-// Copyright (C) 2007-2008 CEA/DEN, EDF R&D, OPEN CASCADE
+// Copyright (C) 2007-2012 CEA/DEN, EDF R&D, OPEN CASCADE
//
-// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
+// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
//
-// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
+
// GEOM GEOMGUI : GUI for Geometry component
// File : RepairGUI_ShapeProcessDlg.cxx
// Author : Lucien PIGNOLONI, Open CASCADE S.A.S.
-//
+
#include "RepairGUI_ShapeProcessDlg.h"
#include <DlgRef.h>
#include <GeometryGUI.h>
#include <GEOMBase.h>
#include <GEOMImpl_Types.hxx>
-#include <QtxDoubleSpinBox.h>
#include <SalomeApp_Application.h>
#include <SalomeApp_DoubleSpinBox.h>
#include <SALOME_ListIteratorOfListIO.hxx>
#include <SALOME_ListIO.hxx>
+#include <Basics_Utils.hxx>
+
#include <TCollection_AsciiString.hxx>
#include <TColStd_MapOfInteger.hxx>
QGridLayout* aLay = new QGridLayout( w );
aLay->setMargin( 9 ); aLay->setSpacing( 6 );
- myFixShapeTol3D = new SalomeApp_DoubleSpinBox( 0., 100., 1e-7, 10, 10, w );
- myFixShapeMaxTol3D = new SalomeApp_DoubleSpinBox( 0., 100., 1e-7, 10, 10, w );
+ myFixShapeTol3D = new SalomeApp_DoubleSpinBox( w );
+ initSpinBox( myFixShapeTol3D, 0., 100., 1e-7, "len_tol_precision" );
+ myFixShapeMaxTol3D = new SalomeApp_DoubleSpinBox( w );
+ initSpinBox( myFixShapeMaxTol3D, 0., 100., 1e-7, "len_tol_precision" );
aLay->addWidget( new QLabel( tr( "GEOM_3D_TOLERANCE" ), w ), 0, 0 );
aLay->addWidget( myFixShapeTol3D, 0, 1 );
QGridLayout* aLay = new QGridLayout( w );
aLay->setMargin( 9 ); aLay->setSpacing( 6 );
- myFixFaceSizeTol = new SalomeApp_DoubleSpinBox( 0., 100., 1e-7, 10, 10, w );
+ myFixFaceSizeTol = new SalomeApp_DoubleSpinBox( w );
+ initSpinBox( myFixFaceSizeTol, 0., 100., 1e-7, "len_tol_precision" );
aLay->addWidget( new QLabel( tr( "GEOM_TOLERANCE" ), w ), 0, 0 );
aLay->addWidget( myFixFaceSizeTol, 0, 1 );
QGridLayout* aLay = new QGridLayout( w );
aLay->setMargin( 9 ); aLay->setSpacing( 6 );
- myDropSmallEdgesTol3D = new SalomeApp_DoubleSpinBox( 0., 100., 1e-7, 10, 10, w );
+ myDropSmallEdgesTol3D = new SalomeApp_DoubleSpinBox( w );
+ initSpinBox( myDropSmallEdgesTol3D, 0., 100., 1e-7, "len_tol_precision" );
aLay->addWidget( new QLabel( tr( "GEOM_3D_TOLERANCE" ), w ), 0, 0 );
aLay->addWidget( myDropSmallEdgesTol3D, 0, 1 );
QGridLayout* aLay = new QGridLayout( w );
aLay->setMargin( 9 ); aLay->setSpacing( 6 );
- mySplitAngleAngle = new SalomeApp_DoubleSpinBox( 0, 360, 1, 10, 10, w );
- mySplitAngleMaxTol = new SalomeApp_DoubleSpinBox( 0., 100., 1e-7, 10, 10, w );
+ mySplitAngleAngle = new SalomeApp_DoubleSpinBox( w );
+ initSpinBox( mySplitAngleAngle, 0, 360, 1, "angle_precision" );
+ mySplitAngleMaxTol = new SalomeApp_DoubleSpinBox( w );
+ initSpinBox( mySplitAngleMaxTol, 0., 100., 1e-7, "ang_tol_precision" );
aLay->addWidget( new QLabel( tr( "GEOM_ANGLE_1" ), w ), 0, 0 );
aLay->addWidget( mySplitAngleAngle, 0, 1 );
QGridLayout* aLay = new QGridLayout( w );
aLay->setMargin( 9 ); aLay->setSpacing( 6 );
- mySplitContTol3D = new SalomeApp_DoubleSpinBox( 0., 100., 1e-7, 10, 10, w );
+ mySplitContTol3D = new SalomeApp_DoubleSpinBox( w );
+ initSpinBox( mySplitContTol3D, 0., 100., 1e-7, "len_tol_precision" );
mySplitContSurfCont = new QComboBox( w );
mySplitContSurfCont->addItems( aContinueties );
mySplitContCurvCont = new QComboBox( w );
myBSpline3DCurveChk = new QCheckBox( tr("GEOM_3D_CURVE_MODE"), w );
myBSpline2DCurveChk = new QCheckBox( tr("GEOM_2D_CURVE_MODE"), w );
- myBSplineTol3D = new SalomeApp_DoubleSpinBox( 0., 100., 1e-7, 10, 10, w );
+ myBSplineTol3D = new SalomeApp_DoubleSpinBox( w );
+ initSpinBox( myBSplineTol3D, 0., 100., 1e-7, "len_tol_precision" );
- myBSplineTol2D = new SalomeApp_DoubleSpinBox( 0., 100., 1e-7, 10, 10, w );
+ myBSplineTol2D = new SalomeApp_DoubleSpinBox( w );
+ initSpinBox( myBSplineTol2D, 0., 100., 1e-7, "param_tol_precision" );
myBSplineDegree = new SalomeApp_IntSpinBox( w );
myBSplineSegments = new SalomeApp_IntSpinBox( w );
myToBezier3DCurveChk = new QCheckBox( tr("GEOM_3D_CURVE_MODE"), w );
myToBezier2DCurveChk = new QCheckBox( tr("GEOM_2D_CURVE_MODE"), w );
- myToBezierMaxTol = new SalomeApp_DoubleSpinBox( 0., 100., 1e-7, 10, 10, w );
+ myToBezierMaxTol = new SalomeApp_DoubleSpinBox( w );
+ initSpinBox( myToBezierMaxTol, 0., 100., 1e-7, "len_tol_precision" );
aLay->addWidget( myToBezierSurfModeChk, 0, 0 );
aLay->addWidget( myToBezier3DCurveChk, 1, 0 );
QGridLayout* aLay = new QGridLayout( w );
aLay->setMargin( 9 ); aLay->setSpacing( 6 );
- mySameParameterTol3D = new SalomeApp_DoubleSpinBox( 0., 100., 1e-7, 10, 10, w );
+ mySameParameterTol3D = new SalomeApp_DoubleSpinBox( w );
+ initSpinBox( mySameParameterTol3D, 0., 100., 1e-7, "len_tol_precision" );
aLay->addWidget( new QLabel( tr( "GEOM_3D_TOLERANCE" ), w ), 0, 0 );
aLay->addWidget( mySameParameterTol3D, 0, 1 );
reset();
initName( tr( "PROCESS_SHAPE_NEW_OBJ_NAME" ) );
+ selectionChanged();
}
//=================================================================================
//=================================================================================
void RepairGUI_ShapeProcessDlg::onOk()
{
+ setIsApplyAndClose( true );
if ( onApply() )
ClickOnCancel();
}
SALOME_ListIO aSelList;
aSelMgr->selectedObjects(aSelList);
- Standard_Boolean aRes = Standard_False;
int i = 0;
myObjects->length(aSelList.Extent());
for (SALOME_ListIteratorOfListIO anIt (aSelList); anIt.More(); anIt.Next()) {
- GEOM::GEOM_Object_var aSelectedObject = GEOMBase::ConvertIOinGEOMObject( anIt.Value(), aRes );
- if ( !CORBA::is_nil( aSelectedObject ) && aRes )
- myObjects[i++] = aSelectedObject;
+ GEOM::GEOM_Object_var aSelectedObject = GEOMBase::ConvertIOinGEOMObject( anIt.Value() );
+ if ( !CORBA::is_nil( aSelectedObject ) )
+ myObjects[i++] = aSelectedObject;
}
myObjects->length( i );
if ( i == 1 )
const char* get_convert( const char* theParam, const QString& theValue )
{
if ( !strcmp( theParam, "SplitAngle.Angle" ) ) {
- double doubleValue = theValue.toDouble() * PI / 180;
+ double doubleValue = theValue.toDouble() * M_PI / 180.;
return CORBA::string_dup( QString::number( doubleValue ).toLatin1().constData() );
}
return CORBA::string_dup( theValue.toLatin1().constData() );
// function : set_convert
// purpose : conversion of angle values to degrees (non-angle values are not converted)
//=================================================================================
-const char* set_convert( const char* theParam, const char* theValue )
+QString set_convert( const char* theParam, const char* theValue )
{
if ( !strcmp( theParam, "SplitAngle.Angle" ) ) {
- double doubleValue = atof( theValue ) * 180 / PI;
- TCollection_AsciiString str( doubleValue );
- return CORBA::string_dup( str.ToCString() );
+ Kernel_Utils::Localizer loc;
+ double doubleValue = atof( theValue ) * 180. / M_PI;
+ return QString::number( doubleValue );
}
- return CORBA::string_dup( theValue );
+ return QString( theValue );
}
//=================================================================================
for ( int j = 0; j < aParams->length(); j++ ) {
QWidget* aCtrl = getControl( (const char*)aParams[j] );
- const char* aValue = set_convert( (const char*)aParams[j], aValues[j] );
- setValue( aCtrl, aValue );
+ setValue( aCtrl, set_convert( (const char*)aParams[j], aValues[j] ) );
}
}
}
