrons() const
{
- Unexpect aCatch(SalomeException);
- return _myMeshDS->GetMeshInfo().NbPolyhedrons();
+ return _meshDS->GetMeshInfo().NbPolyhedrons();
}
//================================================================================
*/
//================================================================================
-int SMESH_Mesh::NbBalls() const throw(SALOME_Exception)
+smIdType SMESH_Mesh::NbBalls() const
{
- Unexpect aCatch(SalomeException);
- return _myMeshDS->GetMeshInfo().NbBalls();
+ return _meshDS->GetMeshInfo().NbBalls();
}
//================================================================================
*/
//================================================================================
-int SMESH_Mesh::NbSubMesh() const throw(SALOME_Exception)
+smIdType SMESH_Mesh::NbSubMesh() const
{
- Unexpect aCatch(SalomeException);
- return _myMeshDS->NbSubMesh();
+ return _meshDS->NbSubMesh();
}
//================================================================================
int SMESH_Mesh::NbMeshes() const // nb meshes in the Study
{
- return _myDocument->NbMeshes();
+ return _document->NbMeshes();
}
//=======================================================================
if(MYDEBUG) MESSAGE("SMESH_Mesh::IsNotConformAllowed");
static SMESH_HypoFilter filter( SMESH_HypoFilter::HasName( "NotConformAllowed" ));
- return GetHypothesis( _myMeshDS->ShapeToMesh(), filter, false );
+ return GetHypothesis( _meshDS->ShapeToMesh(), filter, false );
}
//=======================================================================
//function : IsMainShape
-//purpose :
+//purpose :
//=======================================================================
bool SMESH_Mesh::IsMainShape(const TopoDS_Shape& theShape) const
{
- return theShape.IsSame(_myMeshDS->ShapeToMesh() );
+ return theShape.IsSame(_meshDS->ShapeToMesh() );
+}
+
+//=======================================================================
+//function : GetShapeByEntry
+//purpose : return TopoDS_Shape by its study entry
+//=======================================================================
+
+TopoDS_Shape SMESH_Mesh::GetShapeByEntry(const std::string& entry) const
+{
+ return _callUp ? _callUp->GetShapeByEntry( entry ) : TopoDS_Shape();
}
//=============================================================================
/*!
- *
+ *
*/
//=============================================================================
*/
//================================================================================
-SMESH_Group* SMESH_Mesh::AddGroup (SMESHDS_GroupBase* groupDS) throw(SALOME_Exception)
+SMESH_Group* SMESH_Mesh::AddGroup (SMESHDS_GroupBase* groupDS)
{
if ( !groupDS )
throw SALOME_Exception(LOCALIZED ("SMESH_Mesh::AddGroup(): NULL SMESHDS_GroupBase"));
bool SMESH_Mesh::SynchronizeGroups()
{
const size_t nbGroups = _mapGroup.size();
- const std::set<SMESHDS_GroupBase*>& groups = _myMeshDS->GetGroups();
+ const std::set<SMESHDS_GroupBase*>& groups = _meshDS->GetGroups();
std::set<SMESHDS_GroupBase*>::const_iterator gIt = groups.begin();
for ( ; gIt != groups.end(); ++gIt )
{
std::map<int, SMESH_Group*>::const_iterator it = _mapGroup.begin();
for ( ; it != _mapGroup.end(); it++ )
anIds.push_back( it->first );
-
+
return anIds;
}
//=============================================================================
/*!
- *
+ *
*/
//=============================================================================
save << ++clause << ") Total number of " << orderStr << " edges:\t" << NbEdges(order) << endl;
save << ++clause << ") Total number of " << orderStr << " faces:\t" << NbFaces(order) << endl;
if ( NbFaces(order) > 0 ) {
- int nb3 = NbTriangles(order);
- int nb4 = NbQuadrangles(order);
+ smIdType nb3 = NbTriangles(order);
+ smIdType nb4 = NbQuadrangles(order);
save << clause << ".1) Number of " << orderStr << " triangles: \t" << nb3 << endl;
save << clause << ".2) Number of " << orderStr << " quadrangles:\t" << nb4 << endl;
if ( nb3 + nb4 != NbFaces(order) ) {
std::map<int,int> myFaceMap;
- SMDS_FaceIteratorPtr itFaces=_myMeshDS->facesIterator();
+ SMDS_FaceIteratorPtr itFaces=_meshDS->facesIterator();
while( itFaces->more( ) ) {
int nbNodes = itFaces->next()->NbNodes();
if ( myFaceMap.find( nbNodes ) == myFaceMap.end() )
}
save << ++clause << ") Total number of " << orderStr << " volumes:\t" << NbVolumes(order) << endl;
if ( NbVolumes(order) > 0 ) {
- int nb8 = NbHexas(order);
- int nb4 = NbTetras(order);
- int nb5 = NbPyramids(order);
- int nb6 = NbPrisms(order);
+ smIdType nb8 = NbHexas(order);
+ smIdType nb4 = NbTetras(order);
+ smIdType nb5 = NbPyramids(order);
+ smIdType nb6 = NbPrisms(order);
save << clause << ".1) Number of " << orderStr << " hexahedrons: \t" << nb8 << endl;
save << clause << ".2) Number of " << orderStr << " tetrahedrons:\t" << nb4 << endl;
save << clause << ".3) Number of " << orderStr << " prisms: \t" << nb6 << endl;
save << clause << ".4) Number of " << orderStr << " pyramids: \t" << nb5 << endl;
if ( nb8 + nb4 + nb5 + nb6 != NbVolumes(order) ) {
std::map<int,int> myVolumesMap;
- SMDS_VolumeIteratorPtr itVolumes=_myMeshDS->volumesIterator();
+ SMDS_VolumeIteratorPtr itVolumes=_meshDS->volumesIterator();
while( itVolumes->more( ) ) {
int nbNodes = itVolumes->next()->NbNodes();
if ( myVolumesMap.find( nbNodes ) == myVolumesMap.end() )
//purpose : Returns type of mesh element with certain id
//=======================================================================
-SMDSAbs_ElementType SMESH_Mesh::GetElementType( const int id, const bool iselem )
+SMDSAbs_ElementType SMESH_Mesh::GetElementType( const smIdType id, const bool iselem )
{
- return _myMeshDS->GetElementType( id, iselem );
+ return _meshDS->GetElementType( id, iselem );
}
//=============================================================================
void SMESH_Mesh::ClearMeshOrder()
{
- _mySubMeshOrder.clear();
+ _subMeshOrder.clear();
}
//=============================================================================
void SMESH_Mesh::SetMeshOrder(const TListOfListOfInt& theOrder )
{
- _mySubMeshOrder = theOrder;
+ _subMeshOrder = theOrder;
}
//=============================================================================
const TListOfListOfInt& SMESH_Mesh::GetMeshOrder() const
{
- return _mySubMeshOrder;
+ return _subMeshOrder;
}
//=============================================================================
bool SMESH_Mesh::SortByMeshOrder(std::vector<SMESH_subMesh*>& theListToSort) const
{
- if ( !_mySubMeshOrder.size() || theListToSort.size() < 2)
+ if ( _subMeshOrder.empty() || theListToSort.size() < 2 )
return true;
-
- bool res = false;
- std::vector<SMESH_subMesh*> onlyOrderedList, smVec;
- // collect all ordered submeshes in one list as pointers
+
+ // collect all ordered sub-meshes in smVec as pointers
// and get their positions within theListToSort
+
+ std::vector<SMESH_subMesh*> smVec;
typedef std::vector<SMESH_subMesh*>::iterator TPosInList;
- std::map< int, TPosInList > sortedPos;
+ std::map< size_t, size_t > sortedPos; // index in theListToSort to order
TPosInList smBeg = theListToSort.begin(), smEnd = theListToSort.end();
- TListOfListOfInt::const_iterator listIdsIt = _mySubMeshOrder.begin();
- for( ; listIdsIt != _mySubMeshOrder.end(); listIdsIt++)
+ TListOfListOfInt::const_iterator listIdsIt = _subMeshOrder.begin();
+ bool needSort = false;
+ for( ; listIdsIt != _subMeshOrder.end(); listIdsIt++)
{
const TListOfInt& listOfId = *listIdsIt;
// convert sm ids to sm's
smVec.push_back( sm );
if ( sm->GetSubMeshDS() && sm->GetSubMeshDS()->IsComplexSubmesh() )
{
+ smVec.reserve( smVec.size() + sm->GetSubMeshDS()->NbSubMeshes() );
SMESHDS_SubMeshIteratorPtr smdsIt = sm->GetSubMeshDS()->GetSubMeshIterator();
while ( smdsIt->more() )
{
// find smVec items in theListToSort
for ( size_t i = 0; i < smVec.size(); ++i )
{
- TPosInList smPos = find( smBeg, smEnd, smVec[i] );
- if ( smPos != smEnd ) {
- sortedPos[ std::distance( smBeg, smPos )] = smPos;
- if ( sortedPos.size() > onlyOrderedList.size() )
- onlyOrderedList.push_back( smVec[i] );
+ TPosInList smPos = find( smBeg, smEnd, smVec[i] ); // position in theListToSort
+ if ( smPos != smEnd )
+ {
+ size_t posInList = std::distance( smBeg, smPos );
+ size_t order = sortedPos.size();
+ sortedPos.insert( std::make_pair( posInList, order ));
+ if ( posInList != order )
+ needSort = true;
}
}
}
- if (onlyOrderedList.size() < 2)
- return res;
- res = true;
+ if ( ! needSort )
+ return false;
- std::vector<SMESH_subMesh*>::iterator onlyBIt = onlyOrderedList.begin();
- std::vector<SMESH_subMesh*>::iterator onlyEIt = onlyOrderedList.end();
+ // set sm of sortedPos from theListToSort to front of orderedSM
+ // and the rest of theListToSort to orderedSM end
- // iterate on ordered sub-meshes and insert them in detected positions
- std::map< int, TPosInList >::iterator i_pos = sortedPos.begin();
- for ( ; onlyBIt != onlyEIt; ++onlyBIt, ++i_pos )
- *(i_pos->second) = *onlyBIt;
+ std::vector<SMESH_subMesh*> orderedSM;
+ orderedSM.reserve( theListToSort.size() );
+ orderedSM.resize( sortedPos.size() );
- return res;
+ size_t iPrev = 0;
+ sortedPos.insert( std::make_pair( theListToSort.size(), sortedPos.size() ));
+ for ( const auto & pos_order : sortedPos )
+ {
+ const size_t& posInList = pos_order.first;
+ const size_t& order = pos_order.second;
+ if ( order < sortedPos.size() - 1 )
+ orderedSM[ order ] = theListToSort[ posInList ];
+
+ if ( iPrev < posInList )
+ orderedSM.insert( orderedSM.end(),
+ theListToSort.begin() + iPrev,
+ theListToSort.begin() + posInList );
+ iPrev = posInList + 1;
+ }
+
+ theListToSort.swap( orderedSM );
+
+ return true;
}
//================================================================================
bool SMESH_Mesh::IsOrderOK( const SMESH_subMesh* smBefore,
const SMESH_subMesh* smAfter ) const
{
- TListOfListOfInt::const_iterator listIdsIt = _mySubMeshOrder.begin();
- for( ; listIdsIt != _mySubMeshOrder.end(); listIdsIt++)
+ TListOfListOfInt::const_iterator listIdsIt = _subMeshOrder.begin();
+ for( ; listIdsIt != _subMeshOrder.end(); listIdsIt++)
{
const TListOfInt& listOfId = *listIdsIt;
int iB = -1, iA = -1, i = 0;
}
}
return true; // no order imposed to given sub-meshes
-}
+}
//=============================================================================
/*!