-// GEOM GEOMGUI : GUI for Geometry component
+// Copyright (C) 2007-2012 CEA/DEN, EDF R&D, OPEN CASCADE
//
-// Copyright (C) 2003 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
-// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
-//
-// This library is free software; you can redistribute it and/or
-// modify it under the terms of the GNU Lesser General Public
-// License as published by the Free Software Foundation; either
-// version 2.1 of the License.
-//
-// This library is distributed in the hope that it will be useful,
-// but WITHOUT ANY WARRANTY; without even the implied warranty of
-// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-// Lesser General Public License for more details.
-//
-// You should have received a copy of the GNU Lesser General Public
-// License along with this library; if not, write to the Free Software
-// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-//
-// See http://www.opencascade.org/SALOME/ or email : webmaster.salome@opencascade.org
+// Copyright (C) 2003-2007 OPEN CASCADE, EADS/CCR, LIP6, CEA/DEN,
+// CEDRAT, EDF R&D, LEG, PRINCIPIA R&D, BUREAU VERITAS
//
+// This library is free software; you can redistribute it and/or
+// modify it under the terms of the GNU Lesser General Public
+// License as published by the Free Software Foundation; either
+// version 2.1 of the License.
//
+// This library is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+// Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public
+// License along with this library; if not, write to the Free Software
+// Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+//
+// See http://www.salome-platform.org/ or email : webmaster.salome@opencascade.com
//
-// File : RepairGUI_ShapeProcessDlg.cxx
-// Author : Lucien PIGNOLONI
-// Module : GEOM
-// $Header$
+
+// GEOM GEOMGUI : GUI for Geometry component
+// File : RepairGUI_ShapeProcessDlg.cxx
+// Author : Lucien PIGNOLONI, Open CASCADE S.A.S.
#include "RepairGUI_ShapeProcessDlg.h"
-#include "GEOMImpl_Types.hxx"
+#include <DlgRef.h>
+#include <GeometryGUI.h>
+#include <GEOMBase.h>
+#include <GEOMImpl_Types.hxx>
+
+#include <SalomeApp_Application.h>
+#include <SalomeApp_DoubleSpinBox.h>
+#include <SalomeApp_IntSpinBox.h>
+#include <LightApp_SelectionMgr.h>
+#include <SUIT_Session.h>
+#include <SUIT_ResourceMgr.h>
+#include <SUIT_MessageBox.h>
+#include <SALOME_ListIteratorOfListIO.hxx>
+#include <SALOME_ListIO.hxx>
-#include "SalomeApp_Application.h"
-#include "SalomeApp_SelectionMgr.h"
-#include "SUIT_Session.h"
-#include "SALOME_ListIteratorOfListIO.hxx"
-#include "SALOME_ListIO.hxx"
+#include <Basics_Utils.hxx>
#include <TCollection_AsciiString.hxx>
#include <TColStd_MapOfInteger.hxx>
-#include <qheader.h>
-#include <qlabel.h>
-#include <qmessagebox.h>
-
-using namespace std;
+#include <QListWidget>
+#include <QStackedLayout>
//=================================================================================
// class : RepairGUI_ShapeProcessDlg()
// The dialog will by default be modeless, unless you set 'modal' to
// TRUE to construct a modal dialog.
//=================================================================================
-RepairGUI_ShapeProcessDlg::RepairGUI_ShapeProcessDlg(QWidget* parent, const char* name, bool modal, WFlags fl)
- :GEOMBase_Skeleton(parent, name, modal, WStyle_Customize | WStyle_NormalBorder | WStyle_Title | WStyle_SysMenu)
+RepairGUI_ShapeProcessDlg::RepairGUI_ShapeProcessDlg( GeometryGUI* theGeometryGUI, QWidget* parent,
+ bool modal )
+ : GEOMBase_Skeleton( theGeometryGUI, parent, modal )
{
+ setHelpFileName( "shape_processing_operation_page.html" );
init();
}
-
//=================================================================================
// function : ~RepairGUI_ShapeProcessDlg()
// purpose : Destroys the object and frees any allocated resources
{
}
-
//=================================================================================
// function : Init()
// purpose :
initParamsValues();
initSelection();
-
- setCaption(tr("GEOM_SHAPEPROCESS_TITLE"));
+
+ setWindowTitle( tr( "GEOM_SHAPEPROCESS_TITLE" ) );
- GroupConstructors->hide();
+ mainFrame()->GroupConstructors->hide();
// select widget on the top
- mySelectWdgt = new DlgRef_1Sel_QTD( this, "SelectedObjects" );
- mySelectWdgt->GroupBox1->setTitle( tr("GEOM_SHAPE") );
- mySelectWdgt->TextLabel1->setText( tr("GEOM_SELECTED_OBJECTS") );
- mySelectWdgt->PushButton1->setPixmap( SUIT_Session::session()->resourceMgr()->loadPixmap("GEOM",tr("ICON_SELECT")) );
+ mySelectWdgt = new DlgRef_1Sel( centralWidget() );
+ mySelectWdgt->GroupBox1->setTitle( tr( "GEOM_SHAPE" ) );
+ mySelectWdgt->TextLabel1->setText( tr( "GEOM_SELECTED_OBJECTS" ) );
+ mySelectWdgt->PushButton1->setIcon( SUIT_Session::session()->resourceMgr()->loadPixmap( "GEOM", tr( "ICON_SELECT" ) ) );
mySelectWdgt->LineEdit1->setReadOnly( true );
- Layout1->addWidget( mySelectWdgt, 0, 0 );
-
// layout the two group boxes in the middle, add a list of operations
- QFrame* aMidFrame = new QFrame( this );
- QGridLayout* aMidLay = new QGridLayout( aMidFrame, 1, 3, 0, 5 );
- QGroupBox* anOperGr = new QGroupBox( tr("GEOM_OPERATIONS"), aMidFrame );
- QVBoxLayout* aOperLay = new QVBoxLayout( anOperGr, 0, 0 );
-
- myOpList = new QListView( anOperGr );
- myOpList->setSorting( -1 );
- myOpList->addColumn( "Operations" );
- myOpList->header()->hide();
- aOperLay->addWidget( myOpList );
- QStringList::ConstIterator it = myOpLst.end();
- do // iterating from end to begin so to keep the order of items in the listview.
- new QCheckListItem ( myOpList, *(--it), QCheckListItem::CheckBox );
- while ( it != myOpLst.begin() );
+ QGroupBox* anOperGr = new QGroupBox( tr( "GEOM_OPERATIONS" ), centralWidget() );
+
+ // operations list widget
+ myOpList = new QListWidget( anOperGr );
+ myOpList->setSortingEnabled( false );
+ myOpList->setSizePolicy( QSizePolicy( QSizePolicy::Minimum, QSizePolicy::Expanding ) );
- QGroupBox* aParamsGr = new QGroupBox( tr("GEOM_PARAMETERS"), aMidFrame );
- aMidLay->addWidget( anOperGr, 0, 0 );
- aMidLay->addMultiCellWidget( aParamsGr, 0, 0, 1, 3 );
- aMidLay->setColStretch( 0, 1 );
- aMidLay->setColStretch( 1, 2 );
+ QVBoxLayout* aOperLay = new QVBoxLayout( anOperGr );
+ aOperLay->setMargin( 9 );
+ aOperLay->addWidget( myOpList );
- Layout1->addWidget( aMidFrame, 2, 0 );
- Layout1->setRowStretch( 0, 0 );
- Layout1->setRowStretch( 1, 1 );
+ QGroupBox* aParamsGr = new QGroupBox( tr( "GEOM_PARAMETERS" ), centralWidget() );
// add a widget stack to the parameters group box
- myStack = new QWidgetStack( aParamsGr );
- QVBoxLayout* aVParamsLay = new QVBoxLayout( aParamsGr );
- aVParamsLay->addWidget( myStack );
+ QStackedLayout* aStack = new QStackedLayout( aParamsGr );
// continueties values..
- QStringList aContinueties = QStringList::split( ",", "C0,G1,C1,G2,C2,C3,CN" );
-
- // FixShape
- QFrame* aFrame = new QFrame( myStack );
- QGridLayout* aLay = new QGridLayout( aFrame, 10, 2, 0, 5 );
-
- myFixShapeTol3D = new QtxDblSpinBox( 0, 100, 1e-7, aFrame );//QAD_SpinBoxDbl( aFrame, 0, 100, 1e-7, 10, 1e-10 );
- myFixShapeTol3D->setPrecision( 10 );
- myFixShapeMaxTol3D = new QtxDblSpinBox( 0, 100, 1e-7, aFrame );//QAD_SpinBoxDbl( aFrame, 0, 100, 1e-7, 10, 1e-10 );
- myFixShapeMaxTol3D->setPrecision( 10 );
-
- aLay->addWidget( new QLabel( tr("GEOM_3D_TOLERANCE"), aFrame ), 0, 0 );
- aLay->addWidget( myFixShapeTol3D, 0, 1 );
- aLay->addWidget( new QLabel( tr("GEOM_MAX_3D_TOLERANCE"), aFrame ), 1, 0 );
- aLay->addWidget( myFixShapeMaxTol3D, 1, 1 );
- aLay->setRowStretch( 9, 2 );
-
- myStack->addWidget( aFrame, myOpLst.findIndex( "FixShape" ) );
-
- // FixFaceSize
- aFrame = new QFrame( myStack );
- aLay = new QGridLayout( aFrame, 10, 2, 0, 5 );
-
- myFixFaceSizeTol = new QtxDblSpinBox( 0, 100, 1e-7, aFrame );//QAD_SpinBoxDbl( aFrame, 0, 100, 1e-7, 10, 1e-10 );
- myFixFaceSizeTol->setPrecision( 10 );
-
- aLay->addWidget( new QLabel( tr("GEOM_TOLERANCE"), aFrame ), 0, 0 );
- aLay->addWidget( myFixFaceSizeTol, 0, 1 );
- aLay->setRowStretch( 9, 2 );
-
- myStack->addWidget( aFrame, myOpLst.findIndex( "FixFaceSize" ) );
-
- // DropSmallEdges
- aFrame = new QFrame( myStack );
- aLay = new QGridLayout( aFrame, 10, 2, 0, 5 );
-
- myDropSmallEdgesTol3D = new QtxDblSpinBox( 0, 100, 1e-7, aFrame );//QAD_SpinBoxDbl( aFrame, 0, 100, 1e-7, 10, 1e-10 );
- myDropSmallEdgesTol3D->setPrecision( 10 );
-
- aLay->addWidget( new QLabel( tr("GEOM_3D_TOLERANCE"), aFrame ), 0, 0 );
- aLay->addWidget( myDropSmallEdgesTol3D, 0, 1 );
- aLay->setRowStretch( 9, 2 );
-
- myStack->addWidget( aFrame, myOpLst.findIndex( "DropSmallEdges" ) );
-
- // SplitAngle
- aFrame = new QFrame( myStack );
- aLay = new QGridLayout( aFrame, 10, 2, 0, 5 );
-
- mySplitAngleAngle = new QtxDblSpinBox( 0, 360, 1, aFrame );//QAD_SpinBoxDbl( aFrame, 0, 360, 1 );
- mySplitAngleMaxTol = new QtxDblSpinBox( 0, 100, 1e-7, aFrame );//QAD_SpinBoxDbl( aFrame, 0, 100, 1e-7, 10, 1e-10 );
- mySplitAngleMaxTol->setPrecision( 10 );
-
- aLay->addWidget( new QLabel( tr("GEOM_ANGLE_1"), aFrame ), 0, 0 );
- aLay->addWidget( mySplitAngleAngle, 0, 1 );
- aLay->addWidget( new QLabel( tr("GEOM_MAX_TOLERANCE"), aFrame ), 1, 0 );
- aLay->addWidget( mySplitAngleMaxTol, 1, 1 );
- aLay->setRowStretch( 9, 2 );
-
- myStack->addWidget( aFrame, myOpLst.findIndex( "SplitAngle" ) );
-
- // SplitClosedFaces
- aFrame = new QFrame( myStack );
- aLay = new QGridLayout( aFrame, 10, 2, 0, 5 );
-
- mySplitClosedFacesNum = new QSpinBox( aFrame );
-
- aLay->addWidget( new QLabel( tr("GEOM_NUM_SPLIT_POINTS"), aFrame ), 0, 0 );
- aLay->addWidget( mySplitClosedFacesNum, 0, 1 );
- aLay->setRowStretch( 9, 2 );
-
- myStack->addWidget( aFrame, myOpLst.findIndex( "SplitClosedFaces" ) );
-
- // SplitContinuity
- aFrame = new QFrame( myStack );
- aLay = new QGridLayout( aFrame, 10, 2, 0, 5 );
-
- mySplitContTol3D = new QtxDblSpinBox( 0, 100, 1e-7, aFrame );//QAD_SpinBoxDbl( aFrame, 0, 100, 1e-7, 10, 1e-10 );
- mySplitContTol3D->setPrecision( 10 );
- mySplitContSurfCont = new QComboBox( aFrame );
- mySplitContSurfCont->insertStringList( aContinueties );
- mySplitContCurvCont = new QComboBox( aFrame );
- mySplitContCurvCont->insertStringList( aContinueties );
-
- aLay->addWidget( new QLabel( tr("GEOM_3D_TOLERANCE"), aFrame ), 0, 0 );
- aLay->addWidget( mySplitContTol3D, 0, 1 );
- aLay->addWidget( new QLabel( tr("GEOM_SURFACE_CONTINUTY"), aFrame ), 1, 0 );
- aLay->addWidget( mySplitContSurfCont, 1, 1 );
- aLay->addWidget( new QLabel( tr("GEOM_CURVE_CONTINUTY"), aFrame ), 2, 0 );
- aLay->addWidget( mySplitContCurvCont, 2, 1 );
- aLay->setRowStretch( 9, 2 );
-
- myStack->addWidget( aFrame, myOpLst.findIndex( "SplitContinuity" ) );
-
- // BSplineRestriction
- aFrame = new QFrame( myStack );
- aLay = new QGridLayout( aFrame, 10, 2, 0, 5 );
-
- myBSplineSurfModeChk = new QCheckBox( tr("GEOM_SURFACE_MODE"), aFrame );
- myBSpline3DCurveChk = new QCheckBox( tr("GEOM_3D_CURVE_MODE"), aFrame );
- myBSpline2DCurveChk = new QCheckBox( tr("GEOM_2D_CURVE_MODE"), aFrame );
-
- myBSplineTol3D = new QtxDblSpinBox( 0, 100, 1e-7, aFrame );//QAD_SpinBoxDbl( aFrame, 0, 100, 1e-7, 10, 1e-10 );
- myBSplineTol3D->setPrecision( 10 );
-
- myBSplineTol2D = new QtxDblSpinBox( 0, 100, 1e-7, aFrame );//QAD_SpinBoxDbl( aFrame, 0, 100, 1e-7, 10, 1e-10 );
- myBSplineTol2D->setPrecision( 10 );
-
- myBSplineDegree = new QSpinBox( aFrame );
- myBSplineSegments = new QSpinBox( aFrame );
- myBSpline2DCont = new QComboBox( aFrame );
- myBSpline2DCont->insertStringList( aContinueties );
- myBSpline3DCont = new QComboBox( aFrame );
- myBSpline3DCont->insertStringList( aContinueties );
-
- myBSplineSurfModeChk->setChecked( true );
- myBSpline3DCurveChk->setChecked( true );
- myBSpline2DCurveChk->setChecked( true );
-
- aLay->addWidget( myBSplineSurfModeChk, 0, 0 );
- aLay->addWidget( myBSpline3DCurveChk, 1, 0 );
- aLay->addWidget( myBSpline2DCurveChk, 2, 0 );
- aLay->addWidget( new QLabel( tr("GEOM_3D_TOLERANCE"), aFrame), 3, 0 );
- aLay->addWidget( myBSplineTol3D, 3, 1 );
- aLay->addWidget( new QLabel( tr("GEOM_2D_TOLERANCE"), aFrame), 4, 0 );
- aLay->addWidget( myBSplineTol2D, 4, 1 );
- aLay->addWidget( new QLabel( tr("GEOM_REQUIRED_DEGREE"), aFrame), 5, 0 );
- aLay->addWidget( myBSplineDegree, 5, 1 );
- aLay->addWidget( new QLabel( tr("GEOM_REQUIRED_NUM_SEGMENTS"), aFrame), 6, 0 );
- aLay->addWidget( myBSplineSegments, 6, 1 );
- aLay->addWidget( new QLabel( tr("GEOM_3D_CONTINUTY"), aFrame), 7, 0 );
- aLay->addWidget( myBSpline3DCont, 7, 1 );
- aLay->addWidget( new QLabel( tr("GEOM_2D_CONTINUTY"), aFrame), 8, 0 );
- aLay->addWidget( myBSpline2DCont, 8, 1 );
- aLay->setRowStretch( 9, 2 );
+ QStringList aContinueties = QString( "C0,G1,C1,G2,C2,C3,CN" ).split( "," );
+
+ // fill in the widgets
+ for ( int i = 0; i < myOpLst.count(); i++ ) {
+ QListWidgetItem* item = new QListWidgetItem( myOpLst[i] );
+ item->setFlags( Qt::ItemIsSelectable | Qt::ItemIsEnabled | Qt::ItemIsUserCheckable );
+ item->setCheckState( Qt::Unchecked );
+ myOpList->addItem( item );
+
+ QWidget* w;
+ if ( myOpLst[i] == "FixShape" ) {
+ // FixShape
+ w = new QWidget( aParamsGr );
+ QGridLayout* aLay = new QGridLayout( w );
+ aLay->setMargin( 9 ); aLay->setSpacing( 6 );
+
+ myFixShapeTol3D = new SalomeApp_DoubleSpinBox( w );
+ initSpinBox( myFixShapeTol3D, 0., 100., 1e-7, "len_tol_precision" );
+ myFixShapeMaxTol3D = new SalomeApp_DoubleSpinBox( w );
+ initSpinBox( myFixShapeMaxTol3D, 0., 100., 1e-7, "len_tol_precision" );
+
+ aLay->addWidget( new QLabel( tr( "GEOM_3D_TOLERANCE" ), w ), 0, 0 );
+ aLay->addWidget( myFixShapeTol3D, 0, 1 );
+ aLay->addWidget( new QLabel( tr( "GEOM_MAX_3D_TOLERANCE" ), w ), 1, 0 );
+ aLay->addWidget( myFixShapeMaxTol3D, 1, 1 );
+ aLay->setRowStretch( aLay->rowCount(), 5 );
+ }
+ else if ( myOpLst[i] == "FixFaceSize" ) {
+ // FixFaceSize
+ w = new QWidget( aParamsGr );
+ QGridLayout* aLay = new QGridLayout( w );
+ aLay->setMargin( 9 ); aLay->setSpacing( 6 );
+
+ myFixFaceSizeTol = new SalomeApp_DoubleSpinBox( w );
+ initSpinBox( myFixFaceSizeTol, 0., 100., 1e-7, "len_tol_precision" );
+
+ aLay->addWidget( new QLabel( tr( "GEOM_TOLERANCE" ), w ), 0, 0 );
+ aLay->addWidget( myFixFaceSizeTol, 0, 1 );
+ aLay->setRowStretch( aLay->rowCount(), 5 );
+ }
+ else if ( myOpLst[i] == "DropSmallEdges" ) {
+ // DropSmallEdges
+ w = new QWidget( aParamsGr );
+ QGridLayout* aLay = new QGridLayout( w );
+ aLay->setMargin( 9 ); aLay->setSpacing( 6 );
+
+ myDropSmallEdgesTol3D = new SalomeApp_DoubleSpinBox( w );
+ initSpinBox( myDropSmallEdgesTol3D, 0., 100., 1e-7, "len_tol_precision" );
- myStack->addWidget( aFrame, myOpLst.findIndex( "BSplineRestriction" ) );
-
- // ToBezier
- aFrame = new QFrame( myStack );
- aLay = new QGridLayout( aFrame, 10, 2, 0, 5 );
-
- myToBezierSurfModeChk = new QCheckBox( tr("GEOM_SURFACE_MODE"), aFrame );
- myToBezier3DCurveChk = new QCheckBox( tr("GEOM_3D_CURVE_MODE"), aFrame );
- myToBezier2DCurveChk = new QCheckBox( tr("GEOM_2D_CURVE_MODE"), aFrame );
+ aLay->addWidget( new QLabel( tr( "GEOM_3D_TOLERANCE" ), w ), 0, 0 );
+ aLay->addWidget( myDropSmallEdgesTol3D, 0, 1 );
+ aLay->setRowStretch( aLay->rowCount(), 5 );
+ }
+ else if ( myOpLst[i] == "SplitAngle" ) {
+ // SplitAngle
+ w = new QWidget( aParamsGr );
+ QGridLayout* aLay = new QGridLayout( w );
+ aLay->setMargin( 9 ); aLay->setSpacing( 6 );
+
+ mySplitAngleAngle = new SalomeApp_DoubleSpinBox( w );
+ initSpinBox( mySplitAngleAngle, 0, 360, 1, "angle_precision" );
+ mySplitAngleMaxTol = new SalomeApp_DoubleSpinBox( w );
+ initSpinBox( mySplitAngleMaxTol, 0., 100., 1e-7, "ang_tol_precision" );
+
+ aLay->addWidget( new QLabel( tr( "GEOM_ANGLE_1" ), w ), 0, 0 );
+ aLay->addWidget( mySplitAngleAngle, 0, 1 );
+ aLay->addWidget( new QLabel( tr( "GEOM_MAX_TOLERANCE" ), w ), 1, 0 );
+ aLay->addWidget( mySplitAngleMaxTol, 1, 1 );
+ aLay->setRowStretch( aLay->rowCount(), 5 );
+ }
+ else if ( myOpLst[i] == "SplitClosedFaces" ) {
+ // SplitClosedFaces
+ w = new QWidget( aParamsGr );
+ QGridLayout* aLay = new QGridLayout( w );
+ aLay->setMargin( 9 ); aLay->setSpacing( 6 );
+
+ mySplitClosedFacesNum = new SalomeApp_IntSpinBox( w );
- myToBezierMaxTol = new QtxDblSpinBox( 0, 100, 1e-7, aFrame );//QAD_SpinBoxDbl( aFrame, 0, 100, 1e-7, 10, 1e-10 );
- myToBezierMaxTol->setPrecision( 10 );
-
- aLay->addWidget( myToBezierSurfModeChk, 0, 0 );
- aLay->addWidget( myToBezier3DCurveChk, 1, 0 );
- aLay->addWidget( myToBezier2DCurveChk, 2, 0 );
- aLay->addWidget( new QLabel( tr("GEOM_MAX_TOLERANCE"), aFrame), 3, 0 );
- aLay->addWidget( myToBezierMaxTol, 3, 1 );
- aLay->setRowStretch( 9, 2 );
+ aLay->addWidget( new QLabel( tr( "GEOM_NUM_SPLIT_POINTS" ), w ), 0, 0 );
+ aLay->addWidget( mySplitClosedFacesNum, 0, 1 );
+ aLay->setRowStretch( aLay->rowCount(), 5 );
+ }
+ else if ( myOpLst[i] == "SplitContinuity" ) {
+ // SplitContinuity
+ w = new QWidget( aParamsGr );
+ QGridLayout* aLay = new QGridLayout( w );
+ aLay->setMargin( 9 ); aLay->setSpacing( 6 );
+
+ mySplitContTol3D = new SalomeApp_DoubleSpinBox( w );
+ initSpinBox( mySplitContTol3D, 0., 100., 1e-7, "len_tol_precision" );
+ mySplitContSurfCont = new QComboBox( w );
+ mySplitContSurfCont->addItems( aContinueties );
+ mySplitContCurvCont = new QComboBox( w );
+ mySplitContCurvCont->addItems( aContinueties );
+
+ aLay->addWidget( new QLabel( tr( "GEOM_3D_TOLERANCE" ), w ), 0, 0 );
+ aLay->addWidget( mySplitContTol3D, 0, 1 );
+ aLay->addWidget( new QLabel( tr( "GEOM_SURFACE_CONTINUTY" ), w ), 1, 0 );
+ aLay->addWidget( mySplitContSurfCont, 1, 1 );
+ aLay->addWidget( new QLabel( tr( "GEOM_CURVE_CONTINUTY" ), w ), 2, 0 );
+ aLay->addWidget( mySplitContCurvCont, 2, 1 );
+ aLay->setRowStretch( aLay->rowCount(), 5 );
+ }
+ else if ( myOpLst[i] == "BSplineRestriction" ) {
+ // BSplineRestriction
+ w = new QWidget( aParamsGr );
+ QGridLayout* aLay = new QGridLayout( w );
+ aLay->setMargin( 9 ); aLay->setSpacing( 6 );
+
+ myBSplineSurfModeChk = new QCheckBox( tr("GEOM_SURFACE_MODE"), w );
+ myBSpline3DCurveChk = new QCheckBox( tr("GEOM_3D_CURVE_MODE"), w );
+ myBSpline2DCurveChk = new QCheckBox( tr("GEOM_2D_CURVE_MODE"), w );
+
+ myBSplineTol3D = new SalomeApp_DoubleSpinBox( w );
+ initSpinBox( myBSplineTol3D, 0., 100., 1e-7, "len_tol_precision" );
+
+ myBSplineTol2D = new SalomeApp_DoubleSpinBox( w );
+ initSpinBox( myBSplineTol2D, 0., 100., 1e-7, "param_tol_precision" );
+
+ myBSplineDegree = new SalomeApp_IntSpinBox( w );
+ myBSplineSegments = new SalomeApp_IntSpinBox( w );
+ myBSpline2DCont = new QComboBox( w );
+ myBSpline2DCont->addItems( aContinueties );
+ myBSpline3DCont = new QComboBox( w );
+ myBSpline3DCont->addItems( aContinueties );
+
+ myBSplineSurfModeChk->setChecked( true );
+ myBSpline3DCurveChk->setChecked( true );
+ myBSpline2DCurveChk->setChecked( true );
+
+ aLay->addWidget( myBSplineSurfModeChk, 0, 0 );
+ aLay->addWidget( myBSpline3DCurveChk, 1, 0 );
+ aLay->addWidget( myBSpline2DCurveChk, 2, 0 );
+ aLay->addWidget( new QLabel( tr( "GEOM_3D_TOLERANCE" ), w ), 3, 0 );
+ aLay->addWidget( myBSplineTol3D, 3, 1 );
+ aLay->addWidget( new QLabel( tr( "GEOM_2D_TOLERANCE" ), w ), 4, 0 );
+ aLay->addWidget( myBSplineTol2D, 4, 1 );
+ aLay->addWidget( new QLabel( tr( "GEOM_REQUIRED_DEGREE" ), w ), 5, 0 );
+ aLay->addWidget( myBSplineDegree, 5, 1 );
+ aLay->addWidget( new QLabel( tr( "GEOM_REQUIRED_NUM_SEGMENTS" ), w ), 6, 0 );
+ aLay->addWidget( myBSplineSegments, 6, 1 );
+ aLay->addWidget( new QLabel( tr( "GEOM_3D_CONTINUTY" ), w ), 7, 0 );
+ aLay->addWidget( myBSpline3DCont, 7, 1 );
+ aLay->addWidget( new QLabel( tr( "GEOM_2D_CONTINUTY" ), w ), 8, 0 );
+ aLay->addWidget( myBSpline2DCont, 8, 1 );
+ aLay->setRowStretch( aLay->rowCount(), 5 );
+ }
+ else if ( myOpLst[i] == "ToBezier" ) {
+ // ToBezier
+ w = new QWidget( aParamsGr );
+ QGridLayout* aLay = new QGridLayout( w );
+ aLay->setMargin( 9 ); aLay->setSpacing( 6 );
+
+ myToBezierSurfModeChk = new QCheckBox( tr("GEOM_SURFACE_MODE"), w );
+ myToBezier3DCurveChk = new QCheckBox( tr("GEOM_3D_CURVE_MODE"), w );
+ myToBezier2DCurveChk = new QCheckBox( tr("GEOM_2D_CURVE_MODE"), w );
- myStack->addWidget( aFrame, myOpLst.findIndex( "ToBezier" ) );
-
- // SameParameter
- aFrame = new QFrame( myStack );
- aLay = new QGridLayout( aFrame, 10, 2, 0, 5 );
-
- mySameParameterTol3D = new QtxDblSpinBox( 0, 100, 1e-7, aFrame );//QAD_SpinBoxDbl( aFrame, 0, 100, 1e-7, 10, 1e-10 );
- mySameParameterTol3D->setPrecision( 10 );
+ myToBezierMaxTol = new SalomeApp_DoubleSpinBox( w );
+ initSpinBox( myToBezierMaxTol, 0., 100., 1e-7, "len_tol_precision" );
+
+ aLay->addWidget( myToBezierSurfModeChk, 0, 0 );
+ aLay->addWidget( myToBezier3DCurveChk, 1, 0 );
+ aLay->addWidget( myToBezier2DCurveChk, 2, 0 );
+ aLay->addWidget( new QLabel( tr( "GEOM_MAX_TOLERANCE" ), w ), 3, 0 );
+ aLay->addWidget( myToBezierMaxTol, 3, 1 );
+ aLay->setRowStretch( aLay->rowCount(), 5 );
+ }
+ else if ( myOpLst[i] == "SameParameter" ) {
+ // SameParameter
+ w = new QWidget( aParamsGr );
+ QGridLayout* aLay = new QGridLayout( w );
+ aLay->setMargin( 9 ); aLay->setSpacing( 6 );
+
+ mySameParameterTol3D = new SalomeApp_DoubleSpinBox( w );
+ initSpinBox( mySameParameterTol3D, 0., 100., 1e-7, "len_tol_precision" );
+
+ aLay->addWidget( new QLabel( tr( "GEOM_3D_TOLERANCE" ), w ), 0, 0 );
+ aLay->addWidget( mySameParameterTol3D, 0, 1 );
+ aLay->setRowStretch( aLay->rowCount(), 5 );
+ }
+ else {
+ w = new QWidget( aParamsGr ); // dumb widget
+ }
+ aStack->insertWidget( i, w );
+ }
- aLay->addWidget( new QLabel( tr("GEOM_3D_TOLERANCE"), aFrame ), 0, 0 );
- aLay->addWidget( mySameParameterTol3D, 0, 1 );
- aLay->setRowStretch( 9, 2 );
-
- myStack->addWidget( aFrame, myOpLst.findIndex( "SameParameter" ) );
+ QGridLayout* layout = new QGridLayout( centralWidget() );
+ layout->setMargin( 0 ); layout->setSpacing( 6 );
+ layout->addWidget( mySelectWdgt, 0, 0, 1, 2 );
+ layout->addWidget( anOperGr, 1, 0 );
+ layout->addWidget( aParamsGr, 1, 1 );
// signals and slots connections
- connect( myGeomGUI, SIGNAL(SignalDeactivateActiveDialog()), this, SLOT(deactivate()) );
- connect( myGeomGUI, SIGNAL(SignalCloseAllDialogs()), this, SLOT(onCancel()) );
+ connect( buttonOk(), SIGNAL( clicked() ), this, SLOT( onOk() ) );
+ connect( buttonApply(), SIGNAL( clicked() ), this, SLOT( onApply() ) );
- connect( buttonCancel, SIGNAL(clicked()), this, SLOT(onCancel()) );
- connect( buttonOk, SIGNAL(clicked()), this, SLOT(onOk()) );
- connect( buttonApply, SIGNAL(clicked()), this, SLOT(onApply()) );
+ connect( ( (SalomeApp_Application*)( SUIT_Session::session()->activeApplication() ) )->selectionMgr(),
+ SIGNAL( currentSelectionChanged() ), this, SLOT( selectionChanged() ) );
- connect( ((SalomeApp_Application*)(SUIT_Session::session()->activeApplication()))->selectionMgr(),
- SIGNAL(currentSelectionChanged()), this, SLOT(selectionChanged()) );
- connect( myOpList, SIGNAL(selectionChanged()), this, SLOT(operationChanged()) );
+ connect( mySelectWdgt->PushButton1, SIGNAL( clicked() ), this, SLOT( selectClicked() ) );
+ connect( mySelectWdgt->LineEdit1, SIGNAL( returnPressed() ), this, SLOT( lineEditReturnPressed() ) );
- connect( mySelectWdgt->PushButton1, SIGNAL(clicked()), this, SLOT(selectClicked()) );
- connect( mySelectWdgt->LineEdit1, SIGNAL(returnPressed()), this, SLOT(lineEditReturnPressed()) );
+ connect( myToBezierSurfModeChk, SIGNAL( toggled( bool ) ), this, SLOT( advOptionToggled( bool ) ) );
- connect( myToBezierSurfModeChk, SIGNAL(toggled(bool)), SLOT(advOptionToggled(bool)) );
+ connect( myOpList, SIGNAL( currentRowChanged( int ) ), aStack, SLOT( setCurrentIndex( int ) ) );
adjustSize();
loadDefaults(); // init dialog fields with values from resource file
- myOpList->setSelected( myOpList->findItem( "FixShape", 0 ), true );
+ //myOpList->setCurrentRow( myOpList->findItem( 0 );
reset();
initName( tr( "PROCESS_SHAPE_NEW_OBJ_NAME" ) );
-}
-
-//=================================================================================
-// function : operationChanged()
-// purpose :
-//=================================================================================
-void RepairGUI_ShapeProcessDlg::operationChanged()
-{
- QListViewItem* anItem = myOpList->selectedItem();
- if ( anItem )
- {
- int id = myOpLst.findIndex( anItem->text(0) );
- if ( id > -1 )
- myStack->raiseWidget( id );
- }
+ selectionChanged();
}
//=================================================================================
//=================================================================================
void RepairGUI_ShapeProcessDlg::onOk()
{
+ setIsApplyAndClose( true );
if ( onApply() )
- onCancel();
+ ClickOnCancel();
}
-
-
//=================================================================================
// function : onApply()
// purpose :
}
-//=================================================================================
-// function : onCancel()
-// purpose :
-//=================================================================================
-void RepairGUI_ShapeProcessDlg::onCancel()
-{
- GEOMBase_Skeleton::ClickOnCancel();
-}
-
-
//=================================================================================
// function : selectionChanged()
// purpose : Called when selection as changed or other case
//=================================================================================
void RepairGUI_ShapeProcessDlg::selectionChanged()
{
- reset();
-
- Standard_Boolean aRes = Standard_False;
+ reset();
+
+ LightApp_SelectionMgr* aSelMgr = myGeomGUI->getApp()->selectionMgr();
+ SALOME_ListIO aSelList;
+ aSelMgr->selectedObjects(aSelList);
+
int i = 0;
- myObjects->length( IObjectCount() );
- for ( SALOME_ListIteratorOfListIO anIt( selectedIO() ); anIt.More(); anIt.Next() )
- {
- GEOM::GEOM_Object_var aSelectedObject = GEOMBase::ConvertIOinGEOMObject( anIt.Value(), aRes );
- if ( !CORBA::is_nil( aSelectedObject ) && aRes )
- myObjects[i++] = aSelectedObject;
+ myObjects->length(aSelList.Extent());
+ for (SALOME_ListIteratorOfListIO anIt (aSelList); anIt.More(); anIt.Next()) {
+ GEOM::GEOM_Object_var aSelectedObject = GEOMBase::ConvertIOinGEOMObject( anIt.Value() );
+ if ( !CORBA::is_nil( aSelectedObject ) )
+ myObjects[i++] = aSelectedObject;
}
myObjects->length( i );
if ( i == 1 )
}
-//=================================================================================
-// function : deactivate()
-// purpose :
-//=================================================================================
-void RepairGUI_ShapeProcessDlg::deactivate()
-{
- //myGeomGUI->SetState( -1 );
- GEOMBase_Skeleton::DeactivateActiveDialog();
-}
-
-
//=================================================================================
// function : activate()
// purpose :
void RepairGUI_ShapeProcessDlg::activate()
{
GEOMBase_Skeleton::ActivateThisDialog();
- connect(((SalomeApp_Application*)(SUIT_Session::session()->activeApplication()))->selectionMgr(),
- SIGNAL(currentSelectionChanged()), this, SLOT(selectionChanged()));
-
+ connect( ( (SalomeApp_Application*)( SUIT_Session::session()->activeApplication( ) ))->selectionMgr(),
+ SIGNAL( currentSelectionChanged() ), this, SLOT( selectionChanged() ) );
+
reset();
//myGeomGUI->SetState( 0 );
initSelection();
// function : enterEvent()
// purpose : Mouse enter onto the dialog to activate it
//=================================================================================
-void RepairGUI_ShapeProcessDlg::enterEvent(QEvent* e)
+void RepairGUI_ShapeProcessDlg::enterEvent( QEvent* )
{
- if ( !GroupConstructors->isEnabled() )
+ if ( !mainFrame()->GroupBoxName->isEnabled() )
activate();
}
-//=================================================================================
-// function : closeEvent()
-// purpose : same than click on cancel button
-//=================================================================================
-void RepairGUI_ShapeProcessDlg::closeEvent(QCloseEvent* e)
-{
- //myGeomGUI->SetState( -1 );
- GEOMBase_Skeleton::closeEvent( e );
-}
-
-
//=================================================================================
// function : reset()
// purpose : Completely reset the state of method including local context
void RepairGUI_ShapeProcessDlg::reset()
{
myObjects = new GEOM::ListOfGO();
- myObjects->length( 0 );
- mySelectWdgt->LineEdit1->setText("");
+ myObjects->length( 0 );
+ mySelectWdgt->LineEdit1->setText( "" );
}
// function : get_convert
// purpose : conversion of angle values to radians (non-angle values are not converted)
//=================================================================================
-const char* get_convert( const char* theParam, const char* theValue )
+const char* get_convert( const char* theParam, const QString& theValue )
{
- if ( !strcmp( theParam, "SplitAngle.Angle" ) )
- {
- double doubleValue = atof( theValue ) * PI / 180;
- TCollection_AsciiString str( doubleValue );
- return CORBA::string_dup( str.ToCString() );
+ if ( !strcmp( theParam, "SplitAngle.Angle" ) ) {
+ double doubleValue = theValue.toDouble() * M_PI / 180.;
+ return CORBA::string_dup( QString::number( doubleValue ).toLatin1().constData() );
}
- return CORBA::string_dup( theValue );
+ return CORBA::string_dup( theValue.toLatin1().constData() );
}
//=================================================================================
// function : set_convert
// purpose : conversion of angle values to degrees (non-angle values are not converted)
//=================================================================================
-const char* set_convert( const char* theParam, const char* theValue )
+QString set_convert( const char* theParam, const char* theValue )
{
- if ( !strcmp( theParam, "SplitAngle.Angle" ) )
- {
- double doubleValue = atof( theValue ) * 180 / PI;
- TCollection_AsciiString str( doubleValue );
- return CORBA::string_dup( str.ToCString() );
+ if ( !strcmp( theParam, "SplitAngle.Angle" ) ) {
+ Kernel_Utils::Localizer loc;
+ double doubleValue = atof( theValue ) * 180. / M_PI;
+ return QString::number( doubleValue );
}
- return CORBA::string_dup( theValue );
+ return QString( theValue );
}
//=================================================================================
anOp->GetShapeProcessParameters( anOperators, aParams, aValues );
// check the default items-operators
- int i;
- for ( i = 0; i < anOperators->length(); i++ )
- {
+ for ( int i = 0; i < anOperators->length(); i++ ) {
//MESSAGE("-->"<<(const char*)anOperators[i]);
- QListViewItem* anItem = myOpList->findItem( (const char*)anOperators[i], 0 );
- if ( anItem /*&& anItem->inherits( "QCheckListItem" )*/ )
- ((QCheckListItem*) anItem)->setOn( true );
+ QList<QListWidgetItem*> items = myOpList->findItems ( (const char*)anOperators[i], Qt::MatchFixedString );
+ if ( items.count() )
+ ( items[0] )->setCheckState( Qt::Checked );
}
// Retrieve default parameters for ALL operators
- for ( QListViewItemIterator it(myOpList); it.current(); ++it ) {
- CORBA::String_var anOperator = CORBA::string_dup( it.current()->text( 0 ).latin1() );
+ for ( int i = 0; i < myOpList->count(); i++ ) {
+ CORBA::String_var anOperator = CORBA::string_dup( myOpList->item( i )->text().toLatin1().constData() );
anOp->GetOperatorParameters( anOperator.in(), aParams, aValues );
// set default values of parameters
if ( aParams->length() != aValues->length() )
continue;
- for ( i = 0; i < aParams->length(); i++ ) {
- QWidget* aCtrl = getControl( (const char*)aParams[i] );
- const char* aValue = set_convert( (const char*)aParams[i], aValues[i] );
- setValue( aCtrl, aValue );
+
+ for ( int j = 0; j < aParams->length(); j++ ) {
+ QWidget* aCtrl = getControl( (const char*)aParams[j] );
+ setValue( aCtrl, set_convert( (const char*)aParams[j], aValues[j] ) );
}
}
}
// function : setValue()
// purpose : set value in the proper way
//=================================================================================
-void RepairGUI_ShapeProcessDlg::setValue( QWidget* theControl, const char* theValue )
+void RepairGUI_ShapeProcessDlg::setValue( QWidget* theControl, const QString& theValue )
{
- if ( theControl == NULL || theValue == NULL )
- return;
-
- if ( theControl->isA( "QtxDblSpinBox" ) )
- ((QtxDblSpinBox*)theControl)->setValue( QString( theValue ).toDouble() );
- else if ( theControl->isA( "QSpinBox" ) )
- ((QSpinBox*)theControl)->setValue( QString( theValue ).toInt() );
- else if ( theControl->isA( "QComboBox" ) )
- ((QComboBox*)theControl)->setCurrentText( QString( theValue ) );
- else if ( theControl->isA( "QCheckBox" ) )
- ((QCheckBox*)theControl)->setChecked( QString( theValue ).toInt() != 0 );
+ if ( theControl && !theValue.isNull() ) {
+ if ( qobject_cast<SalomeApp_DoubleSpinBox*>( theControl ) )
+ qobject_cast<SalomeApp_DoubleSpinBox*>( theControl )->setValue( theValue.toDouble() );
+ else if ( qobject_cast<SalomeApp_IntSpinBox*>( theControl ) )
+ qobject_cast<SalomeApp_IntSpinBox*>( theControl )->setValue( theValue.toInt() );
+ else if ( qobject_cast<QComboBox*>( theControl ) )
+ qobject_cast<QComboBox*>( theControl )->setEditText( theValue );
+ else if ( qobject_cast<QCheckBox*>( theControl ) )
+ qobject_cast<QCheckBox*>( theControl )->setChecked( theValue.toInt() != 0 );
+ }
}
//=================================================================================
// function : getValue()
// purpose : get value in the proper way
//=================================================================================
-const char* RepairGUI_ShapeProcessDlg::getValue( QWidget* theControl ) const
+QString RepairGUI_ShapeProcessDlg::getValue( QWidget* theControl ) const
{
- if ( theControl == NULL )
- return "";
-
- if ( theControl->isA( "QtxDblSpinBox" ) )
- return ((QtxDblSpinBox*)theControl)->text().latin1();
- else if ( theControl->isA( "QSpinBox" ) )
- return ((QSpinBox*)theControl)->text().latin1();
- else if ( theControl->isA( "QComboBox" ) )
- return ((QComboBox*)theControl)->currentText().latin1();
- else if ( theControl->isA( "QCheckBox" ) )
- return ((QCheckBox*)theControl)->isChecked() ? "1" : "0";
-
- return "";
+ if ( theControl ) {
+ if ( qobject_cast<SalomeApp_DoubleSpinBox*>( theControl ) )
+ return QString::number( qobject_cast<SalomeApp_DoubleSpinBox*>( theControl )->value() );
+ else if ( qobject_cast<SalomeApp_IntSpinBox*>( theControl ) )
+ return QString::number( qobject_cast<SalomeApp_IntSpinBox*>( theControl )->value() );
+ else if ( qobject_cast<QComboBox*>( theControl ) )
+ return qobject_cast<QComboBox*>( theControl )->currentText();
+ else if ( qobject_cast<QCheckBox*>( theControl ) )
+ return qobject_cast<QCheckBox*>( theControl )->isChecked() ? "1" : "0";
+ }
+ return 0;
+}
+
+//=================================================================================
+// function : getText()
+// purpose : get text in the proper way
+//=================================================================================
+QString RepairGUI_ShapeProcessDlg::getText( QWidget* theControl ) const
+{
+ if ( theControl ) {
+ if ( qobject_cast<SalomeApp_DoubleSpinBox*>( theControl ) )
+ return qobject_cast<SalomeApp_DoubleSpinBox*>( theControl )->text();
+ else if ( qobject_cast<SalomeApp_IntSpinBox*>( theControl ) )
+ return qobject_cast<SalomeApp_IntSpinBox*>( theControl )->text();
+ }
+ return QString::null;
}
//=================================================================================
//=================================================================================
bool RepairGUI_ShapeProcessDlg::isValid( QString& msg )
{
+ bool ok = true;
+ QMapIterator<QString,QStringList> aMapIter( myValMap );
+ while( aMapIter.hasNext() ) {
+ aMapIter.next();
+ const QStringList& aList = aMapIter.value();
+ QListIterator<QString> aListIter( aList );
+ while( aListIter.hasNext() ) {
+ const QString& aParam = aListIter.next();
+ QWidget* aControl = getControl( aParam );
+ if ( qobject_cast<SalomeApp_DoubleSpinBox*>( aControl ) )
+ ok = qobject_cast<SalomeApp_DoubleSpinBox*>( aControl )->isValid( msg, !IsPreview() ) && ok;
+ else if ( qobject_cast<SalomeApp_IntSpinBox*>( aControl ) )
+ ok = qobject_cast<SalomeApp_IntSpinBox*>( aControl )->isValid( msg, !IsPreview() ) && ok;
+ }
+ }
+
bool error = false;
GEOM::string_array_var anOperators = getActiveOperators();
- if ( !myObjects->length() )
- {
+ if ( !myObjects->length() ) {
msg += tr( "ERROR_NO_OBJECTS" );
error = true;
}
- if ( !anOperators->length() )
- {
+ if ( !anOperators->length() ) {
if ( error )
msg += "\n";
msg += tr( "ERROR_NO_OPERATORS" );
error = true;
}
- return !error;
+ return !error && ok;
}
//=================================================================================
/*//-- check --
int z;
- MESSAGE("Objects : ");
- for ( z = 0; z < myObjects->length(); z++ )
- MESSAGE(myObjects[z]->GetName() << " ");
- MESSAGE("\nOperators : ");
- for ( z = 0; z < anOperators->length(); z++ )
- MESSAGE(anOperators[z] << " ");
- MESSAGE("\nParameters : ");
- for ( z = 0; z < aParams->length(); z++ )
- MESSAGE(aParams[z] << " ");
- MESSAGE("\nValues : ");
- for ( z = 0; z < aValues->length(); z ++ )
- MESSAGE(aValues[z] << " ");
- MESSAGE("\n");
+ MESSAGE("Objects : ");
+ for ( z = 0; z < myObjects->length(); z++ )
+ MESSAGE(myObjects[z]->GetName() << " ");
+ MESSAGE("\nOperators : ");
+ for ( z = 0; z < anOperators->length(); z++ )
+ MESSAGE(anOperators[z] << " ");
+ MESSAGE("\nParameters : ");
+ for ( z = 0; z < aParams->length(); z++ )
+ MESSAGE(aParams[z] << " ");
+ MESSAGE("\nValues : ");
+ for ( z = 0; z < aValues->length(); z ++ )
+ MESSAGE(aValues[z] << " ");
+ MESSAGE("\n");
*/// -----------
QStringList anErrorObjNames;
- for ( int i = 0; i < myObjects->length(); i++ )
- {
+ for ( int i = 0; i < myObjects->length(); i++ ) {
GEOM::GEOM_Object_var obj = myObjects[i];
- GEOM::GEOM_Object_var anObj = GEOM::GEOM_IHealingOperations::_narrow( getOperation() )->ProcessShape(
- obj, anOperators, aParams, aValues );
+ GEOM::GEOM_IHealingOperations_var anOper = GEOM::GEOM_IHealingOperations::_narrow( getOperation() );
+ GEOM::GEOM_Object_var anObj = anOper->ProcessShape( obj, anOperators, aParams, aValues );
if ( anObj->_is_nil() )
anErrorObjNames << GEOMBase::GetName( obj );
else
+ {
+ if ( !IsPreview() )
+ {
+ QStringList aParameters;
+
+ for ( int i = 0; i < anOperators->length(); i++ )
+ aParameters << QString( anOperators[i] );
+
+ for ( int i = 0; i < aParams->length(); i++ )
+ aParameters << QString( aParams[i] );
+
+ aParameters << getTexts( aParams );
+ anObj->SetParameters(aParameters.join(":").toLatin1().constData());
+ }
objects.push_back( anObj._retn() );
+ }
}
if ( !anErrorObjNames.empty() )
- MESSAGE("ERRORS occured while processing the following objects: " << anErrorObjNames.join( " " ));
+ MESSAGE( "ERRORS occured while processing the following objects: " << anErrorObjNames.join( " " ).toLatin1().data() );
return anErrorObjNames.size() < myObjects->length(); // true if at least one object was OK, false if ALL objects were nil after Healing.
}
GEOM::string_array* RepairGUI_ShapeProcessDlg::getActiveOperators()
{
GEOM::string_array_var anOperators = new GEOM::string_array();
- QStringList aCheckedList;
- QStringList::Iterator it;
- for ( it = myOpLst.begin(); it != myOpLst.end(); ++it )
- if ( ((QCheckListItem*)myOpList->findItem( *it, 0 ))->isOn() )
- aCheckedList << *it;
- anOperators->length( aCheckedList.size() );
- int i = 0;
- for ( it = aCheckedList.begin(); it != aCheckedList.end(); ++it )
- anOperators[i++] = CORBA::string_dup( (*it).latin1() );
-
+ QStringList aCheckedList;
+
+ for ( int i = 0; i < myOpList->count(); i++ ) {
+ if ( myOpList->item( i )->checkState() == Qt::Checked )
+ aCheckedList << myOpList->item( i )->text();
+ }
+
+ anOperators->length( aCheckedList.count() );
+
+ for ( int i = 0; i < aCheckedList.count(); i++ )
+ anOperators[i] = CORBA::string_dup( aCheckedList[i].toLatin1().constData() );
+
return anOperators._retn();
}
// function : getcontrol
// purpose :
//=================================================================================
-QWidget* RepairGUI_ShapeProcessDlg::getControl( const char* theParam )
+QWidget* RepairGUI_ShapeProcessDlg::getControl( const QString& theParam )
{
- string aParam = theParam;
- if ( aParam == "SplitAngle.Angle" ) return mySplitAngleAngle;
- else if ( aParam == "SplitAngle.MaxTolerance" ) return mySplitAngleMaxTol;
- else if ( aParam == "SplitClosedFaces.NbSplitPoints" ) return mySplitClosedFacesNum;
- else if ( aParam == "FixFaceSize.Tolerance" ) return myFixFaceSizeTol;
- else if ( aParam == "DropSmallEdges.Tolerance3d" ) return myDropSmallEdgesTol3D;
- else if ( aParam == "BSplineRestriction.SurfaceMode" ) return myBSplineSurfModeChk;
- else if ( aParam == "BSplineRestriction.Curve3dMode" ) return myBSpline3DCurveChk;
- else if ( aParam == "BSplineRestriction.Curve2dMode" ) return myBSpline2DCurveChk;
- else if ( aParam == "BSplineRestriction.Tolerance3d" ) return myBSplineTol3D;
- else if ( aParam == "BSplineRestriction.Tolerance2d" ) return myBSplineTol2D;
- else if ( aParam == "BSplineRestriction.RequiredDegree" ) return myBSplineDegree;
- else if ( aParam == "BSplineRestriction.RequiredNbSegments" ) return myBSplineSegments;
- else if ( aParam == "BSplineRestriction.Continuity3d" ) return myBSpline3DCont;
- else if ( aParam == "BSplineRestriction.Continuity2d" ) return myBSpline2DCont;
- else if ( aParam == "SplitContinuity.Tolerance3d" ) return mySplitContTol3D;
- else if ( aParam == "SplitContinuity.SurfaceContinuity" ) return mySplitContSurfCont;
- else if ( aParam == "SplitContinuity.CurveContinuity" ) return mySplitContCurvCont;
- else if ( aParam == "ToBezier.SurfaceMode" ) return myToBezierSurfModeChk;
- else if ( aParam == "ToBezier.Curve3dMode" ) return myToBezier3DCurveChk;
- else if ( aParam == "ToBezier.Curve2dMode" ) return myToBezier2DCurveChk;
- else if ( aParam == "ToBezier.MaxTolerance" ) return myToBezierMaxTol;
- else if ( aParam == "SameParameter.Tolerance3d" ) return mySameParameterTol3D;
- else if ( aParam == "FixShape.Tolerance3d" ) return myFixShapeTol3D;
- else if ( aParam == "FixShape.MaxTolerance3d" ) return myFixShapeMaxTol3D;
- return NULL;
+ if ( theParam == "SplitAngle.Angle" ) return mySplitAngleAngle;
+ else if ( theParam == "SplitAngle.MaxTolerance" ) return mySplitAngleMaxTol;
+ else if ( theParam == "SplitClosedFaces.NbSplitPoints" ) return mySplitClosedFacesNum;
+ else if ( theParam == "FixFaceSize.Tolerance" ) return myFixFaceSizeTol;
+ else if ( theParam == "DropSmallEdges.Tolerance3d" ) return myDropSmallEdgesTol3D;
+ else if ( theParam == "BSplineRestriction.SurfaceMode" ) return myBSplineSurfModeChk;
+ else if ( theParam == "BSplineRestriction.Curve3dMode" ) return myBSpline3DCurveChk;
+ else if ( theParam == "BSplineRestriction.Curve2dMode" ) return myBSpline2DCurveChk;
+ else if ( theParam == "BSplineRestriction.Tolerance3d" ) return myBSplineTol3D;
+ else if ( theParam == "BSplineRestriction.Tolerance2d" ) return myBSplineTol2D;
+ else if ( theParam == "BSplineRestriction.RequiredDegree" ) return myBSplineDegree;
+ else if ( theParam == "BSplineRestriction.RequiredNbSegments" ) return myBSplineSegments;
+ else if ( theParam == "BSplineRestriction.Continuity3d" ) return myBSpline3DCont;
+ else if ( theParam == "BSplineRestriction.Continuity2d" ) return myBSpline2DCont;
+ else if ( theParam == "SplitContinuity.Tolerance3d" ) return mySplitContTol3D;
+ else if ( theParam == "SplitContinuity.SurfaceContinuity" ) return mySplitContSurfCont;
+ else if ( theParam == "SplitContinuity.CurveContinuity" ) return mySplitContCurvCont;
+ else if ( theParam == "ToBezier.SurfaceMode" ) return myToBezierSurfModeChk;
+ else if ( theParam == "ToBezier.Curve3dMode" ) return myToBezier3DCurveChk;
+ else if ( theParam == "ToBezier.Curve2dMode" ) return myToBezier2DCurveChk;
+ else if ( theParam == "ToBezier.MaxTolerance" ) return myToBezierMaxTol;
+ else if ( theParam == "SameParameter.Tolerance3d" ) return mySameParameterTol3D;
+ else if ( theParam == "FixShape.Tolerance3d" ) return myFixShapeTol3D;
+ else if ( theParam == "FixShape.MaxTolerance3d" ) return myFixShapeMaxTol3D;
+ return 0;
}
//=================================================================================
//=================================================================================
void RepairGUI_ShapeProcessDlg::initParamsValues()
{
+ if ( myOpLst.count() )
+ return; // already filled
+
myOpLst << "FixShape";
myValMap["FixShape"] << "FixShape.Tolerance3d";
myValMap["FixShape"] << "FixShape.MaxTolerance3d";
//=================================================================================
GEOM::string_array* RepairGUI_ShapeProcessDlg::getParameters( const GEOM::string_array& theOperators )
{
- GEOM::string_array_var aParams = new GEOM::string_array();
- int i( 0 ), j( 0 );
-
- // calculate the length of parameters
- for ( i = 0, j = 0; i < theOperators.length(); i++ )
- j+= myValMap[QString((const char*)theOperators[i])].size();
-
- // set the new length of paremeters
- aParams->length( j );
+ GEOM::string_array_var aParams = new GEOM::string_array();
+ int i = 0, j = 0;
- // fill the parameters
- for ( i = 0, j = 0; i < theOperators.length(); i++ )
- {
- QStringList aValLst = myValMap[QString( (const char*)theOperators[i] )];
- for ( QStringList::Iterator it = aValLst.begin(); it != aValLst.end(); ++it )
- aParams[j++] = CORBA::string_dup( (*it).latin1() );
- }
+ // calculate the length of parameters
+ for ( i = 0, j = 0; i < theOperators.length(); i++ )
+ j += myValMap[ QString( theOperators[i] ) ].size();
+
+ // set the new length of paremeters
+ aParams->length( j );
+
+ // fill the parameters
+ for ( i = 0, j = 0; i < theOperators.length(); i++ ) {
+ QStringList aValLst = myValMap[ QString( theOperators[i] ) ];
+ for ( QStringList::Iterator it = aValLst.begin(); it != aValLst.end(); ++it )
+ aParams[j++] = CORBA::string_dup( (*it).toLatin1().constData() );
+ }
- return aParams._retn();
+ return aParams._retn();
}
GEOM::string_array_var aValues = new GEOM::string_array();
aValues->length( theParams.length() );
- for ( int i = 0; i < theParams.length(); i++ )
- {
+ for ( int i = 0; i < theParams.length(); i++ ) {
QWidget* aCtrl = getControl( (const char*)theParams[i] );
if ( aCtrl )
aValues[i] = get_convert( (const char*)theParams[i], getValue( aCtrl ) );
return aValues._retn();
}
+//=================================================================================
+// function : getTexts
+// purpose :
+//=================================================================================
+QStringList RepairGUI_ShapeProcessDlg::getTexts( const GEOM::string_array& theParams )
+{
+ QStringList aTexts;
+
+ for ( int i = 0; i < theParams.length(); i++ ) {
+ QWidget* aCtrl = getControl( (const char*)theParams[i] );
+ if ( aCtrl )
+ {
+ QString aText = getText( aCtrl );
+ if( !aText.isNull() )
+ aTexts.append( aText );
+ }
+ }
+
+ return aTexts;
+}
+
//=================================================================================
// function : initSelection
// purpose : set selection of ALL shape types except vertexes
//=================================================================================
void RepairGUI_ShapeProcessDlg::advOptionToggled( bool on )
{
- QButton* btn = (QButton*)sender();
- if ( on && btn->isToggleButton() &&
- QMessageBox::warning( SUIT_Session::session()->activeApplication()->desktop(), tr( "GEOM_WRN_WARNING" ), tr( "TIME_CONSUMING" ), QMessageBox::Yes, QMessageBox::No ) == QMessageBox::No )
+ QAbstractButton* btn = (QAbstractButton*)sender();
+ if ( on && btn->isCheckable() &&
+ SUIT_MessageBox::warning( this,
+ tr( "GEOM_WRN_WARNING" ), tr( "TIME_CONSUMING" ),
+ SUIT_MessageBox::Yes | SUIT_MessageBox::No ) == SUIT_MessageBox::No )
btn->toggle();
}